Primata II - Thorn Lighting

Transcription

Primata II
Flexible and versatile continuous
row trunking system for commercial
and industrial applications
Contents
3 Primata II - an introduction
4/5 Applications
6 Fast, safe, simple, cost effective and flexible
7 PEC programme
8
Tool-free installation
9 Electrical configuration
10 Three-phase system
11 Complete control
12 Special accessories
13 How to specify a Primata II lighting system
14 Brackets and suspension (Step 1)
15 Trunking (Step 2)
16/17 Trunking accessories (Step 2)
18 T16 Luminaires (Step 3)
19 T26 Luminaires (Step 3)
20/21 White refectors (Step 4)
22/23 Aluminium reflectors (Step 4)
24/25 Basic housing with mirror optics (Step 4)
26/27 Basic housing with louvre optics (Step 4)
28 Basic housing accessories (Step 4)
30/31 Optional extras (Step 5)
32/33 Photometric data
34/35/36 Specification sheet
37 Configuration sheet
Primata II
Pre-wired trunking systems
save time and money. They
are increasingly popular in
today’s cost-sensitive market
because they are quick and
easy to assemble, and
simple to install without
special tools
Primata II, with its simple,
consistent tool-free mounting
and electrical connection, can
reduce installation times by up
to 40% compared with
conventional products. It is a
pre-wired continuous row system
with a comprehensive selection
of fluorescent luminaires and
various optics.
Primata II offers a number of
valuable benefits:
• Simple, tool-free installation
saves time and money
• Pre-wired trunking improves
electrical safety
• Wide range of reflectors, optics
and accessories ensures a
perfect match for virtually any
project and application
• Choice of wiring configurations
up to 9-pole can support
optional functions including
mains power supply, dimming
and emergency lighting
Applications
Industry and Production
Primata II is an ideal solution
in large working areas where
uniform illumination is vital. As
well as providing efficient and
economical output, its precise
glare control means that
Primata II can be installed in
areas where VDT screens are
used. A new IP60 (dust-tight)
protected lamp enclosure
ensures safety and continued
performance.
Summary of benefits:
• Efficient and economical
• Uniform illumination
• Glare control in areas where
VDT screens are used
• Dust protected lamp version
• Safety
Warehouses and Distribution
Primata II offers energy efficient
solutions for warehouses and
storage areas, through its
combination of high output light
sources, precisely calculated
and designed optics, and a
choice of narrow or wide beam
distributions.
• High light output promotes clear
visibility and safety
• Precise direction of light
• Choice of narrow or wide
beam distribution
Supermarkets, Hypermarkets
and Commercial Areas
Primata II is a versatile solution
that helps to create a comfortable
shopping experience in
customer-facing areas of all types
and sizes. Its glare-free light,
with asymmetric distribution
for shelf illumination, provides
customer comfort and presents
products to maximum advantage.
The ability to include spotlights,
offers additional scope for accent
lighting.
• Glare free light for customer
comfort
• Precise direction of light
• Asymmetric distribution for
shelf lighting
• The ability to integrate
spotlights for accent lighting
• Visual comfort and ambience
to create a pleasant shopping
environment
Trade Centres and Exhibition Halls
Primata II offers a dynamic
solution to nearly any site. It
can be easily adapted to any
layout, and the right optical
performance ensures visitor
comfort and optimum presentation
of individual stands. Its energy
efficiency makes it the preferred
system for owners and end users.
• Economical, glare-free light
• Flexibility to adapt to changing
space layouts
• Comfort and ambience
to create a stimulating
environment for visitors
Fast, safe, simple, cost effective and flexible
– it’s the logical choice
Easy to configure and install,
Primata II is the ideal choice for
applications where quality, efficiency
and versatility are essential
Primata II is a tried and proven
solution. It’s quick and easy
to install, uses latest lamp
technologies to save energy,
reduces maintenance, and
delivers output that’s comfortable
and adaptable to a wide range
of requirements.
Fast
Lighting installations with
Primata II can be completed
within 40% of the time required
for single luminaire installations
Safe
Primata II is pre-wired and tested,
so good electrical connectivity
and site safety are built-in
Simple
Primata II can be installed by
non-skilled labour, without special
tools, however the final electrical
connection must be carried out by
a qualified electrician
Cost effective
Primata II is the cost effective
solution that benefits installers
and end users alike
Flexible
Primata II is available in versions
with up to 9-poles for mains
power supply, dimming and
emergency operation. Optics
are available for virtually
every application, and can
be interchanged to suit any
application
Performance, Efficiency, Comfort
The aim of Thorn Lighting is to improve quality
of life by lighting people and places. Supporting
this mission is our PEC programme, through which
we deliver efficient and reliable lighting and
contribute to a healthy and comfortable environment
The PEC programme is based
on the three main factors in a
lighting installation which affect
the quality of life and our natural
environment:
Performance: Providing the
best visual effectiveness
Efficiency: Minimising the use
of energy
Comfort: Giving people
satisfaction and stimulation
These principles are embodied in
the way we design our products
as well as individual lighting
schemes. By addressing all three
factors we can make a dramatic
improvement in the quality of life.
Primata II has been designed
to fulfil all criteria for achieving
PEC in today’s demanding
environments, from its choice
of light sources and simple
installation to its virtually unlimited
flexibility. Consistent, tool-free
installation, plus a wide range of
optics and integrated dimming
and emergency options, make it a
powerful tool in the drive towards
lower costs and higher workplace
efficiency.
Performance
Efficiency
Comfort
Providing the best
visual effectiveness
Primata II has been designed
for optimum performance in
a wide range of applications,
from industry and production
to supermarkets and shops. Its
overall flexibility, together with
the optical performance of its
many attachments, can easily
be tailored to any lighting task.
Its precisely calculated reflectors
offer efficient and economical
lighting, and asymmetric reflectors
provide wall-washing or uniform
vertical illumination.
Minimising the use
of energy
Energy efficient artificial lighting
helps to reduce carbon dioxide
emissions into the atmosphere,
and Primata II uses the latest
technologies to set the pace in
environmental sensitivity. With
the latest lamp technology such
as T16 high output and high
efficiency lamps, LOR’s of up
to 95% and electronic and
dimmable control gear, Primata II
is perfectly prepared for this task.
Giving people satisfaction
and stimulation
With its choice of different louvre
optics and other attachments,
Primata II can provide the
right combination of glare
control, direct lighting and
indirect distribution to create
a comfortable and productive
environment.
These are just some of the
‘lighting tools’ which are
incorporated into the Primata II
concept. Equally important, the
fittings can be interchanged to
respond to changes in space
design or function. This is a truely
versatile system. As well as the
optics on individual luminaires,
entire luminaires can be replaced
by track modules when a new
lighting scheme requires 3-phase
spotlighting, for example.
Time is another resource which
Primata II can save. Its consistent,
tool-free installation method
offers enormous benefits for the
installer, enabling more jobs to be
completed within the same time
frame. For end users, too,
Primata II can enable a
refurbishment to be completed far
earlier than using conventional
lighting concepts.
The system can also incorporate
lighting and emergency controls.
Available as options in 7-pole
and 9-pole systems, these offer
huge advantages in terms of
reduced maintenance and
increased user friendliness, with
straightforward installation.
The secret is Primata II’s
pre-wired trunking, which
already incorporates all
necessary components. Now, a
state-of-the-art lighting solution
with integrated lighting and
emergency controls can be fitted
as easily as a conventional
system.
Tool-free installation
1
3
4
Each component of a Primata
II installation is pre-built in the
factory. Work on site is simply a
matter of snapping the modules
together. Untrained personnel can
do this using their two-hands. No
tools are required and rates of
installation and productivity are
impressive.
4. Easy positioning and tool-free
installation of the luminaire
1. After the suspension element
is fixed to the ceiling (wire
suspension shown on this
example), the trunking simply
snaps onto the brackets.
2. Just a simple push and the
pre-wired trunking is securely
installed. Tool-free electrical
and mechanical connection
has been made between
trunkings, due to its patented
connector system.
3. C
onvenient phase selection
inside the luminaire
2
5
6
7
8
9
10
5. E
lectrical and mechanical
connection by one single
operation – just rotating the
turnbuckle
6. O
ptics can now be installed
via a simple snap-on
mechanism
7. Just press the optic towards
the system and the springloaded fixation mechanism
retains it immediately
8. A
fter attaching reflector end
caps and couplers are put
on, lamps can be fitted
9. V
arious louvres or optics
can be conveniently added
without the use of any tools
10. C
ongratulations – you have
just completed your first
Primata II installation!
Electrical configuration
5-pole
5-poles configured for
three-phase operation: Primata II
supports ‘load sharing’ to triple
the maximum length of a
continuous run, compared to
standard single-phase
environments. This is possible
because each phase can be used
to maximum loading. In addition,
Primata II provides separate
circuits which can be switched
independantly for very basic
lighting control. Compatible
luminaires include CP - Switch
Start Compensated, NC - Switch
Start Non-Compensated and HF.
7-pole
enhances 5-pole capabilities by
supporting additional dimming
and/or standard emergency
or SelfTest emergency lighting.
These options are available with
dimming and emergency versions
HFD, HF E3, HF E3T, HFD E3,
HFD E3T.
L1
D1
L2
D2
L3
L1
N
L2
E
L3
N
**
E
EN
D1
D2
EL
L1
Unswitched L1
L2
L2
L3
L3
N
N
E
**
LUMINAIRE HFD
LUMINAIRE CP, NC or HF
**
LUMINAIRE HF E3 or E3T
E
**
LUMINAIRE HFD E3 or E3T
D1
D2
EL
EN
L1
L2
L3
N
E
**
LUMINAIRE HF EX3
connection to the
* Electrical
system if phase 2 or 3 selected
Electrical safety
Primata II uses dedicated
connectors to achieve perfect
electrical connections with
optimum safety. There are
no complicated electrical
connections and no terminal
blocks between luminaires and
wiring. The turnbuckle mechanism
ensures that once a connection is
made, it stays secure.
Standards
Designed and manufactured
to comply with EN 60598
Emergency version
EN 60598.2.22
Class I Electrical
IP20
IP40 with IP40 kit
IP60 Industrial fitting
(in preperation)
9-pole
can incorporate high-end
emergency lighting. It is the
ultimate in multi-functional (HF
E3X) trunking and management.
Three-phase system
For high load applications the
three-phase design of Primata II
offers enormous benefits. Every
luminaire can be set to pick one
of the phases by using a simple
selector tab at the connector.
Because this flexibility allows
long uninterrupted runs,
Primata II is the perfect solution
for large buildings or long,
narrow transport areas.
Max load
Maximum load recommendation
for Miniature Circuit Breakers
(MCB)
For lighting installations the use of
C type MCBs is recommended.
The following table gives some
typical values (recommendations)
and is valid for one pole MCBs
(single phase application) and a
supply voltage of 230V.
These benefits are possible
because of the characteristics of
three-phase power. A balanced
three-phase load minimises the
‘reactive power’ (kVA) drawn
from the mains, reducing the
amount of energy consumed.
In addition, each luminaire is
connected to one of the three
phases, so most luminaires can
be turned off at night or during
periods of low requirement, while
maintaining sufficient illumination
in critical areas.
When using multi-pole MCBs
(3-phase application) the number
of ballasts has to be reduced by
20%.
The table on right shows the
maximum number of fittings which
can be installed dependant on
wattage and MCB.
MCB
C10
C13 200
160
120
80
Voltage (V)
40
0
0
2
4
6
8
10
12
14
16
18
20
-40
-80
-120
-160
-200
-240
Time (milliseconds)
L1
L1
L1
10
The sum of the currents on the three phases is zero
at any time, therefore for a balanced load, the return
current down the common neutral is zero as well
B10
B13
B16
1x36
2x36
1x58
2x58
T26
T26
T26
T26
NC
39
47
622328
37
NC
1923
31
11
14
18
NC25
30
40
15
1824
NC
12
1520
7
9
12
1x36
2x36
1x58
2x58
T26
T26
T26
T26
CP
54
66
87
32
39
51
CP27
33
43
16
1925
CP
35
42
562025
33
CP
172128
10
12
16
1x36
2x36
1x58
2x58
T26
T26
T26
T26
HF
38
52
60
HF24
32
38
HF
36
50
60
HF
162226
1926
12
16
1825
8
11
1x36
2x36
1x58
2x58
T26
T26
T26
T26
HFD
34
44
HFD2226
HFD26
32
HFD2224
60
32
42
30
1722
30
11
13
16
13
1621
11
12
15
1x28
2x28
1x35
2x35
T16
T16
T16
T16
HF
44
78
HF
1828
HF
46
80
HF20
30
8022
30
9
8023
30
10
1x54
2x54
1x80
2x80
T16
T16
T16
T16
HF
HF
HF
HF
1x28
2x28
1x35
2x35
1x54
T16
T16
T16
T16
T16
HFD
34
44
HFD2226
HFD
34
44
HFD2226
HFD26
32
62
32
62
32
42
1722
31
11
13
16
1722
31
11
13
16
13
1621
2x54 T16 HFD2026
1x80 T16 HFD2226
2x80 T16 HFD
9
11
30
30
13
10
11
4
30
46
50
142024
1828
30
8
12
14
NC - Switch Start Non-Compensated
CP - Switch Start Compensated
HF - High Frequency
HFD - High Frequency Dimmable
240
C16 39
14
40
15
30
19
30
13
40
15
40
15
152325
7
10
12
9
14
15
4
6
7
13
13
6
15
15
7
Complete control
Dimming
Lighting can be responsible for
more than 20% of total electricity
consumption. In office buildings it
can account for as much as half
of total energy costs. The use of
lighting controls can reduce this
figure by up to 25%, encouraging
users to minimise wasteful use of
light and make the maximum use
of natural light using presence
and/or daylight linked controls.
This approach is in line with
energy regulations such as the
Energy Performance of Buildings
Directive (EPBD) which is
driving energy saving initiatives
throughout Europe.
Primata II is designed to support
advanced indoor lighting controls
without any additional installation
effort.
Emergency
Just like fire protection systems,
emergency lighting is potentially
life saving – provided it is
properly maintained. Increasingly
stringent legal requirements
require owners to inspect,
test and maintain emergency
lighting in workplaces and public
buildings.
Primata II offers a wide range of
compliant solutions. Its emergency
product range includes basic (E3)
self-contained luminaires as well
as SelfTest (E3T) and Addressable
test (E3X) emergency luminaires
which are fully compliant with
European Standards. The E3T
and E3X systems deliver complete
peace of mind and safety without
the need for costly and time
consuming manual testing by
a competent person. Primata II
can incorporate these luminaires
without any additional effort.
The following emergency options are available to suit varying requirements and budgets. The comparison
table should help to decide which option is best for you, considering the project environment:
E3
Self contained
E3T
SelfTest
E3X
Addressable test
No
Yes
Yes
EN 1838 (BS5266) compliance Yes
Yes
Yes
Automatic testing
Fault Indication
Locally via LED on luminaire
(battery charging only)
Locally via LED on luminaire
Centrally logged on Control Panel
Fault Reports Generated
Manually
Manually
Printed or via SMS text
Programmable
No
No
Yes
Addressable
No
No
Yes
Typical Application
Small to medium installations
where manual checking is no
problem for the user. For example:
small storage areas, warehouses,
workshops, shops, etc.
Small to medium areas where
automatic testing is beneficial but
visual inspection of the luminaire is
easily possible, such as galleries,
supermarkets, offices, lower and
medium industrial facilities, etc
Medium and large sized projects
where visual inspection of luminaires
is impractical or undesirable. For
example: Universities, schools
and colleges, museums, large
stores, supermarkets, DIY centres,
offices, higher industrial facilities,
warehouses, etc.
11
More than just a trunking
system - special accessories
Track Module
The use of spotlights for accent lighting within a general lighting system
is becoming increasingly popular in supermarkets, shops, showrooms
and other spaces where items are on display. The Primata II Track
Module enables spotlighting to be incorporated into a Primata II
installation. Solutions such as Graffiti spotlights are highly effective.
The Track Module maintains the modular design of the rest of the
Primata II family and can therefore be easily integrated into any
lighting design. It can also be removed and used elsewhere when
the floor plan or lighting design is changed, without requiring trained
electricians.
Presence Detector
An integrated Presence Detector module enables Primata II luminaires
to be switched on only when needed. This is the simplest way to reduce
energy consumption.
Angle connectors
Primata II L, T and X trunking connectors allow designers to create
various shapes within continuous row systems.
IP60 Industrial Optic
In environments where airborne particles can leave deposits on
lamps and reflectors, high IP ratings are essential to maintain LOR
performance. Primata II with the IP60 (dust-tight) Industrial Optic
offers this protection, extending cleaning and maintenance intervals,
maintaining output levels, and reducing costs. It is an outstanding
choice for any manufacturing application, including the automotive
industry.
12
How to specify a
Primata II lighting system
The specification sheet will guide
you through the ordering process
of any Primata II configuration
and will make sure that you don’t
miss that vital part – it’s very easy
and most convenient!
Step 1
Suspension brackets
Select suspension brackets, which will be suitable for your application
or building/installation environment. Turn to page 14 for Step 1
Ordering Guides.
Step 2
Trunking and electrical connection
Select trunking with 5, 7 or 9-pole wiring depending on which
luminaire is to be used. Make sure the modularity of the trunking/
wiring specified matches the luminaire. Specify all other accessories,
which might be needed in conjunction with the trunking or wiring
(couplers, electrical connection, etc.) Turn to pages 15, 16 and 17 for
Step 2 Ordering Guides.
Using the fold out specification sheet
At the back of the brochure you
will find a fold out page which
will give you a logical ordering
flow. You can use this when
browsing through the pages of the
brochure to specify all the right
parts for your individual system.
Just simply follow Step 1 – 4
(or even 5 if additional
accessories are wanted) to
complete your ordering list.
Step 3
Luminaires
Specify the luminaire to go with the system, depending on the
functionality (dimming, emergency) you need and wattage, which was
considered when selecting the pre-wired trunking. If IP40 is required for
the system, please select the correct IP40 kit. Turn to pages 18 and 19
for Step 3 Ordering Guides.
Step 4
Optics
Depending on what kind of light distribution or level of glare control is
required within the application, select the particular optic in the right
wattage. Dedicated end caps and couplers to be specified as well.
Turn to pages 20 - 29 for Step 4 Ordering Guides.
Step 5
Optional Extras
Additional accessories such as spotlight modules or presence
detectors can also be specified. The only exception within the ordering
process is the Industrial Optic IP60, where no separate luminaire or
end caps etc. need to be specified (supplied as a complete fitting).
Turn to pages 30 and 31 for Step 5 Ordering Guides.
13
Brackets and suspension
Direct ceiling installation
Caddy clip
Chain suspension bracket
Adjustable chain suspension
Suspension chain (per metre)
Bracket for angled installation
Wire suspension kit
Catenary wire suspension
Fixing brackets
• Chain suspension brackets for
angled installation, to allow
axial rotation
Brackets and Suspension Ordering Guide
(for complete luminaire follow ordering steps 1-5)
• All fixing brackets attach
tool-free to the trunking via
a snap-on mechanism and a
common stainless-steel
quick-fix bracket
• Direct ceiling installation
• Caddy clip bracket for
fastening on exposed
ceiling carrier systems of
24mm - 26mm
• Chain suspension brackets,
adjustable (FIX/CHA) and non
adjustable triangle (FIX/CH)
and galvanised suspension
chain (CH) which is supplied
in metres
• Maximum distance between
suspension brackets is 3 metres
14
Step 1
• Wire suspension kits in three
different lengths for tool-free
height adjustment via clutch
mechanism
• Catenary wire suspension for
catenary wires up to 12mm
diameter
Specification
To specify state: Fixing bracket
for trunking systems.
As Thorn Primata II...
Description SAP Code
Direct Ceiling Installation Clip
PR2 FIX**
96502601
Caddy Clip PR2 FIX/CAD**
96502602
Chain suspension PR2 FIX/CH**
Chain suspension bracket
96502603
PR2 FIX/CHA**
Adjustable chain suspension bracket 96502604
PR2 CH
Suspension chain (per meter)
96502605
PR2 FIX/CHRA**
Bracket for angled installation (for axial rotation)
96502606
Wire suspension kits
PR2 MSW1 1000
1m wire suspension 96502607
PR2 MSW1 20002m wire suspension 96502608
PR2 MSW1 5000
5m wire suspension 96502609
Catenary wire suspension
PR2 FIX/CAT*
96502610
* For catenary wires up to 12mm diameter
** One bracket per code
Trunking
Step 2
Pre-wired Trunking Ordering Guide
Description Weight (Kg)
SAP Code
5-pole
Modular length for 1 fitting
PR2 T TW 1226 5x2,5/36
1.896502611
PR2 T TW 1526 5x2,5/582.296502612 PR2 T TW 1175 5x2,5/28/54
1.896502613
PR2 T TW 1475 5x2,5/35/49/802.296502614
Pre-wired trunking
Un-wired trunking
• Pre-wired trunking with 5, 7 or
9-pole wiring integrated
• Un-wired trunking for installing
other Primata II accessories or
different luminaires
• Wires in 2.5mm2
• Electrical connection
points in modular distance
for 36/58/28/54 or
35/49/80W
• Tool-free connection with unique
connector (to be ordered
separately)
• Tool-free connection with unique
connector (to be ordered
separately)
Specification
To specify state: Unwired
trunking. As Thorn Primata II T
Materials/Finish
Trunking: roll-formed sheet steel
pre-painted white
Installation/Mounting
Trunking prepared for easy
mechanical and electrical
connection
Specification
To specify state: 5, 7 or 9-pole,
2.5mm2, pre-wired trunking with
electrical connection points in
modular distance for use with
trunking system. As Thorn Primata
II T TW
1175/350/355
1475/950/445
Modular length for 2 fittings
PR2 T TW 2452 5x2,5/36
396502623
PR2 T TW 3052 5x2,5/58
3.896502624 PR2 T TW 2350 5x2,5/28/54
396502625
PR2 T TW 2950 5x2,5/35/49/80
3.896502626 Modular length for 3 fittings
PR2 T TW 3678 5x2,5/36
4.296502635
PR2 T TW 4578 5x2,5/58
5.496502636
PR2 T TW 3525 5x2,5/28/54
4.296502637
PR2 T TW 4425 5x2,5/35/49/80
5.496502638
7-Pole
PR2 T TW 1226 7x2,5/362.0596502615
PR2 T TW 1526 7x2,5/582.596502616
PR2 T TW 1175 7x2,5/28/542.0596502617
PR2 T TW 1475 7x2,5/35/49/802.596502618
PR2 T TW 2452 7x2,5/36
3.596502627
PR2 T TW 3052 7x2,5/58
4.496502628
PR2 T TW 2350 7x2,5/28/54
3.596502629
PR2 T TW 2950 7x2,5/35/49/80
4.496502630
PR2 T TW 3678 7x2,5/36
4.9596502639
PR2 T TW 4578 7x2,5/58
6.396502640
PR2 T TW 3525 7x2,5/28/54
4.9596502641
PR2 T TW 4425 7x2,5/35/49/80
6.396502642
9-Pole
51
PR2 T TW 1526 9x2,5/582.896502620
PR2 T TW 1475 9x2,5/35/49/802.896502622
PR2 T TW 3052 9x2,5/58
596502632
PR2 T TW 2950 9x2,5/35/49/80
596502634
60
T16 trunking
PR2 T TW 4578 9x2,5/58
7.296502644
PR2 T TW 4425 9x2,5/35/49/80
7.296502646
16/45/3678
156/305/4578
51
Un-wired Trunking Ordering Guide
Description PR2 T 1526
PR2 T 3052
PR2 T 4578
Weight (Kg)
1.6
3.2
4.8
SAP Code
96502651
96502652
96502653
60
T26 trunking
15
Trunking accessories
Trunking couplers
300
58
• Coupler for mechanical tool-free connection of trunking
243
58
86
399
• 90° L, T and X couplers for mechanical
tool-free connection of trunking
Materials/Finish
Coupler: galvanised steel with plastic cover (L, T and X only)
Couplers for mechanical connection of trunking without the
use of any tools
Specification
To specify state: Trunking coupler (or L, T, X coupler) for
trunking system.
As Thorn Primata II T-C (L, T, X)
Trunking end cap
• White plastic end caps for trunking ends to provide
neat appearance and perfect alignment
• Tool-free and easy assembling
• Knock-out holes for cable entry
Specification
To specify state: Plastic end-cap for trunking system.
As Thorn Primata II ECP
Grommet
• Rubber grommet to use on knock-outs at the back
of the trunking to protect cable
Specification
To specify state: Rubber grommet for trunking system.
As Thorn Primata II GRM
Cover strip
• Plastic cover strip in luminaire length to allow
modular installation on pre-wired trunking (gaps in luminaires)
• 850°C fire retardant
Specification
To specify state: Plastic cover strip in modular length.
As Thorn Primata II CF
16
58
243
399
86
86
243
58
399
Step 2
Mains terminal – Electrical feed
Cable Fixings
• Power feed for electrical connection for 5, 7
and 9-pole pre-wired trunking
• Cable cleat to fix additional
internal wiring (CC)
• Plug-in terminals for mains power supply,
dimming and emergency
• Cable clip to secure
additional cables on top of
the trunking (TCC)
• For 5-pole or 7-pole in conjunction with dimming, use
PR2 TB/TRU 5/7 DIM
• For 7-pole in conjunction with emergency use PR2 TB/TRU 5/7 EM
• For 9-pole use PR2 TB/TRU 9
Specification
To specify state: Electrical feed for 5, 7 and 9-pole pre-wired
trunking for trunking systems. As Thorn Primata II TB/TRU
CC
TCC
Additional wiring
• Additional 2-pole wiring set for 7-pole pre-wired trunking,
to upgrade systems at a later date
• Wires in 2.5 mm2
• Electrical connection points in modular distance
for 36/58/28/54 or 35/49/80W
Specification
To specify state: 2-pole, 2.5mm2, additional wiring with electrical
connection points in modular distance for use with trunking systems.
As Thorn Primata II TW
Ordering Guide
Description
Weight (Kg) SAP Code
Trunking Couplers
PR2 T-C TRUNKING COUPLER 0.3 96502654
PR2 T-CL L CONNECTOR 0.5 96502655
PR2 T-CT T CONNECTOR 0.7 96502656
PR2 T-CX X CONNECTOR 0.7 96502657
Trunking Endcaps
PR2 ECP
- 96502664
Grommet PR2 GRM
- 96502663
Cover Strip
PR2 CF 36
0.2 96502643
PR2 CF 58
0.2 96502665
PR2 CF 28/54
0.2 96502645
PR2 CF 35/49/80
0.2 96502666
Mains terminal block for 5 and 7-pole
PR2 TB/TRU 5/7 DIM - 96502658
PR2 TB/TRU 5/7 EM 96502660
Mains terminal block for 9-pole
PR2 TB/TRU 9
- 96502659
Additional wiring PR2 TW 2x2,5/36
0.3 96502647
PR2 TW 2x2,5/58
0.3 96502648
PR2 TW 2x2,5/28/54
0.3 96502649
PR2 TW 2x2,5/35/49/80
0.3 96502650
Cable fixings PR2 CC CABLE CLEAT (INSIDE TRUNKING) - 96502661
PR2 TCC CABLE CLIP (ON TOP OF TRUNKING) - 96502662
17
T16 Luminaires
• Available in single and twin
lamp (narrow) versions, where
both versions can mostly use
the same optic
• High-frequency ballasts
• Modular design
accommodates options for
lighting management and
emergency lighting
• Simple phase selection for
power supply and emergency/
dimming circuits
• Tool-free installation
• Thorn turnbuckles ensure
electrical and mechanical
connection in one step
Step 3
Lamps
28-80W T16 (FDH) linear
fluorescent, Cap: G5
Materials/Finish
Body: pre-painted white
roll-formed sheet steel
Lamp holder: injection moulded
white plastic
Luminaire prepared for easy
installation into pre-wired trunking,
luminaire attaches to trunking by
two turnbuckles, providing instant
electrical connection via fixed plug
and socket system, phase selection
at connector, optics easily clipped
onto luminaire if required.
Specification
To specify state: Single or twin
(narrow) 28-80W T16 linear
fluorescent luminaire for use with
5, 7 or 9-pole Primata trunking
system and optics. As Thorn
Primata II T16 luminaire.
IP40 Kit for T16 luminaires:
Can be fitted to any T16 luminaire
or optic to increase the protection
class to IP40. Two IP40 Kits have
to be ordered per luminaire/optic.
T16 single luminaire
T16 twin luminaire
T16 Luminaire Ordering Guide Lamp(s) to be ordered separately
Description Ilcos
Code
Socket Weight (Kg)
SAP Code Emergency
SelfTest Addressable Test
E3
E3T
E3X
High Frequency
PR2 1/28W T16 HF
FDH
G5
0.9
96502704
-
-
-
PR2 1/35W T16 HF
FDH
G5
1
96502705
96502714
96502720 96502726
PR2 1/49W T16 HF
FDH
G5
1
96502706
96502715
96502721 96502727
PR2 1/54W T16 HF
FDH
G5
1
96502707
-
-
-
PR2 1/80W T16 HF
FDH
G5
1.1
96502708
96502716
96502722 96502728
PR2 2/28W T16 HF
FDH
G5
1.1
96502709
-
-
-
PR2 2/35W T16 HF
FDH
G5
1.2
96502710
96502717
96502723 96502729
PR2 2/54W T16 HF
FDH
G5
1.1
96502711
-
-
-
PR2 2/49W T16 HF
FDH
G5
1.2
96502712
96502718
96502724 96502730
PR2 2/80W T16 HF
FDH
G5
1.2
96502713
96502719
96502725 96502731
High Frequency Dimmable PR2 1/28W T16 HFD
FDH
G5
1
96502732
-
-
-
PR2 1/35W T16 HFD
FDH
G5
1.1
96502733
96502742
96502748
-
PR2 1/49W T16 HFD
FDH
G5
1.1
96502734
96502743
96502749
-
PR2 1/54W T16 HFD
FDH
G5
1.1
96502735
-
-
-
PR2 1/80W T16 HFD
FDH
G5
1.2
96502736
96502744
96502750
PR2 2/28W T16 HFD
FDH
G5
1.2
96502737
-
-
-
PR2 2/35W T16 HFD
FDH
G5
1.3
96502738
96502745
96502751
PR2 2/54W T16 HFD
FDH
G5
1.2
96502739
-
-
-
PR2 2/49W T16 HFD
FDH
G5
1.3
96502740
96502746
96502752
PR2 2/80W T16 HFD
FDH
G5
1.3
96502741
96502747
96502753
-
IP40 Kit T16 (two needed per luminaire)
PR2 IP40 KIT 1/T16
-
-
-
96502669
-
-
PR2 IP40 KIT 2/T16
-
-
-
96502670
-
-
18
4
9
16
60
T16 single/twin luminaire
T26 Luminaires
Step 3
• Single and twin lamp versions
– can be used with dedicated
optics
Lamps
36-58W T26 (FD) linear
fluorescent, Cap: G13
• Magnetic or high-frequency
ballasts
Materials/Finish
Body: roll-formed sheet steel
pre-painted white
Lamp holder: injection moulded
white plastic
• Modular design
accommodates options for
lighting management and
emergency lighting
power supply and emergency/
dimming circuits
• Thorn turnbuckles ensure
connection in one step
Specification
To specify state: Single or
twin 36-58W T26 linear
fluorescent luminaire for use
with 5, 7 or 9-pole trunking
system and optics. As Thorn
Primata II T26 luminaire.
Luminaire prepared for easy
installation into pre-wired
trunking. Luminaire attaches to
trunking by two turnbuckles,
providing instant electrical
connection via fixed plug and
socket. System phase selection at
connector. Optics easily clipped
onto luminaire, if required.
IP40 Kit for T26 luminaires:
Can be fitted to any T26
luminaire or optic to increase
the protection class to IP40. Two
IP40 Kits have to be ordered for
a single lamp luminaire. Four kits
for a twin lamp type.
T26 twin luminaire
T26 Luminaires Ordering Guide Lamp(s) to be ordered separately
Description Ilcos
Code
Socket Weight (Kg) SAP Code Emergency SelfTest E3
E3T
AddressableTest
E3X
Magnetic ballasts
PR2 1/36W T26 CP
FD
G13
1.6
96502674
-
-
PR2 1/58W T26 CP
FD
G13
1.7
96502675
-
-
-
PR2 2/36W T26 CP
FD
G132.1
96502676
-
-
PR2 2/58W T26 CP
FD
G132.7
96502677
-
-
-
PR2 1/36W T26 NC
FD
G13
1.6
96502678
-
-
PR2 1/58W T26 NC
FD
G13
1.7
96502679
-
-
-
PR2 2/36W T26 NC
FD
G132.1
96502680
-
-
PR2 2/58W T26 NC
FD
G132.7
96502681
-
-
-
53
53
60
136
T26 twin luminaire
High Frequency
PR2 1/36W T26 HF
FD
G13
1.2
96502682 96502686
PR2 1/58W T26 HF
FD
G13
1.3
96502683 96502687
96502690 96502692
PR2 2/36W T26 HF
FD
G13
1.5
96502684 96502688
-
PR2 2/58W T26 HF
FD
G13
1.7
96502685 96502689
96502691 96502693
High Frequency Dimmable PR2 1/36W T26 HFD
FD
G13
1.5
96502694 96502698
-
-
PR2 1/58W T26 HFD
FD
G13
1.7
96502695 96502699
96502702
PR2 2/36W T26 HFD
FD
G13
1.8
96502696 96502700
-
-
PR2 2/58W T26 HFD
FD
G132
96502697 96502701
96502703
IP40 Kit T26*
PR2 IP40 KIT T26
-
-
-
96502668
-
-
-
*Two needed per single and four needed per twin lamp luminaire
CP - Compensated, NC - Non-compensated
19
White reflectors
• Suitable for T16 and T26 single
and twin lamp luminaires
(see pages 18 and 19)
• White plastic couplers and end
caps provide neat appearance
and perfect alignment
Coupler for R and RLW
• White plastic coupler for
reflector PR2 R and PR2 RLW to
provide neat appearance and
perfect alignment
• Simple, tool-free assembly
• One pair needed per junction
End cap for R and RLW
• White plastic end cap for
reflector PR2 R and PR2 RLW to
provide neat appearance and
perfect alignment
One pair needed per housing or
uninterrupted continuous run
End cap for RA
• White plastic end caps for
reflector PR2 RA to provide
neat appearance
• One pair needed per housing
Materials/Finish
Reflector: sheet steel, white
pre-painted finish
End caps and couplers: injection
moulded white finish
Unique ‘snap-in’ mechanism
enables easy tool-free installation
onto luminaire
Specification
To specify state:
White reflector for single or twin
T16 and T26 luminaire for use
with trunking system.
As Thorn Primata II R
Specification
To specify state:
White reflector with white
louvre grille for single or twin
T16 and T26 luminaire for
use with trunking system.
As Thorn Primata II RLW
Specification
To specify state:
White asymmetric reflector
for single/twin T16 or single
T26 luminaire for use with
trunking system.
As Thorn Primata II RA
• Ideally suited to low mounting
in industrial or utility areas
which require high levels of
uniform light
• Asymmetric reflectors for
illumination of vertical surfaces
White Reflectors Ordering Guide
For complete luminare follow ordering steps 1-5
SAP Code
White Reflector
For use with single T26 luminaires
PR2 R 1x36
1.2
96502754
PR2 R 1x58
1.5
96502755
For use with twin T26 luminaires
PR2 R 2x36
1.7
96502756
PR2 R 2x582.1
96502757
For use with single or Twin T16 luminaires
PR2 R 1/2x28/54
1.1
96502758
PR2 R 1/2x35/49/80
1.4
96502759
White Reflector with white louvres
PR2 RLW 1x362.4
96502760
PR2 RLW 1x582.9
96502761
PR2 RLW 2x36
3.6
96502762
PR2 RLW 2x58
4.5
96502763
For use with single or twin T16 luminaires
PR2 RLW 1/2x28/542.3
96502764
PR2 RLW 1/2x35/49/802.8
96502765
Coupler for R and RLW
PR2 R-C 1xT26 1/2xT16 Pair
96502844
PR2 R-C 2xT26 Pair
96502845
End Cap for R and RLW
PR2 R-EC 1xT26 1/2xT16 Pair
96502846
PR2 R-EC 2xT26 Pair
96502847
White Asymmetric Reflector
PR2 RA 1x36
1.4
96502766
PR2 RA 1x58
1.8
96502767
For use with single or twin T16 versions
PR2 RA 1/2x28/54
1.3
96502768
PR2 RA 1/2x35/49/80
1.7
96502769
Couplers for R and RLW
20
End caps for R and RLW
End caps for RA
End Cap for RA
PR2 RA-EC Pair
96502848
** (one pair needed per housing or uninterrupted continuous run)
Step 4
51
51
58
58
164
164
T16 white reflector, single or twin
T26 white reflector, single
51
51
58
58
74
164
T16 white reflector with white louvre, single or twin
T26 white reflector, twin
51
51
87
80
87
T16 asymmetric white reflector, single or twin
170
T26 white reflector with white louvre, single
51
80
83
T26 white reflector with white louvre, twin
51
87
87
T26 asymmetric white reflector, single
21
Aluminium reflectors
and twin lamp luminaires
• One-piece aluminium reflector
in Mirrorbrite finish provides
excellent optical control
• Ideally suited to high mounting
in industrial and lower retail
areas with demanding visibility
requirements
• Wall washer for uniform
vertical illumination
• Reflectors overlap to provide
visually continuous system, no
need for seperate end caps or
couplers
Aluminium Reflector Ordering Guide
SAP Code Aluminium Reflector Wide Beam
PR2 WB 1x36
0.696502770
PR2 WB 1x58
0.796502771
PR2 WB 2x36
0.796502772
PR2 WB 2x58
0.896502773
PR2 WB 1/2x28/54
0.696502774
PR2 WB 1/2x35/49/80
0.796502775
Materials/Finish
Reflector: roll-formed aluminium
Mirrorbrite finish
Reflector clips easily and tool-free
onto luminaire via stainless steel
bracket. Reflectors designed to
overlap, ensuring perfect fit and
alignment.
Specification
To specify state:
Wide beam Mirrorbrite
aluminium reflector for single/
twin T16 and T26 luminaires
for use with trunking system. As
Thorn Primata II WB.
Specification
To specify state:
Narrow beam Mirrorbrite
aluminium reflector for single/
twin T16 and T26 luminaires
for use with trunking system. As
Thorn Primata II NB.
Specification
To specify state:
Wallwasher Mirrorbrite aluminium
reflector for single/twin T16 and
single T26 luminaires for use with
trunking system. As Thorn
Primata II WA
22
Aluminium Reflector Narrow Beam For use with single T26 luminaires
PR2 NB 1x36
0.796502776
PR2 NB 1x58
0.896502777
PR2 NB 2x36
0.896502778
PR2 NB 2x58
0.996502779
PR2 NB 1/2x28/54
0.796502780
PR2 NB 1/2x35/49/80
0.896502781
Aluminium Wallwasher For use with single T26 luminaires
PR2 WA 1x36
0.696502782
PR2 WA 1x58
0.796502783
PR2 WA 1/2x28/54
0.696502784
PR2 WA 1/2x35/49/80
0.796502785
Step 4
51
51
7
76
129
113
T16 aluminium wide beam reflector,
single or twin
T26 aluminium wide beam reflector, single
51
51
96
78
175
39
T16 aluminium narrow beam reflector,
single or twin
T26 aluminium wide beam reflector, twin
51
51
50
9
110
141
15
T16 aluminium reflector, wallwasher,
single or twin
T26 aluminium narrow beam reflector, single
51
85
315
T26 aluminium narrow beam reflector, twin
51
66
115
40
T26 aluminium reflector, wallwasher, single
23
Basic housings with
mirror optics
• Suitable for T16 and/or T26
single and twin lamp luminaires
• Choice of wide, asymmetric
or double-sided asymmetric
reflectors
caps available to provide neat
appearance (see page 28)
• Ideal solutions for supermarkets
and hyper-markets applications
and shelf lighting
Basic housing with mirror optics Ordering Guide
Description Basic housing with wide beam optics Weight (Kg) SAP Code
PR2 HWB 1x362.5
96502792
PR2 HWB 1x58
3
96502793
PR2 HWB 2x36
3.4
96502794
PR2 HWB 2x58
4.3
96502795
PR2 HWB 1/2x28/542
96502796
PR2 HWB 1/2x35/49/802.4
96502797
Materials/Finish
Housing: sheet steel,
white pre-painted
Integrated reflector: roll-formed
Satinbrite aluminium
moulded white plastic
Unique ‘snap-in’ mechanism
onto luminaire
Specification
To specify state: White basic
housing with integrated wide
beam Satinbrite aluminium
reflector for single/twin T16
and T26 luminaires for use with
trunking system.
As Thorn Primata II HWB
Specification
housing with integrated
asymmetric Satinbrite aluminium
reflector for single T26 luminaires
for use with trunking system.
As Thorn Primata II HA
Specification
housing with integrated doublesided asymmetric Satinbrite
aluminium reflector for twin
T26 luminaires for use with
trunking system.
As Thorn Primata II HAD
24
Basic housing with asymmetric mirror optics (single T26 only)
PR2 HA 1x362.5
96502798
PR2 HA 1x58
3
96502799
Basic housing with double sided asymmetric mirror (twin T26 only)
PR2 HAD 2x36
3.4
96502800
PR2 HAD 2x58
4.3
96502801
Step 4
51
51
95
66
113
T16 wide beam mirror, single or twin
173
T26 wide beam mirror, single
51
95
83
T26 wide beam mirror, twin
51
95
173
T26 asymmetric mirror, single
51
95
83
T26 double sided asymmetric mirror, twin
25
Basic housings with
louvre optics
and twin lamp luminaires (see
page 18 and 19)
• Choice of white painted
steel, perforated white steel,
Satinbrite aluminium or
Mirrorbrite aluminium louvres to
control glare
• Satinbrite and Mirrorbrite
louvres comply with EN 12464
guidelines for modern VDT
screens (depending on the
wattage used with the optic)
caps available to provide neat
appearance (see page 28)
• Ideally suited to retail,
commercial and production
areas with VDT screens
• Microperforated versions
create a more comfortable
environment with additional
ambient lighting
Materials/Finish
Housing: sheet steel, white
pre-painted with roll-formed
aluminium reflector inserts
Louvre: Satinbrite, Mirrorbrite
aluminium or white painted steel
or perforated
moulded white plastic
26
Unique snap-in mechanism
onto luminaire
Specification
housing with Satinbrite louvre
for single/twin T16 and T26
luminaires for use with trunking
system. As Thorn Primata II HLS
Specification
housing with Mirrorbrite louvre
luminaires for use with
trunking system.
As Thorn Primata II HLM
Specification
housing with white painted steel
louvre for single/twin T16 and
trunking system.
As Thorn Primata II HLW
Specification
To specify state: White
perforated basic housing with
white perforated steel louvre
luminaires for use with
trunking system.
As Thorn Primata II HLW PF
Step 4
Basic housing with louvre optics Ordering Guide
(for complete luminaire follow ordering steps 1-5) Description Weight (Kg) SAP Code Basic housing with Satinbrite louvres For use with single T26 luminaires
PR2 HLS 1x362.7
96502814
PR2 HLS 1x58
3.4
96502815
PR2 HLS 2x36
3.8
96502816
PR2 HLS 2x58
4.6
96502817
PR2 HLS 1/2x28/542
96502818
PR2 HLS 1/2x35/49/802.4
96502819
Basic housing with Mirrorbrite louvres
PR2 HLM 1x362.7
96502820
PR2 HLM 1x58
3.4
96502821
PR2 HLM 2x36
3.8
96502822
PR2 HLM 2x58
4.6
96502823
PR2 HLM 1/2x28/542
96502824
PR2 HLM 1/2x35/49/802.4
96502825
Basic housing with White louvres For use with single T26 luminaires
PR2 HLW 1x36
3.2
96502802
PR2 HLW 1x58
4.1
96502803
PR2 HLW 2x36
5.4
96502804
PR2 HLW 2x58
6.2
96502805
PR2 HLW 1/2x28/542.5
96502806
PR2 HLW 1/2x35/49/802.9
96502807
Perforated basic housing with white perforated louvre For use with single T26 luminaires
PR2 HLW PF 1x36
3.1
96502808
PR2 HLW PF 1x58
4
96502809
PR2 HLW PF 2x36
5.3
96502810
PR2 HLW PF 2x58
6.1
96502811
PR2 HLW PF 1/2x28/542.4
96502812
PR2 HLW PF 1/2x35/49/802.8
96502813
51
51
95
66
113
T16 Satinbrite louvre, single or twin
173
T26 Satinbrite louvre single
51
51
95
66
113
83
T16 Mirrorbrite louvre, single or twin
T26 Satinbrite louvre twin
51
51
66
95
113
173
T16 white louvre single
T26 Mirrorbrite louvre single
51
51
95
67
113
T16 perforated and white perforated louvre
single or twin
83
T26 Mirrorbrite louvre twin
51
95
173
T26 white or perforated housing with white
or perforated louvre, single
51
95
83
T26 white or perforated housing with white
or perforated louvre, twin
27
Basic housings accessories
Step 4
Basic housing accessories Ordering Guide
Description
SAP Code
Coupler for all basic housing optics (one pair needed per junction)
For use with single T26 versions
PR2 H-C 1xT26 Pair
96502849
For use with twin T26 versions
PR2 H-C 2xT26 Pair
96502850
PR2 H-C 1/2xT16 Pair
96502851
Endcaps for all basic housing optics (one pair needed per housing or
uninterrupted continuous run)
28
Coupler for basic
housing optics
End cap for basic
housing optics
• White plastic coupler for all
basic housing optics to provide
neat appearance and perfect
alignment
• White plastic end caps for all
basic housing optics to provide
neat appearance and perfect
alignment
• One pair needed per junction
• One pair needed per housing
or uninterrupted continuous run
For use with single T26 versions
PR2 H-EC 1xT26 Pair
96502852
For use with twin T26 versions
PR2 H-EC 2xT26 Pair
96502853
PR2 H-EC 1/2xT16 Pair
96502854
29
Optional extras
Wire guard
• Suitable for T16 and T26
single and twin lamp
luminaires
• Can be hinged for lamp
replacement
• For mechanical lamp
protection – ideal in low
storage areas
Materials/Finish
Rods: polished galvanised steel
Fixing brackets: aluminium
51
75
Tool-free fixing via two
aluminium brackets
96
T26 wire guard, single
Specification
To specify state: Wire guard
made of polished galvanised
steel for single/twin T16 and
trunking system.
As Thorn Primata II WG
51
75
05
T26 wire guard, twin
51
75
96
T16 Wire guard, single/twin
Spotlight modules
• Module with integrated
three-phase track in modular
lengths
• Standard spotlights for threephase track can be installed
power supply
• Thorn turnbuckles for one-step
connection
Materials/Finish
roll-formed sheet steel, injection
moulded white plastic end parts
1175/1475 - T16
1226/1526 - T26
570/760
Module prepared for easy
installation into pre-wired
trunking, unit attaches to trunking
by two turnbuckles, providing
instant electrical connection via
fixed plug and socket system,
phase selection at connector,
spotlights to be installed as in
any standard three-phase track
system
Specification
To specify state: three-phase
track module in modular lengths,
for use on 5, 7 or 9-pole
trunking system.
As Thorn Primata II TM
Spolight not supplied
Fixing kit for fluorescent
fittings
• Fixing kit for other fluorescent
fittings on unwired trunking (FF)
30
Step 5
Presence detector module
• Module with an integrated
presence detector
• Switching capacity 1200
- 2000W
• Surveillance range: 220°
• Max Distance: 16 metres
• 6 time stages from 1sec.
up to approx. 8mins.
Industrial unit IP60
• Complete single or twin 58W
fitting (no separate luminaire
needs to be ordered)
• High-frequency ballasts
• Integrated aluminium reflector
for symmetrical or asymmetrical
distribution
• IP60 (dust-tight) protected
lamp/reflector area to avoid a
decrease in LOR due to dust
• Convenient tool-free phase
selection
• Plastic cover panel (PC) held by
galvanised frame
• One-step electrical and
mechanical connection via
external turnbuckle
Materials/Finish
roll-formed sheet steel, injection
moulded white plastic end parts
288
Module prepared for easy
installation onto trunking,
electrical connection via piano
key terminal block
167
74
90
Specification
To specify state:
Presence detection module for use
on trunking system.
As Thorn Primata II SLDP
Materials/Finish
Housing: white painted sheet
steel with plastic cover panel
(polycarbonate) held by
galvanised metal frame
51
99
Tool-free installation onto trunking
system via external turnbuckle
mechanism
Specification
To specify state: Complete
1/2x58W luminaire, high
frequency ballast, IP60,
integrated aluminium reflector
for symmetrical/asymmetrical
distribution, polycarbonate cover
panel held by galvanised frame
for tool-free installation for use
with trunking system.
As Thorn Primata II I PC
240
Industrial Optic Ordering Guide
complete fitting - no separate luminaire required. T26 Lamps to be
ordered seperately.
Description Ilcos
Socket Wt (Kg)
SAP Code
Code
Symmetric
PR2 I PC 1x58W HF SYM IP60
FD
G13
7.9
96502826
PR2 I PC 2x58W HF SYM IP60
FD
G13
8.2
96502828
Asymmetric PR2 I PC 2x58W HF ASYM IP60
FD
G13
7.9
96502829
PR2 I PC 1x58W HF ASYM IP60
FD
G13
8.2
96502827
• Ideal solution for dusty
industrial applications and
automotive industry
Optional Extras Ordering Guide
Description Wt (Kg)
SAP Code
Wire Guards
PR2 WG 1x36
1.1
96502838
PR2 WG 1x58
1.5
96502839
PR2 WG 2x36
1.7
96502840
PR2 WG 2x58
1.9
96502841
PR2 WG 1/2x28/54
1
96502842
PR2 WG 1/2x35/49/80
1.4
96502843
Description
Wt (Kg) SAP Code
Spotlight modules 3-phase module 1226
PR2 TM 36
1.2
3-phase module 1526
PR2 TM 58
1.5
3-phase module 1175
PR2 TM 28/54
1.1
3-phase module 1475
PR2 TM 35/49/80 1.4
Presence detector module PR2 SLDP
Fixing kit for other fluorescent fittings
PR2 FF 0.7
96502631
96502671
96502633
96502672
96502673
96502667
31
Photometric data
T16 Luminaires
150°
Cd/1000lm
120°
90°
180 120 60
0°
150°
Cd/1000lm
300 200 100
0°
150°
Cd/1000lm
120°
120°
300 200 100
32
90°
60°
30°
0°
300 200 100
90°
30°
Primata II PR2+HLW PF
Primata
PR2+HLW
PF
Lamp: 1xII35W
T16
Lamp:
35W
T16 0.72 LOR: 0.84
ULOR: 1x
0.12
DLOR:
ULOR: 0.12 DLOR: 0.72 LOR: 0.84
Cd/1000lm
90°
60°
0°
30°
Primata II PR2+WA
Primata
PR2+WA
Lamp: 1xII35W
T16
Lamp:
T161.02 LOR: 1.02
ULOR: 1x
0.035W
DLOR:
ULOR: 0.0 DLOR: 1.02 LOR: 1.02
150°
Cd/1000lm
150°
120°
90°
60°
120°
450 300 150
90°
60°
30°
Primata II PR2+HLS
Primata
PR2+HLS
Lamp:
1xII35W
T16
Lamp: 0.0
1x 35W
T160.74 LOR: 0.74
ULOR:
DLOR:
ULOR: 0.0 DLOR: 0.74 LOR: 0.74
120°
30°
90°
0°
150°
60°
120°
30°
Cd/1000lm
750 500 250
90°
150°
300 200 100
30°
120°
30°
60°
60°
0°
0°
0°
Primata II PR2+R
Primata II PR2+RLW
Lamp: 1x 35W T16
Lamp:
T160.99 LOR: 0.99
ULOR: 1x
0.035W
DLOR:
ULOR: 0.0 DLOR: 0.9 LOR: 0.9
150°
90°
120°
90°
Primata II PR2+NB
Primata
PR2+NB
Lamp:
1xII35W
T16
Lamp: 0.0
1x 35W
T16
ULOR:
DLOR:
0.99 LOR: 0.99
ULOR: 0.0 DLOR: 0.99 LOR: 0.99
150°
120°
30°
30°
60°
30°
90°
60°
150°
60°
120°
60°
30°
450 300 150
150°
60°
30°
Primata II PR2+HWB
Primata
PR2+HWB
Lamp: 1xII35W
T16
Lamp:
T160.85 LOR: 0.85
ULOR: 1x
0.035W
DLOR:
ULOR: 0.0 DLOR: 0.85 LOR: 0.85
Cd/1000lm
120°
90°
60°
150°
Cd/1000lm
150°
300 200 100
90°
120°
30°
Primata II PR2+WB
Primata
PR2+WB
Lamp: 1xII35W
T16
Lamp:
T161.03 LOR: 1.04
ULOR: 1x
0.035W
DLOR:
ULOR: 0.0 DLOR: 1.03 LOR: 1.04
150°
90°
90°
0°
0°
120°
60°
30°
150°
120°
450 300 150
90°
Primata II PR2+R
Primata II PR2+R
Lamp: 1x 35W T16
Lamp:
T160.99 LOR: 0.99
ULOR: 1x
0.035W
DLOR:
ULOR: 0.0 DLOR: 0.99 LOR: 0.99
150°
60°
30°
Primata II PR2+RA
Primata
PR2+RA
Lamp:
1xII35W
T16
Lamp: 0.18
1x 35W
T16 0.75 LOR: 0.93
ULOR:
DLOR:
ULOR: 0.18 DLOR: 0.75 LOR: 0.93
90°
90°
60°
30°
Cd/1000lm
120°
90°
60°
150°
120°
30°
Cd/1000lm
120°
60°
30°
150°
120°
60°
60°
0°
150°
300 200 100
90°
90°
Primata II PR2
Primata II PR2
Lamp: 1x 35W T16
Lamp:
2x 35W
T16 0.75 LOR: 0.99
ULOR: 0.23
DLOR:
ULOR: 0.22 DLOR: 0.75 LOR: 0.97
150°
120°
180 120 60
Cd/1000lm
120°
120°
30°
150°
150°
60°
30°
Primata II PR2
Primata II PR2
Lamp: 1x 35W T16
Lamp: 0.23
1x 35W
T16 0.75 LOR: 0.99
ULOR:
DLOR:
ULOR: 0.23 DLOR: 0.75 LOR: 0.99
90°
90°
90°
60°
30°
Cd/1000lm
120°
120°
60°
150°
150°
60°
30°
0°
30°
Primata II PR2+HLM
Primata
PR2+HLM
Lamp: 1xII35W
T16
Lamp:
T160.76 LOR: 0.76
ULOR: 1x
0.035W
DLOR:
ULOR: 0.0 DLOR: 0.76 LOR: 0.76
T26 Luminaires
150°
Cd/1000lm
150°
120°
90°
120°
120 80
40
0°
150°
Cd/1000lm
120 80
40
90°
0°
Cd/1000lm
60°
30°
0°
Cd/1000lm
90°
90°
0°
Primata II PR2+HAD
Primata II PR2+HAD
Lamp: 2x 58W T26
Lamp:
T260.74 LOR: 0.74
ULOR: 2x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.74 LOR: 0.74
0°
30°
150°
120°
750 500 250
90°
60°
0°
30°
Primata II PR2+WA
Primata II PR2+WA
Lamp: 1x 58W T26
Lamp:
T260.87 LOR: 0.87
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.87 LOR: 0.87
150°
Cd/1000lm
150°
120°
90°
120°
300 200 100
90°
60°
30°
Primata II PR2+HLS
Primata II PR2+HLS
Lamp: 1x 58W T26
Lamp:
T260.60 LOR: 0.60
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.60 LOR: 0.60
Cd/1000lm
30°
60°
30°
0°
60°
90°
60°
30°
90°
120°
300 200 100
60°
120°
150°
120°
90°
Primata II PR2+RLW
Primata II PR2+RLW
Lamp: 1x 58W T26
Lamp:
T260.73 LOR: 0.74
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.73 LOR: 0.74
30°
Primata II PR2+NB
Primata II PR2+NB
Lamp: 1x 58W T26
Lamp:
T260.83 LOR: 0.83
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.83 LOR: 0.83
Cd/1000lm
300 200 100
150°
60°
150°
60°
30°
90°
0°
120°
30°
150°
450 300 150
150°
60°
120°
30°
120°
300 200 100
Cd/1000lm
60°
150°
60°
30°
Primata II PR2+HA
Primata II PR2+HA
Lamp: 1x 58W T26
Lamp:
T260.71 LOR: 0.71
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.71 LOR: 0.71
60°
120°
90°
90°
90°
30°
120°
30°
Primata II PR2+WB
Primata II PR2+WB
Lamp: 1x 58W T26
Lamp:
T260.80 LOR: 0.80
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.80 LOR: 0.80
90°
0°
Cd/1000lm
120°
60°
150°
90°
0°
180 120 60
Primata II PR2+R
Primata II PR2+R
Lamp: 1x 58W T26
Lamp:
T260.83 LOR: 0.83
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.83 LOR: 0.83
150°
300 200 100
150°
90°
60°
150°
120°
30°
120°
30°
120°
450 300 150
Cd/1000lm
150°
60°
30°
60°
150°
120°
90°
90°
90°
60°
0°
Cd/1000lm
120°
90°
Primata II PR2
Primata II PR2
Lamp: 2x 58W T26
Lamp:
58W
T26 0.59 LOR: 0.97
ULOR: 2x
0.38
DLOR:
ULOR: 0.38 DLOR: 0.59 LOR: 0.97
30°
Primata II PR2
Primata II PR2+RA
Lamp: 1x 58W T26
Lamp:
58W
T26 0.67 LOR: 0.96
ULOR: 1x
0.29
DLOR:
ULOR: 0.19 DLOR: 0.63 LOR: 0.82
150°
40
120°
60°
30°
120 80
150°
120°
60°
150°
120°
30°
150°
120°
150°
60°
30°
Primata II PR2
Primata II PR2
Lamp: 1x 58W T26
Lamp:
58W
T26 0.67 LOR: 0.96
ULOR: 1x
0.29
DLOR:
ULOR: 0.29 DLOR: 0.67 LOR: 0.96
90°
90°
60°
30°
Cd/1000lm
120°
90°
60°
150°
60°
30°
0°
30°
Primata II PR2+HLM
Primata II PR2+HLM
Lamp: 1x 58W T26
Lamp:
T260.66 LOR: 0.66
ULOR: 1x
0.058W
DLOR:
ULOR: 0.0 DLOR: 0.66 LOR: 0.66
33
Suspension brackets
Select suspension brackets, which will be suitable for your application
or building/installation environment. Turn to page 14 for Step 1
Ordering Guides.
Trunking and electrical connection
Select trunking with 5, 7 or 9-pole wiring depending on which
luminaire is to be used. Make sure the modularity of the trunking/
wiring specified matches the luminaire. Specify all other accessories,
which might be needed in conjunction with the trunking or wiring
(couplers, electrical connection, etc.) Turn to pages 15, 16 and 17 for
Step 2 Ordering Guides.
Luminaires
Specify the luminaire to go with the system, depending on the
functionality (dimming, emergency) you need and wattage, which was
considered when selecting the pre-wired trunking. If IP40 is required for
the system, please select the correct IP40 kit. Turn to pages 18 and 19
for Step 3 Ordering Guides.
Optics
Depending on what kind of light distribution or level of glare control is
required within the application, select the particular optic in the right
wattage. Dedicated end caps and couplers to be specified as well.
Turn to pages 20 - 29 for Step 4 Ordering Guides.
Optional Extras
Additional accessories such as spotlight modules or presence detectors
can be specified as well. The only exception within the ordering
process is the Industrial Optic IP60, where no separate luminaire or
end caps etc. need to be specified (supplied as a complete fitting).
Turn to pages 30 and 31 for Step 5 Ordering Guides.
Step 1
Direct ceiling
installation
Caddy clip
Chain suspension
bracket
Adjustable chain
suspension
Suspension chain
(per meter)
Bracket for angled
installation
Wire suspension
kits
Catenary wire
suspension
96502601
96502602
96502603
96502604
96502605
96502606
96502607– 209
96502610
Pre-wired trunking
Un-wired trunking
Trunking end cap
Trunking coupler
Trunking coupler L
Trunking coupler T
Trunking coupler X
96502611– 646
96502651– 653
96502664
96502654
96502655
96502656
9650267
T16 Single
T16 Twin
T26 Single
IP40 Kit T16
IP40 Kit T26
96502669 – 670
96502668
Suspension brackets
Step 2
Trunking and
electrical connection
Step 3
T26 Twin
Luminaires
96502700 – 753
Step 4
Optics
T16
Reflectors
T16 Basic
housing
T26
Reflectors
96502674 – 703
T16 White single
or twin
T16 White +
white louvres
single/twin
Couplers
End caps
T16 White asymmetric
single/twin
96502758 – 759
96502764 – 765
96502844 – 845
96502846 – 847
96502768 – 769
T16 Wide beam
mirror single/twin
T16 White louvre
single/twin
T16 Perforated +
white perforated
louvre single/twin
T16 Satinbrite
louvre single/twin
T16 Mirrorbrite
louvre single/twin
Couplers
96502796 – 797
96502806 – 807
96502812 – 813
965028118 – 819
96502824 – 825
96502849 – 851
T26 White single
T26 White twin
T26 White +
white louvres
single
T26 White +
white louvres twin
Couplers
End caps
96502754 – 755
96502756 – 757
96502760 – 761
96502762 – 763
96502844 – 845
96502846 – 847
T26 Wide beam
mirror single
T26 Wide beam
mirror twin
T26 Asymmetric
mirror single
T26 Double sided
asymmetric mirror
twin
T26 White louvre
single
T26 White louvre
twin
T26 Perforated +
white perforated
louvre single
T26 Perforated +
white perforated
louvre twin
96502792 – 793
96502794 – 795
96502798 – 799
96502800 – 801
96502802 – 803
96502804 – 805
96502808 – 809
96502810 – 811
Industrial optic
IP60
Spotlight modules
Presence detector
module
Fixing kit for other
fluorescent fittings
T16 Wire guards
T26 Wire guards
96502826 – 829
96502631
/671/633/672
96502673
96502667
96502842 – 43
96502838 – 41
T26 Basic
housing
Step 5
Optional extras
Grommet
Cover Fillets
Mains terminal
block for dimming
Additional wiring
Cable cleat
Cable clip
96502663
96502643/65/
45/66
96502658– 660
96502647– 650
96502661
96502662
End caps for RA
T16 Wide Beam
single/twin
T16 Narrow Beam
single/twin
T16 Wallwasher
single/twin
96502848
96502774 – 775
96502780 – 781
96502784 – 785
T26 White
asymmetric single
End caps for RA
T26 Wide Beam
single
T26 Wide Beam
twin
T26 Narrow Beam
single
T26 Narrow Beam
twin
T26 Wallwasher
single
96502766 – 767
96502848
96502770 – 771
96502772 – 773
96502776 – 777
96502778 – 779
96502782 – 783
End caps
96502852 – 854
T26 Satinbrite
louvre single
T26 Satinbrite
louvre twin
T26 Mirrorbrite
louvre single
T26 Mirrorbrite
louvre twin
Couplers
End caps
965028114 – 815
965028116 – 817
96502820 – 821
96502822 – 823
96502849 – 851
96502852 – 854
Configuration sheet
PHOTOCOPY BEFORE USE
Please keep this configuration sheet as the original base artwork for you to photocopy from.
Option:
Option:
Product
Step 1
Suspension
brackets
Step 2
Trunking &
electrical
connection
Step 3
Luminaires
Step 4
Optics
Step 5
Optional
extras
SAP Code
Qty
Product
Step 1
Suspension
brackets
Step 2
Trunking &
electrical
connection
Step 3
Luminaires
Step 4
Optics
Step 5
Optional
extras
SAP Code
Qty
Lighting people and places
Thorn Lighting Main Offices
Head Office
Thorn Lighting Limited
Silver Screens, Elstree Way, Borehamwood,
Hertfordshire, WD6 1FE, UK
Tel:
(44) 20 8732 9800
Fax:
(44) 20 8732 9801
Website: www.thornlighting.com
France
Thorn Europhane SA
156 Boulevard Haussmann,
Cedex 08, Paris 75379, France
Tel:
(33) 1 49 53 6262
Fax:
(33) 1 49 53 6240
Website: www.thorn.fr
Australia
Thorn Lighting Pty Limited
13 Cooper Street, P O Box 188, Smithfield,
NSW 2164, Australia
Tel:
(61) 2 9604 4300
Fax:
(61) 2 9604 4588
E-mail:
info@thornlight.com.au
Website: www.thornlight.com.au
Thorn Airfield Lighting
156 Boulevard Haussann,
75379 Paris Cedex 08, France
Tel:
(33) 1 49 53 62 62
Fax:
(33) 1 49 53 62 89
E-mail:
thornairfield@thorn.fr
Website: www.thornairfield.com
Thorn DNT Airfield Lighting Pty Limited
P O Box 548, Unit 2, 7-9 Newcastle Road, Bayswater,
Melbourne, Victoria 3153, Australia
Tel:
(61) 3 9720 3233
Fax:
(61) 3 9720 8233
E-mail:
enquiries@thornlight.com.au
Austria
Thorn Licht GmbH
Donau-City-Straße 11, 1220 Wien, Austria
Tel:
(43) 1 202 66 11
Fax:
(43) 1 202 66 11 12
E-mail:
office@thorn.at
China
Thorn Lighting (Guangzhou) Operations Ltd
No.12 Lian Yun Road, Eastern Section, GETDD,
Guangzhou 510760, China
Tel:
(86) 20 3228 2706
Fax:
(86) 20 3228 1777
E-mail:
sales@thorn.com.cn
Thorn Lighting (Tianjin) Co. Ltd
332 Hongqi Road, Tianjin 300190, China
Tel:
(86) 22 8369 2303
Fax:
(86) 22 8369 2302
E-mail:
marketing@thorntj.com.cn
Czech Republic
Thorn Lighting CS spol. s.r.o.,
Na Březince 6/930, 150 00 Praha 5
Czech Republic
Tel:
(420) 224 315 252
Fax:
(420) 233 326 313
E-mail:
thorn@thornlight.cz
Website: www.thornlight.cz
Denmark
Thorn Lighting A/S
Albuen 44, 6000 Kolding, Denmark
Tel:
(45) 7696 3600
Fax:
(45) 7696 3601
Website: www.thornlight.dk
Estonia
Thorn Lighting
Eesti Filiaal, Tatari 23/25, EE-10116 Tallin, Estonia
Tel:
(372) 656 3505
Fax:
(372) 656 3227
E-mail:
ando@thorn.ee
Hong Kong
Thorn Lighting (Hong Kong) Limited
Unit 4301, Level 43, Tower 1, Metroplaza,
223 Hing Fong Road, Kwai Chung, N.T.,
Hong Kong, China
Tel:
(852) 2578 4303
Fax:
(852) 2887 0247
E-mail:
info@thorn.com.hk
Website: www.thorn.com.hk
Ireland
Thorn Lighting (Ireland) Limited
320 Harold’s Cross Road, Dublin 6W, Ireland
Tel:
(353) 1 4922 877
Fax:
(353) 1 4922 724
E-mail:
enq.dublin@thornlight.com
Italy
Thorn Europhane Spa
Via G Di Vittorio, 2, Cadriano di Granarolo,
Bologna 40057, Italy
Tel:
(39) 051 763391
Fax:
(39) 051 763088
E-mail:
info@thornlighting.it
Website: www.thornlighting.it
Latvia
Thorn Lighting
Representative Office, Skolas Street 21-216,
Riga LV 1010, Latvia
Tel:
(37) 7 332 660
Fax:
(37) 7 332 660
Lithuania
Thorn Lighting
Representative Office, Kalvariju Street 1,
Vilnius 09310, Lithuania
Tel:
(370) 5 2 750 701
Fax:
(370) 5 2 731 480
New Zealand
Thorn Lighting (NZ) Ltd
399 Rosebank Road, P O Box 71134, Rosebank,
Auckland 7, New Zealand
Tel:
(64) 9 828 7155
Fax:
(64) 9 828 7591
Norway
Thorn Lighting AS
Industriveien 11, P O Box 63, Skytta 1483, Norway
Tel:
(47) 6706 2233
Fax:
(47) 6706 0351
E-mail:
s.kvernberg@thornlight.no
Poland
Thorn Lighting Polska Sp.z.o.o.,
Ul. Gazowa 26A, Wrocław 50-513, Poland
Tel:
(48) 71 7833 740
Fax:
(48) 71 3366 029
E-mail:
thorn@thornlight.pl
Website: www.thornlight.pl
Russia
Thorn Lighting
Novoslobodskaya Str., 21, office 406 Business Center
“Novoslobodskaya 21”, Moscow 103030, Russia
Tel:
(7) 495 981 35 41
Fax:
(7) 495 981 35 42
E-mail:
office.moscow@thorn.ru
Website: www.thorn.ru
Thorn Lighting
Representative Office,1 Artilleriyskaya str.,
1 BC ‘Europa House’, St Petersburg 191104, Russia
Tel:
(7) 812 718 8112
Fax:
(7) 812 718 8119
E-mail:
office.petersburg@thorn.ru
Website: www.thorn.ru
Singapore
Thorn Lighting (Singapore) Pte Ltd
5 Kaki Buki Crescent, 04-02 Koyotech Building,
416238 Singapore
Tel:
(65) 6844 5800
Fax:
(65) 6745 7707
E-mail:
info@thornlight.com.sg
Website: www.thornlight.com.sg
Sweden
Thorn Lighting AB
Industrigatan, Box 305,
SE-261 23 Landskrona, Sweden
Tel:
(46) 418 520 00
Fax:
(46) 418 265 74
E-mail:
thorn@thornlight.se
Website: www.thornlight.se
United Arab Emirates
Thorn Lighting Ltd Dubai
Al Shoala Building, Office 301, Block E,
PO Box 1200, Deira, Dubai, UAE
Tel:
(971) 4 2940181
Fax:
(971) 4 2948838
E-mail:
tlluae@emirates.net.ae
Thorn Gulf LLC
Al Shoala Building, Office 301/2,
Block E, PO Box 1200, Deira, Dubai, UAE
Tel:
(971) 4 2948938
Fax:
(971) 4 2948838
E-mail:
thorng@emirates.net.ae
United Kingdom
Silver Screens, Elstree Way,
Borehamwood, Hertfordshire, WD6 1FE, UK
Tel:
(44) 20 8732 9800
Fax:
(44) 20 8732 9801
E-mail:
brochures@thornlight.com
Website: www.thornlighting.co.uk
Thorn Airfield Lighting
Silver Screens, Elstree Way,
Borehamwood, Hertfordshire, WD6 1FE, UK
Tel:
(44) 20 8732 9804
Fax:
(44) 1708 776 285
E-mail:
airfield@thornlight.com or thornagluk@aol.com
International Sales
156 Boulevard Haussmann,
Cedex 08, Paris 75379, France
Tel:
(33) 1 49 53 6262
Fax:
(33) 1 49 53 6240
Silver Screens, Elstree Way, Borehamwood,
Hertfordshire, WD6 1FE, UK
Tel:
(44) 20 8732 9802
Fax:
(44) 1708 741 827
E-mail:
international.sales@thornlight.com
www.thornlighting.com
Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part
of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s General
Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.
Publication No: 389 (INT) Publication Date: 10/06

Primata II - Thorn Lighting

Transcription

Similar documents

Construction

Infrastructure Investment in Mexico: Challenges and Opportunities

Footwear industry - MITSUBISHI CHEMICAL PERFORMANCE

Britco Supplies Disaster Relief Housing for Save the Children

Jose Ometeotl, Willdan Financial

Manises PPP - Private Healthcare Australia

The Philippines: A New Awakening

Primary Care Centres PPP Programme Meet the

Risky Business

PPP Hospitals in Portugal