Waterous Pump Brochure

ENDURANCE ™ I
Waterous has you covered with Total
Integration – a comprehensive program
that ensures fire departments have
everything needed from specification
to implementation. Total Integration
guarantees the right equipment, proper
installation, thorough education and
lifetime support with zero exceptions.
1 - EVALUATE
4 - ORIENTATE
Waterous assesses existing equipment,
short and long term needs, fire scenarios
and other factors to create an accurate, up
to date evaluation of the situation.
Waterous provides thorough equipment
orientation ensuring fire departments
get the best performance with the safest
operation. Waterous also offers the only
CAFS instructors in the industry.
2 - PROPOSE
Waterous studies the data and objectives
to create a fire suppression equipment
specification program that meets the
needs and respects the budget.
3 - IMPLEMENT
Waterous takes proactive measures to
provide the best possible circumstances
for
proper
equipment
installation/
retrofitting for optimum performance and
longevity.
5 - SUPPORT
Waterous backs its equipment with industry
leading warranties, including 5- year
coverage for pumps, 2- year coverage for
Advantus®, 1-year coverage for Aquis™,
lifetime call support on all products, and,
in addition, Waterous offers the Total
Protection Package (TTP-5) that increases
the coverage to include labor expenses to
dismantle, remove and reinstall covered
products or parts.
Corporate Headquarters
125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456
651- 450-5000
www.waterousco.com
F-2606 (10/09)
Contents in this brochure are subject to change without notice.
MIDSHIP
I
PTO
I
ARFF
I
HL SERIES
I
ACCESSORIES
IN THE HEAT OF THE FIRE,
WATEROUS VEHICLE-MOUNTED FIRE PUMPS DELIVER.
Responding to a fire is no time to discover that you have an
unreliable piece of equipment. That’s why more firehouses
around the world depend on Waterous fire pumps than any other
option. With thousands in use, Waterous fire pumps are proven to
be rugged, reliable and revolutionary in design.
Every Waterous fire pump comes with an industry-exclusive
5-year warranty along with the features, accessories
and power fire departments need to suppress the
most dangerous fires.
Never be caught with anything less than the best.
Specify the most trusted fire pump – Waterous.
FOAM SYSTEMS
Aquis™ Foam Proportioner
• Complete aspirated foam system
• Available 1.5 GPM (5.68 l/min) or
Discharge Valve
2.5 GPM (9.46 l/min) @ 150 psi (10 bar) foam output
CONTROL PANEL • Stainless steel paddlewheel flow meter
• Available in 2-1/2 inch standard, 2-1/2 inch full-flow,
• 16-bit mixed signal microcontroller
and 3-1/2 inch sizes
• Blue LED illuminated operator panel
• Available with Rack-and-Sector push/pull controls,
(standard on 2.5 models)
manual worm gear and electric actuators
• Onsite and online laptop diagnostics
• Worm gear and electric actuators comply with
• Maximum operating pressure: 450 psi (32 bar)
NFPA requirements for slow actuation
• All use chrome-plated bronze valve balls
• Lasts longer, resists scratching and scoring from
Advantus® Foam System
sand and grit
• Complete aspirated foam system
•Spring-loaded floating seal assemblies
• Available 3 GPM (11.3 l/min) or 6 GPM
• Seals tight, no adjustments required
(22.6 l/min) @ 150 psi (10 bar) foam output
• Stainless steel manifold
• Hydra-Cell foam pump
Ball-Type Transfer Valve
• 4-sensor technology
• Full-flow brass body check valve
• Available with optional electric actuator
• 16-bit mixed signal microcontroller
• Spring-loaded floating seal does not
• Onsite and online laptop diagnostics
jam due to sand in the water
• Maximum operating pressure: 450 psi (32 bar) *
• Pre-plumbed, pre-calibrated, pre-tested
• Factory-mounted to midship fire pump
• Saves valuable compartment space
* High pressure 600 psi version available
OVERHEAD
Tank-to-Pump Valve
• 3-1/2 inch full flow
Monarch Intake Valve
• Chrome-plated bronze ball
• Manual, electric or pneumatic operation
• Spring-loaded floating seal assembly
• Stainless steel Wafer-Sphere element
• Polymeric flexible lip seal
Priming Systems
Impeller Shaft Assembly
• Fast, dependable priming
• ON - OFF valve
• Electrically driven
• Indicating lights
• Outboard ball bearing
• Operates independently from the pump
• Panel-mounted strainer
• Labyrinth-type reverse flow wear rings
• Lubrication option (requires
• Optional flame-plated impeller hubs
- Resists “bonding” to moving element
Discharge Relief Valve
• VPO oil-free primer
• Includes provision for pre-butterfly relief valve
CONTROL PANEL
• Pilot-operated for improved performance
priming-tank)
(Standard on CMU, CSU)
• Easy to set with pressure scale markings
• Vacuum activated priming valve
- Both reduce water bypass loss and
• Panel-mounted strainer
C20 Transmission
result in longer life
• Optional mechanical shaft seals
• High-strength aluminum construction
- No routine maintenance required
• Separable impeller shaft
- Reduces downtime for repairs
• “Silent” Morse HV drive chain
Pneumatic Shift
• Smoother transfer of power
• 16,000 lb./ft. torque rating
• Spring-loaded locking control prevents
accidental movement
• Dual-action cylinder stays in
position in case of air loss
C A F S y s t e m s™
CONTROL PANEL
OPTIONAL PROTECTION
Eclipse™ CAFSystems
• Easy-to-learn, pre-plumbed, pre-mounted, pre-calibrated
complete compressed air foam system
Overheat Protection Manager (OPM)
Zinc Anode
• Available on CS, CSU and CMU midship-mounted fire pumps
• Opens when water inside the pump reaches 140º F (60º C)
• Optional corrosion protection
• 200 SCFM rotary-screw air compressor encapsulated in oil sump
• Flashing warning light on pump panel is triggered when
• Fits any unused intake pad or pipe
water reaches 180º F (82º C)
• Water is released to ground
Intake Relief Valve
tap in the intake fittings
Zinc Intake Screen
• Replaceable corrosion protection
• Advantus® Foam System
saves valuable compartment space
• Powered off the main pump via a “hot-shift” pneumatic clutch
• Engage or disengage with pump running
• Toothed-belt drive requires no lubrication or maintenance
CONTROL PANEL
SINGLE-STAGE FIRE PUMPS
S101C20 - LEANER, LIGHTER.
NEVER WEAKER.
The smart addition of the new "Ram Horn" style intake allows for easier
OEM installation and drafting from either side of the truck. Despite the
added versatility, the overall footprint has been significantly
reduced, creating more compartment space
SINGLE-STAGE FIRE PUMPS
YOU DON'T STAY AHEAD BY
FALLING BACK ON OLD DESIGNS.
Waterous never stands pat on innovation. Our new
manufactured to deliver more power, performance,
line of fully re-engineered Endurance™ fire pumps is
usability and versatility. At Waterous, we believe
testament to that. It represents the next generation
it is our duty to push the limits. Endurance fire
in single stage pump thinking. Each model in
pumps do just that, without sacrificing reliability,
the Endurance line has been rethought and
longevity or ease of operation.
for additional equipment.
S101 FLOW SPECS: • 2000 GPM @ 150 psi
• 7570 l/min @ 10 bar
•
•
•
•
•
•
•
New “Ram Horn” style intake
Smaller footprint
Easier OEM installation
Dual-side drafting
New C20 transmission is 40 lbs. lighter than the C10 transmission
Uses just 9 quarts of oil (compared to 14 quarts in the C10)
Operates at a very cool 175 F, versus a more common 200 F
°
°
• New Allison Transmission MY09 software/wiring package creates a true neutral position
for improved pump shifting - Contact your OEM to assure you receive this feature.
• New shifting mechanism requires fewer parts
CSC20 - THE LIGHTER FIRE FIGHTER.
CXS - WE MADE IT BETTER.
THEN WE MADE IT SMALLER.
The fully manifolded Endurance CSC20 is 16% lighter than its predecessor. Additionally,
it features a smaller footprint to meet the ever-increasing demands for space on a fire
apparatus without sacrificing power, performance or utility.
With the introduction of a new “Ram Horn” style intake fitting, the CX can provide
CS FLOW SPECS: up to 1500 GPM at 150 PSI. Of course, that’s providing you use both inlets of the
• 1250 GPM @ 150 psi
“Ram Horn” fitting.
• 4750 l/min @ 10 bar
CXS FLOW SPECS: • 1500 GPM @ 150 psi
CSU FLOW SPECS: • 2250 GPM @ 150 psi
• 8550 l/min @ 10 bar
•
•
•
•
•
Lighter weight
Smaller footprint
New C20 transmission is 40 lbs. lighter than the C10 transmission
Uses just 9 quarts of oil (compared to 14 quarts in the C10)
Operates at a very cool 175 F, versus a more common 200 F
°
°
• New Allison Transmission MY09 software/wiring package creates a true neutral position
for improved pump shifting - Contact your OEM to assure you receive this feature.
• New shifting mechanism requires fewer parts
• 5700 l/min @ 10.3 bar
• New “Ram Horn” style intake
• CAFS-capable with a Waterous 150 CFM CAFSystem™
• New C20 transmission is 40 lbs. lighter than the C10 transmission
("K" transmission shown)
• Uses just 9 quarts of oil (compared to 14 quarts in the C10)
• Operates at a very cool 175 F, versus a more common 200 F
• New Allison Transmission MY09 software/wiring package creates
a true neutral position for improved pump shifting Contact your OEM to assure you receive this feature.
• New shifting mechanism requires fewer parts
°
°
MIDSHIP FIRE PUMPS
S100C20/S100 PUMP
Get the power and performance of a traditional midship fire pump in a compact,
MIDSHIP FIRE PUMPS
A PUMP FOR EVERY APPLICATION.
Waterous midship pumps provide fire industry
and exclusive design features, Waterous midship
professionals with easy-to-operate systems that
pumps have become the primary firefighting tools
offer the most efficient water delivery system
of fire departments around the globe.
lightweight design. Made of ductile iron, the S100C20 and S100D are nearly 35%
lighter, and yet 25% stronger than identical pumps made with gray iron. Available as
a direct-engine mount or matched with a Waterous C20 aluminum case transmission.
S100C10 FLOW SPECS: • Up to 2000 GPM @ 150 psi
• Up to 7600 l/min @ 10.3 bar
S100D FLOW SPECS:
• Up to 2000 GPM @ 150 psi
on the market. Admired for their craftsmanship
• Up to 7600 l/min @ 10.3 bar
•
•
•
•
•
•
•
•
•
CM/CMU PUMP
The low-profile midship two-stage series / parallel
pump with ball-type transfer valve allows you to
switch from pressure to volume smoothly and easily.
CM FLOW SPECS: • 500, 750, 1000 and 1250 GPM @ 150 psi
• 1900, 2850, 3800 and 4750 l/min @ 10.3 bar
CMU FLOW SPECS: • 1500, 1750, 2000 and 2250 GPM @ 150 psi
• 5700, 6625, 7750 and 8550 l/min @ 10.3 bar
• Flame-plated impellers (standard on CMU, optional on CM)
• Two-piece, horizontally-split, high-tensile strength
cast iron pump casing
• Optional bronze pump casing
• All deep-groove oil and grease lubricated ball
bearings located outside the pump casing
• Bronze double-hubbed accurately balanced impellers
• Stainless steel separable impeller shaft
• Replaceable bronze impeller rings
• Flinger rings mounted on impeller shaft
• Adjustable BFG packing standard
(spring-loaded mechanical seal available)
Cast ductile iron body
Dual stripping edge volute
Passive lubrication system
Self-adjusting mechanical seal
Replaceable bronze wear rings
Mechanically and hydraulically balanced impeller
All deep-groove anti-friction ball bearings, oil-splash lubricated
5-inch ANSI flange or optional end-flanged discharge manifold
5-year warranty
CGVGPA PUMP
A simple-to-operate, efficient-to-run and easy-todepend on single-stage pump that’s perfect for
applications that require a little less power.
CGVGPA FLOW SPECS: • 750 GPM @ 150 psi for NFPA 1901
• 2850 l/min @ 10.3 bar
CX PUMP
• 500, 600 and 700 GPM for NFPA 1902
• 1900, 2250 and 2650 l/min
Versatile and adaptable, the CX can be mounted midship or in front of the
engine if needed. The CX can even be used as a PTO pump or direct-engine
mounted. It’s an ideal solution for specialty applications or tight spaces.
CX FLOW SPECS: • 750 to 1250 GPM @ 150 psi
• 2850 to 4750 l/min @ 10.3 bar
• Pressures to 350 psi (24.1 bar)
• End-suction/vertically-split volute
• Self-adjusting mechanical seal
S100C20
• Mechanically and hydraulically
balanced impeller
• Replaceable bronze impeller rings
• Optional flame-plated impeller
•
•
•
•
•
•
•
•
•
All deep-groove, oil-and-grease-lubricated ball bearings located outside the pump casing
Bronze double-hubbed accurately balanced impeller
Stainless steel shaft
Replaceable bronze wear rings
Bronze-fitted, high-tensile strength cast iron pump casing
Optional bronze pump casing
Self-adjusting mechanical seal
Flinger rings mounted on impeller shaft
5-year warranty
S100D
PTO FIRE PUMPS
CPK4 PUMP
FLOW SPECS:
PTO FIRE PUMPS
PUMPING ON THE GO.
Provide true "pump and roll" capability while
Available in multiple sizes and styles, Waterous
reducing transmission wear on your apparatus by
has a PTO fire pump to fit your requirements and
adding a PTO fire pump to your firefighting arsenal.
apparatus set-up perfectly.
An ultra high-pressure, lightweight,
4-stage centrifugal pump. Able to produce
high-pressure fog while the pumper is in
motion or stationary.
• 75 GPM (285 l/min) at 1250 PSI (86 bar)
• Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings
(bronze optional)
• Ni-resist; special “stepped” designed wear rings reduce internal leakage
and increase efficiency
• Bronze, hydraulically and mechanically balanced impellers
• Impeller hubs are “stepped” to minimize internal bypass
• Adjustable braided flexible graphite (BFG) packing
• Available with either clockwise or counter-clockwise rotation of input shaft
CGVK PUMP
FLOW SPECS:
• 500 GPM (1900 l/min) to 750 GPM (2850 l/min) @ 150 PSI (10 bar)
• Special rating of 1000 GPM (3800 l/min) or 350 PSI (24 bar)
CPK2 PUMP
FLOW SPECS:
• 300 GPM (1135 l/min) @ 150 psi (10 bar) Maximum Flow
• 60 GPM (227 l/min) @ 400 psi (28 bar) Maximum Pressure
Driven by a transmission-sidemounted PTO, the CPK2 can
also be powered by optional
direct-engine mount. Able to
accommodate multiple lines
for straight stream or fog
nozzles.
•
•
•
•
•
•
•
Optional bronze pump casing
Multiple gearbox mounts (horizontally, vertically, or inverted)
Ten optional speed-increasing transmission ratios
Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears
17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)
Bronze double-hubbed precision-balanced impeller
3-inch NPT or BSP intake; 2-inch NPT or BSP discharge
The single-stage design
with vertically-split volute and pump
transmission provides simple operation,
easy maintanence and high reserve capacity.
FLOW SPECS:
• 5-year warranty
FLOW SPECS:
•
•
•
•
•
•
A compact two-stage pump
with “pump and roll” capability
making it ideal for extinguishing
grass and brush fires.
High tensile, one-piece, close-grained gray iron casing (bronze optional)
Bronze double-hubbed, precision-balanced impellers.
Separable impeller shaft for ease of serviceability.
Push/pull manual bronze transfer valve (in bronze housing)
Available in either rotation of input shaft
4-inch NPT tee adapter intake; two 2 inch or 2.5 inch NPT tee adapter
(or 2.5 inch tapped flange) discharge
• PTO or direct-engine, bell-housing mount
• Ten optional speed-increasing transmission ratios
• 5-year warranty
• 750 GPM (2850 l/min) to 1250 GPM (4750 l/min)
• 150 PSI (10 bar)
CPK3 PUMP
• 60 GPM (227 l/min) @ 800 psi (55 bar) Maximum Pressure
High-tensile, close-grained gray iron (bronze optional) transmission casing
Constant mesh, helical gears made of alloy steel
17-4 stainless steel, heat-treated impeller shaft
Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs
Victaulic®, threaded or flanged intake connections
Face-type, self-adjusting corrosion- and wear-resistant mechanical seals.
5-year warranty
CXK PUMP
(BSP threads available straight or tapered)
• 500 GPM (1900 l/min) @ 150 PSI (10 bar) Maximum Flow
•
•
•
•
•
•
•
A single-stage end-suction pump for ARFF
trucks and fire boats. Midship mounted
and driven by a PTO drive, the CXK can
also be front-mounted or direct-driven.
• High-tensile, close-grained iron (bronze optional), two-piece,
vertically-split volute body
• Constant mesh, helical gears made of alloy steel
• 17-4 stainless steel, heat-treated impeller shaft
• Fully-enclosed, bronze, double-hubbed, precision-balanced impeller
• Bronze replaceable wear rings
• Face-type, self-adjusting corrosion- and wear-resistant mechanical seals.
• 5-year warranty
CLK PUMP
FLOW SPECS:
• 500 GPM (1900 l/min) @ 150 PSI (10 bar)
• 350 PSI (24) bar Maximum Pressure
One-piece design featuring intake and
discharge arrangements in a wide variety
of options to meet your requirements.
• High-tensile, one-piece, gray iron casing
• Multiple transmission mounting options (front-housing, bell-housing-direct or PTO)
• Choice of 4-inch NH or BSP threaded-end intake
• Bronze, double-hubbed, precision-balanced impeller
• 17-4 stainless steel, heat-treated impeller shaft
• Maintenance-free, self-adjusting shaft seal
• Hardened, helical cut, constant-mesh gears
• 5-year warranty
ARFF FIRE PUMPS
FIREFIGHTING SYSTEMS
YOU CAN COUNT ON.
HL SERIES FIRE PUMPS
EFFECTIVE FIRE SUPPRESSION
IN ANY LANGUAGE.
Whether fighting fires on the open sea or battling
quality materials using the latest technology—
blazes on the runway, you demand pumps that
so you never have to worry about performance
exceed performance standards. To meet these
or reliability. Tough and rugged, Waterous ARFF
Specifically designed for international-style fire
and feature built-in high-pressure relief valves for
demands, our fireboat and aircraft rescue and
pumps deliver the type of knockdown power you
vehicles, the compact, rear-mounted HL series
enhanced safety. Both the HL200 and HL300 models
firefighting (ARFF) pumps are built with the highest
need, when you need it most.
pumps deliver high and low pressure simultaneously,
are backed by an industry-exclusive 5-year warranty.
CH-4 PUMP
HL200 PUMP
CH-4 FLOW SPECS:
HL200 FLOW SPECS:
• 1400 GPM (5300 L/min.) @ 250 PSI (17 bar)
• Bronze (cast iron optional),
horizontally-split volute body
• 17-4 stainless steel impeller shaft
• Oil- or grease-lubricated ball bearings
• Fully-enclosed, bronze, double-hubbed
precision-balanced impeller
• Bronze replaceable wear rings
• 5-year warranty
CR PUMP
• Low Pressure Spec: 2000 l/min @10 bar (3-meter lift)
•
•
•
•
•
•
• High Pressure Spec: 400 l/min @ 40 bar
Available in mid-mount configuration
Optional round-the-pump foam system
Optional operator’s panel
Optional Storz fittings
Bronze (gunmetal) construction available
5-year warranty
CR FLOW SPECS:
• 2050 GPM (7800 L/min.) @ 250 PSI (17 bar)
• Gray iron (bronze optional),
vertically-split volute body
• 17-4 stainless steel impeller shaft
• Oil-splash lubricated ball bearings
• Fully-enclosed, bronze, double-hubbed
precision-balanced impeller
• Bronze replaceable wear rings
• 5-year warranty
HL300 PUMP
HL300 FLOW SPECS:
CZ PUMP
• Low Pressure Spec: 3000 l/min @10 bar (3-meter lift)
CZ FLOW SPECS:
• 950 GPM (3600 L/min.) @ 260 PSI (18 bar)
CZU FLOW SPECS:
• 1500 GPM (5700 L/min.) @ 250 PSI (17 bar)
• High-tensile gray iron (bronze optional),
vertically-split casing
• 17-4 stainless steel impeller shaft
• Oil-splash lubricated ball bearings
• Fully-enclosed, bronze, double-hubbed
precision-balanced impeller
• Bronze replaceable wear rings
• 5-year warranty
•
•
•
•
•
• High Pressure Spec: 400 l/min @ 40 bar
Available in mid-mount configuration
Optional round-the-pump foam system
Optional operator’s panel
Optional Storz fittings
Bronze (gunmetal) construction available
• 5-year warranty
WATEROUS FIRE PUMP ACCESSORIES
WATEROUS FOAM SYSTEMS
GETTING THE MOST OUT OF
YOUR MIDSHIP FIRE PUMP.
Waterous vehicle-mounted fire pumps give
you the power you need. Now equip them to fit
DISCHARGE VALVES
•
•
•
•
Chromium-plated bronze valve ball
Spring-loaded floating seal assembly
Multi-purpose drainport
Manual, push/pull, twist lock (2.5”) mechanism
with panel-mounted “T” handle lock
• Optional electric actuator complies
with NFPA requirements for slow actuation
DISCHARGE RELIEF VALVE
OVERHEAT
PROTECTION MANAGER
MONARCH™
INTAKE VALVE
• Opens when water inside the pump reaches 140º F (60º C)
• Flashing warning light on pump panel is
triggered when water reaches 180º F (82º C)
• Water is released to ground
•
•
•
•
• Controls discharge pressure by bypassing flow from
discharge back to suction
• Control discharge pressure up to 300 psi (20 bar)
• Available in three sizes, up to 2250 GPM (8500 l/min)
your specific operation by selecting the perfect
accompanying accessories.
ADVANTUS ® FOAM SYSTEM
•
•
•
•
•
•
•
•
Complete aspirated foam system
4-sensor technology
2-year warranty and fully-integrated service
Stainless steel foam manifold
Full-flow brass body check valve
16-bit mixed signal microcontroller
Onsite and online laptop diagnostics
Available 3 GPM (11.3 l/min) or 6 GPM (22.6 l/min)
@ 150 PSI (10 bar) foam output
• Maximum operating pressure: 450 PSI (32 bar)
Manual, electric or pneumatic operation
Stainless steel Wafer-Sphere® element
Polymeric flexible lip seal
Provision for pre-butterfly relief valve
PRIMING PUMPS
•
•
•
•
•
VPO oil-free primer
Fast, dependable priming
Electrically driven
Operates independently from the pump
Lubrication option (requires priming tank)
INTAKE RELIEF VALVE
• Pilot-operated for improved performance
• Pressure scale markings
• Panel-mounted strainer
AQUIS™ FOAM PROPORTIONER
•
•
•
•
•
Complete aspirated foam system
1-year warranty and service
Stainless steel paddlewheel flow meter
16-bit mixed signal microcontroller
Blue LED illuminated operator panel (standard on
2.5 models)
• Onsite and online laptop diagnostics
• Available 1.5 GPM (5.68 l/min) or 2.5 GPM
(9.46 l/min) @ 150 psi (10 bar) foam output
• Maximum operating pressure: 450 PSI (32 bar)
PRIMING VALVES
•
•
•
•
Vacuum Activated Priming (VAP) Valve
Stainless steel valve stem
Opens automatically during pump priming
Closes automatically when primer is deactivated
PNEUMATIC SHIFT
• Spring-loaded locking control
• Dual-action cylinder
ENDURANCE ™ I
Waterous has you covered with Total
Integration – a comprehensive program
that ensures fire departments have
everything needed from specification
to implementation. Total Integration
guarantees the right equipment, proper
installation, thorough education and
lifetime support with zero exceptions.
1 - EVALUATE
4 - ORIENTATE
Waterous assesses existing equipment,
short and long term needs, fire scenarios
and other factors to create an accurate, up
to date evaluation of the situation.
Waterous provides thorough equipment
orientation ensuring fire departments
get the best performance with the safest
operation. Waterous also offers the only
CAFS instructors in the industry.
2 - PROPOSE
Waterous studies the data and objectives
to create a fire suppression equipment
specification program that meets the
needs and respects the budget.
3 - IMPLEMENT
Waterous takes proactive measures to
provide the best possible circumstances
for
proper
equipment
installation/
retrofitting for optimum performance and
longevity.
5 - SUPPORT
Waterous backs its equipment with industry
leading warranties, including 5- year
coverage for pumps, 2- year coverage for
Advantus®, 1-year coverage for Aquis™,
lifetime call support on all products, and,
in addition, Waterous offers the Total
Protection Package (TTP-5) that increases
the coverage to include labor expenses to
dismantle, remove and reinstall covered
products or parts.
Corporate Headquarters
125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456
651- 450-5000
www.waterousco.com
F-2606 (10/09)
Contents in this brochure are subject to change without notice.
MIDSHIP
I
PTO
I
ARFF
I
HL SERIES
I
ACCESSORIES