over Tyre Tracks (oTT) Skid Steer loaders - DM

over Tyre Tracks (oTT)
Skid Steer loaders
Over Tyre Tracks for Skid Steer Loaders
InTrOducTIOn
New addition to the Bobcat parts business, the
rubber over tyre tracks kit will give a skid steer
loader the characteristics and performances of a
track loader.
For the customers who occasionally need the main
advantages of a CTL but do not want to invest in a
new machine, here is a quick, easy and economical
solution. It allows to convert a skid steer into a track
loader in a few minutes and vice-versa. Customer will
enjoy low ground disturbance, more pushing force
or better flotation when needed.
This can also be a great opportunity to lead the
customer to the purchase of a real CTL in the near
future.
Convert a skid steer into a compact
tracked loader in 15 minutes*!
*ESTIMATED INSTALLATION TIME: 15 MIN (Approximate time only; actual time may vary.)
Please refer to the Installation Instructions (6989730) on BOP for more details.
FeaTureS and beneFITS
• Installation and dismounting takes a few minutes. Can be installed on site.
• Light weight
• Improved machine flotation
• Reduced soil disturbance
• Increased traction, stability and efficiency
• Easy storage: only 2 different kits to cover the medium and large range SSL
2
Over Tyre Tracks for Skid Steer Loaders
n Kits include
• ½, ¾ & full links
• Installation and User Manual
• Spare pins & nuts
• Pilot pin
• Tensioning ratchet
• 2 tracks per set of OTT’s
Note: the kit does not include the required wheel spacers
(7112306).
Link ½ section
Link ¾ section
Link full section
n Excellent compatibility matrix
Thanks to the links system, only 2 different kits
cover most of the Bobcat medium and large
range.
3
Over Tyre Tracks for Skid Steer Loaders
QuIck and eaSy InSTaLLaTIOn
KIT NUMBER
7193483
ModEl
SERIAl NUMBER
S150
A8M011001 & Above
S160
530011001 & Above
S175
A8M411001 & Above
S185
530411001 & Above
S205
A3LK11001 & Above
763
512211001 & Above
512411001 & Above
512611001 & Above
773
500K11001 & Above
509611001 & Above
518011001 & Above
519111001 & Above
873
All
S220
A5GL11001 & Above
S250
A5GN11001 & Above
S300
A5GR11001 & Above
7193484
4
Over Tyre Tracks for Skid Steer Loaders
TIPS
n Safe operation of over tyre tracks
• Tracks should not be used below -30°C or above 50°C.
• Bobcat does not recommend the use of over tyre tracks on snow or ice as machine traction will be adversely
affected. Machine steering, stability and braking accuracy will be affected.
• It is recommended not to use tracks on wet sand because it will build up between the tracks and the tyres,
putting higher loads on the drive train components and track assembly.
• Large foreign objects could block the track assembly, damaging it and/or drive train components. Therefore
the use of tracks in scrap applications is the responsibility of the operator.
• Slopes steeper than 25% should be avoided at all times, as they could compromise machine stability and lead
to detracking.
• Tracks that are tensioned too highly will result in unnecessary loads on the tracks, wheel studs, axles and
engine
n Track lifetime can be extended
• By avoiding driving over curbs and sharp objects.
• By swapping the tracks every 100 hours. Tracks will develop higher wear on the inside (the side towards the
machine frame); regular swapping will increase track lifetime by 10 to 20%.
n Storage
Tracks should be stored in a dry and covered area, away from UV- and sunlight. Preferably they are stored in the
original pallets, flat on the side. Track ends should be sprayed with a zinc coating to prevent corrosion during
storage.
Tracks indicative average lifetime
Concrete & Asphalt
General Construction
Landscaping
Farming
500-750 H
750-1000 H
1000 H
1250 H
5
Over Tyre Tracks for Skid Steer Loaders
POLyureThane OTT
(SOLd aS aTTachmenT)
n Features and benefits
• Improved traction and flotation in soft, muddy and
loose conditions
• Induction-hardened crossbars and traction bars
• Open bar design using the tyre for maximum
traction and flotation
• Open side plate for excellent cleaning in the pivot
area
• Tyre protection
The polyurethane tracks for Bobcat skid steer
loaders offer more traction in soft, muddy and loose
conditions, a smoother ride and reduced ground
pressure.
PICTURE NUMBER
P/N
dESCRIPTIoN
FITS TYRES
1
6683317
PLATE M160
5.7-12
6
2
6683318
PLATE M180
8.5-12
3
6683319
PLATE M200
8.5-15
4
6683320
PLATE M280
10-16.5
5
6683321
PLATE M300
12-16.5
6
6683322
HALF PLATE M160
5.7-12
1
6
6683323
HALF PLATE M180
8.5-12
6683324
HALF PLATE 14200
8.5-15
6
6683325
HALF PLATE 14280
10-16.5
10
6
6683326
HALF PLATE 14300
12-16.5
11
7
6683327
SIDE LINK M160
8.5-15, 10-16.5, 12-16.5
7
6683328
SIDE LINK M140
5.7-12, 8.5-12
8
6683329
SIDE LINK M110
all
6683330
ADJUST LINK M60
all
10
6683331
NUT M12
all
11
6683332
BOLT M12x40
all
4
3
5
6
6
9
2
9
8
7
Over Tyre Tracks for Skid Steer Loaders
STeeL OTT
(SOLd aS aTTachmenT)
n Features and benefits
• Installation in less than 30 minutes and removal in
10 minutes
• Dual-induction hardened pads and traction bars for
exceptional traction and durability
• Heat-treated, replaceable and reversible bushings
and links for increased reliability and service life
• Smooth contours to prevent from cutting or
damaging the tyres
Choose from two brands of Bobcat-approved, selfcleaning, longer-lasting steel tracks. Tracks float over
soft, sandy, rocky or muddy ground and provide
better traction on slippery surfaces.
7
Over Tyre Tracks for Skid Steer Loaders
8