Martin Industries, LLC. • 800.366.5817

Transcription

Martin Industries, LLC.
206 Elk Fork Road
Elkton, KY 42220
Phone 800-366-5817
Fax 270-265-9896
Clean and lightly till the seed
zone, without furrowing out.
Place fertilizer cleanly in the
furrow, not in residue.
Close the seed slot completely
across a wide range of
conditions, without
compacting the soil.
Allow seedseed-slot sidewalls to flex
upwards, to help closing the slot
and reduce sidewall compaction.
Level the row and seal air
pockets to allow uniform
emergence.
Consider this.
Each year, more and more farmers turn to the Martin-Till system to help widen their
planting window. Being able to return to the field a day or two sooner after each rain
allows more acres to be planted on time. Having the option of reducing or
eliminating tillage lets them focus on planting, which creates opportunities for
expansion without the need for additional costly equipment.
Increased nitrate levels within streams and rivers will soon bring tighter regulations
with regards to quantity and timing of nitrogen applications. This brings both
challenges and opportunities, because research clearly illustrates that banding
fertilizer close to the seed row can increase early plant health (especially in no-till
conditions) plus boost the overall recovery % of fertilizer applications. Our UMO-100
fertilizer opener mounts to the face plate of the planter unit and cleanly positions
fertilizer consistently alongside the row. The UMO-100 can also be installed within
our new 1360 floating row cleaners to achieve the benefits of residue clearing and
fertilizer placement at the same time.
Martin Industries remains committed to the task of discovering and developing more
ways to help our customers achieve better stands, yields and profits.
Howard Martin
Founder, Martin Industries
Contents
Page
Martin WA 1360 Floating Row Cleaners
6-9
Martin Fixed Row Cleaners
10-13
Martin UMO-100 Fertilizer Openers
14-15
Martin Reduced Inner Diameter Gauge Wheel Tires
16-17
Martin Closing Wheel Systems
18-25
Martin Twisted Drag Chains
26-27
Martin John Deere Grain Drill and Air-Seeder
Closing Systems
28-29
Martin Spring Spacers For John Deere Drill and
Air-Seeders
30
Warranty Information
31
®
The 5 Step Martin-Till® Planting System
Step 1.
Clean and lightly till the seed
zone without furrowing out.
Use Martin Row Cleaners to remove
excess residue and clods from the
row without furrowing.
Pages 6 - 13
Step 2.
Place fertilizer in soil, not on trash or
planter.
Use our Martin Unit-Mounted Fertilizer
Openers to cleanly position liquid or dry
fertilizer precisely in a band beside the row.
Pages 14 - 15
Step 3.
Let the seed discs lift part of the
sidewall.
Use our Reduced Inner Diameter
Gauge Tires to open the seed trench
with a minimum amount of sidewall
compaction.
Pages 16 - 17
4
Step 4.
Close the slot without compacting the soil surface and slowing emergence.
Select the best Martin closing system for your soils and moisture level.
20 point dimples, single 15” and a pair of 13” spiked closing wheels are all available
to install on most planters to close and/or fracture the sidewalls.
Pages 18 - 25
Step 5.
Level the row and seal air
pockets.
Finally, use our Twisted Drag
Chain to drag a hand-full of soil.
This technique helps level and
lightly firm the row to promote
more consistent emergence.
Pages 26 - 27
Martin Industries, LLC. • 800.366.5817 5
WA 1360 Floating Row Cleaner Features:







Heavy Duty frame
3/8" thick, heat treated T-1 right and left toothed
wheels with diamond shaped points
Stationary triple-lip seals
Heavy-gauge dust caps
Double tapered bearings
Greaseable hubs
Available for most planter models
WA 1360 Floating Row Cleaners
Floating row cleaners allow residue to
be consistently cleared from the seed
zone across a wide range of different
soil types, residue levels and
topographies. The Image to the left
illustrates a WA 1360 floating row
cleaner helping to no-till corn into
wheat stubble in Kentucky.
The image to the left illustrates a set
of WA 1360 floating row cleaners
mounted on a John Deere 1770 in
Kansas, no-tilling corn into soybean
residue. Floating row cleaners excel in
fields with topographic variations, different soil types or areas with wide
ranging residue levels.
The image to the left illustrates a WA
1360 floating row cleaner mounted on
a White 8000 series planter no-tilling
corn into grain sorghum residue. A
set of internal deflectors (scrapers)
are strongly encouraged for damp
residue conditions.
6
WA 1360 floating row cleaners are designed
to follow the contours of the soil surface,
consistently moving residue clear of the
path of the gauge wheels. This allows the
gauge wheels to run in the cleared zone to
promote uniform depth control and facilitate
quicker soil warming and rapid emergence.
The image to the left shows a Kentucky
grower no-tilling corn back into previous 200
bu/ac corn residue. When no-tilling into Bt
cornstalks (especially within high yielding
and/or irrigated environments) we strongly
suggest adding at least one pair of wheel
weights (see below).
WA 1360 Floating Row Cleaners - Options
STW-04
Side Treader Wheels.
Clearing Residue
Aluminum Side Treader wheels are purchased on over 95% of
WA 1360 floating row cleaners and are designed to prevent the
row cleaner wheels trenching within soft soils. They also provide
traction to help keep the row cleaners turning in heavy residue.
CA
Cam Adjust.
Cam adjusters are available for all WA 1360 row cleaners and
they speed up the process of changing the working depth of the
row cleaner frames. They are especially beneficial for growers
who frequently switch from no-till to conventional soils.
WW-04
Wheel Weights (sold as a pair)
Wheel weights are strongly recommended when no-tilling into
heavy residue (such as heavy corn or wheat residue). Each pair
adds 10lb of weight per row. Two pairs can be added per row
for extremely heavy residue such as heavy Bt cornstalks.
7
John Deere Mounts
BDC 1360*
This mount attaches to John Deere
7200 (and later) series planters with a
John Deere unit mounted no-till
coulter. It will also install behind the
John Deere single disc fertilizer opener
(with extended parallel arms) and the
Moeller Fertilizer Knife. Measures 21”
from planter face plate to front of row
cleaner wheels.
BD 1360*
This mount attaches to John Deere
7200 (and later) series planters
without No-till coulters. Measures 19”
cleaner wheels.
* If equipping the rear units of a John Deere 1790 with 1360 row
cleaners, long parallel arms all the way across the rear units are
strongly encouraged, especially when operating in heavy residue.
Kinze Mounts
BKC 1360**
This mount attaches to Kinze 2000
and 3000 series planters with a unit
mounted no-till coulter. Measures 21”
cleaner wheels.
BK 1360
This mount attaches to Kinze 2000
and 3000 series planters without a
unit mounted no-till coulter. Measures
19” from planter face plate to front of
row cleaner wheels.
** If installing WA 1360 row cleaners on Kinze Twinline planters
with no-till coulters, unit set back kits will be required behind the
transport wheels on the rear units. Unit set-back kits (USB-70)
are available from Martin Industries (see box to the right).
8
BCIH 1360*** This mount attaches to Case IH
planters without frame mounted no-till
coulters. Measures 22” forward from
the mounting frog.
*** Please note the BCIH 1360 will not fit on Case planters that
have the hexagonal drive shaft under the parallel arms (There is
not enough upward clearance above the BCIH 1360 and below
the parallel arms to allow the frame to float sufficiently).
White Mounts
BW 1360**** This mount attaches to White 6000
and 8000 series planters without a
no-till coulter. Measures 19” from
planter face plate to front of the row
cleaner wheels.
Case IH Mounts
**** If installing BW 1360 row cleaners on White planters,
make sure there is enough clearance between the top of the BW
1360 frame and the bottom of the planter drive shaft. Some
planters may have interference problems when the row cleaners
raise up on undulating ground.
Unit Set Back Kits
USB 70
Unit set back kit for John Deere 7000 series
and Kinze planters. This kit moves the unit
back 6” to allow more clearance when
installing floating row cleaners around
certain no-till coulter configurations.
USB 72
Unit set back kit for John Deere 7200 series
through to John Deere 1700 series planters.
Moves the unit back 6” to allow more
clearance when placing floating row cleaners
around no-till coulter configurations.
Martin C-125 and Fixed Row Cleaners
Martin C-125
We still offer the proven C-125. The C-125 is a
floating row cleaner with 2 x 13” row cleaner
wheels, heavy duty hubs, double tapered
bearings and optional aluminum side treader
wheels.
C-125 was superseded by the WA 1360 but this
model can install on planter types not previously
included within this product guide. If in doubt,
please call us to help you configure the best row
cleaner configuration for your planting system.
WA 1532
The Martin original style row cleaner clears the
widest path of any tooth wheel row cleaner on
the market.
The 15" diameter, 3/8” thick T-1 heat treated
wheels are made left and right in order to shed
the residue better. The axles are located to the
rear of the adjustable stem in order to insure a
simultaneous stretching and cutting of the
residue.
WA 1532 Features






10
Martin WA 1532 Fixed Row Cleaners
Rigidly mounted directly to
planter unit face plate
Easily adjustable in 1/4"
increments with lift assist
handle and spring
Patent #5,507,351
Heavy duty cast 4-bolt hub
Double tapered bearings
Triple lip seals
The teeth on the cleaning wheels actually reach
past the edge of the planter gauge wheel rubber.
This guarantees a clear path for planter operation
even at reduced speeds. The space between the
teeth is wider than any competitor’s to enable soil
to remain in place as residue is raked aside. The
teeth intersect in order to reach the entire row
middle and to aid in cleaning one another.
GWS-01
Optional Gauge Wheel Shield
Attaches to the side of the gauge wheel to
smooth out the flow of residue between unit
and transport wheels. Two required per row.
Martin WA1332 and WA1334 Row Cleaners
• Rigidly mounted directly to planter unit face plate
• Easily adjustable in 1/4" increments with lift assist
handle and spring
• Movable axles with the Martin Exclusive D-Lock
System allow for several mounting positions
(intersect, offset, retracted)
• 13" diameter toothed steel wheels with diamond
shaped points allow plenty of upward adjustment in
loosely worked soils
WA 1332 Row Cleaner comes complete with 1 1/2”
stem wheel assembly. (For use with all pin adjust
brackets which accept 1 1/2” stems).
WA 1334
Martin Fixed Row Cleaners
WA 1332
WA 1334 Row Cleaner are specifically desiogned for
IH Early-Riser planters which require extra tilt. (for
use with all pin adjust brackets which accept 2”
stems).
Martin WA 1320N Row Cleaners
WA 1320N
The Martin Narrow Row Cleaner Model WA1320N is
designed to clean residue from the vital seed trench
area with less total disturbance than regular models.
Two wheels are used to insure that residue is
removed from the row center and not just dragged
across the row which may occur with single wheel
models.
This model is recommended for 20" planters that
have all units on one bar operating in moderate
residue. Because the cleaning teeth reach their
maximum depth nearer the row than other models,
the seed trench is more easily opened and the trench
walls are more likely to crumble. The planter path will
retain more moisture where this model is used than
where the regular width cleaners are operated.
11
Martin Fixed Row Cleaners And Brackets
12
Martin B413 Row Cleaner
For use only on White Frame Mounted
Double Arm Coulter.
• 3/8" thick, right and left 13" diameter
toothed steel wheels with diamond
shaped points
• Side treader wheels are standard on this
model to create a larger gripping surface
for the toothed wheels
• Mounting bracket included
Pin Adjust Brackets For Fixed Row Cleaners
MT385
Attaches to Deutz-Allis (now Landoll) Quadra Disk
planting unit. Accepts 1 1/2” tube wheel assembly.
MT512
Attaches to White 5000 Series planters. Bolts
directly to planter using existing holes. Accepts
1 1/2” wheel assembly.
MT610
Attaches to White 6000 Series planters with heavy
duty down pressure springs. Accepts 1 1/2” wheel
assembly.
MT810
Attaches to White 8000 Series planters.
Accepts 1 1/2” wheel assembly.
Attaches to Case IH 800 and 900 series planters.
For 2” tube wheel assemblies (Additional mounting
kit required for early 800 series planters).
MT1250
Attaches to Case IH 1200 and 1250 series planters
For 2” tube wheel assemblies. Will not work with
pneumatic down force systems.
Martin Fixed Row Cleaner Brackets
MT892
MT772 - Rear Position
Uses two position bolt-in receiver tube to fit all
MaxEmerge, Kinze, and White 6000 series
planters. Shown in rear position as used on JD
MaxEmerge, early Kinze. Also, some JD Early
MaxEmerge 2 series (7200, 7240, 7300).
Accepts 1 1/2” tube wheel assembly.
MT772 - Forward Position
Shown with receiver tube in forward position
as used on late MaxEmerge 2 series to
MaxEmerge Plus, late Kinze, early White 6000
series (except with heavy down pressure
springs). Accepts 1 1/2” tube wheel assembly.
13
Martin Unit Mounted Fertilizer Openers
Many no-till producers are placing
1/3 to 1/2 of their nitrogen down
in a band alongside the row at
planting time. Research shows
banded placement of the nutrient
allows for increased uptake, more
consistent early growth and an
increased rate of total nitrogen
recovery (compared to broadcast
nitrogen applications).
The Martin UMO-100 fertilizer opener mounts
directly to the planting unit and is compact
enough to be mounted within our 1360 floating
row cleaners.
Because the opener mounts directly to the
planter unit, the fertilizer is always precisely the
same distance from the seed, even when
planting on the contour. The lateral spacing
from the seed can be 1", 2", or 3", and there
are also three vertical settings that allow
fertilizer to be placed 3/4" above, even with, or
3/4" below seed depth. We like the way it
consistently places the fertilizer in the ground
without splattering it on the planter.
UMO-100 Features
Sturdy compact design
 Double tapered bearing hub
 5mm thick (0.197") blade
 Adjustable furrow control device
 Can be set to place liquids 1", 2", or 3" from
seed row
 Can also be set to place liquids 3/4" above,
Even with, or 3/4" below seed depth
 Fits Deere 7000 - 1700 series planters, Kinze
and White 6000 & 8000 series planters
• Patent Number 7,481,171

Image above shows the UMO-100
placing fertilizer in a band alongside
the row for maximum uptake.
14
1360 floating row cleaner with UMO-100
combination. Designed to install on 7200 (and
later) John Deere planter units. Measures 25” from
face plate to front of row cleaner assembly.
BK-UMO
combination. Designed to install on 2000 and 3000
series Kinze planter units and John Deere 7000
series planters. Measures 25” from face plate to
front of row cleaner assembly.
Martin Unit Mounted Fertilizer Openers
BD-UMO
BCIH-UMO*
combination. Designed to install on Case IH
planter units without frame mounted no-till
coulters.
* Requires heavy duty lower parallel arms.
BW-UMO
combination. Designed to install on White 6000 and
8000 series planter units without frame mounted no
-till coulters. Measures 25” from face plate to front
of row cleaner assembly
Left side shows where the
standard gauge wheel tire
was used. Notice the
compacted soil and sidewall.
Right side shows how the
RID-01 tire allows the
sidewall to flex upwards
and fracture, reducing
sidewall compaction and
helping with row closure.
16
A second and perhaps more significant benefit of the reduced
inner diameter gauge wheel tires is their ability to leave the
soil either side of the row looser and this helps improve the
closing action of both factory and Martin-Till closing systems.
RID - 01 Tire
RID-01 are not for use on John Deere XP series row units.
Reduced Inner Diameter Gauge Wheel Tires are an important
addition to a no-till planting system, especially if the soils are
wet at planting time. The benefits of reduced inner diameter
gauge wheel tires can be seen in the images to the left
where both a standard gauge wheel tire and a reduced inner
diameter tire are both installed on the same row unit. Notice
how the standard tire (left) compressed the sidewall,
increasing the risk of sidewall compaction and reduced yields.
The reduced inner diameter gauge wheel tire (right) allows
the sidewall to flex upwards, reducing soil compression within
the seed zone.
Many different reduced inner diameter gauge wheel tires are available on the
market, however, our research has concluded that the most effective tire is one
which includes a softer, more flexible compound. Softer compounds enable tires
to better shed wet soil plus offer greater terrain following ability by absorbing
more shock through the softer tire. Our tire is the one illustrated at the top of the
two tires (with a weight of 7.4lb). Other tires on the market have a harder and
less flexible compound and they can be identified by their increased weight.
17
Martin Closing Systems
Martin Paired 13” Spading Closing Wheels
Martin Spading Closing wheels move soil toward the seed at planting depth, while
lifting and fracturing the surface layer to achieve compaction free closing of the
seed trench in wet, hard, or sod conditions. With soil firmed around the seed
from each side and the surface layer loosened, crops emerge sooner and planting
can be done at the proper depth, even in wetter conditions, without fear of
crushed soil above the seed preventing emergence.
Our Spading-Closing Wheels do not attempt to close the seed trench by a
crushing action from the top down. The soil is wedged toward the seed from
either side at seeding depth by a pair of Martin Row Cleaner wheels. The ends of
the teeth have full bevels cut on them. The beveled sides of the teeth on each
wheel are placed toward the row and the narrow edge enters the soil first
producing a wedging action. As the teeth on the wheels rotate up out of the soil,
a slight lifting and crumbling occurs in the surface layer. The area on either side
of the seed and immediately above it is not fractured, and because of the shape
and spacing of the teeth on these wheels, wet soil does not bind to them.
18






Speeds up warming of the row area
Closing wheel arm pressure can be greatly reduced
Seed trench is closed in the most severe conditions
Seed depth does not have to be raised to insure emergence
Soil above the seed is loose and slightly mounded allowing quicker emergence
in a compaction-free environment
Sidewall compaction is greatly reduced
In the past we thought the only way to grow no-till crops successfully was to
wait until the soil was dry enough for the planter’s smooth closing wheels to
crumble the soil over the seed. Our long-standing struggle with the problem
prompted us to find a solution that we have since patented.
Martin Closing Systems
Spading Wheels - Specific Advantages
Customers around the country are praising it.
SCW1341 Spading Closing
Wheels
For planters with roll-pin attached
hubs: Deere 7000 & 7100 series,
early Kinze series planters




3/8" thick, 13" diameter right and
left toothed steel wheels with
diamond shaped points
Cast hubs
Adaptor axles
Two 17mm I.D. bearings
SCW 1344 Spading Closing
Wheels pictured on a John
Deere 1700 series closing wheel
Wheels
For Deere 7200-7300 series planters



Cast hubs
Wheels
For planters with bolt-on hubs: Deere
1700 series, Kinze & White 6000 &
8000


20
HU44-B2 cast hubs with long life
50mm 5203 bearing
SCW 1344 Spading Closing
Wheels pictured on a John
Deere 1700 series closing wheel
arm with optional drop-down
brackets. Drop down brackets
are designed for paired 13”
wheels and they help maintain a
level closing wheel arm
assembly in loose soils. See the
following page for more
information.
Most producers are good at centering their
closing wheel arm assembly above the
seed slot, however, its surprising to see
how many producers don't adjust their
closing wheel arm to run level when
planting, especially with a pair of 13”
spading closing wheels.
Low Closing Wheel Arm Rear
A 13” spading closing wheel is 1” greater
in diameter than a standard smooth
closing wheel, this is by design to allow
the wheels to engage the soil and
effectively close the seed slot as previously
discussed.
When working in looser soils, they
frequently engage the soil deeper than
within firmer soils, so to help reduce this
excessive soil engagement, down pressure
may need to be reduced (sometimes to a
minimum setting).
Greater down pressure settings tend to
lower the rear of the closing wheel arm
assembly, which reduces the gathering
action of the two spading wheels.
Negative Closing Action
Maximizing The Performance Of A
Pair Of 13” Spading Closing Wheels.
Level Closing Wheel Arm
The images to the right illustrate the
problem. Look closely at how the angle of
the closing wheel arm assembly influences
the gathering action of the spading closing
wheels.
A closing wheel arm assembly can be
leveled slightly on a 3000 series Kinze by
adjusting the eccentric bolts which attach
the arm to the planter, but John Deere and
White cannot be adjusted this way.
Positive Closing Action
Martin Single 15” Spading Closing Wheels
Wheels




Cast hubs
Adaptor axles
Wheels



Cast hubs
Wheels
1700 series, Kinze, plus White 6000
& 8000 series.


22
50mm 5203 bearing
Single SCW1544 spading closing
wheels don’t close the seed slot as
well as a pair of correctly leveled 13”
spading closing wheels, but they do
perform significantly better than a
pair of smooth factory closing wheels
in higher moisture no-till soils.
The above two photos were taken
from the same pass of a 3600 Kinze
planter while no-tilling corn into
higher moisture soybean residue.
While down pressure could be
increased on the unit with the
smooth closing wheels, the amount
of sidewall compaction would be
severe.
Martin Paired 20 Point Dimple Wheels
SCW1341D Closing Wheels




1/2 thick, heat treated T-1
material wheels with 20 rounded
points
Cast hubs
Adaptor axles



points
Cast hubs
1700 series, Kinze, plus White 6000
& 8000 series.


points
50mm 5203 bearing
The SCW1344D, 20 point dimple
wheels are a sound choice for
producers who plant most of their
crops from medium moisture to dry
conditions.
Their 20 rounded points help this
closing system performs well in hard
sod conditions plus they frequently
outperform factory closing systems in
minimum till soil conditions.
Martin Spading Closing Wheels For Early Model White Planters
These closing wheels can be added
to the White 5000 or 6000 series
planters that have single closing
tires. The Martin Spading Closing
Wheels enhance closing of the seed
trench while the smooth wheel
gently tamps the surface.
Moist soil is moved toward the seed
at seeding depth, even in wet, hard
or sod conditions. In wet conditions,
the soil is prevented from forming a
continuous ribbon by the lifting
action of the teeth as they rotate up
out of the soil.
SCW51 Spading Closing Wheels

Other benefits include:

Closing wheel arm pressure can
be greatly reduced

Seed trench is closed in the most
severe conditions

Seeding depth does not have to
be raised to insure emergence

Soil above the seed is loose,
allowing quicker emergence in a
compaction free environment




SCW61 Spading Closing Wheels



Sidewall compaction is eliminated



24
Double 13" diameter left and right
hand toothed steel wheels with
Single 2-row ball bearing
Left and right angled brackets
Fits White 5100 planters with single
closing wheels
Does not change planters’ overall
length
Double 13" diameter left and right
toothed steel wheels with diamond
shaped points
Left and right angled brackets
Fits White 6000 series planters with
single closing wheels
Does not change planters overall
length
Moist soil is moved toward the seed
at seeding depth even in wet, hard
or sod conditions. In wet conditions,
the soil is prevented from forming a
continuous
ribbon by the lifting
action of the teeth as they rotate up
out of the soil.
Other benefits include:

Closing wheel arm pressure can
be greatly reduced

Seed trench is closed in the most
severe conditions

Seeding depth does not have to
be raised to insure emergence

Soil above the seed is loose
allowing quicker emergence in a
compaction free environment

Sidewall compaction is eliminated
SCW899 Closing Wheels



9" diameter toothed steel wheels and
ball bearing hubs
Replaces closing disk on Case IH
800, 900, 1200 and 1250 planters;
for use on offset closing wheel arm
only
Also fits Deere and Kinze shallow
closing systems
Martin Spading Closing Wheels For Case Planters
The SCW899 guarantees a closed
seed trench, while the smooth
wheel gently tamps the surface.
These specially designed toothed
wheels replace the regular closing
disk.
Model SCW899. Nine-inch diameter
spikes replace covering disc on IH
planters. Not available for units without
offset covering disc arm (for example
the Early 800 series).
Martin Twisted Drag Chain
Following behind the Spading Closing
Wheels our Twisted Drag Chain helps to
further crumble and level the soil. This helps
even out the rate of drying and insures the
soil does not dry past seed depth.
This is a low cost, low maintenance way to
help increase uniform emergence in the drier
parts of the field and is a must when using
the spading closing wheels in minimum till.
By the way, some of our customers still feel
the need for some shallow tillage in the
spring and the spading closing wheels and
drag chain combination do an excellent job
in that situation.
Martin Twisted Drag Chains
are designed to follow a pair
of 13” spading closing wheels,
a pair of 20 point dimple
wheels and a
single 15”
spading closing wheel.
DCK-01 Drag Chain Kit




26
Heavy square edge cross chain and brackets
Bolts to all Max-Emerge units
Fits Kinze and White units with bolt-on wheels
Kinze units with roll pin attached closing wheels will need
holes drilled for mounting
Martin Twisted Drag Chain
The Martin Twisted Drag Chain Kit can be seen following a pair of
13” Spading Closing Wheels on a John Deere 1770 planter. Notice in
the above photo how the drag chain pulls a handful of soil along
which helps smooth and fill in any unclosed areas of the seed slot.
In combination with a pair RID-01 gauge wheel tires, the seed zone
is left slightly elevated to reduced ponding and crusting.
27
Martin Closing Systems For John Deere Grain Drills and Air Seeders
28
SCW75B4 Spading-Closing
Wheels






3/8" thick, 13" diameter right
and left toothed steel wheel
with diamond shaped points
Double threaded specially
designed axle
Fits Deere 750 and 1850
drills
Completely aerates above
seed
Creates a miniature ridge
that sheds water and helps
maintain a warmer seed
environment
SCW75B4D-20 Dimple
Closing Wheels






1/2" thick, 13" diameter steel
wheel with 20 rounded
points
Double threaded specially
designed axle
Fits Deere 750 and 1850
drills
Firms soil at rounded points
while leaving looser area
between points
Less aggressive than
SCW75B4
Martin Closing Systems For John Deere Grain Drills and Air Seeders
Wheels





3/8" thick, 13" diameter right
and left toothed steel wheel
with diamond shaped points
Fits 1560, 1860, 1590, and
1890 drills
Completely aerates above
seed
Creates a miniature ridge
that sheds water and helps
maintain a warmer seed
environment
Mounts on existing closing
wheel arm
SCW1564D-20 Dimple
Closing Wheels





Fits Deere 1560, 1860, 1590,
and 1890 drills
1/2" thick, 13" diameter steel
wheel with 20 rounded
points
Firms soil at rounded points
while leaving looser area
between points
Less aggressive than spading
closing wheels
Mounts on existing closing
wheel arm
29
Martin Spring Spacers For John Deere Drills and Air-Seeders
30
Key Benefits:




Martin Spring Spacers are available for John Deere 50 series and 60/90
series openers installed on No-Till Grain Drills and Air-Seeders.
These 3/8” spacers are easily installed within the spring assembly and
increase the opener down pressure by approximately 75 lb.
Designed to be installed behind air-cart wheels or tractor wheels, where
additional down pressure is frequently required.
Can be paired up. When a pair of spring spacers are added in tandem, they
can provide an additional 150 lb of down force per opener. This
configuration is especially suitable for heavy air-carts which leave
compacted and lowered wheel tracks, which present penetration difficulties.
SS-50
Designed to install within all
50 series John Deere openers.
SS-60
Designed to install within all
60 and 90 series openers.
Martin Industries, LLC warranties its product to be free from defects in
materials and in workmanship for one full year from date of sale to the
original user.

The warranty is valid provided defective part(s) is received within twenty
days of discovery.

Martin Industries, LLC has the option to either repair or replace any parts
that were determined to be defective due to material or workmanship.

Any improper use, including operation after discovery of defective or
worn parts, operation beyond rated capacity, or substitution of parts not
approved by Martin Industries, LLC. shall void this warranty.

No dealer, employee, or representative is authorized to change this
warranty in any way or grant any other warranty unless such change is in
writing and signed by an officer of Martin Industries, LLC at its home
office.
Martin Warranty
Martin Warranty
31

Martin Industries, LLC. • 800.366.5817

Transcription

Similar documents

hotrock - The Spokesman Pro Bike Works

Pool of Radiance^Codewheel

custom duallies!

Excellent Dining - Scandia Furniture

antique car replica / horseless carriage wheels

www.livorsi.com/auto Quick Release Billet Hub Adapter Kit

Black Bird CO2 Dragster

Errata for Manos Cotton Stria Baby Blanket Collection

OmegaTrac Brochure - MTS Mobility Solutions

transwheel aluminum wheel repair guide