docHALLOWEEN
download 
Report Transcription
HALLOWEEN
DESIGN PROJECT HALLOWEEN NECKLACE “GLAMOROUS BAT” 8 mm 5000 HALLOWEEN NECKLACE “GLAMOROUS BAT” 8 mm 5810 White Alabaster 4 281 White Opal 7 234 Crystal Ivory Pearl 90 001 708 Stringing 8 mm 5000 Supplies Black Buttonhole silk SWAROVSKI ELEMENTS Silver Crimping tube Article Product Group Article No. Amount Size Buttons 3014 2 pcs. 12 mm Buttons 3017 2 pcs. Beads 5000 3 pcs. 8 mm Crystal Beads 5000 4 pcs. 8 mm White Alabaster Beads 5000 7 pcs. 8 mm White Opal Jump ring Jump ring 12 mm Color Silver 7 mm Jet Silver 280 Jet Hematite Resin 5 mm Split ring Crystal Pearls 5810 90 pcs. Tiger tail 280 HEM Black Lace Lobster clasp Color Code 5 mm 8 mm 0.3 Crystal mm Ivory Pearl Tools Crimping pliers Double sided tape Flat nose pliers Paint brush A4 Plastic wrap A4 001 Silver 281 Clear 234 Silver 001 708 Silver 2m Supplies & Tools 2 Supplies 1 Buttonhole silk, black, 2 m 2 x Crimping tube, silver 1 1x Jump ring, silver, 5 mm 1x Jumpcm ring, silver, 7 mm 25x13 Lace, black, 25 x 13 cm 1 x Lobster clasp, silver 1 Resin clear 2 x Split ring, silver, 5 mm Tiger tail, silver, 0,3 mm, 110 cm 2 Tools cm 110 Crimping pliers Double sided tape Flat nose pliers 1 x Paint brush, A4 1 x Plastic wrap, A4 Pins Sheet of paper Sewing needle Scissors Side1cutter 1 Pins Level of design: INTERMEDIATE Have also a look at the text instruction last page! Sheet at of the paper Sewing needle Scissors Side cutter STEP 1 Step 1 WWW.CREATE-YOUR-STYLE.COM 2/9 STEPStep 2 2 x74 1/2 3 Step 2 x74 1/2 3 1 110 cm 2 x16 Step 3 1/2 1 110 cm 3 2 x16 3 3 1/2 3.4 cm 3 Step 3 STEP 3 3.4 cm 7 cm 19.5 cm 7 cm 19.5 cm WWW.CREATE-YOUR-STYLE.COM 3/9 Step 4 STEP WWW.CREATE-YOUR-STYLE.COM 4/9 STEP Step 5 5 8 hrs STEP 4 WWW.CREATE-YOUR-STYLE.COM 5/9 STEP 6 Step 6 STEP 7 Step 7 1m WWW.CREATE-YOUR-STYLE.COM 6/9 x4 Repeat Repeat x2x2 Repeat step Repeat stepx3 x3 WWW.CREATE-YOUR-STYLE.COM 7/9 WWW.CREATE-YOUR-STYLE.COM 8/9 HALLOWEEN NECKLACE “GLAMOROUS BAT” STEP 1:Connect a lobster clasp to a 5 mm jump ring and then to one 5mm split ring using flat nose pliers. Open a 7 mm jump ring and connect it to the other 5 mm split ring. STEP 2:Cut 110 cm of tiger tail and slide on a crimping tube. Thread it through a 5 mm split ring which is connected to the lobster clasp, thread it back through the crimping tube and crimp the tube. Cut off the extra tiger tail. Slide the Beads and Crystal Pearls from the SWAROVSKI ELEMENTS assortment onto the tiger tail as shown in the illustrations. Slide on a crimping tube at the other end. Thread the tiger tail through the 5 mm split ring which is connected to the 7 mm jump ring and thread it back through the crimping tube. Crimp the crimp tube and cut off the extra tiger tail. STEP 3: Draw the pattern or cut out the illustrations according to the sizes shown in the illustrations. STEP 4: Stick double sided tape on the back of the pattern, place it over the lace and cut it out. STEP 5:Put the lace bat on top of a piece of plastic wrap and strengthen it by applying resin using a paint brush. Dry it overnight. STEP 6: Attach the lace bat onto the necklace with pins. STEP 7:Cut 1 m of buttonhole silk and make four back stitches on the bat. Stitch over to the top of the bat and insert one of the Sew-on Stones from the SWAROVSKI ELEMENTS assortment onto the bat as shown. Attach the bat to the pearl and bead strand by winding the silk around and between the Crystal Pearls as you stitch on the Sew-on stone. Repeat this step three times with the other three Sew-on stones from the SWAROVSKI ELEMENTS assortment as shown attaching both sides of the bat pattern onto the necklace. WWW.CREATE-YOUR-STYLE.COM 9/9
