docARX door nova 1 stran.cdr
download 
Report Transcription
ARX door nova 1 stran.cdr
The Perfect Move Secure and convenience Hardware ARX Door for PVC Catalogue of products 2015 Photography by: Kovinoplastika Lož d.d. All the information in the following brochure has been carefully selected and verified. In the time of ever-growing technical progress and improvements, necessary changes constantly take place. We therefore thank you for your understanding, as we can not be held responsible for the correctness and completeness of the brochure content due to the reasons mentioned above. We reserve all the rights, especially the right to reproduce and transmit all parts of this publication. Copyright: 2015 Kovinoplastika Lož d.d., Lož, Cesta 19. oktobra 57, SI-1386 Stari trg pri Ložu tel.: +386 1 70 95 100, fax: +386 1 70 95 553 e-mail: info@kovinoplastika.si, www.kovinoplastika.si Secure and convinience With multi point locking systems, ARX Door locks offers solutions for the most diverse security requiremenrs. Beside the latch and steel deadbolt in the main lock, your door is fixed at additional locking points such as locking R cam and hook. ARX door locks offer a wide selection of solution methods both for single - leaf and double - leaf doors. They also provide increased manoeuvring, as the door height can be increased by using a variety of combinations. Besides high - security level they also ensure good sealing down the whole door - frame. Strong sealing reduces the loss of thermal energy and improves sounds insulation. The following details add extra strength: ARX Door lock system enables you to lock the main lock and sopplementary locking - points with the lever handle already. In the next step you can block the system with a key. Main lock Door lock One of the distinct characteristic of door locks is definitely increased safety, provided by steel hooks on the lower and upper door locks. Hooks can be closed in different directions and are locked in the closed position. A hardened steel fragment has been built-in to hooks. The combination of a hook and closing pin ensures increased safety to ARX Door locks. Closing pin ARX Door locks include 4 closing pins, creating a powerful contact presure and consequently provide strong sealing with the door leaf. Furthermore, the use is simple and easy by applying minimal force (effect of bearing). Rolling security pin ARX Door locks include 4 Rolling security pins, creating a powerful contact presure and consequently provide strong sealing with the door leaf. Furthermore, the use is simple and easy by applying minimal force (effect of bearing). The main purpose is to increase intruders out. A wide range of application ARX Door locks offer a wide range of options for French/double - leaf doors. They provide increased meanoeuvring, as the door height can be increased by using a variety of combinations. Complete solution of door locks. - door locks 1 Door hardware The PAS 24 compliant Single and French Door Locks incorporate hooks with anti - saw steel fragments inside Endurance and reliability ARX door locks are PAS 23 compliant and have been tested to 200.000 cycles Convenience for large manufacturer by allowing stock reduction and improving production efficiency Adjustable keeps are suitable for variety of PVC profiles Opposing hooks with anti - saw steel fragments Closing roller enable smooth operation and perfect weather sealing Wider height range allows variety of add - on combinations, which makes them suitable for wide range of Single and French Door sizes Extra strong solution for Single and French Door ARXCoat - High quality surface protection ARXCoat surface protection gives excellent appearance to building hardware and simultaneously ensures long-term and durable surface. It maintains very high corrosion resistance in severe conditions and extreme climate, exceeding Grade 5 of EN1670 (480 hours exposure to salt spray), thereby guaranteeing long-term and simple use without any maintenance trouble. How have we accomplished this? Through a special technological process that consists of electroplated zinc coating and low-temperature thick-layer passivation, followed by application of organic sealant to increase the anti-corrosion properties 2 - door locks Secure and convenience ARX Door locks allows you to get higher level Abbrevation area Closing pin Hook Closing pin Door latch Main lock Door deadbolt Closing pin Hook Closing pin - door locks 3 Handle operated Lock Single spindle Inside / Outside Locking Handle up - Locking Turning Cylinder - blocking Inside / Outside Unlocking Inside Outside Inside Outside Turning Cylinder - unblocking Handle down - unlocking & pull latch inside Inside / Outside Dailyoperating Handle down - pull latch inside Split (double) spindle Inside / Outside Locking Handle up - Locking Turning cylinder - blocking Unlocking Inside: Turning Cylinder - unblocking Handle down - unlocking & pull latch inside Outside: Turning cylinder - unblocking Handle down - unlocking Turning cylinder - pull latch inside Dailyoperating Inside: Handle down - pull latch inside Outside: Turning Cylinder - pull latch inside 4 - door locks Abbreviations GENERALABBERVIATIONS ARX DOOR HL - Multi point lock - Handle Lock 16/2 (15,8/2,25) -Face - plate width/thickness Backset - 25, 28, 35, 40, 45, 50, 55, 65 mm Hole distance - 92 mm Spindle - reciver - 8 x 8 mm Handle height - 1020 mm Roller diameter - 11 mm Shootbolt diameter - 9 mm(2 x 9 mm) Surface finish - ARXCoat ABBREVIATIONS IN THE TABLES BS - Backset HD - Hole distance HH - Handle distance - Spindler - reciver SF - Surface finish AC - ARXCoat (silver surface finish) PQ - Packaging quantity ABBREVIATIONS IN THE DRAWINGS BS - Backset HD - Hole distance HH - Handle height SH - Sash height M.W. - Milling width S.H.C. - Spindle hole centre C.M.L.C. - Centre of main - lock casing - Croppable - door locks 5 ARX DOOR HL Single door - 4R door lock 11 2 ARX DOOR HL(25-65)/92/8 2200/2x16 4R BS HD 25 28 35 40 45 50 55 65 92 92 92 92 92 92 92 92 HH 8 8 8 8 8 8 8 8 1020 1020 1020 1020 1020 1020 1020 1020 SF PQ Mat. Nr AC AC AC AC AC AC AC AC 50 50 50 50 50 50 50 50 1101138 1098444 1098445 1098446 1098447 1098448 1098449 1098450 SF PQ Mat. Nr STRIKER Description 2a CENTRE LACHT KEEP R AC 50 1098432 2a CENTRE LACHT KEEP L AC 50 1098433 2b ROLLER KEEP AC 300 Alphacan 70 - 80 Aluplast 2/3/4/5/6000 Conch Deceuninck Prestige Egepen Gealan 3/7/8000 Inoutic Prestige KBE 70 AD GMG Prestige Kommerling Pimapen S6000/S7500 Rehau S730 Roloplast 3/5/6/7/800 Roplasto 7001 AD Salamander Schuco Thyssen Prestige Trocal Veka Topline/Softline Weiss WP3/WP4/WP5000 AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 1083205 1083204 1083202 1083206 1083206 1083203 1083206 1083205 1083204 1083205 1083204 1083204 1083205 1083204 1083204 1083204 1083206 1083205 1083202 1083204 2b 1 2a PACKERS for Centre latch keep, Rooler keep Description Description SF OPOSSING HARDWARE GROOVE - up OPOSSING HARDWARE GROOVE - down ALUPLAST 2/3000 ROLOPLAST 3/5/6/8000 GEALAN 3/7/8000 PEŠTAN S-509 - up PEŠTAN S-509 - down ALPHACAN 70-80 REHAU S730 KBE AD 9 VEKA topline/softline INOUTIC Prestige - up INOUTIC Prestige - down ROPLASTO 7001 AD TROCAL Innova 2000/70.A5 AD/70.M5 MD .. KOMMERLING Eurofutur Clasic/Elegance/88plus .. SHUCO Corona AD/CT 70 AD/CT 70 MD/SI82MD 2b PROFILE SPECIFIC PQ PQ 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Mat.Nr Nr Mat. 1098435 1098436 1098437 1098438 1098439 1098440 1098441 1100961 1100962 1100963 1100964 1100965 1100966 1100967 1100968 1102279 1102280 2b 2b 6 - door locks (920) 1020 100 mm can be cut 745 375 117 200 26 (1800) 1900 - 2200 375 745 11 300 mm can be cut Technical details S.R.H. (1800) 1900 - 2200 mm FACE-PLATE LENGHT 2200 mm - door locks 7 ARX DOOR HL Single door - 4R2H door lock 11 2 ARX DOOR HL (28-65)/92/8 2200/2x16 4R2H BS BS HD HD 28 35 40 45 50 55 65 92 92 92 92 92 92 92 HH HH 8 8 8 8 8 8 8 1020 1020 1020 1020 1020 1020 1020 SF SF PQ PQ AC AC AC AC AC AC AC 50 50 50 50 50 50 50 Mat. Mat.Nr Nr 1099768 1099769 1099770 1099851 1099852 1099853 1099854 2c 2d STRIKER Mat. Nr Nr Mat. Description Description SF SF PQ PQ 2a CENTRE LACHT KEEP R 2a CENTRE LACHT KEEP L AC 50 1098432 AC 50 1098433 2b HOOK KEEP AC 100 1098434 2c 2d ROLLER KEEP AC 300 Alphacan 70 - 80 Aluplast 2/3/4/5/6000 Conch Deceuninck Prestige Egepen Gealan 3/7/8000 Inoutic Prestige KBE 70 AD GMG .. Prestige Kommerling Pimapen S6000/S7500 Rehau S730 Roloplast 3/5/6/7/800 Roplasto 7001 AD Salamander .. Schuco Thyssen Prestige Trocal Veka Topline/Softline Weiss WP3/WP4/WP5000 AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 2b PROFILE SPECIFIC 1083205 1083204 1083202 1083206 1083206 1083203 1083206 1083205 1083204 1083205 1083204 1083204 1083205 1083204 1083204 1083204 1083206 1083205 1083202 1083204 2c 2d 2a 3a 3a 1a 1a PACKERS for Centre latch keep, Hook keep, Rooler keep PQ PQ 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Mat.Nr Nr Mat. 1098435 1098436 1098437 1098438 1098439 1098440 1098441 1100961 1100962 1100963 1100964 1100965 1100966 1100967 1100968 1102279 1102280 SF SF PQ PQ Mat. Mat. Nr Nr AC 100 1094444 AC 100 1094654 PQ PQ 100 100 Mat. Mat.Nr Nr 1096648 1097415 Description Description SF OPOSSING HARDWARE GROOVE - up OPOSSING HARDWARE GROOVE - down ALUPLAST 2/3000 ROLOPLAST 3/5/6/8000 GEALAN 3/7/8000 PEŠTAN S-509 - up PEŠTAN S-509 - down ALPHACAN 70-80 REHAU S730 KBE AD 9 VEKA topline/softline INOUTIC Prestige - up INOUTIC Prestige - down ROPLASTO 7001 AD TROCAL Innova 2000/70.A5 AD/70.M5 MD .. KOMMERLING Eurofutur Clasic/Elegance/88plus .. SHUCO Corona AD/CT 70 AD/CT 70 MD/SI82MD 3 3 2c 2c 2d ONE - PIECE STRIKER Description Description 3a ONE-PIECE STRIKER 1865 R 3a 3a ONE-PIECE STRIKER 1865 L 2b 2c PACKERS for One - piece striker Description Description Veka Matrix FS Rehau S706 co-ex 8 - door locks SF 2c 2d can be cut 80 150 1050 833 753 603 (1850) 1950 - 2200 26 587 737 840 150 18,5 103 2 11 250 mm can be cut 7,5 100 mm 18.5 200 66,5 35 117 1865 Technical details (1850) 1950 - 2200 mm S.R.H. FACE-PLATE LENGHT 2200 mm - door locks 9 ARX DOOR HL Single door - 4RS door lock 11 ARX DOOR HL (28-65)/92/8 2200/2x16 4RS BS HD 28 35 40 45 50 55 65 92 92 92 92 92 92 92 21 Extension 2a 1 400/2x16 1R 31 SHOOTBOLT HH 8 8 8 8 8 8 8 1020 1020 1020 1020 1020 1020 1020 Description Description Description Description 3a 1 140/2x16 3b 1 140/2x16 REVERSE ACTION 4 SF PQ Mat. Nr AC AC AC AC AC AC AC 50 50 50 50 50 50 50 1098451 1098452 1098453 1098454 1098455 1098456 1098457 3b 1 2a 1 SF SF PQ PQ AC 20 SF SF PQ PQ AC 2700 1102206 AC 2700 1102205 SF PQ Mat. Mat.Nr Nr 1099217 Mat. Mat.Nr Nr 4b 4b 1 STRIKER Description Mat. Nr 4a CENTRE LATCH KEEP R AC 50 1098432 4a CENTRE LATCH KEEP L AC 50 1098433 4b ROLLER KEEP - security AC 100 ALUPLAST 2/3000 ALUPLAST 4/5/6000 KBE 70 AD REHAU S730 THYSSEN Prestige VEKA Topline/Softline KBE AD9 AC AC AC AC AC AC AC 100 100 100 100 100 100 100 1083219 1083216 1083217 1089625 1083218 1083214 1083220 PQ PQ 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Mat.Nr Nr Mat. 1098435 1098436 1098437 1098438 1098439 1098440 1098441 1100961 1100962 1100963 1100964 1100965 1100966 1100967 1100968 1102279 1102280 PROFILE SPECIFIC 4b 4b 1 PACKERS for Centre latch keep Description Description SF OPOSSING HARDWARE GROOVE - up OPOSSING HARDWARE GROOVE - down ALUPLAST 2/3000 ROLOPLAST 3/5/6/8000 GEALAN 3/7/8000 PEŠTAN S-509 - up PEŠTAN S-509 - down ALPHACAN 70-80 REHAU S730 KBE AD 9 VEKA topline/softline INOUTIC Prestige - up INOUTIC Prestige - down ROPLASTO 7001 AD TROCAL Innova 2000/70.A5 AD/70.M5 MD .. KOMMERLING Eurofutur Clasic/Elegance/88plus .. SHUCO Corona AD/CT 70 AD/CT 70 MD/SI82MD 4a 14a 1 4b 4b 1 4b 4b 1 3a 10 - door locks 100 mm can be cut 140 mm have to be cut 40 mm can be cut 1020 745 (920) 1020 745 375 375 200 117 26 375 (1800) 1900 - 2200 (2200 - 2435) 1800 - 1860 1995 -2235 375 745 745 175 mm can be cut 11 400 80 300 mm can be cut 175 mm can be cut 300 mm can be cut 40 mm can be cut 135 Technical details (1800) 1900 - 2200 mm S.R.H. FACE-PLATE LENGHT 2200 mm - door locks 11 ARX DOOR HL French door - 4R door lock 11 2 1 ARX DOOR HL(25-65)/92/8 2200/2x16 4R BS HD 25 28 35 40 45 50 55 65 92 92 92 92 92 92 92 92 HH 8 8 8 8 8 8 8 8 1020 1020 1020 1020 1020 1020 1020 1020 SF PQ Mat. Nr AC AC AC AC AC AC AC AC 50 50 50 50 50 50 50 50 1101138 1098444 1098445 1098446 1098447 1098448 1098449 1098450 4c 1 3b 1 3c 1 SF SF PQ PQ AC 2400 SF SF PQ PQ AC 2700 1102206 AC 2700 1102205 AC 2700 1101899 SF PQ Mat. Nr AC 50 1098432 AC 50 1098433 AC 300 1083207 AC 100 1102281 SF PQ PQ 100 100 Mat.Nr Nr Mat. 1098435 1098436 Description Description SF ALUPLAST 2/3000 ROLOPLAST 3/5/6/8000 GEALAN 3/7/8000 PEŠTAN S-509 - up PEŠTAN S-509 - down ALPHACAN 70-80 REHAU S730 KBE AD 9 VEKA topline/softline INOUTIC Prestige - up INOUTIC Prestige - down ROPLASTO 7001 AD TROCAL Innova 2000/70.A5 AD/70.M5 MD KOMMERLING Eurofutur Clasic/Elegance/88plus SHUCO Corona AD/CT 70 AD/CT 70 MD/SI82MD PQ PQ 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Mat.Nr Nr Mat. 1098437 1098438 1098439 1098440 1098441 1100961 1100962 1100963 1100964 1100965 1100966 1100967 1100968 1102279 1102280 Description Description 2a 1 400/2x16 1R 31 SHOOTBOLT Description Description 3a 1 140/2x16 3b 1 135/2x16 RA 1) 3c 1 150/2x16 - OHG 4 STRIKER 2) Description 2) 4a CENTRE LATCH KEEP R - OHG 4a CENTRE LATCH KEEP L - OHG 2) 4b ROLLER KEEP - OHG 4c SHOOTBOLT KEEP 2a 1 4b 1 EXTENSION 2) Mat. Mat.Nr Nr 1099217 Mat. Mat.Nr Nr 4b 1 4b 1 PACKERS for Centre latch keep Description Description OPOSSING HARDWARE GROOVE - up OPOSSING HARDWARE GROOVE - down 4a 1 1 1 PACKERS for Shootbolt keep 4b 1 4b 1 3c 1 3a 1 4c 1 1) Reverse Action 2) Opossing Hardware Groove 12 - door locks 40 mm can be cut 12 140 mm have to be cut 17 21 4,5 1020 140 150 745 375 200 26 375 (2200 - 2435) 1800 - 1860 1995 -2235 117 745 175 mm can be cut 11 400 80 175 mm can be cut 40 mm can be cut 300 mm can be cut 150 21 135 Technical details 12 8 41 S.R.H. (1800) 1900 - 2200 mm FACE-PLATE LENGHT 2200 mm - door locks 13 ARX DOOR ARX DOOR HL/W - Detailed dimensions of main lock with 35mm backset BS = 35 BS = 35 BS = 35 R9 18 11 10 10 42 19 19 21,5 HD = 92 122 134 200 30 62 HD = 92 122 134 200 33 12 32 200 C.M.L.C. 30 HD = 92 122 134 7,5 30 19 21,5 22 33 32 30 12 8 7,5 8 42 30 8 C.M.L.C. 20 30 30 19 6 17 15,5 17 6 M.W. 17 M.W. 15,5 15,5 19 M.W. 30 20 19 Backset 28 35 40 45 50 55 65 14 18 11 R9 18 11 ARX DOOR HL/P - Detailed dimensions of main lock with 35mm backset R9 ARX DOOR HL - Detailed dimensions of main lock with 35mm backset - door locks 28 35 Backset / 45 / 55 65 Backset 28 35 40 45 50 55 65 STRIKERS Hook Keep Roller keep Roller keep 27,2 13,2 27,2 13,2 27,2 13,2 16,9 106 13 Roller keep security 32 90 63,8 18 50 30 200 88 30 50 40 106 41 94 45 57 50 8 8 8 Centre Latch Keep Double shootbolt keep 41 37 27,7 10,5 13,2 200 8 Packers assembly on Centre latch keep, Hook keep, Roller keep and Double shotbolt keep - door locks 15 ADJUSTMENT INSTRUCTIONS Adjustment instructions R cam SW 4 mm Gasket compression adjustment in mm Adjustment range in Basic setting +/- 0,8 90 90 Adjustment instructions RS cam 10 mm SW 2,5 mm Adjustment range in Gasket compression adjustment in mm Basic setting +/- 0,8 90 16 - door locks 90 ARX DOOR HANDLES ARX DOOR HANDLES ES0 (SK1) - Spindler-Reciver 8 mm Colour HD F1 - Silver F4 - Bronze F9 - Titan F9010 - White 92 92 92 92 8 8 8 8 PQ Mat. Nr 1 1 1 1 1053417 1053418 1053419 1053422 ARX DOOR HANDLES ES0 (SK1) - Spindler-Reciver 10 mm Colour HD F1 - Silver F4 - Bronze F9 - Titan F9010 - White 92 92 92 92 PQ 10 10 10 10 Mat. Nr 1 1 1 1 1053423 1053424 1053425 1053426 Screws are enclosed - thickness of the door (67 mm - 72 mm) For the larger thickness of the door (72 mm - 77 mm) are available another sets of screws 3Set of screws Es0 (Sk1) for thickness of door sash 72 - 77 mm 1 Colour HD F1 - Silver F4 - Bronze F9 - Titan F9010 - White 92 92 92 92 8 8 8 8 PQ Mat. Nr 1 1 1 1 1055483 1055485 1055483 1055486 Door handles with new level of security ESO (Sk1), represent increased respectively higher security in comparision with usual door handles. 54 54 6 95 250 92 78 21,5 116,5 /o 10 /o 10 78 21,5 116,5 92 250 95 128 128 6 54 12 8 54 - door locks 17 ARX DOOR HANDLES ARX DOOR HANDLES ES0 (SK1) - Spindler-Reciver 8 mm Colour HD F1 - Silver F4 - Bronze F9 - Titan F9010 - White F8707 - Brown 92 92 92 92 92 8 8 8 8 8 PQ Mat. Nr 1 1 1 1 1 1053400 1053401 1053403 1053405 1053406 Screws are enclosed - thickness of the door (67 mm - 72 mm) For the larger thickness of the door (72 mm - 77 mm) are available another sets of screws 2Set of screws Es0 (Sk1) for thickness of door sash 72 - 77 mm 1 Colour HD F1 - Silver F4 - Bronze F9 - Titan F9010 - White F8707 - Brown 92 92 92 92 92 8 8 8 8 8 PQ Mat. Nr 1 1 1 1 1 1055473 1055477 1055473 1055479 1055481 Door handles with new level of security ESO (Sk1), represent increased respectively higher security in comparision with usual door handles. 30 18 - door locks 55 129 245 92 21,5 109 70 /o 10 21,5 /o 10 70 8 109 93 55 92 245 129 93 6 8 8 30 NOTES Arx is registered trademark of Kovinoplastika Lož inc. KOVINOPLASTIKA LOŽ d.d. Cesta 19. oktobra 57 • SI-1386 Stari trg pri Ložu • Slovenija Telefon: +386 (1) 70 95 100 • Fax: +386 (1) 70 95 553 info@kovinoplastika.si • http://www.kovinoplastika.si
