Mid-Atlantic Life Sciences Showcase

Transcription

Mid-Atlantic Life
Sciences Showcase
Presented by the ISPE Chesapeake Bay Area Chapter in coordination with BioBuzz
March 25, 2015
2:00 PM - 7:00 PM
The Universities at Shady Grove
Rockville, Maryland
2015 Exhibitor Guide
The Mid-Atlantic Life Sciences Showcase is presented by the ISPE
Chesapeake Bay Area Chapter in coordination with BioBuzz and
sponsored by:
Special Recognition to the Showcase Committee:
Ben Skowronski, Hydro Service & Supplies (Event Chair)
Sybil McDowell, New England Laboratory Casework
Chris Frew, BioBuzz
Andy Eckert, BioBuzz
William Neutzling, TechUSA
Abby Rutman, Azzur Group
Nic Bogren, Azzur Group
Joe Morin, alliancebio, LLC
AGENDA
2:00-3:15PM
Bioreactor Contamination Control Seminar
Speakers:
Marc Pelletier, Director, Strategic Consulting – CRB Engineers
Andrew Harris, Senior Process Engineer – CRB Engineers
Bob Valdes, Industry Consultant – alliancebio, LLC
Moderator:
Joe Morin, Industry Consultant – alliancebio, LLC
3:00 PM
Showcase Open
3:45 - 5:00PM
Bioreactor Contamination Control Continues
5:15PM
Welcome Address “Maryland - Open for Business”
Judy Costello, Acting Executive Director - BioMaryland
Mike Gill, Acting Secretary, Maryland Department of Business
and Economic Development
6:45PM
Final Remarks, Raffle Drawing
7:00PM
Showcase Closed
Career Opportunities
Several of our exhibiting companies are recruiting at today’s show.
Please stop by and see them.
Table #
23 Abcam
65 AERAS
22 Astrazeneca / MedImmune
9 Novavax
24 ProPharma Group
64 TechUSA
2015 ISPE-CBA Corporate Sponsors
Partner:
CAI - Commissioning Agents, Inc.
Associate:
Azzur Group
Dagard USA
Hydro Service & Supplies
Neu-Ion, Inc.
QPS, LLC
Donor
alliancebio, LLC
CRB
Heffron Company
High Purity Systems, Inc.
ProPharma Group
TAI Engineering
WGS Equipment & Controls, Inc.
Whiting-Turner Contracting Co.
23
13
63
65
5
22
42
46
47
48
32
67
1
2
3
11
31
10
17
Abcam
Accuflow Systems Inc
Advanced Scientific
AERAS
alliancebio, LLC
AstraZeneca / MedImmune
Astro Pak
Atlantic Technology Group
Azzur Group
Belimed
BioMaryland
BioMaryland
BioMaryland
Bio-Rad Laboratories
CAI (Commissioning Agents Inc.)
CC Biotech LLC
cGMP Validation LLC
25
16
59
21
37
66
8
53
7
44
68
54
40
57
14
27
Charter Medical Ltd
Cleanseal - A Division of ASI Doors, Inc.
ClorDiSys Solutions, Inc
CRB
Dagard Usa
Dibert Valve & Fitting Co.
Diversified Laboratory Repair
Eastern Controls, Inc.
EMD Millipore Corporation
Evoqua Water Technologies
GF Piping Systems
Harrington Pure - SED North America
Hydro Service and Supplies
Intellitech, Inc.
Irvine Scientific
JacobsWyper Architects
55
51
52
15
29
4
36
69
9
50
43
58
49
28
24
33
6
Kinetic Systems, Inc.
Lonza
M. Davis
Meridian BioGroup LLC
Mesa Monitoring
Mount St. Mary's University
Neu-Ion, Inc.
New England Lab
Novavax
Panasonic Healthcare
Paul Mueller Co.
PCI
Philip R. Walker & Assoc., Inc.
POMS Corporation
ProPharma Group
Qualification Process Solutions - QPS
Roberts Oxygen Co, Inc.
41
20
34
19
60
45
35
38
30
26
64
39
61
62
71
72
70
18
56
12
RURO, Inc.
Sani-Matic
Sentinel Process Systems
Shickel Corporation
Siemens Industry Inc
Simtech USA
SPS CleanTech, LLC
Stainless Fabrication, Inc.
STERIS Life Science
TAI Engineering
Tech USA
The Whiting-Turner Contracting Company
Triangle Process Equipment
UMCP Biological Sciences
Vaisala Inc
Vigilant Bioservices
Worldwide Life Sciences
Abcam
Magda Benavides
magda.benavides@abcam.com
240-447-9346
www.abcam.com
Accuflow Systems Inc
Erik Mueller
erikmueller@accuflowsystems.com
301-788-1933
www.accuflowsystems.com
Advanced Scientific
Tom Hill
tom@advancedscitek.com
443-621-7759
Discover more with our high-quality
protein research tools, expert technical
support, fast global delivery, and up-todate and honest data. Our growing
range of products include primary and
secondary antibodies, biochemicals,
proteins, peptides, lysates,
immunoassays and other kits. Products
are made in-house, as well as sourced
externally, and are extensively tested.
Accuflow Systems is a complete
supplier of the highest quality
pharmaceutical manufacturing and
bioprocess supplies and equipment.
Saint Gobain Custom Disposable
Manifolds and Assemblies, Tubing and
Hoses, Metro Shelving and Carts,
ERGOfit Chairs, Aquasyn valves,
gaskets and o-rings, Stainless Steel
standard and custom pieces and
Cleanroom supplies. Also featuring
SteraMist® AIHP decontamination
equipment for your GMP Suite cleaning
protocol from TOMI Environmental
Solutions. -Reliable products. Reliable
service. Reliable people.
JuLi Stage live cell imaging in your
incubator; Automated Multiplexing
ELISAs; Automated Nucleic Extraction;
Protein Maker 24 column automated
protein purification, PlugMaker &
Optimatrix Maker for protein
crystallization, Ion Torrent NGS Service;
CustomArray microarrays, Scanner,
OligoSynthesizer, Pooled Oligos;
Preddator Nano Dispensor; RapidPick
Automated Colony Picker; WellPro
Automated Liquid Handling; DNA Mutant
Libraries; Exosome Stds & extraction;
Freezers, Refrigerators, Hypoxic
Chambers.
AERAS
info@aeras-cmo.com
301-547-4828
www.aeras-cmo.com
alliancebio, LLC
Joseph Morin
joem@alliancebio.us
301-674-5397
www.alliancebio.us
Aeras Contract Manufacturing, located
in Rockville, Maryland, helps clients with
the difficult, challenging and complex
process of translating vaccines
(including subunit antigen and viral
vaccines) and other biopharmaceuticals
(including recombinant proteins and
monoclonal antibodies) from the
research lab through Phase I-II clinical
development. Through a
comprehensive range of service
offerings, our team provides end-to-end
support from process development
through cGMP manufacturing and fill/
finish of clinical trial materials. With a
strong record of on-time, on-budget
delivery of services, Aeras enables
clients to progress their process
knowledge and capabilities and advance
products through pre-clinical and clinical
development.
Uniquely comprised of Capital Project
and Operations Management
professionals, alliancebio guides LifeScience clients through all phases of a
capital project, including the key
milestone transition to 24/7 cGMP
operations and licensure. Owner’s Rep
Services Include:
CORPORATE SPONSOR
- GMP Capital Project Management &
Assessments
- GMP Facility Design Review &
Start-Up
- GMP Facility Commissioning &
Qualification
- Assessing & Improving UnderPerforming Sites
-Strategic Hiring & GMP Staff
Augmentation
AstraZeneca / MedImmune
Aaron Vernon
vernona@medimmune.com
301-398-4523
www.astrazeneca.com
www.medimmune.com
Astro Pak
Carolyn Morgan
cmorgan@astropak.com
908-566-1246
www.astropak.com
Atlantic Technology Group, Inc.
Dave Jenkins
jenkinsatg@aol.com
804-539-1165
MedImmune is the global biologics
research and development arm of our
parent company AstraZeneca, a
recognized global leader in
biopharmaceutical research and
development. By combining
AstraZeneca’s worldwide presence with
our distinct and unique culture,
processes, and standards, we continue
to solve global healthcare challenges,
redefine science, deliver better
medicines, and help people live longer,
healthier lives. Our therapeutic areas
include Oncology, Cardiovascular/
Metabolic Disease, Infectious Disease/
Vaccines, Neuroscience, and
Respiratory, Inflammation, and
Autoimmunity (RIA).
Astro Pak is the leader in providing
Passivation, Precision Cleaning and
High-Purity Chemical Cleaning services
for a wide variety of critical systems and
components. Our services and products
leverage decades of experience to
deliver the most effective chemistries
and techniques, resulting in increased
equipment longevity, reduced corrosionrelated downtime and regulatory
compliance in client facilities. We
recently launched our electropolishing
service.
Laboratory and Process Equipment,
representing BMTUSA, LYTZEN,
PROSYS, SIXLOG, ESCO, MIELE,
ELGA, GIRTON, PERCIVAL, COY,
POWERS SCIENTIFIC
MIELE PROFESSIONAL
www.labwashers.com
-Laboratory Glassware Washers
BMT www.bmtus.com
- cGMP and Laboratory Sterilizers
-Bulk Sterilizers
-Pure and Clean Steam Generators
-LYTZEN Dry Heat Ovens
-Laboratory Incubators and Ovens
PROSYS www.prosysus.com
-Isolators
-Downflow Booths
-Sampling Technology
Azzur Group
Nate Roman
nate.roman@azzurgroup.com
800-726-0331 x 519
www.azzur.com
CORPORATE SPONSOR
Belimed
Gordon Leichter
gordon.leichter@belimed.com
585-329-0497
www.belimed.com
Bio-Rad Laboratories
Laura Kronbetter
laura_kronbetter@bio-rad.com
510-741-6868
www.bio-rad.com
We are a partnership of companies, a
team of talented professionals, an
alliance of like-minded individuals; all
strategically unified to better serve you.
By combining our varied skill sets and
industry expertise, we have been able to
develop a comprehensive service line
that is designed to help your business
throughout every steop of the system life
cycle. From discovery to Delivery™,
whatever you need, we can do.
Belimed is a provider of high quality
washers and sterilizers for use in
pharmaceutical and bio-pharmaceutical
manufacturing and research. Contact
Gordon Leichter for further information:
Gordon.leichter@belimed.com or +1585-329-0497
Bio-Rad Laboratories is a leading
provider of innovative tools to the life
science and clinical diagnostics markets,
where the company’s products are used
for scientific discovery, drug
development, and biopharmaceutical
production. Bio-Rad’s Life Science
Group has long served the
bioprocessing industry by supplying
advanced purification and process
technologies. Bio-Rad provides a full
line of scalable process chromatography
resins to meet your purification needs
with worldwide access and personalized
service and support.
BioMaryland
Judy Costello
judith.costello@maryland.gov
410-767-0505 or 240-314-6171
www.Bio.Maryland.gov
The BioMaryland Center is the office within
Maryland’s Department of Business and
Economic Development that supports the
growth of the life sciences industry in Maryland.
The Center connects life sciences companies,
academic and federal researchers with each
other and with potential capital sources,
partners, and clients. Center staff provide
information regarding funding and other
resources, business plan feedback, access to
market research, advocacy, and other industry
support. The BioMaryland Center also
promotes the State’s life sciences industry
domestically and abroad.
Other exhibitors with BioMaryland:
Institute for Bioscience and
Biotechnology Research
https://www.ibbr.umd.edu
Mindoula
www.mindoula.com
PathSensors
www.pathsensors.com
CAI
(Commissioning Agents Inc.)
William Deckert
william.deckert@cagents.com
443-255-7889
CORPORATE SPONSOR
Commissioning Agents, Inc. provides
technical and consulting services to
improve the delivery, reliability, and
efficiency of your equipment, facilities,
and production operations. For
manufacturing start-up, smart
operations, asset maintenance and
reliability programs, energy use
optimization, and regulatory and process
consulting - we add value to your bottom
line.
CC Biotech LLC
Martha Knight
marthaknight@ccbiotech.us
240-669-9281
www.ccbiotech.us
cGMP Validation LLC
Roxane Lyons
roxane.lyons@cgmpvalidation.com
913-384-2221
www.cgmpvalidation.com
CC Biotech is manufacturing new
separation devices for large molecules
such as proteins and biopolymers. The
new Rotify will be exhibited that
fractionates proteins by gradient of
precipitation across a membrane. This
novel mechanism of separation can
accomplish dialysis in 75 min. Difficult
proteins can be purified out of complex
extracts.
Established June 1997, cGMP
Validation, L.L.C. is a full service
validation/compliance firm offering
validation and compliance services for
the pharmaceutical, biotechnology,
biologics, medical device, and medical
diagnostic industries. cGMP Validation
is staffed with a group of professionals
with considerable experience within the
pharmaceutical industries.
cGMP Validation is committed to
providing practical, excellent service to
our customers.
Charter Medical Ltd
Lexan Lhu
llhu@lydall.com
www.chartermedical.com
Charter Medical Ltd. focuses on
designing and supplying single-use
solutions for cell growth, frozen storage
and biological fluid handling.
Cleanseal A Division of ASI Doors, Inc.
Brian Fulton
cinfo@cleansealdoors.com
414-464-6200
www.cleansealdoors.com
ClorDiSys Solutions, Inc
Kevin Lorcheim
kevinlorcheim@clordisys.com
908-236-4100
www.clordisys.com
CRB
Jill Weiskopf
jill.weiskopf@crbusa.com
301-354-2468
www.crbusa.com
CORPORATE SPONSOR
Cleanseal Door Systems manufactures
a comprehensive line of swinging,
sliding, roll-up, fire rated and custom
doors for controlled environments. With
styles designed to meet requirements
ranging from GMP to Class 1, Cleanseal
provides complete door systems
including a full range of panel choice,
hardware selection, frame and
interlocking designs.
Clordisys Solutions, Inc is a worldwide
leader in contamination control with
solutions using chlorine dioxide gas and
ultraviolet light. Chlorine dioxide gas is
the safest and most effective method for
decontamination available today, while
UV light provides powerful disinfection.
ClorDiSys offers Decontamination /
Disinfection Equipment along with
providing Decontamination Services.
CRB is a global design, construction,
and consulting firm that relentlessly
pursues and delivers success for our
clients in advanced technology
industries. With 700+ professionals in 14
offices, CRB understands that not only
is each client unique, but the scale and
needs of each project are as well. This
is why our broad-based firm has been
strategically structured to offer a
comprehensive portfolio of services on
any project.
Dagard USA
Sean Marrie
smarrie@dagard.com
301-401-5652
www.dagard.com
CORPORATE SPONSOR
Dagard Modular Cleanrooms are
designed and manufactured to meet ISO
14644, whether it’s an ISO class 3 or
class 8, Dagard has the modular system
to meet each classification.
Dagard manufactures all of our own
Wall and Ceiling Panels as well as
Doors and Windows. We control our
manufacturing processes and do not
have to rely on outside companies to
manufacturer our products.
Dagard’s wide selection of exterior
(facings) and interior (core) materials
allows the owner and design firm to
‘customize’ each area of their cleanroom
to fit specific environmental
conditions. Core materials include:
Rockwool, Polyurethane and Aluminum
Honeycomb. Our facing materials
include powder coated steel, conductive
painted steel, uPVC, PET, Stainless
Steel (304 and 316) and high pressure
laminate (HPL). Dagard offers FM and
UL Approved Panels and Components.
Dibert Valve & Fitting Co., Inc.
Christopher Durand
chris.durand@swagelok.com
804-275-7871
Dibert Valve & Fitting., has
been the authorized supplier of
Swagelok® products and
services to Virginia industries since 1956.
We currently serve the Virginia, Maryland
& DC Metro areas with branches located
in Richmond and Norfolk, Virginia, and
Frederick, Maryland. Dibert provides
Swagelok® products and services to
various industries, including but not
limited to: Chemical Processing,
Biopharmaceutical, Power, Defense, and
Laboratory Research. In addition to
products, Dibert offers effective business
solutions such as Workforce
Development, Custom Solutions, and
Inventory Management.
Diversified Laboratory Repair
John Bergen
jbergen@dlrepair.com
301-519-2191
www.dlrepair.com
Eastern Controls, Inc.
Frank Murphy
frank.murphy@easterncontrols.com
410-321-7222
EMD Millipore Corporation
We are a laboratory equipment repair
and maintenance company located in
Gaithersburg. We offer 24/7 service as
well as loaner units at temperature. We
are GDP, GLP, and GMP compliant and
utilize NIST traceable instruments. I
look forward to this vendor show.
Eastern Controls, Inc. - Sanitary process
instrumentation and controls : valves,
flowmeters, pressure & temperature
transmitters, level, switches, steam
traps.
Manufacturing and sales of pure and
ultrapure water purification systems.
Patrick Somers
patrick.somers@emdmillipore.com
800-645-5476
www.emdmillipore.com
Evoqua Water Technologies
Brian Battani
brian.battani@evoqua.com
301-837-1415
www.evoqua.com
Evoqua Water Technologies is a leader
in water and wastewater treatment
products, systems and services for
industrial and municipal customers. We
offer a wide range of proven product
brands and advanced water and
wastewater treatment technologies,
mobile and emergency water supply
solutions and service contract options.
GF Piping Systems
Brendan Dowd
brendan.dowd@georgfischer.com
714-368-4212
www.gfps.com/us
Harrington Pure - SED North
America
Doug Reed
dreed@sed4valves.com
866-589-2768
www.harringtonpure.com
Hydro Service and Supplies
Ben Skowronski
ben@hydroservice.com
919-452-6136
www.hydroservice.com.
EVENT SPONSOR
CORPORATE SPONSOR
GF Piping Systems is a leading provider of
high quality piping systems products, offering
specific system solutions in a wide range of
industries. Our components for the
conveyance, measurement, and control of
liquids are always an integral part of complete
solutions. Specific products include plastic pipe
and fittings, valves, actuators, rotameters,
fabrications, fusion joining technology
(machines), heat exchangers, secondary
containment, flow monitoring and process
control instrumentation.
Harrington Pure, a division of Harrington
Industrial Plastics, offers SED Flow
Control Aseptic Diaphragm Valves, tube,
fittings, hangers, heat exchangers, hose
assemblies and additional industry
compliant quality products for the
BioPharm Markets. Harrington Pure has
unparalleled service and expertise with
a team of BioPharm specialists and a
knowledgeable sales staff in over 50
branch locations.
Hydro Service and Supplies, Inc.
provides a versatile range of quality
ultrapure water systems and products,
from large scale central production
systems to point-of-use laboratory
systems. Since 1967, Hydro has been
an industry leader by combining
synergistic engineering and innovative
designs with high-performance
component selections, superior
materials of construction, and precision
manufacturing that result in high quality
ultrapure water systems.
Intellitech, Inc.
Andy Biller
abiller@intellitech-inc.com
410-876-1229
www.intellitech-inc.com
Irvine Scientific
Danielle Rice
drice@irvinesci.com
301-250-5439
www.irvinesci.com
Intellitech, Inc. provides precision liquid
fill/finish systems; including i-FILL®
dispensing pumps with unmatched
repeatable accuracy and single-use fluid
path, i-CAP® closure modules for crimp,
screw cap or insertion and intelliFLEX®
wash-down conveyors. We also provide
custom, single-use kits to meet
production needs in regulated filling
environments featuring Oetiker® clamps
that significantly improve tubing set pull
strength and seal.
Irvine Scientific is a worldwide leader in
the innovation and manufacture of cell
culture media, reagents and medical
devices for researchers and clinicians.
The company provides unrivalled
service and quality to scientists working
in cell therapy & regenerative medicine,
assisted reproductive technology &
cytogenetics, and industrial cell culture
for the large-scale production of
biotherapeutics and vaccines. We
adhere to both ISO & FDA regulations
with cGMP manufacturing in the US and
Japan.
JacobsWyper Architects
Jennifer Bielecki
jib@jacobswyper.com
215-985-0400
www.jacobswyper.com
Kinetic Systems, Inc.
Greg Bauer
greg.bauer@kinetics.net
510-378-9739
www.kinetics.net
Jacobs/Wyper Architects is an
architectural design firm that services
the pharmaceutical, biopharmaceutical
and medical device industries. Located
in Philadelphia, Pennsylvania, Jacobs/
Wyper provides planning, design and
interior design services throughout North
America. Recently completed projects
have included manufacturing and
laboratory facilities in several overseas
locations including South Korea and
Saudi Arabia.
With more than 40 years of experience,
Kinetics is a Leading Global Process
and Mechanical Systems contractor
providing process and mechanical
solutions to the BioPharm Industry. We
apply our well-developed capabilities to
support critical process facility design
and construction. Our technical teams of
engineers, designers, CAD specialists
and support technicians provide building
and system designs that maximize
efficiency and meet client project
requirements relative to safety,
schedule, and costs. Kinetics’ seasoned
Project Execution teams enable us to
finish projects on time and within
budget.
Our regional offices, located in key
technology centers around the globe,
provide fast and effective support.
Kinetics can design-build, fabricate and
install precise piping and process
systems for: Purified water systems
(WFI, USP, RO/DI), Pure steam,
Process gases, Waste Water Systems,
Fermentors and Bio-Reactors,
Buffer & Media preparation/storage
systems, Clean-in-place (CIP) &
Sterilize-in-place (SIP) systems. To
learn more visit our website at
www.kinetics.net
Lonza
Wendy Wilcox
wendy.wilcox@lonza.com
301-605-2085
www.lonza.com
M. Davis
Mike Kerwien
mike.kerwien@mdavisinc.com
302-993-3303
www.mdavisinc.com
Meridian BioGroup LLC
Thomas Blake
tblake@meridianbiogroup.com
301-360-9771
Alison Demarest
ademarest@meridianbiogroup.com
www.meridianbiogroup.com
Lonza offers a broad range of services
to support drug discovery research
processes including custom cell
isolation, expansion and transfection
services, and assay ready primary cells.
These tools enable researchers to
perform drug discovery research using
biologically relevant tools to generate
decision driving data quickly.
Additionally, Lonza has been providing
endotoxin detection products and
services for more than 25 years, leading
the way in innovation for products,
methods and software.
M. Davis is a full service mechanical /
electrical contractor and fabricator.
Services include mechanical & piping
installations, ASME orbital welding on
sanitary systems, rigging, structural
steel, electrical and control panel design
& fabrication. M. Davis has a dedicated
non-ferrous shop for modular process
systems, tanks and miscellaneous
fabricated items.
Meridian BioGroup LLC is a validation
and compliance contract service
provider to the biotechnology and
pharmaceutical communities.
Meridian’s services include validation of
utility systems, process equipment,
manufacturing processes, and analytical
methods; development of quality
systems; quality audits and gap
analyses; validation master plan
development; training; and other
necessary components of GXPcompliant operations.
Mesa Monitoring
Scott Saveleski
ssaveleski@mesalabs.com
443-610-4218
www.mesalabs.com
Mount St. Mary's University
Matthew Rittler
rittler@msmary.edu
540-250-2112
Neu-Ion, Inc.
Lee Heikkinen
laheikkinen@neu-ion.com
410-944-5200
www.neu-ion.com
CORPORATE SPONSOR
Mesa Monitoring offers a complete
solution for your monitoring needs.
Saving time and money, eliminating
errors, and protecting your facility from
costly product loss, Mesa Monitoring’s
continuous monitoring solutions help to
keep your facility compliant with FDA,
AABB, CAP, DHS, and other regulatory
agencies by offering a centralized
monitoring & alarm system that monitors
your units, sends alarm notification, &
much more.
Mount St. Mary’s University Frederick
campus is home to graduate evening
classes. The Mount is the only institution
in the area to feature degree and
certificate programs--including a master
of science degree in biotechnology and
management (MSB). Classes are
designed for working adult students–
Earn more credits than in a traditional
semester, at a time that is more
convenient for you!
Neu-Ion Inc. has enjoyed designing,
engineering, furnishing, installing and
maintaining high purity water systems that
are used for research and development
and/or manufacturing purposes over the
last 24 years. Neu-Ion Inc. has the
capability to service and maintain
competitive systems/equipment, such as
water softening systems, reverse osmosis
and deionization equipment. From the
small, single point of use water system to
the large building centralized system, we
are able to supply both new systems and
service existing systems by virtue of our
tremendous parts inventory, an extensive
knowledge of high purity water equipment,
and a terrific crew of responsive, cross
trained technicians.
New England Lab
Sybil McDowell
smcdowell@newenglandlab.com
781-503-8909
www.newenglandlab.com
Novavax
Matt DePola
mdepola@novavax.com
240-268-2000
New England Lab was established in
1990 as a laboratory furniture specialist
who from beginning to end works with
you to plan, build, and install your new
lab on time, on spec and on budget.
Taking the time to understand our
customer’s requirements, vision and
budget allows us to provide the
necessary support throughout the life of
the project. Our commitment to labtested quality spans our full product line
of fixed casework, adaptable furniture
systems and fume hoods, as well as the
accessories you need to complete your
fit out. We understand what matters to
you, take pride in our craft and products,
and deliver service that makes your new
lab right.
Novavax, Inc. (Nasdaq: NVAX) is a
clinical-stage biopharmaceutical
company creating recombinant protein
nanoparticle vaccines to address a
broad range of infectious diseases.
www.Novavax.com
Panasonic Healthcare
John Bergen
John.bergen@phcna.panasonic.com
630-595-7028
us.panasonic-healthcare.com
For over forty years, Panasonic
Healthcare has combined ideas and
innovations from our worldwide network
of industrial and consumer products into
a complete line of biomedical laboratory
products. We offer the industry’s most
sophisticated refrigeration compressor
design and state-of-the-art electronics,
ultra-low and cryogenic freezers,
refrigerators, incubators and
environmental chambers.
PCI
Chris Barrow
cbarrow@pci-llc.com
919-208-5296
www.pci-llc.com
Philip R. Walker & Assoc., Inc.
Steve Walker
steve.walker@prwalker.com
410-666-2142
www.prwalker.com
POMS Corporation
Darrell Tanner
darrell.tanner@poms.com
404-386-9279
www.poms.com
PCI offers a comprehensive selection of
quality services which include
Calibration & Maintenance Consulting,
Process and Analytical Equipment
Calibrations, Laboratory Asset
Management, Equipment and
Instrument Commissioning and ISO
17025 Metrology and Pipette
Laboratories.
• Qualification and mapping services
• Computerized Calibration Management
Systems.
Philip R. Walker & Assoc., Inc. sells and
services measuring instrumentation for
the Life Sciences Industry, including
Optical Analyzers, NIR Process
Systems, Flowmeters, Level, Pressure,
and Temperature Meausrment
Instruments.
POMS Corporation offers 100% web
based, paperless Manufacturing
Execution System (MES) solutions for
the Life Sciences, Fine Chemicals,
Consumer Packaged Goods, and other
Regulated Industries to meet regulatory
requirements while reducing risk,
lowering costs, improving efficiency and
speed to market. A critical piece of the
solution is the people who design,
manage, implement, and service these
projects. The POMS operations staff
has over 25 years of experience in
Manufacturing Execution Systems and
will match POMS products with your
requirements to provide you with an
economical best-in-class solution.
ProPharma Group
Ted Shoneck
ted.shoneck@propharmagroup.com
888-242-0559
www.ProPharmaGroup.com
CORPORATE SPONSOR
Paul Mueller Co.
Bill Hons
bhons@paulmueller.com
417-872-9691
www.muel.com/ProductDivisions/
BioPharm_Systems/
Qualification Process
Solutions - QPS
Glenn Paisley
gpaisley@qpsllc.com
301-467-2483
www.qpsllc.com
CORPORATE SPONSOR
ProPharma Group is an industry leader
serving the compliance needs of the
pharmaceutical, biotechnology, and
medical device industries. Our experts
bring comprehensive compliance
solutions to clients, helping to improve
their operations in a complex and
changing regulatory environment.
Services include Compliance, Quality
Assurance, Commissioning and
Qualification, and all validation
disciplines.
Offering a full range of Biopharm
Vessels, including portable and "smart"
tanks, Process Skids, Custom
Bioreactor/Fermentation Systems,
PyroPure Steam Generators and
Multiple-Effect Stills, WFI Distribution
Systems, Modular Process Systems,
Field Construction, Plant Maintenance
and Repair, and complete Turnkey
Project Execution.
QPS provides process engineering and
custom equipment design and
fabrications services. QPS specializes in
process utility systems and offers a
standard product line of skid mounted
systems, including Purified Water
systems, Water for Injection systems,
Pure Steam Generators, Biowaste
systems, CIP and SIP systems. QPS
provides on-site piping installations in
high purity plastic and stainless steel in
accordance with ASME BPE and GMP
requirements. QPS provides equipment
rebuild and reconditioning services for
existing and used equipment. QPS is an
authorized Allen Bradley reseller and
custom controls integrator.
Roberts Oxygen Co, Inc.
Tom Peacor
tpeacor@robertsoxygen.com
301-948-2205
RURO, Inc.
Larry Miller
sales@ruro.com
1-888-881-RURO
www.RURO.com
Since our founding in 1966 as a local
distributor of compressed medical and
specialty gases, cryogenic gases and
equipment. Roberts Oxygen is
recognized as the finest service oriented
independent distributor from
Pennsylvania to Florida with 44
locations, serving 9 states.
RURO, Inc. brings our partners the most
modern solutions for their
information management needs. RURO
systems decrease staff time
requirements for data entry, compilation
and reporting by an average of a third,
and reduce user input errors by up to
97%.
EVENT SPONSOR
For sample management, LIMS or ELN,
RURO is Laboratory Information Bliss.
Sani-Matic
Kristin Larson
kristin.larson@sanimatic.com
800-356-3300
www.santimatic.com
Madison, WI-based Sani-Matic is known
worldwide for its sanitary process
cleaning equipment serving the
pharmaceutical, biotech, personal care,
food and beverage industries. The
company has designed and
manufactured equipment that provides
Cleaning Confidence since 1943. SaniMatic’s top products for the
pharmaceutical and biotech industries
include the UltraFlow 45 and 110 CleanIn-Place (CIP) Systems, TactiWash, IBC
Wash, PharmiCab, Immersion Parts
Washer, Tablet Wash and Tunnel Wash.
Sentinel Process Systems
Paul Tramo
ptramo@sentinelprocess.com
844-345-FLOW
www.sentinelprocess.com
Shickel Corporation
Don Crawford
donc@shickel.com
540-828-2536
www.shickel.com
CORPORATE SPONSOR
Siemens Industry Inc
Gary McKelvey
gary.mckelvey@siemens.com
410-645-1536
www.usa.siemens.com
Sentinel Process Systems provides
advanced technologies for the cGMP
BioPharm market. We supply BioPharm
valves, and fittings; Silicone and TPE
tubing, BioBags and custom “single use”
assemblies; Sentinel also fabricates
silicone and PTFE hose assemblies in
house. With over 60 years of
experience we know the importance of
customer service and support. Our
engineers and experienced customer
service people are ready to assist you
and your staff. Sentinel – delivering
quality and technology – everyday.
Shickel engineers design and our
craftsmen fabricate and install custom
fabricated stainless products for
pharmaceutical, biopharmaceutical
industries. Some of the products we
make are cabinets, carts, chutes,
crossovers, bump rails, gowning
stations, enclosures, hoppers, lift carts,
mezzanines, clean room trim-out, stairs,
sinks, tanks, tubs, wash racks, window
frames or workstations. For examples of
our work visit www.shickel.com.
Siemens’ understands your facility
compliance and unique environment
needs. Our expertise in critical
manufacturing and laboratory operations
has been proven through-out North
America and the Baltimore Washington
DC region. We provide a comprehensive
building solutions program for design,
installation, qualification and
maintenance of building with or without
cGMP and biocontainment needs. For
help we these services and solution
Siemens has local factory branch offices
in Baltimore, MD, Beltsville, MD and
Chantilly VA.
Simtech USA
Joseph Webb
jwebb@simtechusa.com
1-215-547-0444
www.SimtechUSA.com
SPS CleanTech, LLC
Paul Tramo
ptramo@sentinelprocess.com
844-899-4GMP
www.spscleantech.com
Stainless Fabrication, Inc.
Bill Stovall
bill.stovall@stainlessfab.com
417-865-5696
www.stainlessfab.com
Simtech is manufacturer and industryleading provider of thermoplastic products and systems use in control, containmentment and transport of corrosive
fluids, corrosive fumes, and high-purity
water. We have a diverse customer
base in the Pharmicutical, Bio-Tech,
semi-con, Watse water, Life sciences
and OEM markets. Visit our website at
www.simtechusa.com.
SPS CleanTech offers products and
technologies used in the renovation,
upgrading, and construction of
cleanrooms or classified spaces within
the GMP and Clean Industrial
markets. We offer Nora’s GMP
replacement flooring solution, Dortek’s
high performance FRP door systems,
Kenall’s high efficiency, T-8 Fluorescent
replacement LED lighting for Sealed
lighting enclosures, Takiron’s FM4882
approved, GMP wall solutions, as well
as Puracore modular wall systems. We
are dedicated to significantly enhancing
and lowering the cost of operations of
our clients.
Custom designed & fabricated stainless
steel pressure vessels, mixers, storage
tanks, reactors, and processing
equipment for most industries/
applications. ASME certified. Tank
capacities from one to approx. 60,000
gallons are built in our shop while tanks
in excess of 600,000 gallons are
fabricated on-site. Single wall or
jacketed. Mill, high polish, and
electropolish finishes. FAT services &
TOP available. Also on-site inspections,
repairs, & modifications of existing
tanks. Since 1985.
STERIS Life Science
David Knauer
david_knauer@steris.com
267-307-4567
www.steris.com
TAI Engineering
STERIS is a global leader in
sterilization/contamination control
solutions to the life science industry.
Our technologies include Capital
Equipment Solutions [steam sterilizers,
part washers, pure steam generators,
multiple effect WFI stills, and vaporized
hydrogen peroxide systems (VHP)], as
well as a full line of related Formulated
Chemistries/Consumables, and Field
Service.
Engineers, Managers & Technical
Services
John Birkmire
jbirkmire@taiengineering.com
410-413-1739
www.taiengineering.com
CORPORATE SPONSOR
Tech USA
William Neutzling
wneutzling@techusa.net
443-274-3489
www.techusa.net
Tech USA, Scientific Solutions is a
comprehensive provider of staffing and
recruiting solutions throughout the
Scientific Industry. The nation’s leading
institutions rely on Tech USA to provide
them with the best and brightest talent.
We support a variety of industries,
including Pharmaceutical,
Biotechnology, Biodefense, Clinical
Research, Health Care, Universities,
Federal Agencies and Environmental,
Chemical and Food Sciences.
The Whiting-Turner
Contracting Company
Erin Pfeffer
erin.pfeffer@whiting-turner.com
410-821-1100
www.whiting-turner.com
CORPORATE SPONSOR
Crate Hall
crate.hall@4tpe.com
252-246-1089
www.4tpe.com
UMCP Biological Sciences
Ben Woodard
woodard@umd.edu
301-405-3909
Whiting-Turner provides comprehensive
construction services for biotechnology,
vivarium, biocontainment, R&D,
pharmaceutical and nanotechnology
facilities nationwide. With over 100
years of industry experience, WhitingTurner applies an understanding of the
operational needs of building users to
constructing facilities that meet current
and future research needs.
Triangle Process Equipment is
dedicated to becoming the industry’s goto resource. We align with trusted
manufacturers to obtain an in-depth
working knowledge of their industrial
processing products. This foundation of
experience drives our product
knowledge and ensures we deliver value
through educated equipment
recommendation. Immersed in the
processing equipment industry, we have
a thorough understanding of the
nuances of processing markets. By
operating with a sales and service
approach driven by problem-solving,
Triangle Process Equipment delivers
specialized solutions to the unique
needs of processing equipment
customers.
The Biotech Research and Education
Program (BREP) at the University of
Maryland is the regions premier
biotechnology, biopharmaceutical and
biofuel research center providing
supplemental contract research to
academia, government and industry.
The program specializes in bacterial and
yeast fermentations (up to 250L) and
anchorage dependent and suspension
cell cultures up to 4 x 10L.
Vaisala Inc
John Martin
john.martin@vaisala.com
781-933-4500
www.vaisala.com
Vigilant Bioservices
Jeff Lange
jlange@vigilantbioservices.com
410-852-5267
www.vigilantbioservices.com
Worldwide Life Sciences
Faten Deeb
fdeeb@wwmponline.com
443-690-7018
Vaisala provides high-performance
monitoring, measurement and validation
systems for regulated and GxP
environments. With fail-safe monitoring
and alarming of humidity, temperature,
CO2, differential pressure and more,
Vaisala provides the most reliable
solutions and support worldwide.
Vaisala’s Continuous Monitoring
Systems deliver gap-free data and
industry-best accuracy.
Vigilant Bioservices is a complete
source for secure GMP storage of
biologic/tissue/pharmaceutical
materials. The Vigilant facility is
designed to the highest standards,
contains multiple redundancy systems,
and is fully validated to meet regulatory
guidelines. From archive samples/
retains to stability storage and finished
goods distribution, our experienced staff
can provide customized sample/tissue
storage and cold chain solutions to meet
your specific needs.
WorldWide Life Sciences is a member of
the Genesis Biotechnology Group. Our
sister companies do research on
infectious disease, cancer and drug
screening, among others. We
manufacture and distribute high fidelity
laboratory supplies.
ISPE - Chesapeake Bay Area Chapter Board of Directors:
Meet your ISPE Board Members. Feel free to find us throughout the show.
Officers:
Jason Rifkin,
Chapter
President
Nate Roman,
Chapter Vice
President
Rad Farenwald,
Chapter
Secretary
Michael Molloy,
Treasurer & Past
President
Jason Rifkin is the President of Equilibrium and oversees Program Management and DesignBuild projects for life science facilities. Jason has worked in the life science industry for over 20
years and brings extensive experience in the biotechnology and life science sector previously
working for Celera Genomics and NeuralStem. Jason has worked with Turner Construction
Company as a life sciences construction market consultant and for Scheer Partners as a Senior
Vice President in charge of Development and Construction of Life Science facilities.
Jason holds a Bachelors of Science in Biology from the University of Maryland at Baltimore
County, a Masters of Science in Developmental Neurobiology from Montana State University,
and a Masters of Business Administration from the University of Baltimore. Jason has also
published articles in peer reviewed scientific journals and presented at scientific and facility
related conferences.
Nate Roman is a General Manager and Partner at Azzur Group. He has been with Azzur Group
for 7 years. Azzur Group is a full service company providing a variety of compliance services to
the Life Sciences Industry. He has over fourteen (14) years of versatile experience in the
pharmaceutical and biotechnology manufacturing industry. Starting as an AutoCAD draftsman in
the Engineering industry and working his way up through the ranks of validation specialist to
Project Lead in the Pharmaceutical industry.
Nate has been an active member for 8 years and served as board member, social committee
lead and currently Vice President of the Chesapeake Bay Chapter.
Rad Farenwald is Engineering and Facilities Manager for Aeras. Aeras is a non-profit product
development organization focused on the development of effective tuberculosis (TB) vaccines
as well as a CMO vaccine manufacturer. His previous life science experience includes Facilities
Manager and Senior Project Engineer at Lonza/Cambrex, and a Senior Engineer for Life
Technologies/Invitrogen. Previous to the life science industry, Rad’s experience includes
various engineering and management positions at Tyco/AMP Inc. and engineering assignments
at Fiat/Ford/Sperry New Holland.
Rad has been with a member of the ISPE Chesapeake Bay Chapter since 2003, serving as a
BOD external advisor and currently as chapter Secretary. Rad has previous affiliations with AIIE
and SME associations. He has a B.S. Industrial Engineering from Lehigh University.
Michael Molloy, PE is a Principal at Qualification Process Solutions, LLC (QPS,LLC). As a
licensed engineer, he provides process engineering, project management, and consulting
expertise for critical utility and process systems for his firms biotech and pharmaceutical
clients. Previously, he worked as Director of Engineering for a multi-product CMO responsible for
facility modifications and improvements and in a technical role for product tech transfers and scale
up. He holds a degree in Mechanical Engineering from the University of Maryland and an MBA
from the University of Baltimore. Mike has been an ISPE member for over 15 years. In addition to
his current local leadership role, he is an active volunteer in ISPE at the international level. He
teaches recurring courses on GMP water and steam systems for local universities and trade
association events.
Directors:
Don Crawford
(Shickel Corporation)
Marketing Committee Chair
Ben Skowronski
(Hydro Service & Supplies)
Vendor Committee Chair
Sean Marrie
(Dagard)
Social Committee Chair
Lynda Duffy
ISPE - Chesapeake Bay Area
Chapter Manager
Come Tee off with us!
Sponsorships:
Hole Sponsorship:
$300
Signage at one of the hole.
Breakfast:
$1800
Premier signage and recognition on all marketing materials
Lunch:
$2800
Beverage Cart:
$2500
Schedule:
8:00 AM
9:30 AM
After Golf
Registration and Breakfast
Shotgun Start
Lunch, Awards, Raffle Prizes
Thank you for attending the show!
Founded in 2010, the BioBuzz mission is to bring the region together by
stimulating a more active bio workforce, and a more dynamic bio industry
throughout Maryland, DC, Virginia and beyond. BioBuzz is a social community
group built for, and by the employees, students and businesses in the bio
industry. The BioBuzz events bring together professionals in a casual setting
where attendees can network and build relationships, discuss current events,
learn about local companies, start new partnerships and above all have a good
time.
Through BioBuzz.net and free monthly events, BioBuzz strives to bring together
the local community where people can unwind and network at the same time. Got
an idea for an event or want to get involved? Send a message and let them know
how you too want to get involved and continue to spread the Buzz.
Sponsors include MedImmune, Johns Hopkins University Montgomery County,
WeWorkForHealth Maryland, BioHealth Innovation, Inc., CRB, TechUSA,
BioMaryland, and PressComm Public Relations.
Connect with BioBuzz on Twitter, Facebook, and LinkedIn.
ISPE, the International Society for Pharmaceutical Engineering, is the world's
largest not-for-profit association serving its Members by leading scientific,
technical and regulatory advancement throughout the entire pharmaceutical
lifecycle.
ISPE is committed to the advancement of the educational and technical
efficiency of its members through forums for the exchange of ideas and
practical experience.
Stay involved with our local chapter on LinkedIn or through the website,
www.ispe-cba.org.
ISPE Chesapeake Bay Area Chapter
PO Box 799, Clarksville, Maryland 21029 ~ Fax: 443-283-4064 www.ispe-cba.org
Contact us: chesapeakebayispe@ispe-cba.org

Mid-Atlantic Life Sciences Showcase

Transcription

Similar documents

Online Casino Games Mega Jack

here - Cosmetics Beauty Hair

Travel Cruise 2013

Untitled - Chicago Drum Show

- New Designers

Curriculum Vitae - DamonArmani.com

ISPA EXPO Exhibitor Directory

Untitled

You deserve an advantage

ExhibitorPre-Show Sponsorship Program