plagat_xm18 RTR.ai

1
/10 LUXURY TOURING CAR
TECHNOLOGY
XRAY sets new standards for chassis and car set-up and adjustment
Using one chassis and one top deck, you can set up and adjust the new XRAY T2 for almost all different racing
conditions. Whether you are driving on asphalt or carpet, using rubber or foam tires, thanks to MFT™ you
can get the most out of your T2 without changing to different chassis plates or top decks.
With MFT™ you can easily adjust your T2 to three different flex characteristics soft, medium, and stiff - or anywhere in between to best suit your track conditions.
NO ALU STANDS
NO ALU STANDS
NO ALU STANDS
NO ALU STANDS
NO ALU BRACE
NO ALU STANDS
NO ALU STANDS
screw not used
NO ALU STANDS
www.teamxray.com
NO ALU STANDS
screw used
Martin Hudy
Jilles Groskamp
1
/10 LUXURY TOURING CAR
• brand new T2 platform • completely re-designed & re-engineered • all-new enhanced suspension geometry • completely new lightweight, strong, and durable suspension •
suspension arms for both rubber & foam tires • XRAY Quick Roll-Centers™ • Hudy Spring Steel™ CVD driveshafts • new ultra-lightweight front/ rear split Swiss 7075 T6 aluminum
bulkheads • lightweight hollow aluminum middle layshaft • thicker 6mm body posts • front/rear top deck aluminum posts • aluminum rear brace for maximum rigidity • lower
suspension alu holders with 3 different roll center positions • lowest CG ever • 7075 T6 aluminum wheel hubs • shortened XRAY 4-step externally adjustable shocks for improved
suspension travel • new front/rear shock towers with optimized shock positions for rubber and foam tires • new XRAY shock springs • stylish HUDY Starburst Wheels included
“When you evolve a platform to the point where it reaches its maximum potential it is time
for a radical change. It is time to get back to roots and start from scratch to build a brand
new platform. XRAY presents the all-new XRAY T2. Designed to redefine touring cars.
Engineered to win.”
See it. Feel it. Drive it.
Dipl. Eng. Hudy Juraj, chief designer, XRAY
1
/10 LUXURY TOURING CAR
• famous XRAY Multi-Diff™: one-way / one-way solid / full time solid axle (not included in US kits) • externally adjustable, fully-assembled and specially lightened hardcoated
aluminum rear ball differential with carbide balls and carbide axial thrustbearing • complete set of high-speed blue-sealed ball-bearings, degreased, lightly oiled for maximum
efficiency, individually controlled, selected and inspected • fully-adjustable front and rear suspension geometry: caster, camber, inboard/outboard toe, front dive, rear squat, ride
height, downstops, track-width, roll center, wheelbase, Ackermann • Hudy Spring Steel™ turnbuckles • high-performance Kevlar-reinforced drive belts • new front foam bumper
HIGH PERFORMANCE PARTS INCLUDED
lightweight aircraft aluminum
hollow main layshaft
duraluminum adjustable Ball Diff.
with Labyrinth Dust Covers™
adjustable Hudy Spring Steel™
turnbuckles (steering, front & rear upper links)
high-speed blue
covered ball-bearings
XRAY Multi-Diff™
XRAY Multi-Diff™
Unique, revolutionary front XRAY Multi-Diff™ enables 3 different easy settings:
• one-way
• one-way solid
• full time solid axle
Notice: Not included in US kits. All US kits come with two ball-differentials.
all-new suspension parts provides all-new improved and
optimized suspension geometry for maximum performance
world's lightest most durable driveshafts
hand made from famous Hudy Spring Steel™
XRAY DRIVE TRAIN CONCEPT
World’s Most Efficient Drive Train
Over the years, since the first T1 platform, XRAY has not succumbed to either the shaft drive or
single-belt drive train "fashions," and has kept ongoing development to bring the dual-belt drive train
system to maximum, high-performance perfection. Over the years this has been proven to be the best
drive train system, now followed by most other manufacturers. The drive train of the XRAY T1FK'05 was
proven to be the world's most efficient drive train, and so has been carried over to the all-new T2
platform. The super-efficient dual-belt drive train features oversized pulleys with optimized 1.7 internal
ratio. Both front and rear low-friction narrow 3mm belts run on large 34 tooth diff pulleys and large
20T middle shaft pulleys for best belt wrapping and maximum drive train efficiency and smoothness.
XRAY AUTHENTIC OPTION PARTS
Composite C-hub Block
#302343 - 2° right, #302344 - 2° left
#302345 - 4° right, #302346 - 4° left
#302347 - 6° right, #302348 - 6° left
#306163
Graphite Battery Strap
with Alu Stands
#302256
Alu Steering Block L/R
Including Composite Bushings
and Ball Bearings
#303060
Graphite Motor Guard
Alu C-hub Block
#302334 - 0° right
#302335 - 2° right
#302337 - 4° right
#302339 - 6° right
#305716~34
Pinion Gear Alu
Hard Coated 48pitch
16T to 34T
super-soft 14lb
soft 17.5lb
soft-medium 22.5lb
medium 28lb
medium-hard 33lb
hard 38lb
(#30 8393) 1.4 (#30 8394) 1.5 (#30 8395) 1.6 (#30 8396) 1.7 (#30 8397) 1.8 (#30 8398) 1.9
#30 8390 Xray Selected Ultimate Racing Springs (24)
XRAY EUROPE
P.O.Box 103, 911 50 Trenčín
Slovakia, Europe
Phone: +421 32 7440180
info@teamxray.com
#301203
Impact Absorbing Bumper
#305784~99
Spur Gear 1/48"
84T to 99T
15lb
(#30 8384)
1.5
Alu Rear Upright
#303358 - 1° outboard toe L+R
#303359 - 2° outboard toe L+R
Including Composite Bushings
and Ball Bearings
#302334 - 0° left
#302336 - 2° left
#302338 - 4° left
#302340 - 6° left
20lb
(#30 8385)
1.6
25lb
(#30 8386)
1.7
30lb
(#30 8387)
1.8
35lb
(#30 8388)
#30 8380 Additional Xray Ultimate Racing Springs (20)
XRAY USA
RC America,167 Turtle Creek
Boulevard Suite C, Dallas, Texas 75207
Phone: (800) 519-7221 * (214) 744-2400
xray@rcamerica.com
#309820
Balancing Weights
Front
1.9
#305352
Alu Wheel Hub +1mm Offset
#309830
Balancing Weights
Rear
#309520~50
Silicone Oil 20W - 50W
#309580
One-Way
Lube 25ml
Anti-Roll Bar Set
1.2, 1.4, 1.6mm
#302401 - front
#303401 - rear
#309850
Balancing Weights
Central
#309500
Silicone Grease 00
1/18 MICRO NITRO CAR 4WD
I T ’ S
M I C R O ,
I T ’ S
N I T R O ,
I T ’ S
1/18 MICRO NITRO CAR 4WD
www.teamxray.com
LUXURY 1/18 4WD NITRO MICRO CAR
• high performance micro car • 1/18 scale • 4WD shaft-drive • powerful 0.8cc nitro engine • uses standard model car fuel • accepts standard electronics • super fast (50+ km/h)
• easy to handle • CNC-machined aluminum engine mounts • aluminum slide carburetor • aluminum flywheel • HUDY steel clutch bell 23T • CNC-machined alu clutch shoes
• polished muffler • 30cc fuel tank w/ hypertonic lid & internal stone-type filter • silicone fuel tubing • Swiss T6 7075 CNC-machined chassis • 1-piece moulded radioplate
"I have been a diehard nitro fan since my teenage years. When we designed XRAY M18,
the micro 1/18 car, in the back of my mind I had an idea of creating something new,
something revolutionary, something avant-garde --a nitro powered 1/18 touring micro car.
I have now made my dream come true."
--- Dipl. Eng. Juraj Hudy, chief designer, XRAY
LUXURY 1/18 4WD NITRO MICRO CAR
●
●
●
high-resilience foam bumper 22 high-speed ball-bearings adjustable brake laser cut, hand-ground steel brake disk ● Ferodo brake pads ● gear differentials
aluminum main drive shaft ● low CG ● fully independent suspension ● 12° pre-set front caster ● adjustable shock positions ● adjustable downstops ● coil-over shocks
adjustable front & rear toe-in (optional) ● Hudy Spring SteelTM steering rod ● rugged servo saver ● pre-mounted foam tires for maximum stability ● 1/18 body included
●
●
●
Laser cut hand-ground steel brake disk provides
adjustable precise four wheel braking
One piece moulded radio tray allows
easy quick access to radio equipment
Fully independent suspension front & rear
for precise and responsive handling
After market Micro Start box
from HUDY
for easy
& quick
start-up
Complete set of 22 ball-bearings
for maximum drivetrain efficiency
Easy access to rear linkage allows
quick adjustments for fine tuning
• uses standard model car fuel
• standard glow-plug design
• durable construction
• large, billet blue anodized aluminum heatsink
• slide adjustable carburator
• dual needle aluminum carburator
• 2 shoe aluminum clutch
• T6 aluminum flywheel
• polished muffler
• HUDY steel 23T clutch bell
c
0.8c
1/18 micro body included
30cc racing style fuel tank
MADE IN JAPAN
© 2005 XRAY
#38 0200 - NT18 KIT + ENGINE + MUFFLER
#38 0291- NT18 KIT + ENGINE + MUFFLER + ELECTRIC PACK (2x METAL GEAR SERVO, RECEIVER BATTERY PACK)
XRAY NT18 OPTIONS
Rear Foam Tires Mounted
#389535 - Soft
#389533 - Medium
Front Foam Tires Mounted
#389530 - Hard
#389532 - Medium
Rubber Tires + Inserts
Front (Hardness 50Deg )
#389635
Rear Body Post Holder
#381342
Graphite - Silver
Rubber Tires + Inserts
Rear (Hardness 35Deg )
#389650
Alu Suspension Block Left
#381341
Graphite - Blue
NOT INCLUDED
#381345
Graphite - Black
RECEIVER
LEXAN PAINT
FUEL
GLOW PLUG HEATER
STARTER BOX
#382106
Front One-way Differential
Alu Drive Shaft - Set (2)
HUDY Steel Clutch Bell
#382262
#385001
#385101
#385201
#388518 - 18T, #388521 - 21T
#388523 - 23T, #388525 - 25T
INCLUDED IN KIT #380291
MICRO SERVOS
#383300
#389640
Set of Suspension Arms 6° Caster (2)
Adjustable Ball Differential
RX
TRANSMITTER
Adjustable Turnbuckle Set
for Toe-in Adjustment
Alu Suspension Block Right
#382252
MUST BE PURCHASED SEPARATELY TO OPERATE THE MODEL.
Rubber Tires + Inserts
Front+Rear (Hardness 40Deg )
RECEIVER BATTERY
Prototype pictures shown, final products may vary slightly. All specifications are subject to change without prior notice. All rights reserved.
XRAY EUROPE
P.O.Box 103, 911 50 Trenčín
Slovakia, Europe
Phone: +421 32 7440180
info@teamxray.com
XRAY USA
RC America,167 Turtle Creek
Boulevard Suite C, Dallas, Texas 75207
Phone: (800) 519-7221 * (214) 744-2400
xray@rcamerica.com
1/18 MICRO NITRO TRUCK 4WD
I T ’ S
M I C R O ,
I T ’ S
N I T R O ,
I T ’ S
1/18 MICRO NITRO TRUCK 4WD
www.teamxray.com
“I am extremely proud that XRAY has proved once again to be the innovation
and design leader in RC world, creating new revolutionary ideas, and setting
new trends and standards by introducing the world's first micro nitro
on-road car - the XRAY NT18. The heritage of XRAY excellence continues
as we proudly present the world's first micro nitro off-road truck - the XRAY NT18T.”
History begins now. A legend engineered. Undeniably XRAY.
Dipl. Eng. Juraj Hudy
Chief Designer, XRAY
LUXURY 1/18 MICRO NITRO TRUCK
high-efficiency drive train featuring 26 high-speed ball-bearings ● ball bearings degreased and lightly oiled for maximum speed ● adjustable brake ● laser cut,
hand-ground steel brake disk ● Ferodo brake pads for strong, fade-free braking power ● aluminum main drive shaft ● steel spur gear for dusty tracks ● low CG ● fully
independent suspension ● front and rear anti-roll bars ● oil-filled coil-over shocks for precision dampening ● adjustable shock positions ● optimized suspension downand up-travel ● adjustable front toe-in (rear optional) ● Hudy Spring SteelTM steering rods ● rugged servo saver ● 36pc nickel-coated steel pivot balls throughout the
suspension ● racing style dish wheels ● rubber low pin tires with foam inserts ● 1/18 racing truck body included ● HUDY Phillips Screwdriver included
●
LUXURY 1/18 MICRO NITRO TRUCK
• high performance micro nitro truck • 1/18 scale • 4WD shaft-drive • powerful 0.8cc nitro engine • uses standard model car fuel • accepts standard electronics • super fast
(50+ km/h) • easy to handle in any conditions • CNC-machined aluminum engine mounts • aluminum slide carburetor • aluminum flywheel • HUDY steel clutch bell •
CNC-machined alu clutch shoes • polished muffler • 30cc fuel tank w/ hypertonic lid & internal stone-type filter • silicone fuel tubing • Swiss T6 7075 CNC-machined
chassis • 1-piece moulded radioplate • top deck for maximum stability • central, ball-bearing supported steering system • externally-adjustable ball differentials front and
rear factory preassembled for smooth operation • model available as a kit only • kit available with or without electronics
One-piece moulded radio tray allows
easy quick access to radio equipment
Aftermarket
Micro Start box
from HUDY
for easy quick
start-up
Laser cut hand-ground steel brake disk provides
adjustable precise four wheel braking
Fully independent suspension front & rear
for precise and responsive handling
Complete set of 26 ball-bearings
for maximum drive train efficiency
Easy access to rear linkage allows
quick adjustments for fine tuning
• uses standard model car fuel
• standard glow-plug design
• durable construction
• large, billet blue anodized aluminum heatsink
• slide adjustable carburator
• dual needle aluminum carburator
• 2 shoe aluminum clutch
• T6 aluminum flywheel
• polished muffler
• HUDY steel 16T clutch bell
c
0.8c
Steel spur gear
30cc racing-style fuel tank
MADE IN JAPAN
© 2006 XRAY
#38 0791- NT18T KIT + ENGINE + MUFFLER + ELECTRIC PACK (2x METAL GEAR SERVO, RECEIVER BATTERY PACK)
#38 0700 - NT18T KIT + ENGINE + MUFFLER
XRAY NT18T OPTIONS
Adjustable Turnbuckle Set
for Toe-in Adjustment
Anti-Roll Bar Front & Rear 1.2mm
#382412
#383302
Low Pin Rubber Tires - Hard Compound
Including Foam Inserts
#389611
NOT INCLUDED
RECEIVER
LEXAN PAINT
FUEL
GLOW PLUG HEATER
#383095
Alu Suspension Block Left
Alu Suspension Block Right
Adjustable Ball Differential
#382252
#382262
#385001
Must be purchased separately to operate the model.
Included in kit #380791
STARTER BOX
MICRO SERVOS
RECEIVER BATTERY
Prototype pictures shown, final products may vary slightly. All specifications are subject to change without prior notice. All rights reserved.
Front Alu Oil Shock Absorbers
Alu Shock Tower Rear
7075 T6 (4mm)
#382095
RX
TRANSMITTER
Alu Shock Tower Front
7075 T6 (4mm)
#388400
Alu Drive Shafts (2)
#385301
XRAY EUROPE
P.O.Box 103, 911 50 Trenčín
Slovakia, Europe
Phone: +421 32 7440180
info@teamxray.com
Rear Alu Oil Shock Absorbers
#388401
HUDY Steel Clutch Bell
#388518 - 18T, #388521 - 21T
#388523 - 23T, #388525 - 25T
1/8 LUXURY OFF-ROAD BUGGY
G e t
d i r t y .
N o w .
1/8 LUXURY OFF-ROAD BUGGY
RC Driver (USA)
"Xray, you just
raised the bar!"
"This buggy is
pure quality."
Racer (UK)
"We have never built
a rallycross car
that went together so
perfectly as the Xray XB8."
Race Car (UK)
"...the world's lightest
1/8 off-road drivetrain."
"The XB8 does drive like
no other rallycross car!”
RC Car Action (USA)
"First-class materials and workmanship."
"It looks like a tool for winning races,
and that's exactly what it is."
www.teamxray.com
"XRAY's first 1/8 nitro buggy - the XB8 - shocked the world, set new standards
for quality and performance, and received numerous awards and praise on
and off the track. I am now proud to present the refined, optimized XB8-TQ raising the standard for quality, luxury, and performance once again."
--- Dipl. Eng. Juraj Hudy, chief designer, XRAY
Complete set of high-speed blue-sealed
ball-bearings, degreased, lightly oiled
for maximum efficiency, individually
controlled, selected and inspected
LUXURY 1/8 OFF-ROAD BUGGY
®
• pinions, spurs, crown gears and clutch bell manufactured by HUDY • 7075 Swiss T6 CNC-machined chassis (3mm), front/rear shock towers (4mm), suspension blocks (5mm
and 8mm), radio plate (3mm), front upper deck (3mm), central diff upper deck (3mm), steering plate (3mm) and front and rear brace(5mm) • all alu parts feature XRAY stylish
black with silver edging design • aluminum shocks with 3.5mm rigid shock shafts • optimized multiple upper and lower shock mounting locations for front and rear • laser-cut,
precision-ground steel brake disks for ultra-efficient fade-free braking • adjustable turnbuckles made from famous Hudy Spring Steel™ • fully-adjustable front and rear suspension
geometry: caster, camber, toe-in, kick-up, anti-squat, ride height, downstop, roll center, wheelbase, Ackermann • includes complete set of eccentric bushings for I.A.C.™
UNIQUE
REVOLUTIONARY
C-HUB SUSPENSION
Integrated Adjustable Caster™uses one
C-block for entire caster range adjustment
LUXURY 1/8 OFF-ROAD BUGGY
• fully-optioned premium high-competition off-road buggy • very easy assembly/disassembly and maintenance • efficient C-hub suspension with XRAY's innovative I.A.C.™
(Integrated Adjustable Caster) • lightweight strong molded steering blocks with molded-in steel bushings • fully-adjustable suspension featuring XRAY's I.S.S.™ (Integrated
Suspension Settings) • ultra-low CG, all parts centralized in chassis • optimised front/rear and left/right weight balance for perfect jumps • pure racing design, highest
performance and long life, ultra-durable parts • fully independent, fully-adjustable suspension with full-time 4WD • ultra-lightweight high-tensile transmission parts hand made
from special world-renowned top-secret self-developed Hudy Spring Steel™ • drive train includes 22 high-speed rubber-sealed bearings for maximum efficiency and speed • ultra
precision front/rear and center diffs with Hudy Spring Steel™ outdrives • also includes front and rear anti-roll bars, alu fuel filter, set of stylish XRAY wheels, full-colored instruction manual
New XRAY racing body
CNC-machined Swiss 7075 T6 alu front
brace & front upper deck
7075 T6 radio plate & diff plate
Rear brace & all suspension holders
CNC-machined from Swiss 7075 T6 aluminum
New rear suspension geometry
All new suspension geometry features longer front &
rear arms, more kick-up and anti-squat, larger caster, greater
suspension down- and up-travel and improved weight balance.
XB8 is the world's most exclusive and premium
off-road buggy featuring only the highest-quality materials of all parts
© 2006 XRAY
2006 NEW & IMPROVED PARTS
2006 New & Improved Parts: all new suspension geometry for improved performance in all racing conditions • increased anti-squat and kick-up positions • increased caster
adjustment • more suspension down travel • new longer front and rear arms for improved stability • improved weight distribution for better handling • T6 7075 premium parts
included: front and rear alu braces, radio plate, central diff upper deck, front aluminum upper deck • new 8mm-thick T6 7075 aluminum front upper arm holder and rear lower
suspension holder • new higher T6 7075 aluminum rear shock tower • Hudy Spring Steel™ steering pivot balls with backstops • new harder shock pistons • hard coated servo saver
for improved durability • improved stronger Hudy Spring Steel™ turnbuckles • improved flywheel, spur gear, and clutch bell • new special long-life steel covered clutch bell
ball-bearings • lightweight 1.71g alu clutch shoes • new racing body
XRAY AUTHENTIC OPTION PARTS
Alu Steering Block
#352255 - right
#352265 - left
Adjustable Alu Rear Hub Carrier
#353355 - right, #353365 - left
XRAY EUROPE
P.O.Box 103, 911 50 Trenčín
Slovakia, Europe
Phone: +421 32 7440180
info@teamxray.com
#352571
Alu "3D" Steering
Plate 7075 T6 (6mm)
XRAY USA
RC America,167 Turtle Creek
Boulevard Suite C, Dallas, Texas 75207
Phone: (800) 519-7221 * (214) 744-2400
xray@rcamerica.com
#358712
Alu Adjustable
Engine Mount
Offset Wheel Axles
#355251 - "+1mm"
#352552 - "+2mm"
#355209
Hudy Spring Steel™
CVD Drive Shaft
plagat XM18RTR nemecky cyan magenta yellow black
RY
U
X
LU
RIVE
FT-D
A
H
CAR
S
4WD
ICRO
M
8
1
/
1
5-cell Battery
sion
ndent Suspen
Fully Indepe
nstops
ntials
ring System
Gear Differe
Ultra-smooth
Placement
Adjustable Dow
y Posts
Adjustable Bod
Precision Stee
n#2
Shock Positio
n#1
Shock Positio
CS
SPE
Front Width
Length
Camber
Front Toe
Downstops
~101 mm
adjustable 98
215 mm
nt/rear
preset -1° fro
option)
ble
sta
dju
t 0.5° (a
preset toe-ou
/rear
justable front
preset or ad
4 ~107 mm
adjustable 10
150 mm
preset 12°
Rear Width
Wheelbase
Caster
Rear Toe-in
Ride Height
ing Weight
Approx. Runn
DED
CLU
S IN
ART
E P
C
N
A
ORM
ERF
H-P
HIG
ber Tires
Pre-glued Rub
with Inserts
T
MEN
UIP
/ EQ
XRAY XMC180
ICS
ON
CTR
erse
E
Rev
L
tor
E
ler with
ck Mo
16 High-Speed
-Bearings
Pre-Oiled Ball
RTR
Wheels
XRAY Starburst
eiver
XRAY XR1 Rec
3-channel
XRAY Micro Sto
ckwidth
Adjustable Tra
Front & Rear
cks
Coil-Over Sho
ED
LUD
INC
Servo
XRAY XMS-01
Saver
Including Servo
Front & Rear
l
Gear Differentia
option)
(adjustable
preset 2.5°
3 ~ 4 mm
395 g
tor Mount
Adjustable Mo
Pack
5-cell Battery
Included)
(Charger not
Shaft
Alu Main Drive
Steel Turnbuckle
m Bumper
Protective Foa
ite
Strong Compos
Drive Shafts
itter
Y XT1 Transm
Premium XRA
d RTR M18
Fully Assemble
Pre-painted,
Body
eca
Fully-d led
Speed Control
signed by
Developed & de
j Hudy
Dipl. Eng. JuraAY
chief designer,
XR
y.com
a
eamxr
t
.
w
w
w
MODEL RACING CARS P.O.BOX 103, 911 50 Trenčín, Slovakia, Europe, Phone: ++421-32-7440180, info@teamxray.com
RC America, 167 Turtle Creek Blvd. Suite C, Dallas, Texas 75207, Phone: 1-800-519-7221, Phone: 214-744-2400, Fax: 214-744-2401, xray@rcamerica.com
4WD SHAFT-DRIVE 1/18 MICRO MONSTER TRUCK
Developed & designed by
Dipl. Eng. Juraj Hudy, chief designer, XRAY
#38 0691 XRAY M18MT
#38 0600 XRAY M18MT
INCLUDING POWER PACK PRO
KIT ONLY
HIGH PERFORMANCE PARTS INCLUDED
PINION SET (4)
16 HIGH-SPEED
PRE-OILED BALL-BEARINGS
ADJUSTABLE MOTOR MOUNT
ADJUSTABLE BALL
DIFFERENTIALS
ALU MAIN DRIVE SHAFT
DRIVE SHAFTS
#38 9102
ADJUSTABLE STEEL
TURNBUCKLES
WHEELS
OIL FILLED COIL-OVER SHOCKS
MICRO MONSTER TRUCK TIRES
CHEVRON PATTERN
REQUIRED
BONUS
HUDY PHILLIPS SCREWDRIVER
FOR
XRAY MICRO SPEED CONTROLLER
XRAY SUPER SIZE 300 MOTOR
6-CELL BATTERY PACK
XRAY MICRO SERVO
OPERATION
ESC
RX
FREE
GREAT HUDY TOOL FOR KIT ASSEMBLY
OPTIONAL POWER PACK PRO
The optional Power Pack Pro includes all indicated
electronics specially-designed for the M18MT to enable the
car to operate. The Power Pack Pro includes Super Size 300
motor with integrated capacitor board, micro speed
controller XMC300R with reverse, high-quality micro servo
with metal gears, and a 6-cell micro battery pack containing
high-performance 2/3A NiMH cells. It is very easy to install
all the electronics on the M18MT chassis. This Power Pack
Pro is included in the M18MT kit with part number #380691.
All electronics feature universal connectors; only
3 connections are required to operate the car.
(Note that a transmitter and receiver are not included in the
Power Pack Pro, and are required for operation.)
TRANSMITTER
RECEIVER
LEXAN PAINT
CA GLUE
MICRO SERVO
MICRO MOTOR
MICRO SPEED
CONTROLLER
MICRO BATTERY PACK
Technical data
Fully adjustable front
suspension
Front suspension
with toe-in adjustment
Length without body:
Front steering block
with wheel mounting
222mm
Front width (outside rims):
195mm
Rear width (outside rims):
195mm
Wheelbase:
150mm
Weight:
395g
M18MT was developed, designed and styled by Dipl. Eng. Hudy Juraj,
manufactured exclusively by XRAY MODEL RACING CARS in Europe.
Xray, Xray logo and M18MT are trademarks of XRAY. XRAY and XRAY USA are
registered trade marks of XRAY. HUDY is a registered trademark.
Adjustable motor mount
All rights reserved. © XRAY. All artwork & design by XRAY.
Servo saver included
Full suspension up travel
Multiple shock positions
www.teamxray.com
MODEL RACING CARS P.O.BOX 103, 911 50 Trenčín, Slovakia, Europe, Phone: ++421 905 402724, support@teamxray.com
4WD SHAFT-DRIVE MICRO TRUCK
Developed & Designed by
1/18 professional 4WD high-competition shaft-drive
micro truck
maximum-efficiency drivetrain includes 22 high-speed
ball-bearings
fully independent front and rear suspension
oil-filled coil-over shocks
rugged servo saver
front and rear anti-roll bars
adjustable turnbuckles
adjustable front and rear ball differentials
adjustable shock position for damping adjustment
easily-adjustable motor mount
chassis accommodates 5- or 6-cell battery packs
extensive line of micro electronics and option parts from XRAY
You can now transform your M18T into
the ultimate racing truck machine.
Purchase original authentic XRAY option
parts, developed and designed by
experienced XRAY engineers,
manufactured exclusively in-house by
XRAY following the strictest total quality
management. These option parts bring
you ultimate quality, luxury, precision,
and highest performance.
And they look AMAZING!
Graphite Micro Truck Conversion Set with battery
holder for 6-cell in-line battery pack.
#381171 Blue
#381172 Silver
#381173 Black
NEW OPT
IONS
Front Alu
Oil Shock
Absorbers
#388400
Rear Alu
Oil Shock
Absorbers
Alu Drive Shafts (2)
Alu Suspension
Block Left
#388401
#385301
Adjustable Turnbuckle Set
for Toe-in Adjustment
Anti-Roll Bar Front & Rear 1.2mm
Alu Shock Tower Front
7075 T6 (4mm)
Alu Suspension
Block Right
Alu Shock Tower Rear
7075 T6 (4mm)
Alu Motor Holder
7075 T6 (5mm)
#382252
#382262
Alu Adjustable Ball Differential
Alu Heat Sink
#383302
Spur Gear 54T - Hard
#382412
#382095
#383095
6-CELL BATTERY PACK
#382052
XRAY SUPER SIZE 300 MOTOR
#385001
#382041
#385754
#389102 XRAY
M18T Power Pa
ck
XRAY MICRO SERVO
XRAY MICRO SPEED CONTROLLER
#389123
#389162
#389170
#389182
www.teamxray.com
Full optioned car shown, options must be purchased separately. XRAY and XRAY logo are trademarks of XRAY. XRAY and XRAY USA are registered trade marks of XRAY.
HUDY and HUDY USA are registered trademarks of HUDY. All specifications are subject to change without prior notice. All artwork and design © XRAY. All rights reserved. © 2005 XRAY.