SL125/2 - Solar Technology Australia
Transcription
SL125/2 - Solar Technology Australia
SL125/C Type 1 5–9nm+ Complete Marine Lantern Assembly This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 Bird deterrent spike Lens moulded from UV-stabilised LEXAN® polycarbonate (IP68 rating) LED lens and Sealite’s 360o Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available with GPS Synchronisation, RF Synchronisation, Radio Control or GSM Monitoring & Control The Sealite Advantage • Complete lantern assembly • SL125 light head available with up to 2 tiers of ultra-high intensity LEDs (36 LEDs per tier) for increased light intensity • 256 user-adjustable flash characteristics • 4 adjustable intensity settings Adjustable solar module(s) angled to maximise solar collection User-replaceable 26Ah battery in 7-stage powder-coated aluminium housing Large industry standard 200mm OD base pattern Shown with optional 2nd solar module and GSM enabled lantern The SL125/C Type 1 Complete Lantern Assembly provides a complete solution for visual navigation requirements. The SL125/C Type 1 offers unique flexibility, and is available in varying configurations to suit a range of installation and intensity requirements. The powder-coated 3mm aluminium housing is laser-cut, and robotically folded for guaranteed precision every time. One or two 20watt solar module(s) are fitted as standard, and the unit can be readily equipped with ancillary equipment. A modular design, all components of the system are replaceable in the unlikely event of damage to the unit. The battery is accessed through the top of the lantern assembly, via a robust swing-hinge. Access to the user-adjustable flash and intensity settings is also achieved through this design. The solar modules are extendable to 51 degrees as standard, with the option to increase in equatorial regions. • Impact resistant battery housing • Vertical light emissions to maintain visibility when passing adjacent to light • IP68 light head & IP66 battery housing ORDER CODES - SLC/C Type 1 SL125-1/C-1 SL125 1-Tier. Complete Lantern Assembly. Single 20w Solar Module. SL125-1/C-2 SL125 1-Tier. Complete Lantern Assembly. Dual 20w Solar Modules. SL125-2/C-1 SL125 2-Tier. Complete Lantern Assembly. Single 20w Solar Module. SL125-2/C-2 SL125 2-Tier. Complete Lantern Assembly. Dual 20w Solar Modules. Range of SL-125 light heads to suit intensity requirements w: www.sealite.com e: info@sealite.com Sealite Pty Ltd Sealite USA, LLC Pelangi International Ltd t: +61 (0)3 5977 6128 t: +1 (603) 737 1311 United Kingdom AUSTRALIA USA (A wholly owned subsidiary of Sealite Pty Ltd) t: +44 (0) 1502 588026 SL125/C Type1 5–9nm+ Complete Marine Lantern Assembly SPECIFICATIONS • Light Source Available Colours Maximum Available Intensity (cd)† Visible Range (nm) Horizontal Output (degrees) Vertical Divergence (degrees) Reflector Type Available Flash Characteristics Intensity Adjustments LED Life Expectancy (hours) SL125-1 or SL125-2 Red, Green, White, Yellow, Blue Refer to SL125 Series Light & Electrical Characteristics Summary 5–9+ 360 9 Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Up to 256 IALA recommended (user adjustable) Adjustable in 25% increments >100,000 Current Draw (mA) Circuit Protection Nominal Voltage (v) Autonomy (days) Temperature Range Refer to Sealite Power Calculator Reverse polarity 12 >20 (14 hour darkness, 12.5% duty cycle) -40 to 80°C Solar Module Type Output (watts) Solar Module Efficiency (%) Charging Regulation Multicrystalline 20 (SL125-1/C-1 and SL125-2/C-1 configurations) 40 (SL125-1/C-2 and SL125-2/C-2 configurations) 14 Microprocessor controlled Battery Type Battery Capacity (Ah) Nominal Voltage (v) Battery Service Life SLA (Sealed Lead Acid) 26 12 Average 5 years Body Material Lens Material Lens Diameter (mm/inches) Lens Design Mounting Height (mm/inches) Width (mm/inches) Mass (kg/lbs) Product Life Expectancy 7-stage powder-coated aluminium LEXAN® Polycarbonate – UV-stabilised 150 / 57/8 External optics with interior flute design 200mm OD base pattern From 665 / 261/4 656 / 253/4 From 18 / 395/8 Up to 12 years CE EN61000-6-3:2001. EN61000-6-1:2001. EN55022. EN61000-4-2:1995. EN61000-4-3:2002 USCG specification HSCG23-05-R-E43013, including Change 1. ISO9001:2008 IP68 light head. IP66 battery compartment Electrical Characteristics Solar Characteristics Power Supply Physical Characteristics Certifications Quality Assurance Waterproof Intellectual Property Patents Trademarks Warranty * Options Available w: www.sealite.com e: info@sealite.com US Pat. No. 6,667,582. AU Pat. No. 778,918 SEALITE® is a registered trademark of Sealite Pty Ltd 3 years • Single or dual solar module(s) • GPS Synchronisation • RF Synchronisation • GSM Monitoring & Control System • Radio Control System • Note - remote monitoring/control will reduce visible range of lantern due to increased power consumption • 3 or 10 degree lens • 40 watt panels • Specifications subject to change or variation without notice * Subject to standard terms and conditions † Intensity setting subject to solar availability Light Characteristics Sealite Pty Ltd Sealite USA, LLC Pelangi International Ltd t: +61 (0)3 5977 6128 t: +1 (603) 737 1311 United Kingdom AUSTRALIA USA (A wholly owned subsidiary of Sealite Pty Ltd) t: +44 (0) 1502 588026 SL125 5–9nm+ LED Marine Lantern Series This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 Bird deterrent spike LED lens and Sealite’s 360o Omnidirectional LED Reflector Automatic night activation (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available with GPS Synchronisation, RF Synchronisation, Radio Control or GSM Monitoring & Control The Sealite Advantage • Available with up to 4 tiers of ultra-high intensity LEDs (36 LEDs per tier) for increased light intensity • 256 user-adjustable flash characteristics • 4 adjustable intensity settings • Operates in conjunction with existing or purpose-built power supplies • Installs in minutes & operates maintenance-free • Vertical light emissions to maintain visibility when passing adjacent to light Lens and base moulded from UV-stabilised LEXAN® polycarbonate (IP68 rating) Large industry standard 200mm OD base pattern The SL125 LED marine lantern is maintenance-free and used by many of the world’s busiest ports and largest militaries. The lantern is available with up to 4 tiers of 36 LEDs (144 LEDs in total), for complete flexibility to suit varying applications. SL125 Technology The SL125 is one of the most advanced LED marine lantern on the market. Utilising the latest software and microcircuitry developments, the lantern boasts a huge number of features including flash-memory and efficient power conversion. The tough polycarbonate lens is specifically designed for use with LEDs, and also enables vessel operators to clearly see the light from above, when passing the AtoN. Lantern Operation The SL125 is ideal to fit on existing structures, or can be supplied as a complete unit with external solar modules and battery compartment. The large industry standard base, and 1 metre of included cable allows the SL125 to be readily fitted to any 12 volt power supply. Once installed, the SL125 requires no operator intervention. The flash characters are easily adjusted onsite by the user, and the lantern will automatically begin operation at dusk – once the ambient light threshold drops sufficiently. • IP68 waterproof SL125-1 SL125-2 SL125-3 SL125-4 Up to 4 tiers of 36 LEDs are available to increase the light intensity of the SL125 unit. The SL125-2, SL125-3 and SL125-4 have 72, 108 and 144 LEDs respectively. Each LED tier utilises the Sealite Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) to increase the intensity and uniformity of the horizontal output. Multiple focal points on the lens then create superior divergence specifications to suit regulations worldwide. w: www.sealite.com e: info@sealite.com Sealite Pty Ltd Sealite USA, LLC Pelangi International Ltd t: +61 (0)3 5977 6128 t: +1 (603) 737 1311 United Kingdom AUSTRALIA USA (A wholly owned subsidiary of Sealite Pty Ltd) t: +44 (0) 1502 588026 SL125 5–9nm+ LED Marine Lantern Series The SL125 4-Tier lantern utilises a unique heat-dissipating domed lens to achieve maximum LED intensity output over a wider range of environmental conditions. Raspberry Island Lighthouse, Apostle Islands, Wisconsin In addition, each LED array incorporates temperature control mechanisms to ensure maximum operational performance. Optional RF Synchronisation The SL125 may be fitted with an optional RF Synchronisation module for short range flash synchronisation – ideal for marina entrances and aquaculture applications. Optional GPS Synchronisation For flash synchronisation of lanterns installed over longer ranges, a GPS module may be fitted. When lanterns flash in synchronisation they can be clearly distinguished from other navaids and confusing background lighting – ideal for rivers and channel marking. Optional GSM Monitoring & Control SL125, Brazil installation The SLC125 lantern series may also be fitted with GSM Remote Monitoring and Control capabilities – enabling users to access real-time diagnostics data and change lantern settings via cell-phone or PC interface. Optional AIS Remote Monitoring AIS integration enables remote monitoring of the SL125 lantern as well as crucial message 21 information to be broadcast to mariners within the region. Optional Radio Control System Radio Control may be fitted to SL125 series products enabling users to remotely modify the setup of their lantern via handheld radio controller. For example, the operator can remotely change between different coloured LED banks (to change the colour of the light), turn their lights ON and OFF, or change the flash setting. Perfect for remote traffic control and to designate an area of activity. SL125-4 pylon installation, Isreal SL125/C lanterns mark wharf entrance, Bandar Abbas, Iran w: www.sealite.com e: info@sealite.com Sealite Pty Ltd Sealite USA, LLC Pelangi International Ltd t: +61 (0)3 5977 6128 t: +1 (603) 737 1311 United Kingdom AUSTRALIA USA (A wholly owned subsidiary of Sealite Pty Ltd) t: +44 (0) 1502 588026 SL125 5-9nm+ LED Marine Lantern Series This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 SL125-1 SL125-2 SL125-3 SL125-4 SPECIFICATIONS • Light Characteristics Light Source Available Flash Characteristics Intensity Adjustments LED Life Expectancy (hours) SL125-1: 36 ultra-high intensity LEDs SL125-2: 72 ultra-high intensity LEDs SL125-3: 108 ultra-high intensity LEDs SL125-4: 144 ultra-high intensity LEDs Red, Green, White, Yellow, Blue Refer to SL125 Series Light & Electrical Characteristics Summary 5–9+ 360 9 (SL125-1, SL125-2 & SL125-3) 5 (SL125-4) Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Up to 256 IALA recommended (user adjustable) Adjustable in 25% increments >100,000 Current Draw (mA) Circuit Protection Nominal Voltage (v) Temperature Range Refer to Sealite Power Calculator Integrated 12 -40 to 80°C Body Material Lens Material Lens Diameter (mm/inches) Lens Design Mounting Height (mm/inches) LEXAN® Polycarbonate – UV-stabilised LEXAN® Polycarbonate – UV-stabilised 150 / 57/8 External optics with interior flute design 3 & 4 hole bolt pattern on 200mm OD base SL125-1: 205 / 81/8 SL125-2: 240 / 91/2 SL125-3: 240 / 91/2 SL125-4: 240 / 91/2 231 / 91/8 From 1.1 / 23/8 Up to 12 years Available Colours Maximum Available Intensity (cd)† Visible Range (nm) Horizontal Output (degrees) Vertical Divergence (degrees) Reflector Type Electrical Characteristics Physical Characteristics • Specifications subject to change or variation without notice * Subject to standard terms and conditions † Intensity setting subject to solar availability Width (mm/inches) Mass (kg/lbs) Product Life Expectancy Certifications CE Quality Assurance Waterproof Intellectual Property Patents Trademarks Warranty * Options Available EN61000-6-3:2001. EN61000-6-1:2001. EN55022. EN61000-4-2:1995. EN61000-4-3:2002 USCG specification HSCG23-05-R-E43013, including Change 1. ISO9001:2008 IP68 US Pat. No. 6,667,582. AU Pat. No. 778,918 SEALITE® is a registered trademark of Sealite Pty Ltd 3 years • GPS Synchronisation • RF Synchronisation • AIS Remote Monitoring • GSM Monitoring & Control System • Radio Control System • Note - remote monitoring/control will reduce visible range of lantern due to increased power consumption • Additional cable • 3 or 10 degree lens w: www.sealite.com e: info@sealite.com Sealite Pty Ltd Sealite USA, LLC Pelangi International Ltd t: +61 (0)3 5977 6128 t: +1 (603) 737 1311 United Kingdom AUSTRALIA USA (A wholly owned subsidiary of Sealite Pty Ltd) t: +44 (0) 1502 588026 SL125 5-9nm+ LED Marine Lantern Series Photometric Output: SL125-1 240 Yellow Intensity (candela) 200 Green Maximum Available Intensity (cd) 160 White Red 120 80 40 0 -15 -10 -5 0 5 10 SL125-1 RED 230 Blue GREEN 201 WHITE 226 YELLOW 129 15 Vertical Divergence (degrees) Photometric Output: SL125-2 400 Yellow Intensity (candela) 350 Green Maximum Available Intensity (cd) 300 White 250 SL125-2 200 RED 383 150 Blue GREEN 317 100 WHITE 321 50 YELLOW 180 0 Red -15 -10 -5 0 5 10 15 Vertical Divergence (degrees) Photometric Output: SL125-3 600 Yellow Intensity (candela) 500 Green Maximum Available Intensity (cd) 400 White Red 300 200 100 0 -15 -10 -5 0 5 10 SL125-3 RED 573 Blue GREEN 405 WHITE 496 YELLOW 306 15 Vertical Divergence (degrees) Photometric Output: SL125-4 900 Yellow Intensity (candela) 800 Green Maximum Available Intensity (cd) 700 600 White 500 Red SL125-4 400 RED 860 300 Blue GREEN 623 200 WHITE 602 100 YELLOW 363 0 -15 -10 -5 0 5 10 15 Vertical Divergence (degrees) w: www.sealite.com e: info@sealite.com Sealite Pty Ltd Sealite USA, LLC Pelangi International Ltd t: +61 (0)3 5977 6128 t: +1 (603) 737 1311 United Kingdom AUSTRALIA USA (A wholly owned subsidiary of Sealite Pty Ltd) t: +44 (0) 1502 588026 SL125 Series & Apollo-155 Series Light & Electrical Characteristics Summary Colour Angle of Peak Divergence Intensity Number for Lens Flashing (cd) of LEDs Current Draw (Amps) Voltage Watts Model Description RED SL125-1.R 1 Tier LED Marine Lantern 9o 230 36 0.42 12v 5W GREEN SL125-1.G 1 Tier LED Marine Lantern 9o 201 36 0.32 12v 3.85W WHITE SL125-1.W 1 Tier LED Marine Lantern 9o 226 36 0.32 12v 3.85W YELLOW SL125-1.Y 1 Tier LED Marine Lantern 9o 129 36 0.42 12v 5W RED SL125-2.R 2 Tier LED Marine Lantern 9o 383 72 0.84 12v 10W GREEN SL125-2.G 2 Tier LED Marine Lantern 9o 317 72 0.64 12v 7.7W WHITE SL125-2.W 2 Tier LED Marine Lantern 9o 321 72 0.64 12v 7.7W YELLOW SL125-2.Y 2 Tier LED Marine Lantern 9o 180 72 0.84 12v 10W RED SL125-3.R 3 Tier LED Marine Lantern 9o 573 108 1.28 12v 15.4W GREEN SL125-3.G 3 Tier LED Marine Lantern 9o 405 108 0.96 12v 11.5W WHITE SL125-3.W 3 Tier LED Marine Lantern 9o 496 108 0.96 12v 11.5W YELLOW SL125-3.Y 3 Tier LED Marine Lantern 9o 306 108 1.28 12v 15.4W RED SL125-4.R 4 Tier LED Marine Lantern 5o 860 144 1.7 12v 20.4W GREEN SL125-4.G 4 Tier LED Marine Lantern 5o 623 144 1.28 12v 15.4W WHITE SL125-4.W 4 Tier LED Marine Lantern 5o 602 144 1.28 12v 15.4W YELLOW SL125-4.Y 4 Tier LED Marine Lantern 5o 363 144 1.7 12v 20.4W RED Apollo-155.R 1 Tier LED Marine Lantern 5o 1140 16 2.6 12v 31.2W GREEN Apollo-155.G 1 Tier LED Marine Lantern 5o 2127 16 2.8 12v 33.6W WHITE Apollo-155.W 1 Tier LED Marine Lantern 5o 2110 16 2.8 12v 33.6W YELLOW Apollo-155.Y 1 Tier LED Marine Lantern 5o 677 16 1.1 12v 13.2W RED Apollo-155-2.R 2 Tier LED Marine Lantern 5o 2052 32 5.2 12v 62.4W GREEN Apollo-155-2.G 2 Tier LED Marine Lantern 5o 3743 32 5.6 12v 67.2W WHITE Apollo-155-2.W 2 Tier LED Marine Lantern 5o 3587 32 5.6 12v 67.2W YELLOW Apollo-155-2.Y 2 Tier LED Marine Lantern 5o 1164 32 2.2 12v 26.4W • Specifications subject to change or variation without notice w: www.sealite.com e: info@sealite.com Sealite Pty Ltd Sealite USA, LLC Pelangi International Ltd t: +61 (0)3 5977 6128 t: +1 (603) 737 1311 United Kingdom AUSTRALIA USA (A wholly owned subsidiary of Sealite Pty Ltd) t: +44 (0) 1502 588026
Similar documents
SL125 Specifications in English
Up to 256 IALA recommended (user adjustable) Adjustable in 25% increments
More information