DIESEL PARTICULATE FILTER CLEANING

DPF CLEANING
TECHNOLOGY COMPARISON
PULSE CLEANING TECHNOLOGY
(OFFERED BY OTHERS)
Attempts to clean 5000
cells at once. Center
cells clean first, while
outside cells get little
cleaning. Cleaning stops
when a path of least
resistance is established,
typically through the
center of the filter only.
PROCESS TIME: 20 min.
1. Cleaning action is
hidden
2. Cleans from only one
end of the filter
3. Cleans center cells
4. Don’t know when
cleaning is complete
5. No diagnostic
capability
FSX TrapBlaster
Air Knife Scanning Technology
(Patented)
Cleans using Air Knife
Scanning technology
(patented) on both
ends of the filter. Each
individual cell is scanned
numerous times from
both directions.
PROCESS TIME: 22 min.
1. Cleaning action is
visable
2. Cleans from both
ends of the filter
3. Cleans all cells within
filter
4. Cleaning is complete
when dust stops
exiting
5. Diagnostic feature
reveals failed cell walls
Eastern Michigan Kenworth
3031 Wyoming Avenue
Dearborn, MI 48120
T: (313) 842-3000
www.emKenworth.com
Eastern Michigan Kenworth
43320 North Gratiot
Clinton Township, MI 48036
T: (586) 468-6301
www.emKenworth.com
Central Michigan Kenworth
3046 Commerce Centre
Saginaw, MI 48601
T: (989) 754-4500
www.cmKenworth.com
EASTERN AND CENTRAL
MICHIGAN KENWORTH
NOW OFFERING THE
LATEST IN COMPLETE
Central Michigan Kenworth
2556 Alamo Drive
Lansing, MI 48911
T: (517) 318-0800
www.cmKenworth.com
DIESEL PARTICULATE
FILTER CLEANING
Eastern Michigan PacLease
3031 Wyoming Avenue
Dearborn, MI 48120
T: (800) 793-0555
(800) 793-0555
Keeping Your Truck Running Smooth
Why Clean your DPF?
Diesel Particulate Filters (DPFs) are emissions
devices installed on all over the road diesel
engines manufactured beginning in 2007.
DPFs are designed to burn soot. Unburnable ash
gradually collects in the filter causing excessive
back pressure and regenerations. DPFs are
expensive parts costing $2,300 to $8,000. We
can service your DPF at a fraction of the cost of
a new filter.
Failure to service your DPF can cause the
following problems:
1. DPF Failure (Requiring replacement)
2. Down Time
3. Lower fuel economy
The DPF must be removed from the truck in
order to be serviced. Our high quality cleaning is
essential for maximum filter life.
When to Clean
Most engine manufactures recommend
removing the DPF for cleaning at 250,000 miles.
Research and testing has found that ash begins
hardening in the filter cells as early as 150,000
miles. Once ash hardens it can cause permanent
damage and cracking.
State-of-the-Art Cleaning
Quality Control
The FSX DPF Cleaning System is the world’s most
advanced cleaning system and is specified by
OEMs.
Both our FSX equipment and cleaning process has
been tested and approved by major OEMs.
Using patented state-of-the-art Air Knife
Scanning Technology, we are able to blow air
from opposite directions scanning the entire
surface of the filter and cleaning every cell.
By using Air Knife Scanning Technology, we can
remove an average 95% of the ash and soot in
about 22 minutes.
Inspection & Testing
We test and inspect your DPF at every step of the
cleaning process.
The FSX testing equipment is state-of-the-art and
provides precision evaluation for air flow and
micro-pore performance.
The cleaning results from your DPF are recorded
in the our database and compared to OEM
specifications. The results are made available to
you.
FSX cleaning equipment is proven to provide the
best cleaning system available.
Our cleaning process will NOT damage ceramic
substrate or catalyzed wash-coats.
Getting Started
We offer local pickup and delivery in
selected regions.
You can also ship your filter for cleaning using
UPS, Fed-Ex or truck freight.
Our Competitive
Pricing Includes...
DOC Cleaning $150.00
Basic Oxidation Catalyst cleaning.
DPF STAGE 1 Pneumatic Cleaning $250.00
Our Flagship Trap BlasterTM utilizes its advanced
technology to detect a failing filter while pushing jet
forced air through both ends of the filter, cleaning
cell by cell, guaranteeing a dust free recovered filter.
DPF Stage 2 Thermal Cleaning $500.00
After receiving a double round of stage 1 Pneumatic
cleaning, your DPF is placed in our Trap BurnerTM
which is then heated and cooled in a 12 hour
process to ensure the filter has been cleaned to
its maximum potential.