RoTab Bilayer

RoTab Bilayer
The key to bilayer tablet development!
Technical data RoTab Bilayer
B-20 D-16
B/D-8
FlexAdapt X-16
16 mm 25 mm 16/25 mm 25 mm
Number of punch stations
20 16
8/8 16
Tools (EU or IPT standard)
B – 30.16* D – 38.1* B/D BBS/BB/B/D
Max. tablet diameter
Max. fill depth 1st layer
2 kN
Max. fill depth 2nd layer
10 kN
Max. main compression
60 kN
Penetration range upper punch
Max. capacity in tabs/h
2 – 4 mm
18 –48,000** 14.4 – 38,400** 7.2 – 19,200** Power supply
4.5 kW
Weight
1,300 kg
Measurements in mm (L x W x H)1,510 x 710 x 1,875
*outer die diameter, **for single layer operation, depending on product
kg-pharma GmbH & Co. KG
Neuer Wall 80
D-20354 Hamburg
T +49 (0)40 6094 5619-0
F +49 (0)40 6094 5619-9
E info@kg-pharma.de
W www.kg-pharma.de
Local representative:
14.4 – 38,400**
RoTab Bilayer
RoTab Bilayer
Bilayer tablet press
Software
Development of bilayer tablets belongs
Our R&D software is modular designed and
to the most challenging tasks in tableting
can be upgraded with additional functions
technology.
at any time.
Funnel A
Funnel B
Best results can only be achieved with a perfect interaction of compression forces, dosing
Pre-compression roll
Tamping roll
Main compression roll
touch-screen guarantees precise results and
Granulate B
Granulate A
An advanced industrial PC-system with 15“
and formulation.
fast graphical evaluations.
Two separate filling stations, three roller
Optifiller
&
product scraper
stations, the precise load cells and the direct
Upper punches
compression force measurement method,
Basic
PRODUCTION
R&D
Graphical
display and
evaluation
R&D Plus
Graphical
display and
evaluation
The wide range of instrumentations allows
Lower punches
Tamping
1st layer
Ejection
force
Main
compression
Pre
compression
Main
compression
Ejection
force
a nearly perfect simulation of production
make the RoTab Bilayer the most innovative
R&D development.
Pre
compression
R&D
machines in laboratory scale, e.g.:
high performance bilayer tablet press for
Initial
compaction
1st layer
Tablet take-off
force
Punch-forcedisplacement
Punch
tightness
• compression force measurement
tamping station
The cGMP-conform design is dedicated
to small space requirements.
• pre- and main compression force
Processing Direction
measurement final compression
• ejection force measurement
• punch-force-displacement
RoTab Bilayer features:
• tablet take-off force
• single and bilayer tablet production
• punch tightness measurement
• automatical tablet weight regulation
by filling depth
• Optifiller torque control
• stepless RPM adjustment for die
table and Optifiller
• servo-driven roller stations
• servo-driven tablet hardness
adjustment
• automatical punch lubrication
with adjustable interval
... and much more!
„Basic“
„R&D“
„R&D Plus“
Software package for prevailing use of RoTab
Basic package for galenical R&D on the
Contains all functions of „Basic“ and „R&D“
Bilayer in production mode. Operation with
RoTab Bilayer. Contains evaluation and
plus the possibility to evaluate and visualize
15“ touch-screen display, by automatical
graphical visualization of instrumented
the following special instrumentations on
dosing regulation by compression force and
measuring points, as compression 1st layer,
the 15“ touch-screen display:
adjustment of die table and Optifiller speed.
pre-, main compression and ejection force
Punch tightness control, tablet scraper force
Optional independent hardness regulation
on a 15“ touch-screen display. Punch tight-
and display of force-displacement-diagram-
available.
ness control can be selected as an additional
mes. With „R&D Plus“ the RoTab Bilayer
alarm function. Upgrade to „R&D Plus“ is
sets new standards in tabletting technology!
possible at any time.