Door Thickness Specifications

Transcription

2008 dimension
6/19/09
4:06 PM
Page 1
2008
Technical
Reference
Manual
An ASSA ABLOY Group brand
2008 dimension
6/19/09
4:06 PM
Page 2
CONTENTS
Mortise Entrance Handlesets
a) Dimensions/Door Thickness Specifications
b) Component Dimensions
c) Lock Cartridge Dimensions
d) Installation Instructions
e) Boring Specifications
Stainless Steel - Entrance Handleset
3-17
18
19
20-23
24-31
Key-In Knob & Lever Handlesets
b) Installation Instructions
32-33
34-39
125
126
127-129
Stainless Steel - Deadbolts
b) Lock Specifications
c) Installation Instructions
130
131
132-134
Stainless Steel - Passage & Privacy Sets
Single & Two-Point Locks
a) Dimensions-Rosettes
40
41-42
a) Dimensions-Knobs & Levers
d) Component Dimensions
135-137
138
139-140
141
Tubular Entrance Handlesets
a) Dimensions
b) Door Thickness Specifications
d) Boring Specifications
43-56
57-60
61-66
67-70
71-77
78-82
83-86
Decorative Plate Locks
a) Dimensions
d) Special Mounting Hardware Components
103
104
Passage & Privacy Sets
a) Dimensions-Rosettes
b) Dimensions-Knobs & Levers
142
143-145
Stainless Steel - Cabinet Hardware
146-147
Cabinet Hardware
a) Dimensions
b) Screw Specifications
148-156
157-160
Large Pulls & Push/Pull Plates
87-94
95-97
98-101
102
Thumbturn Privacy Locksets
a) Dimensions
a) Dimensions
Deadbolts
a) Dimensions
Stainless Steel - Bath Hardware
105
106-120
121-124
a) Dimensions
161-165
166-170
Door Accessories
a) Dimensions
b) Installation/Boring Instructions
171-179
180-203
Bath Hardware
a) Dimensions
204-208
209-213
Hinges
a) Dimensions
b) Screw Specifications
c) Spring Hinge-Adjustment Instructions
d) Dimensions-Brass Decorative Tips
e) Dimensions-Steel Decorative Tips
214-215
215
216
217
218
2008 dimension
6/19/09
4:06 PM
Page 3
BRASS MORTISE ENTRANCE HANDLESETS
113⁄ 16”
21⁄ 4”
35⁄ 8”
3”
21 ⁄ 2”
3”
3”
10”
33⁄ 4”
10”
4”
41 ⁄ 2”
19”
19”
3”
3”
113⁄ 16”
Salem Trim Style
Part # 3301
113⁄ 16”
Standard interior trim
Part # 3301/3302
Memphis Trim Style
Part # 3302
Additional Dimensions: ( Part # 3301 & 3302 )
• Exterior Projection is 23 ⁄ 4”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 11 ⁄ 4”
• Clearance between door & grip is 2”
• Plates thickness: 1 ⁄ 2”
* Lever By Lever/Knob By Knob Mortise Entrance Handlesets
• Same dimensions as Monolithic exterior trim of standard mortise entrance handlesets
Door Thickness Specifications:
• Standard Door Thickness: 13⁄ 4”- 2”
Standard Components:
• 13⁄ 8” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 11⁄ 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
• Extended Door Thickness: 2” - 21⁄ 2”
Extended Components:
• 21⁄ 2” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
• Extended Door Thickness: 21⁄ 2” - 23⁄ 4”
• 21⁄ 4” Long Spindle
• Extended Thumbpress
• Extended Strikeplate
• Same dimensions for dummy function
3
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:06 PM
Page 4
113⁄ 16”
23⁄ 8”
58
213⁄ 16”
3 ⁄ ”
39⁄ 16”
21 ⁄ 2”
93⁄ 4”
23⁄ 4”
93⁄ 4”
37⁄ 8”
41 ⁄ 2”
17”
17”
213⁄ 16”
Jackson Trim Style
Part # 3303
Part # 3303/3304
17⁄ 16”
17⁄ 16”
Hamilton Trim Style
Part #3304
• Exterior Projection is 27⁄ 8”
• Clearance between door & grip is 11 ⁄ 2”
1
• Standard Door Thickness: 13⁄ 4”- 2” • Extended Door Thickness: 2”- 2 ⁄ 2”
•
2” Long Spindle
• Thumbpress
• Thumbpress
• Strikeplate
• Strikeplate
• Extended Door Thickness: 21⁄ 2”- 23⁄ 4”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
4
2008 dimension
6/19/09
4:06 PM
Page 5
23⁄ 4”
23⁄ 4”
5 16
3 ⁄ ”
105⁄ 16”
35⁄ 16”
11⁄ 2”
3”
15 16
3 ⁄ ”
39⁄ 16”
21⁄ 2”
5 16
10 ⁄ ”
10”
34
2 ⁄ ”
41⁄ 8”
33⁄ 4”
43⁄ 4”
175 ⁄ 8”
171 ⁄ 4”
21 ⁄ 4”
Part #3342
17⁄ 16”
Oval Ribbon & Reed Mortise Trim
Part #3342
Part #3310
21 ⁄ 4”
Mills Trim
Part #3310
Additional Dimensions: ( Part # 3342 )
• Overall Grip thickness: 13⁄ 8”
• Overall Grip thickness: 1”
12
• Clearance between door & grip is 13⁄ 8”
• Plates thickness: ⁄ ”
1
• Standard Door Thickness: 1 ⁄ ”- 2” • Extended Door Thickness: 2”- 2 ⁄ 2”
•
2” Long Spindle
• Thumbpress
• Thumbpress
• Strikeplate
• Strikeplate
34
5
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:06 PM
Page 6
23⁄ 4”
25⁄ 8”
39⁄ 16”
23⁄ 8”
23⁄ 4”
10”
10”
33⁄ 4”
171 ⁄ 4”
181 ⁄ 2”
21 ⁄ 4”
Part # 3306/3305
3”
21 ⁄ 4”
Manhattan Trim Style
Part # 3306
Melrose Mortise Trim Style
Part # 3305
34
• Standard Door Thickness: 1 ⁄ ”- 2”
• Thumbpress
• Strikeplate
• Extended Door Thickness: 2”- 21⁄ 2”
• Thumbpress
• Strikeplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
6
2008 dimension
6/19/09
4:06 PM
Page 7
31⁄ 8”
31⁄ 8”
3”
3”
3”
47⁄ 8”
123⁄ 16”
175 ⁄ 8”
123⁄ 16”
201 ⁄ 2”
51⁄ 16”
17⁄ 16”
Part # 3307/3309
Regency Trim Style
Part # 3307
Versailles Trim Style
Part # 3309
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
7
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:06 PM
Page 8
3”
3”
47⁄ 16”
31⁄ 2”
11”
3”
213⁄ 16”
25⁄ 8”
213⁄ 16”
11”
111⁄ 4”
111⁄ 4”
49⁄ 16”
53⁄ 8”
18”
18”
Part # 3308
Part # 3341
17⁄ 16”
21⁄ 4”
Craftsman Trim Style
Part # 3308
Valley Forge Mortise Trim Style
Part # 3341
58
• Exterior Projection is 2 ⁄ ”
• Exterior Projection is 3”
18
• Overall Grip thickness: 1 ⁄ ”
38
• Clearance between door & grip is 1 ⁄ ”
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
8
2008 dimension
6/19/09
4:06 PM
Page 9
213⁄ 16”
21⁄ 8”
35⁄ 16”
213⁄ 16”
93⁄ 4”
93⁄ 4”
19”
43⁄ 16”
3”
Part # 3343
21⁄ 8”
Charleston Trim Style
Part # 3343
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
9
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:06 PM
Page 10
WROUGHT STEEL MORTISE ENTRANCE HANDLESETS
Steel Sectional Mortise
25⁄ 16”
13⁄ 4”
35⁄ 8”
31 ⁄ 2”
21 ⁄ 2”
95⁄ 8”
29⁄ 16”
33⁄ 4”
43⁄ 8”
17”
3”
13⁄ 4”
21 ⁄ 8”
13⁄ 4”
San Carlos Grip
Normandy Grip
Part # 3315
Part # 3316
Part # 3314/3315/3316
Additional Dimensions: (Part # 3315)
Lafayette Grip
Part # 3314
18
• Exterior Projection is 3 ⁄ ”
12
• Overall Grip thickness: 1 ⁄ ”
34
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
10
2008 dimension
6/19/09
4:06 PM
Page 11
WROUGHT STEEL MORTISE ENTRANCE HANDLESETS
Steel Monolithic Mortise
25⁄ 16”
21⁄ 16”
35⁄ 8”
25⁄ 16”
95⁄ 8”
95⁄ 8”
33⁄ 4”
17”
3”
13⁄ 4”
21 ⁄ 8”
13⁄ 4”
San Carlos Grip
Normandy Grip
Part # 3312
Part # 3313
Part # 3308
Lafayette Grip
Part # 3311
14
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
11
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 12
BRONZE MORTISE ENTRANCE HANDLESETS
13⁄ 4”
21 ⁄ 8”
213⁄ 16”
23⁄ 4”
31 ⁄ 2”
27⁄ 16”
31 ⁄ 2”
91 ⁄ 2”
23⁄ 4”
23⁄ 4”
41 ⁄ 2”
161 ⁄ 4”
3”
91 ⁄ 2”
161 ⁄ 4”
35⁄ 8”
195⁄ 16”
3”
3”
21 ⁄ 8”
21 ⁄ 8”
Part # 3321/3322/3323
Denver Mortise Entryset
Part # 3323
Cheyenne Entryset
Part # 3321
Topeka Entryset
Part # 3322
Additional Dimensions: (Part # 3321& 3322)
12
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
12
2008 dimension
6/19/09
4:07 PM
Page 13
11⁄ 2”
21 ⁄ 4”
21 ⁄ 4”
213⁄ 16”
3”
23⁄ 8”
213⁄ 16”
10”
213⁄ 16”
213⁄ 16”
37⁄ 16”
14
4 ⁄ ” 16 ⁄ ”
34
161 ⁄ 4”
10”
19”
45⁄ 16”
3”
3”
21⁄ 8”
23⁄ 16”
Rectangular Sectional Mortise
Part # 3324
Rectangular Monolithic Mortise
Part # 3325
Rectangular Full Length Mortise
Part # 3326
Part # 3324/3325/3326
Additional Dimensions: (Part # 3324, 3325 & 3326)
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
13
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 14
213⁄ 16”
213⁄ 16”
21⁄ 4”
21 ⁄ 4”
213⁄ 16”
10”
37⁄ 16”
10”
161 ⁄ 4”
19”
45⁄ 16”
3”
23⁄ 16”
Part # 3327/3328
Morgan Entryset
Part # 3327
Rockford Entryset
Part # 3328
Additional Dimensions: (Part # 3327 & 3328)
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
14
2008 dimension
6/19/09
4:07 PM
Page 15
LOST WAX CAST BRONZE MORTISE ENTRANCE HANDLESETS
3”
113⁄ 16”
21 ⁄ 4”
37⁄ 16”
58
3 ⁄ ”
21 ⁄ 2”
10”
3”
10”
3”
47⁄ 16”
41 ⁄ 2”
181 ⁄ 2”
181 ⁄ 2”
113⁄ 16”
Naples Mortise Entryset
Part # 3334
Part # 3331/3334
3”
3”
113⁄ 16”
Da Vinci Entryset
Part # 3331
Additional Dimensions: (Part # 3334, 3331)
• Plates thickness: 11⁄ 16”
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
15
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 16
3”
211⁄ 16”
3”
37⁄ 8”
101 ⁄ 2”
10”
43⁄ 8”
171 ⁄ 2”
Part # 3333
12
1 ⁄ ”
Octagon Mortise Entryset
Part # 3333
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
16
2008 dimension
6/19/09
4:07 PM
Page 17
27⁄ 8”
3”
35⁄ 8”
3”
11”
11”
37⁄ 8”
18”
21 ⁄ 2”
2”
Part # 3332
Art Nouveau Mortise Entryset
Left Hand Grip
Part # 3332
• Thumbpress
• Strikeplate
• Thumbpress
• Strikeplate
17
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 18
STRIKEPLATES FOR MORTISE LOCKS
11⁄ 4”
58
⁄ ”
58
⁄ ”
41⁄ 8”
427 ⁄ 32”
18
4 ⁄ ”
47 ⁄ 8”
41⁄ 8”
78
18
4 ⁄ ”
4 ⁄ ”
33⁄ 8”
47⁄ 8”
34
⁄ ”
17⁄ 32”
Steel Understrikeplate
11⁄ 4”
11⁄ 4”
Mortise Full-Lip Strikeplate
Part # 86147
Flat Strikeplate
Part # 86148
11⁄ 4”
Extended Strikeplate
Part # 86149
Mortise Cylinder
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
18
2008 dimension
6/19/09
4:07 PM
Page 19
Part # 3300 & 3800
19
2008 dimension
6/19/09
4:07 PM
Page 20
20
2008 dimension
21
6/19/09
4:07 PM
Page 21
2008 dimension
6/19/09
4:07 PM
Page 22
22
2008 dimension
23
6/19/09
4:07 PM
Page 23
2008 dimension
6/19/09
4:07 PM
Page 24
BORING SPECIFICATIONS
For Reference Only
24
2008 dimension
6/19/09
4:07 PM
Page 25
25
For Reference Only
2008 dimension
6/19/09
4:07 PM
Page 26
(Dummy)
For Reference Only
26
2008 dimension
6/19/09
4:07 PM
Page 27
(Dummy)
27
For Reference Only
2008 dimension
6/19/09
4:07 PM
Page 28
28
2008 dimension
29
6/19/09
4:07 PM
Page 29
2008 dimension
6/19/09
4:07 PM
Page 30
30
2008 dimension
31
6/19/09
4:07 PM
Page 31
2008 dimension
6/19/09
4:07 PM
Page 32
BRASS KEY IN KNOB AND LEVER SETS
Includes Latch and Strike Plate
211⁄ 16” Projection
211⁄ 16”
5 16
2 ⁄ ” Diameter
Providence Knob (P)
Egg Knob (E)
15⁄ 8”
• Space between rosette and knob is
approx. 1”
25⁄ 16” Diameter
Waverly Knob (W)
23⁄ 8” Diameter
Rope Knob (RK)
approx. 1”
approx. 1”
13⁄ 4” W
15⁄ 8” Gap
18
2 ⁄ ” Gap
43⁄ 4” W
43⁄ 4” W
34
4 ⁄ ”W
Cortina Lever (C)
Rope Lever (RL)
34
⁄ ” Thickness
34
⁄ ” Thickness
14
• Extended Door Thickness Range: 2”- 23⁄ 4”
* Specify Door Thickness when ordering
47⁄ 16”
* Extension Kit not available separately
23⁄ 4” Diameter
23⁄ 4” Diameter
34
34
⁄ ” Thickness
41⁄ 2”
⁄ ” Thickness
29⁄ 16”
21⁄ 2”
32
2008 dimension
6/19/09
4:07 PM
Page 33
SANDCAST BRONZE KEY IN KNOBSET AND LEVERSET
Includes Latch and Strike Plate
2” Gap
21⁄ 4” Diameter
Winchester Knob (WC)
5” W
Durango Lever (D)
34
⁄ ” Thickness
47⁄ 16”
* Specify Door Thickness when ordering
41⁄ 2”
* Extension Kit not available separately
34
⁄ ” Thickness
23⁄ 4” Diameter
29⁄ 16”
34
⁄ ” Thickness
21⁄ 2”
LOST WAX CAST BRONZE KEY IN KNOBSET AND LEVERSET
17⁄ 8” Gap
Petal Knob (PT)
51⁄ 16”
Siena Lever (SN)
25⁄ 16” Diameter
34
⁄ ” Thickness
41⁄ 2”
47⁄ 16”
34
⁄ ” Thickness
23⁄ 4” Diameter
34
⁄ ” Thickness
33
29⁄ 16”
29⁄ 16”
2008 dimension
6/19/09
4:07 PM
Page 34
34
2008 dimension
35
6/19/09
4:07 PM
Page 35
2008 dimension
6/19/09
4:07 PM
Page 36
36
2008 dimension
37
6/19/09
4:07 PM
Page 37
2008 dimension
6/19/09
4:07 PM
Page 38
38
2008 dimension
39
6/19/09
4:07 PM
Page 39
2008 dimension
6/19/09
4:07 PM
Page 40
SINGLE POINT & TWO POINT LOCKS WITH TRENTON PLATES
51 ⁄ 2” C-TO-C DOOR PREP
Single Point Lock
Single Point Lock
Two Point Lock
Two Point Lock
Key in Handle
Key in Handle, Dummy
Single Cylinder
Double Cylinder
5300
5350
5310
5320
• Specify Door Thickness when ordering
• Extension Kit not available separately
• Schlage C Keyway
• Standard Door Prep and Installation
• Door Prep 51 ⁄ 2” C-To-C
• Plate dimensions are the same as Trenton Plate Style on page xx
• Projection depends on Knob/Lever Style
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
40
2008 dimension
41
6/19/09
4:07 PM
Page 41
2008 dimension
6/19/09
4:07 PM
Page 42
42
2008 dimension
6/19/09
4:07 PM
Page 43
BRASS TUBULAR ENTRANCE HANDLESETS
27⁄ 8”
21⁄ 16”
25⁄ 8”
27⁄ 8”
101⁄ 4”
101⁄ 4”
23⁄ 8”
Part # 4814
2”
11⁄ 2”
Zeus Style
Part # 4814
• Clearance between door & grip is 1”- 13⁄ 8”
• Refer to page 57 for Door Thickness Specifications
43
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 44
211⁄ 16”
21⁄ 4”
35⁄ 8”
211⁄ 16”
23⁄ 4”
21⁄ 2”
3”
3”
10”
3”
3”
11”
11”
41⁄ 2”
19”
19”
21⁄ 2”
191⁄ 2”
Part # 4410/4411/4412
3”
3”
3”
113⁄ 16”
113⁄ 16”
Saratoga Style
Marietta Style
Part # 4410
Part # 4411
17⁄ 8”
Marietta-6 Style
Part # 4412
11 16
• Exterior Projection is 2 ⁄
”
• Standard Interior trim dimensions
same as 8450, 8350, 8100
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
44
2008 dimension
6/19/09
4:07 PM
Page 45
213⁄ 16”
12
213⁄ 16”
2 ⁄ ”
23⁄ 8”
58
3 ⁄ ”
93⁄ 4”
212⁄ 16”
34
9 ⁄ ”
41⁄ 2”
21⁄ 8”
19”
19”
Part # 4313
3”
3”
21⁄ 8”
21⁄ 8”
Nashville Style
Richmond Style
Part # 4312/4322
Part # 4313/4323
• Standard Interior trim dimensions
same as 8108, 8466, 8366
45
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 46
21⁄ 4”
213⁄ 16”
35⁄ 8”
93⁄ 4”
213⁄ 16”
12
2 ⁄ ”
213⁄ 16”
19”
23⁄ 8”
171⁄ 4”
41⁄ 2”
93⁄ 4”
21⁄ 8”
Part # 4311
17⁄ 16”
Orleans Style
Part # 4311
17⁄ 16”
Knoxville Style
Part # 4310
• Standard Interior trim dimensions same as
8458, 8358, 8108
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
46
2008 dimension
6/19/09
4:07 PM
Page 47
213⁄ 16”
3”
213⁄ 16”
3”
31⁄ 8”
23⁄ 4”
31⁄ 4”
3”
11”
113⁄ 4”
11”
113⁄ 4”
18”
18”
31⁄ 4”
23⁄ 4”
Part # 4111
Part # 4811
21⁄ 4”
21⁄ 4”
17⁄ 16”
Valley Forge Style
Part # 4111
Arts & Crafts Style
Part # 4811
12
47
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 48
3”
27⁄ 16”
211⁄ 16”
211⁄ 16”
23⁄ 8”
23⁄ 4”
21⁄ 8”
23⁄ 8”
23⁄ 4”
10”
10”
181⁄ 2”
43⁄ 4”
12
171 ⁄ 4”
17 ⁄ ”
23⁄ 8”
Part # 4211/4212
Part # 4213
21⁄ 4”
14
2 ⁄ ”
21⁄ 4”
21⁄ 4”
Hamden Style
Part # 4213
Wilshire Style
Part # 4211
17”
Melrose Style
Part # 4212
Additional Dimensions: (Part # 4213/4211/4212)
8468, 8368, 8121
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
48
2008 dimension
6/19/09
4:07 PM
Page 49
3”
3”
35 ⁄ 16”
3”
35 ⁄ 16”
35⁄ 16”
31⁄ 16”
38
2 ⁄ ”
35⁄ 16”
211⁄ 16”
123⁄ 16”
105 ⁄ 16”
18”
18”
105 ⁄ 16”
18”
123⁄ 16”
39⁄ 16”
Part # 4711/4911
23⁄ 8”
Part # 4714
17⁄ 16”
17⁄ 16”
Oval Ribbon & Reed Style
Part # 4714
Ribbon & Reed Style
Part # 4711
Imperial Style
Part # 4911
Additional Dimensions: (Part # 4714/4711/4911)
49
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 50
WROUGHT STEEL TUBULAR ENTRANCE HANDLESETS
37⁄ 16”
37⁄ 16”
37⁄ 16”
21⁄ 2”
21⁄ 2”
21⁄ 2”
29⁄ 16”
29⁄ 16”
29⁄ 16”
17”
43⁄ 8”
17”
43⁄ 8”
19”
43⁄ 8”
Part #
461212/461222/461232
3”
13⁄ 4”
13⁄ 4”
Sectional Style
Lafayette Grip
Part # 461212
Sectional Style
Normandy Grip
Part # 461222
2”
Sectional Style
San Carlos Grip
Part # 461232
Additional Dimensions: (Part # 461212/461222)
• Overall Grip thickness:3⁄ 4”
34
• Overall Grip thickness: ⁄ ”
58
8451, 8361, 7101
8451, 8361, 7101
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
50
2008 dimension
6/19/09
4:07 PM
Page 51
WROUGHT STEEL TUBULAR ENTRANCE HANDLESETS
29⁄ 16”
29⁄ 16”
29⁄ 16”
21⁄ 16”
21⁄ 16”
29⁄ 16”
25⁄ 16”
21⁄ 16”
95⁄ 8”
95⁄ 8” 95⁄ 8”
95⁄ 8”
21⁄ 16”
17”
17”
19”
Part #
461111/461121/461131
3”
13⁄ 4”
13⁄ 4”
Monolithic Style
Lafayette Grip
Part # 461111
Monolithic Style
Normandy Grip
Part # 461121
2”
Monolithic Style
San Carlos Grip
Part # 461131
• Interior trim same as 8451, 8361, 7101
• Interior trim same as 8451, 8361, 7101
12
• Plates thickness: ⁄ ”
51
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 52
SANDCAST BRONZE TUBULAR ENTRANCE HANDLESETS
213⁄ 16”
23⁄ 8”
21⁄ 2”
213⁄ 16”
3 16
2 ⁄ ”
7 16
3 ⁄ ”
23⁄ 8”
91⁄ 2”
213⁄ 16”
91⁄ 2”
195⁄ 16”
161⁄ 4”
161⁄ 4”
47⁄ 16”
2”
Part #
451211/451112/451332
3”
3”
21⁄ 8”
21⁄ 8”
Remington Style
Part # 451112
Denver Style
Part # 451211
3”
Greeley Style
Part # 451332
78
8457, 8357, 7108
Grip-By-Grip Entrance Handlesets:
• Dimensions are the same as exterior
trim of standard grip handlesets
• Refer to page 54 for door thickness specifications
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
52
2008 dimension
6/19/09
4:07 PM
Page 53
23⁄ 8”
21⁄ 4”
21⁄ 4”
3”
213⁄ 16”
213⁄ 16”
213⁄ 16”
21⁄ 2”
10”
161⁄ 4”
43⁄ 4”
161⁄ 4”
10”
19”
21⁄ 4”
3”
Part #
451411/451512/451613
3”
23⁄ 16”
23⁄ 16”
Rectangular Sectional
Part # 451411
Rectangular Monolithic
Part # 451512
213⁄ 16”
Rectangular Full Length
Part # 451613
78
8465, 8365, 7104
53
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 54
213⁄ 16”
213⁄ 16”
25⁄ 8”
213⁄ 16”
21⁄ 4”
14
2 ⁄ ”
34
1 ⁄ ”
21⁄ 2”
10”
213⁄ 16”
10”
14
16 ⁄ ”
161⁄ 4”
19”
12
4 ⁄ ”
21⁄ 4”
Part #
451711/451812/451913
3”
3”
23⁄ 16”
23⁄ 16”
Sheridan Style
Part # 451812
Laramie Style
Part # 451711
Creston Style
Part # 451913
78
7100, 8477, 8374
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
54
2008 dimension
6/19/09
4:07 PM
Page 55
LOST WAX CAST BRONZE TUBULAR ENTRANCE HANDLESETS
21⁄ 2”
3”
3”
21⁄ 4”
35⁄ 8”
21⁄ 2”
10”
3”
41⁄ 2”
181⁄ 2”
10”
181⁄ 2”
21⁄ 4”
Part # 471224/471112
3”
3”
113⁄ 16”
13 16
1 ⁄ ”
Tuscany Style
Door Prep 5 1/2” Center to Center
Part # 471112
Tuscany Sectional Style
Part # 471224
38
8456, 8356, 71012
55
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 56
LOST WAX CAST BRONZE TUBULAR ENTRANCE HANDLESETS
3”
3”
3”
23⁄ 4”
3”
111⁄ 16”
215⁄ 16”
23⁄ 4”
215⁄ 16”
101⁄ 2”
111⁄ 16”
12
10 ⁄ ”
171⁄ 2”
18”
25⁄ 16”
27⁄ 8”
Part # 471222
Part # 471333
29⁄ 16”
21⁄ 16”
11⁄ 2”
Art Nouveau Style
Right Hand Grip
Part # 471333
Octagon Style
Part # 471222
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
56
2008 dimension
6/19/09
4:07 PM
Page 57
Brass Tubular Entryset Sectional, Single Cylinder
Saratoga (4410), Knoxville (4310), Hamden (4213), Nashville (4312)
• Standard Door Thickness: 13⁄ 4”- 21⁄ 8”
• 11⁄ 2” Rosette Screws
• Single Cylinder Tailpiece
• Outside Entry Spindle
• Inside Passage Half Spindle
• 21 ⁄ 4” Deadbolt Mounting Screws
• Full-Lip Strike Plate
• Deadbolt Strike Plate
• 2” Rosette Screws
• Long Single Cylinder Tailpiece
• Long Outside Entry Spindle
• Long Inside Passage Half Spindle
• 3” Deadbolt Mounting Screws
• Spindle Extensions
• Extended Full-Lip Strike Plate
• Extended Door Thickness: 25⁄ 8”- 3”
• Extra Long Single Cylinder Tailpiece
• Extra Long Inside Passage Half Spindle
• 31⁄ 2” Deadbolt Mounting Screws
Brass Tubular Entryset Sectional, Double Cylinder
Saratoga (4420), Knoxville (4320), Hamden (4223), Nashville (4322)
• Double Cylinder Tailpiece
• 21 ⁄ 4” & 21 ⁄ 2 Deadbolt Mounting Screws
• Long Double Cylinder Tailpiece
• Extra Long Double Cylinder Tailpiece
* Part # DB4-COLLAR32 Available for 13 ⁄ 8” Thick Doors
Brass Tubular Entryset Monolithic, Single Cylinder
Marietta (4411), Marietta 6” (4412), Orleans (4311), Arts & Crafts (4811), Valley Forge (4111), Wilshire (4211),
Melrose (4212), Oval Ribbon & Reed (4714), Ribbon & Reed (4711), Imperial (4911), Zeus (4814), Richmond (4313)
Brass Tubular Entryset Monolithic, Double Cylinder
Marietta (4421), Marietta 6” (4422), Orleans (4321), Arts & Crafts (4821), Valley Forge (4121), Wilshire (4221),
Melrose (4212), Oval Ribbon & Reed (4724), Ribbon & Reed (4721), Imperial (4921), Zeus (4824), Richmond (4323)
57
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 58
Wrought Steel Tubular Entryset Sectional, Single Cylinder
Lafayette (461212), San Carlos (461222), Normandy (461232)
Wrought Steel Tubular Entryset Sectional, Double Cylinder
12
• Extra Long Double Cylinder Tailpiece
Wrought Steel Tubular Entryset Monolithic, Single Cylinder
Wrought Steel Tubular Entryset Monolithic, Double Cylinder
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
58
2008 dimension
6/19/09
4:07 PM
Page 59
Cast Bronze Tubular Entryset Sectional, Single Cylinder
Denver (451211), Rectangular Sectional (451411), Tuscany Sectional (471224), Laramie (451711)
• 11⁄ 2” & 2” Rosette Screws
Cast Bronze Tubular Entryset Sectional, Double Cylinder
Denver (452211), Rectangular Sectional (452411), Tuscany Sectional (472224), Laramie (452711)
• 2” & 21⁄ 2” Rosette Screws
• 3” & 31⁄ 2” Deadbolt Mounting Screws
Cast Bronze Tubular Entryset Monolithic, Single Cylinder
Remington (451112), Greeley (451332), Rectangular Monolithic (451512), Sheridan (451812)
Rectangular Full Length (451613), Tuscany (471112), Art Nouveau (471333), Octagon (471222), Creston (451913)
Cast Bronze Tubular Entryset Monolithic, Double Cylinder
Remington (452112), Greeley (452332), Rectangular Monolithic (452512), Sheridan (452812)
Rectangular Full Length (452613), Tuscany (472112), Art Nouveau (472333), Octagon (472222), Creston (452913)
59
• 2” & 21 ⁄ 2”Rosette Screws
• 3” & 31 ⁄ 2”Deadbolt Mounting Screws
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 60
Grip-By-Grip Tubular Entryset, Single Cylinder
Denver(454212), Remington(454111), Greeley(454333), Rectangular Sectional(454414),
Rectangular Monolithic(454515), Rectangular Full Length(454636), Tuscany Sectional(474444), Tuscany(474111),
Octagon(474222), Art Nouveau-LH(474333LH), Art Nouveau-RH(474333RH)
• 2” & 21⁄ 2” Rosette Screws
Grip-By-Grip Tubular Entryset, Double Cylinder
Denver(454212), Remington(454111), Greeley(454333), Rectangular Sectional(454414),
Rectangular Monolithic(454515), Rectangular Full Length(454636), Tuscany Sectional(474444), Tuscany(474111),
Octagon(474222), Art Nouveau-LH(474333LH), Art Nouveau-RH(474333RH)
• 21 ⁄ 2” & 3” Deadbolt Mounting Screws
Standard
Heavy Duty
Steel Understrike
Heavy Duty
Full Lip Deadbolt
Understrike
9 16”
⁄
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
60
2008 dimension
61
6/19/09
4:07 PM
Page 61
2008 dimension
6/19/09
4:07 PM
Page 62
62
2008 dimension
63
6/19/09
4:07 PM
Page 63
2008 dimension
6/19/09
4:07 PM
Page 64
64
2008 dimension
65
6/19/09
4:07 PM
Page 65
2008 dimension
6/19/09
4:07 PM
Page 66
66
2008 dimension
6/19/09
4:07 PM
Page 67
For Reference Only
67
2008 dimension
6/19/09
4:07 PM
Page 68
For Reference Only
68
2008 dimension
6/19/09
4:07 PM
Page 69
For Reference Only
(Marietta-6 Style)
69
2008 dimension
6/19/09
4:07 PM
Page 70
(Marietta-6 Style)
For Reference Only
70
2008 dimension
6/19/09
4:07 PM
Page 71
DECORATIVE BRASS DEADBOLTS
Regular Style
13⁄ 8”
23⁄ 8” Dia.
21⁄ 2” Dia.
Exterior Trim (8450)
• Projection is 13 ⁄ 16”
• 8350 same on both sides
Interior Trim (8450)
• Thickness is 5 ⁄ 16”
Low Profile Style
13⁄ 8”
*23⁄ 4”
21⁄ 2” Dia.
38
**2 ⁄ ”
* 23⁄ 4” Diameter with Exterior ring
** 23 ⁄ 8” Diameter without Exterior ring
• Projection with Exterior ring: 7⁄ 8”
• Projection without Exterior ring: 5⁄ 8”
• 8355 same both sides
13⁄ 8”
Rope Style
34
*2 ⁄ ”
**23⁄ 8”
* 21⁄ 2” Diameter with Exterior ring
• Projection with ext. ring: 11⁄ 16”
• Projection without ext. ring: 1⁄ 2”
21⁄ 2” Dia.
71
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 72
#8 Style
13⁄ 8”
35⁄ 8”
35⁄ 8”
21⁄ 2”
21⁄ 2”
• Projection is 1⁄ 2”
Rectangular Style
23⁄ 4”
23⁄ 4”
13⁄ 8”
27⁄ 16”
27⁄ 16”
• Thickness is 9⁄ 32”
Saratoga Style
35⁄ 8”
13⁄ 8”
35⁄ 8”
21⁄ 2”
21⁄ 2”
13⁄ 8” Dia.
Modern Style
23⁄ 8” Dia.
23⁄ 8” Dia.
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
72
2008 dimension
6/19/09
4:07 PM
Page 73
Knoxville Style
13⁄ 8”
35⁄ 8”
35⁄ 8”
21⁄ 2”
21⁄ 2”
13⁄ 8”
Arts & Crafts Style
21⁄ 2”
21⁄ 2”
21⁄ 2”
21⁄ 2”
13⁄ 8”
Square Style
21⁄ 2”
21⁄ 2”
21⁄ 2”
21⁄ 2”
73
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 74
SANDCAST BRONZE DEADBOLTS
13⁄ 8”
Regular Style
23⁄ 8”
21⁄ 2” Dia.
• Projection is 1”
With #1 Style Plate and Flap
37⁄ 16”
37⁄ 16”
23⁄ 8”
23⁄ 8”
31⁄ 2”
31⁄ 2”
25⁄ 8”
25⁄ 8”
3”
3”
27⁄ 16”
27⁄ 16”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
74
2008 dimension
6/19/09
4:07 PM
Page 75
LOST WAX CAST BRONZE DEADBOLTS
Tuscany Deadbolt
38
1 ⁄ ”
*23⁄ 4”
21⁄ 2”
38
**2 ⁄ ”
* 23 ⁄ 4” Diameter with Exterior ring
• Projection with ext. ring: 1”
Tuscany Classic Deadbolt
38
1 ⁄ ”
*23⁄ 4”
21⁄ 2”
38
**2 ⁄ ”
* 23 ⁄ 4” Diameter with Exterior ring
• Projection with ext. ring: 1”
Octagon Style Deadbolt
13⁄ 8”
23⁄ 8”
21⁄ 2”
75
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 76
LOST WAX CAST BRONZE DEADBOLTS
#11 Style Deadbolt
37⁄ 16”
37⁄ 16”
27⁄ 16”
27⁄ 16”
8372 same both sides
#14 Style Deadbolt
35⁄ 8”
35⁄ 8”
21⁄ 2”
21⁄ 2”
8373 same both sides
13⁄ 8”
Art Nouveau Style Deadbolt
21⁄ 2”
25⁄ 16”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
76
2008 dimension
6/19/09
4:07 PM
Page 77
WROUGHT STEEL DEADBOLTS
#1 Style Deadbolt
13⁄ 8”
37⁄ 16”
35⁄ 8”
29⁄ 16”
21⁄ 2”
#2 Style Deadbolt
38
23⁄ 8”
2 ⁄ ”
#3 Style Deadbolt
31⁄ 2”
31⁄ 2”
21⁄ 2”
21⁄ 2”
Standard
77
Heavy Duty
Steel Understrike
Heavy Duty
Full Lip Deadbolt
Understrike
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 78
Brass Regular Style Deadbolt, Single Cylinder
Regular Style (8450)
• Standard Door Thickness: 13⁄ 8”- 21 ⁄ 8”
• 21⁄ 2” & 3” Deadbolt Mounting Screws
Brass Regular Style Deadbolt, Double Cylinder
Regular Style (8350)
• Double Cylinder Tailpieces
• Long Double Cylinder Tailpieces
Brass Low Profile & Rope Style Deadbolt, Single Cylinder
Low Profile (8455) & Rope Style (8464)
Brass Low Profile & Rope Style Deadbolt, Double Cylinder
Low Profile (8355) & Rope Style (8364)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
78
2008 dimension
6/19/09
4:07 PM
Page 79
Brass Deccorative Deadbolt, Single Cylinder
Style #8 (8466), Arts & Crafts (8454), Rectangular (8468), Saratoga (8458) & Knoxville (8459)
Brass Deccorative Deadbolt, Double Cylinder
Style #8 (8366), Arts & Crafts (8354), Rectangular (8368), Saratoga (8358) & Knoxville (8359)
Brass Modern Deadbolts, Single Cylinder
Modern Style (8467) & Square Style (8469)
Brass Modern Deadbolts, Double Cylinder
Modern Style (8367) & Square Style (8369)
79
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 80
Bronze Regular Style Deadbolt, Single Cylinder (8450BZ)
• 21⁄ 4” & 21⁄ 2” Deadbolt Mounting Screws
Bronze Regular Style Deadbolt, Double Cylinder (8350BZ)
• 3”& 31⁄ 2” Deadbolt Mounting Screws
• Extended Door Thickness Not Available for this Model
Bronze Decorative Deadbolts, Single Cylinder
#1 (8457), #3 (8465), #4 (8474)
Bronze Decorative Deadbolts, Double Cylinder
#1 (8357) , #3 (8365), #4 (8374)
• 21⁄ 4” & 21⁄ 2” Deadbolt Mounting Screws
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
80
2008 dimension
6/19/09
4:07 PM
Page 81
Bronze Tuscany & Tuscany Classic Style Deadbolt, Single Cylinder
Tuscany (8456) & Tuscany Classic (8471)
Bronze Tuscany & Tuscany Classic Style Deadbolt, Double Cylinder
Tuscany (8356) & Tuscany Classic (8371)
Lost Wax Cast Bronze Deadbolts, Single Cylinder
Octagon (8460), Art Nouveau (8470), #11 Style (8472), #14 Style (8473)
Lost Wax Cast Bronze Deadbolts, Double Cylinder
Octagon (8360), Art Nouveau (8370), #11 Style (8372), #14 Style (8373)
• 21⁄ 4” & 21⁄ 2”Deadbolt Mounting Screws
81
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 82
Wrought Steel #2 Style Deadbolt, Single Cylinder (8352)
Wrought Steel #2 Style Deadbolt, Double Cylinder (8350)
Wrought Steel #1 & #3 Style Deadbolt, Single Cylinder (8461 & 8463)
• Standard Door Thickness: 13⁄ 8”- 21⁄ 8
• Extended Door Thickness: 21⁄ 8- 27⁄ 8”
• Extended Door Thickness: 27⁄ 8”- 33⁄ 8
Wrought Steel #1 & #3 Style Deadbolt, Double Cylinder (8361 & 8363)
• 21⁄ 4” & 3”Deadbolt Mounting Screws
Brass, Bronze & Wrought Steel Single-Sided Deadbolts
• Standard Door Thickness: 15⁄ 8”- 23⁄ 8
• Extended Door Thickness: 23⁄ 8- 23⁄ 4”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
82
2008 dimension
83
6/19/09
4:07 PM
Page 83
2008 dimension
6/19/09
4:07 PM
Page 84
84
2008 dimension
85
6/19/09
4:07 PM
Page 85
2008 dimension
6/19/09
4:07 PM
Page 86
86
2008 dimension
6/19/09
4:07 PM
Page 87
DECORATIVE PLATE LOCKS
COLONIAL STYLE
Plates are 3 ⁄ 8” thick
13⁄ 4”
39⁄ 16”
18
7 ⁄ ”
71⁄ 8”
Non-Keyed
Passage (8010)
Privacy (8020)
Dummy (8001)
Keyed
Single Cylinder (8060)
Double Cylinder (8160)
Dummy (8065)
Non-Keyed
Passage (8711)
Privacy (8811)
Dummy (8851)
Keyed
Dummy (8995)
Non-Keyed
Passage (8102)
Privacy (8202)
Dummy (8075)
Keyed
Dummy (8075)
13⁄ 4”
27⁄ 16”
27⁄ 16”
13⁄ 4”
9”
9”
31⁄ 4”
13⁄ 4”
27⁄ 16”
27⁄ 16”
BELMONT STYLE
115⁄ 16”
12
115⁄ 16”
12
7 ⁄ ”
7 ⁄ ”
115⁄ 16”
27⁄ 16”
27⁄ 16”
87
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 88
QUINCY STYLE
17⁄ 8”
17⁄ 8”
71⁄ 8”
18
7 ⁄ ”
Non-Keyed
Passage (8104)
Privacy (8204)
Dummy (8054)
Keyed
Dummy (8085)
Non-Keyed
Passage (8704)
Privacy (8804)
Dummy (8854)
Keyed
Dummy (8985)
Non-Keyed
Passage (8103)
Privacy (8203)
Dummy (8053)
Keyed
Dummy (8095)
15⁄ 8”
25⁄ 8”
25⁄ 8”
13⁄ 4”
53⁄ 4”
9”
9”
13⁄ 4”
25⁄ 8”
25⁄ 8”
VICTORIA STYLE
3”
27⁄ 8”
73⁄ 4”
9”
23⁄ 8”
21⁄ 2”
27⁄ 8”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
88
2008 dimension
6/19/09
4:07 PM
Page 89
OVAL BEADED STYLE
23⁄ 8”
21⁄ 8”
7”
8”
21⁄ 4”
211⁄ 16”
211⁄ 16”
Non-Keyed
Passage (8105)
Privacy (8205)
Dummy (8055)
Keyed
Dummy (6015)
TRENTON STYLE
Plates are 1⁄ 2” thick
25⁄ 8”
103⁄ 4”
103⁄ 4”
33⁄ 4”
25⁄ 8”
27⁄ 16”
Non-Keyed
Passage (8109)
Privacy (8209)
Dummy (8059)
27⁄ 16”
Keyed
Dummy (6035)
89
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 90
ROPE STYLE
115⁄ 16”
33⁄ 4”
71⁄ 2”
71⁄ 2”
15⁄ 16”
21⁄ 2”
21⁄ 2”
Keyed
Dummy (7095)
Non-Keyed
Passage (7109)
Privacy (7209)
Dummy (7059)
21⁄ 4”
95⁄ 8”
91⁄ 2”
39⁄ 16”
21⁄ 16”
21⁄ 2”
21⁄ 2”
Non-Keyed
Passage (7710)
Privacy (7810)
Dummy (7850)
Keyed
Dummy (7995)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
90
2008 dimension
6/19/09
4:07 PM
Page 91
111⁄ 16”
71⁄ 2”
71⁄ 2”
21⁄ 2”
111⁄ 16”
27⁄ 16”
27⁄ 16”
Non-Keyed
Passage (8111)
Privacy (8211)
Dummy (8011)
Keyed
Dummy (8012)
13⁄ 4”
9”
9”
31⁄ 4”
27⁄ 16”
13⁄ 4”
27⁄ 16”
Non-Keyed
Passage (8113)
Privacy (8213)
Dummy (8013)
Keyed
Dummy (8014)
91
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 92
#5 STYLE
21⁄ 4”
45⁄ 8”
71⁄ 4”
81⁄ 8”
21⁄ 4”
27⁄ 16”
27⁄ 16”
Non-Keyed
Passage (7107)
Privacy (7207)
Dummy (7057)
Keyed
Dummy (7075)
21⁄ 4”
95⁄ 16”
10”
33⁄ 8”
21⁄ 4”
211⁄ 16”
211⁄ 16”
Non-Keyed
Passage (7707)
Privacy (7807)
Dummy (7757)
Keyed
Dummy (7675)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
92
2008 dimension
6/19/09
4:07 PM
Page 93
RECTANGULAR STYLE
111⁄ 16”
7”
7”
21⁄ 2”
111⁄ 16”
21⁄ 2”
21⁄ 2”
Non-Keyed
Passage (71013)
Privacy (72013)
Dummy (70053)
Keyed
Dummy (7365)
111⁄ 16”
87⁄ 8”
87⁄ 8”
37⁄ 16”
111⁄ 16”
21⁄ 2”
21⁄ 2”
Non-Keyed
Passage (7512)
Privacy (7612)
Dummy (7552)
Keyed
Dummy (7565)
93
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 94
#16 STYLE
Non-Keyed
Passage (6102)
Privacy (6202)
Dummy (6052)
81⁄ 4”
25⁄ 16”
Keyed
Dummy (6025)
81⁄ 4”
31⁄ 8”
25⁄ 16”
27⁄ 16”
27⁄ 16”
25⁄ 16”
Non-Keyed
Passage (6702)
Privacy (6802)
Dummy (6752)
101⁄ 8”
Keyed
Dummy (6625)
18
10 ⁄ ”
31⁄ 8”
25⁄ 16”
27⁄ 16”
27⁄ 16”
WROUGHT STEEL #5 STYLE
13⁄ 4”
Non-Keyed
Passage (7105)
Privacy (7205)
Dummy (7055)
71⁄ 8”
Keyed
Dummy (7015)
71⁄ 8”
29⁄ 16”
13⁄ 4”
27⁄ 16”
27⁄ 16”
• Refer to page 96 & 97 for Door Thickness Specifications
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
94
2008 dimension
6/19/09
4:07 PM
Page 95
Brass Non-Keyed Plates (passage/privacy)
Colonial Style (8010/8020 & 8711/8811), Belmont Style (8102/8202), Quincy Style (8104/8204 & 8704/8804),
Victoria Style (8103/8203), Oval Beaded Style (8105/8205),
Rope Style (7109/7209 & 7710/7810), Modern Style (8111/8112 &8113/8213)
• Privacy Pin (for privacy sets)
• 1” Wood Screws
• Threaded Tubes & Machine Screws
• Extended Door Thickness: 2”- 3”
• Privacy Pin w/ Extensions (for privacy sets)
supplied upon request for Hollow-Core Doors
Brass Keyed Plates, Single Cylinder
Colonial Style (8060/8990), Belmont Style (8070), Quincy Style (8080/8980),
Victoria Style (8090), Oval Beaded Style (6010),
Rope Style (7090/7990), Modern Style (8112/8114)
•
•
•
21⁄ 2” Deadbolt Mounting Screws
Extended Full-Lip Strike Plate
Deadbolt Strike Plate
Brass Keyed Plates, Double Cylinder
Colonial Style (8160/8991), Belmont Style (8071), Quincy Style (8081/8981),
Victoria Style (8091), Oval Beaded Style (6011),
Rope Style (7091/7991), Modern Style (8212/8214)
•
•
•
95
2008 dimension
6/19/09
4:07 PM
Page 96
Trenton Keyed Plates, Single Cylinder (6030)
•
•
•
21⁄ 2” & 3” Deadbolt Mounting Screws
Trenton Style (Brass), Keyed Plates, Double Cylinder (6031)
•
•
•
Full-Lip Strike Plate
Wrought Steel Non-Keyed Plate (passage/privacy) (7105/7205)
• Extended Door Thickness: 13⁄ 4”- 23⁄ 8” • Extended Door Thickness: 13⁄ 4”- 23⁄ 8”
• Privacy Pin w/Extension (for privacy sets) • Privacy Pin w/Extension (for privacy sets)
Wrought Steel #5 Style Keyed Plates, Single Cylinder (7010)
•
•
•
96
2008 dimension
6/19/09
4:07 PM
Page 97
Wrought Steel #5 Keyed Plates, Double Cylinder (7011)
58
• Standard Door Thickness: 1 ⁄ ”- 13⁄ 4”
•
•
•
Cast Bronze Non-Keyed Plates (passage/privacy)
#5 (7107/7207 & 7707/7807), Rectangular Style (71013/72013 & 7512/7612), #16 Style (6102/6202 & 6702/6802)
• Extended Door Thickness: 2”- 3”
• Privacy Pin w/ Extensions (for privacy sets)
Cast Bronze Keyed Plates, Single Cylinder
#5 (7070/7670), Rectangular Style (7360/7560), #16 Style (6020/6620)
•
•
•
•
•
•
Cast Bronze Keyed Plates, Double Cylinder
#5 (7071/7671), Rectangular Style (7361/7561), #16 Style (6021/6621)
•
•
•
97
2008 dimension
6/19/09
4:07 PM
Page 98
98
2008 dimension
99
6/19/09
4:07 PM
Page 99
2008 dimension
6/19/09
4:07 PM
Page 100
100
2008 dimension
101
6/19/09
4:07 PM
Page 101
2008 dimension
6/19/09
4:07 PM
Page 102
102
2008 dimension
6/19/09
4:07 PM
Page 103
THUMBTURN PRIVACY LOCKSET
Thumbturn Privacy Lockset
Used with Emtek Brass Passage Lockset
Thickness is 1⁄ 4”
58
1 ⁄ ”
15⁄ 8”
Projection: 15 ⁄ 16”
11⁄ 4”
11⁄ 4”
Interior
Exterior
• Modified Tailpiece
• Privacy Deadbolt Strike Plate
• Long Modified Tailpiece
• Extra Long Modified Tailpiece
Thumbturn Privacy with Decorative Plate Lock
Belmont (8224), Colonial (8022), Victoria (8225), Quincy (8226), Rope (7211), Oval Beaded (8227)
103
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 104
104
2008 dimension
6/19/09
4:07 PM
Page 105
ROSETTE DIMENSIONS
Forged Brass
9 16
9 16
34
34
2 ⁄ ” Dia.
43⁄ 8”
43⁄ 8”
21⁄ 2”
2 ⁄ ”
2 ⁄ ”
2 ⁄ ” Dia.
34
7 16
⁄ ” Thick
34
2 ⁄ ” Dia.
2 ⁄ ” Dia.
41⁄ 2”
21⁄ 2”
38
Rectangular
21⁄ 2”
⁄ ” Thick
Regular
Rope
#8
Ribbon & Reed
Arts & Crafts
Lancaster
Oval
Porcelain
23⁄ 4”
12
⁄ ” Thick
23⁄ 4” Dia.
7 16
⁄ ” Thick
7 16
⁄ ” Thick
23⁄ 4”
4”
Porcelain
Hammered
Arts & Crafts Rectangular
Modern
34
12
⁄ ” Thick
2 ⁄ ” Dia.
12
⁄ ” Thick 2 ⁄ ” Dia.
38
21⁄ 2”
27⁄ 16” Dia.
38
38
⁄ ” Thick
⁄ ” Thick
21⁄ 2”
Disk Rosette
Modern Rosette
Beveled Rosette
Square Rosette
Sandcast Bronze
All 7⁄ 16” Thick
21⁄ 2”
21⁄ 2”
2 ⁄ ” Dia.
41⁄ 2”
41⁄ 2”
3”
#1
All 7⁄ 16” Thick
21⁄ 2”
23⁄ 8”
58
41⁄ 2”
11
12
29⁄ 16”
All ⁄ ” Thick
⁄ ” Thick
41⁄ 2”
21⁄ 2” Dia.
23⁄ 4” Dia.
15
17
41⁄ 2”
3”
38
12
#4
#2
#3
Lost Wax Cast Bronze
2 ⁄ ” Dia.
14
Wrought Steel
29⁄ 16”
58
2 ⁄ ” Dia.
43⁄ 8”
105
213⁄ 16”
34
• Same dimensions for doorbell buttons
• Screw-to-Screw for rosette/doorbell buttons 15 ⁄ 8”
43⁄ 8”
#1
#2
#3
2008 dimension
6/19/09
4:07 PM
Page 106
CLASSIC FORGED BRASS LEVERSETS
Complete set includes Latch and Strike Plate
11⁄ 8” Clearance
1” Clearance
12
⁄ ” Clearance
2” Projection
11⁄ 8”
43⁄ 8”
41⁄ 2”
Cortina (C)
14
2 ⁄ ” Projection
Aireon (A)
2” Clearance
47⁄ 16”
Rope (RL)
41⁄ 4”
41⁄ 2”
45⁄ 8”
Rustic (R)
Turino (T)
Milano (M)
Brass Passage & Privacy Sets (Knobs & Levers)
• Privacy Pin w/ Extension (for privacy sets) • Privacy Pin w/ Extension (for privacy sets)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
106
2008 dimension
6/19/09
4:07 PM
Page 107
DESIGNER FORGED BRASS LEVERSETS
2” Clearance
1” Clearance
53⁄ 8”
45⁄ 8”
43⁄ 4”
Elan (EN)
Lafayette (LB)
43⁄ 4”
Ribbon & Reed (RBL)
Santa Fe (SF)
12
⁄ ” Clearance
2” Projection
41⁄ 2”
Wembley (WM)
107
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 108
CLASSIC FORGED BRASS KNOBSETS
23⁄ 8” Dia.
21⁄ 4” Dia.
14
21⁄ 2”
1” Stem
11⁄ 2”
1” Stem
1” Stem
Egg (E)
Waverly (W)
Rope (RK)
21⁄ 4” Dia.
25⁄ 16” Dia.
14
2 ⁄ ”
1” Stem
11⁄ 2”
Victoria (V)
1” Stem
Belmont (BT)
Providence (P)
23⁄ 8” Dia.
78
5 16
2 ⁄ ”
11⁄ 2”
1” Stem
1” Stem
Melon (MN)
Beaded Egg (BE)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
108
2008 dimension
6/19/09
4:07 PM
Page 109
MODERN COLLECTION - KNOB/LEVERSETS
1” Clearance
411⁄ 16”
59⁄ 32”
Basel (BA)
Geneva (GV)
2”
21⁄ 4” Dia.
Bern (BN)
1” Stem
Octagon (OCT)
1” Stem
21⁄ 4”
21⁄ 4”
Dia.
1” Stem
21⁄ 4”
Square (SQU)
1” Stem
Round (ROU)
109
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 110
MODERN COLLECTION - KNOB/LEVERSETS
Hermes (HER)
Clearance:13⁄ 8”
45⁄ 8”
Sion (SIO)
Poseidon (POS)
Kiel (KIE)
Clearance:13⁄ 8”
Hercules (HEC)
Stuttgart (STU)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
110
2008 dimension
6/19/09
4:07 PM
Page 111
MODERN COLLECTION - BRASS AND GLASS LEVER AND KNOBSETS
43⁄ 4”
37⁄ 8”
Mode (MD)
Luzern (LU)
51⁄ 8”
5”
Electra Blue (ECB)
Electra Frost (ECF)
Mercury (MC)
21 ⁄ 4” Dia.
2” Dia.
12
⁄ ” Stem
Orb (OR)
1” Stem
Zurich Frost (ZF)
Zurich Blue (ZB)
111
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 112
DESIGNER BRASS KNOBSETS
27⁄ 16” Dia.
Dog (DG)
21⁄ 4” Dia.
1” Stem
27⁄ 16” Dia.
Ribbon & Reed (RBK)
1” Stem
Lancaster (LN)
25⁄ 16” Dia.
1” Stem
Academia (AD)
1” Stem
25⁄ 16” Dia.
1” Stem
Rialto (RT)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
112
2008 dimension
6/19/09
4:07 PM
Page 113
ARTS & CRAFTS KNOB AND LEVERSETS
2” Clearance
21⁄ 2”
43 ⁄ 8”
43 ⁄ 8”
11⁄ 2”
1” Stem
113
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 114
HARRISBURG LEVERSETS AND MADISON KNOBSETS
Wrought Steel Levers and Porcelain Knobs with Wrought Steel Rosettes
21⁄ 4” Dia.
5”
1” Stem
Black Madison (MB)
Harrisburg (HL)
21⁄ 4” Dia.
21⁄ 4” Dia.
1” Stem
1” Stem
Brown Swirl Madison (MS)
Ivory Madison (IM)
Wrought Steel Passage & Privacy Sets (Knobs & Levers)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
114
2008 dimension
6/19/09
4:07 PM
Page 115
WROUGHT STEEL KNOBS AND LEVERSETS
3” Projection
11 ⁄ 2” Clearance
11⁄ 4” Stem
6”
Lafayette (L)
2” Clearance
21 ⁄ 4” Dia.
Jamestown (J)
41 ⁄ 2”
Normandy (N)
38
⁄ ” Thickness
34
⁄ ” Stem
3” Projection
21 ⁄ 2”
11 ⁄ 2”
43⁄ 4”
Savannah (SV)
San Carlos (SC)
Wrought Steel Passage & Privacy Sets (Knobs & Levers)
(includes porcelain knobs using steel rosettes)
115
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 116
SANDCAST BRONZE KNOB AND LEVERSETS
25⁄ 16” Dia.
3” Projection
3” Projection
23⁄ 4”
11 ⁄ 2” Stem
5”
11 ⁄ 8” Stem
11⁄ 2”
Butte (BU)
Durango (D)
Bronze Egg (BZE)
23⁄ 8” Dia.
11 ⁄ 4” Stem
47⁄ 8”
5”
Teton (TT)
Cody (CD)
Winchester (WC)
213⁄ 16”
41⁄ 2”
34
13 16
⁄ ” Thick
⁄ ” Thick
13 16
⁄ ” Thick
47⁄ 8”
47⁄ 8”
Montrose (MT)
Rosette Thickness:
Cimarron (CR)
51⁄ 8”
Aurora (AR)
12
⁄ ”
Cast Bronze Passage & Privacy Sets (Knobs & Levers)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
116
2008 dimension
6/19/09
4:07 PM
Page 117
LOST WAX CAST BRONZE KNOB AND LEVERSETS
38
12
2 ⁄ ”
78
⁄ ” Stem
11⁄ 2”
41⁄ 2”
Parma (PA)
Napoli (NA)
211⁄ 32” Dia.
13⁄ 4”
43⁄ 4”
1” Stem
Padua (PD)
Art Nouveau (ANK)
21⁄ 4” Dia.
27⁄ 8”
Projection
15 ⁄ 16” Stem
45⁄ 8”
Octagon (OCK)
Art Nouveau (ANL)
117
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 118
LOST WAX CAST BRONZE KNOB AND LEVERSETS
21⁄ 4” Dia.
58
47⁄ 8”
1” Stem
Petal (PT)
Dakota (DK)
413⁄ 16”
41⁄ 2”
Medici (MDI)
Octagon (OCL)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
118
2008 dimension
6/19/09
4:07 PM
Page 119
PORCELAIN KNOBSETS WITH BRASS AND PORCELAIN ROSETTES
23 ⁄ 8” Dia.
23 ⁄ 8” Dia.
23 ⁄ 8” Dia.
23 ⁄ 8” Dia.
Bedford (BD)
23 ⁄ 8” Dia.
23 ⁄ 8” Dia.
11⁄ 4” Stem
Devonshire (DV)
Courtney (CTY)
23 ⁄ 8” Dia.
14
11⁄ 4” Stem
11⁄ 4” Stem
11⁄ 4” Stem
Ice White (IW)
3
21⁄ 4” Projection 2 ⁄ 8” Dia.
11⁄ 4” Stem
11⁄ 4” Stem
Olde Gold (OG)
Ebony (EB)
11⁄ 4” Stem
11⁄ 4” Stem
Stoneware (ST)
Almond (AL)
(includes crystal & porcelain knobs using brass rosettes)
119
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 120
CRYSTAL KNOBSETS
21⁄ 4” Dia.
21⁄ 4” Dia.
23 ⁄ 16” Dia.
2” Dia.
34
11 16
⁄ ” Stem
Astoria - Clear (AS)
Diamond Crystal - Clear (CK)
58
11 16
⁄ ” Stem
Astoria - Emerald (ASE)
⁄ ” Stem
Old Town - Milk (OT)
Old Town - Clear (OT)
21⁄ 4” Dia.
21⁄ 4” Dia.
2” Dia.
11 16
⁄ ” Stem
11 ⁄ 4” Stem
11 16
11 16
11 16
⁄ ” Stem
⁄ ” Stem
Old Town - Amber (OT)
Old Town - Violet (OTV)
(includes crystal & porcelain knobs using brass rosettes)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
120
2008 dimension
121
6/19/09
4:07 PM
Page 121
2008 dimension
6/19/09
4:07 PM
Page 122
122
2008 dimension
123
6/19/09
4:07 PM
Page 123
2008 dimension
6/19/09
4:07 PM
Page 124
124
2008 dimension
6/19/09
4:07 PM
Page 125
STAINLESS STEEL ENTRANCE HANDLESETS
27⁄ 8”
21⁄ 16”
25⁄ 8”
27⁄ 8”
101⁄ 4”
101⁄ 4”
23⁄ 8”
Part # S40001/S40002/4814/4824
2”
11⁄ 2”
Zeus Style
Part #
S40001/S40002/4814/4824
Additional Dimensions: (Part # S40001/S40002)
• Clearance between door & grip ranges 1” - 13⁄ 8”
• Refer to the following page for Door Thickness Specifications
125
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 126
STAINLESS STEEL ENTRYSET SPECIFICATIONS
Door Prep Specifications:
• Fits standard door prep--21 ⁄ 8” face bore & 1” edge bore.
• Fits a range of door thickness from 13 ⁄ 8” to 2”. (21 ⁄ 4”- 23⁄ 4”, Please specify)
• 51 ⁄ 2” Center to Center spacing.
Latches:
Legend
Passage:
•
•
•
•
•
•
28º retraction
7MM hub
Split spindles
23 ⁄ 8” backset standard
23 ⁄ 4” backset available--please specify
Stainless steel nosebolt
Deadbolt:
• Hardened Steel Bolt
• 23 ⁄ 8” backset standard
• 23 ⁄ 4” backset available--please specify
Strike & Face Plates:
•
•
•
•
•
1) Passage Latch
2) Deadbolt Latch
3) Outside Handle Plate
4) Inside Plate
5) Deadbolt Mounting Plate
6) Deadbolt Machine Screws
7) Inside Spindle
8) Inside Plate Machine Screws
9) Decorative Cap
10) Handle Grip Machine Screw
11) Designer Washer
12) Latch Face Plate
13) Latch Wood Screws
14) Deadbolt Cylinder
Full Lip strike is standard (passage function)
“T” strike optional--please specify (passage function)
Strike & faceplates are square cornered
Passage: Strike Plate--11 ⁄ 2”W x 21 ⁄ 4”H, Deadbolt:11 ⁄ 8”W x 23⁄ 4”H (understrike supplied)
Passage: Face Plate--1”W x 21 ⁄ 4”H, Deadbolt:1”W x 21⁄ 4”H (attached to latch)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
126
2008 dimension
127
6/19/09
4:07 PM
Page 127
2008 dimension
6/19/09
4:07 PM
Page 128
128
2008 dimension
129
6/19/09
4:07 PM
Page 129
2008 dimension
6/19/09
4:07 PM
Page 130
STAINLESS STEEL DEADBOLTS
Round Deadbolt
Single Cylinder
Part # S50001
Round Deadbolt
Double Cylinder
Part # S50002
Square Deadbolt
Single Cylinder
Part # S50003
Square Deadbolt
Double Cylinder
Part # S50023
EPITOME Round & Square Deadbolts, Single Cylinder
Round (S50001) & Square (S50003)
• 21⁄ 4” Socket Head Machine Screws
• Long Cylinder Tailpiece
• 21⁄ 2” & 3” Socket Head Machine Screws
• Extra Long Cylinder Tailpiece
EPITOME Round & Square Deadbolts, Double Cylinder
Round (S50002) & Square (S50023)
• 3” Socket Head Machine Screws
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
130
2008 dimension
6/19/09
4:07 PM
Page 131
EPITOME DEADBOLT SPECIFICATIONS
• Fits a range of door thickness from 13 ⁄ 8” to 2”. Thicker doors--please specify.
Single Cylinder Deadbolt
Legend
1) Deadbolt Cylinder
2) Outside Rosette
3) Deadbolt Latch
4) Inside Rosette with Thumbturn
5) Socket Head Machine Screws
6) Deadbolt Ring (for Thinner Doors)
Double Cylinder Deadbolt
Legend
1) Outside Double Deadbolt Cylinder
2) Outside Rosette
3) Outside Deadbolt Ring (for Thinner
Doors)
4) Deadbolt Latch
5) Inside Deadbolt Ring (for Thinner
Doors)
6) Inside Rosette
7) Inside Double Deadbolt Cylinder
8) Socket Head Machine Screws
Latches:
Deadbolt:
•
•
•
•
131
Hardened Steel Bolt
Heavy gauge steel understrike and brass
trim strike supplied
•
•
•
•
•
Strike Plate-- 11 ⁄ 8”W x 23 ⁄ 4”H
Face Plate-- 1”W x 21 ⁄ 4”H (attached to latch)
Understrike Plate--11 ⁄ 8”W x 23 ⁄ 4”H
See page 17 for detailed diagram
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 132
132
2008 dimension
133
6/19/09
4:07 PM
Page 133
2008 dimension
6/19/09
4:07 PM
Page 134
134
2008 dimension
6/19/09
4:07 PM
Page 135
STAINLESS STEEL LEVERSETS
Cologne (CO)
Stuttgart (ST)
Kiel (KL)
Achilles (AC)
135
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 136
STAINLESS STEEL LEVERSETS
Athena (AT)
Ajax (AJ)
Hercules (HS)
Poseidon (PO)
Hermes (HE)
38
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
136
2008 dimension
6/19/09
4:07 PM
Page 137
STAINLESS STEEL LEVER & KNOBSETS
Comet (CT)
Meteor (MT)
21⁄ 4” Dia.
1” Stem
21⁄ 4” Dia.
1” Stem
Octagon Knob (OK)
Round Knob (RK)
38
137
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 138
STAINLESS STEEL LEVERSET SPECIFICATIONS
Functions:
Passage: Lever operates from either side of door.
Privacy: Push button on the interior engages privacy. Turning the inside lever releases
privacy and retracts latchbolt.
Dummy Pair: Surface mounted on threaded spindle. Requires no door prep.
• Fits a range of door thickness from 13 ⁄ 8” to 2”. Thicker doors--please specify.
Privacy Function Shown
Latches:
•
•
•
•
•
•
28º retraction
7MM hub
Split spindles
Stainless steel nosebolt
•
•
•
•
•
Strike Plate--11 ⁄ 2”W x 21 ⁄ 4”H
Face Plate--1”W x 21 ⁄ 4”H
Full Lip strike is standard
“T” strike optional--please specify
Legend
1) Latch (Passage/Privacy)
2) Lever Handles
3) Spindles
4) Face Plate Wood Screws
5) Socket Hex Head Machine Screws
6) Inside Rosette
7) Privacy Pin (for Privacy Sets)
8) Outside Rosette
9) Set Screws
10) Spindle Spring
11) Latch Face Plate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
138
2008 dimension
139
6/19/09
4:07 PM
Page 139
2008 dimension
6/19/09
4:07 PM
Page 140
140
2008 dimension
6/19/09
4:07 PM
Page 141
STAINLESS STEEL LATCH & STRIKE SPECIFICATIONS
PRIVACY LATCH
“Full Lip” Strike
“T” Strike
Standard
Optional
PASSAGE LATCH
Faceplate
To reverse nose bolt, turn faceplate
DEADBOLT
Understrike
141
Trim Strikeplate
Faceplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 142
STAINLESS STEEL BATH HARDWARE
Towel Bar 18”-- S7010SS
Towel Ring -- S7300SS
Bar Style Paper Holder -- S7210SS
Spring Rod Paper Holder -- S7220SS
Robe Hook with Disk Rosette -- S7100SS
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
142
2008 dimension
143
6/19/09
4:07 PM
Page 143
2008 dimension
6/19/09
4:07 PM
Page 144
144
2008 dimension
145
6/19/09
4:07 PM
Page 145
2008 dimension
6/19/09
4:07 PM
Page 146
STAINLESS STEEL CABINET PULLS
Knob (T-Pull), 2”
Pull with Two Legs, 3” thru 36”
Pull with Three Legs, 46” thru 54”
Specification Drawing
A.
B.
Spec.
Drawing
A
Knob
B
Pull,3”
1
B
Pull,3 ⁄ 2”
B
Pull,4”
B
Pull,5”
B
Pull,6”
B
Pull,8”
B
Pull,10”
B
Pull,12”
B
Pull,16”
B
Pull,24”
B
Pull,28”
B
Pull,32”
B
Pull,36”
C
Pull,46”
C
Pull,54”
Description
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
Cabinet
C.
Product Code
Center to Center
S62001SS
S62002SS
S62003SS
S62004SS
S62005SS
S62006SS
S62007SS
S62008SS
S62009SS
S62010SS
S62011SS
S62012SS
S62013SS
S62014SS
S62015SS
S62016SS
3”
31 ⁄ 2”
4”
5”
6”
8”
10”
12”
16”
24”
28”
32”
36”
46”
54”
Overall Length
2”
5”
51 ⁄ 2”
61 ⁄ 2”
71 ⁄ 2”
81 ⁄ 2”
101 ⁄ 2”
121 ⁄ 2”
141 ⁄ 2”
181 ⁄ 2”
261 ⁄ 2”
301 ⁄ 2”
341 ⁄ 2”
381 ⁄ 2”
481 ⁄ 2”
561 ⁄ 2”
*Each pull packed with two sets of screws (11 ⁄ 8” & 11 ⁄ 2” , 8” - 32”)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
146
2008 dimension
6/19/09
4:07 PM
Page 147
STAINLESS CABINET PULLS
Delta Pull 3”
S60030SS
Delta Pull 3.5”
S60035SS
Delta Pull 4”
S60040SS
Dome Knob
Mushroom Knob
147
S61113SS
S61213SS
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 148
BRASS TRAIL PULLS
All Projections are 13⁄ 8”
11 16
⁄ ”
11 16
⁄ ”
Brass Trail Pull, 31 ⁄ 2”
Description
Trail Pull
3” C-to-C
Trail Pull
31 ⁄ 2” C-to-C
Trail Pull
4” C-to-C
Trail Pull
6” C-to-C
Trail Pull
8” C-to-C
Trail Pull
12” C-to-C
Product Code
Overall Length
86161
31 ⁄ 2”
86162
4”
86163
41 ⁄ 2”
86164
61 ⁄ 2”
86165
81 ⁄ 2”
86166
121 ⁄ 2”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
148
2008 dimension
6/19/09
4:07 PM
Page 149
BRASS CABINET PULLS
All Items Are Solid Forged Brass
All 3⁄ 4” thick
All 7⁄ 16” thick
11⁄ 2”
A
A
Spindle Pull
Rope Pull
• 3” Pull *(86125): A= 31 ⁄ 2”
• 3” Pull *(86128): A= 35⁄ 8”
• 31 ⁄ 2” Pull *(86126): A= 4”
• 31 ⁄ 2” Pull *(86129): A= 41⁄ 8”
• 4” Pull *(86127): A= 41 ⁄ 2”
• 4” Pull *(86130): A= 45⁄ 8”
*Sizes are measured screw to screw
Projection = 17⁄ 32”
Clearance = 7 ⁄ 8”
Clearance = 1”
51⁄ 4”
Cup Pull (86173)
Clearance = 13⁄ 16”
3” Screw-to-Screw
B
All 5⁄ 16” thick
15⁄ 16”
D
A
C
A
Wire Pull
41⁄ 4”
Footed Pull
Cup Pull (86123)
• 3” Pull *(86131): A= 35⁄ 16”
• 3” Pull *(86134): A= 51⁄ 8”, B= 15⁄ 16”, C= 3⁄ 4”, D= 9⁄ 16”
• 31 ⁄ 2” Pull *(86132): A= 313⁄ 16”
• 31 ⁄ 2” Pull *(86135): A= 55⁄ 8”, B= 15⁄ 16”, C= 7⁄ 8”, D= 5⁄ 8”
• 4” Pull *(86133): A= 45⁄ 16”
• 4” Pull *(86136): A= 61⁄ 8”, B= 15⁄ 16”, C= 7⁄ 8”, D= 5⁄ 8”
3” Screw-to-Screw
*Sizes are measured screw to screw *Sizes are measured screw to screw
14
Projection = 1 ⁄ ”
Clearance =
Projection = 1”
15 16
⁄ ”
Clearance =
11 16
⁄ ”
MODERN CABINET HARDWARE
All 3⁄ 8” thick
A
11⁄ 8” Dia.
1” Dia.
B
A
Arch Drawer Pull
• 3” Pull *(86153): A= 413⁄ 16”
• 31 ⁄ 2” Pull *(86154): A= 55⁄ 16”
• 4” Pull *(86155): A= 513⁄ 16”
Small (86150): A=1”, B=7 ⁄ 8”
Large (86151): A=11 ⁄ 4”, B=1”
Projection = 13 ⁄ 16”
Clearance =
149
Modern Finger Pull
Modern Cabinet Globe Knob
Part #: (86152)
Projection: 15⁄ 8”
Stem Diameter: 1 ⁄ 2”
13 16
⁄ ”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 150
BRASS CABINET AND WARDROBE KNOBS
All Items Are Solid Forged Brass
B
A
A
A
12
⁄ ” Dia.
Egg Cabinet Knob
• 1” Cab. Knob (86015): A=
Providence Cabinet Knob
34
⁄ ”,
B=
Rope Cabinet Knob
• 1” Cab. Knob (86112): A= 5⁄ 8”
58
12
⁄ ”
• 1” Cab. Knob (86013): A= ⁄ ”
Projection: 11 ⁄ 8”, Clearance= 1 ⁄ 2”
Projection: 1”, Clearance= ⁄ ”
Projection: 1”, Clearance= 5⁄ 8”
• 11 ⁄ 4” Cab. Knob (86016): A= 3 ⁄ 4”, B= 9⁄ 16”
• 11 ⁄ 4” Cab. Knob (86014): A= 5⁄ 8”
• 11 ⁄ 4” Cab. Knob (86113): A= 5⁄ 8”
7 16
3 16
Projection: 11 ⁄ 4”, Clearance= 9⁄ 16”
•
13 ⁄ 4”
Projection: 1 ⁄ ”, Clearance= ⁄ ”
Wrd. Knob (86124): A= 1”, B=
13 16
⁄ ”
•
13 ⁄ 4”
Wrd. Knob (86027): A=
• 1” Cab. Knob (86114): A= 5⁄ 8”
Projection: 1 ⁄ ”, Clearance=
Projection: 1 ⁄ ”, Clearance=
A
Hexagon Cabinet Knob
• 1” Cab. Knob (86121): A= 3⁄ 4”
11 16
58
• 11 ⁄ 4” Cab. Knob (86122): A=
⁄ ”
Cab. Knob (86115): A= ⁄ ”
18
⁄ ”
Melon Cabinet Knob
Waverly Cabinet Knob
•
⁄ ”
13 16
A
A
11 ⁄ 4”
11 16
Projection: 11⁄ 2”, Clearance= 7⁄ 8”
1 16
Projection: 13⁄ 16”, Clearance=
9 16
11 16
⁄ ”
• 11 ⁄ 8” Cab. Knob (86119): A= 3⁄ 4”
12
38
13 16
• 13⁄ 8” Cab. Knob (86120): A= 7⁄ 8”
⁄ ”
34
DOG CABINET KNOBS
Dachshund (86108)
Chihuahua (86107)
Beagle (86111)
Labrador (86110)
58
Projection = 1 ⁄ ”
German Shepherd
(86109)
34
Clearance = ⁄ ”
Base = 3⁄ 4” Diameter
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
150
2008 dimension
6/19/09
4:07 PM
Page 151
ARTS & CRAFTS STYLE CABINET HARDWARE
All Items Are Solid Brass
13⁄ 16”
12
2 ⁄ ”
1 ⁄ ”
13⁄ 4”
3”
Hammered Oval Pull (86041)
Projection =
3 16
12
⁄ ”
31⁄ 2”
13⁄ 4”
Hammered Ring Pull (86040)
Projection =
Ring = 5 ⁄ 16” thick
11⁄ 2”
11⁄ 4”
Hammered Vertical Ring Pull (86042)
12
⁄ ”
58
⁄ ”
13 16
15⁄ 16”
⁄ ”
A
A
Tenon & Mortise Pull
31⁄ 2”
Hammered Pull
Bin Pull (46049)
• 3” Pull *(86043): A= 33⁄ 8”
• 3” Pull *(86046): A= 37⁄ 8”
• 31 ⁄ 2” Pull *(86044): A= 37⁄ 8”
• 31 ⁄ 2” Pull *(86047): A= 47⁄ 8”
Clearance =
• 4” Pull *(86045): A= 4 ⁄ ”
• 4” Pull *(86048): A= 4 ⁄ ”
A
34
⁄ ”
Round Dimpled Knob (86037)
⁄ ”
3” from screw to screw
78
38
13 16
Square Dimpled Knob
Projection = 1”
• 1” Cab. Knob (86038) : A= 5⁄ 8”
Projection = 3⁄ 4”, Clearance = 9⁄ 16”
• 11 ⁄ 4” Cab. Knob (86039) : A= 3⁄ 4”
Projection =
151
15 16
⁄ ”, Clearance = 3⁄ 4”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 152
WROUGHT STEEL CABINET HARDWARE
A
A
15 16
⁄ ”
2”
A
9 16
78
⁄ ”
⁄ ”
Lafayette Fixed Drawer Pull
Lafayette Drop Drawer Pull
San Carlos Fixed Drawer Pull
Satin Steel
Flat Black
Rust
• 3” Pull *(76025): A= 37⁄ 16”
• 4” Pull *(76032): A= 411⁄ 16”
• 3” Pull *(76026): A= 35⁄ 16”
• 31 ⁄ 2” Pull *(76019): A= 315⁄ 16”
• 5” Pull *(76033): A= 53⁄ 4”
• 31 ⁄ 2” Pull *(76021): A= 313⁄ 16”
• 4” Pull *(76020): A= 4 ⁄ ”
• 6” Pull *(76034): A= 6 ⁄ ”
• 4” Pull *(76022): A= 45⁄ 16”
7 16
14
Projection =
Projections: 1 ⁄ ”
Clearance =
58
Projections: 15⁄ 16”
13 16
⁄ ”
15 16
⁄ ”
Clearance = 1”
A
A
A
17⁄ 16”
58
⁄ ”
9 16
⁄ ”
58
15⁄ 8”
⁄ ”
San Carlos Drop Drawer Pull
Normandy Fixed Drawer Pull
Normandy Drop Drawer Pull
Flat Black
Satin Steel
Flat Black
• 4” Pull *(76038): A= 41⁄ 2”
• 3” Pull *(76027): A= 37⁄ 16”
• 4” Pull *(76035): A= 41⁄ 2”
• 5” Pull *(76039): A= 51⁄ 2”
• 31 ⁄ 2” Pull *(76023): A= 315⁄ 16”
• 5” Pull *(76036): A= 51⁄ 2”
7 16
• 6” Pull *(76040): A= 6 ⁄ ”
• 4” Pull *(76024): A= 4 ⁄ ”
• 6” Pull *(76037): A= 61⁄ 2”
12
Projections:
⁄ ”
Projections:
38
Clearance = 1”
13 16
Clearance = 1 ⁄ ”
13 16
⁄ ”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
152
2008 dimension
6/19/09
4:07 PM
Page 153
WROUGHT STEEL CABINET HARDWARE
Flanders Cabinet Knob
• 11 ⁄ 4” Cab. Knob (76011): A= 5⁄ 8”
• 11 ⁄ 2” Cab. Knob (76012): A= 3⁄ 4”
A
Petal Cabinet Knob
• 1” Cab. Knob (76013): A= 9⁄ 16”
A
• 11 ⁄ 4” Cab. Knob (76014): A= 3⁄ 4”
11 16
⁄ ”
Brittany Cabinet Knob
• 1” Cab. Knob (76015): A= 9⁄ 16”
A
• 11 ⁄ 4” Cab. Knob (76016): A= 3⁄ 4”
11 16
⁄ ”
Bastogne Cabinet Knob
A
B
•
23 ⁄ 8”
Cab. Knob (76017): A= 3⁄ 8”, B= 7 ⁄ 8”
• 33⁄ 8” Cab. Knob (76018): A= 1⁄ 2”, B= 13⁄ 16”
153
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 154
SANDCAST BRONZE CABINET HARDWARE
All Items Are Solid Cast Bronze
Bronze Egg Knob
A
• 1” Cab. Knob (86052): A= 1⁄ 2”, B= 7 ⁄ 8”
B
11 16
⁄ ”
14
• 1 ⁄ ” Cab. Knob (86053): A= 1⁄ 2”, B=
58
15 16
⁄ ”
34
Bronze Round Knob
Square Cabinet Knob
• 1” Cab. Knob (86057): A= 1⁄ 2”
• 1” Cab. Knob (86145): A= 1⁄ 2”
A
A
• 11 ⁄ 4” Cab. Knob (86058): A= 1⁄ 2”
• 15⁄ 8” Cab. Knob (86146): A= 5⁄ 8”
• 13⁄ 4” Wrd. Knob (86117): A= 5⁄ 8”
Bronze Bin Pulls (86051)
5 16
1 ⁄ ”
Projection = 1”
Clearance =
13 16
⁄ ”
31⁄ 2”
Bronze Bin Pulls (86050)
78
⁄ ”
9 16
4 ⁄ ”
B
Twig Pulls
• 3” Pull *(86061): A= 4”, B= 1”
38
⁄ ”
• 31 ⁄ 2” Pull *(86062): A= 49⁄ 16”, B= 3 ⁄ 8”
• 4” Pull *(86063): A= 5”, B= 3 ⁄ 8”
A
Clearance =
13 16
⁄ ”
Bronze Rod Pulls
B
• 3” Pull *(86054): A= 4”, B= 1”
5 16
⁄ ”
• 31 ⁄ 2” Pull *(86055): A= 41⁄ 2”, B= 1”
• 4” Pull *(86056): A= 5”, B= 1”
A
Clearance =
15 16
⁄ ”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
154
2008 dimension
6/19/09
4:07 PM
Page 155
LOST WAX CAST BRONZE CABINET HARDWARE
A
A
B
Tuscany Round Knob
A
Tuscany Egg Knob
Tuscany Petal Knob
• 1” Cab. Knob (86091): A= 5⁄ 8”
• 1” Cab. Knob (86093): A= 5⁄ 8”, B= 5⁄ 8”
• 1” Cab. Knob (86095): A= 5⁄ 8”
•
11 ⁄ 4”
14
11 16
Cab. Knob (86092): A=
• 1 ⁄ ” Cab. Knob (86094): A= ⁄ ”, B=
⁄ ”
• 1 ⁄ ” Wrd. Knob (86116): A=
13 16
⁄ ”
34
34
34
13 16
• 1 ⁄ ” Wrd. Knob (86143): A=
⁄ ”
•
11 ⁄ 4”
⁄ ”
Cab. Knob (86096): A= 3⁄ 4”
13 16
11 16
11 16
18
⁄ ”, B= 1 ⁄ ”
15⁄ 8”
A
A
47⁄ 16”
Tuscany Bin Pull
Octagon Knob
• 1” Cab. Knob (86137): A= 3⁄ 4”
Part #: (86199)
Art Nouveau Knob
•
• 11 ⁄ 4” Cab. Knob (86138): A=
Projection: 11⁄ 8, Clearance= 3⁄ 4”
13 16
⁄ ”
11 ⁄ 4”
Cab. Knob (86139): A= 1⁄ 2”
34
⁄ ”
B
13⁄ 8”
12
⁄ ”
A
Tuscany Twist Pull
34
34
9 16
• 1 ⁄ ” Pull (86097): A= ⁄ ”, B= ⁄ ”
Projections: 11⁄ 4”, Clearance =
• 3” Pull (86098): A=
13 16
11 16
⁄ ”
9 16
⁄ ”, B= ⁄ ”
58
Projections: 1 ⁄ ”, Clearance =
31⁄ 2”
Art Nouveau Pull
15 16
⁄ ”
Tuscany Bin Pull
• 3” Pull *(86140): A= 33⁄ 4”
Part #: (86099)
• 31 ⁄ 2” Pull *(86141): A= 41⁄ 4”
• 4” Pull *(86142): A= 43⁄ 4”
11 16
11 16
⁄ ”
⁄ ”
7 16
⁄ ”
12
⁄ ”
A
Tuscany Ribbed Pull
• 3” Pull *(86100): A= 311⁄ 16”
•
31 ⁄ 2”
18
Pull *(86101): A= 4 ⁄ ”
11 16
• 3” Pull *(86103): A= 311⁄ 16”
• 31 ⁄ 2” Pull *(86104): A= 41⁄ 8”
• 4” Pull *(86102): A= 4 ⁄ ”
• 4” Pull *(86105): A= 411⁄ 16”
Projections: 11⁄ 78
Clearance =
155
A
Tuscany Twist Pull
11 16
⁄ ”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
⁄ ”
2008 dimension
6/19/09
4:07 PM
Page 156
PORCELAIN & GLASS CABINET HARDWARE
A
B
Madison Ivory
Cabinet and Wardrobe Knobs
• 1” Cab. Knob (86071, 86072 & 86073): A= 3⁄ 4”
13 16
⁄ ”
34
• 1 ⁄ ” Wrd. Knob (86074, 86075 & 86076): A= 7⁄ 8”
Porcelain 13 ⁄ 8” Diameter
Ice White
Olde Gold
Stoneware
Almond
Devonshire
Bedford
Courtney
Ebony
•
13 ⁄ 8”
86001
86002
86004
86005
86006
86007
86008
86009
A
Porcelain
12
• 13 ⁄ 4” Wrd. Knob: A= 11⁄ 2”
Cab. Knob: A= 1 ⁄ ”
18
Projection: 111⁄ 16”, Clearance= 1”
Projection: 2”, Clearance= 1 ⁄ ”
A
A
Old Town
• 1” Cab. Knob: A=
Old Town Wardrobe (86028)
11 16
⁄ ”
• 13 ⁄ 4” Wrd. Knob: A= 13⁄ 4”
12
• 11 ⁄ 4” Cab. Knob: A=
Porcelain Wardrobe 13 ⁄ 4” Diameter
Ice White
86034
Olde Gold
86035
Stoneware
86036
Almond
86029
Devonshire
86032
Bedford
86030
Courtney
86031
Ebony
86033
Projection: 15⁄ 8”, Clearance= 1”
13 16
⁄ ”
C
B
A
A
Astoria Emerald Drawer Pull
Clear (86018), Emerald (86026), Milk (86067)
• A= 313⁄ 16”
• 11⁄ 8” Cab. Knob: A=
• B = 11⁄ 4”
13 16
⁄ ”
14
Projection: 1 ⁄ ”, Clearance= 5⁄ 8”
• C = 5 ⁄ 8”
Astoria Cabinet Knob
Clear (86017), Emerald (86025)
13 16
⁄ ”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
156
2008 dimension
157
6/19/09
4:07 PM
Page 157
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 158
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
158
2008 dimension
159
6/19/09
4:07 PM
Page 159
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 160
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
160
2008 dimension
6/19/09
4:07 PM
Page 161
DOOR ACCESSORIES
BRASS 8” PULLS-BRASS PUSH AND PULL PLATES
A
Ribbon & Reed Pull
(86080)
Wilshire Pull (86078)
Knoxville Pull (86077)
13⁄ 8”
A
A 11⁄ 8”
1”
A 15⁄ 16”
11⁄ 8”
A
Lafayette Brass Pull
(86118)
Arts & Crafts Pull
(86079)
A= 813⁄ 16”
A= 87⁄ 8”
A= 815⁄ 16”
A= 813⁄ 16”
A= 87⁄ 8”
18
Base: 3⁄ 4” Diameter
Base: 1 ⁄ ” Diameter
A
Base: 1” Diameter
34
Base: ⁄ ” Diameter
A
Screw Specifications - Brass 8” Pulls
• 1”, 10-32 Screws
• 1”, 14-20 Screws
• Inserts for 14-20 screws
B
12”
B
12”
8”
3”
3”
161
Knoxville Push (86081)
Plate
Knoxville Pull Plate (86082)
Plate only
drilled to accept 8” pull
A= 21⁄ 8” Screw-to-Screw
A= 21⁄ 8” Screw-to-Screw
B= 111⁄ 8” Screw-to-Screw
B= 111⁄ 8” Screw-to-Screw
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 162
CAST BRASS DOOR PULLS
A
A
B
A
21⁄ 2”
11⁄ 2”
B
A
B
B
12
1 ⁄ ”
2”
Rope Style (86064)
Spindle Style (86065)
Scroll Style (86066)
A = 18”
A = 18”
B = 12 ⁄ ” Screw-to-Screw
B = 16” Screw-to-Screw
B = 47⁄ 32” Screw-to-Screw
Projection: 4”
Base: W = 3”, H = 15⁄ 8”
Base: 25⁄ 8” Squared
A = 18”
14
Rope Style (86083)
A = 24”
Projection: 4”
Screw Specifications - Brass 18” & 24” Pulls
Base: 25⁄ 16” Squared
• #10, 1” Wood Screws
Screw Specifications - Brass 12” Pulls
• 1”, 10-32 Screws
12”
C-to-C
1”
13”
Overall
12”
C-to-C
13 ⁄ 4” 123 ⁄ 4”
Overall
18
12” 1 ⁄ ”
C-to-C
123 ⁄ 4”
Overall
• 1”, 14-20 Screws
Wilshire Pull
PVD-Lifetime
Knoxville Pull
PVD-Lifetime
Arts & Crafts Pull
Oil Rubbed Bronze
12
38
Clearance: 13⁄ 8”
Clearance: 1 ⁄ ”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
162
2008 dimension
6/19/09
4:07 PM
Page 163
8”, 18” AND 24” WROUGHT STEEL PULLS
C
8” Screw-to-Screw
B
A
A
1”
A
15⁄ 16”
11⁄ 16”
Normandy (76031)
Lafayette (76030)
13 16
A = 813⁄ 16”
A=8 ⁄ ”
12
San Carlos 8” (76028)
12
Projection: 2 ⁄ ”
34
34
A = 121⁄ 4”, B = 21 ⁄ 2”, C = 11 ⁄ 8”
33⁄ 16”
Screw Specifications
Wrought Steel 8” Pulls
• 1”, 10-32 Screws
• 1”, 14-20 Screws
13⁄ 8”
Wrought Steel 18” & 24 Pulls
38
1 ⁄ ”
A
A
A = 143⁄ 4” Screw-to-Screw
3”
Projection: 3”
33⁄ 16”
San Carlos, 18” (76029)
163
Projection: 3”
San Carlos, 24” (76041)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 164
SANDCAST BRONZE AND LOST WAX CAST DOOR PULLS
8” Screw-to-Screw
18” Screw-to-Screw
1”
34
⁄ ”
A
A
A
8” Bronze (86090)
B
11⁄ 4”
8” Bronze (86088)
A = 913⁄ 16”
13 16
A=9 ⁄ ”
Projection: 3”
Base Diameter: 113⁄ 16”
78
Base Diameter: ⁄ ”
Cast Bronze 8” Pulls
A = 211⁄ 16” B = 18”
• 1”, 10-32 Screws
Base Diameter: 3”
Cast Bronze 18” Pulls
• 1”, 14-20 Screws
8” Tuscany Pull
Fits Door Thickness 1-3 ⁄ 8” to 2-1 ⁄ 4”
3”
18” Bronze Rod
8” Screw-to-Screw
B
B
Base:13⁄ 4” Dia.
13 16
Base: ⁄ ”
Decorative Cap
A
Threaded
Washer
Thru Bolt
34
⁄ ”
11⁄ 16”
Threaded Tube
(attached)
Art Nouveau 8” Pull
• 11 ⁄ 2”, 8-32 Screws
Left Hand
Right Hand
A = 93⁄ 16” B = 17⁄ 16”
8”
C-to-C
97⁄ 8”
Overall
12”
C-to-C
133⁄ 4”
Overall
Bronze 8” Nunez Pull
Bronze 12” Rod Pull
• 1”, 10-32 Screws
• 1”, 14-20 Screws
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
164
2008 dimension
6/19/09
4:07 PM
Page 165
LOST WAX CAST DOOR PULLS - PUSH & PULL PLATES
3”
3”
23 ⁄ 4”
3”
A
A
A
14”
B
8”
91⁄ 4”
14”
11”
8”
B
8”
A = 3⁄ 4”
Tuscany Petal Pull Plate
13 16
Base = 11⁄ 4”
A=
Squared
Base = 11⁄ 4”
⁄ ”
Squared
Tuscany Petal Push Plate
4”
4”
Base: 13⁄ 16”
103⁄ 8”
Overall
Base: 11⁄ 4” x 11⁄ 4”
Base: 11⁄ 4” Dia.
Base: 11⁄ 4” x 11⁄ 4”
1”
8”
C-to-C 91 ⁄ 4” 11⁄ 16”
Overall
8”
C-to-C 131⁄ 4”
1”
12”
1”
C-to-C
C-to-C
Overall
12”
A
A
24”
18”
Tuscany 8” Recoleta Pull
Tuscany 8” Palermo Pull
13⁄ 16”
13 16
13⁄ 16”
• 1”, 10-32 Screws
• 1”, 14-20 Screws
Tuscany 12” Twist Pull Tuscany 12” Twist Pull
Projection: 3”
13 16
Clearance: 2”
8” Tuscany Twist - (86069)
8” Tuscany Column - (86156)
Tuscany Petal Push Plate - (86181)
Tuscany Petal Pull Plate - (86182)
18” Column Pull - (86157)
24” Column Pull - (86158)
165
Tuscany 18” Column Pull
Supplied with
#10 wood screws.
Base = 2”L, 23⁄ 4”W
Tuscany 24” Column Pull
Supplied with
#10 wood screws.
Base = 2”L, 23⁄ 4”W
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 166
166
2008 dimension
167
6/19/09
4:07 PM
Page 167
2008 dimension
6/19/09
4:07 PM
Page 168
168
2008 dimension
169
6/19/09
4:07 PM
Page 169
2008 dimension
6/19/09
4:07 PM
Page 170
170
2008 dimension
6/19/09
4:07 PM
Page 171
SOLID BRASS DOOR ACCESSORIES
4”
Round Flush Pull (2211)
Rectangular Flush Pull (2201)
21⁄ 2” Dia.
13⁄ 4”
3” (2232) & 4” (2231)
4”
Door Stop
Base = 11⁄ 4”
Edge Pull with Screws (2221)
34
⁄ ”
13⁄ 8”
1”
1”
111⁄ 16”
21⁄ 8”
21⁄ 8”
2-1⁄ 4”
33 ⁄ 8”
Ball Catch
with Strike & Screws (8802)
Roller Catch
with Strike & Screws (8801)
23⁄ 8”
12
⁄ ”
11 32
⁄ ”
34
⁄ ”
13⁄ 4”
171
5 16
⁄ ”
Extended Button Tip
(2242)
Hinge Pivot Stop
(2241)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 172
SOLID BRASS DOOR ACCESSORIES
21⁄ 2”
21⁄ 2”
Pocket Door Mortise Locks
Keyed - part# (2103)
71⁄ 2”
Passage - part# (2104)
71⁄ 2”
Privacy - part# (2105)
41⁄ 2”
41⁄ 2”
Dummy - part# (2106)
• Fits standard door tickness 1-3⁄ 8” to 13⁄ 4” ( Must Specify Door Thickness)
• Plates are 1⁄ 16” Thick
Solid Brass Door Viewer
(2610)
Half Dome Door Stop
(2251)
Goose Style Door Stop
(2253)
1”
1” Dia.
5⁄ 8”
11⁄ 2”
7⁄ 8”
13⁄ 8”
13 ⁄ 16”
21⁄ 2”
• Fits standard door tickness 1-3 ⁄ 8” to 2”
( not available for thicker door)
1” Projection (tall)
27⁄ 8” Tall
13 16
1 ⁄ ” Base Diameter
172
2008 dimension
6/19/09
4:07 PM
Page 173
DOOR ACCESSORIES
Solid Brass Surface Bolts
Surface Bolt 6” (8511)
with 3 Strikes & Screws
Supplied With Matching Screws & Lighted Button
17⁄ 8”
11⁄ 4”
78
⁄ ”
Lip Strike
(Side of Door)
34
23⁄ 4”
2”
⁄ ”
15⁄ 16”
11⁄ 4”
1”
11⁄ 4”
1”
15⁄ 8”
11⁄ 4”
Screw to Screw:
17⁄ 8”
17⁄ 8”
Mortise Strike
(Bottom of Door)
Angle Strike
(Top of Door)
21⁄ 8” Projection from bracket
when thrown
15 ⁄ 8”
Screw to Screw: 21⁄ 4”
Small Oval Style
(2462)
Small #1 Style
(2461)
*Note:
These are the dimensions for
these two styles only. All other
doorbell button rosettes are the
same dimensions as the
passage/privacy rosettes.
Screen Door Locksets
Arch Style
Brass (2290)
Bronze (2290)
6”
113⁄ 16”
11 ⁄ 4”
9 16
Exterior
1 ⁄ ” Projection from bracket
when thrown
1”
Interior
Rectangular Style
Brass (2291)
Bronze (2291)
13⁄ 8” C-to-C
6”
11 ⁄ 4”
Exterior
Exterior & Interior
11⁄ 4” Dia.
Surface Bolt 18” (8513), 12” (8512)
with 3 Strikes & Screws
173
Interior
Lever Length: 25⁄ 8”
Knob Diameter: 111⁄ 16”
Door Thickness Specifications: 1”-13⁄ 4”
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 174
DOOR ACCESSORIES
Solid Brass Casement Latches
Standard (8703)
11⁄ 16”
1”
Large (8713)
21⁄ 16”
15 ⁄ 8”
23⁄ 4”
13⁄ 8”
1”
11⁄ 2”
7 16
⁄ ”
34
⁄ ”
Flush Bolts
1” Bolt
Patio Door Bolts, Keyed
206011
Silver
206012
Bronze
206016
White
206017
Black
2”
11⁄ 4”
1”
34
Non-Keyed
206511
Silver
206512
Bronze
206516
White
⁄ ”
34
3 ⁄ ”
6”
38
⁄ ”
Square Corner (8501)
1 ⁄ 4” Radius (8502)
5 16
⁄ ”
POCKET DOOR LOCKS
Strike Plate
(for privacy only)
11⁄ 16”
31⁄ 2”
31⁄ 2”
2”
29⁄ 16”
5 16
⁄ ”
23⁄ 8”
23⁄ 8”
2” Screw-to-Screw
1 16
⁄ ”
Passage Function
• Fits door thickness 13/8” to 13/4”
• Standard rectangular door prep
3 1/8” x 13/4”
Thick
Privacy Function
• Fits door thickness 13/8” to 13/4”
• Standard rectangular door prep
3 1/8” x 13/4”
• Complete with strikeplate
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
174
2008 dimension
6/19/09
4:07 PM
Page 175
BRASS HOUSE NUMBERS
Supplied With Matching Screws
Brass 4”
Width: 21 ⁄ 4”
4”(2814), 6”(2820)
4”(2815), 6”(2825)
Thickness: 3 ⁄ 16”
4”(2811), 6”(2821)
4”(2816), 6”(2826)
4”(2812), 6”(2822)
Brass 6”
4”(2817), 6”(2827)
Width: 23⁄ 4”
4”(2813), 6”(2823)
4”(2814), 6”(2824)
4”(2818), 6”(2828)
4”(2819), 6”(2829)
BRONZE HOUSE NUMBERS
Bronze 4”
4”(2810), 6”(2820)
Width: 31 ⁄ 4”
4”(2815), 6”(2825)
4”(2816), 6”(2826)
4”(2811), 6”(2821)
4”(2812), 6”(2822)
Bronze 6”
Width: 45⁄ 8”
4”(2813), 6”(2823)
175
4”(2814), 6”(2824)
4”(2817), 6”(2827)
4”(2818), 6”(2828)
4”(2819), 6”(2829)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 176
DOOR ACCESSORIES
Switch Plates Forged Brass - Colonial Design
Includes 1 ⁄ 2” &
34
⁄ ”
6-32 Machine Screws
All Plates approx. 1⁄ 4” Thick
Description
45⁄ 8” H x 27⁄ 8” W
Toggle 1, Colonial Switch
(29111)
(29112)
(29113)
(29114)
Plate
45⁄ 8” Squared
45⁄ 8” H x 63⁄ 8” W
45⁄ 8” H x 81⁄ 4” W
Plate
Plate
Plate
45⁄ 8” H x 27⁄ 8” W
Rocker 1, Colonial Switch
(29121)
(29122)
(29123)
(29124)
Plate
45⁄ 8” Squared
45⁄ 8” H x 63⁄ 8” W
45⁄ 8” H x 81⁄ 4” W
Plate
Plate
Plate
45⁄ 8” Squared
45⁄ 8” H x 27⁄ 8” W
Duplex 1, Colonial Switch Plate
(29131)
Duplex 2, Colonial Switch Plate
(29132)
45⁄ 8” H x 63⁄ 8” W
45⁄ 8” Squared
45⁄ 8” Squared
Toggle 1, Duplex 1
(29141)
Toggle 2, Duplex 1
(29142)
Rocker 1, Duplex 1
(29143)
45⁄ 8” H x 27⁄ 8” W
14
3 ⁄ ” C-to-C
45⁄ 8” H x 27⁄ 8” W
38
⁄ ” Dia.
Colonial Blank Plate
(29151)
Colonial Cable Plate
(29161)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
176
2008 dimension
6/19/09
4:07 PM
Page 177
DOOR ACCESSORIES
Switch Plates Forged Brass - Rope Design
Includes 1 ⁄ 2” &
34
⁄ ”
6-32 Machine Screws
51⁄ 8” H x 3” W
Description
Toggle 1, Rope Switch
(29211)
(29212)
(29213)
(29214)
Plate
Plate
Plate
Plate
51⁄ 8” H x 45⁄ 8” W
51⁄ 8” H x 61⁄ 2” W
51⁄ 8” H x 89⁄ 32” W
51⁄ 8” H x 3” W
Rocker 1, Rope Switch Plate
(29221)
(29222)
(29223)
(29224)
51⁄ 8” H x 45⁄ 8” W
51⁄ 8” H x 61⁄ 2” W
51⁄ 8” H x 89⁄ 32” W
51⁄ 8” H x 45⁄ 8” W
51⁄ 8” H x 3” W
Duplex 1, Rope Switch Plate
(29231)
Duplex 2, Rope Switch Plate
(29232)
51⁄ 8” H x 61⁄ 2” W
51⁄ 8” H x 45⁄ 8” W
Toggle 1, Duplex 1
(29241)
Toggle 2, Duplex 1
(29242)
Rocker 1, Duplex 1
(29243)
51⁄ 8” H x 3” W
31⁄ 4” C-to-C
51⁄ 8” H x 45⁄ 8” W
Rope Blank Plate
(29251)
51⁄ 8” H x 3” W
38
⁄ ” Dia.
177
Rope Cable Plate
(29261)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:07 PM
Page 178
DOOR ACCESSORIES
Switch Plates Cast Bronze
Includes 1 ⁄ 2” & 3 ⁄ 4” 6-32 Machine Screws
Description
45⁄ 8” H x 27⁄ 8” W
Toggle 1, Bronze Switch
(29311)
(29312)
(29313)
(29314)
45⁄ 8” H x 63⁄ 8” W
45⁄ 8” Squared
45⁄ 8” H x 63⁄ 8” W
45⁄ 8” H x 81⁄ 4” W
Plate
Plate
Plate
Plate
45⁄ 8” H x 27⁄ 8” W
Rocker 1, Bronze Switch
(29321)
(29312)
(29313)
(29314)
45⁄ 8” Squared
Plate
45⁄ 8” H x 81⁄ 4” W
Plate
Plate
Plate
45⁄ 8” Squared
45⁄ 8” H x 27⁄ 8” W
Duplex 1, Bronze Switch Plate
(29331)
Duplex 2, Bronze Switch Plate
(29332)
45⁄ 8” Squared
Toggle 1, Duplex 1
(29341)
Toggle 2, Duplex 1
(29342)
Rocker 1, Duplex 1
(29343)
45⁄ 8” H x 63⁄ 8” W
45⁄ 8” Squared
45⁄ 8” H x 27⁄ 8” W
31⁄ 4” C-to-C
Bronze Blank Plate
(29351)
45⁄ 8” H x 27⁄ 8” W
38
⁄ ” Dia.
Bronze Cable Plate
(29361)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
178
2008 dimension
6/19/09
4:08 PM
Page 179
DOOR ACCESSORIES
Brass Mail Slot (2280)
12
2 ⁄ ” S-to-S
12” S-to-S
58
⁄ ” Projection
Note: Mail flap is spring
loaded on the exterior
and swing loosely on the
33⁄ 8”
interior. Both exterior and
interior trims have the same
dimensions.
131⁄ 16”
Brass Door Knockers (2620)
313⁄ 16”
71⁄ 2”
Urn Style
Note: We recommend that US3 finish be selected for those who intend to have the door
knocker engraved. Emtek does not offer engraving services at this time
71⁄ 2”
23⁄ 4”
713⁄ 16”
15⁄ 16”
Narrow Style (2621)
S Style (2622)
Bronze Door Knockers
2”
3” Door Knocker (86059)
2”
4” Door Knocker (86060)
Sized by ring diameter
Base thickness = 7 ⁄ 16”
11⁄ 2”
Projection: 11 ⁄ 2”
Bronze Door Knockers and Ring Pulls
179
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:08 PM
Page 180
180
2008 dimension
181
6/19/09
4:08 PM
Page 181
2008 dimension
6/19/09
4:08 PM
Page 182
182
2008 dimension
183
6/19/09
4:08 PM
Page 183
2008 dimension
6/19/09
4:08 PM
Page 184
184
2008 dimension
185
6/19/09
4:08 PM
Page 185
2008 dimension
6/19/09
4:08 PM
Page 186
186
2008 dimension
187
6/19/09
4:08 PM
Page 187
2008 dimension
6/19/09
4:08 PM
Page 188
188
2008 dimension
189
6/19/09
4:08 PM
Page 189
2008 dimension
6/19/09
4:08 PM
Page 190
190
2008 dimension
191
6/19/09
4:08 PM
Page 191
2008 dimension
6/19/09
4:08 PM
Page 192
192
2008 dimension
193
6/19/09
4:08 PM
Page 193
2008 dimension
6/19/09
4:08 PM
Page 194
194
2008 dimension
195
6/19/09
4:08 PM
Page 195
2008 dimension
6/19/09
4:08 PM
Page 196
196
2008 dimension
197
6/19/09
4:08 PM
Page 197
2008 dimension
6/19/09
4:08 PM
Page 198
198
2008 dimension
199
6/19/09
4:08 PM
Page 199
2008 dimension
6/19/09
4:08 PM
Page 200
200
2008 dimension
201
6/19/09
4:08 PM
Page 201
2008 dimension
6/19/09
4:08 PM
Page 202
202
2008 dimension
203
6/19/09
4:08 PM
Page 203
2008 dimension
6/19/09
4:08 PM
Page 204
BRASS BATH ACCESSORIES
33⁄ 8”
4”
1” S-to-S
65⁄ 16”
13⁄ 4”
11⁄ 2”
Double Hook (2609)
Brass Towel Ring (2601)
Brass Robe Hook (2606)
Brass Towel Bar 18”(26021), 24”(26022), 30”(26023)
11 16
⁄ ” Dia.
11⁄ 2”
11 16
⁄ ” Dia.
34
⁄ ” S-to-S
13⁄ 4”
3”
4”
37⁄ 16”
11 16
⁄ ” Dia.
Double Hook (2607)
Brass Double Towel Bars 18”(26031), 24”(26032), 30”(26033)
13 16
⁄ ”
11⁄ 8” Dia.
7 16
⁄ ” Thick
Single Hook Post (2608)
61⁄ 4”
Brass Paper Holder Style 2 (2605)
63⁄ 8”
Brass Paper Holder Style 1 (2604)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
204
2008 dimension
6/19/09
4:08 PM
Page 205
WROUGHT STEEL BATH ACCESSORIES
58
⁄ ” Dia.
Wrought Steel Towel Bar
9”
34
⁄ ”
81⁄ 8”
Wrought Steel Spring Rod Style Paper Holder
(2504)
Wrought Steel Bar Style Paper Holder
(2503)
15⁄ 16”
37⁄ 8”
11⁄ 2”
12
⁄ ” Thick
12
6 ⁄ ” Dia.
3” Projection
Wrought Steel Towel Ring
(2501)
13 16
⁄ ” Screw-to-Screw
Wrought Steel Robe Hook
(25050)
Notes:
Rosette size same as on passage sets.
205
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:08 PM
Page 206
TUSCANY BATH ACCESSORIES
58
⁄ ” Dia.
Tuscany Towel Bar
18”(27021), 24”(27022), 30”(27023)
1” Wide
3”
65⁄ 16”
58
⁄ ” Dia.
34
⁄ ”
Tuscany Double Towel Bars
18”(27081), 24”(27082), 30”(27083)
Tuscany Towel Ring
(2701)
63⁄ 8”
13 16
⁄ ”
13 16
⁄ ” Dia.
Projection: 3”
Tuscany Bar Style Paper Holder
Left Hand(2705LH), Right Hand(2705RH)
61⁄ 4”
Cast Bronze Spring Rod Style Paper Holder
(2704)
1” Wide
B
A
C
31⁄ 2”
Tuscany Single Hook (2706)
Notes:
• Rosette size same as on passage sets.
A: 13 ⁄ 4”
B: 11 ⁄ 2”
C: 7 ⁄ 16” Screw-to-Screw
Tuscany Double Hook (2707)
* Base for Dbl. Robe Hook is 13 ⁄ 4” H x 11 ⁄ 2” W
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
206
2008 dimension
6/19/09
4:08 PM
Page 207
SANDCAST BRONZE BATH ACCESSORIES
58
⁄ ” Dia.
Sandcast Bronze Towel Bar
58
⁄ ” Dia.
3”
Sandcast Bronze Double Towel Bar
18”(23051), 24”(23052), 30”(23053)
65⁄ 16”
3” Projection
34
⁄ ”
Sandcast Bronze Towel Ring
(2301)
207
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:08 PM
Page 208
SANDCAST BRONZE BATH ACCESSORIES
13 16
⁄ ” Dia.
13 16
⁄ ” Dia.
61⁄ 2”
61⁄ 4”
Projection: 3”
Sandcast Bronze Bar Style Paper Holder
(2303)
Sandcast Bronze Spring Rod Style Paper Holder
(2304)
13⁄ 4”
15 16
⁄ ”
34
1 ⁄ ”
11⁄ 2”
Sandcast Bronze Single Post Style Hook
(2308)
39⁄ 16”
Sandcast Bronze Double Hook
(2306)
15 16
⁄ ” Dia.
2”
B
A
41⁄ 4”
C
12”
Sandcast Bronze 3 Hooks
(2307)
11⁄ 2”
A:
13 ⁄ 4”
B: 11 ⁄ 4”
C: 13⁄ 16” Screw-to-Screw
Sandcast Bronze Robe Hook
(86106)
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
208
2008 dimension
209
6/19/09
4:08 PM
Page 209
2008 dimension
6/19/09
4:08 PM
Page 210
210
2008 dimension
211
6/19/09
4:08 PM
Page 211
2008 dimension
6/19/09
4:08 PM
Page 212
212
2008 dimension
213
6/19/09
4:08 PM
Page 213
2008 dimension
6/19/09
4:08 PM
Page 214
SOLID BRASS & PLATED STEEL HINGES
1”
78
⁄ ”
1”
15⁄ 16”
11⁄ 2”
23⁄ 4”
15⁄ 32”
1”
3”
11⁄ 2”
13⁄ 4”
12
38
⁄ ”
⁄ ”
1
1
3 ⁄ 2” x 3 ⁄ 2”
4” x 4”
Brass Residential Duty
Steel Residential Duty
Steel Residential Duty
Square Corner: 96113
14
⁄ ”
Radius: 96123
14
⁄ ”
Radius: 91023
14
⁄ ”
Radius: 91024
: 96133
58
⁄ ”
: 91033
58
⁄ ”
: 91034
58
⁄ ”
Brass Heavy Duty, Plain Bearing
Steel Heavy Duty, Plain Bearing
14
⁄ ”
Radius: 96223
14
⁄ ”
58
⁄ ”
: 96233
Radius: 92023
Steel Heavy Duty, Ball Bearing
Brass Heavy Duty, Ball Bearing
3”
1”
1”
11⁄ 4”
1”
19 ⁄ 32”
111⁄ 32”
11⁄ 4”
1”
31⁄ 2”
2”
11⁄ 4”
1”
13⁄ 4”
12
⁄ ”
12
⁄ ”
1
4” x 4”
Brass Residential Duty
1
4 ⁄ 2” x 4 ⁄ 2”
14
⁄ ”
Radius: 96124
14
⁄ ”
14
⁄ ”
14
⁄ ”
58
⁄ ”
: 96134
Radius: 92024
Radius: 96225
Radius: 92025
14
⁄ ”
Radius: 96224
14
⁄ ”
58
⁄ ”
: 96234
Radius: 94024
14
⁄ ”
Radius: 96425
14
⁄ ”
Radius: 94025
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
214
2008 dimension
6/19/09
4:08 PM
Page 215
SOLID BRASS HINGES
BALL BEARING, EXTRUDED 3 1/2 ” x 3 1/2 ”, 4” x 4”, 4 1/2 ” x 4 1/2 ”, 5” x 5”
5” x 5”
11⁄ 4”
11⁄ 2”
113⁄ 16”
4”
11⁄ 2”
11⁄ 2”
21⁄ 2”
9 16
⁄ ”
1
34
1
3 ⁄ 2” x 3 ⁄ 2”
SPRING HINGES
2 ⁄ ”
3”
4” x 4”
78
⁄ ”
1”
12
1 ⁄ ”
1”
15⁄ 32”
11⁄ 2”
111⁄ 32”
1”
1”
13⁄ 4”
38
⁄ ”
12
⁄ ”
Brass Hinges
Hinges #
96113
96123
96133
96114
96124
96134
96213
96223
96233
96214
96224
96234
96215
96225
96413
96414
96415
96425
96416
215
Description
Steel Plated Hinges
Screw Dimensions
3 1/2”x 3 1/2”
Residential Duty
Plain Bearing
4”x 4”
Residential Duty
Plain Bearing
#9x 3 ⁄ 4”
#9x 3 ⁄ 4”
4”x 4”
Heavy Duty
Plain Bearing
#12x 13 ⁄ 4”
4”x 4” Ball Bearing
41/2”x 4 1/2”
Ball Duty
5”x 5”
Ball Bearing
3 1/2”
#9x 3 ⁄ 4”
91023
Residential Duty
Plain Bearing
4”x 4”
Residential Duty
Plain Bearing
#9x 3 ⁄ 4”
91033
91014
92013
92023
92014
92024
92015
92025
#12x 13 ⁄ 4”
#10x 1”
#12x 13 ⁄ 4”
#12x 13 ⁄ 4”
#12x 13 ⁄ 4”
Screw Dimensions
3 1/2”x
91034
#10x 1”
Description
91013
91024
3 1/2”x 3 1/2”
Heavy Duty
Plain Bearing
41/2”x 4 1/2”
Heavy Duty
Plain Bearing
3 1/2”x 3 1/2”Ball Bearing
Hinges #
94033
94014
94024
94015
94025
3 1/2”x 3 1/2”
Heavy Duty
Plain Bearing
4”x 4”
Heavy Duty
Plain Bearing
41/2”x 4 1/2”
Heavy Duty
Plain Bearing
3 1/2”x 3 1/2”Ball Bearing
#10x 1”
4”x 4” Ball Bearing
41/2”x 4 1/2”
Ball Duty
#12x 11⁄ 4”
#12x 11⁄ 4”
#12x 11⁄ 4”
#10x 1”
#12x 11⁄ 4”
2008 dimension
6/19/09
4:08 PM
Page 216
216
2008 dimension
6/19/09
4:08 PM
Page 217
BALL & STEEPLE TIPS-SOLID BRASS
31/2” & 4” Residential Duty
(97203 & 97204)
12
⁄ ”
11 16
⁄ ”
31/2” H.D & B.B
(97303)
9 16
⁄ ”
34
⁄ ”
7 16
⁄ ” Dia.
12
⁄ ” Dia.
Threading is the same for all solid brass hinge tips
41/2” H.D & B.B
(97305)
4” H.D & B.B
(97304)
19 32
⁄ ”
58
⁄ ”
13 16
⁄ ”
34
⁄ ”
12
⁄ ” Dia.
12
⁄ ” Dia.
31/2” & 4” Residential Duty
(97213 & 97214)
11⁄ 8”
15⁄ 16”
31/2” H.D & B.B
(97313)
11⁄ 8”
13⁄ 8”
12
7 16
⁄ ” Dia.
⁄ ” Dia.
Threading is the same for all solid brass hinge tips
41/2” H.D & B.B
(97315)
4” H.D & B.B
(97314)
11⁄ 8”
13⁄ 8”
12
⁄ ” Dia.
217
11⁄ 8”
13⁄ 8”
12
⁄ ” Dia.
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:08 PM
Page 218
BALL & STEEPLE TIPS - PLATED STEEL
9 16
⁄ ” Dia.
17 32
4” Ball Tip
(94104)
9 32
15⁄ 16”
41/2” Ball Tip
(94105)
⁄ ” Dia.
111⁄ 32”
⁄ ” Pin Dia.
5 16
⁄ ” Pin Dia.
9 16
⁄ ” Dia.
111⁄ 32”
41/2” Ball Tip
(94115)
4” Ball Tip
(94114)
9 32
⁄ ”
⁄ ” Pin Dia.
9 16
31/2” Ball Tip
(94103)
11 16
9 32
⁄ ” Pin Dia.
⁄ ” Dia.
⁄ ” Dia.
⁄ ”
31/2” Ball Tip
(94103)
9 16
9 16
35 64
⁄ ”
9 32
⁄ ” Pin Dia.
5 16
⁄ ” Pin Dia.
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
218
2008 dimension
6/19/09
4:08 PM
Page 219
LIMITED WARRANTY
Emtek Products, Inc. (the “Company”) warrants to the original purchaser that, except for products with Rust, Deep
Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes, the products manufactured by it (the
“Products”) are free of defects in material and workmanship, provided:
1. the Company has been notified within five years of purchase date and has been given the opportunity of inspection
by return of any alleged defective Products to the Company, free and clear of all liens and encumbrances,
transportation prepaid, accompanied by a statement of defects and proof of purchase; and
2. the Product has not been modified, abused, misused or improperly installed, maintained and/or repaired during such
period; and
There is no warranty on Rust, Deep Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes.
The Company shall, at its option, either repair or replace, free of charge, any Products or part thereof found upon the
Company’s inspection, to be so defective, or at the Company’s sole discretion refund the purchase price, less a
reasonable allowance for depreciation, in exchange for the Product.
The Company makes no other warranty, and all implied warranties including any warranty of merchantability or
fitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above.
The Company’s maximum liability hereunder is limited to the purchase price of the product. In no event shall
the Company be liable for any consequential, indirect, incidental or special damages of any nature arising from
the sale or use of the product, whether in contract, tort, strict liability or otherwise.
Notes:
A. Some states do not allow limitations on incidental consequential damages or how long an implied warranty lasts so
that the above limitations may not fully apply.
B. This warranty gives specific legal rights and a buyer may also have other rights which may vary from state to state.
C. For warranty service and shipping instructions contact Emtek Products, Inc. at:
15250 E. Stafford Street, City of Industry, CA 91744, (626)961-0413.
219
EMTEK PRODUCTS INC.
Phone No: (800) 356-2741 • (800) 428-4889 • (626) 961-0413 Fax No: (800) 577-5771 • (626) 336-2812
2008 dimension
6/19/09
4:08 PM
Page 220
EMTEK PRODUCTS INC.
15250 E. Stafford Street
City of Industry, California 91744
Tel: 800-356-2741 • 800-428-4889 • 626-961-0413
Fax: 800-577-5771 • 626-336-2812
www.emtek.com
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and
convenience.
An ASSA ABLOY Group brand

Door Thickness Specifications

Transcription

Similar documents

Traditional Brass Bath Hardware

cabinet and bath hardware

decorative cabinet and bath hardware

DEADBOLTS - SOLID BRASS

Emtek Door Hardware Pricebook

DOOR HARDWARE

Entrance Handlesets - Brass Harrison and Middleton Mortise