regulators

Transcription

regulators
REGULATORS
JO SERIES HIGH PRESSURE PRIMARY REGULATORS
All Chudnow regulators are made of solid brass rod with a stainless steel nozzle, specially compounded seat and diaphragm.
Heavy duty 1/2" CO2 (.825-14) CGA nut and tailpiece with
sintered bronze strainer are standard on LP, MS, and MV series.
All models have 1/4" male flare backchecks. Each pressure range
has its own spring for proper balance between inlet and outlet
pressures. Operating gauges available with 0 to 30-60-100-300
PSI readings on single gauge models and an additional 0-2000
PSI tank pressure gauge on twin gauge models. All primary regulators are equipped with an external safety.
* JOX
GAUGE
300PSI
100 PSI
60 PSI
30 PSI
*JOX designates a basic regulator assembled but without gauges, inlet and outlet fittings. All ports are 1/8"
female pipe threads. When ordering JOX models use JOX as prefix instead of JO, in their respective columns, to
obtain regulator with proper spring tension and required number of ports. Additional ports available.
* JOX
JO-300
JO-100
J0-60
J0-30
*JOX
JO-302
JO-102
J0-62
JO-32
*JOX
JO-3O1
JO-101
JO-61
J0-31
single gauge with outlet opposite gauge
single gauge with
two outlets
* JOX
JO-303
J0-103
J0-63
JO-33
twin gague with
outlet opposite low
single gauge with
outlet opposite inlet
LP SERIES MULTI-PORT SECONDARY REGULATORS
The LP Series regulators are constructed the same as the JO and PM series and can be used as primary regulators if a proper high
pressure line is connected from gas cylinder. They were basically designed for secondary use. 0 to 30-60-100 PSI gauges, 1/4" SAE
backcheck outlet and brackets are standard on all models. LPX models available completely assembled less ass fittings, gauge and
bracket. Use prefix LPX instead of LP for desired stripped models. Follow same procedure as JOX series when ordering . All LP model
regulators are equipped with external safety, same as JO models.
Regulators with 30 PSI gauges are excellent for use with dietetic flavors. If 1/4" SAE tee is require d on inlet, for high
side tap-off , in place of 1/4" /sae standard fitting, suffix LP with letter “T” (Example: LPT60-4 is a 4 flavor regulator with tee on
inlet). All regulators available with left hand inlet. Refer to accessories page.
LPX
1 FLAVOR 2 FLAVORS 3 FLAVORS 4 FLAVORS
GAUGE LPX
LPX
30 PSI
LP30-1 LP30-2
60 PSI
LP60-1 LP60-2
100 PSI
LP100-1 LP100-2
LPX
LPX
LP30-3
LP60-3
LP100-3
5 FLAVORS
LPX
LPX
LP30-4
LP30-5
LP60-4
LP60-5
LP100-4 LP100-5
LP60-1
Phone: (516)-593-4222 / Fax: (516)-593-4156 / sales@chudnowmfg.com
visit us at WWW.CHUDNOWMFG.COM
Page 47
LP100-5