MD 30 MD 20

MD 30
Art. No. 2004
Implantology motor system for two electronic motors, bright backlit LCD display, tube set compartment push-button at the front, 10
individually configurable programs for each motor and advanced
motor management. Userfriendly and solid design, easy to clean.
Technical data
Voltage:
Power consumption:
Motor:
Motor speed range:
Max. motor torque:
Pump performance:
Dimensions control unit:
Weight control unit:
100 V, 115 V, 230 V at 50/60 Hz (switchable)
120 W
Electronic motor, brushless, stainlessteel
300 – 40,000 rpm
8 Ncm
1 – 60 ml/min.
260 x 250 x 110 mm
3.0 kg
Scope of delivery:
• Control unit with integrated pump
• User Manual on CD-ROM
• Electronic motor 21
• Contra angle 20:1
• Vario foot pedal
• Irrigation fluid stand
• Tubing set
• Irrigation fluid, 0.9 % NaCl
• Clip set
• Handpiece cradle
MD 20
Art. No. 2268
67126 EN • NOUVAG AG©, all rights reserved • Subject to change
Implantology motor system for two electronic motors, 3
Programs each motor, LED-Display, integrated cooling system
and foot pedal to control the pump, motor and direction of
rotation.
Technical data
Voltage:
Power consumption:
Motor:
Motor speed range:
Max. motor torque:
Pump performance:
Dimensions control unit:
Weight control unit:
100 V, 115 V, 230 V at 50/60 Hz (switchable)
160 W
Electronic motor, brushless, stainlessteel
500 – 40,000 rpm
8 Ncm
15 – 50 ml/min.
290 x 270 x 145 mm
4.5 kg
Scope of delivery:
• Control unit with integrated pump
• User Manual on CD-ROM
• Electronic motor 31ESS
• Contra angle 32:1
• Vario foot pedal
• Irrigation fluid stand
• Tubing set
• Irrigation fluid, 0.9 % NaCl
• Clip set
• Handpiece cradle
Handpieces and contra angle
Angled handpieces
Article No. 1960 for 70mm / 1961 for 95 mm
125/145 mm length and 1:1 trans­mission, with spray nozzle and Quick lock for
instruments with a length of 70 and 95 mm and a shank Ø of 2.35 mm
General surgery handpiece
Article No. 1710
90 mm length and 1:1 trans­mission, with spray nozzle and Quick lock for instruments with a length from 44 mm and a shaft diameter of 2.35 mm
Handpieces
Article No. 1950 for 105 mm / 1951 for 125 mm
105/125 mm length and 1:1 trans­mission, with spray nozzle and Quick lock for
instruments with a length of 70 /95 mm and a shank Ø of 2.35 mm
MSS 5000 micro jigsaw Article No. 5040
With INTRA EN3964 coupling, removable irrigation tube, recommended speed
15,000 rpm
OMS 5000 Oszillating micro saw Article No. 5090
With INTRA EN3964 coupling, removable irrigation tube, recommended speed
15,000 rpm.
MOS 5000 Sagittal micro saw Article No. 5110
With INTRA EN3964 coupling, removable irrigation tube, recommended speed
15,000 rpm.
Mucotome Article No. 1970
The mucotome for treating oral mucosa with INTRA EN3964 coupling, works with
a cutting thickness of 0.5 mm and a width of 5 mm at speeds between 500 and
8,000 rpm.
1:1 Contra angle for drilling
Article No. 5050/1059 with push button
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a
max. Torque of 10 Ncm.
16:1 Contra angle for drilling
Article No. 5060
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a
max. Torque of 30 Ncm.
32:1 Contra angle for drilling Article No. 5054
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a
max. Torque of 55 Ncm.
20:1 Contra angle for drilling Article No. 5053 with push button
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a
max. Torque of 80 Ncm.
20:1 LED Contra angle for drilling Article No. 5052 with push button
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a
max. Torque of 80 Ncm with Hexagon chuck.
Nouvag AG · St.Gallerstr. 23–25 · CH-9403 Goldach Phone +41 (0)71 846 66 00 · Fax +41 (0)71 846 66 70
info@nouvag.com · www.nouvag.com
Nouvag GmbH · Schulthaißstr. 15 · D-78462 Konstanz Phone +49 (0)7531 1290-0 · Fax +49 (0)7531 1290-12
info-de@nouvag.com · www.nouvag.com