Linear actuator Palon S - elero GmbH

Palon S
Electromechanical spindle drive
for automatic bollards
Rising
just 2.5
time
seconds *
The areas of application for the Palon S are automatic bollard lowering devices for securing and blocking paths,
parking spaces and work areas. Thanks to the integrated limit switches, the Palon S can be incorporated quickly
without additional controls. Compared with hydraulic drive systems, it is especially environment-friendly as it does
not require any oil.
Features
· Low energy consumption
· Maintenance-free throughout
service life
· Water-tight aluminium housing
· Integrated end position limit switch
· Direct parallel connection for several
drives
Options
· Integrated heating
· Operation possible via
uninterrupted supply voltage (USV)
for safety-relevant applications
· End position feedback
(non-isolated)
· Radio remote control
Types of fastening
·
·
·
·
Articulated lug
Threaded pin (piston end)
Joint rod head (DIN 648)
Flange attachment
* Depending on travel range
Palon S
Technical specifications
Variants
Housing diameter (mm)
Rated voltage
Rated current (A)
Power consumption (VA)
Adjusting force (N)
Stroke length (mm)
Stroke speed (mm/s)
Rising time (s)
Limit switch
Capacitor
Piston rod
Ingress protection (IP)
Temperature range (°C)
Mounting position
Brake
80
230 V 1AC, 50 Hz
approx. 2.3
530
400
400, 500, 600
approx. 200
approx. 2.5 *
internal, adjustable
external
secured against rotation
67
-10 to +60
Piston rod upwards
Integrated retaining brake
Articulated lug, flange,
threaded pin (piston end),
joint rod head (DIN 648)
Aluminium, anodised
Fastening
Housing material
Variant
Feedback
Heater 230 V
1
x
–
2
x
x
3
4
–
–
–
x
Circuit diagram
WS9303
WS9403
Dimensions table
Nominal size
Stroke length (mm)
Body dimension (mm)
1
2
3
400
500
600
882
982
1,082
Accessories
• Radio remote control
• Hand-held transmitter
• Heater
* Depending on travel range
Fastening options
Plan of dimensions for 600 mm stroke length
View A
piston end
-0.1
-0.2
Ø 95
A
min. 35
18
Threaded pin
21
min. 85
15
SW4
M 16
Limit switch adjustment
16
°
Ø 16
Body dimension
Joint rod head
DIN 648
housing end
min. 35
-0.1
-0.2
18
Ø 28
16
21
Ø 16 H8
min. 85
42
15
15
°
Joint rod head
DIN 648
Ø 16
Please find further technical
information on our website
www.elero-linear.com in the
category Service/Instructions.
elero GmbH
Linear Drive Technology
Technical/Sales
Nassaeckerstrasse 11
07381 Poessneck/Germany
T +49 3647 4607-0
F +49 3647 4607-42
Order processing
Linsenhofer Strasse 65
72660 Beuren/Germany
T +49 7025 13-02
F +49 7025 13-290
Flange with Ø 6.5 hole (4x)
Articulated lug
fixed
Length = Body dimension+ min. setting
15
min. setting
42
Ø 80
Ø 110
info@elero-linear.de
www.elero-linear.com
Subject to change! EN-2011565/0813
Ø 28
45°
Stroke
min. 37
max. setting = min. setting + stroke
Ø 28
Ø 16 H8
Articulated lug
fixed
45°
Ø 28
16