threadlockers • thread sealants • retaining

Transcription

• THREADLOCKERS • THREAD SEALANTS
• RETAINING COMPOUNDS • LIQUID GASKETING
• CYANOACRYLATES • ANTI-SEIZE COMPOUNDS
• UV CURABLES • EPOXIES • AND MORE!
A Company You Can Rely On
Since 1955, ND Industries has been providing top quality fastening and assembly related products
and services to a wide variety of industries including automotive, electronics, aerospace,
appliance, and many more. ND’s commitment to improvement has led to a continuous investment
in the best equipment, facilities, and people to serve you.
A Registered Trademark of ND Industries
Vibra-TITE is one of the world’s market leaders in anaerobics, cyanoacrylates, epoxies and
ultraviolet technologies. Vibra-TITE is quickly becoming one of the most highly respected
names in the adhesive industry. And, as a result of ND’s low overhead expenses and in-house
capabilities, Vibra-TITE products offer the same
high quality and superior performance of other
name brand products at a cost saving of
up to 40%.
A Single-Source Supplier
ND is a vertically integrated company and has
achieved a unique position in today’s market
place with a wide range of products designed
to seal, cushion, insulate, temporarily retain,
and control noise and vibration. ND’s high
quality line of products, customer driven
solutions and on-time-delivery is the reason
why more companies are turning to ND as
their single-source supplier.
2
A Global Presence
ND owns and operates numerous facilities
in North America. ND’s latest state of the art
expansion includes facilities in Taiwan and
China with licensees located throughout the
world. No matter where they are located, each
ND facility is a fully supported member of the
ND family dedicated to providing innovative,
affordable fastening and assembly related
products and services.
Table of Contents
Anaerobic Threadlockers.................................................................................................................. 4-6
Vibra-TITE® VC-3TM Threadmate............................................................................................................. 7
Thread Sealing.....................................................................................................................................8-9
Retaining .........................................................................................................................................10-11
Liquid Gasketing.................................................................................................................................. 12
Anti-Seize Lubricants.......................................................................................................................... 13
Cyanoacrylates................................................................................................................................14-15
Light Cure Adhesives.......................................................................................................................... 16
Structural Adhesives........................................................................................................................... 17
Primers, Accelerators & Activators.................................................................................................... 17
Epoxies .............................................................................................................................................. 18
Hot-melts / Urethane............................................................................................................................ 18
MMA’s
.............................................................................................................................................. 18
Vibra-Tite Specialty Products.............................................................................................................. 19
ND R & D, Chemical Blending, and Private Label Services........................................................20-21
ND Pre-Applied Products and Services........................................................................................22-23
www.vibra-tite.com
®ND, ND logo and ND Industries are registered trademarks and Vibra-TITE is a trademark of ND Industries, Inc.
3
Anaerobic
THREADLOCKERS
• Locks and seals threaded fasteners
• Stops fasteners from loosening from shock and vibration
• Performs better than lock washers, bevel washers, and other forms of mechanical locking devices
• Alleviates rust-lock
• Prevents leakage
Vibra-TITE
Part #
111
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1L Jug
12102
12110
12150
12125
12100
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1L Jug
12508
8 mL Tube
12535
35 mL Pump
125
122
242®
MEDIUM STRENGTH
24221
24231
24241
24243
243TM
13102
13110
13150
13125
13100
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1L Jug
26221
26231
26241
26243
13508
8 mL Tube
13535
35 mL Pump
262TM
272TM
13750
13725
13700
50 mL Bottle
250 mL Bottle
1L Jug
27240
27270
27285
14002
14010
14050
14025
14000
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1L Jug
27121
27131
27141
27143
14602
14610
14650
14625
14600
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1L Jug
21434
27731
27741
27743
15002
15010
15050
15025
15000
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1L Jug
29021
29031
29041
29043
140
146
150
LOW STRENGTH
Easy to remove - for
fasteners smaller than
1/4’’ in diameter.
24077
24078
24079
21433
135
Product Description
21463
21464
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1L Jug
137
4
222
12202
12210
12250
12225
12200
131
NEW!
Loctite®
Part#
TM
11102
11110
11150
11125
11100
121
NEW!
Available
Sizes
271TM
277TM
290TM
Removable Grade for
fasteners 1/4’’ to 3/4’’ in
diameter.
Color
Approx.
Max Gap
Viscosity (cP) (Fill, in)
Torque Strength,
Break/Prevail
(in LB)
Temp
Fixture Specific Suggested
Specs Met
Range Time (min) Gravity
Primer
Purple
1200 - 5000
Thixotropic
0.007
75 / 25
-65°F to
300°F
10 - 30
1.05
N or T
MIL-S-46163A
ASTM D-5363
NSF Non-Food
Blue
1200 - 5000
Thixotropic
0.007
120 / 45
-65°F to
300°F
10 - 30
1.07
N or T
MIL-S-46163A
ASTM D-5363
NSF Non-Food
MEDIUM STRENGTH GEL
Removable Grade for
fasteners 1/4’’ to 3/4’’ in
diameter.
Blue
Gel
0.015
120 / 45
-65°F to
300°F
10 - 30
1.1
N or T
Used on fasteners from
1/4’’ to 3/4’’ in diameter.
Blue
2250 - 12000
Thixotropic
0.015
195 / 70
-65°F to
300°F
5 - 10
1.08
N or T
1800 - 5000
Thixotropic
0.007
200 / 100
-65°F to
300°F
5 - 20
1.05
N or T
Gel
0.015
200 / 100
-65°F to
300°F
5 - 20
1.1
N or T
OIL TOLERANT
PERMANENT STRENGTH
Permanently locks nuts
and bolts up to 1” in
diameter.
Red
PERMANENT STRENGTH GEL
MIL-S-46163A
ASTM D-5363
NSF Non-Food
and bolts up to 3/4” in
diameter.
Red
and bolts up to 1 1/2” in
diameter.
Red
9500
0.007
300 / 250
-65°F to
450°F
5 - 60
1.11
N or T
Red
500
0.007
250 / 275
-65°F to
300°F
10 - 30
1.10
N or T
MIL-S-46163A
ASTM D-5363
HIGH TEMP / HIGH STRENGTH
HIGH STRENGTH
and bolts up to 1” in
diameter.
LARGE DIAMETER / HIGH STRENGTH
and bolts up to 1 1/2” in
diameter.
HIGH STRENGTH
Used on pre-assembled
fasteners up to 1/2” in
diameter and porous die
castings.
Red
7000
0.010
300 / 250
-65°F to
300°F
10 - 20
1.12
N or T
MIL-S-46163A
ASTM D-5363
Green
12
0.004
85 / 250
-65°F to
300°F
5 - 20
1.08
N or T
MIL-S-46163A
ASTM D-5363
NSF Non-Food
Loctite and 242 are registered trademarks and 222, 243, 262, 272, 271, 277 and 290 are trademarks of Henkel Corp. USA.
Vibra-Tite Anaerobic
Threadlockers lock and
seal threaded fasteners. Liquid
threadlockers are considered to
be the most effective method
of locking threaded fasteners
because they utilize the entire
assembly. They perform better
than traditional mechanical
devices such as lock washers
preventing any loosening from
shock and vibration.
Anaerobic Threadlockers
NEW
Low Strength
Introduction!
2 ml Resealable
Bullet Tubes
15-25 Applications
in each Tube!
Medium Strength
Vibra-TITE 111 Low Strength Threadlocker that eliminates vibrational loosening and
seals against leakage and corrosion. Ideal for use on assemblies requiring periodic
adjustment. Typical uses include soft metal fasteners, precision screws, and locking
fasteners smaller than 1/4” in (6mm) diameter. COMPETES WITH LOCTITE 222™
Locks nuts and bolts larger
than ¼” in diameter.
®
Vibra-TITE 121 Medium, Removable Strength Threadlocker that seals nuts and bolts
allowing disassembly using standard tools. Typical uses include locking nuts or bolts
from 1/4” to 3/4” (6-20mm) in diameter. COMPETES WITH LOCTITE® 242
®
Vibra-TITE 122 Medium Strength Threadlocker with greater oil tolerance. Typical
uses include locking nuts or bolts ranging from 1/4” to 3/4” (6-20mm) in diameter.
COMPETES WITH LOCTITE® 243™
Vibra-TITE 131 High Strength Permanent Threadlocker for maximum security suitable for most applications where disassembly is not required. Designed to withstand
extreme environmental conditions and chemical exposure. Ideal for the prevention of
rust and corrosion. Typical uses include permanently locking nuts or bolts up to 1” in
diameter. Heat and hand tools are needed for disassembly. COMPETES WITH LOCTITE® 262™
High Strength
and bolts larger than ¼” in
diameter.
THREADLOCKERS
For soft metal fasteners.
Locks fasteners smaller
than ¼” in diameter.
Vibra-TITE 137 High Strength Threadlocker for maximum security that withstands
temperatures to 4500 F. Typical uses include bolts up to 1 1/2” in diameter. Heat and
hand tools are needed for disassembly.
Vibra-TITE 140 High Strength Threadlocker for maximum security. Suitable for most
applications where disassembly is not required. Typical uses include permanently
locking nuts or bolts up to 1” (25mm) in diameter. Heat and hand tools are needed for
disassembly. COMPETES WITH LOCTITE® 271™
Vibra-TITE 146 High Strength Threadlocker for permanently locking nuts or bolts up
to 1 1/2” in diameter. Heat and hand tools are needed for disassembly. COMPETES WITH
Wicking Grade
Pre-assembled fasteners
and porous die castings.
LOCTITE® 277™
Vibra-TITE 150 Wicking Grade, Medium Strength Threadlocker designed specifically
for use on pre-assembled connections. Seals small gaps through capillary action. Typical
uses include pre-assembled fasteners up to 1/2” in diameter and porous die castings.
Protects welds from rust and corrosion. Hand tools are needed for disassembly. COMPETES
WITH LOCTITE™
www.vibra-tite.com
Loctite and 242 are registered trademarks and 222, 243, 262, 272, 271, 277 and 290 are trademarks of Henkel Corp. USA.
5
Anaerobic
Threadlockers
NEW
Introduction!
100 ct. 2ml Bullet Tubes
in handy counter-top
fishbowl display.
Available with 121 and 131 threadlockers.
Part #12199
Vibra-TITE 121* Fishbowl
with 100 ct. 2ml Bullet Tubes
Medium Strength Threadlocker
Part #13199
Vibra-TITE 131* Fishbowl
with 100 ct. 2ml Bullet Tubes
Permanent Strength Threadlocker
*COMPETES WITH LOCTITE 262™
*COMPETES WITH LOCTITE® 242®
#
535 High S
th T hread
e
lo c
ker G
NEW
l
13
ng
tre
®
Introduction!
#12535 Mediu
Part #13535
High Strength
Threadlocker in 35ml
pump dispenser.
No Mess!
No Waste!
No-drip!
Provides complete coverage
every time!
6
Loctite and 242 are registered trademarks and
262 is a trademark of Henkel Corp. USA.
tre
mS
ngth Thre
ad
loc
l
ker Ge
Part #12535
Medium Strength
Threadlocker in 35ml
pump dispenser.
Not an Adhesive!
Not an Anaerobic!
Reusable 5 or more times!
#21302
#21305
#21330
#21325
|
|
|
|
2 mL Pillow Pack
5 mL Tube
30cc Bottle w/Brush
250cc Can
One Tough Application!
•
•
•
•
•
Stops fasteners from loosening from extreme shock and vibration
Works with metal, wood, plastic and more
Fasteners are easily adjusted, removed and reused Works on fasteners of any shape or size, from tiny eyeglass screws to large construction bolts
Works with internal or external threads
This product is approved by TACOM*
for use on the US Army’s main battle tank!
*US Army Tank-automotive and Armaments Command Part# 11663357
Vibra-TITE® VC-3® Threadmate Specifications
Container size (manual application)
Color
Solvent
Cured form
Shelf life
Chemical resistance
1oz. (30 cc), 8 oz. (250 cc), or larger containers
Red (custom colors are also available)
Methyl ethyl ketone
Resilient plastic
Indefinite (under ideal storage conditions)
Offers resistance to most solvents (acts as a partial corrosion
barrier)
Total resistance
Fresh and salt water
Dries to touch
In seconds
Dries for use
In minutes
Drying method for bulk production
Best achieved using considerable airflow in addition to temperature not exceeding 130˚F
Operational temperature range
-65˚F to +165˚F (-54˚C to +74˚C) For other temperature applications, please consult factory
Reusable
5 or more times
Engagement torque
Moderate
Breakaway
No distinct break; slow, fluid release as material cold flows
Standard coating length
1 to 1 1/2 times diameter
Lead thread requirement
None
Thread fill requirement
30 – 50% of the thread root area
Note: See MSDS for Safety & Material Handling Instructions
THREADLOCKERS
Vibra-TITE® VC-3® Threadmate is a
powerful locking and sealing coating for threaded
fasteners that works on the principle of “friction
through viscosity”. Vibra-TITE VC-3 Original
utilizes a special blend of acrylic resins to prevent
fasteners from loosening even under the stress
of prolonged and extreme shock
and vibration. Vibra-TITE VC-3
also works to resist leakage at
fastening points by acting as a
dam between mated threads.
Vibra-Tite VC-3 Threadmate meets or
exceeds the performance requirements
of the following specifications and/or
standards:
MILITARY
•
Mis-28867 U.S. Air Force Part # 19207
•
U.S. Army Tank Automotive Command (General
Dynamics) Part #11663357
•
National Stock Number NSN-8030-00-163-5792
OEM
•
•
•
•
www.vibra-tite.com
Detroit Diesel 9S244 & 9S256
Grumman Aerospace Standard GF105VP1, CA1
Allied Signal EMS73314, PCS5618
Delphi 00047127
7
Anaerobic
THREAD SEALANTS
• Seals and secures metal pipes and fittings
• Fills the space between threaded metal parts
• Prevents leakage caused by tape shredding, vibration
loosening, solvent evaporation, or damaged threads
• Prevents corrosion and galling of threads
• Low and high pressure applications
• Seals to burst strength of most piping systems
• Facilitates assembly
• Service removable
Vibra-TITE
Part #
Available
Sizes
420
56541/59241
250 mL Tube
16oz Jar w/brush
42000
1L Jug
42750
50 mL Tube
42725
250 mL Tube
440
54541
44000
1L Jug
50 mL Bottle
56931
250 mL Bottle
56941
44400
1L Jug
56943
460
90
N or T
Purple
16,000
0.007
10,000
-65°F to 300°F
30
N or T
0.007
10,000
-65°F to 300°F
10
T
10,000
-65°F to 300°F
10
N or T
-65°F to 400°F
60
N or T
Hydraulic sealant, non shrink,
high vibration and shock
resistant.
44425
1L Jug
-65°F to 300°F
HYDRAULIC SEALANT - HIGH PRESSURE
44450
250 mL Bottle
10,000
Yellow
569™
10 mL Bottle
44600
0.012
Pneumatic and hydraulic
sealant for fluid, power and
gas system connections.
250 mL Bottle
44625
420,000
PNEUMATIC / HYDRAULIC SEALANT
44025
50 mL Bottle
N or T
545™
54531
44650
60
High Performance Sealant.
32429
10 mL Bottle
-65°F to 300°F
21456
50 mL Bottle
44610
10,000
HIGH STRENGTH - YELLOW
10 mL Bottle
446
0.012
577™
44050
44410
150,000 550,000 Paste
56543/59243
44410
444
Approx.
Max Gap
Sealing
Cure Speed Suggested
Temp Range
Specs Met
Viscosity (cP) (Fill, in) Pressure (PSI)
(min)
Primer
Industrial grade, controlled
White
locking strength, metal fittings.
High temp & high performance.
Gasoline resistant.
56531 /59231
42025
Color
CONTROLLED STRENGTH - SLOW CURE
50 mL Tube
42016
Product Description
592™/565™
42050
427
8
Loctite®
Part#
Brown
300 - 500
554™
REFRIGERANT SEALANT - HIGH PRESSURE
25882
Refrigerant sealant. Maximum
solvent resistance.
Red
6000 - 8000
55441
567™
GENERAL PURPOSE - HIGH TEMP / STAINLESS STEEL PIPE SEALANT
46006
6 mL Tube
56707
46050
50 mL Tube
56747
46025
250 mL Tube
56765
General purpose. For stainless
steel and other inert metal
threaded pipes and fittings.
Gasoline resistant.
46016
16oz Jar w/brush
33241
46000
1L Jug
56790
White
350,000
0.012
10,000
Loctite is a registered trademark and 592, 565, 567, 545, 569, 554 and 577 are trademarks of Henkel Corp. USA.
GM 1182607
Thread Sealants seal and
Anaerobic Thread Sealants
Vibra-TITE 420 PTFE Instant Pipe Sealant - Industrial Grade cures rapidly with
controlled lubricity preventing galling while protecting from corrosion and rust. Parts
may be repositioned up to 24 hours after assembly. Typical uses include stainless steel
and all other metal fittings. COMPETES WITH LOCTITE 565™/592™
®
Vibra-TITE 440 Hydraulic & Pneumatic High Pressure Sealant with excellent solvent
resistance. It locks hydraulic and pneumatic connections producing a high strength,
high pressure seal, while allowing easy disassembly with standard tools. Typical
uses include pneumatic fittings, small pipe threads, and hydraulic fittings up to 2” in
diameter. COMPETES WITH LOCTITE® 545™
Vibra-TITE 446 High Pressure Sealant - Refrigerant Sealant provides excellent
resistance to solvents on threaded pipes and fittings up to 3” in diameter. Typical
uses include refrigeration systems and service with volatile chemicals. COMPETES WITH
LOCTITE® 554™
Vibra-TITE 460 PTFE Instant Pipe Sealant - General Purpose prevents galling
and provides an instant low pressure seal on coarse fitting threads which is further
strengthened as the product cures. Assembled parts can withstand temperatures up to
400°F (204°C) and may be repositioned up to 24 hours after assembly. Typical uses
include stainless steel, aluminum, galvanized metal and other inert metal threaded pipe
fittings. COMPETES WITH LOCTITE® 567™
Vibra-TITE 427 High Strength Instant Pipe Sealant High Viscosity locks and seals
threaded fittings with high performance withstanding temperatures up to 300°F
(149°C). COMPETES WITH LOCTITE® 577™
Benefits:
Typical Applications:
• Lubricates during assembly
• Seals regardless of assembly
torque
• Seals to the burst rating of the pipe
• Provides controlled disassembly
torque
• Easy dispensing
• Good chemical and temperature
resistance, 300°F (150°C)
• Instant seal
• Seals and secures metal fittings
•
•
•
•
•
•
•
Fire protection industry
Chemical processing industry
Petroleum refining industry
Waste treatment facilities
Utilities and power generation
Gas compression and distribution
Automotive and industrial
equipment
www.vibra-tite.com
®ND, ND logo, ND Industries and Vibra-TITE are registered trademarks of ND Industries, Inc.
Loctite is a registered trademark and 592, 565, 545, 569, 554, 567 and 577 are trademarks of Henkel Corp. USA.
THREAD SEALANTS
Vibra-TITE 444 Hydraulic High Pressure Sealant is a general purpose pipe sealant
that creates an instant seal on threaded joints with a high resistance to solvents and
withstands temperatures to 300°F (149°C). Typical uses: Small pipe threads and
hydraulic fittings. COMPETES WITH LOCTITE® 569™
secure metal pipes and fittings, by
filling the space between threaded
metal parts. Thread sealants
prevent leakage caused by tape
shredding, vibration loosening,
solvent evaporation, and damaged
threads. Vibra-TITE products are
designed for both low and high
pressure applications. Thread
sealants seal to the burst strength
of most piping systems. Because
of the lubricating properties,
Vibra-TITE thread sealants make
it easy to assemble fittings as
well as prevent galling of the
threads. For repairs, parts may
be disassembled with basic hand
tools.
9
Anaerobic
RETAINING COMPOUNDS
• Increases the shear strength on non-threaded
cylindrical metal assemblies
• Fills voids between close-fitting metal assemblies
• Creates a solid one-piece assembly
• Seals joints against leakage
• Prevents corrosion
Vibra-TITE
Part #
530
Available
Sizes
53002
53010
53050
53025
53000
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1 L Jug
53850
53825
53800
50 mL Bottle
250 mL Bottle
1 L Jug
54102
54110
54150
54125
54100
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1 L Jug
54202
54210
54250
54225
54200
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1 L Jug
54650
54625
54600
50 mL Bottle
250 mL Bottle
1 L Jug
54850
54825
54800
50 mL Bottle
250 mL Bottle
1 L Jug
55050
55000
50 mL Bottle
1 L Jug
56002
56010
56050
56025
56000
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1 L Jug
56702
56710
56750
56725
56700
2 mL Bullet
10 mL Bottle
50 mL Bottle
250 mL Bottle
1 L Jug
538
541
542
546
548
550
560
567
Loctite®
Part#
675TM/609TM
60921
60931
60941/67541
60943
Product Description
Color
General purpose for:
Green
rotors, augment press fits,
shafts, bushings, bearings
and pulleys.
125
0.005
2000+
-65°F to
300°F
10 - 20
1.10
N or T
2500
0.015
4000+
-65°F to
300°F
5
1.09
N or T
1200
0.015
3000+
-65°F to
300°F
20-40
1.11
T
NSF Non-Food
2000
0.015
4000+
-65°F to
300°F
20-40
1.05
T
MIL-R-46082
ASTM D-5363
Green
600
0.015
2000+
-65°F to
300°F
20-40
1.09
N
Green
500
0.007
3500+
-65°F to
350°F
5
1.09
N or T
Blue
8500
0.02
2300+
-65°F to
300°F
10 - 20
1.09
N
600
0.007
3000+
-65°F to
400°F
5 - 60
1.12
N or T
MIL-R-46082
ASTM D-5363
7000
0.015
3500+
-65°F to
450°F
20 - 30
1.16
N or T
GM-1183024
638TM
HIGH STRENGTH
High strength for loose
fitting parts.
680TM
HIGH STRENGTH - SLIP FIT
Green
High strength gap filling.
Green
Permanently retains
slip-fit. For: rotors, shafts,
impellers, and splines.
635TM
HIGH STRENGTH - LARGE GAP
63531
63541
High viscosity permits
Green
larger machine tolerances.
For: rotors, shafts,
impellers and splines.
N/A
Temp
Fixture Specific Suggested
Specs Met
Range Time (min) Gravity
Primer
GENERAL PURPOSE
21448
21449
68015
68035
68060
68090
Approx.
Max Gap Shear Strength
(PSI)
IMPACT RESISTANT
Flexible for impact
resistance.
648TM
RAPID CURING
21444
21445
Fast fixturing for close
fitting parts, high strength
for stainless steel.
11358TM CORE PLUG SEALANT
11358
640TM
HIGH TEMPERATURE - FAST SET
64031
64041
High temperature fast
setting for: rotors, shafts,
bushings, bearings and
pulleys.
620TM
HIGH TEMPERATURE - LARGE GAP
62015
62040
62070
62085
High temperature gap
filling for: rotors, shafts,
bushings, bearings and
pulleys.
Green
Green
Loctite is a registered trademark and 675, 609, 638, 680, 635, 648, 11358, 640 and 620 are trademarks of Henkel Corp. USA.
10
MIL-R-46082
ASTM D-5363
GM-1183024
Retaining Compounds
Anaerobic Retaining Compounds
Vibra-TITE 530 General Purpose Retaining Compound bonds metal assemblies. A
low viscosity retaining compound recommended for diametral gap distances up to
0.005” to augment press fits. Withstands temperatures of up to 300° F providing a
shear strength of 3,000psi after 24 hours with a fixture time of 10 minutes. Typical
uses: Rotors, shafts, bushings, bearings, and pulleys. COMPETES WITH LOCTITE 609™/675™
®
Vibra-TITE 538 High Strength Retaining Compound provides maximum strength for
use where high dynamic force or cyclic loading is anticipated. COMPETES WITH LOCTITE®
638™
Vibra-TITE 542 High Strength Retaining Compound is a high viscosity retaining
compound that allows parts to be adjusted during assembly. It provides a shear
strength greater than 4,000psi. Typical uses include slip fit components, rotors, shafts,
impellers, and splines. COMPETES WITH LOCTITE® 635™
Vibra-TITE 546 Substantial Impact Resistance flexible for high shock/impact
performance from hub to rotor.
Vibra-TITE 548 Press Fit / Rapid Cure works with continuous operating temperatures
up to 350°F. Provides a shear strength greater than 3,500psi. COMPETES WITH LOCTITE®
648™
Vibra-TITE 550 Core Plug Sealant COMPETES WITH LOCTITE® 11358™
Vibra-TITE 560 High Temperature Retaining Compound is a high temperature (400°F
/ 204°C), high strength adhesive for retention of cylindrical components, where
disassembly is not required on press-fit assemblies. It provides a shear strength
greater than 3,000psi. Typical uses: Rotors, shafts, bushings, bearings, and pulleys
with temperatures up to 400°F. COMPETES WITH LOCTITE® 640™
Vibra-TITE 567 High Temperature Retaining Compound locks metal cylindrical
assemblies with diametral clearances up to 0.015”. Provides a shear strength greater
than 3,500 psi on steel sealing against leakage while preventing corrosion. Typical
uses: Rotors, shafts, bushings, bearings, and pulleys. COMPETES WITH LOCTITE® 620™
Benefits:
• Reduce machining costs
• Press/Shrink fits can be replaced
with slip fits
• No expensive finishes required
• Increase mechanical strength of
the assembly
• 100% surface contact
• Retains and seals, eliminates
corrosion and seizure
• Restore fit to worn or out-oftolerance assemblies
• Eliminate part replacement
• Part distortion is eliminated
• Mount bearings in housings or
shafts
• Mount motors, gears, sprockets
and pulleys on shafts
• Retain cylindrical linings
• Replace keys and set screws
• Augment slip fits
• Lock keyways
• Secure splines, bushings, bearings,
oil seals, water pumps core plugs
and more
www.vibra-tite.com
Loctite is a registered trademark and 675, 609, 638, 680, 635, 648, 11358, 640 and 620 are trademarks of Henkel Corp. USA.
RETAINING COMPOUNDS
Vibra-TITE 541 High Strength Retaining Compound cures in room temperatures filling
diametral gaps up to 0.015”. Typical uses include fitted cylindrical parts replacing set
screws, clamp rings, and snap rings. It provides a shear strength greater than 3,000psi
after 24 hours with a fixture time of 10 minutes. COMPETES WITH LOCTITE® 680™
are designed to increase shear
strength
on
non-threaded,
cylindrical metal assemblies.
The liquid anaerobic material
fills voids between close-fitting
metal assemblies. It cures to a
toughened
thermoset-plastic
which creates a solid one piece
assembly. Retaining compounds
seal joints against leakage and
prevent corrosion. These materials
have gained wide acceptance as a
standard method for assembling
press-fit and slip-fitted parts.
11
Anaerobic
LIQUID GASKETING
Form-in-place gasket for close fitting rigid metal flanges.
Ideal for flanges that move in service.
Vibra-TITE Anaerobic Liquid Gasketing is designed
primarily for close fitting (small gap) rigid metal flanges.
The Anaerobic material remains liquid when exposed to
air, but cures when confined between mating flanges.
Anaerobic liquid gasketing can fill gaps of 0.050 (primed)
and alleviates the need for preformed gaskets. It is ideal
for flanges that move in service and can be used as formin-place gaskets.
Benefits:
•
•
•
•
Can be used as a form-in-place gasket:
Remains liquid when exposed to air
Cures when confined between mating flanges
Can fill gaps as large as 0.050
Alleviates the need for preformed gaskets
Vibra-TITE
Part #
Available
Sizes
709
Loctite®
Part#
509TM
70950
50 mL Tube
70930
300 mL Cart
710
21525
51031
51041
71030
300 mL Cart
51074
73025
250 mL Tube
73030
300 mL Cart
732
73250
50 mL Tube
73225
250 mL Tube
73230
300 mL Cart
Flexible flange sealant withstands
minor movements caused by
vibration. Fluorescent blue color
aids visual assembly inspections.
Blue
65,000 200,000
Thixotropic
Red
188,000
- 500,000
Thixotropic
518TM
FLEXIBLE GASKET MAKER - SOLVENT RESISTANT
51831
Suitable for aluminum and rigid
machined flanges. Eliminates preformed, pre-cut paper, rubber and
cork gaskets.
51845
515TM
FLEXIBLE GASKET MAKER
51531
General purpose gasket maker that
flexes with flanges. Eliminates preformed, pre-cut paper, rubber and
cork gaskets.
51580
• Compressors
• Transmission housings
• Axel covers
Temperature
Cure Speed
Range
Unprimed:
0.010
Primed:
0.020
-65°F to 300°F
Unprimed:
6-48hrs
Primed: 1-6hrs
N or T
Unprimed:
0.010
Primed:
0.020
-65°F to 400°F
Unprimed:
4-24hrs
Primed:
30min-4hrs
N or T
Red
800,000 3,750,000
Thixotropic
Unprimed:
0.010
Primed:
0.020
-65°F to 300°F
Unprimed:
1-12hrs
Primed:
15min-2hrs
N
Purple
275,000
- 950,000
Thixotropic
Unprimed:
0.010
Primed:
0.020
-65°F to 300°F
Unprimed:
4-24hrs
Primed:
30min-4hrs
N
Loctite is a registered trademark and 509, 510, 515 and 518 are trademarks of Henkel Corp. USA.
12
Suggested
Primer
Specs Met
FLEXIBLE GASKET MAKER
High temperature rigid flange
sealant withstands temperatures
up to 400˚F with excellent chemical
and solvent resistance.
50 mL Tube
250 mL Tube
50 mL Tube
Approx.
Max Gap
HIGH TEMPERATURE RIGID FLANGE SEALANT
71025
73050
Color
510TM
71050
730
Product Description
• Thermostats
• Pumps
• Gearboxes
GM-1182863
ANTI-SEIZE COMPOUNDS
Vibra-TITE
Part #
Available
Sizes
Loctite®
Approx.
Temperature
Product Description Color
Part#
Viscosity (cP) Resistance
907A
Silver
90702
2 mL Bullet
90704
4oz Jar w/Brush
80209
90708
8oz Jar w/Brush
76732
90706
16oz Jar w/Brush
76764
90705
5gal Plastic Pail
76775
907C
C5-A®
90712
2 mL Bullet
90713
3oz Tube
90714
4oz Jar w/Brush
51144
90718
8oz Jar w/Brush
51147
90716
16oz Jar w/Brush
51007
90715
5gal Plastic Pail
907N
K-Value
Specs Met
1600°F
0.18
MIL A-907E
GM-6108M
1800°F
0.16
ALUMINUM ANTI-SEIZE COMPOUND
Lubricant ideal for
all metals to prevent
seizing, galling
and excessive
wear. Resists
harsh chemical
environments.
Silver
120,000 175,000 Paste
COPPER ANTI-SEIZE COMPOUND
Lubricant ideal
for use on softer
metal parts such as
copper and brass.
Protects from rust
and corrosion as
well as prevents
seizing, galling and
excessive wear.
Excellent resistance
to harsh chemical
environments.
Copper
120,000 175,000 Paste
2 ml Bullet Tubes
Multiple applications in
each tube!
Nickel NICKEL ANTI-SEIZE COMPOUND
90722
2 mL Bullet
90724
4oz Jar w/Brush
90728
8oz Jar w/Brush
90726
16oz Jar w/Brush
90725
5gal Plastic Pail
Versatile: Vibra-Tite
Lubricant ideal
Nickel
350,000 for extreme
500,000 Paste
temperatures.
Copper free base.
77124 Resistant to
77164 harsh chemical
environments.
Excellent for
77175 stainless steel and
Anti-Seize
907fittings.
is available in three
other metal
1) 907A Aluminumgraphite is a general
purpose lubricant.
Resists seizing, galling,
galvanic attack, and
excessive wear.
2) 907C Copper-graphite
is a general purpose
lubricant. Ideal for soft
metal parts, plastics and
nonmetallic gasketing.
2400°F
0.13
different formulas:
3) 907N Nickel-graphite
is a high temperature
lubricant suitable where
different metals (such as
brass and steel) come
in contact. This product
is also available PreApplied.
www.vibra-tite.com
Loctite and C5-A are registered trademarks of Henkel Corp. USA.
GASKETING & LUBRICATING
The Anti-Seize 907 family of lubricants is
specially formulated to prevent seizing,
galling, pitting, excessive wear, and
corrosion. The lubricating formulation is a
protective paste consisting of fine flakes of
graphite suspended in a blend of lubricants
and oils. It will not wash, squeeze or burn
out, even at elevated temperatures and high
pressures.
13
®
CYANOACRYLATES
are single-part clear adhesives that rapidly
polymerize at room temperature and develop
strength extremely fast (fixture 0 to 60 seconds).
They are initiated by moisture on the parts
surface or by accelerators.
Cyanoacrylates, commonly known as
Super Glues, are highly useful in virtually
every industry. Some of the higher volume
applications include printed circuit board
wires and a broad range of medical
devices.
OEM applications include small and large
appliances, automotive applications, toys,
and cosmetic packaging.
MRO applications include repair of plastic,
rubber and metal parts.
Everyday consumers are a large volume
user of Super Glues for use and repair on
everything from crafts to broken toys and
household gadgets.
NEW
Introduction!
2ml Resealable Bullet Tubes
15-20 Applications in Each Tube
Typical Applications
• Wire tacking on PC boards
• Ceramic, fabric, metal and leather bonding
• Bonding molded parts such as automotive weather
striping, wiper blades
• Speaker cones
• Identification tags to equipment
• Bonding control panel switches
• Bond rubber pads to equipment base or legs
14
Factors that Effect CA Performance
•
Low humidity = slower cure speed
•
Low viscosity for small gaps
•
Difficult to bond surfaces: Teflon,
Silicone, Polyethylene, Polypropylene
•
Excess adhesive - Less is best
Vibra-TITE
Part #
30002
30028
30054
30903
30920
31102
31120
31154
31402
31428
31454
32202
32228
32254
34402
34428
34454
36202
36220
36254
39502
39528
39554
30102
30120
30154
30602
30620
30654
33120
33154
33302
33320
33354
35403
35420
36020
36054
31002
31020
31054
38802
38828
38854
301
2 mL Bullet
20gm Bottle
1lb Bottle
306
2 mL Bullet
20gm Bottle
1lb Bottle
331
20gm Bottle
1lb Bottle
333
2 mL Bullet
20gm Bottle
1lb Bottle
354
3gm Tube
20gm Tube
360
20gm Bottle
1lb Bottle
310
2 mL Bullet
20gm Bottle
1lb Bottle
388
2 mL Bullet
1oz Bottle
1lb Bottle
330
33028
33054
1oz Bottle
1lb Bottle
Approx.
Max Gap
Shear
Temp Fixture Specific
Product Description Category Color Viscosity
Specs Met
(Fill, in) Strength (PSI) Range Time
Gravity
(cP)
GENERAL PURPOSE INSTANT SUPERGLUE
General Purpose.
Ethyl
Clear
250-350
0.006
2500-3000
-65°F to
180°F
20 Sec
1.05
General Purpose Gel.
Ethyl
Clear
Thixo Gel
0.01
3200
-65°F to
180°F
75 Sec
1.10
Gap Filling / Wire
Tacking.
Ethyl
Clear
5000
0.008
3200
-65°F to
180°F
30 Sec
1.05
Plastic Bonder.
Ethyl
Clear
110
0.006
3200
-65°F to
180°F
20 Sec
1.05
GM-1183023
Gap Filling Plastic
Bonder.
Ethyl
Clear
1500
0.008
3200
-65°F to
180°F
30 Sec
1.05
A-A3097 Type
II CL3 Ethyl
Wicking Type Plastic
Bonder.
Ethyl
Clear
2
0.002
2900
-65°F to
180°F
20 Sec
1.05
A-A3097 Type
II CL1 Ethyl
CL2 Ethyl
Gap Filling Plastic
Bonder.
Ethyl
Clear
2500
0.008
3200
-65°F to
180°F
30 Sec
1.09
A-A3097 Type
II CL3 Ethyl
42250
42261
444™
Wire Tacking.
Ethyl
Clear
700
0.002
2900
-65°F to
180°F
30 Sec
1.05
12294
498™
Thermal Cycling.
Ethyl
Clear
2000
0.006
3600
-65°F to
180°F
30 Sec
1.09
49861
495™
General Purpose.
Ethyl
Clear
45
0.004
2750
-65°F to
180°F
20 Sec
1.05
409™
40945
382™
38240
38261
414™
41450
41461
416™
41650
41661
420™
42050
42061
422™
49550
49561
A-A3097 Type
II CL3 Ethyl
A-A3097 Type
II CL1 Ethyl
CL2 Ethyl
SURFACE INSENSITIVE SUPERGLUE
401™
General Purpose.
Ethyl
Clear
90-120
0.005
3200
-65°F to
180°F
15 Sec
1.05
40140
40161
406™
Wicking Grade.
Ethyl
Clear
20
0.004
3200
-65°F to
180°F
15 Sec
1.05
Surface Insensitive.
Ethyl
Clear
1000-1500
0.002
3000-3500
-65°F to
180°F
15 Sec
1.05
Ethyl
Clear
250-350
0.006
3000-3500
-65°F to
180°F
30 Sec
1.05
For Porous Surfaces.
Ethyl
Clear
Thixo Gel
0.01
3000-3500
-65°F to
180°F
30 Sec
1.10
Ethyl
Clear
500-600
0.007
3000-3500
-65°F to
180°F
15 Sec
1.05
Gap Filling. Flexible Peel
& Shock Resistance.
Ethyl
Black
3500
0.008
3200
-65°F to
180°F
90 Sec
1.07
Close Fitting Parts.
Flexible Peel & Shock
Resistance.
Ethyl
Black
300
0.006
3750
-65°F to
225°F
90 Sec
1.10
GM-1183025
Metal Bonder for Close
Fitting Parts.
Methyl
3600
-65°F to
180°F
30 Sec
1.09
A-A3097 Type
I CL2 Methyl
40640
40661
454™
45404
45440
4471
®
32002
32028
32054
300
2 mL Bullet
1oz Bottle
1lb Bottle
309
3gm Tube
20gm Tube
311
2 mL Bullet
20gm Bottle
1lb Bottle
314
2 mL Bullet
1oz Bottle
1lb Bottle
316
2 mL Bullet
1oz Bottle
1lb Bottle
320
2 mL Bullet
1oz Bottle
1lb Bottle
322
2 mL Bullet
1oz Bottle
1lb Bottle
344
2 mL Bullet
1oz Bottle
1lb Bottle
362
2 mL Bullet
20gm Bottle
1lb Bottle
395
2 mL Bullet
1oz Bottle
1lb Bottle
Loctite®
Part#
CYANOACRYLATES
31602
31628
31654
Available
Sizes
GM-1183021
TOUGHENED SUPERGLUE
410™
41045
41061
380™
38050
38061
430™
43050
43061
METAL AND RUBBER BONDER
Clear
80
0.005
www.vibra-tite.com
Loctite is a registered trademark and 409, 382, 414, 416, 420, 422, 444, 498, 495, 401, 406, 454, 410, 380 and 430 are trademarks of Henkel Corp. USA.
15
®
Benefits:
• Almost instant cure
• Some cure with very low intensity
• Flexible or rigid products available
• High optical clarity & non-yellowing
• Bonds a wide range of substrates
• Will not shadow cure
LIGHT CURE ADHESIVES
are single part photo-initiated acrylates that cure on
demand when exposed to UV-light.
• Jewelry-crystal and stone setting
• Glass ornaments, house-hold
objects and more
Special Notes:
• One of the substrates must be
clear and transmit UV light
• Vibra-TITE Light Cure Adhesives
are available in 10ml and 30ml
syringes if needed
Vibra-TITE
Part #
Available
Sizes
Loctite®
Product Description
Part#
208
Cure
Type
30 mL Syringe
1 L Bottle
Impact resistant gel.
21150
21100
50 mL Bottle
1 L Bottle
Low viscosity glass
bonder.
21550
21500
50 mL Bottle
1 L Bottle
21600
1 L Bottle
22050
22025
22000
50 mL Bottle
250 mL Bottle
1 L Bottle
349TM
LIGHT CURE ADHESIVE
22950
22900
50 mL Bottle
1 L Bottle
34931
34990
High viscosity glass
bonder.
352TM
UV STRUCTURAL ADHESIVE
23050
23000
50 mL Bottle
1 L Bottle
35241
35286
Impact resistant
adhesive.
25050
25000
50 mL Bottle
1 L Bottle
25550
25500
50 mL Bottle
1 L Bottle
26550
26500
50 mL Bottle
1 L Bottle
29150
50 mL Bottle
29100
1 L Bottle
215
216
220
229
230
250
255
265
291
Temp
Range
UV / Opaque
Primer
Glass,
Metal
Gel
300
D70
-65°F to
250°F
UV /
Visible
Clear
Glass
100
100
D80
-65°F to
250°F
2500
UV /
Visible
Clear
Glass,
Plastic
8000
200
UV
Clear
Glass, Metal
Gel
>20
UV /
Visible
Amber
Glass
1200
UV
Clear /
Straw
Glass,
Metal
9500
300
D70
-65°F to
266°F
1600
UV / Heat / Clear/
Activator Amber
Glass,
Metal
19500
290
D60
-65°F to
374°F
2400
10 Sec
2300
Potting material.
5 Sec
Impact resistant gel.
LIGHT CURE ADHESIVE
Medium viscosity glass
bonder.
D65
-45°F to 300°F
10 Sec
1600
-65°F to
250°F
3 Sec
2000
LIGHT CURE ADHESIVE
Doming product for
plastics.
UV /
Visible
Clear
Plastics
6000
UV /
Visible
Clear
Metals
6000
UV /
Visible
Clear
Glass,
Plastics
200
LIGHT CURE ADHESIVE
Doming product for
metals.
LIGHT CURE ADHESIVE
Light tacking adhesive.
10
-65°F to
188°F
3 Sec
2900
3 Sec
3000
3921TM ACRYLIC UV / VISIBLE W/ FLUORESCENCE
Medical device bonder.
36485
UV /
Visible
Clear / Glass, Metal,
Fluores- Thermoplastic,
Polycarbonate,
cent Polyvinylchloride
150
-65°F to
300°F
LIGHT CURE ADHESIVE
50 mL Bottle
1 L Bottle
29750
50 mL Bottle
29700
1 L Bottle
638
LIGHT CURE ADHESIVE
UV plastic bonder.
UV /
Visible
Clear
Plastics
7500
Metal, Thermoplastic, Polyvinylchloride,
Polyurethane
320
300
D60
-55°F to
188°F
3971TM ACRYLIC UV / VISIBLE W/ FLUORESCENCE
Needle bonder.
36805
UV /
Clear /
Visible Fluorescent
-65°F to
300°F
Loctite is a registered trademark and 349, 352, 3921 and 3971 are trademarks of Henkel Corp. USA.
16
Shear
Fixture
Strength Activator
Time
(PSI)
LIGHT CURE ADHESIVE
294
29450
29400
297
Key Sub- Viscosity Elongation At Shore
strates
(cP)
Break %
Hardness
20831
20800
211
Color
600 / 638
STRUCTURAL ADHESIVES
are a Methacrylate technology, room temperature curing, 2-part, no-mix
system comprised of resin and hardener that forms structural bonds on
metal, composite, plastic, wood, ceramic and many other substrates.
They are ideal for parts where extended open time is needed.
21250
21200
50 mL Bottle
1 L Bottle
31231
31243
Fast cure on close fitting
parts.
325TM
NO-MIX STRUCTURAL ACRYLIC
22550
22500
50 mL Bottle
1 L Bottle
32530
32586
Severe environment
applications. Solvent resistant.
326TM
22650
22600
50 mL Bottle
1 L Bottle
32629
32685
Fast fixturing
applications.
330TM
23325
23300
25 mL Cart.
1 L Bottle
33081
Rough or porous
surfaces.
392TM
24050
24000
50 mL Bottle
1 L Bottle
39250
39280
Fast fixturing magnet
bonder.
27450
27400
50 mL Bottle
1 L Bottle
Vibra-TITE
Part #
600
Available
Sizes
60028
60025
60000
1 oz Bottle
250 cc Bottle
1 L Bottle
61102
61108
61100
2 oz Bottle
8 oz Bottle
1 gal Can
61202
61208
61200
2 oz Bottle
8 oz Bottle
1 gal Can
62102
62104
62108
62100
2 oz Bottle
4 oz Bottle
8 oz Bottle
1 gal Can
62302
62304
62308
62300
2 oz Bottle
4 oz Bottle
8 oz Bottle
1 gal Can
62402
62404
62408
62400
2 oz Bottle
4 oz Bottle
8 oz Bottle
1 gal Can
62502
62504
62508
62500
2 oz Bottle
4 oz Bottle
8 oz Bottle
1 gal Can
63800
1 L Bottle
Available
Sizes
212
225
226
233
240
274
Loctite®
Product Description
Part#
Amber
Transparent /
Dark Brown
Transparent /
Dark Brown
Pale
Yellow
Max Gap
(Fill, in)
Shear
Strength (PSI)
Temp
Range
Fixture Specific
Activator
Time Gravity
1000
0.003
3000
-65°F to
300°F
30 Sec
1.08
638
20000
0.040
2200
-65°F to
300°F
5 Min
1.11
638
18000
0.0420
3500
-65°F to
250°F
1 Min
1.10
638
67500
0.005
3300
-65°F to
250°F
5 Min
1.05
638
0.025
2500
-65°F to
300°F
1 Min
1.16
600 / 638
0.01
2300
-65°F to
250°F
1 Min
1.1
611
Amber 6500 / 17500
Thixo
RVM Rear view mirror
bonder.
Amber
3200
PRIMERS, ACCELERATORS & ACTIVATORS
611
612
621
623
624
625
638
Loctite®
Viscosity
Product Description Color
Part#
(cP)
7380TM STRUCTURAL ACTIVATOR
Structural activator.
Base
On-Part
Dry Time Application
Life
Light
Brown
43
Monomer
8 Hrs
None
Structurals
Clear /
Green
2
Acetone
30 Days
30-70 Sec
Anaerobics
Amber
2
Acetone /
Isopropanol
7 Days
30-70 Sec
Anaerobics
Clear
0.4
Heptane
24 Hrs
1 Min
All cyanoacrylates
Clear /
Amber
1
Heptane
1 Min
1 Min
All cyanoacrylates
Clear /
Amber
1
Isopropanol
1 Min
<30 Sec All cyanoacrylates
1
Acetone
1 Min
<30 Sec All cyanoacrylates
1.5
Heptane/Isopropanol
1 Hr
7649TM EXCEL PRIMER N
General purpose primer.
19266
7471TM EXCEL PRIMER T
Fast acting primer.
19268
Vibra-TITE surface
preparation products
promote maximum
performance of
adhesives and sealants.
7113TM EXCEL ACCELERATOR
19606
EXCEL ACCELERATOR
General purpose
accelerator.
712TM
BONDING PRODUCTS
312TM
Viscosity
Color (cP) at 20
RPM
Vibra-TITE
Part #
EXCEL ACCELERATOR
Cyanoacrylate
Accelerator.
18390
7701TM EXCEL POLYOLEFIN PRIMER
Cyanoacrylate Primer.
Clear /
Amber
7387TM STRUCTURAL ACTIVATOR
General structural activator. Light Brown
None
Structurals
www.vibra-tite.com
Loctite is a registered trademark and 312, 325, 326, 330, 392, 7380, 7649, 7113, 712, 7701 and 7387 are trademarks of Henkel Corp. USA.
17
EPOXY DISPENSE GUNS
BONDING PRODUCTS
Vibra-Tite Part #
E001
E002
E003
E004
E005
E006
E007
E008
include a wide range of materials such as
epoxies, hot-melts, urethanes, and MMA’s
designed to meet a variety of assembly
requirements. Ask your sales representative
for a complete list of dispensers and mix
nozzles.
HOT MELTS / SPRAY / URETHANES
Vibra-TITE
Part #
960
Available
Sizes
96005
5 lb Brick
961005
5 lb Brick
962005
5 lb Brick
963005
5 lb Brick
961
962
963
Product Description
Viscosity (cP)
@20 RPM
Color
Description
MANUAL DISPENSE GUN Plastic, 400 ml, 1:1 to 2:1 ratio
VARIABLE RATIO MANUAL DISPENSE GUN Metal, 200 & 400 ml, 1:1 to 10:1 ratio
MANUAL DISPENSE GUN 50 ml 1:1 ratio
MIX NOZZLE for 50 ml cartridges - 16 element
MANUAL DISPENSE GUN 50 ml 2:1 ratio
MIX NOZZLE for 400 ml cartridges - 24 element
DISPENSE NOZZLE for 300 ml cartridges - 1/4” NPT - 1/8” orfice by 2.5” length
DISPENSE NOZZLE for 300 ml cartridges - 1/4” NPT - cut-to-size orfice by 2.5” length
Max Gap
(Fill, in)
Fixture
Time
Specific
Gravity
Strength
Temp Range
36000
12.5 pli
-65°F to 200°F
0.91
36000@350F
12.5 pli
-65°F to 200°F
0.91
Up to
substrate
failure
-40°F to 200°F
90 Min
1.1
Mix Ratio Temp Range
Fixture
Time
Specific
Gravity
PRESSURE SENSITIVE HOT MELT
975
Amber
White
HOT MELT GASKETING COMPOUND
White
ADHESIVE SPRAY
97555
97518
55 gal Drum
5 gal Pail
985
Water based laminating
spray.
URETHANE POTTING ADHESIVE
50 mL Dual Cart Two part potting adhesive.
400mL Dual Cart 1:1 ratio.
98550
98540
987
POLYURETHANE
98730
300 mL
98902
98904
98954
98900
2 oz
4 oz
1 lb
1L
989
Non-sag one component.
URETHANE
General purpose
Light
Brown
7000
0.05
EPOXIES
Vibra-TITE
Part #
210
21006
21000
Available
Sizes
Viscosity
(cP)
REACT-A-PACK NO MEASURE EPOXY - SINGLE USE
Product Description
6 pack Clamshell Single Use epoxy pack. No mess,
no waste.
400pc Bulk
910
Color
100000
White
125000
0.25
1400
1:1
-65°F to 300°F
5 Min
1.1
25000
0.1
3500
2:1
-55°F to 200°F
120 Min
1.14
900000
0.1
5000
-55°F to 400°F
10 Min
1.4
Amber
8000
0.07
1500
-55°F to 200°F
240 Min
1.14
Color
Viscosity
(cP)
Max Gap
(Fill, in)
Shear Strength
(PSI)
Mix Ratio Temp Range
Fixture
Time
Specific
Gravity
Off White
100000
0.1
4600
1:1
-40°F to 250°F
10 Min
1.1
White
150000
0.125
2000
2:1
-40°F to 180°F
12 Min
1.1
Off White
100000
0.1
4500
10:1
-40°F to 250°F
5 Min
1.1
92050
92040
50 mL Dual Cart Compare to 3M™ DP420®, Loctite® White or
Black
400 mL Dual Cart E-20NS™
930
40°C to 100°C 30-60 Min
HIGH PEEL / HIGH SHEAR 2 PART EPOXY
HEAT CURE STRUCTURAL 1 PART
300 mL Cart
990
99050
99040
550 metal to metal
460 wood to wood
65 Nylon to nylon
2 PART EPOXY
50 mL Dual Cart Compare to 3M™ DP190®
400 mL Dual Cart
93030
Shear Strength
(PSI)
Clear to
Grey
91050
91040
920
Max Gap
(Fill, in)
One part, heat cure, structural
adhesive.
Grey to
Black
FLEXIBLE TOUGHENED 2 PART EPOXY
50 mL Dual Cart
400 mL Dual Cart
2:1
MMA’s
Vibra-TITE
Part #
281
Available
Sizes
28150
50 mL Cart
28237
28240
37 mL Cart
370 mL Cart
28550
50 mL Cart
282
285
Plexus®
Product Description
Part#
310 MMA 10 MINUTE
320
High strength.
MMA
Flexible.
300
MMA 5 MINUTE
General purpose.
Plexus is a registered trademark of Illinois Tool Works, Inc. Loctite is a registered trademark and E-20ns is a trademark of Henkel Corp. USA.
3M is a trademarks of Minnesota Mining and Manufacturing Company.
18
REACT-A-PACK
IT’S A FIRST
Two reactive EPOXY parts in the same pack
and with no barrier between them.
This new product makes for the cleanest, easiest
and most convenient use of epoxy adhesives ever!
Furniture
Wire Nuts
NO MEASURING!
NO MESS!
NO WASTE!
No drips
Typical Applications
• General purpose epoxy bonds plastic, steel, ceramic and wood.
Suggested Uses
• Electric: Sealing wire connectors, lawn sprinkler systems, pumps.
• Auto: Trailer wire connectors.
• Marine: Loose screws in fiberglass, wire connector seal & vibration proof.
• Home: General adhesive needs, furniture, loose wallboard hooks & screws, sealing, towel bars, fillet &
supports, candle holder sockets.
Anti Cam-Out
Fluid
Increases the grip strength
between the fastener
head and tool by
as much as
5
®
A must for
every tool box!
Vibra-TITE™ Bench Pack® 5
is a handy assortment of our
most popular threadlockers,
a retaining compound and
DriveGrip anti cam-out fluid
in a light weight clear plastic
container.
Part #27005
700%
Part #47002
.5 oz. Tube in cello bag for
easy display and handling.
•
•
•
•
•
•
•
BENCH
PACK
Use with:
• Screwdrivers of all kinds • Hex keys • Pliers • Vise Grips
• Channel locks • Open-end & box end wrenches
SPECIALTY PRODUCTS
React-A-Pack Epoxy is a system that delivers the advantages of a 2-part epoxy adhesive
in a single pack. Inside the pack the epoxy resin and hardener are separated by a
patented process. When mixed by mashing the hardener and resin together the product
becomes a five minute epoxy with the advantage of no mess and the correct mix ratio
in every pack.
Part #21006 – 6 Pack Clamshell
Part #21000 – 400 Pc. Bulk
DriveGrip®
Anti Cam-Out Fluid. Easily
remove or tighten screws!
Unlimited shelf-life
Odorless, non-toxic, non-corrosive
Works instantly, won’t irritate skin
Slotted Phillips Hex Square
Wipes clean, no staining
Works great in applications where fastener heads or drives are worn or damaged.
Eliminates tool wear, rounding, and deforming of fasteners.
Eliminates the need for specially designed screwdrivers.
Vibra-Tite 541
High Strength, Retaining
Compound
Vibra-Tite 121
Medium Strength,
Removable Threadlocker
Easy to apply
Reduces worker fatigue
Prevents stripped
screws
COMPETES WITH LOCTITE® 242®
Vibra-Tite 140
High Strength,
Threadlocker
Vibra-Tite 150
Wicking Grade Medium
Strength, Threadlocker
COMPETES WITH LOCTITE® 271™ COMPETES WITH LOCTITE® 290™
www.vibra-tite.com
Loctite and 242 are registered trademarks and 271, 290 and 680 are trademarks of Henkel Corp. USA.
19
CHEMICAL BLENDING, CUSTOM SERVICES,
TOLL BLENDING AND PRIVATE LABELING
Your Formula Supplied in Bulk or Bottle
ND Industries manufactures annually in excess of
1 million pounds of a wide variety of Vibra-TITE
Adhesives, Anaerobics, Cyanoacrylates, Epoxies,
Urethanes, Ultraviolets, MMA’s, Acrylics, and more
offering custom service formulation and toll blending
to meet specific customers’ needs.
COMMITTED TO YOU AND YOUR CUSTOMERS
Vibra-TITE products can be supplied to suit your specific needs. We are dedicated to providing innovative, affordable
products and services.
ND Chemical Blending offers services for:
• Toll Blending
• Supply (In Bulk or Bottle) of:
- Anaerobic Adhesives
- Threadlockers
- Retaining Compounds
- Sealants
- Structural Adhesives
- Cyanoacrylates
- 2 part Epoxies
- Urethanes
CREATE YOUR OWN UNIQUE BRAND IDENTITY
ND Industries manufactures many adhesives and sealants for private label use and can fill, label, and
package bottled products to your specifications. ND can also supply bulk materials if your company does
not require packaging services.
ND provides private labeling services including design and production with quantity requirements
substantially lower than our competitors.
20
VERSATILE, POWERFUL, COST-CUTTING TECHNOLOGY
In the high-tech world of manufacturing, tolerances are tight and specifications are rigid. Consequently,
locking, sealing, bonding, and assembly related products and processes designed to meet these
requirements are generally associated with high cost, and in many cases, slow response times. As
a vertically integrated supplier ND Industries provides cost effective, highly responsive alternatives
to products and services from companies such as Loctite®, 3M®, and others.
ND Industries provides top quality fastening and assembly related products and services,
specializing in threadlockers, sealants, anaerobics, lubricants, adhesives and more to a wide
range of industries including automotive, electronics, aerospace, marine, construction,and
appliance.
Our engineering and chemical research capabilities, along with a strong emphasis on
individualized problem solving, constantly lead us to the development of the most cuttingedge original technologies. That means new products with improved results.
A VERTICALLY INTEGRATED SUPPLIER
This means we do it all from top to bottom; we’re
a one-stop source providing design engineering,
custom chemical formulations and distribution.
Our in-house capabilities help us fulfill multiple
functions for our customers and, at the same
time , keep our overhead low. This allows us
to provide high quality products and services at
costs generally lower than our competitors.
TECHNOLOGY AND SERVICES
ND’s specialized team of chemists are second
to none. They are hard at work developing
customized applications to meet individual
customer’s needs.
ND Industries is ISO certified.
www.vibra-tite.com
21
INERT LOCKING
ND’s service centers can Pre-Apply ND products on ND-supplied or
customer supplied fasteners. The service centers are tooled with stateof-the-art fastener processing equipment to provide quality products
and rapid distribution.
ONE OF THE INDUSTRY’S BROADEST PRODUCT LINES
ND offers a wide range of fastening and assembly related products and
processes that exhibit one or more of the following characteristics:
Locking
Re-Useability
Noise and Vibration Reduction
Sealing
Cushioning
Minimization of Galling/Stripping
Bonding
Insulating
Masking
Identification
Temporary Retention
Lubricating
In order to assist customers in understanding ND’s current product line, the
products have been categorized by their function: Inert Locking, Reactive
Locking, Advanced Sealing, Masking and Lubricating, and Assemble EZ. In
addition to the products listed here, ND offers customized formulations for
your unique fastening and assembly needs.
ND STRIP®, ND PELL-IT®, SURE TEMP,
ND PELL-IT® SOFT TOUCH TIP
ND PATCH® & ND PATCH® 360˚ RING
VIBRA-TITE® VC-3® THREADMATE
ND inserts are offered in Nylon, KEL-F® or
VESPEL® which ND Industries automatically
inserts into a fastener, making it self-locking
and self-sealing, yet fully adjustable.
ND patch products make threaded fasteners
self-locking and self-sealing, while leaving
them fully adjustable. Compare to Tuf-Lok®
Vibra-Tite VC-3 Threadmate is not an
anaerobic or an adhesive. It is a unique blend
of acrylic resins that make any threaded
fastener self-locking and self-sealing, while
remaining service removable.
REACTIVE LOCKING
CUSTOMERS SERVED
With its growing family of fastening and assembly products and services, ND
meets or exceeds many of the rigorous standards established by the automotive,
aerospace, and defense industries.
Customers:
DAIMLERCHRYSLER
GENERAL MOTORS
FORD MOTOR COMPANY
BOEING
LOCKHEED MARTIN
JOHN DEERE
MACK TRUCK
CUMMINS ENGINE
VOLKSWAGEN
GENERAL ELECTRIC
Accreditations:
QS 9000 Registered
ISO 9002 Registered
ISO/IEC17025 Registered
AS 9100 Registered
EPOXY-LOCK®
ND MICROSPHERES®
EXPAND-A-SEAL ES0105®
QPL-18240 Listed
QSLM Registered
Epoxy-Lock is a powerful locking / sealing, ND Microspheres are offered in acrylic and Expand-A-Seal ES0105 is an original 2-inMember Industrial Fasteners Institute adhesive which is pre-applied to either male epoxy formulations, available in pre-applied 1 application and the most effective way to
or female threaded fasteners. Though the or bulk for application by other fastener coater simultaneously lock and bond fasteners and
adhesive surface is dry to the touch, the forces / converters. Compare to 3M™ Scotch-grip™, seal against all air and fluid leakage.
of engagement initiate a chemical reaction.
Loctite® Dri-Loc®, & omniTECHNIK Precoat®.
ADVANCED SEALING
ST-3®
ND PLASTISOL APPLIED-TO-METAL
ND PLASTISOL OPENMOLD
ND MASTICS & EXPANDABLES
SEALTEK™ 1120
ST-3 is designed to be applied by ND or on
the customer’s automated band coating
equipment or tumble coater. Compare to 3M™
Scotch-Grip™ 4291, and Loctite® VibraSeal® 516, 517, 503, and 503H.
ND Plastisol Applied-To-Metal provides
a positive seal that eliminates leaks. It is
available in a wide variety of durometers and
colors.
ND Plastisol Open-Mold are parts made of
moldable PVC materials that can seal, trim,
cushion, insulate and control noise and
vibration... often at a fraction of the cost of die
cutting and injection molding.
Crushable mastics evenly fill and seal all voids
and are applied by the assembler. Heat causes
the material in Expandables to expand and
adhere to metal, creating a seal while filling in
the gaps.
A medium viscosity, cure in place gasket.
This system forms a resilient, soft and
flexible gasket that can conform to almost any
dimensional surface. Cures rapidly with heat
or UV radiation.
ASSEMBLE EZ
MASKING & LUBRICATING
ANTI-SEIZE 917 COMPOUND
ND’s 917 Anti-Seize compound is a high
temperature lubricant formulated with
Nickel to prevent seizing, galling, pitting
and excessive wear and corrosion. Ideal
where different metals come in contact.
It will not wash or squeeze out.
22
ND LM-1293®
EZ Drive 300TM
An automotive approved process, ND An ergonomic assembly aid designed
LM-1293 is a Teflon®-type fastener to increase installation efficiency by
coating that lubricates and prevents reducing friction by as much as 75%
undesirable substances from adhering
to fastener threads. Compare to
Nycote®.
STAY-PUT®
ND COLOR CODE
Stay-Put provides temporary, yet
dependable retention for fasteners or
other components prior to and during
the assembly process.
Whether your need is to identify some
special characteristics or to color match
a fastener head to a mating surface, ND
is your source for color identification.
ND, ND Industries, ND Strip, ND Pell-It, ND Patch, Epoxy-Lock, ND Microspheres, Expand-A-Seal ES0105, ST-3, ND LM-1293, VC-3 and Stay-Put are registered trademarks and SealTek and EZ Drive 300 are trademarks of ND Industries, Inc. KEL-F, 3M and
Scotch-Grip trademarks of Minnesota Mining and Manufacturing Company. Loctite, Dri-Loc and Vibra-Seal are registered trademarks of Henkel Corp. USA. Teflon and Vespel are registered trademarks of DuPont. Precote is a registered trademark of Omnitechnik
Mikroverkapselungsges.mbh.Tuf-Lok and Nycote are registered trademarks of Nylok Fastener Corporation.
ND Pre-Applied Comparison Chart
ND NDUSTRIES PROCESS
COMPETES WITH
Anti-Seize 917
Loctite® Preapplied Anti-Seize, Nylok® Ny Plate®
Epoxy-Lock
3M™ Scotch-Grip™, Loctite® Dri-Loc®, Precote® 80
ND LM-1293
Nylok® Nycote®
ND Microspheres 293 / 593SA
ThreeBond 2446
ND Microspheres 593 Red
ThreeBond 2481
ND Microspheres 593S
3M™ Scotch-Grip™ 2353 & 4844, ThreeBond 2430
ND Microspheres 593SB
ThreeBond 2440 & 2440B
ND Microspheres 1193S
3M™ Scotch-Grip™ 2451 & 2510, ThreeBond 2440
ND Microspheres TA300
Precote® 30, ThreeBond 2471 & 2415
Precote® 80
Precote® 85, ThreeBond 2403 & 2411
ND Microspheres AA0695
Loctite® Dri-Loc® 200
Loctite® Dri-Loc® 202, ThreeBond 2457
Loctite® Dri-Loc® 204, ThreeBond 2475
Loctite® Dri-Loc® STS
Loctite® Dri-Loc® STS
ND Patch
Nylok® Blue Patch
ND Patch Hi-Temp
Nylok® Ny Temp®
ND Pell-It
Nylok® Blue® Pellet
ND Strip
Nylok® Torq-Strip®
NDEM223
L&L Products L1041
NDM97
L&L Products L1030, Forest City FC-XE-16, Chemseco 3002
Plastisol
Nylok® Ny Plas®
Sealtek 1120
Nylok® Ny Seal®, Anochrome Group® Rimlex®
ND ST-3-W
3M™ Scotch-Grip™ 4291
ND ST-3-L3
3M™ Scotch-Grip™ 4291
ND ST-3-L4
Precote® 5
ND ST-3-L5
Loctite® Vibra-Seal® 503
ND ST-3-L5A
Loctite® Vibra-Seal® 503HV
ND ST-3-L6
ND ST-3-L7
ND ST-3-L8
Loctite® Vibra-Seal® 503 mod
ND ST-3-L8A
Loctite® Vibra-Seal® 503 HVmod
ND ST-3-L10
Loctite® Vibra-Seal® 517 mod
ND ST-3-L11
Loctite® Dri-Seal® 506
ND ST-3-L13
Loctite® Dri-Seal® 513
Stay-Put
Nylok® Ny Stay®
ND, ND Industries, Epoxy-Lock, ND LM-1293, ND Microspheres and ST-3 are registered trademarks of ND Industries, Inc. 3M and Scotch-Grip are trademarks of Minnesota Mining and Manufacturing Company. Loctite, Dri-Loc, Dri-Seal and Vibra-Seal are
registered trademarks of Henkel Corp. USA. Precote is a registered trademark of Omnitechnik Mikroverkapselungsges.mbh. Nycote, Ny Temp, Ny Plate, Torq-Strip, Ny Plas, Ny Seal and Ny Stay are registered trademarks of Nylok
www.vibra-tite.com
23
REGISTERED TRADEMARK OF ND INDUSTRIES, INC.
To Place An Order Contact:
Within USA: ND Division #19 – Deltona, Florida
PH: 1-800-521-2663 • FX: 386-860-4521
Outside USA: ND Division #10 – Troy, Michigan
PH: 248-655-2580 • FX: 248-655-2582
Orders in Mainland China: ND Adhesive Technology (Shanghai) Co.,
Ltd – Jiading District, Shanghai
PH: 86-021-59959049 • FX: 86-021-59959045
ND Western
Fastener Processing Division
Santa Fe Springs, California
ND Southwestern
Arlington, Texas
ND Midwestern
Fastener Processing Division/Chicago
Northbrook, Illinois
Rockford, Illinois
ND Midwestern
Fastener Processing Division/Detroit
Clawson, Michigan
ND Technologies Group
Troy, Michigan
ND Midwestern
Fastener Processing Division/Cleveland
Twinsburg, Ohio
ND Southeastern
Charlotte, North Carolina
ND Eastern
Oakland, New Jersey
ND Industries Asia, Inc./Taiwan
Kaoshiung, Taiwan
ND Electronics (Kunshan) Co., Ltd.
Kunshan City, China
Corporate Offices
1000 North Crooks Road • Clawson, Michigan 48017 USA • Phone: 248-288-0000 • Fax: 248-288-0022
Visit our website at www.vibra-tite.com • email: adhesives@ndindustries.com

threadlockers • thread sealants • retaining

Transcription

Similar documents

What is Message in a Bottle? How does it work?

Please do not purchase RoseArt product for supplies. Their quality is

How to Read a Glass Bottle

swing top bottles

XiniX FreeBact 20 - Taikon Advisor Oy

Blow Molds

Water Xylophone - Abu Dhabi Science Festival

Fantastik - Sealed Air

Liquor Capabilities Presentation

Auction April 30th