price list 2016 - Fornaci Calce Grigolin SpA

Transcription

COLOURED FINISHINGS FOR BUILDING
PRICE LIST 2016
2
Fornaci Calce Grigolin S.p.A. is now one of the most important
Italian and international realities in the field of materials and
technologies for construction.
It has over forty years of experience gathered in construction
yards and R&D laboratories and looks to the future with an
aim to continuous development, product quality improvement
and implementation of support services provided by qualified
personnel. All with the goal of becoming the ideal partner for the
players in the construction industry.
The activity began in the 50s when Giobatta Grigolin invested
all his savings in buying a truck to transport sawdust and river
stones for many suppliers located along the river Piave. In 1963
the first Grigolin oven comes into operation. In 1974 Giobatta
Grigolin is joined in the management of the company by his sons
Maurizio and Roberto, who learned responsibility at an early
age. Indeed, when in 1978 Giobatta is missing, the two children
take over the administration of the firm without hesitation. A few
years later, the company structure is planned: Renato joined the
group as the last of the four children of Giobatta and Irma, and
everyone assumes precise roles and responsibilities. The late80s
saw the birth of the production of plaster and masonry mortar,
supplied directly on site by means of silo, and the deployment
of the new hydrated lime plant. In the 90s a new furnace was
install, operated on a 24-hour basis by a sophisticated central
computer. At the same time starts the use of sawdust as fuel
in lieu of methane by using a gentle flame cooking of the lime,
obtaining in this way the patent of the Ministry of Industry. Since
2000, Fornaci Calce Grigolin establishments begin to expand in
the area: Medesano (PR), Bosco Marengo (AL), Borgoricco (PD),
Zandobbio (BG), Nuvolera (BS), San Vito al Tagliamento (PN) and
Colleferro (Rome), the latter being the largest premix plant in Italy.
Since 2002, Grigolin is also present in Germany with the opening
of the Ettlingen establishment and with the acquisition in 2004 of
a consortium of storage buildings, now called arteMURI GmbH. In
2006 “Grigolin SA” was established in Switzerland, while a new
store has been opened in Slovenia. In the same year, Grigopronto
service was activated, a system of equipment delivery directly
on site. Also in 2006, within the Medesano (PR) establishment,
Colorificio was launched: a modern and technologically advanced
service, capable of offering the consumer a wide range of high
quality products. The geographical expansion, technological
innovation and the presence of highly qualified staff have allowed
Fornaci Calce Grigolin to become a leader in the field and to
express its value through:
- Large systems of synergies;
- Diversification and vertical integration of productive
sectors;
- Technological development and applied research;
- Continuous attention to environmental values.
Preserving the past
Building the future
In 2013 Fornaci Calce Grigolin reached the prestigious milestone
of 50 years of activity in the construction and building industry.
3
Colour Project
arteMuri is a paints and finishings line of Fornaci Calce Grigolin; thanks
to these products of high quality and advanced technology, the company
presents itself as a unique supplier for a whole application cycle, from
primers to finishings.
The experienced gained during years spent on building sites and the
studies done by our technical staff and the R&D laboratory developed into 5
product classes, which differentiate from each other with the type binders
used: acrylics, siloxanes,silicates and lime. Additional to these 4 classes
is the specials class, made of highly technological products, specifically
thought for the base preparation and for the finishings.
Tradition, quality and innovation
The arteMURI line distinguishes itself with an
original packaging, a rich Exterior finishings palette
added by the NCS 1950 colours ( worldwide leader in
colours selection technology), to satisfy each single
chromatic request.
The use of the colour machine and the diffusion of
our tintometric system provide quickly the customer
with product samples that reproduce the same colour
in the same quality of the final work effect. The
wide range of solutions of the arteMURI line offers
an efficient synergy and integration with the other
4
Fornaci Calce Grigolin products, for new buildings,
restoration and eco-building, thermal insulating
systems, concrete surfaces and humid walls
restoration. Our factories and warehouses in Italy
cover a good geographical area for a quick delivery,
also for small quantities, directly to the customer. We
want to offer our customers the best possible result,
as a single cycle, in which the various elements are
binding for a single target: give customers the result
they expect….and even more!
5
General sale conditions
The present price list voids and replaces the previous ones
Orders
The present sale and delivery conditions are considered accepted by the Buyer who is submitting and undersigning the order. Eventual exceptions are valid only if specifically agreed in writing.
The minimum order of white or coloured is 33 vases of 25 kg each.
Order confirmation
All orders must be submitted in writing and are considered valid only after our approval.
The Buyer, after order submission, is implicitly accepting our general sale conditions, confirming to be aware of the products characteristics and of the application method. Fornaci Calce Grigolin warns the wrong and improper use
of its products and recommends to follow the instructions given on its technical sheets and on its buckets or labels regarding the application method.
The Seller reserves the right to accept or suspend the order in full or partially, even if already accepted, especially when the order processing is impossible due to unforeseen factors, economically unsustainable, or for force majeure
such as production breakdowns or missing raw materials. The Buyer is due to accept the partial order and gives up any indemnity right or whatever compensation for delivery delay.
Credit Limit
The order acceptance is depending on the credit limit assigned to the customer. The value is defined by the sum of the orders already delivered and not paid yet, on top of the existing orders not yet invoiced.
The credit limit is established at the beginning of the cooperation and is annually confirmed; unless often unpaid due amounts or heavy delays in payment, in this case the credit limit could also be cancelled.The supply will be cut
whenever in accounting there is an open amount of unpaid sums or for overdue invoices not paid yet.
Prices
Prices are referring to the latest updated valid price list at order’s placing time, net of any fiscal duty (VAT) and are expressed in Euro (€). The company Fornaci Calce Grigolin reserves the right to modify the price list with no prior
notice. In any case, with a new price list introduction that is voiding and replacing the previous one, also the particular quotations both for normal products and products to be produced on specific Customer’s request automatically fall.
The Company guarantees the quality level of the products available, but reserves the right to implement technical modifications which are necessary to the products and packagings.
Orders for colours developed on specific samples or colours different from our colours cards are subject to an extra cost that will be confirmed time by time from our commercial office.
For the production of colours not realized with the tintometric system, the Company reserves the right to deliver the orders with an excess of 2-3 buckets on the quantity ordered.
Samples
Samples of arteMURI products will be delivered and invoiced at the following prices:
- art. 699997 - paint sample (0,75 lt) - € 4,44 /bucket
- art. 699996 - coating sample (2,5 kg) - € 7,92 /bucket
Prices are understood as net and not discountable. Possible transit via courier fees will be charged separately.
Return conditions, delivery terms and shipping
For the execution of products present in our price list, the order processing will be within 10 days from order receiving date. The delivery terms, even if agreed, are not compelling as they depend on various variables and unforeseen
situations, therefore the Company is not due to any compensation to the Buyer if not respecting them.
The goods must always be picked up by the Buyer. Regardless of destination and sales conditions, the delivery is intended as Ex Factory our Medesano (PR) factory or any other Fornaci Calce Grigolin entity, such as production site
or warehouse referring to the order.
Transportation
For each shipment the Buyer is due to pay a contribution on the transport cost equal to € 0,75 per Bucket for Italy and € 1 for Europe.
Goods are travelling always at Buyer’s own risk, even when it is delivered to final destination (DAP).It is responsibility of the Buyer to control the goods when received. Eventual irregularities, quantity shortage or defects of any kind,
in particular number of pieces, weight, bucket damages, must be claimed immediately to the forwarder in writing on the transport document or delivery receipt, with forwarder’s counter signature. This document must be sent to our
Company in order to claim the irregularity back to the forwarder. Claims for goods irregularities will be accepted only if executed according to the law.
Eventual claims do not entitle the Buyer to suspend or delay the payment of the goods which are claimed or of other deliveries already effected.
Payment terms
Only payments effected in our company’s various plants or offices, or to a person authorized in writing to collect the payment are accepted. Payment must be arranged for the total amount of the invoice and must be done within the
established time limit, without any discount or reduction, except those previously agreed. Payments via Bank transfers are subject to the cash withdrawing costs and eventual stamp duty.
The Seller reserves the right of ownership of the tintometric machines and provided tools until the entire due amount has been paid.
Overdue interests
In case payment terms are not duly respected an overdue interest will be applied based on the official discount rate increased of 7% starting from the day in which the payment was first due. Furthermore, on top of the unpaid amounts,
there will be bank costs and debt collection costs. In case of overdue payments, the Seller has the right to suspend the existing orders and, at its discretion, close the Contract.
Packagings
Following the CEE Norms and the National Laws, on the price list are clearly indicated the packaging mode and the sales unit of our products: volum (1), net weight (kg). Together with the products the sale is extended also to their
containers/packagings, at the price and conditions existing at the time of shipping. The withdraw and dismantling of the empty containers are, in each phase, on account of the product user (D.P.R. 915/1082).
As regards the pallets, they will be charged with a caution of € 12+ VAT per pallet. If returned in good conditions, they will be reimbursed for an amount of € 10,50 + VAT each.
Every pallet may contain: 80 buckets of 5 lt or 33 buckets of 14 lt, 15 lt or 25 kg
Returns
We do not accept returns which have not been previously authorized by us in writing.
Warranty
Our products are produced, controlled and selected for the sale only if they satisfy our standards. Fornaci Calce Grigolin does not offer any warranty for improper or wrong use of our products, therefore in case of eventual damages
of any kind the Company will not be responsible for any kind of reimbursement.
Claims
Claims for defects or non compliance of the goods must be communicated immediately and the claim must be sent to our offices in writing form. For an eventual control, in the written claim must be clearly indicated, on top of all
the products indications, also the production batch number reported on the label.In case of goods replacement, this must always be authorized from Fornaci Calce Grigolin which will not accept any kind of reimbursement or any
other kind of request.
Claims for price differences and/or discounts must be received within 30 days from the invoice date, indicating to the Company every detail of the document.
Colours made with the tintometric machine
Before selling to the final end user, the retailer must check the compliance of the colours realized with the tintometric system. Doing so, the colours differences can be corrected before the product application. Fornaci Calce Grigolin
therefore will not be responsible for eventual claims or reimbursement requests from the final end user for colours differences.
Norm D.L. 161/2006
The VOC values on labels, packagings and technical sheets of the products are valid only using the indications of dilution and the tintometric pastes of Fornaci Calce Grigolin. The final end user, as per law, is responsible for the
different values of VOC introduced in the environment if he does not respect the given indications.
Competent Court
Any kind of dispute on the contract or product, or related to them, will be submitted to the judgement of the only competent Court of Treviso.
Note art.13 D.Lgs. 196/2001 Privacy Code. Your personal data in our hands will be used for commercial, administrative and financial purposes and might be disclosed to our people in charge of the related functions. Your data
are not for distribution. Your rightsas per art. 7 of the D. Lgs. 196/2003 will be duly respected.You can find the full note on our website www.fornacigrigolin.it . The information included in the present communication and the related
attachments can be confidential and are anyhow exclusively reserved to the people or the Company as above mentioned.
The distribution and/ or copy of the document set by any person different from the receiver is forbidden, as per art. 616 c.p. and D.Lgs. 196/2003.
Title Holder
Fornaci Calce Grigolin spa
6
Index
Acrylics
Fixatives and primers
Interior finishings
Exterior finishings
pag.10
pag.11
pag. 14
Siloxanes
Exterior finishings
Decorative finishings
pag. 1 8
pag. 1 9
pag. 2 1
Elastomerics
Primers
Exterior finishings
pag. 24
pag. 2 5
Silicates
Exterior finishings
pag. 2 8
pag. 2 9
Lime
Exterior finishings
pag. 3 2
pag. 3 3
Specials
Surface preparation
Exterior finishings
pag. 3 6
pag. 3 9
pag. 4 0
Application cycles
pag. 42
Artemuri tintometric system
Tintometric bases
Coloring pastes
Equipment and accessories
pag. 48
pag. 49
pag. 53
pag. 54
Icon legend
Dilute with water
Apply airless or with spray
Preparation with metallic spatula
Dilute with solvent
Apply by machine
Preparation with sponge float
Mix with drill
Apply manually
Preparation with toothed trowel
Apply with brush /
flat brush/ mounted
Preparation with stainless steel
Paintable with tintometric system
Apply with roll
Preparation with plastic spatula
7
8
Versatile
Quality/price
Wide range of colours
Acrylics
Acrylics
Acrylics · interior finishings
A wide palette of fades, effects and colours on which to choose the right sensation, a world of
water based finishings for any kind of use, easy to apply and long lasting.The acrylic binder
presents an extreme versatility in the formulation of a wide range of products: primers, interiors
finishing of high quality, high protection quality products for exteriors, various grain intonachinos.
Products which are conferring to the final cycle an elevated adherence, flexibility, durability,
waterproofing, resistant to abrasion and to alkalines, to weather conditions, UV rays and
microorganisms. A wide selection of colours available which allows to propose the most requested
colours. And all this with a perfect relation between quality and price.
Fixatives and Primers
UNO FIX
PRIMO
Interior finishings
UNO LIGHT
UNO ECO
UNO IN
UNICO
uno SMART
UNO TRASPIRA
UNO ANTIMUFFA
UNO TEX
UNO LAVABILE
ESATHERM
POWER LUX
MURI ONE
Exterior finishings
UNI-VAL
beton-one
quarz-one
uno fill
uni-ka
ONE COAT COMPATTO 1,2-1,5 mm
one coat 0,7-1-1,2-1,5-2-3 mm
9
Acrylics · fixatives and primers
UNO FIX
Water-based, transparent, acrylic insulator. It is an excellent mural fixative, suitable for any type of
wall surface as background preparation for smooth, quartz, or filling finishes and coatings to a thickness of
acrylic class.
∙ Bucket: 1 lt / 5 lt / 15 lt
∙ Diluition: 1:3 with water
∙ Theoretical yield: 25 m2/lt
∙ Consumption: 0,04 lt/m2 Cod.
110115
110150
110101
base
0000 transparent
0000 transparent
0000 transparent
Bucket lt
15
5
1
€/lt
4,32
5,19
6,30
€/Bucket
64,80
25,96
6,30
primo
Water-based pigmented acrylic base. It is used successfully as background base, white or colored, on
mortar plaster based on hydraulic lime-binder rough or finished, irregular and difficult to cover surfaces,
such as old paintings in strong tones or where there are traces of stucco work and small imperfections, to
be completed by finishes, plasters, thick coatings in clear tones and in painting with bright shades on limited
coverage.
∙ Bucket: 14 lt
∙ Diluition: 15-25% with water
∙ Consumption: 0,14 lt/m2 ∙ Theoretical yield: 7,1 m2/lt
∙ Grain size: 0,3 mm
Cod.
110551
110581A
110581B
110581C
base
0100 white
traditional colors cat. A
trendy colors cat. B
prestige colors cat. C
Bucket lt
14
14
14
14
€/lt
4,73
5,00
6,38
8,65
€/Bucket
66,22
70,00
89,32
121,10
Finishing paint for professional indoor use. Equipped with high coverage, easy to apply, matte and
transpiring, it guarantees a high-quality appearance to the surfaces treated. Product with low voc and free
solvent.
∙ Bucket: 14 lt
∙ Theoretical yield: 4,2 m2/lt in two layers
120541
base
0100 white
Bucket lt
14
€/lt
1,86
NEW
UNO LIGHT
€/Bucket
26,00
White paint for interiors. Transpiring and covering paint, solvent-free and with low VOC content. The product
is easy to apply and allows for the obtaining of an opaque film aspect and an aesthetic and uniform coverage,
With good transpirability and good distension.
∙ Bucket: 14 lt
121551
10
base
0100 white
Bucket lt
14
€/lt
1,91
€/Bucket
26,74
NEW
UNO eco
Acrylics
UNO IN
Professional mural painting for interior surfaces. Transpiring, covering water paint, solvent-free and low VOC
content. The product is easy to apply thanks to the remarkable workability and distension. It allows for the obtaining
of an aesthetic covering and homogenous result and an opaque aspect of the film.
∙ Bucket: 14 lt
∙ Consumption: 0,11 lt/m2 ∙ Theoretical yield: 4,5 m2/lt in two layers
Cod.
122051
base
0100 white
Bucket lt
14
€/lt
2,43
€/Bucket
34,02
UNico
Filling and covering interior paint. Smooth water paint, velvety and transpiring, solvent-free and with
low VOC content. It is easy to apply, it has a good expansion capacity and a high fullness characteristic that
makes the product suitable for painting interior premium wall surfaces, giving a homogenous and opaque
appearance.
∙ Bucket: 5 lt / 14 lt
Cod.
122551
122550
base
0100 white
0100 white
Bucket lt
14
5
€/lt
2,88
3,40
€/Bucket
40,35
17,00
UNO SMART
Extra white transpiring paint for interiors. Product at a very high degree of whiteness, good coverage
and low VOC content, suitable for interior wall surfaces.
∙ Bucket: 14 lt
∙ Consumption: 0,10 lt/m2 ∙ Theoretical yield: 5 m2/lt in two layers
Cod.
123040
base
0100 white
Bucket lt
14
€/lt
3,46
€/Bucket
48,45
UNO traspira
High-coverage, breathable paint for interior surfaces. Transpiring water paint, solvent-free and with
low VOC content. It has an opaque, smooth and velvety appearance and it is highly resistant to friction.
It is easy to apply, it has a good expansion capacity and point of white, the product results in a high-quality,
decorative aspect which makes it ideal for all types of interior walls.
Cod.
123051
123050
123081A
123080A
base
0100 white
0100 white
Bucket lt
14
5
14
5
€/lt
4,15
4,94
4,40
5,25
€/Bucket
58,10
24,72
61,60
26,27
11
UNO antimuffa
Sanitizing transpiring paint for interiors. Solvent-free and with low VOC content, with a mixture of
broad-spectrum biocidal additives that counteracts the emergence and proliferation of molds, fungi and
algae. The product has a matt and opaque appearance, it has excellent breathability and it is easy to clean,
it is easily applicable, like a classic interior water paint.
∙ Dilkuition: 35-50% with water
Cod.
123551
123550
123581A
123580A
base
0100 white
0100 white
Bucket lt
14
5
14
5
€/lt
4,87
6,17
5,14
6,38
€/Bucket
68,20
30,85
72,00
31,93
UNO TEX
Opaque washable paint for interiors. Product solvent free and with a low VOC content. With good
coverage and excellent whiteness, suitable for interior fittings. It has good transpirability and good
cleanability and resistance to rubbing.
Resistance to washing > 1.000 cycles, according to UNI 10560
Cod.
126051
126050
126081A
126080A
base
0100 white
0100 white
Bucket lt
14
5
14
5
€/lt
4,35
5,20
4,55
5,46
€/Bucket
60,90
26,01
63,70
27,30
UNo lavabile
Super-covering washable paint for interiors. It has excellent resistance to rubbing and washing,
good permeability to water vapor and a high covering power. The product is solvent free and with low
VOC content, it allows for the obtaining of decorative finishes with multiple shades and hues for the
interior decoration, with a a film with a pleasant look, opaque and velvety.
Cod.
124051
124050
124081A
124080A
124081B
124080B
124081C
124080C
12
base
0100 white
0100 white
Bucket lt
15
5
15
5
15
5
15
5
€/lt
5,82
6,90
6,52
7,41
8,03
9,27
8,92
10,30
€/Bucket
87,30
34,51
97,80
37,08
120,51
46,35
133,90
51,50
Acrylics
ESATHERM
Mold-resistant, thermal-insulation, anti-condensation paint for interiors. It has particular insulating
microparticles that enable it to solve problems related to thermal and acoustic insulation. It reduces the heat
exchange between the environment and support. The product is indicated for the painting of rooms which
are particularly wet, poorly ventilated, with high condensation, such as kitchens, bathrooms, etc.
∙ Bucket: 5 lt
Cod.
623350
base
0100 white
Bucket lt
5
€/lt
11,53
€/Bucket
57,68
power lux
NEW
Specific finishing for plasterboard. Water-based paint with very high covering, defects camouflage
and matt effect, good white tone and highly washable. Particularly suitable for the preparation of difficult
surfaces such as interior plasterboards and gypsum-based plaster finishing. With low VOC content allows a
good coverage already with one application.
∙ Consumption: 0,10 lt/m2 ∙ Theoretical yield: 5 m2/ltin two layers
Cod.
124073
124074A
124071
124072A
base
0100 white
0100 white
Bucket lt
5
5
14
14
€/lt
8,40
9,00
8,21
8,70
€/Bucket
42,00
45,00
115,00
121,80
muri one
Mural enamel, superwashable, odourless, for interior applications. Water-based product with
excellent resistance to washing and rubbing, solvent free and low-VOC. It is suitable for use in public spaces,
environments with high human presence, stairwells and lower sides of various types of walls and it is
suitable for painting environments where food is present.
Complies with requirements of the
HACCP hygienic control system
Suitable for paintings in the presence of
food products, according to
UNI 11021:2002
Cod.
125051
125050
125081A
125080A
125081B
125080B
125081C
125080C
base
0100 white “glossy”
traditional colors cat. A “glossy”
traditional colors cat. A “glossy”
trendy colors cat. B “glossy”
trendy colors cat. B “glossy”
prestige colors cat. C “glossy”
prestige colors cat. C “glossy”
Bucket lt
15
5
15
5
15
5
15
5
€/lt
9,75
11,68
10,25
12,27
13,15
15,79
16,15
19,36
€/Bucket
146,25
58,41
153,75
61,39
197,25
78,95
242,25
96,82
125551
125550
125581A
125580A
125581B
125580B
125581C
125580C
0100 white “satin”
traditional colors cat. A “satin”
traditional colors cat. A “satin”
trendy colors cat. B “satin”
trendy colors cat. B “satin”
prestige colors cat. C “satin”
prestige colors cat. C “satin”
15
5
15
5
15
5
15
5
9,75
11,68
10,25
12,27
13,15
15,79
16,15
19,36
146,25
58,41
153,75
61,39
197,25
78,95
242,25
96,82
13
Acrylics · exterior finishings
UNI-VAL
Anti-algae ultra-washable smooth finish for exterior surfaces. Smooth high coverage water paint without
quartz, has a good water vapor permeability, excellent resistance to alkali, a high resistance to rubbing, washing
and a low dirt retention. It has a special mixture of active ingredients with broad spectrum of action that protect the
proliferation of mold, fungi and algae.
∙ Bucket: 15 lt
Cod.
135051
135081A
135081B
135081C
base
0100 white
Bucket lt
15
15
15
15
€/lt
8,29
8,71
11,19
14,37
€/Bucket
124,38
130,65
167,89
215,69
Resistance to washing > 10.000 cycles, CERTIFIED according to UNI 10560
beton-one
Protective anti-algae and anticarbonatation paint for concrete. Specific for application on
surfaces of concrete, cement and fiber cement compounds. It has a barrier against the passage of
carbon dioxide and is weather and UV rays resistant.
∙ Bucket: 15 lt
Cod.
137551
137581A
137581B
137581C
base
0100 white
Bucket lt
15
15
15
15
€/lt
7,57
7,95
10,11
12,87
€/Bucket
113,56
119,28
151,72
193,13
Suitable as anti-carbonation barrier according to UNI EN 1062-6: 2003,
permeability CO2 Sd = 347,95 m (class C1 > 50 m). Resistance to washing > 10.000 cycles.
quarz-one
Quartz finish for exterior surfaces. The product has a high filling and covering power, it is very
resistant to alkali, weathering and a low resistance to dirt.
Cod.
136551
136550
136581A
136580A
136581B
136580B
136581C
136580C
base
0100 white
0100 white
Bucket lt
15
5
15
5
15
5
15
5
€/lt
4,94
5,93
5,21
6,25
7,21
8,24
9,98
11,33
€/Bucket
74,16
29,67
78,18
31,27
108,15
41,20
145,35
56,65
UNo fill
Anti-algae filling finish for exterior surfaces. High coverage finishing paint suitable for outdoor
applications, both on new buildings and in urban renovation works. It has a high resistance to
weathering and UV rays, and excellent properties against the engraftment of algae and mold.
∙ Bucket: 15 lt
Cod.
136051
136081A
136081B
136081C
14
base
0100 white
Bucket lt
15
15
15
15
€/lt
7,03
7,40
9,51
12,22
€/Bucket
105,53
111,09
142,76
183,40
Acrylics
Acrylics · exterior finishings
uni-ka
Anti-algae, structural finish with average particle size. . It may be used to pre-treat surfaces which
are difficult to cover, irregular and uneven, internal, where a rough effect is intended, like fine mortar, on
smooth surfaces like plasterboard, paintings and concrete curbs.
∙ Bucket: 15 lt
Cod.
137051
137081A
137081B
137081C
base
0100 white
Bucket lt
15
15
15
15
€/lt
5,40
6,03
7,31
9,34
€/Bucket
81,12
90,54
109,70
140,14
ONE COAT Compatto 1,2 - 1,5 mm
Anti-algae acrylic intonachino for exterior surfaces. Fiber-reinforced in-depth finishing with compact
effect. It is a special coating suitable for the protection and decoration of the exterior surfaces of new
buildings and renovation work in urban construction.
∙ Bucket: 25 kg
∙ Diluition: ready to use
∙ Consumption: 1,8-3 kg/m2
∙ Theoretical yield: 0,30-0,55 m2 /kg depending on the size of employed particles
Cod.
1390
Cod.
139051
139083A
139083B
139083C
Cod.
1390
Cod.
139053
139085A
139085B
139085C
particle size mm
1,2
base
0100 white
particle size mm
1,5
base
0100 white
Theoretical yield m2/kg
0,45-0,55
Bucket kg
25
25
25
25
layers
1
€/kg
2,37
2,52
3,24
3,91
0,30-0,35
Bucket kg
25
25
25
25
€/Bucket
59,49
63,09
81,12
97,85
layers
1
€/kg
2,37
2,52
3,24
3,91
€/Bucket
59,49
63,09
81,12
97,85
ONE COAT - KUNSTHARZPUTZ K 0,7-1-1,2-1,5-2-3 mm
Anti-algae acrylic intonachino for exterior surfaces. Fiber-reinforced in-depth finishing available
in different particle sizes. It is a special coating suitable for the protection and decoration of the exterior
surfaces of new buildings and renovation work in urban construction.
∙ Bucket: 25 kg
∙ Consumption: 1,6-4 kg/m2 depending on the size of employed particles
ETA 05/196 - ETA 13/0001
CERTIFIED product for thermal
insulation systems
Cod.
1385
1387
1389
1391
1393
1395
Cod.
- 52
- 84A
- 84B
- 84C
13/0001
particle size mm
0,7
1
1,2
1,5
2
3
base
0100 white
0,31-0,39
0,50-0,60
0,45-0,55
0,30-0,35
0,28-0,33
0,25-0,28
Bucket kg
25
25
25
25
layers
2
1
1
1
1
1
€/kg
2,37
2,52
3,24
3,91
€/Bucket
59,49
63,09
81,12
97,85
Acrylic finishing coat to complement the Grigotherm System › pages 42-43
Minimum order for white or colored: minimum order nr. 33 buckets of 25 Kg
15
High protection
Water-repellent
Pearl effect
Transpiring
Anti-Algae
Siloxanes · exterior finishings
Siloxanes
Siloxanes
Water drops are slipping away on theskin, the surfaces breath, enriched with pearl like colours.
The products obtained with the siloxane binder are extremely versatile and effective, suitable for
any kind of surfaces and base. They offer a high permeability to water steam, together with a
better and longer lasting resistance thanks to high waterproofing, low dirt’s retention, resistance
to weather conditions and to light.They can be defined as the top product for exteriors because
they do not change in time.
primer 2W
F2 coprente
Exterior finishings
xilan duel
xil2 fill
bis
xil2 into 0,7-1-1,2-1,5-2-3 mm
due si compatto 1-1,2-1,5-2-3 mm
doppia vela
17
Siloxanes · fixatives and primers
primer 2w
Water-based transparent siloxane fixative. The product has excellent resistance to alkali, high bonding power
and the ability to penetrate inside the pores of the treated support that allow it to contain the crumbling and the
loose parts of any cementous support and confer high water repellence to the painting cycle.
∙ Consumption: 0,10 lt/m2 ∙ Theoretical yield: 10 m2/lt
Cod.
210815
210850
base
0000 transparent
0000 transparent
Bucket lt
15
5
€/lt
6,70
8,05
€/Bucket
100,50
40,25
F2 coprente
Pigmented acryl-siloxane base. The product has an excellent binding and adhesion power, high filling
features and an exceptional ability to standardize the irregular absorption of the treated wall surface. It has
the property to create a rough surface that promotes adhesion of subsequent layers of any thick finishes of
the siloxane class.
∙ Bucket: 14 lt
Cod.
211051
211081A
211081B
211081C
00
18
base
0100 white
Bucket lt
14
14
14
14
€/lt
5,73
6,05
7,73
10,43
€/Bucket
80,22
84,70
108,22
146,02
xilan duel - SILICONHARZFARBE
Cod.
236151
236181A
236181B
236181C
base
0100 white
Bucket lt
15
15
15
15
€/lt
10,81
11,36
14,60
18,77
Siloxanes
Anti-algae, smooth siloxane finish, for exteriors. It provides excellent water repellency and
transpirability, is ideal for the protection and decoration of new and old buildings.
Designed for use as a finish on dehumidifying plaster in restoration systems.
∙ Bucket: 15 lt
€/Bucket
162,23
170,42
219,09
281,66
Permeability to water vapor Sd = 0,058 m (class C1 > 50 m)
Water absorption W24= 0,085 Kg/m2 h 0,5
xil 2 Fill
Anti-algae, acryl-siloxane filling finish for exteriors. High protection and decoration finishing for
outdoor application. It equipped with excellent permeability, water repellence, high covering power and filling,
excellent resistance to atmospheric agents and UV rays.
∙ Bucket: 15 lt
236651
236681A
236681B
236681C
base
0100 white
Bucket lt
15
15
15
15
€/lt
8,11
8,54
10,98
14,11
€/Bucket
121,75
128,24
164,70
211,67
BIS
Anti-algae acryl-siloxane structural finish with average grain size. Suitable for protection and
decoration of surfaces hard to cover and regulate. It may also be used as base and grip coat for surfaces
which are difficult to cover or irregular, to be subsequently finished with other products of the same siloxane
class.
∙ Bucket: 15 lt
Cod.
237151
237181A
237181B
237181C
base
0100 white
Bucket lt
15
15
15
15
€/lt
7,03
7,40
9,51
12,23
€/Bucket
105,53
111,09
142,76
183,55
19
XIL 2 INTO - SILICONHARZPUTZ K 0,7-1-1,2-1,5-2-3 mm
Anti-algae, siloxane intonachino for exteriors. Special fiber-reinforced thick finish with a variable
size intonachino effect. Suitable for use on historic facades, for the plastering of new buildings, in
renovation works on urban construction and on restoration plaster which require a low resistance to vapor
diffusion.
∙ Bucket: 25 kg
ETA 05/196 - ETA 13/0001
insulation systems
Cod.
2376
2378
2380
2382
2384
2386
Cod.
- 52
- 84A
- 84B
- 84C
particle size mm
0,7
1
1,2
1,5
2
3
base
0100 white
0,31-0,39
0,50-0,60
0,45-0,55
0,30-0,35
0,28-0,33
0,25-0,28
Bucket kg
25
25
25
25
layers
2
1
1
1
1
1
€/kg
3,67
3,89
4,97
5,97
€/Bucket
91,93
97,34
124,38
149,35
13/0001
Acrylic finishing coat to complement the Grigotherm System › pages 42-43
Anti-algae, acryl-siloxane intonachino for exteriors. Fiber-reinforced thick finishing coat with a
variable size compact intonachino effect. It also has excellent water repellency and vapor permeability.
∙ Bucket: 25 kg
Cod.
2390
2392
2394
2396
2398
Cod.
- 52
- 84A
- 84B
- 84C
particle size mm
1
1,2
1,5
2
3
base
0100 white
0,50-0,60
0,45-0,55
0,30-0,35
0,28-0,33
0,25-0,28
Bucket kg
25
25
25
25
20
layers
1
1
1
1
1
€/kg
2,95
3,12
4,05
4,92
€/Bucket
73,75
78,00
101,25
123,00
NEW
DUE SI compatto 1-1,2-1,5-2-3 mm
Siloxanes · decorative finishings
doppia vela
Cod.
245580A
245582A
245580B
245582B
245580C
245582C
base
Bucket lt
5
1
5
1
5
1
€/lt
13,90
19,57
16,48
23,69
19,54
28,68
Siloxanes
Highly water-repellent, anti-algae, acril-siloxane antique canvas. Protective decoration that
shows excellent water repellence combined with a high breathability. The product gives the surface an
aspect which reproduces the plasters of old and vintage paintings canvas of the past. Before applying the
decoration, preparing the base with a siloxane paint.
∙ Consumption: 0,07 lt/m2 (on intonachino)
∙ Theoretical yield: 14 m2/lt (on intonachino)
2
0,03 lt/m (on smooth surfaces)
33 m2/lt (on smooth surfaces)
€/Bucket
69,53
19,57
82,40
23,69
97,70
28,68
21
22
Elasticity
Protection
Micro-cracks solution
Elastomerics · exterior finishings
Elastomerics
A real elastic skin, lasting in time, able to stand the variations and the small movements of cracks
and micro-crazes caused by thermal excursions.
Specific application cycles with proper thicknesses of these products enable to do a veritable
lifting against problems of plaster’s discontinuity, and to recover the wall’s homogeneity damaged
by micro-cracks.
Elastomerics
Primers
FONDO 03
Exterior finishings
ELASTER FILL
ELASTER 1,2-1,5-2 mm
23
Elastomerics · primers
fondo 03
Elastomeric filling base with average particle size. The product keeps its high elasticity over time and
even at low temperatures. It is used as background layer on hard to fill surfaces or with the presence of
small mural crannies, before use of other exterior finishes of the elastomer class.
∙ Bucket: 14 lt
∙ Theoretical yield: 5,5 m2/lt
∙ Consumption: 0,18 lt/m2 ∙ Grain size: 0,3 mm
Cod.
310351
310381A
Installation sequence.
24
base
0100 white
Bucket lt
14
14
€/lt
7,82
8,58
€/Bucket
109,48
120,12
Elastomerics · exterior finishings
elaster fill
Anti-algae filling elastomeric finish. The product keeps its high elasticity over time and even at low
temperatures. It has high filling power which allows to level small irregularities on the wall surface. A special blend
of active ingredients with a broad spectrum of action prevents the surface from the growth of molds, fungi and
algae.
∙ Bucket: 15 lt
base
0100 white
Bucket lt
15
15
15
15
€/lt
9,73
10,21
13,14
16,90
€/Bucket
146,01
153,27
197,15
253,59
Elastomerics
Cod.
336251
336284A
336284B
336284C
Elaster 1,2-1,5-2 mm
Anti-algae elastomeric intonachino. Fiber-reinforced protective coating based on special elastic
polymers. Easy to apply, the product has a high elasticity at low temperatures and good resistance to
weathering and low dirt retention.
∙ Bucket: 25 kg
∙ Consumption: 1,6-3,5 kg/m2 depending on the size of employed particles
Cod.
3378
3381
3384
Cod.
- 52
- 84A
- 84B
- 84C
particle size mm
1,2*
1,5*
2*
base
0100 white
0,45-0,55
0,35-0,45
0,28-0,33
Bucket kg
25
25
25
25
layers
1
1
1
€/kg
3,50
3,66
4,69
10,14
€/Bucket
87,55
91,67
117,42
253,59
* Available only on request - Minimum order for white or colored: minimum order nr. 33 buckets of 25 Kg
25
26
Surface hardness
Mineral look
Consolidating
For building restoration
Silicates · exterior finishings
Silicates
For a surface which is abrasion resistant, transpiring, solid to light, with a mineral look, with the whole
strength of the silicon dioxide.Finishings based on potassium silicate are formulated according to norm
DIN 18363 2.4.6. so to maintain their particular decorative effect due to the mineral effect.
They offer a good protection and breathability in the restoration of historical buildings and in the ecomodern construction.
Silicates
F4 SIL
GRIPSIL 4
Exterior finishings
SIL4 BIO
SIL4 INTO 1,2-1,5-2-3 mm
Suggested for Grigonova and
Palladio systems
27
Silicates · fixatives and primers
f4 sil
Potassium silicate transparent fixative. Equipped with high-penetration power and grip strength, in
conformity to DIN 18363 section 2.4.6. The product is used as insulation for the application of mineral
finishes. It can also be used as diluent of SIL4 BIO mineral paint.
∙ Consumption: 0,07-0,14 lt/m2 ∙ Theoretical yield: 7-14 m2/lt
Cod.
410415
410450
base
0000 transparent
0000 transparent
Bucket lt
15
5
€/lt
4,87
5,84
€/Bucket
73,08
29,21
gripsil 4 - SILIKATGRUNDIERUNG
Silicate mineral binding base. The product develops an effective bridge between the surface and
the mineral finish, and on walls with surfaces already treated with old organic paint. It can also be used
as primer to regularize, mask and cover hard surfaces or uneven finishes prior to the use of exterior
mineral finishes of the silicate class, in conformity to DIN 18363 section 2.4.6.
∙ Bucket: 14 lt
Cod.
411351
411381A
411381B
411381C
28
base
0100 white
Bucket lt
14
14
14
14
€/lt
5,40
5,67
7,30
9,81
€/Bucket
75,60
79,38
102,20
137,34
Silicates · exterior finishings
sil4 BIO - SILIKATFARBE
Potassium-silicate smooth mineral finish for indoor and outdoors. Formulated according to DIN
18363, Section 2.4.6., it has a high breathability to water vapor and a low water absorption. It has the
appearance and color of colored antique plasters or old lime paint. Suitable in our Grigonova and Palladio
Restauro rehabilitation and renovation systems.
∙ Bucket: 15 lt
∙ Consumption: 0,13 lt/m2
(recommend using F4 SIL, diluted 1:1 with water)
∙ Stability in the bucket: maximum 12 months from production date
Recommended finishing coat for GRIGONOVA and PALLADIO systems
Cod.
436351
436381A
436381B
436381C
base
0100 white
Bucket lt
15
15
15
15
€/lt
7,30
7,68
9,84
12,61
€/Bucket
109,55
115,26
147,71
189,27
Permeability to water vapor Sd = 0,058 m (classe C1 > 50 m)
Silicates
SIL4 INTO - SILIKATPUTZ K compatto 1,2-1,5-2-3 mm
Silicate mineral intonachino with compact effect. Fiber-reinforced finishing coat available in various
grain sizes. Equipped with excellent workability, it is suitable when you need a mineral finish with high
water vapor diffusion and good water repellence, on plasters and cycles in green building, according to
DIN 18363 point 2.4.6.
∙ Bucket: 25 kg
Recommended finishing coat for GRIGONOVA and PALLADIO systems
ETA 05/196 - ETA 07/0145
ETA 13/0001
insulation systems
Cod.
particle size mm
4384
1,2
0,45-0,55
1
4388
1,5
0,30-0,35
1
layers
4392
2
0,28-0,33
1
4396
3
0,25-0,28
1
Cod.
- 52
- 84A
- 84B
- 84C
base
0100 white
Bucket kg
25
25
25
25
€/kg
3,00
3,25
4,00
4,78
€/Bucket
75,00
81,25
100,00
119,50
Mineral silicate-base finishing coat to complement the Grigotherm System › pages 42-43
13/0001
29
Eco-Building
Decorative
Transpiring
Natural
Mineral
Lime
Lime · exterior finishings
Nature gave to lime rocks several physical and aesthetical properties, which since ancient times were
used to create ornamental effects such as paintings and glazings, spatula spread in polished and
glazed effect, murble look, travertine look and natural stones imitations.
The modern technology allows to use the matured lime putty together with inerts and natural pigments,
to obtain totally mineral finishings: these finishings are particularly suitable to restore and renovate
historical and eco buildings.
Main characteristic of these products is the extremely high water vapour permeability.
Exterior finishings
PENTACALCE
5th CALCE 0,7-1-1,2 mm
Lime
5th SPATOLA
5th MARMO
5th STILE ANTICO
31
Lime · exterior finishings
pentaCALCE
Mineral paint based on slaked lime for interiors and exteriors. It is indicated for the decoration of
buildings of architectural interest and restoration of historic centers. The product is highly permeable to water
vapor and it offers excellent resistance to aggressive molds.
∙ Bucket: 15 lt
552151
552181A
552181B
base
0100 white
traditional colors cat. B
Bucket lt
15
15
15
€/lt
2,94
3,29
3,95
€/Bucket
44,19
49,44
59,33
5th CALCE 0,7-1-1,2 mm
Mineral intonachino plaster finish based on slaked lime. It has excellent breathability and resistance
to the formation of molds and bacteria. The inorganic composition and its filling capacity make the product
indicated as an ideal finish for the restoration of historic centers and in interventions on green buildings.
∙ Bucket: 25 kg
∙ Consumption: 1,6-3,2 kg/m2
Cod.
particle size mm
5390
0,7
0,31-0,39
2
5391
1
0,50-0,60
1
5392
1,2
0,45-0,55
1
Cod.
- 52
- 84A
-84B
32
base
0100 white
traditional colors cat. B
Bucket kg
25
25
25
layers
€/kg
1,81
2,06
2,47
€/Bucket
45,32
51,50
61,80
Lime · decorative finishings
5th spatola
Glossy decorative finish based on slaked lime. It creates an antique effect and soft color shades
with a smooth and shiny appearance.
∙ Bucket: 5 kg / 20 kg
∙ Consumption: 0,5 kg/m2 ∙ Theoretical yield: 2 m2/kg
Cod.
544522
544550
544583A
544585A
544583B
544585B
base
0100 white
0100 white
Bucket kg
20
5
20
5
20
5
€/kg
3,09
3,70
3,29
3,91
4,22
4,94
€/Bucket
61,80
18,54
65,92
19,57
84,46
24,72
5th marmo
Decorative finish with a marmor effect based on slaked lime and marble dust. It is indicated
as protective finish for interior and exterior walls, to which it gives a silky look that mimics the pleasant
and compact effect of classic marble, achieving many decorative effects.
∙ Consumption: 1,5 kg/m2 ∙ Theoretical yield: 0,65 m2/kg
base
0100 white
0100 white
Bucket kg
20
5
20
5
20
5
€/kg
2,88
3,40
2,98
3,60
3,81
4,63
€/Bucket
57,68
17,00
59,74
18,03
76,22
23,18
Lime
Cod.
544722
544750
544783A
544785A
544783B
544785B
5th stile antico
Mineral decorative intonachino, powder, with travertine effect. Coating reproducing effects
and aspects of natural finishes such as travertine and stone monuments. With excellent water vapor
permeability. Powder product to be mixed with water before use.
∙ Bucket: 15 kg ∙ Water in the mix: 25-30%
∙ Consumption: 1,5 kg/m2 ∙ Theoretical yield: 0,65 m2/kg
Cod.
544922
base
0100 white
Bucket kg
15
€/kg
3,08
€/Bucket
46,35
33
34
Adheres
Prepares
Protects
Insulates
Restores
Specials
Specials · primers
Directly from the heart of Grigolin technology research, a special line of highly technical products, studied
to solve the specific requirements of foundation preparation and application of finishings, including a wide
range of highly performing primers and decorative finishes.
Primers
artestucco
SEI KO
SEI OK
sei neutral
prg sl t
prg sl p
one micro
primer uni-ko-gm
prg 101
prg 10
prg flex
Specials
Exterior finishings
REP6
Ritardante per intonachino
SESTO SENSO
VENESIX
SEI SPECCHIO
35
Specials · primers
artestucco
Plaster for interior finishing. Product suitable for shaving of interior surfaces and for filling small imperfections
and microcrazing. Available in powder and paste.
∙ Bucket: 16 kg powder / 5-25 kg paste
∙ Diluition: paste: ready to use / powder: 40% with water
∙ Consumption: 0,5-1kg/m2 ∙ Theoretical yield: 2-1 m2/kg
Cod.
668761
668752
668750
base
powder
paste
paste
Bucket kg
16
25
5
€/kg
1,44
1,94
2,76
€/Bucket
23,18
48,62
13,81
SEI KO
Detergent solution for cleaning molds- and algae-infested surfaces. It is featuring extreme efficiency and
ease of application with spray dispenser.
Eliminates dark spots and owns whitening action on molds, fungi and algae.
∙ Bucket: 0,5 lt
Cod.
612201
base
0000 transparent
Bucket lt
0,5
€/lt
18,54
€/Bucket
9,27
SEI OK
Sanitizing and reparator solution for interior and exterior walls. Solution composed of special chemical
agents with broad spectrum of action that prevent the formation of mold, fungus and algae. It is particularly
suitable for cleaning surfaces and restoring surfaces prior to treatment with anti-mold painting.
∙ Bucket: 1 lt ∙ Diluition: ready to use
Cod.
611001
base
0000 transparent
Bucket lt
1
€/lt
9,74
€/Bucket
9,74
SEI NEUTRO
Mineral neutralizer for exterior and interior wall surfaces. The product is particularly suited for
pretreatment on surfaces that present difficult smoke, nicotine, soot, combustion waste and mottling stains due
to old water infiltrations. SEI Neutral avoids the outcrop of defects on the surface subsequently treated with any
type of water-based paint.
∙ Bucket: 5 lt
Cod.
610050
36
base
0000 transparent
Bucket lt
5
€/lt
2,71
€/Bucket
13,55
Specials · primers
PRG SL T
Consolidating insulator, transparrent, solvent-based, odour-free, for exteriors. Has excellent water
repellency, consolidating power and high penetration. It ensures adhesion of the finishing and the resistance of
the entire cycle. Suitable for consolidating the support of old paintwork.
Cod.
619050
619025
base
0000 transparent
0000 transparent
Bucket lt
25
5
€/lt
7,03
8,43
€/Bucket
175,88
42,18
PRG SL P
Impregnating insulator, pigmented, solvent-based, odour-free, for exteriors. Product with excellent
covering power, adhesion and water resistance, has the power and stain resistance to mold and microorganisms.
It confers resistance to the cycles for external and evens the surfaces.
∙ Bucket: 15 lt
∙ Diluition: 13-30% with odorless diluent
Cod.
619115
base
0100 white
Bucket lt
15
€/lt
14,06
€/Bucket
210,90
one micro
Consolidating transparent primer in micro-emulsion. High product penetration, suitable as a fixative
for preparation on any wall surface. Fixed chalking and dusty sides of the support due to its high binding
power.
∙ Theoretical yield: 10 m2/lt
110215
110250
base
0000 transparent
0000 transparent
Bucket lt
15
5
€/lt
5,40
6,49
€/Bucket
81,12
32,45
Specials
PRIMER UNI-KO GM
Universal filler base for thick plasters. The product is resistant to alkali, it has a high binding and grip power.
It creates a rough surface that promotes the grip of subsequent layers of plasters of different types of finish and
intonachino, it forms a structural fill and evens the irregular absorption of the surface to be treated.
∙ Diluition: max 15-25% with water
Certificati ETA 05/196 - ETA
07/0145 - ETA 13/0001 per
sistemi d’isolamento termico a
cappotto
Cod.
673351
673381A
673381B
673381C
673350
673380A
673380B
673380C
base
0100 white
0100 white
Bucket lt
14
14
14
14
5
5
5
5
€/lt
4,94
5,20
6,69
9,06
5,66
5,92
8,03
10,89
€/Bucket
69,16
72,80
93,66
126,84
28,33
29,62
40,17
54,49
13/0001
37
Specials · primers
PRG 101 - BETONKONTAKT
Primer for the application of gypsum and lime-based plasters onto smooth concrete surfaces. It is
a special grip promoter used to improve grip of lime and gypsum plasters onto concrete surfaces. It has a high
binding power and adhesion and is presented as a semi-covering base of green color.
∙ Theoretical yield: 7,1 m2/lt
616015
616050
base
green
green
Bucket lt
15
5
€/lt
6,25
7,5
€/Bucket
93,79
37,50
PRG FLEX
Elastic latex in emulsion based on synthetic resin. Has excellent elasticity and resistance to alkali. Added
to adhesive products and to mixtures of sand and cement it improves the adhesiveness, elasticity and is suitable
to seal microcrazing. Good compatibility with cement mixtures.
∙ Bucket: 5 lt
∙ Diluition: 1:1 with water beforer mixing
Cod.
616350
base
0000 transparent
Bucket lt
5
€/lt
9,27
€/Bucket
46,35
PRG 10
Primer in emulsion based on synthetic resins. Primer with with versatility and resistance to alkali. It gives
strength and adhesion when mixed with mortar, and smoothing.
∙ Diluition: as a primer 1:10 with water
As an additive for mortars in a ratio
1:3 – 1:5 water in the mix
Cod.
616115
616150
38
base
0000 transparent
0000 transparent
Bucket lt
15
5
€/lt
7,89
8,75
€/Bucket
118,35
43,78
Specials · exterior finishings
REP 6
Odour-free, solvent-based, transparrent, siloxanic water-repellent. Product not film-forming with
excellent traspirability and water repellency for treatment of brick, stone, etc. Does not modify the aspect of
the support over time.
∙ Consumption: 0,2-1,4 lt/m2 ∙ Theoretical yield: 0,7-5 m2/lt depending on the substrate absorption
Cod.
636625
636650
base
0000 transparent
0000 transparent
Bucket lt
25
5
€/lt
10,38
12,44
€/Bucket
259,56
62,22
Ritardante per intonachino
Appropriate solution to slow the drying of the finish coatings (plasters). Can be used in all the plaster
of the series Acrylics, siloxane, Elastomeric and Silicates ONLY in summer or with ambient temperature above
25-30 ° C. Add RITARDANTE PER INTONACHINO respecting the recommended dosage, and mix thoroughly.
∙ Bucket: 10 lt
∙ Recommended dosage (depending on temperature):
from 250 to 400 ml (0,25-0,40 lt) for 25 kg buckets
Cod.
650003
base
0000 transparent
Bucket lt
10
€/lt
10,5
€/Bucket
105,00
Specials
39
Specials · decorative finishings
SESTO SENSO
Antique water-based canvas, odourless, for interiors. Decorative finish with good resistance to
washing and high transpiration. Gives surfaces a rustic and antiqued finish. Suitable for the application in
interior fittings. Before the finish, prepare the surface with one or two coats of water-based paint white or
colored.
∙ Bucket: 5 lt ∙ Diluition: ready to use
Cod.
643680A
643680B
base
Bucket lt
5
5
€/lt
14,71
17,52
€/Bucket
73,55
87,61
VENESIX
Decorative finish with a stucco veneziano effect. It is a fine and decorative finish for interior walls, unique
of its kind, as it offers multiple light and shade effects and nuances that can play the old Venetian plasters.
∙ Consumption: 1 kg/m2 ∙ Theoretical yield: 1 m2/kg
Cod.
658552
658550
658581A
658580A
658581B
658580B
base
0100 white
0100 white
Bucket kg
25
5
25
5
25
5
€/kg
5,47
6,79
5,75
7,16
7,38
9,17
€/Bucket
136,99
33,99
143,95
35,80
184,63
45,89
SEI SPECCHIO
Decorative stucco with self-shine finish. Interior decorative finish with high gloss and color effect. Easy
to apply and suitable for use on any surface properly prepared. A fundamental characteristic is the ease of
polishing also on large surfaces.
∙ Bucket: 25 kg
∙ Consumption: 1 kg/m2 ∙ Theoretical yield: 1 m2/kg
Cod.
668552
668584A
668584B
40
base
0100 white
Bucket kg
25
25
25
€/kg
4,00
4,21
5,41
€/Bucket
100,17
105,32
135,45
Smalti e vernici · vernici trattamento legno
41
application cycles
Coating Grigotherm system ETA 05/0196 certified
The scheme lists all ETA certified products;
see the entries of the technical specifications to ensure compatibility with other Grigolin products.
AC 07 Isolflex
Powder flexible adhesive for thermal
coating systems
Pannello GRIGOEPS
class 80/100/120
GRIGOFIX
Anchors for the attachment of insulation panels
RETE PER CAPPOTTO
Alkali-resistent fiberglass mesh for coating systems
AC 07 Isolflex
oppure
AC 08 Isolflex
Powder flexible adhesive for thermal coating
systems
Primer UNI-KO GM
Universal filler base for thick plasters
ONE COAT
Anti-algae acrylic intonachino
or
XIL2 INTO
Anti-algae, acryl-siloxane intonachino
or
SIL4 INTO
Silicate mineral intonachino
42
application cycles
Coating Grigotherm system ETA 13/0001 certified
13/0001
AC 20 Unilight
Light color, powder adhesive skim
plaster with low thermal conductivity
Pannello GRIGOEPS
class 80/100/120
GRIGOFIX
RETE PER CAPPOTTO
AC 20 Unilight
Light color, powder adhesive skim plaster
with low thermal conductivity
Primer UNI-KO GM
ONE COAT
Anti-algae acrylic intonachino
or
XIL2 INTO
Anti-algae, acryl-siloxane intonachino
or
SIL4 INTO
43
application cycles
Coating system with GRIGOWOOL panels, ETA 07/0145 certified
07/0145
AC 07 Isolflex
Powder flexible adhesive for thermal
coating systems
Pannello GRIGOWOOL
or
GRIGOWOOL 035
mineral wool panel
GRIGOFIX
RETE PER CAPPOTTO
AC 07 Isolflex
or
AC 08 Isolflex
Powder flexible adhesive for thermal coating
systems
Primer UNI-KO GM
SIL4 INTO
44
application cycles
Eco-Building
CONSTRUCTION
OPPURE
BM 30
Bio-mortar for masonry with exposed
concrete, M2,5 class
PLASTERING
OPPURE
BM 55
BMK 30
Bio-mortar for masonry, M5
class
Water-proof, bio-mortar for masonry
with exposed concrete, M2,5 class
OPPURE
OPPURE
Bl 21
Bl 19
Traditional bio base render,
based on natural hydraulic lime
NHL 3,5
Traditional bio base render,
based on slaked lime
BlK 21
Water-proof traditional bio
base render, based on natural
hydraulic lime NHL 3,5
OPPURE
OPPURE
OPPURE
Bl 07
BlK 07
AB 09 RASOCAL
FINISHES AND
SKIM PLASTERS
MARMORINO
GR 100/200/300
Precious mineral wall decoration,
extra-white
Dry bio finish, based on natural
Water-proof dry bio finish, based on
natural hydraulic lime NHL 3,5
Multi-purpose bio-skim plaster,
powder, based on natural
PENTACALCE
F4 SIL
Potassium silicate transparent
insulator
Mineral paint based on slaked lime for
interiors and exteriors.
SIL4 BIO
Potassium-silicate mineral paint for interiors
OPPURE
COLORED
FINISHES
+
OPPURE
5th CALCE 0,7 - 1,2mm
Mineral intonachino plaster finish based on slaked lime
45
application cycles
Restoration of moist masonry
OPPURE
+
ISI
rinzaffo
Grigonova
Rinzaffo
Curing roughcast
based on sulphateresistant binders
Curing roughcast based on
sulphate-resistant binders
Grigonova
POROSO
Fiber-reinforced plaster with
antisaline effect, based on
OPPURE
Stabilsale
High-penetration, pigmented
anti-saline solution, based on
siloxanic oligomers
ISI
intonaco
Unisan
One coat dehumidifying
plaster, based on hydraulic
binders
One coat dehumidifying fiberreinforced plaster, based on
Grigonova
RISANA
Fiber-reinforced, breathable,
water-repellent plaster, based on
OPPURE
CALCESAN
aG 10
RASOTHERM
Monolayer acting dehumidifying
product to be used as render,
restoration render and transpiring
finish based on natural hydraulic
lime NHL 3,5
COLORED
FINISHES
OPPURE
Multi-purpose skim plaster, powder
F4 SIL
insulator
SIL4 BIO
Potassium-silicate
smooth mineral finish for
exteriors
46
AB 09 RASOCAL
PRIMER 2W
Water-based transparent siloxane
base
XILAN DUEL
Anti-algae, smooth siloxane
finish, for exteriors
F2 COPRENTE
Pigmented acryl-siloxane base
XIL2 INTO
Anti-algae, acryl-siloxane
intonachino for exteriors
GRIPSIL 4
Silicate mineral binding base
SIL4 INTO
for exteriors
application cycles
Restoration of moist masonry
OPPURE
palladio
rinzaffo
Sulphate-resistant
repair rough cast based
on slaked lime and
pozzolanic binders
palladio
POROSO
Sulphate-resistant,
macroporous plaster,
based on slaked lime
and pozzolanic agents
CALCESAN
Monolayer acting dehumidifying
product to be used as render,
restoration render and transpiring
finish based on natural hydraulic
lime NHL 3,5
palladio
RISANA
Sulphate-resistant,
waterproof, breathable
plaster, based on slaked
lime and pozzolanic
binders
AB 09 Rasocal
GRIPSIL 4
Silicate mineral binding base
F4 SIL
insulator
SIL4
BIO
Potassium-silicate
smooth mineral finish for
exteriors
F2 COPRENTE
Pigmented acryl-siloxane base
PRIMER 2W
Water-based transparent
siloxane base
SIL4 INTO
Silicate mineral intonachino for exteriors
MARMORINO
GR 100/200/300
Precious mineral wall decoration,
extra-white
FINITURA
COLORATA
XIL2 INTO
Anti-algae, acryl-siloxane intonachino for exteriors
XIL2 FILL
Anti-algae, acryl-siloxane filling finish for exteriors
47
Artemuri tintometric system
The Artemuritintometric system is an innovative system that with 15 water based
colouring pastes offers the possibility to realize a wide chromatic range for decoration
and protection of both interiors and exteriors. These highly compatible 15 pastes
allow to colour all products of the Artemuri line: acrylics, siloxanes, elastomerics,
silicates, lime and decorative effects.
Among these 15 colouring pastes, all glycol and solvents free, 9 are suitable for the
exteriors: these are technologically advanced pigments, perfectly resistant, solid
and stable to light and to weather conditions. The Artemuri system requires for most
of our products the use of only 2 tintometric bases: according to the chosen colour
and product, all colours will be obtained using a white base (for the light colours)
and a neutral base (for the strong ones).This will allow you to keep a limited stock
with a better internal organization, and a following savings in economy and space.
The tintometric system, joint with the formulas managing computer system, is
enabling to reproduce all colours of the Artemuri palette, of the NCS catalogue and
RAL table.
This formulary, continuously updated, contains colours selection from the market.
Tintometric assistance - Artemuri offers the possibility to rely on a colourmetric assistance: calling the green number 800 500 555 it is possible to ask the
development of samples colours, personalized colours and those from the most
common national palettes.
Practicaladvices and warnings
•Always check the colours developed: it is absolutely
necessary that the Artemuritintometric system user
verifies adequately the produced colours
before application, obviously after drying
and to the indirect solar light.
•We suggest to create and archive of
all colours obtained with the tintometric
machine: for this purpose we supply,
together with the equipment, white
cardboards on which to apply your colour
tests, so to use them both as colour test
and as following check for eventual site
application.
•During the colour production, even if the
tintometric bases and the colouring pastes are
properly tested and inspected, we suggest to
use products from the same production batch
(as per Bucket label), to avoid even minor tone
differences
•To guarantee a correct use of the tintometric
system we recommend to not overlook
the requested regular maintenance of the
supplied equipment (colour machine +
mixer )
48
Tintometric basis acrylics
primo preparation primer
Cod.
1105
1105
base
0100 white
0300 neutral
Bucket lt
14
13
€/lt€/Bucket
4,73
66,22
3,63
47,19
Bucket lt
14
5
€/lt€/Bucket
4,15
58,10
4,94
24,72
UNo traspira interior finishing
Cod.
1230
1230
base
0100 white
0100 white
UNo antimuffa interior finishing
Cod.
1235
1235
base
0100 white
0100 white
Bucket lt
14
5
€/lt€/Bucket
4,87
68,20
6,17
30,85
Bucket lt
14
5
€/lt€/Bucket
4,35
60,90
5,20
26,01
Bucket lt
15
5
14,5
4,85
13,5
4,5
€/lt€/Bucket
5,82
87,30
6,90
34,51
5,39
78,26
6,36
30,87
4,19
56,60
5,02
22,62
Bucket lt
14
5
€/lt€/Bucket
8,21
115,00
8,40
42,00
UNo TEX interior finishing
Cod.
1260
1260
base
0100 white
0100 white
UNo lavabile interior finishing
Cod.
1240
1240
1240
1240
1240
1240
base
0100 white
0100 white
0200 medium
0200 medium
0300 neutral 2
0300 neutral 2
POWER LUX interior finishing
Cod.
1240
1240
base
0100 white
0100 white
muri one interior finishing
Cod.
1250
1250
1250
1250
base
0300 neutral “glossy”
0300 neutral “glossy”
Bucket lt
15
5
13
4,33
€/lt€/Bucket
9,75
146,25
11,68
58,41
6,48
84,36
7,80
33,81
Cod.
1255
1255
1255
1255
base
0300 neutral “satin”
0300 neutral “satin”
Bucket lt
15
5
13
4,33
€/lt€/Bucket
9,75
146,25
11,68
58,41
6,48
84,36
7,80
33,81
UNI-VAL exterior finishing
Cod.
1360
1360
base
0100 white
0300 neutral
Bucket lt
15
13,5
€/lt€/Bucket
8,29
124,38
5,81
78,54
49
beton-one exterior finishing
Cod.
1375
1375
base
0100 white
0300 neutral
Bucket lt
15
13
€/lt€/Bucket
7,57
113,56
5,30
68,96
quarz-one exterior finishing
Cod.
1365
1365
1365
1365
1365
1365
base
Bucket lt
0100 white
15
0100 white
5
0100 white color sample0,75
0300 neutral
13,5
0300 neutral
4,5
0300 neutral color sample0,675
€/lt€/Bucket
4,94
74,16
5,93
29,67
8,91 6,70
3,65
49,37
4,38
19,75
6,58 4,44
UNo fill exterior finishing
Cod.
1360
1360
base
0100 white
0300 neutral 2
Bucket lt
15
13,5
€/lt€/Bucket
7,03
105,53
4,59
62,02
Bucket lt
15
14
€/lt€/Bucket
5,40
81,12
4,33
60,71
uni-ka exterior finishing
Cod.
1370
1370
base
0100 white
0300 neutral
ONE COAT cOmpatto 1,2 - 1,5 mm exterior finishing
Cod.
1390
base
0300 neutral
Bucket kg
24
€/kg€/Bucket
2,06
49,44
one coat 0,7-1-1,2-1,5-2-3 mm exterior finishing
Cod.
1385
1387
1389
1391
1393
1395
base
Bucket kg
€/kg€/Bucket
2,06
49,44
0300 neutral
24
0300 neutral color sample* 2,43,30
7,92
Tintometric basis siloxanes
f2 coprente preparation primer
Cod.
2110
2110
base
0100 white
0300 neutral
Bucket lt
14
13
€/lt€/Bucket
5,73
80,22
4,70
61,10
Bucket lt
15
13,5
€/lt€/Bucket
10,81
162,23
7,58
102,35
Bucket lt
15
13,5
€/lt€/Bucket
8,11
121,75
5,66
76,48
Bucket lt
15
14
€/lt€/Bucket
7,03
105,53
5,62
78,74
xilan duel exterior finishing
Cod.
2361
2361
base
0100 white
0300 neutral 2
xil2 fill exterior finishing
Cod.
2366
2366
base
0100 white
0300 neutral 2
bis exterior finishing
Cod.
2371
2371
50
base
0100 white
0300 neutral
xil2 into 0,7-1-1,2-1,5-2-3 mm exterior finishing
Cod.
2376
2378
2380
2382
2384
2386
base
0300 neutral
Bucket kg
24
€/ kg€/Bucket
3,14
75,40
due si compatto 1-1,2-1,5-2-3 mm exterior finishing
Cod.
2388
2390
2392
2394
2396
2398
base
0300 neutral
Bucket kg
24
€/ kg€/Bucket
2,65
63,60
DOPPIA VELA decorative finishing
Cod.
2455
2455
base
0300 neutral
0300 neutral
Bucket lt
€/lt€/Bucket
4,9010,4052,02
0,95
12,57
12,57
Tintometric basis elastomerics
fondo 03 preparation primer
Cod.
3103
base
0100 white
Bucket lt
14
€/lt€/Bucket
7,82
109,48
elaster fill exterior finishing
Cod.
3362
3362
base
0100 white
0300 neutral
Bucket lt
€/lt€/Bucket
159,73
146,01
13,5
6,81
92,06
Tintometric basis silicates
gripsil 4 preparation primer
Cod.
4113
4113
base
0100 white
0300 neutral
Bucket lt
14
13
€/lt€/Bucket
5,40
75,60
4,59
59,67
sil4 BIO exterior finishing
Cod.
4363
4363
base
0100 white
0300 neutral
Bucket lt
€/lt€/Bucket
157,30
109,55
13,5
5,15
69,53
sil4 into K compatto 1,2-1,5-2-3 mm exterior finishing
Cod.
4376
4380
4384
4388
4392
4396
base
0300 neutral
Bucket kg
24
€/kg€/Bucket
2,55
61,20
51
Tintometric basis lime
pEntaCALCE exterior finishing
Cod.
5521
base
0100 white
Bucket lt
15
€/lt€/Bucket
2,94
44,19
Bucket kg
€/kg€/Bucket
5th CALCE 0,7-1-1,2 mm exterior finishing
Cod.
5390
5391
5392
base
0100 white
251,81
45,32
5th spatola decorative finishing
Cod.
5445
5445
base
0100 white
0100 white
Bucket kg
20
5
€/kg€/Bucket
3,09
61,80
3,70
18,54
Bucket kg
20
5
€/kg€/Bucket
2,88
57,68
3,40
17,00
Bucket lt
14
5
13
4,67
€/lt€/Bucket
4,94
69,16
5,66
28,33
3,86
50,18
4,96
23,18
Bucket lt
5
€/lt€/Bucket
14,00
70,04
Bucket kg
25
5
24
4,8
€/kg€/Bucket
5,47
136,99
6,79
33,99
4,72
113,47
5,89
28,29
Bucket kg
25
24
€/kg€/Bucket
4,00
100,17
3,65
87,76
5th marmo decorative finishing
Cod.
5447
5447
base
0100 white
0100 white
Tintometric basis specials
PRIMER UNI-KO GM preparation primer
Cod.
6733
6733
6733
6733
base
0100 white
0100 white
0300 neutral
0300 neutral
sesto senso decorative finishing
Cod.
6436
base
0300 neutral
venesix decorative finishing
Cod.
6585
6585
6585
6585
base
0100 white
0100 white
0300 neutral
0300 neutral
sei specchio decorative finishing
Cod.
6685
6685
52
base
0100 white
0300 neutral
Coloring pastes for exterior finishings
bca white paste
Cod.
9910
Bucket in lt
2,5
€/lt€/Bucket
17,65
44,14
GOX oxide yellow paste
Cod.
9933
Bucket in lt
2,5
€/lt€/Bucket
17,65
44,14
GBV bismuth Vanadium yellow paste
Cod.
9922
Bucket in lt
2,5
€/lt€/Bucket
132,87
332,18
VOS oxide green paste
Cod.
9987
Bucket in lt
2,5
€/lt€/Bucket
40,16
100,41
COB cobalt blue paste
Cod.
9975
Bucket in lt
2,5
€/lt€/Bucket
132,87
332,18
ROX poxide red paste
Cod.
9962
Bucket in lt
2,5
€/lt€/Bucket
17,65
44,14
REX exterior red paste
Cod.
9955
Bucket in lt
2,5
€/lt€/Bucket
79,14
197,85
NOX oxide black paste
Cod.
9990
Bucket in lt
2,5
€/lt€/Bucket
17,65
44,14
AOX oxide orange paste
Cod.
9944
Bucket in lt
2,5
€/lt€/Bucket
79,14
197,85
Coloring pastes for interior finishings
GOR organic yellow paste
Cod.
9927
Bucket in lt
2,5
€/lt€/Bucket
79,14
197,85
VOG ftalo green paste
Cod.
9980
Bucket in lt
2,5
€/lt€/Bucket
40,16
100,41
BLU ftalo blue paste
Cod.
9970
Bucket in lt
2,5
€/lt€/Bucket
40,16
100,41
ROG organic red paste
Cod.
9950
Bucket in lt
2,5
€/lt€/Bucket
79,14
197,85
MAG magenta paste
Cod.
9953
Bucket in lt
2,5
€/lt€/Bucket
79,14
197,85
VIO violet paste
Cod.
9979
Bucket in lt
2,5
€/lt€/Bucket
79,14
197,85
53
Rasanti
Attrezzature
e accessori
∙ the prices for equipment and accessories are already net discounted
cod. 070000
TINTOMETRIC COLOUR MACHINE
cod. 070001
Mixer
euro 5.000,00*
cod. 070002
computer KIT
euro 1.500,00*
cod. 070004
TECHNICAL SCALE
euro 495,00*
cod. 070006
DYMO LABEL WRITER 400
euro 135,00*
cod. 070003
Colour Scan 2.0
euro 600,00*
cod. 070007
NCS PALETTE
euro 90,00*
cod. 070010
arteMURI COATINGS PALETTE
euro 14,00*
cod. 070011
artemuri PALETTE
54
euro 14.500,00*
euro 13,50
* available on request
Grigolin: soluzioni
per la casa a tutto tondo
Da 50 anni un punto di riferimento importante per il settore dell’edilizia
55
Synoptic table
Fixatives and
primers
1
2
3
4
5
6
UNO FIX
PRIMO
1-5-15 l
14 l
PRIMER 2W
F2 COPRENTE
5-15 l
14 l
Interior
finishings
UNO LIGHT
UNO ECO
UNO IN
UNICO
UNO SMART
UNO TRASPIRA
UNO ANTIMUFFA
UNO TEX
UNO LAVABILE
ESATHERM
POWER LUX
MURI ONE
14 l
14 l
14 l
5-14 l
14 l
5-14 l
5-14 l
5-14 l
5-15 l
5l
5-14 l
5-15 l
Exterior
finishings
UNI VAL
UNO FILL
QUARZ-ONE
UNI-KA
BETON-ONE
ONE COAT
COMPATTO
ONE COAT
15 l
15 l
5-15 l
15 l
15 l
1,2÷1,5
25 Kg
0,7÷3,0
25 Kg
XILAN DUEL
XIL2 FILL
BIS
XIL2 INTO
15 l
15 l
15 l
0,7÷3,0
25 Kg
1,0÷3,0
25 Kg
Decorative
finishings
Acrylics
DUE SI
COMPATTO
DOPPIA VELA
1-5 l
Silosannici
FONDO 03
14 l
ELASTER FILL
ELASTER
15 l
1,2÷2,0
25 Kg
F4 SIL
GRIPSIL
5-15 l
14 l
SIL4 BIO
SIL4 INTO
COMPATTO
15 l
1,2÷3,0
25 Kg
PENTALCALCE
5th CALCE
15 l
0,7÷1,2
25 Kg
5th SPATOLA
5th MARMO
5th STILE
ANTICO
5-20 kg
5-20 kg
15 kg
REP6
RITARDANTE
PER
INTONACHINO
5-25 l
10 l
SESTO SENSO
VENESIX
SEI SPECCHIO
5l
5-25 Kg
25 Kg
Elastomerics
Silicates
Lime
Specials
ARTESTUCCO
5-25 kg /
16 kg
ONE MICRO
5-15 l
PRG 101
5-15 l
PRIMER UNI-KO 5-14 l
GM
PRG FLEX
5l
PRG 10
5-15 l
PRG SL T
5-25 l
PRG SL P
15 l
SEI NEUTRO
5l
SEI OK
1l
LST0004 - 01/2016
FORNACI CALCE GRIGOLIN SPA
SEDE AMMINISTRATIVA
Via Foscarini, 2 - 31040 Nervesa della Battaglia TV
Tel. +39 0422 5261 - Fax +39 0422 526299
info@fornacigrigolin.it
www.fornacigrigolin.it
STABILIMENTI DI PRODUZIONE
I-31010 Ponte della Priula TV - Via Bombardieri, 14
Tel. +39 0438 4465 - Fax +39 0438 446497/50
DEPOSITI
I-32037 Sospirolo BL - Via Masiere
Tel. +39 0437 87797 - Fax +39 0437 87797
I-35010 Borgoricco PD - Via dell’Industria 7/A
Tel. +39 049 9335769 - Fax +39 049 9338315
I-35010 Limena PD - Via Pierobon, 26
Tel. +39 049 8842494 - Fax +39 049 8846805
I-33078 San Vito al Tagliamento PN - Via Armenia, 1
Tel. +39 0434 587035 - Fax +39 0434 857916
I-25030 Villa Erbusco BS - Via per Iseo, 42
Tel. +39 030 7703795 - Fax +39 030 7249949
I-25080 Nuvolera BS - Via Dei Marmi
Tel. +39 030 690111 - Fax +39 030 69011217
I-44040 Chiesuol del Fosso FE - Via Sammartina, 52
Tel. +39 0532 978424 - Fax +39 0532 978424
I-24060 Zandobbio BG - Via S. Bernardo, 1
Tel. +39 035 4274011 - Fax +39 035 4274022
I-15062 Bosco Marengo AL - Via Vecchia Reale Z.I.
Tel. +39 0131 298471 - Fax +39 0131 298464
I-27050 Codevilla PV - Via Strada Voghera - Genestrello
Tel. +39 0383 73596 - Fax +39 0383 73596
I-43014 Medesano PR Via Solferino - Località Ramiola
Tel. +39 0525 415110 - Fax +39 0525 404374
I-00034 Colleferro Roma - Loc. Piombinara Z.I. Sloi
Tel. +39 06 97201014 - Fax +39 06 97201048
D-76275 Ettlingen/Karlsruhe Siemensstrasse, 26
Tel. +49 7243 71560 - Fax +49 7243 715690
FILIALI
arteMURI GmbH
D-76185 Karlsruhe - Fritz-Haber-straße, 6
Tel. +49 721 5709440 - Fax +49 721 5709444
D-68169 Mannheim - Zielstr. 12°
D-69254 Malsch (bei Heidelberg) Am Bahnhof 8
D-77656 Offenburg - Heinrich-Hertz-Str. 18
D-88045 Friedrichshafen - Anton-Sommer-Str. 6
Grigolin SA
CH-6805 Mezzovico - Via Cantonale Centro QI
Tel. +41 91 9228706 - Fax +41 91 9228708
Da 50 anni un punto di riferimento importante per il settore
dell’edilizia
57

price list 2016 - Fornaci Calce Grigolin SpA

Transcription

Similar documents

Mud Hopper™ Big Bucket

TUFF BUCKET LLC TB-1620 200 Lb. Bucket

The only certainty at the Intermat Trade Fair: MB Shall be the talk of

2 MB - Boskalis

Local and Long Distance Phone Service

Line the bucket with your Bubble Bags, starting

view printable hirail catenary bucket truck brochure

Habit 4 – Think Win-Win - Elm Grove Elementary PTA

buckets - Paladin Attachments

Primary 5Newsletter February 2015 Directress: Monica Pearson