PCWiz Computer - [Mac OSx86] 10.4.8 VMware Installation

Transcription

PCWiz Computer - [Mac OSx86] 10.4.8 VMware Installation Guide
1 of 6
http://pcwizcomputer.com/index.php?option=com_content&task=vie...
[Mac OSx86] 10.4.8 VMware Installation Guide
Written by Administrator
Monday, 11 February 2008
Description:
Try out Mac OS X 10.4.8 for yourself without buying a real mac. Let this guide help you along the way with simple, easy to understand step-by-step instructions and screenshots. Note: This is dif
emulates a PowerPC processor, while VMware emulates a direct x86 platform.
*********
Copyright Information
Lately, several websites have copied and posted up the text on these pages. This is strictly forbidden and violators will be reported. You may only copy from this page on the condition that you w
text on the internet and that you have notified us that you are reproducing the texts. Thanks for abiding this rule
Ever wanted to try out the famous Mac OS X operating system for yourself without getting a mac? Now you can, by using the x86 emulation software VMware Workstation (or Server), and to ma
Windows! Read on for more information:
Ever since Apple made the move to Intel processors, hackers have been trying hard to modify the x86 version of OS X to run on a PC. And, of course, they have indeed succeeded in doing it. Va
hacked ISO torrents that can be installed on PCs. However, this violates the Apple EULA agreement and there are legal issues with using the ISOs. The legal ways to obtain a copy would be:
1) Become an Apple Developer ($500 membership)
2) Buy a real mac, deactivate the copy of OS X and install it on a PC (this way would be pointless because the whole point is to run OS X without getting a mac). This way also somewhat violates
agreement says that you can't run OS X on non-Apple hardware.
Its best to get a legal copy of the ISO because then you can install the software without worry about malicious software or about the software phoning home.
With that said, lets begin.
System Requirements:
Processor supporting SSE2 or SSE3 instructions (Use CPU-Z for Windows to check)
Windows 2000 or higher/Linux (Mandrake, SUSE, or Red Hat)
512MB of RAM (strongly recommended)
6GB minimum hard drive space
8MB of VRAM
DVD-RW drive if you are burning the ISO
Software Requirements:
VMware Server (Free) or VMware Workstation 5 (commercial, recommended) or higher. VMware 6 is recommended.
Note: VMware ACE Editions apparently have problems with networking in Mac OS X.
Attention Vista users: VMware Workstation 5.5 will not work. You need Workstation 6
VMware Workstations 6.0.1 and 6.0.2 are NOT recommended. It is recommended you use Workstation 6.0 build 45731
Mac OS x86 ISO; For test purposes ONLY, in this guide the "JaS Mac OS X 10.4.8 Intel/AMD SSE2 SSE3 PPF1+PPF2" ISO will be used. Mac specific DVDs cannot be used.
Burning software to burn the ISO to DVD (optional, recommended)
Blank 4.7GB DVD+R/DVD-R/DVD-RW/DVD+RW disc (if you are burning)
Daemon Tools or Virtual Clone Drive (if you are not burning the ISO)
Step 1: Install software
Install all the software that is required. VMware is mandatory. If you are going to burn the ISO file to a DVD (recommended), you will need burning software such as NTI CD/DVD Maker or Nero
going to burn the disc, then you will need drive emulation software such as Daemon Tools or Virtual Clone Drive.
Step 2a: Burn the ISO (if you are burning)
Use your favourite burning software to burn the ISO image to DVD. Insert the bruned DVD into your optical drive.
Step 2b: Mount the image (if you are not burning)
Mount the OS x86 DVD ISO file in Daemon Tools or Virtual Clone Drive (You can use Alcohol 120% if you want). You cannot mount the ISO directly in VMware because VMware cannot properly r
format the Mac OS ISO is in)
Step 3: Configure VMware
Note: In this guide, VMware Workstation 6 will be used. VMware Server or Workstation 5 can be used, but Workstation 6 is strongly recommended.
Launch VMware
On the home page, click "Create new virtual machine" to bring up the dialog below:
Click "Next"
6/15/2008 1:47 AM
2 of 6
Make sure "Typical" is chosen and click Next
Important Note: If you are installing directly to a physical drive or partition (ignore this tip if you don't know what this is, its an advanced option) choose the Custom option and when you g
hard drives, set VMware to access a physical partition or disk
Choose Other as the Guest OS and choose Other for the version. Click Next
Note: There are several Guest OSes that you can choose for Mac OS X. The best are:
-
Other , Other
Linux , Other Linux
Other , FreeBSD
Windows NT (works well if you are getting ACPI errors but make sure your virtual hard drive images are IDE, not SCSI)
Give the machine a name. Click Next
Speed-up tip: Store the virtual machine in a partition or hard disk that is separate from the current partition/hard disk that you are currently using. This will make the virtual machine somew
Click "Use network address translation (NAT)" if you are using a official legal copy of OS x86 or "Use host-only networking" if you are using a hacked ISO image (for test purposes, of course
registering itself during installation
6/15/2008 1:47 AM
3 of 6
Choose a disk size (6GB is minimum). If you choose 6GB, you will have 1.5GB of space left after installation for your own programs. Any size is OK as long as you have the hard drive space. Chec
now" checkbox (not necessary, but it improves speed). Choose "Split disk into 2GB files" if you are putting the virtual machine on a FAT32 partition. Click Finish and wait till the virtual disk is crea
(click to enlarge)
Click VM >> Settings
(click to enlarge)
Click on "Floppy" and click Remove (You don't need floppies for OS X)
Click on "Memory" and on the right, adjust the memory amount to about half your actual system memory.
6/15/2008 1:47 AM
4 of 6
(click to enlarge)
Click "CD-ROM (IDE 1..." and on the right, select your virtual image drive/physical drive from the drop-down menu. Click OK to return back to Home. Close VMware Workstation or Server.
If you wish, you can click "Add" to add a USB Controller (not tested)
Step 4: Edit VMware config file
Navigate to the folder where you placed your virtual machine
Open the "VMware Configuration File" with Notepad
Add the line: paevm="true" to the end of the file
Note: For networking in 10.4.8, add the line ethernet0.virtualDev="e1000" to the file
Note: Sometimes, the line scsi0.present="TRUE" won't work. Change it to scsi0.present="FALSE". However, on the test machine, this was not required.
Speed-up tip: set the guestOS line to "guestOS = "darwin"
Save the file. The end result should look somewhat like this:
(click to enlarge)
Note: If you make any changes to the virtual machine in the VMware interface after editing the file, all changes will be lost
Step 5: Configure VM BIOS
This is not exactly necessary, but it will make the VM a lot faster
Go back into VMware and click the green triangle to start your machine
Quickly click inside the VM window (this lets you control the VM)
Quickly tap F2 to enter the BIOS
(click to enlarge)
Use the keyboard and Disable "Legacy Diskette A:"
Go into the Advanced tab >> I/O Device Configuration
6/15/2008 1:47 AM
5 of 6
(click to enlarge)
Disable all Serial ports, Parallel ports, and Floppy Disk controllers
Press F10 to save and exit. The machine will reboot.
Step 6: Partition/Format the hard drive
If you have mounted the ISO/inserted the DVD, the machine should boot to the DVD. It prompts you to press any key to continue Mac OS X installation. Click inside the screen and press a ke
Note: If you are using a JaS 10.4.8 image without PPF1, the image will not boot in VMware.
After a long log/script of commands, the friendly installer screen will come up telling you to choose a language. Choose a language and click the Arrow to Continue
The DVD will prepare the installer and the main screen will come up
In the Utilities menu, choose Disk Utility
In Disk Utility, choose your VMware hard drive from the left. In the main area, click the Partition tab
Set the "Volume Scheme" to one partition
Give the partition a name
Make sure the format is set to "Mac OS Extended (Journaled)"
Make sure all the hard drive space is used
Click Partition, Partition
(click to enlarge)
Once the process is done, click the red X button to close Disk Utility and relaunch the installer
Note: If you are using a JaS 10.4.8 image that is not patched with PPF2, the new partition will not be usable. Get a new image OR use a previous version image (10.4.7, etc.) to partition.
At the main installer screen, click 'Continue'
Choose your newly formatted virtual HD and click Continue again
(click to enlarge)
This part is a bit tricky:
The Printer Drivers and the Hardware support are useless. You can install the Language Translations and Additional Fonts if you use a language other than English. You can install X11 if you w
packages). Finally, choose the patch that is right for your CPU (AMD or Intel). Choose everything you need and click Install
Wait for the installation to complete
At the end, the virtual machine will restart
Note: If you get a Kernel stack error in VMware after installation, ignore it and click OK
After the machine restarts, if all goes well, Mac OS X should boot!
Here's a screenshot to prove it:
6/15/2008 1:47 AM
6 of 6
(click to enlarge)
Speed-up tip - After installation, go to System\Library\Extensions and delete AppleTPMACPI.kext if it exists\
Speed-up tip - Disable Dock Magnification
END OF INSTRUCTIONS
Press Ctrl + Alt to toggle between host and guest OS
VMware Tools is currently not available for OS X so you cannot run the VM at high resolutions. Some hackers are working on a way to use the Linux VMware Tools image to install it on OS X
The processor speed is equivalent to that of a low end G3
The VM is usable, and more responsive than PearPC
If you are looking for the speed-up tips and all those other tweaks that were here before, The links to them (now seperate pages) are below:
6/15/2008 1:47 AM

PCWiz Computer - [Mac OSx86] 10.4.8 VMware Installation

Transcription

Similar documents

How to Install and Use SSS\Progman with Carsoft or INPA interface

LA FAVORITA

How to Do Everything Mac 2/e

Installing ANSYS 15 Mount the iso files using Virtual Clone

1: Boot from DVD. 2: Click on Setting Icon→ Disk tools→Disk Utility 3

Progman with Carsoft or INPA interface First of all you must

It`s Always Sunny in Orlando

Read More - FusionStorm

Getting Started with VMware Fusion VMware Fusion for Mac OS X 2008–2012