2016 KABAR Catalog_PDF_1123.indd - Com2You

Transcription

2016 KABAR Catalog_PDF_1123.indd - Com2You
You can buy any knife or you can own a real KA-BAR®.
The KA-BAR® is a field-use knife that we have been making since WWII.
These specifications are for our CURRENT production and reflect the evolution
and improvement of the knife design & materials over the years.
“The KA-BAR” is differential heat treated, with the tang being slightly softer than the blade.
We have used this heat-treat process since WWII to assure that even under the punishing
field conditions of battle, your KA-BAR will most likely bend and not break, thus allowing
continued use and not rendering the tool functionless.
While “The KA-BAR” is marked “USMC” on the pile side (or reverse side) of the blade,
for several years now we have also offered Olean-made leather handled KA-BAR knives
marked with “U.S.ARMY” and “USN”.
Downward
Bent Guard
Blade Length: 7”
Overall Length: 11.875”
Approximate Weight: 0.7 lb
(weight is knife only)
Grind Extends
to Blood Groove
High Carbon
Cro-Van Steel
(Easy Sharpening)
Our distinctive packaging features
the “KA-BAR/OLEAN, NY” marked
high carbon black blade and is always
labeled with the proper country of
manufacture for both the knife & sheath.
KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
USMC Blade Mark
on Pile Side
Smooth Black
Epoxy “Baked”
Powder Coating
Distinct Oval
Shaped Handle
Stacked Leather Washers
and Traction Grooves in Handle
Pinned
Butt Cap
Visible Rat Tail Tang
in Butt Cap
KA-BAR/OLEAN, NY
Blade Mark
For even more information, please visit our
YouTube and Vimeo channels where you
can find several videos authenticating
KA-BAR products against similar products.
Commemorative Fighting/Utility Knives........................................2
Leather Handled Fighting/Utility Knives........................................4
We wouldn’t tell you to buy a KA-BAR® knife because of
its military heritage or because it’s a legend in the world
of knives.
We wouldn’t tell you to buy a KA-BAR® because it comes
from an American company with more than a century of
knife-making experience.
And we wouldn’t tell you to buy a KA-BAR® knife because
of its resistance to corrosion, tested strength, unmatched
edge-holding ability and out-of-the-box razor sharp blade.
Because there’s only one real reason to buy a KA-BAR®.
When it comes down to it and you’re all alone and your
survival depends on a knife, you’re going to want a knife
you can trust. A knife that won’t fail you. A knife that has
proven itself time and time again.
You can buy any knife or you can own a KA-BAR®.
Kraton G® Handled Fighting/Utility Knives.....................................7
Heavy Cutting Tools..............................................................................12
Leather Handled Hunters.....................................................................13
MULE Folders.........................................................................................14
G10 MULE Folders..................................................................................15
Warthog Folders....................................................................................16
Stainless Steel All-Purpose Knives...................................................17
Dog’s Head Knives.................................................................................18
Original Zombie® Knives....................................................................20
Becker Knife & Tool Designs..............................................................22
TDI Law Enforcement / Hinderer Knives.....................................26
Snody Knife Designs...........................................................................28
Dozier Knife Designs...........................................................................29
Johnson Adventure® Blades...............................................................30
Accessories................................................................................31
Product Specifications .......................................................................32
Product Overview & Size Comparison Chart ............................36
Warranty Information...........................................................................39
Knife Care, Storage & Sharpening....................................................39
NEW
We are proud of our heritage and continue our legacy
with the KBD Master Series. The KBD Master Series is a
collection of KA-BAR® manufactured knives designed
and authenticated by the leading outdoorsmen, survivalists,
uniformed professionals and military experts in the U.S.
To see the KBD Master Series and our full product line
visit us at KA-BAR.com.
This symbol designates the latest products released over
the past twelve months. Visit KA-BAR.com all year long as
we continue to release new products on a regular basis.
When you see this icon, know that these KA-BARs are being
made by family, friends and neighbors right here in the USA.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com
KA-BAR® Commemorative Fighting/Utility Knives
Presentation
Grade USMC
OEF Afghanistan
U.S. ARMY
OEF Afghanistan
USMC
OEF Afghanistan
USN
Vietnam War
U.S. ARMY
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1220S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1225S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1220S-Leather
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Brass/Gold Plated Butt Cap & Guard
#1215-USMC
$297.01
2 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#9168-U.S. ARMY
$114.66
#9169-USMC
$114.66
#9170-USN
$114.66
#9139-U.S. ARMY
$114.66
KA-BAR® Commemorative Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
All Commemorative Fighting/Utility Knives are sold with Leather Sheaths.
Walnut
Presentation
Case
Dimensions: 14.875” x 5.875”
Weight: 2.6 lb
Display any KA-BAR® up to 13”.
Item:
MSRP:
#1437
$96.53
Vietnam War
USMC
Vietnam War
USN
Iraqi Freedom
U.S. ARMY
Iraqi Freedom
USMC
Iraqi Freedom
USN
Dome
Presentation
Case
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1225S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1220S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1225S-Leather
Dimensions: 19” x 6.75” x 8”
Weight: 2.6 lb
Display any KA-BAR® up to 13”.
Knife sold separately.
Item:
MSRP:
#9140-USMC
$114.66
Item:
MSRP:
#9141-USN
$114.66
Item:
MSRP:
#9127*-U.S. ARMY
$114.66
Item:
MSRP:
#9128*-USMC
$114.66
Item:
MSRP:
#9131-USN
$114.66
Item:
MSRP:
#1431
$96.53
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 3
KA-BAR® Leather Handled Fighting/Utility Knives
USMC
Leather Sheath
USMC
Hard Plastic Sheath
USMC
Serrated
USMC
Serrated
U.S. ARMY
Serrated
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather-USMC
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1220S-Leather-U.S.ARMY
Pile Side Serration:
Pile Side Serration:
Pile Side Serration:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Leather Sheath
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather-USMC
Item:
MSRP:
#1217*
$104.90
4 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Item:
MSRP:
#5017
$114.45
#1218*
$104.90
Hard Plastic Sheath
#5018
$114.45
Leather Sheath
#1219*
$104.90
KA-BAR® Leather Handled Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
U.S. ARMY
Serrated
U.S. ARMY
U.S. ARMY
USN
USN
USMC Short
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1220S-Leather-U.S.ARMY
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1225S-Leather-USN
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1250S-Leather-USMC
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Leather Sheath
Hard Plastic Sheath
Leather Sheath
Hard Plastic Sheath
Leather Sheath
Hard Plastic Sheath
Pile Side Serration:
Item:
MSRP:
#5019
$114.45
#1220*
$104.90
#5020
$114.45
#1225*
$104.90
#5025
$114.45
#1250*
$104.90
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 5
KA-BAR® Leather Handled Fighting/Utility Knives
NEW
USA Short
Leather Handle & Sheath
USMC Short
Serrated
Leather Sheath
USA Short
Serrated
Leather Handle & Sheath
Dog’s Head
Utility
Leather Sheath
Big Brother
Leather
Mark I
Leather Handle & Sheath
Leather Handle & Sheath
Designed in cooperation with
Strategic Edge Impact Global Enterprise
(S.E.I.G.E.) of Webster, NY
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1251S-Leather-U.S.A.
Item:
MSRP:
#1251*
$104.90
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1250S-Leather-USMC
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1251S-Leather-U.S.A.
Pile Side Serration:
Pile Side Serration:
Item:
MSRP:
Item:
MSRP:
#1252*
$104.90
#1261*
$104.90
Blade Length: 7”
Overall Length: 12”
Sheath: 1317S-Leather-Dog’s Head
Blade Length: 9.375”
Overall Length: 14.375”
Sheath: 2217S-Leather-U.S.A.
Top Edge Serration:
Item:
MSRP:
#1317
$96.76
Item:
MSRP:
#2217
$133.68
KA-BAR® is unable to ship this
item to certain states including
CA and MA.
6 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
Blade Length: 5.125”
Overall Length: 9.375”
Sheath: 2225S-Leather-USN
Item:
MSRP:
#2225
$99.90
KA-BAR® Kraton G® Handled Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
KA-BAR®
Neck Knife
Hard Plastic Sheath
Full Size
Black KA-BAR®
Leather Sheath
Full Size
Black KA-BAR®
Hard Plastic Sheath
Full Size
Black KA-BAR®
Serrated
Full Size
Black KA-BAR®
Serrated
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1211S-Leather-KA-BAR
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1216S-Hard Plastic (MC)
Pile Side Serration:
Pile Side Serration:
Item:
MSRP:
Item:
MSRP:
Leather Sheath
Blade Length: 3.875”
Overall Length: 7.875”
Sheath: 1117S-Hard Plastic (MC)
Item:
MSRP:
#1117
$56.00
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1211S-Leather-KA-BAR
Item:
MSRP:
#1211*
$96.36
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1216S-Hard Plastic (MC)
Item:
MSRP:
#1213*
$102.07
#1212*
$96.36
Hard Plastic Sheath
#1214*
$102.07
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 7
KA-BAR® Kraton G® Handled Fighting/Utility Knives
Tanto
Hard Plastic Sheath
Short Tanto
Leather Sheath
Short Tanto
Hard Plastic Sheath
Short Tanto
Serrated
Leather Sheath
Blade Length: 8”
Overall Length: 12.8125”
Sheath: 1245S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 1256S-Leather-KA-BAR
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 5016S-Hard Plastic (MC)
Pile Side Serration:
Item:
MSRP:
8 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#1245*
$102.07
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 1256S-Leather-KA-BAR
Pile Side Serration:
Item:
MSRP:
#1254*
$77.38
Item:
MSRP:
#5054
$82.19
Item:
MSRP:
#1255*
$77.38
KA-BAR® Kraton G® Handled Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
Short Tanto
Serrated
Short KA-BAR®
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 5016S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1256S-Leather-KA-BAR
Hard Plastic Sheath
Kraton G® Handle &
Leather Sheath
Short KA-BAR®
Kraton G® Handle &
Hard Plastic Sheath
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 5016S-Hard Plastic (MC)
Pile Side Serration:
Item:
MSRP:
#5055*
$82.19
Item:
MSRP:
#1256*
$77.38
Item:
MSRP:
#1258*
$82.19
Short KA-BAR®
Serrated
Short KA-BAR®
Serrated
Fighter
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1256S-Leather-KA-BAR
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 5016S-Hard Plastic (MC)
Blade Length: 8”
Overall Length: 12.8125”
Sheath: 1271S-Leather/Cordura®
Pile Side Serration:
Pile Side Serration:
Item:
MSRP:
Item:
MSRP:
Kraton G® Handle &
Leather Sheath
#1257*
$77.38
Leather/Cordura® Sheath
Kraton G® Handle &
Hard Plastic Sheath
#1259*
$82.19
Item:
MSRP:
#1271
$99.10
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 9
KA-BAR® Kraton G® Handled Fighting/Utility Knives
Combat Kukri
D2 Extreme
D2 Extreme
D2 Extreme
KA-Fillet 6”
KA-Fillet 9”
Blade Length: 8”
Overall Length: 13.375”
Sheath: 1280S-Heavy-Duty
Polyester (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 8017S-Nylon/Cordura®
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1211S-Leather-KA-BAR
Blade Length: 6.1875”
Overall Length: 10.8125”
Sheath: 1450S-Hard Plastic
Blade Length: 9.1875”
Overall Length: 13.75”
Sheath: 1451S-Hard Plastic
Pile Side Serration:
Pile Side Serration:
Pile Side Serration:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Heavy-Duty Polyester Sheath
#1280
$105.08
Nylon/Cordura® Sheath
Hard Plastic Sheath
(MC)
#1281
$174.75
Made from .165” D2 tool steel.
10 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#1282
$168.15
Made from .165” D2 tool steel.
Leather Sheath
#1283
$173.19
Made from .165” D2 tool steel.
Hard Plastic Sheath
#1450CP
$35.79
Hard Plastic Sheath
#1451CP
$37.90
KA-BAR® Kraton G® Handled Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
Big Brother
Kraton G®
Kraton G® Handle & Leather Sheath
Mark I
Kraton G® Handle &
Hard Plastic Sheath
Full Size
Foliage Green
Hard Plastic Sheath
Designed in cooperation with
Strategic Edge Impact Global Enterprise
(S.E.I.G.E.) of Webster, NY
Blade Length: 9.375”
Overall Length: 14.375”
Sheath: 2211S-Leather-U.S.A.
Hard Plastic Sheath
Blade Length: 5.125”
Overall Length: 9.1875”
Sheath: 2221S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.75”
Sheath: 5011S-Hard Plastic (MC)
Top Edge Serration:
Item:
MSRP:
#2211
$131.73
Full Size
Foliage Green
Serrated
Blade Length: 7”
Overall Length: 11.75”
Sheath: 5011S-Hard Plastic (MC)
Pile Side Serration:
Item:
MSRP:
#2221
$82.19
Item:
MSRP:
#5011
$102.07
Item:
MSRP:
#5012*
$102.07
KA-BAR® is unable to ship this
item to certain states including
CA and MA.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 11
KA-BAR® Heavy Cutting Tools
Cutlass
Machete
Leather/Cordura® Sheath
12 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
Kukri
Machete
Leather/Cordura® Sheath
Heavy-Duty
Warthog
Leather/Cordura® Sheath
Grass
Machete
Cordura® Sheath
Blade Length: 11”
Overall Length: 16.5”
Sheath: 1248S-Leather/Cordura®
Blade Length: 11.5”
Overall Length: 17”
Sheath: 1249S-Leather/Cordura®
Blade Length: 6.75”
Overall Length: 12.25”
Sheath: 1278S-Leather/Cordura®
Blade Length: 14”
Overall Length: 19.5”
Sheath: 1279S-Cordura®
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#1248
$75.04
#1249
$75.04
#1278
$68.51
#1279
$75.04
KA-BAR® Leather Handled Hunters
All KA-BAR® Leather Handled Hunters are sold with plastic lined Leather Sheaths.
Little Finn
Hunter
Skinner
Game Hook
Marine Hunter
Bowie
Blade Length: 3.625”
Overall Length: 7”
Sheath: 1226S-Leather-KA-BAR
Blade Length: 4”
Overall Length: 8.125”
Sheath: 1232S-Leather-KA-BAR
Blade Length: 4.375”
Overall Length: 8.25”
Sheath: 1233S-Leather-KA-BAR
Blade Length: 3.25”
Overall Length: 7.25”
Sheath: 1234S-Leather-KA-BAR
Blade Length: 5.875”
Overall Length: 10.75”
Sheath: 1235S-Leather-KA-BAR
Blade Length: 6.9375”
Overall Length: 11.8125”
Sheath: 1236S-Leather-KA-BAR
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#1226
$43.51
Features Brass Guard and
Aluminum Butt Cap
#1232
$49.91
Features Brass Guard and
Aluminum Butt Cap
#1233
$55.77
Features Brass Guard and
Aluminum Butt Cap
#1234
$53.11
Features Brass Guard and
Aluminum Butt Cap
#1235
$64.31
Features Brass Guard and
Aluminum Butt Cap
#1236
$70.25
Features Brass Guard and
Aluminum Butt Cap
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 13
KA-BAR® MULE Folders
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Black MULE
Black MULE
Serrated
Desert MULE
Blade Length: 3.875”
Open Length: 9.125”
Handle: Zytel®
Sheath: 3050S-Polyester
Blade Length: 3.875”
Open Length: 9.125”
Handle: Zytel®
Sheath: 3050S-Polyester
Blade Length: 3.875”
Open Length: 9.125”
Handle: Zytel®
Sheath: 3052S-Polyester
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Polyester Sheath
Polyester Sheath
Polyester Sheath
#3050*
$64.85
Features a reversible pocket clip
14 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#3051*
$64.85
Features a reversible pocket clip
#3053*
$64.85
Features a reversible pocket clip
KA-BAR® G10 MULE Folders
G10 MULE
G10 MULE
Serrated
G10 MULE
Tanto
G10 MULE
Tanto Serrated
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#3062
$33.58
Features a reversible pocket clip
#3063
$33.58
Features a reversible pocket clip
#3064
$33.58
Features a reversible pocket clip
#3065
$33.58
Features a reversible pocket clip
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 15
KA-BAR® Warthog Folders
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Warthog
Folder
Warthog
Folder
Serrated
Warthog
Tanto Folder
Warthog
Tanto Folder
Serrated
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#3072*
$19.13
Features pocket clip
16 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#3073*
$19.13
Features pocket clip
#3074*
$19.13
Features pocket clip
#3075*
$19.13
Features pocket clip
KA-BAR® Stainless Steel All-Purpose Knives
Agama Folder
Gila Folder
Komodo
Folder
Tegu Folder
Original HOBO
Nylon Sheath
Fork, knife and spoon
pieces come apart.
Blade Length: 3.625”
Open Length: 8.5”
Handle: G10
Blade Length: 3.875”
Open Length: 8.875”
Handle: G10
Blade Length: 3.5”
Open Length: 7.875”
Handle: G10
Blade Length: 2.875”
Open Length: 6.875”
Handle: G10
Blade Length: 3”
Open Length: 6.6250”
Sheath: 1300S-Nylon
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
#3076
$20.95
#3077
$20.95
#3078
$20.95
#3079
$20.95
MSRP:
Features pocket clip
Features pocket clip
Features pocket clip
#1300
#1301 - Clam Pack
$24.64
Features pocket clip
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 17
KA-BAR® Dog’s Head Knives
#6123CU
#6111CU
#6199CU
#6112CU
Coppersmith
Trapper
Coppersmith
Lockback
Small
Coppersmith
Wharncliffe
Barlow
Coppersmith
Lockback
Large
Blade Length: 3.0625”
Overall Length: 6.875”
Handle: Bone
Blade Length: 3”
Overall Length: 6.75”
Handle: Bone
Blade Length: 2.5”
Overall Length: 5.6875”
Handle: Bone
Blade Length: 3.5”
Overall Length: 8.625”
Handle: Bone
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#6111CU
$103.27
#6112CU
$126.32
18 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#6123CU
$111.77
#6199CU
$170.21
KA-BAR® Dog’s Head Knives
#6211CU
#6313CU
#6576CU
Coppersmith
2-Blade Folding
Trapper
Coppersmith
3-Blade
Stockman
Coppersmith
Trailing Point
Hunter
Blade Length: 3.125”
Overall Length: 7.375”
Handle: Bone
Blade Length: 3”
Overall Length: 6.875”
Handle: Bone
Blade Length: 3.5”
Overall Length: 7.75”
Sheath: 3576S-Leather-Dog’s Head
Handle: Bone
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#6211CU
$132.17
#6313CU
$159.39
#6576CU
$172.99
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 19
KA-BAR® Original Zombie® Knives
Zombie®
Kharon Tanto
Folder
Hard Plastic Sheath
Zombie®
Famine
Tanto
Zombie®
War Sword
Blade Length: 3.375”
Open Length: 7.875”
Blade Length: 3.125”
Overall Length: 6.375”
Sheath: 5699S-Hard Plastic
Blade Length: 7.5”
Overall Length: 13”
Sheath: 5700S-Nylon (MC)
Blade Length: 9.6875”
Overall Length: 15.25”
Sheath: 5701S-Nylon (MC)
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#5698
$21.05
Features a reversible pocket clip
20 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
Zombie®
Acheron
Skeleton Knife
#5699BP
$11.59
#5700
$82.11
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - Black
#5701
$84.21
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - Black
KA-BAR® Original Zombie® Knives
Sheaths denoted with (MC) are MOLLE compatible.
KA-BAR®
The Original
Zombie® Knife
Metal Sign
Dimensions: 11” x 17”
Item:
MSRP:
#5700SIGN
$5.00
Zombie®
Pestilence
Chopper
Zombie®
Zomstro
Zombie®
Swabbie
KA-BAR®
The Original Zombie® Knife
No Ammo Required Metal Sign
Blade Length: 10.1875”
Overall Length: 15.75”
Sheath: 5701S-Nylon (MC)
Blade Length: 9.75”
Overall Length: 15.5”
Sheath: 5705S-Nylon (MC)
Blade Length: 12.5”
Overall Length: 18”
Sheath: 5706S-Nylon (MC)
Dimensions: 6” x 24”
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#5702
$84.21
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - Black
#5705
$94.73
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - Black
#5706
$96.84
#5701SIGN
$5.00
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - Black
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 21
NEW
Becker
Campanion
Hard Plastic Sheath
Becker
Campanion
Heavy-Duty Polyester Sheath
Becker
Clear Coat
Campanion
Becker
Tac Tool
Hard Plastic Sheath
Heavy-Duty Polyester Sheath
Blade Length: 5.25”
Overall Length: 10.5”
Sheath: BK2S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 10.5”
Sheath: BK22S-Heavy-Duty
Polyester (MC)
Blade Length: 5.25”
Overall Length: 10.5”
Sheath: BK32S-Heavy-Duty
Polyester (MC)
Blade Length: 7”
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#BK2
$117.95
Made from 0.25” 1095 Cro-Van steel
22 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#BK22
$121.76
Made from 0.25” 1095 Cro-Van steel
#BK32
$121.76
Made from 0.25” 1095 Cro-Van steel
Chisel ground with wire cutter
Overall Length: 12.5”
Sheath: BK3S-Hard Plastic (MC)
#BK3
$154.93
Made from 0.25” 1095 Cro-Van steel
KBD Master Series - Becker Knife & Tool Designs
All current production Becker knives
feature laser etched blade marks.
Sheaths denoted with (MC)
are MOLLE compatible.
NEW
Becker
Machax
Heavy-Duty Polyester Sheath
Becker
Magnum Camp
Heavy-Duty Polyester Sheath
Becker Combat Becker Combat
Utility
Bowie
Heavy-Duty Polyester Sheath
Heavy-Duty Polyester Sheath
Becker
Clear Coat
Combat Bowie
Becker
Crewman
Heavy-Duty Polyester Sheath
Blade Length: 9.375”
Overall Length: 14.6875”
Sheath: BK4S-Heavy-Duty
Polyester (MC)
Blade Length: 8”
Overall Length: 13.5”
Sheath: BK7S-Heavy-Duty
Polyester (MC)
Blade Length: 7”
Overall Length: 12.75”
Sheath: BK7S-Heavy-Duty
Polyester (MC)
Blade Length: 9.25”
Overall Length: 14.75”
Sheath: BK9S-Heavy-Duty
Polyester (MC)
Blade Length: 9.25”
Overall Length: 14.75”
Sheath: BK39S-Heavy-Duty
Polyester (MC)
Blade Length: 5.5”
Overall Length: 11”
Sheath: BK10S-Heavy-Duty
Polyester (MC)
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#BK4
$84.21
Made from 0.188” 1095 Cro-Van steel
#BK5
$84.21
Made from 0.188” 1095 Cro-Van steel
#BK7
$131.75
Made from 0.188” 1095 Cro-Van steel
#BK9
$144.27
Made from 0.188” 1095 Cro-Van steel
#BK39
$144.27
#BK10
$121.76
Made from 0.188” 1095 Cro-Van steel
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 23
KBD Master Series - Becker Knife & Tool Designs
NEW
Becker
Reinhardt
Kukri
Becker
Necker
Blade Length: 13.25”
Overall Length: 18.75”
Sheath: BK21S-Polyester
Blade Length: 3.25”
Overall Length: 6.75”
Sheath: BK11S-Locking
Hard Plastic (MC)
Item:
MSRP:
Item:
MSRP:
#BK21
$200.28
Made from 0.188” 1095 Cro-Van steel
Hard Plastic Sheath
#BK11*
$62.38
Made from 0.165” 1095 Cro-Van steel
Bonus: 550 Cord
24 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
Becker
Remora
Becker
Eskabar
Short Becker
Drop Point
Short Becker
Clip Point
Blade Length: 2.375”
Overall Length: 5.125”
Sheath: BK13S-Hard Plastic
Blade Length: 3.25”
Overall Length: 7”
Sheath: BK11S-Locking
Hard Plastic (MC)
Blade Length: 4.375”
Overall Length: 9.25”
Sheath: BK15S-Cordura® (MC)
Blade Length: 4.375”
Overall Length: 9.25”
Sheath: BK15S-Cordura® (MC)
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Hard Plastic Sheath
#BK13CP
$37.05
Made from 0.125” 1095 Cro-Van steel
Hard Plastic Sheath
#BK14*
$62.38
Made from 0.165” 1095 Cro-Van steel
Bonus: 550 Cord
Cordura® Sheath
#BK16
$109.85
Bonus Set of Handles - Brown
Cordura® Sheath
#BK17
$109.85
Bonus Set of Handles - Brown
BK&T Fastener Info
The standard fastener sizes for the handles
of the large Becker knives are as follows:
Cap Screws: 10 – 32x5/8”
Nuts:
10 – 32
The Allen Wrench used would be
either a 5/32 or 4mm.
KBD Master Series - Becker Knife & Tool Designs
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
For the Short Becker knives, the size
of the wrench is 9/64th.
The size of replacement bolts are
8 - 32 x 1/2” and the nuts are 8 – 32
Belt Clip
The Becker Necker & Eskabar
sheaths are designed to work
with the TDI Metal Belt Clip.
#1480CLIP sold separately.
Item:
MSRP:
NEW
#1480CLIP
$10.35
NEW
Ultramid®
Becker
Handle Kit
Micarta®
Becker
Handle Set
Micarta®
Becker
Handle Set
Zytel®
Becker
Handle Kit
4-Pack of handles for
Full Size Becker knives:
Green canvas Micarta® handle
set for Full Size Becker knives.
Green canvas Micarta® handle
set for Becker Neckers.
Kit includes one set each
Black & Blaze Orange Zytel®
handles for Becker Eskabars.
Green canvas Micarta® handle
set for Short Becker knives.
Contoured, textured G10
handles for Full Size Becker
knives. Made by VZ Grips.
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
for Full Size Becker knives
•
•
•
•
for Full Size Beckers knives
for Becker Neckers
Blue
Red
Green
Pink
Item:
MSRP:
#BKHNDLKIT
$40.00
#BK77HNDL
$45.00
#BK11HNDL
$30.00
for Becker Eskabars
#BK14HNDL
$14.73
Micarta®
Becker
Handle Set
G10 Becker
Handle Set
for Short Becker knives
#BK16HNDL
$35.00
#BK2VZ
$50.00
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 25
Original TDI
Half-Serrated
Last Ditch
Knife
Original TDI
Blade Length: 2.3125”
Overall Length: 5.625”
Sheath: 1477S-Hard Plastic
w/ Belt Clip
Blade Length: 1.625”
Overall Length: 3.625”
Sheath: Hard Plastic
Blade Length: 2.3125”
Overall Length: 5.625”
Sheath: 1480S-Hard Plastic
w/ Belt Clip
Blade Length: 2.3125”
Overall Length: 5.625”
Sheath: 1480S-Hard Plastic
w/ Belt Clip
Blade Length: 3.6875”
Overall Length: 7.5625”
Sheath: 1482S-Hard Plastic
w/ Velcro® Straps (MC)
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Hard Plastic Sheath/Belt Clip
#1477CB*
$55.24
26 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
Hard Plastic Sheath/Belt Clip
Hard Plastic Sheath
#1478BP
$18.85
Original TDI
Serrated
Large TDI
Hard Plastic Sheath/Veclro® Straps
Hard Plastic Sheath/Belt Clip
#1480*
$55.24
#1481*
$55.24
#1482
$65.25
KBD Master Series - TDI Law Enforcement / Hinderer Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
TDI Belt Clip
Fits all TDI and TDI/Hinderer
fixed blade knives except
1478BP. Also fits Becker
Necker (BK11) & Eskabar
(BK14).
#1480CLIP sold separately.
Item:
MSRP:
#1480CLIP
$10.35
NEW
Large TDI
Tanto
TDI Law
Enforcement
Master Key
TDI/Hinderer
Hinderance
TDI/Hinderer
Hell Fire
TDI
Self-Defense
Cane
G10
TDI/Hinderer
Handle Grips
Blade Length: 3.6875”
Overall Length: 7.5625”
Sheath: 1482S-Hard Plastic
w/ Velcro® Straps (MC)
Blade Length: 4”
Overall Length: 13”
Sheath: 2484S-Hard Plastic (MC)
Blade Length: 3.5625”
Overall Length: 7.25”
Sheath: 2485S-Locking Hard
Plastic w/ Belt Clip
Blade Length: 3.5625”
Overall Length: 7.25”
Sheath: 2486S-Locking Hard
Plastic w/ Belt Clip
Overall Length 39”
Weight: 2.15 lb
Contoured, textured G10
handles for TDI/Hinderer
Hinderance and Hell Fire
knives. Made by VZ Grips.
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Hard Plastic Sheath/Veclro® Straps
Hard Plastic Sheath/Belt Clip
Hard Plastic Sheath/Belt Clip
Hard Plastic Sheath
#1485
$65.25
#2484
$67.37
#2485
$103.42
#2486
$103.42
0.100 thick 5052-H32
Aluminum Cane has a 1.0”
diameter and can be cut
shorter for fit.
#9406
$127.65
Item:
MSRP:
#2485VZ
$40.00
Made from 0.25” 1095 Cro-Van steel
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 27
KBD Master Series - Snody Knife Designs
NEW
Snody Boss
Snody
Big Boss
Snody
Snake Charmer
Blade Length: 3.5”
Overall Length: 6.5625”
Sheath: 5101S-JRE Leather
Blade Length: 4.5625”
Overall Length: 9”
Sheath: 5102S-JRE Leather
Blade Length: 2.3125”
Overall Length: 6.5”
Sheath: 5103S-Hard Plastic
Blade Length: 2”
Overall Length: 5.125”
Sheath: 5106S-Hard Plastic
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Leather Sheath
Leather Sheath
#5101
$142.19
#5102
$195.79
Hard Plastic Sheath
#5103
$103.79
Made from 0.125” S35VN stainless steel Made from 0.188” S35VN stainless steel Made from 0.125” S35VN stainless steel
Bonus Set of Purple Handles,
Bonus Set of Purple Handles,
Bonus Items: 550 Cord & Bead
550 Cord & Bead
550 Cord & Bead
28 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
Snody
Administrator
Hard Plastic Sheath
#5106BP
$11.59
KBD Master Series - Dozier Designs
*
Clam Pack available for these items. Simply place a “CP”
following the item number when ordering.
NEW
#4062BL Blue
#4062BO Blaze Orange
#4062CB Coyote Brown
#4062FG Foliage Green
#4062PK Pink
#4072PK Pink
#4062ZG* Zombie® Green
#4072ZG Zombie® Green
Folding Hunter
Folding
Thumb Notch
Mini Dozier
Folder
Blade Length: 3”
Open Length: 7.25”
Blade Length: 3”
Open Length: 7.25”
Blade Length: 2.25”
Open Length: 5.75”
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#4062*
$28.01
Features a reversible
pockect clip & thumb stud
#4065*
$28.01
Features a reversible pockect clip
#4072
$23.85
Features a reversible
pockect clip & thumb stud
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 29
KBD Master Series - Johnson Adventure® Blades
Sheaths denoted with (MC) are MOLLE compatible.
Adventure®
Piggyback®
Folder
Adventure®
Piggyback®
Adventure®
Gamestalker®
Adventure®
Wharnstalker®
Blade Length: 3.375”
Overall Length: 7.875”
Blade Length: 2.625”
Overall Length: 6”
Sheath: 5599S-Hard Plastic
Blade Length: 4.0625”
Overall Length: 8”
Sheath: 5602S-Nylon (MC)
Blade Length: 4.0938”
Overall Length: 8”
Sheath: 5602S-Nylon (MC)
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#5597
$21.05
Features a reversible pocket clip
30 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
#5599BP
$11.59
#5602
$61.06
Made from 0.188” 440A stainless steel
#5604
$61.06
Made from 0.188” 440A stainless steel
KA-BAR® Accessories
KA-BAR®
Lake Effect
Ice Scraper
KA-BARLEY
Bottle Opener
Ultramid® ice scraper makes
short work of cleaning ice off
your windshield and can be
used alternately as a
self-defense tool.
Made of GFN-PA66 and
featuring the traditional
KA-BAR oval-shaped handle,
the KA-BARLEY makes light
work of prying off bottle caps.
Item:
MSRP:
Item:
MSRP:
#9906
$6.93
#9907
$6.93
NEW
Adventure®
Potbelly®
Adventure®
Parangatang®
KA-BAR®
Playing Cards
KA-BAR®
Retro Posters
Blade Length: 7.25”
Overall Length: 12.75”
Sheath: 5600S-Heavy-Duty
Polyester (MC)
Blade Length: 14.125”
Overall Length: 19.6250”
Sheath: 5603S-Cordura® (MC)
KA-BAR® playing cards are
reminiscent of decks issued
to soldiers during WWII, but
feature back art made famous
during the Afghanistan conflict.
Faces are custom-designed and
all cards are textured.
Inspired by World War II
propaganda posters, designs
are perfect for your dorm, work
shop, home office or man cave.
Pack features all four poster
designs. Each poster measures
24” x 30”.
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
Item:
MSRP:
#5600
$84.21
Made from 0.25” 1095 Cro-Van steel
Bonus Blade - #5599 Knife Only
#5603
$98.95
#9914
$6.93
#9915
$20.00
Made from 0.188” 1095 Cro-Van steel
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 31
KA-BAR® Product Specification Chart
Item #
Page
MSRP
Bulk
Weight*
Overall/
Open Length
Blade
Length
Blade Stamp
Steel
Thickness
Grind
Angle
HRC
Lock
Handle
Sheath
Mft’d
BK2
22
$117.95
1
10.5”
5.25”
KA-BAR/BK&T
1095 Cro-Van
0.25
flat
20°
56-58
N/A
Ultramid®
BK2S
USA
BK3
22
$154.93
1.3
12.5”
7"
KA-BAR/BK&T
1095 Cro-Van
0.25
flat
20°
56-58
N/A
Ultramid®
BK3S
USA
BK4
23
$84.21
1
14.6875”
9.375”
KA-BAR/BK&T
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
BK4S
USA
BK5
23
$84.21
0.75
13.5”
8”
KA-BAR/BK&T
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
BK7S
USA
BK7
23
$131.75
0.85
12.75”
7"
KA-BAR/BK&T
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
BK7S
USA
BK9
23
$144.27
1.05
14.75”
9.25”
KA-BAR/BK&T
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
BK9S
USA
BK10
23
$121.76
0.75
11”
5.5”
KA-BAR/BK&T
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
BK10S
USA
USA
BK11
24
$62.38
0.2
6.75”
3.25”
KA-BAR/BK&T
1095 Cro-Van
0.165
flat
20°
56-58
N/A
1095 Cro-Van
BK11S
BK13CP
24
$37.05
0.1
5.125”
2.375”
KA-BAR/BK&T
1095 Cro-Van
0.125
hollow
20°
55-57CR
N/A
1095 Cro-Van
BK13S
USA
BK14
24
$62.38
0.15
7”
3.25”
KA-BAR/BK&T
1095 Cro-Van
0.165
flat
20°
56-58
N/A
1095 Cro-Van
BK11S
USA
USA
BK16
24
$109.85
0.4
9.25”
4.375”
KA-BAR/BK&T
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Ultramid®
BK15S
BK17
24
$109.85
0.4
9.25”
4.375”
KA-BAR/BK&T
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Ultramid®
BK15S
USA
BK21
24
$200.28
1.4
18.75”
13.25”
KA-BAR/BK&T
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
BK21S
USA
BK22
22
$121.76
1
10.5”
5.25”
KA-BAR/BK&T
1095 Cro-Van
0.25
flat
20°
56-58
N/A
Ultramid®
BK22S
USA
BK32
22
$121.76
1
10.5”
5.25”
KA-BAR/BK&T
1095 Cro-Van
0.25
flat
20°
56-58
N/A
Ultramid®
BK32S
USA
BK39
23
$144.27
1.05
14.75”
9.25”
KA-BAR/BK&T
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
BK39S
USA
1117
7
$56.00
0.15
7.875”
3.875”
KA-BAR
1095 Cro-Van
0.125
flat
20°
56-58
N/A
1095 Cro-Van
1117S
USA
1211
7
$96.36
0.7
11.75”
7"
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1211S
USA
1212
7
$96.36
0.7
11.75”
7"
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1211S
USA
1213
7
$102.07
0.7
11.75”
7"
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1216S
USA
1214
7
$102.07
0.7
11.75”
7"
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1216S
USA
1215
2
$297.01
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1217S
USA
1217
4
$104.90
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1217S
USA
1218
4
$104.90
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1217S
USA
1219
4
$104.90
0.7
11.875”
7"
US ARMY
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1220S
USA
1220
5
$104.90
0.7
11.875”
7"
US ARMY
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1220S
USA
1225
5
$104.90
0.7
11.875”
7"
USN
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1225S
USA
1226
13
$43.51
0.1
7"
3.625”
KA-BAR
DIN 1.4116 SS
0.094
hollow
N/A
55-57
N/A
Leather
1226S
TAIWAN
1232
13
$49.91
0.2
8.125”
4"
KA-BAR
DIN 1.4116 SS
0.11
hollow
N/A
55-57
N/A
Leather
1232S
TAIWAN
1233
13
$55.77
0.2
8.25”
4.375”
KA-BAR
DIN 1.4116 SS
0.11
hollow
N/A
55-57
N/A
Leather
1233S
TAIWAN
1234
13
$53.11
0.2
7.25”
3.25”
KA-BAR
DIN 1.4116 SS
0.11
hollow
N/A
55-57
N/A
Leather
1234S
TAIWAN
1235
13
$64.31
0.45
10.75”
5.875”
KA-BAR
DIN 1.4116 SS
0.125
hollow
N/A
55-57
N/A
Leather
1235S
TAIWAN
1236
13
$70.25
0.45
11.8125”
6.9375”
KA-BAR
DIN 1.4116 SS
0.125
hollow
N/A
55-57
N/A
Leather
1236S
TAIWAN
1245
8
$102.07
0.7
12.8125”
8"
USA
1095 Cro-Van
0.165
hollow
20°
56-58
N/A
Black Kraton G®
1245S
USA
1248
12
$75.04
1.1
16.5”
11"
KA-BAR
1085 Carbon
0.165
hollow
N/A
52-54
N/A
TPR
1248S
TAIWAN
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
32 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Product Specification Chart
MSRP
Bulk
Weight*
Item #
Page
1249
12
$75.04
1.3
1250
5
$104.90
0.4
Overall/
Open Length
Blade
Length
Blade Stamp
17"
11.5”
KA-BAR
9.25”
5.25”
USMC
Steel
Thickness
Grind
Angle
HRC
Lock
1085 Carbon
0.165
hollow
N/A
52-54
N/A
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Handle
Sheath
Mft’d
TPR
1249S
TAIWAN
Leather
1250S
USA
1251
6
$104.90
0.4
9.25”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1251S
USA
1252
6
$104.90
0.4
9.25”
5.25”
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1250S
USA
1254
8
$77.38
0.35
9.375”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1256S
USA
1255
8
$77.38
0.35
9.375”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1256S
USA
1256
9
$77.38
0.4
9.25”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1256S
USA
1257
9
$77.38
0.4
9.25”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1256S
USA
1258
9
$82.19
0.4
9.25”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
5016S
USA
1259
9
$82.19
0.4
9.25”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
5016S
USA
1261
6
$104.90
0.4
9.25”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1251S
USA
1271
9
$99.10
0.75
12.8125”
8"
USA
1095 Cro-Van
0.165
hollow
20°
56-58
N/A
Black Kraton G®
1271S
USA
1278
12
$68.51
1.05
12.25”
6.75”
KA-BAR
1085 Carbon
0.25
flat
N/A
52-54
N/A
TPR
1278S
TAIWAN
1279
12
$75.04
1.25
19.5”
14
KA-BAR
1085 Carbon
0.165
duplex
N/A
52-54
N/A
TPR
1279S
TAIWAN
1280
10
$105.08
0.9
13.375”
8"
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
1280S
USA
1281
10
$174.75
0.75
11.875”
7"
USA
D2
0.188
flat
20°
59-60CR
N/A
Black Kraton G®
8017S
USA
1282
10
$168.15
0.75
11.875”
7"
USA
D2
0.188
flat
20°
59-60CR
N/A
Black Kraton G®
1216S
USA
1283
10
$173.19
0.75
11.875”
7"
USA
D2
0.188
flat
20°
59-60CR
N/A
Black Kraton G®
1211S
USA
1300
17
$24.64
0.35
6.625”
3"
KA-BAR
420j2 SS
0.078
flat
N/A
52-54
lockback
Stainless Steel
1300S
CHINA
1317
6
$96.76
0.7
12”
7”
KA-BAR/Dog’s Head
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1317S
USA
1450CP
10
$35.79
0.25
10.8125”
6.1875”
KA-BAR
440A SS
0.083
hollow
N/A
55-57
N/A
Black Kraton G®
1450S
USA
1451CP
10
$37.90
0.25
13.75”
9.1875”
KA-BAR
440A SS
0.083
hollow
N/A
55-57
N/A
Black Kraton G®
1451S
USA
1477CB
26
$55.24
0.2
5.625”
2.3125”
KA-BAR/TDI
AUS 8A SS
0.125
hollow
N/A
57-59CR
N/A
Coyote Brown Zytel®
1477CBS
TAIWAN
1478BP
26
$18.85
0.15
3.625”
1.625”
KA-BAR/TDI
9Cr18 SS
0.078
flat
18°
58-59CR
N/A
9cr18 SS
Included
TAIWAN
1480
26
$55.24
0.2
5.625”
2.3125”
KA-BAR/TDI
AUS 8A SS
0.125
hollow
N/A
57-59CR
N/A
Black Zytel®
1480S
TAIWAN
1481
26
$55.24
0.2
5.625”
2.3125”
KA-BAR/TDI
AUS 8A SS
0.125
hollow
N/A
57-59CR
N/A
Black Zytel®
1480S
TAIWAN
1482
26
$65.25
0.4
7.5625”
3.6875”
KA-BAR/TDI
AUS 8A SS
0.188
hollow
N/A
57-59CR
N/A
Black Zytel®
1482S
TAIWAN
1485
27
$65.25
0.4
7.5625”
3.6875”
KA-BAR/TDI
AUS 8A SS
0.188
hollow
N/A
57-59CR
N/A
Black Zytel®
1482S
TAIWAN
2211
11
$131.73
0.9
14.375”
9.375”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
2211S
USA
2217
6
$133.68
0.9
14.375”
9.375”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
2217S
USA
2221
11
$82.19
0.5
9.1875”
5.125”
USN
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
2221S
USA
2225
6
$99.90
0.5
9.375”
5.125”
USN
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
2225S
USA
2484
27
$67.37
1.4
13”
4”
KA-BAR/TDI
1095 Cro-Van
0.25
flat
20°
56-58
N/A
1095 Cro-Van
2484S
USA
2485
27
$103.42
0.35
7.25”
3.5625”
KA-BAR/TDI/Hinderer
1095 Cro-Van
0.188
flat
20°
56-58
N/A
Ultramid®
2485S
USA
2486
27
$103.42
0.35
7.25”
3.5625”
KA-BAR/TDI/Hinderer
1095 Cro-Van
0.188
hollow
20°
56-58
N/A
Ultramid®
2486S
USA
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 33
KA-BAR® Product Specification Chart
Item #
Page
MSRP
Bulk
Weight*
Overall/
Open Length
Blade
Length
Blade Stamp
Steel
Thickness
Grind
Angle
HRC
Lock
Handle
Sheath
Mft’d
3050
14
$64.85
0.45
9.125”
3.875”
KA-BAR
AUS 8A SS
0.125
hollow
N/A
57-59CR
lockback
Black Zytel®
3050S
TAIWAN
3051
14
$64.85
0.45
9.125”
3.875”
KA-BAR
AUS 8A SS
0.125
hollow
N/A
57-59CR
lockback
Black Zytel®
3050S
TAIWAN
3053
14
$64.85
0.45
9.125”
3.875”
KA-BAR
AUS 8A SS
0.125
hollow
N/A
57-59CR
lockback
Desert Zytel®
3052S
TAIWAN
3062
15
$33.58
0.6
9.25”
3.9375”
KA-BAR
420 SS
0.125
hollow
N/A
52-54
lockback
G10
N/A
CHINA
3063
15
$33.58
0.6
9.25”
3.9375”
KA-BAR
420 SS
0.125
hollow
N/A
52-54
lockback
G10
N/A
CHINA
3064
15
$33.58
0.6
9.25”
3.9375”
KA-BAR
420 SS
0.125
hollow
N/A
52-54
lockback
G10
N/A
CHINA
3065
15
$33.58
0.6
9.25”
3.9375”
KA-BAR
420 SS
0.125
hollow
N/A
52-54
lockback
G10
N/A
CHINA
3072
16
$19.13
0.3
7.5625”
3”
KA-BAR
420 SS
0.11
hollow
N/A
52-54
side lock
G10
N/A
CHINA
3073
16
$19.13
0.3
7.5625”
3”
KA-BAR
420 SS
0.11
hollow
N/A
52-54
side lock
G10
N/A
CHINA
3074
16
$19.13
0.3
7.5625”
3”
KA-BAR
420 SS
0.11
hollow
N/A
52-54
side lock
G10
N/A
CHINA
3075
16
$19.13
0.3
7.5625”
3”
KA-BAR
420 SS
0.11
hollow
N/A
52-54
side lock
G10
N/A
CHINA
3076
17
$20.95
0.3
8.5”
3.625”
KA-BAR
420 SS
0.11
hollow
N/A
50-52CR
side lock
G10
N/A
CHINA
3077
17
$20.95
0.4
8.875”
3.875”
KA-BAR
420 SS
0.11
hollow
N/A
50-52CR
side lock
G10
N/A
CHINA
3078
17
$20.95
0.3
7.875”
3.5”
KA-BAR
420 SS
0.11
hollow
N/A
50-52CR
side lock
G10
N/A
CHINA
3079
17
$20.95
0.25
6.875”
2.875”
KA-BAR
420 SS
0.11
hollow
N/A
50-52CR
side lock
G10
N/A
CHINA
4062
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Black Zytel®
N/A
TAIWAN
4062BL
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Blue Zytel®
N/A
TAIWAN
4062BO
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Blaze Orange Zytel®
N/A
TAIWAN
4062CB
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Coyote Brown Zytel®
N/A
TAIWAN
4062FG
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Foliage Green Zytel®
N/A
TAIWAN
4062PK
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Pink Zytel®
N/A
TAIWAN
4062ZG
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Zombie® Green Zytel®
N/A
TAIWAN
4065
29
$28.01
0.15
7.25”
3"
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Black Zytel®
N/A
TAIWAN
4072
29
$23.85
0.05
5.75”
2.25”
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Black Zytel®
N/A
TAIWAN
4072PK
29
$23.85
0.05
5.75”
2.25”
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Pink Zytel®
N/A
TAIWAN
4072ZG
29
$23.85
0.05
5.75”
2.25”
KA-BAR/DOZIER
AUS 8A SS
0.11
hollow
N/A
56-58CR
lockback
Zombie® Green Zytel®
N/A
TAIWAN
5011
11
$102.07
0.7
11.75”
7"
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Foliage Green Kraton G®
5011S
USA
5012
11
$102.07
0.7
11.75”
7"
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Foliage Green Kraton G®
5011S
USA
5017
4
$114.45
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1216S
USA
5018
4
$114.45
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1216S
USA
5019
5
$114.45
0.7
11.875”
7"
US ARMY
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1216S
USA
5020
5
$114.45
0.7
11.875”
7"
US ARMY
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1216S
USA
5025
5
$114.45
0.7
11.875”
7"
USN
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1216S
USA
5054
8
$82.19
0.35
9.375”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
5016S
USA
5055
9
$82.19
0.35
9.375”
5.25”
USA
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Black Kraton G®
5016S
USA
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
34 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Product Specification Chart
MSRP
Bulk
Weight*
Overall/
Open Length
28
$142.19
0.15
28
$195.79
0.4
Item #
Page
5101
5102
Blade
Length
Blade Stamp
Steel
6.5625”
3.5”
KA-BAR/Snody
9”
4.5625”
KA-BAR/Snody
Thickness
Grind
Angle
HRC
Lock
Handle
Sheath
Mft’d
S35VN SS
0.125
flat
20°
58-62
N/A
S35VN SS
0.188
flat
20°
58-62
N/A
Zytel®
5101S
USA
Zytel®
5102S
USA
58-62
N/A
S35VN SS
5103S
USA
5CR15 SS
5106S
CHINA
5103
28
$103.79
0.1
6.5”
2.3125”
KA-BAR/Snody
S35VN SS
0.125
hollow
20°
5106BP
28
$11.59
0.1
5.125”
2”
KA-BAR/Snody
5CR15 SS
0.125
hollow
18°
57-59
N/A
5597
30
$21.05
0.2
7.875”
3.375”
KA-BAR/JAB
AUS 8A SS
0.11
hollow
N/A
57-58
lockback
GFN-PA66
N/A
TAIWAN
5599BP
30
$11.59
0.05
6"
2.625”
KA-BAR/”A”
5 Cr13 SS
0.11
flat
18°
52-54
N/A
5Cr13 SS
5599S
CHINA
5600
30
$84.21
1.1
12.75”
7.25”
KA-BAR/”A”
1095 Cro-Van
0.25
flat
20°
56-58
N/A
GFN-PA66
5600S
USA
5602
30
$61.06
0.25
8”
4.0625”
KA-BAR/”A”
440A SS
0.188
hollow
20°
55-58
N/A
GFN-PA66
5602S
USA
5603
30
$98.95
1.3
19.625”
14.125”
KA-BAR/”A”
1095 Cro-Van
0.188
flat
20°
56-58
N/A
GFN-PA66
5603S
USA
5604
30
$61.06
0.25
8”
4.0938”
KA-BAR/”A”
440A SS
0.188
hollow
20°
55-58
N/A
GFN-PA66
5602S
USA
5698
20
$21.05
0.2
7.875”
3.375”
KA-BAR/ZK
AUS 8A SS
0.11
flat
N/A
57-58
lockback
GFN-PA66
N/A
TAIWAN
5699BP
20
$11.59
0.05
6.375”
3.125”
KA-BAR/ZK
5 Cr13 SS
0.11
hollow
18°
52-54
N/A
5 Cr13 SS
5699S
CHINA
5700
21
$82.11
0.95
13”
7.5”
KA-BAR/ZK/USA
1095 Cro-Van
0.188
flat
20°
56-58
N/A
GFN-PA66
5700S
USA
5701
21
$84.21
0.95
15.25”
9.6875”
KA-BAR/ZK/USA
1095 Cro-Van
0.188
flat
20°
56-58
N/A
GFN-PA66
5701S
USA
5702
21
$84.21
1
15.75”
10.1875”
KA-BAR/ZK/USA
1095 Cro-Van
0.188
flat
20°
56-58
N/A
GFN-PA66
5701S
USA
5705
21
$94.73
1.6
15.5”
9.75”
KA-BAR/ZK/USA
1095 Cro-Van
0.25
flat
20°
56-58
N/A
GFN-PA66
5705S
USA
5706
21
$96.84
1.6
18”
12.5”
KA-BAR/ZK/USA
1095 Cro-Van
0.25
flat
20°
56-58
N/A
GFN-PA66
5706S
USA
6111CU
18
$103.27
0.15
6.875”
3.0625”
KA-BAR
440C SS
N/A
flat
N/A
56-68
slip joint
Bone
N/A
USA
6112CU
18
$126.32
0.25
6.75”
3"
KA-BAR
440C SS
0.11
flat
N/A
56-58
lockback
Bone
N/A
USA
6123CU
18
$111.77
0.2
5.6875”
2.5”
KA-BAR
440C SS
N/A
flat
N/A
56-68
slip joint
Bone
N/A
USA
6199CU
18
$170.21
0.25
8.625"
3.5”
KA-BAR
440C SS
0.11
flat
N/A
56-58
lockback
Bone
N/A
USA
6211CU
19
$132.17
0.25
7.375”
3.125”
KA-BAR
440C SS
N/A
flat
N/A
56-68
slip joint
Bone
N/A
USA
6313CU
19
$159.39
0.2
6.875”
3”
KA-BAR
440C SS
N/A
flat
N/A
56-68
slip joint
bone
N/A
USA
6576CU
19
$172.99
0.35
7.75”
3.5”
KA-BAR
440C SS
N/A
hollow
N/A
56-68
N/A
Bone
N/A
USA
9127
3
$114.66
0.7
11.875”
7"
US ARMY
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1220S
USA
9128
3
$114.66
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1217S
USA
9131
3
$114.66
0.7
11.875”
7"
USN
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1225S
USA
9139
2
$114.66
0.7
11.875”
7"
US ARMY
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1220S
USA
9140
3
$114.66
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1217S
USA
9141
3
$114.66
0.7
11.875”
7"
USN
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1225S
USA
9168
2
$114.66
0.7
11.875”
7"
US ARMY
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1220S
USA
9169
2
$114.66
0.7
11.875”
7"
USMC
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1217S
USA
9170
2
$114.66
0.7
11.875”
7"
USN
1095 Cro-Van
0.165
flat
20°
56-58
N/A
Leather
1225S
USA
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 35
KA-BAR® Product Overview & Size Comparison Chart
The average
backpack measures
18” in height
18”
The average
household hammer
measures 13”
in height
The average
shoe size of an adult
male measures 10.5”
12”
The average
16.9 oz water bottle
measures 8”
in height
6”
1478BP
The average
smart phone measures
6” in height
5106
BK13CP 6123CU 1477CB
1480
1481
4072 5599BP 5699BP 5103
5101
6112CU BK11
36 I KA-BAR® • HARDCORE KNIVES. HARDCORE LIVES.
6111CU 6313CU BK14
1226
4062
4065
6211CU
1234
2485
2486
1482
1485
3072
3073
3074
3075
5602
5604
2486
1117
3078
6576CU
5698
1232
1233
6199CU
3076
3077
5102
3050
3051
3053
3062
3063
3064
3065
BK16
BK17
1250
1251
1252
1256
1257
1258
1259
1261
1254
1255
5054
5055
2221
2225
BK2
BK22
BK32
1235
1450CP
BK10
1236
1211
1212
1213
1214
1215
1217
1218
1219
1220
1225
5011
5012
5017
5018
5019
5020
5025
9127
9128
9131
9139
9140
9141
9168
9169
9170
1317
1281
1282
1283
1278
1245
BK3
5600
KA-BAR® Product Overview & Size Comparison Chart
18”
12”
6”
1271
5700
BK7
2484
1280
BK5
1451CP
2211
2217
BK9
BK39
BK4
5701
5705
5702
1248
1249
5706
BK21
5603
1279
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 38
KA-BAR® Warranty, Care and Storage
LIMITED LIFETIME WARRANTY
Caring for your KA-BAR®
KA-BAR Knives, Inc. (the “Company”) warrants, to the original purchaser of the knife only, that this knife will be free
from defects in material and craftsmanship under normal use and maintenance for the lifetime of the original purchaser.
This Limited Warranty does not apply to any failure of, defect in, or damage to the knife caused by neglect, normal wear
and tear, or by improper use, including throwing the knife, batoning with the knife, using the blades as a can opener,
chisel, pry bar, screwdriver, digging tool, or for any heavy work for which the knife was not designed.
Wipe blades after use with a dry, soft cloth.
If knives are exposed to salt water, wash with mild
dish detergent, rinse with tap water, then wipe with
a dry, soft cloth.
If the knife fails to satisfy this Limited Warranty, the Company will repair or replace the knife or substitute a knife of
comparable value, at the Company’s option, and such repair, replacement or substitution shall constitute the sole remedy
for any failure of the knife to satisfy this Limited Warranty or any implied warranty (ies) of the Company. In order to have
a Limited Warranty claim evaluated by the Company, you must return the knife, at your own expense and risk, to KA-BAR
Knives, Inc., at 200 Homer Street, Olean, NY 14760, attention Customer Service Department. Please include with the
returned knife a brief written description of any claimed defect(s) in or failure(s) of the knife. Any returned knife
determined by the Company to not be eligible for repair, replacement or substitution under the terms of the
Limited Warranty will be returned to the Owner.
THE COMPANY MAKES NO EXPRESS WARRANTY OR REPRESENTATION WHATSOEVER OF OR WITH RESPECT TO
THE KNIFE OTHER THAN THE FOREGOING LIMITED WARRANTY, AND ALL SUCH OTHER EXPRESS WARRANTIES
ARE HEREBY EXPRESSLY EXCLUDED. ANY IMPLIED WARRANTIES OF THE COMPANY, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS, ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
THE COMPANY WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, AND ALL
SUCH DAMAGES ARE EXPRESSLY EXCLUDED.
Some states do not allow limitations on how long an implied warranty lasts, or exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Storing
Treat blade with a light coating of mineral
oil before storing in a dry area separate from
its sheath. If possible, store in paper sleeve
provided with the knife at purchase.
Sharpening
Keep knives sharp by touching up edges as needed. Most KA-BAR®
knives can be sharpened using an
Arkansas stone or commonly available sharpening
system. Most knives can easily be touched up using
a coarse or hard stone.
When bringing back a very dull edge a coarse
or hard stone should be used first, followed by
a finer, softer stone.
Knives made with D2 steel require diamond or ceramic sharpeners.
Knives should at no time be sharpened on a belt sander or bench
grinder. These machines ruin a factory-sharpened edge.
The following photos are courtesy of Duane Erickson:
Cover/Pages 2, 4, 7, 8, 11, 14, 17 & 26.
To learn more about Duane and MILpriority Photo
visit DuaneEricksonPhoto.com.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 39
Manufacturer Representatives for KA-BAR® Dealers and Distributors
Alabama, Connecticut, D.C., Delaware, Florida,
Georgia, Kentucky, Maine, Maryland, Massachusetts,
Mississippi, New Hampshire, New Jersey, New York,
Pennsylvania, Rhode Island, Vermont, Virginia,
and West Virginia
Jones and Company, Inc.
7806 S.W. Ellipse Way
Stuart, FL 34997-7209
772-221-0100
Fax: 772-221-2266
Arkansas, Louisiana, Oklahoma, and Texas
Laylock and Associates
1050 E. 2nd Street #167
Edmond, OK 73034-5313
405-715-2764
Fax: 405-715-4963
Alaska, Arizona, California, Colorado, Hawaii, Idaho,
Montana, Nevada, New Mexico, Oregon, Utah,
Washington, and Wyoming
Owen J. Brown and
Associates
15235 Brand Boulevard No. A-106
Mission Hills, CA 91345
818-365-4822
Fax: 818-365-8622
Illinois, Iowa, Kansas, Michigan, Minnesota, Missouri,
Nebraska, North Dakota, South Dakota and Wisconsin.
Proactive Sales & Marketing
15880 Blue Mound Road
Valley Falls, KS 66088-5183
785-945-6689
Fax: 785-945-6863
Indiana and Tennessee
V&R Sales, Inc.
3365 Sheila Circle
White Pine, TN 37890-3603
606-434-9146
Fax: 866-834-5490
Military and Contracting
Rocket Sales
2108 S. FM 113, PO Box 249
Millsap, TX 76066-2204
940-682-4501
Fax: 940-682-4109
North Carolina, Ohio, South Carolina
and International Sales
KA-BAR®
200 Homer Street
Olean, New York 14760
800.282.0130
Fax: 716.790.7188
info@ka-bar.com
KA-BAR.com
KABAR CATALOG - 2016
6
17717 09999
1

Similar documents