Roto Machines Ltd

Transcription

Roto Machines Ltd
Leading Manufacturer of Rotomould Machines
Shuttles • Carousels • Materials Handling Systems • Custom Designs
Roto Machines Ltd
Carousel / Independent Arm Machines
Key Benefits
Aerodynamic Oven:
Zero cool spots increases
productivity & quality.
Precision Engineering:
Minimal downtime, 24 hour
reliability & no spares inventory.
Full Training:
Operational / Technicians.
Model
Floor Area
Length Width Height
A
Drop Arm
B
C
D
Max
Load
E
Straight Arm
F
G
H
Max
Load
HB210
12.4 m 8.2 m
3.4 m
x 1600
R1060
645
1340
650 Kg
x 1900
R1060
155
315
800 Kg
HB240
12.5 m 8.9 m
3.7 m
x 1850
R1200
700
1465
925 Kg
x 2000
R1200
205
465
100 Kg
HB260
13.2 m 9.5 m
3.9 m
x 2000
R1300
800
1630
1100 Kg
x 2360
R1300
205
340
200 Kg
HB290
14.5 m 10.5 m 4.2 m
x 2250
R1450
885
1800
1150 Kg
x 2600
R1450
205
437
400 Kg
HB320
16.5 m 11.5 m 4.3 m
x 2600
R1610
900
1850
1300 Kg
x 2900
R1610
205
495
550 Kg
HB340
17.3 m 11.5m
4.5 m
x 2970
R1700
800
1625
1400 Kg
x 3000
R1700
205
595
700 Kg
HB360
18.9 m 13.4 m 4.9 m
x 3000
R1810
1000
2013
1815 Kg
x 3300
R1810
205
539
200 Kg
HB380
19.5 m 14.1 m 5.1 m
x 3250
R1910
1000
2000
2000 Kg
x 3500
R1910
220
539
400 Kg
HB400
22.0 m 15.1 m 5.5 m
x 3500
R2015
1000
2000
2200 Kg
x 3800
R2015
220
450
2600 Kg
HB450
22.4 m 15.7 m 5.9 m
x 3600
R2250
1250
2600
2750 Kg
x 4000
R2250
235
796
2750 Kg
HB500
22.8 m 16.6 m 6.2 m
x 4000
R2500
1400
2900
3125 Kg
x 4400
R2500
235
952
3125 Kg
HB550
24.0 m 17.8 m 6.9 m
x 4120
R2775
1650
3509
3250 Kg
x 5310
R2775
237.5
570
3250 Kg
Roto Machines Ltd
Shuttle / Single - Double End Machines
Machine / Process Control:
State of the art control technology.
Allows full automation of process
cycles from pre-determined recipes
and control parameters.
Factory Pre-tested:
Prior to shipping.
Model
Floor Area
Single Double
Length Length Width
C160
6.4 m
C200
7.4 m
C210
C240
Height
A
Drop Arm
B
C
D
11.0 m 3.7 m
2.9 m
x 1220
R805
475
12.0 m 4.6 m
3.3 m
x 1400
R1025
650
7.9 m
13.0 m 6.0 m
4.1 m
x 1600
R1060
9.0 m
15.6 m 6.4 m
4.3 m
x 1850
R1200
C260
9.5 m
16.5 m 6.6 m
4.4 m
x 2000
C290
10.3 m 17.8 m 7.4 m
4.8 m
C320
11.5 m 19.5 m 7.6 m
C340
Max
Load
E
Straight Arm
F
G
H
Max
Load
1000 280 Kg
x 1220
R805
140
3855 328 Kg
1400 400 Kg
x 1550
R1025
150
520
500 Kg
645
1340 650 Kg
x 1900
R1060
155
315
800 Kg
700
1465 925 Kg
x 2000
R1200
205
465
100 Kg
R1300
800
1630 1000 Kg
x 2360
R1300
205
340
1200 Kg
x 2250
R1450
885
1625 1150 Kg
x 2600
R1450
205
437
1400 Kg
5.0 m
x 2600
R1610
900
1850 1300 Kg
x 2900
R1610
205
495
1550 Kg
12.4 m 21.4 m 8.0 m
5.2 m
x 2970
R1700
800
1625 1400 Kg
x 3000
R1700
205
595
1700 Kg
C400
-
-
-
-
x 3200
R2000
1080
2280 2600 Kg
-
-
-
-
-
C450
-
-
-
-
x 3600
R2250
1200
2250 2750 Kg
-
-
-
-
-
C500
-
-
-
-
x 4000
R2500
1300
2800 2900 Kg
-
-
-
-
-
C550
-
-
-
-
x 4400
R2750
1420
3000 3050 Kg
-
-
-
-
-
Tel: +44 (0)1933 665361 • Email: sales@rotomachines.co.uk
Rocking Oven Machines
Rotomachines Rocking Ovens are a new addition to our range
of rotational moulding machines and can be manufactured to
customers size and specification. Rocking Ovens are an
extremely versatile and cost effective way of moulding large
products and will take up very little floor space compared to
other machines.
Specifications:
• Forced draught burner system with modulating gas valve
• Variable speed inverter control
• Recirculating heat fan inverter controlled
• Forward and reverse on roll motor
• Timers for cook, cure, cooling, roll reversing and dwell
• Internal air
• Robust construction
Model
A
B
C
D
E
F
G
H
RRO-2.5
6.1m
3.2m
2.6m
4.3m
5.2m
2.9m
5.2m
3.6m
2500 x 1500
Capacity
Max Load
1000 Kg
RRO-3
7.1m
3.7m
2.9m
4.8m
6.1m
3.2m
6.1m
4.3m
3000 x 2000
1500 Kg
RRO-5
8.1m
4.4m
3.2m
5.5m
7.1m
3.5m
7.1m
5.1m
5000 x 2800
2000 Kg
Roto Machines Ltd
Best Oven Efficiency
Our machine efficiency results
in big savings when compared
to the competition:
•
The Roto Machines
Aerodynamically designed oven
with closed loop control can
deliver 30% improvements in
cycle time and 50% energy
savings when compared with
other machines.
•
The Roto Machines
Rotomoulding machine is one of
the most efficient machines on
the market.
•
The Roto Machines
Aerodynamic oven re-circulates
the heat in a closed loop system
and uses less gas.
•
There is no extraction fan and
spent gas is vented by overpressure through a balanced
flue - this ensures that very little
heat is lost.
•
The Roto Machines Oven is
circular (not cubed like others),
with less volume to heat up and
a more efficient Aerodynamic
heat circulation (see sketch).
•
The Roto Machines Oven has
only one opening door. Heat is
retained in the back of the oven
during opening. Most other
Rotomachines have opening
doors each end of the oven
resulting in large loss of heat
when opened.
•
The cycle times are quicker
with the Roto Machines
machine – quicker operation,
less heat loss and less volume
to heat = quicker re-heat.
•
Robust design engineered for
continuous cycle use.
Roto Machines Ltd
Best Control System
No buttons or keyboard, just a large industrial 15” colour touch screen - it’s so easy to use!
Touch a flag to select the language.
Touch the option you want.
Animated graphics showing real-time machine
status.
Oven, Mould & Polymer temperature displayed
in real-time with automated process controls.
Drive balance indication for easy set up.
The Roto Machines control system
is one of the most advanced
systems available, featuring a fully
integrated modular system with
improved operator control and
facilities. It is easier to use, service
and maintain and allows for future
upgrades.
All the panels are mounted and
factory wired to motors and
instrumentation with plug and
socket wiring to the main control
panel for quick, easy assembly at
the customer’s factory.
•
Using the latest Industrial based
Mitsubishi Q series PLC and
operator touchscreen it provides
a very robust reliable operating
platform. There is no PC, no crashes,
no re-boots, just industrial PLC
process control reliability.
The system is designed as a
modular construction with plug
and socket wiring.
Communication is controlled by a
network BUS system significantly
reducing slip rings and wiring but
greatly improving the control
functionality. So all our control is via
a single 3 core cable – providing a
simple control solution with easy
fault finding & diagnostics.
The machine can be easily
configured for clockwise or anticlockwise direction. A complete
carriage can be easily removed and
re-connected via plug and socket.
Features Include:
• Latest Mitsubishi Q series PLC
with CC-Link BUS
Communications.
• Large industrial 15” colour touch
hard screen.
• Intuitive, easy to follow and
understand menu using
animated graphics to clearly
display real time machine status.
• Ethernet switch/hub for
Ethernet communications.
•
•
•
•
•
•
•
Data logging to compact flash
memory card and analogue
modem. This can also be
accessed by external
computer / laptop.
CC-Link BUS system makes it
possible to change all control
& inverter parameters via the
HMI touch screen.
Temperature Control option software included.
Air injection option with full
control and feedback via
network BUS system.
New carriage and arm
positioning system with control
and feedback through the
network BUS system.
Password protection for various
functions and levels of control.
Data acquisition & recipe control
via the HMI touch screen.
Manual overrides with
safety interlocks included in
the software.
Tel: +44 (0)1933 665361 • Email: sales@rotomachines.co.uk
Roto Machines Ltd
What do you want from your rotational moulding
machine?
•
•
•
•
•
•
Total reliability
Reduced fuel costs & lowest unit production costs
Fastest cycle times & increased output
Quality engineered machine using the latest
technology for consistent product quality
A control system that is easy to use, reliable
& expandable
Good service, support & back up
What options do you require for your process
needs?
•
•
•
•
•
•
•
•
3 arm or 4 arm carousel
Straight arm, drop arm or combination
Single cooler, double cooler, open air cooler,
water spray / mist cooling
Air injection – high and low pressure via automated
recipe control
Temperature monitoring with real time automated
process control.
Operator work platforms
Automated materials handling & dispensing systems
Double fill / single fill, recipe control options
data logging
Why should you choose Roto Machines Ltd?
•
•
•
•
•
•
•
Most energy efficient machine available. Less gas =
increased profit for you.
Quickest cycle time machine = increased output
Best control system. Easy to use, robust, reliable
Robust precision engineering = long term reliability
& minimal downtime
Innovative unique & clever design
First class service, support, maintenance & back up
Over 100 machines sold worldwide
Ask yourself this question:
With significant rising energy costs does it pay to buy
the cheapest?
Our Aerodynamic Oven Rotomachine gives up to 50%
energy savings and 30% reduction in cycle times giving
you a significant pay back on your initial capital
investment.
Find out more about what you can save from Roto
Machines now: www.rotomachines.co.uk
Roto Machines Ltd
World Class Excellence
Roto Machines Ltd have been
designing and manufacturing
rotational moulding machines for
over 20 years and have sold over
one hundred machines worldwide.
As a consequence we have gained
a global reputation for excellence in
this highly specialised industry.
Machines by Design
Since its formation, Roto Machines
Ltd have strived to build machines
of the highest quality, with the latest
technology and the most efficient
on the market. This goal is still at the
forefront of our engineering team
when every Roto Machines Ltd
machine is built. We have a
continuous programme of research
and development to maintain our
advantage and keep us at the
forefront of machine technology,
advances and improvements.
The Roto Machines Ltd Team
We have a team of highly skilled
engineers, with many years of
experience, responsible for the
design, build and installation of our
machines from start to finish.
We will install & commission the
machines and train your operators
to use them correctly, giving them a
clear understanding of all the latest
technology and features
incorporated into their machine.
Meeting Your Needs
No matter how large or complex
your process requirements, we
have the facilities and engineers
to match. From materials handling
through to custom machine build
and supply of machine moulds and
loading platforms, we have the
capability to produce the best
rotational moulding facility for
your needs.
Contact Roto Machines Ltd
Unit 10 & 11, Williams Way, Wollaston Industrial Estate, Wollaston, Northants. NN29 7RQ. England.
Tel: +44 (0)1933 665361 • Fax: +44 (0)1933 665053 • Email: sales@rotomachines.co.uk • Web:www.rotomachines.co.uk
Premier Engineers for Rotational Moulding
Rotomech Engineering Ltd are specialist
engineers to the Rotational Moulding
Industry, with over 40 years experience we
offer a comprehensive service to meet all
Rotational Moulding requirements.
At Rotomech Engineering we acknowledge that loss
of manufacturing through machine breakdowns can
be extremely costly in lost production and to
moulders who operate a just in time system to their
customers. We offer a machine breakdown service
to keep downtime to a minimum and enable
continued smooth running of the machinery, to
back this up Rotomech service all types and makes
of machines from a one off service to a full annual
planned maintenance schedule. After each service
Rotomech supply a complete report sheet
highlighting all faults from minor to major problems
with advisory notes and recommend any action to
be taken.
Rotomech have an experienced and skilled team of
engineers with the expertise and knowledge to
manufacture bespoke parts, from new drop arms,
straight arms and conversions of straight to drop
arms. Complete new ovens, cooling bays, carriages,
operator platforms safety gates and associated
equipment. We can also resite machines within
factories or relocate machines to new premises
and would project manage this to enable the
customer to concentrate on daily business. We are
proud in our machinery relocations and have
undertaken projects which have taken from one
week to a year start to finish.
Rotomech Engineering has a mould tool making
department in which we can design and draft a
concept drawing for any size or specification of
sheet steel tooling including any engravings or
inserts required. We can also supply the tooling
mounted ready for production and any cooling jigs /
finishing jigs. Rotomech manufacture and supply
the original MR range of mould clamps please see:
www.rotomech.co.uk for information.
Before refurbishment
After refurbishment
Tel: +44 (0)1933 665361 • Email: sales@rotomachines.co.uk
Materials Handling Systems for Rotational Moulding
STB Engineering Ltd are manufacturers of pneumatic conveying and bulk
materials handling systems with 40 years experience in materials handling
to the Plastics and Rotational Moulding Industries. We offer a specialist
materials handling system for accurately dispensing weighed amounts of
polymers into the actual mould prior to it entering the oven for processing.
An STB handling and dosing system can give significant benefits in factory
performance through increased production; reduction in material costs,
greater quality control, data logging and reduced labour & operating costs.
These systems alleviate the need for manual handling of material laden
drums to the oven area for manual tipping into the mould.
Materials are pneumatically conveyed from storage silos, FIBC stations,
pulverising system etc, to a weigh hopper which is located adjacent to the
oven moulding process. The weigh hopper provides an accurate ‘Loss-inWeight’ feed system into the mould via a specially designed STB swivel
screw assembly. An advanced control system allows the operator to select
the mould charge by weight or by selecting a recipe pre-stored in the
control system.
Silos for material storage
Weigh hopper
Mixing
Roto Machines Ltd
Rotomachine
Pulverising
Road tanker delivery
Tel: +44 (0)1933 665361 • Email: sales@rotomachines.co.uk