4 - Nicoll

Transcription

4 - Nicoll

RAINGUTTER
systemS
170
DRAINAGE FITTINGS
174-175
New products
182-185
Vodalis® raingutter 29 and downpipe 80 and 100 mm
186-193
Ovation® raingutter 28, 38 and downpipes 95 and 107 mm
194-201
Half-round raingutter 25, 33 and downpipes 80,100, 125 mm
202-216
Half-round raingutter 16 and downpipe 50 mm
218-221
Corniche square raIngutters Elite® 30 and downpipes 80,100, 73 x 100 mm 230-235
roofING accessories
236-243
Decision-making guide
238-239
Roof vents
241
Access trap doors
241
Eaves fillers combs
241
Rainwater collectors
242
Rainwater accessories
242
Ventilation
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
MetalLIC gutter accessories
BUILDING
222-228
All our documents can be downloaded free
of charge from: www.nicoll.fr
171
SAUL
Decision-making guide
FASCIA
AND ROOFING
SOFFIT BOARD
ACCES
TRAP DOOR
181-228 HYDRAULIC
DRAINAGE CHANNELS
ENVIRONMENT
SOLVENT WELD OR RUBBERS GASKET RAINGUTTER SYSTEMs
ROOFING
ACCESSORIES
RAINGUTTERS
GLUE
SANITARY
SANITARY
RAINGUTTER SYSTEMs
EUROPEAN STANDARDS
RAINGUTTERS
European standard NF – EN 607,
for gutter profiles and fittings.
1. Shock testing at 0°C for one hour to test resistance in
cold conditions (hail, pressure of a ladder).
2. Warm and cold cycle testing, 100°C for 30’ then cooled
to ambient temperature.
No distortion or surface alteration detected in the
Nicoll raingutter system.
3. Resistance to ageing: gutter exposed for 1600 hours to
ultraviolet radiation and rain/evaporation cycles.
After testing, the Nicoll raingutter system showed
no discolouration and their shock resistance was
unchanged.
4. Seal: five 15’ cycles with hot water at 50°C followed by 10’ with cold water at 15°C.
No leaking detected in the Nicoll raingutter system.
5. Resistance to corrosion from pollution and acids.
European standard NF – EN 1462,
for gutter hooks (PVC or metal).
1. UV resistance for PVC the same as for gutter standard
NF-EN 607.
2. Corrosion resistance: - Class A for use in a harsh atmosphere,
- Class B for use in milder atmospheric conditions.
The Nicoll raingutter system facing and concealed
brackets are in class A.
3. Load resistance: - Class H for heavy-duty brackets, test load 750N,
- Class L for light brackets, test load 500N,
- Class O with an opening width of less than 80mm
(e.g. LG16).
Catalog
4
The Nicoll raingutter system concealed brackets are in class H.
172
DRAINAGE FITTINGS
ml
%
THE SOLVENT WELD GUTTER
VODALIS ®
ELITE®
LG38
LG29
LG30
LG28
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
On tiled roof
ø 80
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RAINGUTTERS
•
•
•
CHOICE OF ATTACHMENT
•
•
•
•
On corrugated roof
•
•
•
•
•
•
•
•
•
•
•
•
LG33
•
•
•
•
•
•
•
•
•
RUBBER GASKET GUTTER
•
•
•
•
•
•
•
•
Fascia
Invisible
On rafter
HALF-ROUND
LG25
•
•
•
•
•
•
•
•
•
90x56
•
•
•
•
•
•
•
•
•
CHOICE OF DOWNPIPE
ø 100 105x76
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ø 80
ø 100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ø 80
•
•
73x100
ø 50
ø 80
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
90x56
ø 100
ø 125
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Other: send your plan
or diagram to the
Export Department
or your dealer.
e.mail: export.nicoll@aliaxis.com
Fax: +33 (0)2 41 63 73 57
Tel.: +33 (0)2 41 63 73 83
173
ENVIRONMENT
Grey
White
Sand
Brown
Dark grey
Red
Black
Green
Copper
•
•
•
LG16
Ventilation
lm
lm
lm
lm
lm
lm
OVATION ®
Grey
White
Sand
Brown
Dark grey
Red
Black
Green
Copper
Grey
White
Sand
Brown
Dark grey
Red
Black
Green
Copper
Size A =
Size B =
Size C =
Size A =
Size D =
Special angle =
lm
SAUL
Truss or rafters centre distance
X=
Roof framework overhang
L=
Height
H=
Pitch =
COLOUR
Plan types
Roof dimensions
FASCIA
AND ROOFING
SOFFIT BOARD
Your dimensions
ACCES
TRAP DOOR
Plan type
reference
ROOFING
ACCESSORIES
3 Send a photocopy of this duly completed page to
the NICOLL Technical Department (contact details
at the bottom of the page).
%
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
pe
slo
2 Tick the corresponding boxes for the options you
have selected (colour, rainwater downpipe, etc.) in
the tables below.
HYDRAULIC
DRAINAGE CHANNELS
1 Specify the roof size of your building, (house or
apartment block) after having selected the type of
plan opposite: 1, 2, 3, etc.
Description of your project
SANITARY
GLUE
SANITARY
(0)2 41 63 73 57
BUILDING
BY fax +33
raingutter systems
decision-making guide
RAINGUTTERS
There’s a gutter for every project.
Nicoll offers a wide range of gutter systems. Their various designs and
technical characteristics make them match with all types of installation.
TYPE of
TECHNICAL REQUIREMENTS
raingutter FOR YOUR PROJECT
shape
LG16 half-round
for small roofs
LG25 half-round
traditionnal raingutter
LG33 half-round
for big roofs
measurements
assembly
Sand
Rubber
gasket /
Solvent weld
Ovation® LG28
design reinvented
Rubber
gasket /
Solvent weld
Brown
White
Rubber
gasket /
Solvent weld
Rubber
gasket /
Solvent weld
colours
Grey
Rubber
gasket
Vodalis® LG29
small details that make a big
difference
hydraulics
Grey
Brown
Green*
White
Red
Copper*
Sand
Black
Dark grey
Grey
Brown*
White*
Sand
6
140
81
147
Brown
White
Red
Copper
Sand
Black
Dark grey
Brown
Green
White
Red
Copper
Sand
Black
Dark grey
Brown
Ovation® LG38
design reinvented
Solvent weld
White
Red
Sand
Black
Brown
Elite LG30
square edge gutter
White
Sand
4
Catalog
Solvent weld
* Solvent weld system only
174
White
Red
Copper
RAL 8007*
Black
Dark grey
RAL 9011*
RAL 7016*
* Closest matching RAL products.
block of
flats
industrial
buildings
farm and
agricultural
building
Pages
LG16 half-round
p. 220
LG25 half-round
p. 206
Ventilation
villas
small block
of flats
FASCIA
AND ROOFING
SOFFIT BOARD
suburban
houses
BUILDING
detached or
semi detached
house
LG33 half-round
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
p. 208
Vodalis® LG29
p. 190
Ovation® LG28
p. 198
Ovation® LG38
p. 200
Elite LG30
p. 224
175
ENVIRONMENT
Garden
sheds
ROOFING
ACCESSORIES
used for:
SAUL
Sand
RAL 1015*
RAL 3004*
ACCES
TRAP DOOR
RAL 9010*
With a large variety of
colours, Nicoll raingutter
system fits in all style of
housings.
RAINGUTTERS
RAL 6005*
SANITARY
DRAINAGE FITTINGS
Green
RAL 8017*
HYDRAULIC
DRAINAGE CHANNELS
Brown
GLUE
SANITARY
Grey
RAL 7047*
FABRICATION
Manufacturing process RAINGUTTERS
The co-extrusion manufacturing process forms a durable
protective screen which guarantees excellent colourfastness on the external part and optimal UV resistance,
thereby preventing excessive internal expansion of the
profile due to heat.
TECHNICAL ASSESSMENT
The LG25 gutter associated with the Belriv system is certified,
on the basis of regular inspections, by the French building
engineering centre (CSTB) under technical recommendation
no. 14+5/10-1588, offering additional peace of mind in
terms of safety for the user.
HAIL TEST
To prove the high mechanical resistance of its guttering
systems, Nicoll has worked in close collaboration with the
CSTB building engineering centre (France).
DID YOU KNOW ?
The ranges of tests designed to reproduce once-in-adecade hailstorm conditions proved the high resistance of
the Nicoll systems which have been certified by the CSTB.
THE NICOLL EXTRA
DID YOU KNOW ?
Co-extrusion
The inside surface is partly
made of recycled PVC. The
outside surface is perfect
because it is made of virgin
PVC with a high concentration
of pigments developed to
withstand ultra-violet rays.
Catalog
4
Marking
All the profiles and accessories
are marked so that they can be
easily identified.
176
The test conducted by the CSTB consists of reproducing
the effects of a high intensity hail storm. This type of storm
occurs, on average, every 10 years in France.
• Ø of hailstone = 25 mm
• Terminal velocity at impact = 25 m/s
• Duration = 7 minutes
The test exerts significant stress on the product as it is subjected to a continuous shower of hailstones for three 7-minute periods. These tests are carried out by an engineer from
the CSTB at the CSTB’s facility.
The results of the tests have been catalogued in two reports
from the CSTB: EN-CAPE 09.151 C V0 et
EN-CAPE 09.152 C V0.
the videos of these tests can be viewed
www.ovation-nicoll.com
SELECTION
PRO
www.vodalis-nicoll.com
DRAINAGE FITTINGS
GLUE
SANITARY
SANITARY
technical assistance
Technical support for designing your projects RAINGUTTERS
A direct number is available for general technical support,
for help with designing a particular project or for follow-up.
The plans required for project preparation and pricing can
be sent by e-mail, fax or courier.
Ventilation
SAUL
177
ENVIRONMENT
Export department
Phone : +33 (0)2 41 63 73 83
Fax : +33 (0)2 41 63 73 57
e-mail : export.nicoll@aliaxis.com
HYDRAULIC
DRAINAGE CHANNELS
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Would you need a solution to a specific problem with a
project that requires a unique or limited series special
component to be made our team of experts can design and
produce special components just for you. The strength of
our manufacturing plant can also adapt and be flexible: a
dedicated department can manufacture your customized
items on request.
ACCES
TRAP DOOR
Made-to-measure parts:
a design and production service !
BUILDING
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
Export department
Phone. : +33 (0)2 41 63 73 83
Fax : +33 (0)2 41 63 73 57
e-mail : export.nicoll@aliaxis.com
CUstom-made parts
RAINGUTTERS
Custom-made parts at your service
Site techNIcal studies and
custom-made parts
Nicoll has a team of experts to handle your site studies and for
special orders of customized parts or limited series. This means
you will be supported by all the force and response of the Nicoll
industrial system to steer you through even the most difficult sites.
Tel. +33 (0)2 41 63 73 83 Fax +33 (0)2 41 63 73 57
E.mail: export.nicoll@aliaxis.com
Narrow 90° Y-branch
The Nicoll custom-made parts department
can make all types of branches for downpipes
with any angle or outlet Ø.
Special stopends
For facades with particular angles, Nicoll can
manufacture special stop ends for a better
aesthetic.
Angle outlet
For draining rainwater on a corner, Nicoll can
make angle outlets specially for your needs.
Custom angles
Catalog
4
In addition to the Nicoll range, you can order
any type of angle you require from the Nicoll
custom-made parts department.
178
DRAINAGE FITTINGS
SANITARY
SANITARY
special angles
ROOFING
ACCESSORIES
RAINGUTTERS
GLUE
For projects that require custom components,
our teams are wailable to discuss the technical
requirements of your project, the ground angle, roof
slope, etc.
W
AI
T
RE
C
TI
O
N
STRAIGHT HORIZONTAL
BUILDING
LEFT HORIZONTAL
N
DI
T
AI
W
N
W
FT
DO
LE
N
O
TI
C
RE
DI
W
STRAIGHT HORIZONTAL
ACCES
TRAP DOOR
DO
W
W
FLOW DIRECTION
T
O
LEFT HORIZONTAL
FLOW DIRECTION
H
LEFT DOWNWAIT
G
FL
RIGHT DOWNWAIT
RI
FASCIA
AND ROOFING
SOFFIT BOARD
Please provide details with the data of the angles in all directions
LEFT EYWARD
Ventilation
O
FL
RI
EY
LEFT HORIZONTAL
LE
EY
W
AR
D
FLOW DIRECTION
STRAIGHT HORIZONTAL
Phone: +33 (0)2 41 63 73 83 Fax +33 (0)2 41 63 73 57
E.mail: export.nicoll@aliaxis.com
179
ENVIRONMENT
FT
SAUL
H
G
LEFT HORIZONTAL
T
HYDRAULIC
DRAINAGE CHANNELS
RIGHT EYWARD
D
AR
W
FLOW DIRECTION
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
STRAIGHT HORIZONTAL
packing & PackAGing
RAINGUTTERS
Raingutters
packing
PackAGing
The letter indicates the type of Packing:
S: Bag F: Film
K: Shell C: Cardboard
B: Box
A number indicates the number of parts included per
delivery.
followed by a number indicating the number of items
in the package.
Example: Rainwater collector REP80 is
supplied in a single box, hence the code B1.
Example: The galvanized twisted bracket 1HCC25 is
delivered in cardboard containing 50 bags, hence the
number 50.
REFERENCE
1HCC25
PACKing Packaging
S1
50
The Packing or packaging quantities indicated in grey must be followed (minimum or
multiple) in order to avoid additional unpacking costs.
Catalog
4
(If no grey reference, no minimum requirement).
180
181
SAUL
HYDRAULIC
DRAINAGE CHANNELS
ENVIRONMENT
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Ventilation
ACCES
TRAP DOOR
BUILDING
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
RAINGUTTERS
solvent-weld or rubber
Sgasket raingutter
systemS
GLUE
SANITARY
SANITARY
DRAINAGE FITTINGS
COLOUR VISION
by Nicoll
8 COLOURS SUITABLE FOR ALL STYLES OF ARCHITECTURE
RAINGUTTERS
Slate blue, brick Red, granite grey, the orange of tiles, the sandy colours
of plaster, the green of a garden.... from North to South houses take
on varied architectures and colours, an endless source of inspiration
brought to life by Nicoll with a range of coloured gutters with very specific
designs.
Thanks to Nicoll tradition and modernity can live together freely, and
modern houses can finally find gutters which will enhance their clean
lines and their style.
AN INFINITE VARIETY OF BEAUTIFUL
COLOURS!
The sparkling colours of Nicoll gutters are guaranteed over time, due
to the exclusive co-extrusion technique for which Nicoll is one of the
forerunners. Products are also subjected to many tests to ensure that
their colours will never change even when heavily exposed to sunlight.
Resistance to UV – Standard NF-EN607 test:
WHITE
010*
RAL 9
5*
AL 101
SAND R
Brown
L
RED RA
017*
RAL 8
3004*
016*
AL 7
grey R
k
r
a
D
The gutter is exposed to ultraviolet rays for 1600 hours and to rain/
evaporation cycles. After the test the colours remain unchanged and
shock resistance has not diminished.
GREEN
005*
RAL 6
8007*
RAL
Copper
Black
* The closest RAL references
4
Catalog
011*
RAL 9
182
DRAINAGE FITTINGS
Nicoll is innovating and has developed, in keeping with its style line fo gutters, a
new, elegant, reinforced bottom downpipe increasing hydraulic capacity.
BUILDING
When combined with the Nicoll gutter downpipe system, the new reinforced
bottom downpipe, complements your structure.
design, understated and stylish
resistant to shocks (foot and ball hits,
garden tools, etc.)
hydraulic capacity
Resistance
No
to UV radiation, ageing
corrosion
be adapted to all Nicoll gutter systems
fitted with Ø 80 or Ø 100 downpipes.
Materials
and colours perfectly match the
downpipe and raingutter
183
ENVIRONMENT
Can
SAUL
Excellent
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Highly
HYDRAULIC
DRAINAGE CHANNELS
Modern
Ventilation
ADvantages:
ACCES
TRAP DOOR
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
RAINGUTTERS
GLUE
SANITARY
NEW
Building
SANITARY
Stylish, next-generation reinforced bottom
downpipes for gutter system
Rainwater hopper
New
RAINGUTTERS
Flat roof rainwater drainage
Flat roof designs are being increasingly used in both detached and multi-unit
houses. To cater for such applications, Nicoll has developed a new generation of
patented rainwater hoppers with enhanced drainage performance.
ADVANTAGES:
Optimal
drainage performance
The interior of the Nicoll rainwater hopper has been
specially designed to maximize the rate of drainage.
Built-in
safety overflow outlet The Nicoll rainwater hopper has 3 openings for water
pass-through, thereby limiting the risk of blocage.
Contemporary
design
Catalog
4
The dimensions of the Nicoll rainwater hopper, its
cubic, uncluttered design and its range of 6 colours
ensures perfect integration with contemporary flat
roof structures.
184
DRAINAGE FITTINGS
SANITARY
New
with integrated socket do not require
the use of pre-socketed pipes.
clamps allow for quick, easy and invisible
fastening via a rear snap-fit.
185
ENVIRONMENT
drop pipe foot provides optimal flow.
SAUL
The
HYDRAULIC
DRAINAGE CHANNELS
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Elbows
The
ACCES
TRAP DOOR
Ventilation
ADVANTAGES:
BUILDING
Nicoll is innovating and developping new downpipe accessories by providing
aesthetic, practical and technological details.
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
RAINGUTTERS
GLUE
New aesthetic downpipe accessories
SANITARY
Raingutter
VODALIS®
LG29
RAINGUTTERS
Small details that make a big difference
The Vodalis® gutter system offers a multitude of aesthetical, practical and
technical details that really make a difference. It offers a perfect compromise
between the 25 and 33 half-round profiles for use in both multi-unit and detached
houses.
ADVANTAGES
Frost and heat resistance (from -40° to +60°).
UV resistance.
Ice and hail resistance (test C.S.T.B.).
Brackets are designed to resist over the specification
limits.
High hydraulic capacity with a 140mm single opening
size and D.80 and D.100 downpipes.
Traditional reinvented design awarded by the French
Design Institute.
Anti-leaking and anti-dirtying profile (patented system).
100 % recyclable.
10-years guarantee.
SPECIFICATION GUIDELINES
The gutter will be PVC from Nicoll’s Vodalis® 29 range providing coverage for 65 and 100 m2 of flat
roof per outlet or similar. It will use a solvent welding assembly system and its dimensions must comply
with the sizing rules for gutters and downpipes specified in the NFP 30.201, NFP 36.410 and NF EN
1462 standards and the French Building regulations DTU 60.11. It must be fitted in accordance with the
specification criteria and those defined by the French Building regulations DTU 60.2 - 60.11 and the NFP
36.410 standard.
Product data sheets for Nicoll gutters can be obtained from our export sales department
(export.nicoll@aliaxis.com).
GLUE
Gutter profile
Downpipe
Used for
Detached or semi-detached houses, block of flats or smal flats
Characteristic
Design and performance
RAINGUTTERS
Vodalis®
RéSEAUX DE
SANITAIRE
DISTRIBUTION
éVACUATION
SANITARY
DRAINAGE
FITTINGS
SANITARY
technical characteristics
Ø 100
Solvent weld or rubber gasket
6
140
81
Ø 80
Ø 100
FASCIA
AND ROOFING
SOFFIT BOARD
147
Hydraulic capacity
Material
Profile
½ round developed to 29
Round ø 80 and ø 100
Section
90 cm²
Ø 80 = 46,6 cm²
Ø 100 = 73,9 cm²
Sand
Brown Dark grey
Red
Black
Copper
115 mm
140 mm
LG33
170 mm
Anti-dirtying device:
Thanks to the spoiler, water is drained
but not alongside the gutter profile.
187
ENVIRONMENT
The Nicoll extra
SAUL
VODALIS®
HYDRAULIC
DRAINAGE CHANNELS
LG25
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Ventilation
White
BUILDING
Ø 80 = 65 m2
Ø 100 = 100 m2
Flat roof area served by an outlet
Colours
Ø 80
Polyvinyl chloride
Polyvinyl chloride
ACCES
TRAP DOOR
Assembly
Measurements
ROOFING
ACCESSORIES
Shape
VODALIS®
Gutter profile
10
1
9
11
3
RAINGUTTERS
2
6
7
8
5
4
Bracket
Vodalis® brackets are available in 2 types to match with all architectural styles.
The invisible bracket gives a smoother look to the design while the fascia
bracket maintains the traditional appearance.
Nicoll Vodalis brackets comply with the EN 1462 standard. This standard
requires each bracket to be able to withstand a load of 75 kg, whereas Nicoll’s
can withstand a 100 kg load.
Outlet
High hydraulic capacity with 2 pipes Ø 80-100.
Use in extreme weather conditions.
Expansion junction
Catalog
4
Vodalis expansion junction can withstand severe service conditions: from
-40° to +60°.
188
éVACUATION
DRAINAGE
FITTINGS
Aesthetic
bends
RAINGUTTERS
GLUE
Do not need chamfers
to be connected, which
participates in the aesthetic
qualities of the system.
SANITARY
SANITARY
VODALIS®
Downpipe
ROOFING
ACCESSORIES
Bracket
Easy, quick, invisible and
safe fixation clip.
12
Ventilation
18
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
16
17
Rainwater shoe
With its revamped design,
the Vodalis rainwater shoe
provides optimal flow while
ensuring clean drainage.
189
ENVIRONMENT
19
SAUL
15
ACCES
TRAP DOOR
The Nicoll leaf trap filters
out leaves and other debris
in the downpipe for easy
cleaning. Simple to twist
open or closed, it is hardly
noticeable as it bends with
the gutter downpipe.
13
HYDRAULIC
DRAINAGE CHANNELS
Leaf trap
BUILDING
FASCIA
AND ROOFING
SOFFIT BOARD
14
RAINGUTTER SYSTEMS
Vodalis® raingutter system "LG29"
REF.
White
REF.
Sand
REF.
Brown
REF.
Dark grey
REF.
Red
REF.
Black
REF.
Copper
Packing Packaging
GUTTER PROFILE
1
Length 4 m
LG29B*
LG29S*
LG29M*
LG29A*
LG29R*
LG29N*
LG29C*
Pack of 8
lengths (32 m)
Length 2 m
LG292B*
LG292S* LG292M*
LG292A*
LG292R*
LG292N*
LG292C*
Pack of 8
lengths (16 m)
NAD29N
* Packaged in a polyethylene sleeve in 8 Lengths.
RAINGUTTERS
SOLVENT WELD GUTTER FITTINGS
2
Central expansion outlet Ø 80
NAD29B
NAD29M
NAD29A
NAD29R
NAD29C
5
3
Central expansion outlet Ø 100
NADT29B NADT29S NADT29M
o
NADT29A
NADT29R NADT29N NADT29C
5
NAD29S
Leafguard for rainwater outlet S
4
90° internal angle
5
90° external anle
135° internal angle
135° external angle
CRAP
O
L AIC29B AIC29S
V
E AEC29S AEC29S
e
N
T AIC295B AIC295S
C10
AIC29M
AIC29A
AIC29R
AIC29N
AIC29C
C5
AEC29M
AEC29A
AEC29R
AEC29N
AEC29C
C5
AIC295N
AIC295C
AIC295M
AIC295A
AIC295R
AEC295B AEC295S AEC295M
AEC295A
AEC295R AEC295N AEC295C
W
E
L JNC29B
D JND29B
6
Union part
7
Union part
8
Left gutter stopend
FG29B
FG29S
FG29M
FG29A
FG29R
FG29N
FG29C
S10
9
Right gutter stopend
FD29B
FD29S
FD29M
FD29A
FD29R
FD29N
FD29C
S10
JNC29S
JNC29M
JNC29A
JNC29R
JNC29N
JNC29C
10
JND29S
JND29M
JND29A
JND29R
JND29N
JND29C
5
RUBBER GASKET FITTINGS
Gutter union part
90° internal angle
90° external angle
135° internal angle
135° external angle
Left gutter stopend
R JNJ29B
U
B
B AIJ29B
E AEJ29B
R
AIJ295B
JNJ29S
JNJ29M
JNJ29A
JNJ29R
JNJ29C
AIJ29S
AIJ29M
AIJ29A
AIJ29R
AIJ29C
AEJ29B
AEJ29M
AEJ29A
AEJ29R
AEJ29C
AIJ295S
AIJ295M
G
A AEJ295B AEJ295B AEJ295M
S
K FGJ29B FGJ29S FGJ29M
E
FDJ29B FDJ29S FDJ29M
T
AIJ295A
AIJ259R
AIJ295C
AEJ295A
AEJ295R
AEJ295C
FGJ29A
FGJ29R
FGJ29C
FDJ29A
FDJ29R
FDJ29C
GUTTER BRACKETS
10 Bracket fascia
11 Invisible internal bracket
DID YOU KNOW ?
GB29PB
GB29PM
GB29PA
GB29PR
GB29PC
50
BHGB29B BHGB29S BHGB29M
GB29PS
BHGB29A
BHGB29R BHGB29N BHGB29C
50
Metal fixing accessories for front attachment of the Vodalis bracket
VI645ET
Cutting template
GAB29
GB29PN
THE NICOLL EXTRA
Hail test:
High mechanical strength
• To prove the high mechanical resistance of its guttering systems, Nicoll
The Vodalis® brackets can withstand a load of 100 kgs. They
comply with the European 1462
standard which imposes a loading
requirement of 75 kg.
has worked in close collaboration with the CSTB building engineering
centre (France). The ranges of tests canied out to reproduce an-in-adecade hailstorm conditions proved the high resistance of the Nicoll systems which have been certified by the CSTB.
Catalog
4
•Find our hail test movie on: www.vodalis-nicoll.com
190
DRAINAGE FITTINGS
Packing Packaging
SHANKS
SANITARY
REF.
SANITARY
Vodalis® metal gutter accessories
Galvanized
HCC25*
Length on rafter 225 mm, length developed 335 mm
HCL25*
50
HCL50*
50
Galvanized twisted shank 225 mm
HCH25*
50
GLUE
C50
HCH25
1HCC25*
S1
50
Galvanized 335 mm - Bag of 1 piece with included screw
1HCL25*
S1
50
Twisted - Bag of 1 piece with included screw
1HCH25*
S1
50
Galvanized 235 mm - Bag of 1 piece with included screw
1HCC25
1HCH25
RAINGUTTERS
Shanks in bag
EFC70G*
50
Galvanized stirrup to be struck for corrugated iron roof
EBA70G*
50
EOALI*
50
EOGCT*
50
Galvanized tile bracket
CT*
50
Galvanized metal accessories for fascia brackets of halfround gutter 25, 33 and 29
CG*
50
EOGCT Galvanized for corrugated roofing sheets
CT
CG
C50
Galvanized stirrup to be struck for fiber cement roof
Alligator bracket
EOALI
KEO
FASCIA
AND ROOFING
SOFFIT BOARD
Adjustable piece for galvanized stirrup EO70G for thin
roofing
50
BUILDING
KEO
NEW !
EO70G
EO70G*
ROOFING
ACCESSORIES
STIRRUP
Galvanized to be screwed for any kind of roof
ACCES
TRAP DOOR
HCL25
50
EBA70G
To be struck fiber cement roof - bag of 1 piece
1EFC70G*
S1
50
To be struck corrugated iron roof - bag of 1 piece
1EBA70G*
S1
50
BRACKET
Snow
CP
CP*
Nail bracke
50
* Supplied with VI6ETR for plastic fascia bracket.
Our plate and stirrup come with all necessary fastenings.
THE NICOLL EXTRA
Corrosion-resistant guarantee
Nicoll’s metal accessories are hot-dip galvanized in accordance with the
EN1461 standard (min thickness of 55 microns).
This makes them suitable for use in severe conditions (coastal areas or
industry) and guarantee a minimum lifespan of 10 years.
191
ENVIRONMENT
NEW !
EFC70G
SAUL
50
S1
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
S1
To screw for all type of roof - bag of 1 piece
HYDRAULIC
DRAINAGE CHANNELS
1CT*
1EO70G*
For tile - bag of 1 piece
Ventilation
Galvanized stirrup in bag
RAINGUTTER SYSTEMS
Downpipe ø 80 and ø 100 - Aesthetic serie
REF.
White
REF.
Sand
REF.
Brown
REF.
Red
REF.
Black
REF.
Copper
Packing Packaging
TD80R*
TD80N*
TD80C*
Pack of
10 lengths
(40 m)
REF.
Dark grey
DOWNPIPE Ø 80 and Ø 100
12
TD80B*
TD80S*
Length 2 m Ø 80
TD802B*
TD802S* TD802M* TD802A* TD802R* TD802N* TD802C*
Pack of
10 length
(20 m)
Length 4 m Ø 100
TD100B*
TD100S* TD100M* TD100A* TD100R* TD100N* TD100c*
Pack of
5 lengths
(20 m)
RAINGUTTERS
Length 4 m Ø 80
TD80M*
TD80A*
*Packaged in a polyethylene sleeve in 10 lengths.
DOWNPIPE FITTINGS Ø 80 and Ø 100
13
14
67°30 Single socket branch
BR16GT1B BR16GT1S BR16GT1M BR16GT1A BR16GT1R BR16GT1N BR16GT1C
Ø 80
10
67°30 Single socket branch
BT16GT1B BT16GT1S BT16GT1M BT16GT1A BT16GT1R BT16GT1N BT16GT1C
Ø 100
10
45° Single socket bend
Ø 80
CR4GT1B
CR4GT1S
CR4GT1M
CR4GT1A
CR4GT1R
CR4GT1N
CR4GT1C
10
45° Single socket bend
Ø 100
CT4GT1B
CT4GT1S
CT4GT1M
CT4GT1A
CT4GT1R
CT4GT1N
CT4GT1C
10
67°30 Single socket bend
Ø 80
CR6GT1B
CR6GT1S
CR6GT1M
CR6GT1A
CR6GT1R
CR6GT1N
CR6GT1C
10
Ø 100
CT6GT1B
CT6GT1S
CT6GT1M
CT6GT1A
CT6GT1R
CT6GT1N
CT6GT1C
10
Ø 80
CR8GT1B
CR8GT1S
CR8GT1M
CR8GT1A
CR8GT1R
CR8GT1N
CR8GT1C
10
Ø 100
CT8GT1B
CT8GT1S
CT8GT1M
CT8GT1A
CT8GT1R
CT8GT1N
CT8GT1C
10
JRGTB
JRGTS
JRGTM
JRGTA
JRGTR
JRGTN
JRGTC
10
JTGTS
JTGTM
JTGTA
JTGTR
JTGTN
JTGTC
10
ZTGTA
ZTGTR
ZTGTN
RE338R
RE338N
15 Double socket pipe connector
Ø 80
Double socket pipe connector
Ø 100
JTGTB
Single socket coupling
ZTGTB
ZTGTS
ZTGTM
RE338GTB
RE338S
RE338M
Downpipe outlet Ø 80
JAM80B
JAM80S
JAM80M
JAM80A
JAM80R
JAM80N
JAM100B
JAM100S JAM100M JAM100A
JAM100R
JAM100N
5
Rainwater hopper Ø 80
BAO80B
BAO80S
BAO80M
BAO80A
BAO80R
BAO80N
6
BAO100B
BAO100S
BAO100M
BAO100A
BAO100R
BAO100N
6
Catalog
4
NEW !
Concentric Reducer 100/80
192
10
C10
JAM80C
5
DRAINAGE FITTINGS
REF.
Red
REF.
Black
REF.
Copper
PAF801A
PAF801R
PAF801N
1PAF801C
S1
Ø 80
REPTD80B REPTD80S REPTD80M REPTD80A REPTD80R REPTD80N REPTD80C
B1
Ø 100 Shaped piece
REPTD100B REPTD100S REPTD100M REPTD100A REPTD100N
B1
REF.
Sand
REF.
Brown
Packing Packaging
LEAF TRAP Ø 80
16 Leaf trap Ø 80
PAF801S
PAF801M
5
GLUE
PAF801B
SANITARY
REF.
Dark grey
REF.
White
SANITARY
Downpipe ø 80 and ø 100 - Aesthetic serie
For Ø100, contact us
RAINWATER COLLECTOR
RAINGUTTERS
NEW !
New generation of rainwater collector for Ø 80 et Ø 100 downpipe (26 x 34 fitting)
DDF10RS
DDF10R1A
5
With bend - 1 m Ø 80
DCF10RB
DCF10RS
DCF10R1A
5
Straight - 1 m Ø 100
DDF10TB
DDF10TS
DDF10T1A
5
DCF10TB
DCF10TS
DCF10T1A
5
ROOFING
ACCESSORIES
DDF10RB
FASCIA
AND ROOFING
SOFFIT BOARD
17
Clip bracket Ø 80
CORGT1B
CORGT1S
CORGT1M
CORGT1A
CORGT1R
CORGT1N
CORGT1C
S10
Clip bracket Ø 100
COTGT1B
COTGT1S
COTGT1M
COTGT1A
COTGT1R
COTGT1N
COTGT1C
S10
Clip bracket Ø 80 without nut
CORGT1SIB CORGT1SIS CORGT1SIM CORGT1SIA CORGT1SIR CORGT1SIN CORGT1SIC
S10
COTGT1SIB COTGT1SIS COTGT1SIM COTGT1SIA COTGT1SIR COTGT1SIN COTGT1SIC
S10
Ventilation
18
BUILDING
DOWNPIPE BRACKET Ø 80 and Ø 100
ACCES
TRAP DOOR
Straight - 1 m Ø. 80
10
RWS1001B RWS1001S RWS1001M RWS1001A RWS1001R RWS1001N RWS1001C
10
193
SAUL
Rainwater shoe Ø 100
RWS801B RWS801S RWS801M RWS801A RWS801R RWS801N RWS801C
HYDRAULIC
DRAINAGE CHANNELS
19 Rainwater shoe Ø 80
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
RAINWATER SHOE Ø 80 et Ø 100
ENVIRONMENT
NEW !
REINFORCED BOTTOM DOWNPIPE Ø 80 and Ø 100
OVATION®
LG28 AND LG38
RAINGUTTERS
Gutter systems which change
the way you think about gutters.
The Ovation® gutter system is designed to be discreet and elegant. It is
technically innovative with excellent hydraulic capacity and easy to fit.
ADVANTAGES
• 2 versions with cutting-edge design (LG28 and LG38).
• Good looks and innovation.
• Excellent hydraulic capacity.
• Precise, time-saving and easy to fit.
• Hardwearing.
• Available in a range of 8 different colours.
3
Tarif - Catalogue
• Outstanding new technical qualities!
194
DRAINAGE FITTINGS
GLUE
Detached, semi-detached houses, Small blocks of flats
Cutting-edge design
Shape
Solvent welding or rubber gasket
Ø 80
90 x 56
Budget
Material
Profile
Section
ee
Elliptical : 90 x 56
39.7 cm²
90 x 56 (Section: 39.7 cm2) = 92 m²
Ø 80 = 92 m²
Ovation® LG38
White
Sand
Brown
Red
Black Green Dark grey Copper
Gutter profile
Ventilation
Moulded
75.4 cm²
BUILDING
Polyvinyl chloride
Colours
FASCIA
AND ROOFING
SOFFIT BOARD
Hydraulics
Downpipe
Used for
Houses, Small blocks of flats, Villas, Industrial buildings
Characteristic
Cutting-edge design
Shape
Assembly
Solvent welding
Measurements
Ø 100
105 x 76
Hydraulics
eee
Polyvinyl chloride
Moulded
66.3 cm²
105 x 76 (Section: 66.3 cm ) = 141 m²
Ø 100 = 141 m²
2
Colours
Elliptical: 105 x 76
138.34 cm²
White
Sand
Brown
Red
Black
195
ENVIRONMENT
Budget
Material
Profile
Section
SAUL
Measurements
ACCES
TRAP DOOR
Assembly
ROOFING
ACCESSORIES
RAINGUTTERS
Downpipe
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Used for
Characteristic
Gutter profile
HYDRAULIC
DRAINAGE CHANNELS
Ovation® LG28
SANITARY
SANITARY
TECHNICAL FEATURES
OVATION® LG28 AND LG38
Gutter profile
5
RAINGUTTERS
12
14
10
11
3
2
7
8
1
9
4
6
12
Bracket
Outlets
Expansion piece
The
Ovation ®
system
has
completely concealed brackets
to enhance its discretion. They
are reinforced at the back to
prevent them coming unclipped
and enhance their mechanical
resistance.
The new outlet with anti-splash
ribs allows the LG28 to service
flat roofs of up to 65 m2 and the
LG38 to service flat roofs of up
to 100 m2.
This part enhances the system’s
performance, particularly on 4-slope
roofs typical in some regions.
4
The gutter is easier to fit because
it is simply engaged on the nose
and then tipped to clip it on the
heel.
Catalog
11
196
Co-extrusion
The inside surface is partly
made of recycled PVC. The
outside surface is perfect
because it is made of new
PVC with a concentration of
pigments developed to resist
ultra-violet rays.
Marking
All the profile and coupling parts are
marked so they are easy to identify
for making extensions.
20
DRAINAGE FITTINGS
GLUE
THE NICOLL EXTRA
Downpipe clip
This has a discreet rear fastening to
keep the design smooth.
RAINGUTTERS
It is clipped by hand and unclipped
with a screwdriver.
Patented
design.
18 17
SANITARY
SANITARY
OVATION® LG28 AND LG38
Downpipe DID YOU KNOW ?
ROOFING
ACCESSORIES
16 15
19
Ventilation
14
The universal shoe is a versatile
complementary part which fits to
the following diameters: 90, 100,
110, and 125 for LG38 and 75,
80, 90 and 100 for LG28.
22
downpipe
DID YOU
?
An indispensable
part to KNOW
protect
24
downpipes on houses and
blocks of flats (supplied with a
non-glued outlet).
THE NICOLL EXTRA
• Nicoll gutters comply with
European standards NF EN 607
(gutter profiles and fittings) and
NF – EN 1462 (gutter brackets).
197
ENVIRONMENT
25
26
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Reinforced bottom
SAUL
23
HYDRAULIC
DRAINAGE CHANNELS
13
BUILDING
Rainwater shoe
ACCES
TRAP DOOR
FASCIA
AND ROOFING
SOFFIT BOARD
SELECTION PRO
21
RAINGUTTER SYSTEMS
Ovation® «LG28» raingutter available in both assembly systems
REF.
White
REF.
Sand
REF.
Brown
REF.
Dark grey
REF.
Red
REF.
Black
REF.
Green
REF.
REF.
Copper
LG28R*
LG28N*
LG28V*
LG28C*
Packing
Packaging
GUTTER PROFILE
LG28B*
1 Length 4 m
LG28S*
LG28M*
LG28A*
Pack of
5 lengths
(20 m)
Pack of
5 lengths
(10 m)
LG282B* LG282S* LG282M* LG282A* LG282R* LG282N* LG282V* LG282C*
Length 2 m
* Packaged in a polyethylene sleeve in 5 lengths.
SOLVENT WELD GUTTER FITTINGS
RAINGUTTERS
Central expansion outlet
2 Ø 90 x 56
Central expansion Ø 80
(downpipe p. 213)
s
NAD289B NAD289S NAD289M NAD289A NAD289R NAD289N NAD289V NAD289C
5
NAD28B
NAD28S NAD28M NAD28A NAD28R NAD28N
NAD28V
NAD28C
5
o
3 90° Internal angle
l
AIC28B
AIC28S
AIC28M
AIC28A
AIC28R
AIC28N
AIC28V
AIC28C
C5
4 90° External angle
v AEC28B
AEC28S
AEC28M
AEC28A
AEC28R
AEC28N
AEC28V
AEC28C
C5
5 135° Internal angle
e AIC285B AIC285S AIC285M AIC285A AIC285R AIC285N AIC285V AIC285C
6 135° External angle
n
t
AEC285B AEC285S AEC285M AEC285A AEC285R AEC285N AEC285V AEC285C
JNC28B
JNC28S
JNC28M
JNC28A
JNC28R
JNC28N
JNC28V
JNC28C
8 Expansion union part
w JND28B
JND28S
JND28M
JND28A
JND28R
JND28N
JND28V
JND28C
9 Left gutter stopend
e
FG28B
FG28S
FG28M
FG28A
FG28R
FG28N
FG28V
FG28C
S10
l
7 Union part
10 Left stopend outlet
Right stopend outlet
C10
10
FD28B
FD28S
FD28M
FD28A
FD28R
FD28N
FD28V
FD28C
S10
d FGC28B
FGC28S
FGC28M
FGC28A
FGC28R
FGC28N
FGC28V
FGC28C
S10
FDC28B
FDC28S
FDC28M
FDC28A
FDC28R
FDC28N
FDC28V
FDC28C
S10
RUBBER GASKET FITTINGS
11 Central outlet
Ø 90 x 56
12 Gutter union part
90° internal angle
90° External angle
r NAJ289B NAJ289S
u
b JNJ28B JNJ28S
b
e AIJ28B AIJ28S
r
AEJ28B AEJ28S
NAJ289M NAJ289A NAJ289R NAJ289N NAJ289V NAJ289C
C5
JNJ28M
JNJ28A
JNJ28R
JNJ28N
JNJ28V
JNJ28C
C10
AIJ28M
AIJ28A
AIJ28R
AIJ28N
AIJ28V
AIJ28C
C5
AEJ28M
AEJ28A
AEJ28R
AEJ28N
AEJ28V
AEJ28C
135° External angle
g
a AIJ285B AIJ285S AIJ285M AIJ285A AIJ285R AIJ285N AIJ285V AIJ285C
s
k AEJ285B AEJ285S AEJ285M AEJ285A AEJ285R AEJ285N AEJ285V AEJ285C
Left gutter stopend
e FGGJ28B FGGJ28S FGGJ28M FGGJ28A FGGJ28R FGGJ28N FGGJ28V FGGJ28C
C10
t FGDJ28B FGDJ28S FGDJ28M FGDJ28A FGDJ28R FGDJ28N FGDJ28V FGDJ28C
C10
135° Internal angle
C5
GUTTER BRACKETS
Invisible fascia bracket
BHGB28B BHGB28S BHGB28M BHGB28A BHGB28R BHGB28N BHGB28V BHGB28C
50
Mounted bracket for tile
GT28PMB GT28PMS GT28PMM GT28PMA GT28PMR GT28PMN GT28PMV GT28PMC
50
SHANKS
Ovation galvanized shank length on rafter 125, developed 235 mm
®
HCC25VO
C50
ACCESSOIRES
Ovation® galvanized stirrup for gutter bracket
CGO
50
Ovation galvanized stirrup for tile
CTO
50
Catalog
4
®
198
Metal fixing accessories for front attachment of the Ovation® bracket
VI645ET
Cutting template for gutter profiles and downpipe
GAB28
B1
DRAINAGE FITTINGS
REF.
Brown
REF.
Dark grey
REF.
Red
REF. REF. REF.
REF.
BlackCUIVRE
Green
CUIVRE
REF.
Copper
Packing Packaging
90 x 56 DOWNPIPE
Length 4 m
TD95B*
TD95S*
TD95M*
TD95A*
TD95R*
TD95N*
TD95V*
TD95C*
Length 3 m
TD953B*
TD953S*
TD953M*
TD953A*
TD953R*
TD953N*
TD953V*
TD953C*
13 Length 2 m
TD952B*
TD952S*
TD952M*
TD952A*
TD952R*
TD952N*
TD952V*
TD952C*
14 Single socket Branch** This branch must be install with the direction change bend at 67°30 CNO6GT
BN16GTB BN16GTS BN16GTM BN16GTA BN16GTR BN16GTN
67°30
BN16GTV
Pack of
10 lengths
(40 m)
Pack of
10 lengths
(30 m)
Pack of
10 lengths
(20 m)
SANITARY
REF.
Sand
GLUE
REF.
White
SANITARY
90 x 56 downpipe system
* Packageg in a polyethylene sleeve in 5 lengths.
CN1GTB
CN1GTS
CN1GTM
CN1GTA
CN1GTR
CN1GTN
CN1GTV
CN1GTC
C10
16 Single socket bend
45°
CN4GTB
CN4GTS
CN4GTM
CN4GTA
CN4GTR
CN4GTN
CN4GTV
CN4GTC
C10
67°30
CN6GTB
CN6GTS
CN6GTM
CN6GTA
CN6GTR
CN6GTN
CN6GTV
CN6GTC
C10
87°30
CN8GTB
CN8GTS
CN8GTM
CN8GTA
CN8GTR
CN8GTN
CN8GTV
CN8GTC
C10
NEW !
22
CNP9GTS CNP9GTM CNP9GTA
CN9GTR
CN9GTN
CNP9GTR CNP9GTN
CN9GTV
CN9GTC
CNP9GTV CNP9GTC
ZNGTB
ZNGTS
ZNGTM
ZNGTA
ZNGTR
ZNGTN
ZNGTV
ZNGTC
Downpipe collector
JAM95B
JAM95S
JAM95M
JAM95A
JAM95R
JAM95N
JAM95V
JAM95C
Rainwater hopper for
oval downpipe Ø 90 x 56
BAO95B
BAO95S
BAO95M
BAO95A
ZR95B
ZR95S
ZR95M
ZR95A
23 Single socket Ø 80
Ovation® TD95 coupling**
10
C10
5
BAO95N
ZR95R
1
ZR95N
ZR95V
ZR95C
Ventilation
21 Single socket pipe
connector
CN9GTA
REINFORCED BOTTOM DOWNPIPES
24 Straight 1 m
DDF10NB
DDF10NS DDF10NM DDF10NA
DDF10NR
DDF10NN
DDF10NV DDF10NC
CONGTR
CONGTN
CONGTV
CONGTC
S10
PCU95R
PCU95N
PCU95V
PCU95C
C5
2
25 Pipe bracket
CONGTB
CONGTS
CONGTM
CONGTA
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
PIPE BRACKETS
RAINWATER SHOE
THE NICOLL EXTRA
26 Universal rainwater shoe PCU95B
Ø 75 - 80 - 90-100
PCU95S
PCU95M
PCU95A
RAINWATER COLLECTOR
Rainwater collector**
90 x 56
REP95B
REP95S
REP95A
REP95N
B1
Reinforced bottom downpipe is an indispensable
part to protect downpipes on houses and blocks of flats (supplied with a non-glued outlet).
THE NICOLL EXTRA
The universal rainwater shoe is a versatile
complementary part which fits to the following
diameters: 75, 80, 90 and 100.
199
ENVIRONMENT
** Fabricated piece
SAUL
for gable turns**
CN9GTM
FASCIA
AND ROOFING
SOFFIT BOARD
20 90° Single socket bend CNP9GTB
CN9GTS
ACCES
TRAP DOOR
CN9GTB
HYDRAULIC
DRAINAGE CHANNELS
90° direction change
bend
CNO6GTB CNO6GTS CNO6GTM CNO6GTA CNO6GTR CNO6GTN CNO6GTV CNO6GTC
BUILDING
67°30 direction change
19 bend
ROOFING
ACCESSORIES
15°
RAINGUTTERS
DOWNPIPE FITTINGS
RAINGUTTER SYSTEMs
Ovation® «LG38» solvent welding raingutter system
REF.
White
REF.
Sand
REF.
Brown
REF.
Red
REF.
Black
Packing Packaging
GUTTER PROFILE
Length 4 m
LG38B*
LG38S*
LG38M*
LG38R*
LG38N*
Pack of
5 lengths
(20 m)
Length 2 m
LG382B*
LG382S*
LG382M*
LG382R*
LG382N*
Pack of
5 lengths
(10 m)
1
GUTTER FITTINGS
RAINGUTTERS
2
Ø 105 x 76
NAD381B
NAD381S
NAD381M
NAD381R
NAD381N
5
Ø 100 (donwpipe page 215)
NAD38B
NAD38S
NAD38M
NAD38R
NAD38N
5
Internal
AIC38B
AIC38S
AIC38M
AIC38R
AIC38N
5
External
AEC38B
AEC38S
AEC38M
AEC38R
AEC38N
5
90° angle
3
4
135° angle
5
6
Internal
AIC385B
AIC385S
AIC385M
AIC385R
AIC385N
External
AEC385B
AEC385S
AEC385M
AEC385R
AEC385N
For other angle, contact us -See page 179
7
Union part
JNC38B
JNC38S
JNC38M
JNC38R
JNC38N
8
Expansion union part
JND38B
JND38S
JND38M
JND38R
JND38N
Left
FG38B
FG38S
FG38M
FG38R
FG38N
S10
Right
FD38B
FD38S
FD38M
FD38R
FD38N
S10
9
10
C10
10
Gutter stopend
Stopend outlet
Left
FGC38B
FGC38S
FGC38M
FGC38R
FGC38N
S10
Right
FDC38B
FDC38S
FDC38M
FDC38R
FDC38N
S10
GUTTER BRACKET
11 Invisible fascia bracket
12
Mounted bracket for tile
BHGB38B
BHGB38S
BHGB38M
BHGB38R
BHGB38N
50
GT38PMB
GT38PMS
GT38PMM
GT38PMR
GT38PMN
50
SHANKS
Ovation® galvanized shanks length on rafter 125, developed 235 mm
HCC25VO
C50
ACCESSORIES
Ovation® galvanized stirrup for gutter bracket
Ovation® galvanized stirrup for tile
THE NICOLL EXTRA
4
Catalog
50
CTO
50
Metal fixing accessories for front attachment at the Ovation® bracket
VI645ET
Cutting gauge for gutter and downpipe profiles
GAB38
Gutter expansion part is required between 2 fixed
points, particularly on the 4-slope roofs that are
typical of certain regions. It enables shrinkage of the
gutter profiles to be absorbed without disupting the
flow of water.
200
CGO
B1
THE NICOLL EXTRA
Practical and versatile, the cutting gauge is the
perfect guide fto get a very clean cutting of the gutter
and downpipe profiles.
DRAINAGE FITTINGS
REF.
Brown
REF.
Red
REF.
Black
Packing Packaging
105 x 76 DOWNPIPE
Length 4 m
TD107B*
TD107S*
TD107M*
TD107R*
TD107N*
Pack of
7 lengths
(28 m)
13 Length 3 m
TD1073B*
TD1073S*
TD1073M*
TD1073R*
TD1073N*
Pack of
7 lengths
(21 m)
Length 2 m
TD1072B*
TD1072S*
TD1072M*
TD1072R*
TD1072N*
Pack of
7 lengths
(14 m)
BM16GTR
BM16GTN
SANITARY
REF.
Sand
GLUE
REF.
White
SANITARY
105 x 76 downpipe system
BM16GTB
BM16GTS
BM16GTM
RAINGUTTERS
DOWNPIPE FITTINGS
14 Single socket branch**
67°30
This branch must be install with the direction change bend at 67°30 CMO6GT
CM1GTB
CM1GTS
CM1GTM
CM1GTR
CM1GTN
10
17 67°30
18 87°30
CM6GTB
CM6GTS
CM6GTM
CM6GTR
CM6GTN
10
CM8GTB
CM8GTS
CM8GTM
CM8GTR
CM8GTN
10
19 67°30 direction change bend**
CMO6GTB
CMO6GTS
CMO6GTM
CMO6GTR
CMO6GTN
90° direction change bend
CM9GTB
CM9GTS
CM9GTM
CM9GTR
CM9GTN
20 90°Single socket bend for gable
turns**
CMP9GTB
CMP9GTS
CMP9GTM
CMP9GTR
CMP9GTN
ZMGTR
ZMGTN
10
JAM107R
JAM107N
5
BAO107B
BAO107S
BAO107M
BAO107N
1
ZT107B
ZT107S
ZT107M
ZT107R
ZT107N
DDF10MM
DDF10MR
DDF10MN
COMGTM
COMGTR
COMGTN
PCU107M
PCU107R
PCU107N
Ventilation
Female single socket Ø 100
24 Ovation® TD107**
ZMGTM
JAM107M
REINFORCED BOTTOM DOWNPIPES
25 Straight - 1 m
DDF10MB
DDF10MS
2
THE NICOLL EXTRA
26
Pipe bracket
COMGTB
COMGTS
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
PIPE CLIPS
S10
RAINWATER SHOE
Universal rainwater shoe
Ø 90 - 100 - 110 - 125
PCU107B
PCU107S
5
RAINWATER COLLECTOR
REP107B
REP107S
REP107N
B1
THE NICOLL EXTRA
2 downpipes can be connected together
in the top section of the downpipe outlet
giving a single downpipe in the bottom section. Its
original design and geometry add to the attractive
appearance of the gutter downpipe installation.
Donwpipe clip is a patented system. This
has a discreet rear fastening to keep the design
smooth. It is clipped together by hand and unclipped
with a screwdriver.
www.ovation-nicoll.com
201
ENVIRONMENT
Rainwater collector**
105 x 76
** Fabricated piece
SAUL
Rainwater hopper for oval
downpipe 105 x 76
ZMGTS
JAM107S
ACCES
TRAP DOOR
23
ZMGTB
JAM107B
HYDRAULIC
DRAINAGE CHANNELS
NEW !
22 Downpipe collector
C5
BUILDING
21 Single socket pipe connector
FASCIA
AND ROOFING
SOFFIT BOARD
15 15°
ROOFING
ACCESSORIES
Single socket bend
25 and 33
halF-round systems
RAINGUTTERS
Traditional solvent weld or rubber gasket
gutter for all types of roof.
25 and 33 half-round rainwater systems blend perfectly into traditional
architectural styles. A wide range of fittings and brackets ensures they will always
be in keeping with them.
ADVANTAGES
In keeping with traditional architectural styles.
Excellent hydraulic capacity.
Hardwearing.
Wide range of colours.
Large choice of brackets for half-round solvent weld
or rubber gasket systems: concealed brackets, fascia
brackets, directional rafter brackets, corrugated roof
bracket, mounted tile brackets.
Self-cleaning capacity for 33 gutter.
14-1588
ATEC No 14 + 5/10-1588
Catalog
4
(LG25 raingutter and Belriv® system)
202
DRAINAGE FITTINGS
Gutter profile
Used for
Characteristic
Downpipe
RAINGUTTERS
25 Half round
Detached, semi-detached and suburban houses
Traditional style
Assembly
ROOFING
ACCESSORIES
Shape
Solvent weld or rubber gasket
Measurements
Ø 80
Polyvinyl chloride
Round Ø 80
66,4 cm²
Ø 80 = 46,6 cm²
Brown
Dark grey
Red
Black Green Copper*
33 Half-round
Used for
Characteristic
Gutter profile
Downpipe
Ventilation
Grey White Sand
*25 solvent-weld assembly only
ACCES
TRAP DOOR
Ø 80 = 65 m²
BUILDING
Colours
FASCIA
AND ROOFING
SOFFIT BOARD
Hydraulics capacity
Material
Profile
Section
SANITARY
GLUE
SANITARY
technical features
Houses, blocks of flats, industrial buildings, farm buildings
For large expanses of roof
Measurements
Ø 100
Ø 125
Hydraulic capacity
Material
Profile
Round Ø 100 and Ø 125
Section
143 cm²
Ø 100 = 73,9 cm²
Ø 125 = 116,9 cm²
Polyvinyl chloride
Grey
Colours
White
Red
Sand
Brown
Colours Ø 100 :
Grey
White
Sand
Brown
Red
Colours Ø 125 :
Grey
White
Sand
Brown
203
ENVIRONMENT
Ø 100 = 100 m²
Ø 125 = 160 m²
Flat roof area served by a running outlet
SAUL
Solvent welding or rubber gasket
HYDRAULIC
DRAINAGE CHANNELS
Assembly
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Shape
25 and 33 half-round
Gutter profile
RAINGUTTERS
5
30
9
12
10
4
11
7
2
1
6
3
4
11 bis
Rubber gasket system
- Fastening incorporated into the fittings
(outlet and gutter union part) to form a
fixed point which allows for expansion
and Reduces the number of brackets.
- Notched to prevent water retention.
There are 2 types of half-round gutter brackets - Position mark on ends of the gutter
etched into the fitting to allow for natural variations
for all architectural styles.
in the profile.
The concealed bracket (for 25 guttering only)
- Solvent weld EPDM neoprene joint for perfect sealing.
makes the design smoother and the fascia bracket
matches traditional styles.
Brackets
Solvent weld system
THE Nicoll EXTRA
• The expansion union part improves the
Catalog
4
installation’s performance, particularly on
4-slope roofs or between 2 fixed points
(solvent weld angles), typical in some
regions.
204
- The solvent weld system is used for cold welding of
guttering parts. This operation
ensures perfect watertightness
and
excellent
mechanical
performance.
- 2 lines of glue should be used
for best results:
- One line of glue in the coupling
grooves to seal the system.
- Another line of glue round the edge of the coupling to
ensure the parts hold together.
DRAINAGE FITTINGS
GLUE
Downpipe bracket
RAINGUTTERS
This fits round the pipe and has
an articulated bracket which
locks with a captive screw.
Single bend section
Only available for Ø 80 pipes.
16
26
Reinforced bottom downpipe
High mechanical resistance. Indispensable
for PVC downpipes, it is also compatible with
other commonly-used materials.
Ventilation
14
21
29
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Rainwater hopper
For fitting different rainwater pipes - downpipes,
horizontal terrace outlets, overflows, etc.
THE Nicoll EXTRA
• The new Vodalis® bends with
sockets incorporated enhance
downpipe design
(see the Vodalis Gutters
catalogue).
205
ENVIRONMENT
27
SAUL
24
BUILDING
Excellent for replacing sockets or using up
pieces of rainwater pipes.
FASCIA
AND ROOFING
SOFFIT BOARD
Double socket
pipe connector
ACCES
TRAP DOOR
13
HYDRAULIC
DRAINAGE CHANNELS
15 16
ROOFING
ACCESSORIES
To make up for misalignment between the outlet
and the downpipe.
It can also be used to make
the downpipe plumb in
relation to the roof pitch.
18 17
SANITARY
SANITARY
25 and 33 half-round
Downpipe
raingutter SYSTEMS
25 Half-round
solvent weld gutter system with Atec
REF.
Grey
REF.
White
REF.
Sand
REF.
Brown
REF.
Dark grey
REF.
Red
REF.
Black
REF.
Green
REF.
Copper
LG25R*
LG25N*
LG25V*
LG25C*
Packing Packaging
GUTTER PROFILE
1
Length 4 m
LG25*
LG25B*
LG25S*
LG25M*
LG25A*
Length 2 m
LG252*
LG252B* LG252S* LG252M* LG252A* LG252R* LG252N* LG252V* LG252C*
Pack of
10 lengths
(40 m)
Pack of
10 lengths
(20 m)
GUTTER FITTINGS
RAINGUTTERS
2
3
NAD25
NADT25 NADT25B NADT25S NADT25M NADT25A NADT25R NADT25N NADT25V NADT25C
10
Solvent weld Ø 80
NAC25
NAC25C
10
Solvent weld Ø 100
NACT25 NACT25B NACT25S NACT25M
NACT25V NACT25C
10
NADN25B NADN25S NADN25M NADN25A NADN25R NADN25N NADN25V NADN25C
10
Central expansion 90 x 56
(downpipe p.199)
NAD25B
NAC25B
NAD25S NAD25M NAD25A NAD25R NAD25N
NAC25S NAC25M NAC25A
NAC25R
NAC25N
NACT25R
Leafguard Ø 80 and 100
Black colour
NAD25V
NAC25V
NAD25C
CRAP
10
C10
4
90° Angles
ANC25
ANC25C
C10
5
135° Angles
ANC525 ANC525B ANC525S ANC525M ANC525A ANC525R ANC525N ANC525V ANC525C
C10
ANC25B
ANC25S ANC25M ANC25A
ANC25R
ANC25N
ANC25V
For other angles, contact us - See page 179
6
Expansion union part
JND25
JND25B
JND25S
JND25M
JND25A
JND25R
JND25N
JND25V
JND25C
7
Union part
JNC25
JNC25B
JNC25S
JNC25M
JNC25A
JNC25R
JNC25N
JNC25V
JNC25C
C10
FCN25S
10
Universal stopend
8
outlet
FCN25
FCN25B
FCN25M
FCN25A
FCN25R
FCN25N
FCN25V
FCN25C
S10
9
gutter
FCG25
FCG25B FCG25S** FCG25M
FCG25A
FCG25R
FCG25N
FCG25V
FCG25C
S10
100
GUTTER BRACKET
10
11
11 bis
12
BHGB25 BHGB25B BHGB25S BHGB25M BHGB25A BHGB25R BHGB25N BHGB25V BHGB25C
Non-mounted bracket (for
corrugated roofs)
GO25P
GO25PB
GO25PS
Plastic fascia bracket
GB25P
GB25PB
GB25PS GB25PM
Adjustable fascia bracket
GBR25P GBR25PB GBR25PS GBR25PM GBR25PA GBR25PR GBR25PN GBR25PV GBR25PC
50
Directional rafter bracket
GCO25P GCO25PB GCO25PS
50
GT25PMS
50
Mounted tile bracket
50
50
GB25PA
GB25PR
GB25PN
GB25PV
GB25PC
50
All roof
GO25PM GO25PMB GO25PMS GO25PMM GO25PMA
GO25PMN
50
Mounted with stirrup to be struck GO25PFCM GO25PFCMB GO25PFCMS GO25PFCMM GO25PFCMA
GO25PFCMN
50
Non-mounted bracket
NEW !
Fiber cement roof
Corrugated iron roof
12 bis
GO25PBAMC
Mounted with stirrup to be struck GO25PBAM GO25PBAMB GO25PBAMS GO25PBAMM GO25PBAMA GO25PBAMR GO25PBAMN
Single 25 PVC bracket for
BERGO25P BERGO25B BERGO25S BERGO25M BERGO25A BERGO25R BERGO25N BERGO25V BERGO25C
metal accessory
50
50
DRIP EDGE
30
Length 2 m
LARM18 LARM18B LARM18S LARM18M
Pack of
10 lengths
(20 m)
LARM18R LARM18N LARM18V
accessoRIES
Catalog
4
Metal fixing accessories
for front attachment of the
bracket
VI645ET
** Packing for only sand colour.
206
B1
DRAINAGE FITTINGS
REF.
White
REF.
Sand
REF.
Brown
REF.
Dark grey
REF.
Red
REF.
Black
REF.
Copper
Packing Packaging
GUTTER PROFILE
Length 4 m
LG25*
LG25B*
LG25S*
LG25M*
LG25A*
LG25R*
LG25N*
LG25C*
Pack of
10 lengths
(40 m)
Length 2 m
LG252*
LG252B*
LG252S*
LG252M*
LG252A*
LG252R*
LG252N*
LG252C*
Pack of
10 lengths
(20 m)
NC25R
NC25N
NC25C
10
SANITARY
REF.
Grey
GLUE
- Rubber gasket system
SANITARY
25 half-round
NC25S
Internal angle
DID YOU KNOW ?
NC25A
CRAP
AI25
AI25B
AI25S
AI25M
AI25A
AI25R
AI25N
AI25C
10
10
ROOFING
ACCESSORIES
Leafguard
NC25M
External angle
AE25
AE25B
AE25S
AE25M
AE25A
AE25R
AE25N
AE25C
Union part
JN25
JN25B
JN25S
JN25M
JN25A
JN25R
JN25N
JN25C
C10
outlet
FNJ25
FNJ25B
FNJ25S
FNJ25M
FNJ25A
FNJ25R
FNJ25N
FNJ25C
S10
gutter
FGJ25
FGJ25B
FGJ25S
FGJ25M
FGJ25A
FGJ25R
FGJ25N
FGJ25C
S10
GB25PA
GB25PR
GB25PN
GB25PC
FASCIA
AND ROOFING
SOFFIT BOARD
Other angles, contact us - See page 179
GB25PB
GB25PS
Non-mounted bracket (for
corrugated roofs)
GO25P
GO25PB
GO25PS
Directional rafter bracket
GCO25P
GCO25PB GCO25PS
All roof
Mounted bracket
GO25PM
GO25PMB
GB25PM
50
50
Ventilation
GB25P
50
GO25PMS GO25PMM GO25PMA
GO25PMN
50
Mounted with stirrup to be struck GO25PFCM GO25PFCMB GO25PFCMS GO25PFCMM GO25PFCMA
GO25PFCMN
50
Mounted with stirrup to be struck GO25PBAM GO25PBAMB GO25PBAMS GO25PBAMM GO25PBAMA GO25PBAMR GO25PBAMN
50
Single 25 PVC bracket
for metal accessory
50
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Plastic fascia brackets
Fiber cement roof
BERGO25P BERGO25B BERGO25S BERGO25M BERGO25A BERGO25R BERGO25N BERGO25C
DID YOU KNOW ?
A gutter angle with rubber
gasket must be held in place
by 2 gutter brackets at a
maxiimum distance of 5 cm.
AI25S
207
ENVIRONMENT
NEW !
GUTTER BRACKETS
BUILDING
Rubber gasket stopend
SAUL
NC25B
ACCES
TRAP DOOR
NC25
HYDRAULIC
DRAINAGE CHANNELS
Central outlet
RAINGUTTERS
GUTTER FITTINGS with rubber gasket
RAINGUTTER SYSTEMs
33 Solvent weld
half-round system
REF.
Grey
REF.
White
REF.
Sand
REF.
Brown
REF.
Red
LG33B*
LG33S*
LG33M*
LG33R*
Pack of
10 lengths
(40 m)
NAD33R
6
Packing Packaging
GUTTER PROFILE
1
LG33*
Length 4 m
GUTTER FITTINGS
RAINGUTTERS
2
3
NAD33
NAD33B
NAD33S
NAD33M
NAD333
NAD333B
NAD333S
NAD333M
Solvent weld Ø 100
Solvent weld Ø 125
NAC33
NAC33B
NAC33S
NAC33M
NAC333
NAC333B
NAC333S
Leafguard Ø 100
6
NAC33R
10
10
CRAP
Solvent welding angle
4
90°
5
135°
ANC33
ANC33B
ANC33S
ANC33M
ANC533
ANC533B
ANC533S
ANC533M
ANC33R
10
6
Expansion union part (Fabricated piece)
JND33
JND33B
JND33S
JND33M
JND33R
7
Union part
JNC33
JNC33B
JNC33S
JNC33M
JNC33R
C10
Stopend
8
Universal outlet
FCN33
FCN33B
FCN33S
FCN33M
FCN33R
S10
9
Universal gutter
FCG33
FCG33B
FCG33S
FCG33M
FCG33R
S10
GB33PS
GB33PM
GB33PR
50
GO33PMR
50
GUTTER BRACKET
11
GB33P
GB33PB
All roof
GO33PM
Mounted (corrugated roofs)
GO33PMS
Mounted with stirrup to be struck
GO33PBAM GO33PBAMB GO33PBAMS GO33PBAMM
50
GO33PFCM
50
NEW !
Fiber cement roof
GO33PFCMS GO33PFCMM
Single 33 PVC bracket for metal accessory BERGO33P BERGO33B
GO33P
Non mounted
REF.
Grey
REF.
White
BERGO33S
BERGO33M BERGO33R
50
GO33PS
REF.
Sand
REF.
Brown
REF.
Red
REF.
Black
LARM18S
LARM18M
LARM18R
LARM18N
Packing Packing
DRIP EDGE
Catalog
4
30
208
Length 2 m
LARM18
LARM18B
Pack of
10 lengths
(20m)
DRAINAGE FITTINGS
REF.
Sand
REF.
Brown
LG33S*
LG33M*
Packing Packaging
GUTTER PROFILE
LG33*
Length 4 m
Pack of 10
lengths (40 m)
GLUE
REF.
Grey
SANITARY
- rubber gasket system
SANITARY
Rubber gasket 33 half-round
GUTTER FITTINGS
Ø 100
NC33
NC33S
NC33M
10
Ø 125
NC333
NC333S
NC333M
10
CRAP
ROOFING
ACCESSORIES
C10
AI33S
10
AE33
AE33S
10
Union part
JN33
JN33S
JN33M
Universal outlet
FCN33
FCN33S
FCN33M
S10
Universal gutter
FCG33
FCG33S
FCG33M
S10
10
BUILDING
Stopend
GB33P
GB33PS
GB33PM
50
Non-mounted
go33p
go33ps
go33pm
50
GO33PM
GO33PMS
O33PMM
50
GO33PFCM
GO33PFCMS
GO33PFCMM
50
GO33PBAM
GO33PBAMS
GO33PBAMM
50
Single 33 PVC bracket for metal accessory
BERGO33P
BERGO33S
BERGO33PM
50
Ventilation
GUTTER BRACKETS
Mounted (corrugated roofs)
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Any roof
209
ENVIRONMENT
NEW !
Fiber cement roof
SAUL
AI33
90° external
ACCES
TRAP DOOR
90° internal
FASCIA
AND ROOFING
SOFFIT BOARD
Angles
HYDRAULIC
DRAINAGE CHANNELS
Leafguard
RAINGUTTERS
Central outlet
raingutter systemS
25 metal gutter accessories
REF.
Packing Packaging
SHANKS
Galvanized
HCL25
HCC25*
HCL25*
50
HCL50*
50
HCH25*
50
C50
HCH25
RAINGUTTERS
Shanks in bag
1HCC25*
S1
50
Galvanized 335 mm - bag of 1 piece with included screw
1HCL25*
S1
50
Twisted - bag of 1 piece with included screw
1HCH25*
S1
50
1HCC25
1HCH25
STIRRUP
KEO
NEW !
EO70G
Galvanized stirrup to be screwed for any kind of roof
EO70G*
Wedge for galvanized stirrup EO70G for thin roofing
KEO
EFC70G*
50
EBA70G*
50
EOALI*
50
EOGCT*
50
CT*
50
CG*
50
Galvanized «alligator» stirrup
EOALI
Galvanized Redwork stirrup for half-round: 25, 33 and 29
CT
CG
50
C50
1CT*
S1
50
1EO70G*
S1
50
to be struck fiber cement roof - bag of 1 piece
1EFC70G*
S1
50
to be struck corrugated iron roof - bag of 1 piece
1EBA70G*
S1
50
CN25F
C50
NEW !
for tile - bag of 1 piece
to screw for all type of roof - bag of 1 piece
EBA70G
EFC70G
BRACKETS
Snow
CN25F
For 25 half-round raingutter system
CP
CP*
Nail bracke
50
Our shanks and brackets come with all necessary fastenings.
THE NICOLL EXTRA
Nicoll’s metal accessories are hot-dip galvanized in accordance with the EN1461 standard (min
thickness of 55 microns).
Catalog
4
This makes them suitable for use in severe conditions (coastal areas or industry) and guarantee
a minimum lifespan of 10 years.
210
DRAINAGE FITTINGS
Packing Packaging
SHANKS
SANITARY
REF.
SANITARY
33 metal gutter accessories
Galvanized
HCC25*
HCL25*
50
HCL50*
50
HCH25*
50
GLUE
C50
HCH25
1HCC25*
S1
50
1HCL25*
S1
50
Twisted - bag of 1 piece with included screw
1HCH25*
S1
50
1HCC25
1HCH25
RAINGUTTERS
Shanks in bag
Wedge for galvanized stirrup EO70G for thin roofing
KEO
EFC70G*
50
EBA70G*
50
EOALI*
50
EOGCT*
50
CT*
50
CG*
50
EOALI
Galvanized Redwork stirrup for half-round: 25, 33 and 29
CT
CG
C50
FASCIA
AND ROOFING
SOFFIT BOARD
Galvanized «alligator» stirrup
50
BUILDING
KEO
NEW !
EO70G
EO70G*
ROOFING
ACCESSORIES
STIRRUP
Galvanized stirrup to be screwed for any kind of roof
ACCES
TRAP DOOR
HCL25
50
To be struck fiber cement roof - bag of 1 piece
1EFC70G*
S1
50
To be struck corrugated iron roof - bag of 1 piece
1EBA70G*
S1
50
CN33F
C50
BRACKETS
Snow
CN33F
for 33 half-round raingutter system
CP
CP*
Nail bracket
50
Our shanks and brackets comm with all necessary fastening.
THE NICOLL EXTRA
Nicoll’s metal accessories are hot-dip galvanized in accordance with the EN1461 standard (min
thickness of 55 microns).
This makes them suitable for use in severe conditions (coastal areas or industry) and guarantee
a minimum lifespan of 10 years.
211
ENVIRONMENT
NEW !
EBA70G
EFC70G
SAUL
50
S1
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
S1
to screw for all type of roof - bag of 1 piece
HYDRAULIC
DRAINAGE CHANNELS
1CT*
1EO70G*
for tile - bag of 1 piece
Ventilation
RAINGUTTER SYSTEM
ø 80 half-round downpipe system
Please note:
for socketed pipes, add the «p» to the basic product reference.
Ex: TD80S becomes TD80PS.
REF.
Grey
REF.
White
REF.
Sand
REF.
REF.
Brown Dark grey
REF.
Red
REF.
Black
REF.
Green
REF.
REF.
PackaCUIVRE Packing ging
Copper
DOWNPIPE PROFILE
TD80B* TD80S* TD80M* TD80A* TD80R* TD80N* TD80V* TD80C*
Pack of
10 lengths
(40 m)
Length 3 m
TD803* TD803B* TD803S* TD803M* TD803A* TD803R* TD803N* TD803V* TD803C*
Pack of
10 lengths
(30 m)
Length 2 m
TD802* TD802B* TD802S* TD802M* TD802A* TD802R* TD802N* TD802V* TD802C*
Pack of
10 lengths
(20 m)
13 Length 4 m
TD80*
RAINGUTTERS
DOWNPIPE FITTINGS*
14 Single socket branch
67°30
Plug
BR16GT BR16GTB BR16GTS BR16GTM BR16GTA BR16GTR BR16GTN BR16GTV BR16GTC
FRGT
FRGTB
10
FRGTS
10
Single socket bend
15
20°
CR2GT CR2GTB CR2GTS CR2GTM CR2GTA CR2GTR CR2GTN CR2GTV CR2GTC
10
16
45°
10
17
67°30
10
18
87°30
10
45°
CR44GT CR44GTB CR44GTS CR44GTM
CR44GTV CR44GTC
10
67°30
10
87°30
CR88GT CR88GTB CR88GTS CR88GTM
10
Double socket bend
24 Double socket pipe
connector
NEW !
26 Downpipe outlet
Rainwater hopper
CR44GTR
CR88GTR
CR88GTV CR88GTC
JRGT
JRGTB
JRGTS
JRGTM
JRGTA
JRGTR
JRGTN
JRGTV
JRGTC
10
ZRGT
ZRGTB
ZRGTS
ZRGTM
ZRGTA
ZRGTR
ZRGTN
ZRGTV
ZRGTC
10
JAM80 JAM80B JAM80S JAM80M JAM80A JAM80R JAM80N JAM80V JAM80C
5
BAO80 BAO80B BAO80S BAO80M BAO80A
6
BAO80N
BEND SECTIONS
15°
SR1GT SR1GTB SR1GTS SR1GTM SR1GTA SR1GTR SR1GTN SR1GTV SR1GTC
C10
30°
SR3GT SR3GTB SR3GTS SR3GTM SR3GTA SR3GTR SR3GTN SR3GTV SR3GTC
C10
Pipe BRACKETS
29
Flange
CORGT CORGTB CORGTS CORGTM CORGTA CORGTR CORGTN CORGTV CORGTC
S10
Lyre
C080GT CO80GTB CO80GTS
S10
AC80GT
Safety strap
S25
Bracket in plastic bag
Bag of 2 pieces
2CORGT
2CORGTS
S2
Safety strap - bag of 2 pieces
2CA8GT
2CA8GTS
S2
50
RAINWATER SHOE
RWS80 RWS80B RWS80S RWS80M RWS80A RWS80R RWS80N RWS80V RWS80C
4
Catalog
C10
Nota : plug screws see an page 157
212
DRAINAGE FITTINGS
REF.
Brown
REF.
Dark grey
REF.
Red
REF.
Black
REF.
Copper
Packing Packaging
DONWPIPE
Length 4 m Ø 80
TD80B*
TD80S*
TD80M*
TD80A*
TD80R*
TD80N*
TD80C*
Pack of
10 lengths
(40 m)
Length 2 m Ø 80
TD802B*
TD802S*
TD802M*
TD9802A*
TD802R*
TD802N*
TD802C*
Pack of
10 lengths
(20 m)
SANITARY
REF.
Sand
GLUE
REF.
White
SANITARY
ø 80 Half -round downpipe - Aesthetic range
DOWNPIPE FITTINGS
CR4GT1B
CR4GT1S
CR4GT1M
CR4GT1A
CR4GT1R
CR4GT1N
CR4GT1C
10
Single socket single socket
bend 67°30 Ø 80
CR6GT1B
CR6GT1S
CR6GT1M
CR6GT1A
CR6GT1R
CR6GT1N
CR6GT1C
10
bend 87°30 Ø 80
CR8GT1B
CR8GT1S
CR8GT1M
CR8GT1A
CR8GT1R
CR8GT1N
CR8GT1C
10
JRGTB
JRGTS
JRGTM
JRGTA
JRGTR
JRGTN
JRGTC
10
JAM80B
JAM80S
JAM80M
JAM80A
JAM80R
JAM80N
JAM80C
5
BAO80B
BAO80S
BAO80M
BAO80A
BAO80R
BAO80N
PAF801A
PAF801R
PAF801N
5
FASCIA
AND ROOFING
SOFFIT BOARD
LEAF TRAP Ø 80
PAF801B
PAF801S
PAF801M
1PAF801C
5
REINFORCED BOTTOM DOWNPIPE
DDF10RB
DDF10RS
DDF10R1A
5
DCF10RB
DCF10RS
DCF10RA
5
Clip bracket Ø 80 to clip
CORGT1B
CORGT1S
CORGT1A
CORGT1R
CORGT1N
CORGT1C
S10
COTGT1SIB
COTGT1SIS COTGT1SIM COTGT1SIA
CORGT1M
COTGT1SIR
COTGT1SIN
COTGT1SIC
S10
RWS801R
RWS801N
RWS801C
Ventilation
DownPIPE BRACKET
BUILDING
Ø 80
Ø 80
RWS801B
RWS801S
RWS801M
RWS801A
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
RAINWATER SHOE
10
REPTD80B REPTD80S REPTD80M REPTD80A
REPTD80N REPTD80C
Rainwater collector Ø 80
REP80B
REP80N
REP80S REP80M REP80A
DID YOU KNOW ?
New downpipe fittings Ø 80 - aesthetic range is available for all Nicoll raingutter system.
THE NICOLL EXTRA
Bracket The locks for the Vodalis® fastening clips
are invisible thanks to the rear closure.
Rainwater shoe With its revamped design, the
Vodalis® rainwater shoe provides optimal flow while
ensuring clean drainage.
213
ENVIRONMENT
NEW !
RAINWATER COLLECTOR
Rainwater collector new
generation (fitting 26 x 34)
SAUL
Double socket pipe
connector Ø 80
ROOFING
ACCESSORIES
bend 45° Ø 80
RAINGUTTERS
10
ACCES
TRAP DOOR
BR16GT1B BR16GT1S BR16GT1M BR16GT1A BR16GT1R BR16GT1N BR16GT1C
HYDRAULIC
DRAINAGE CHANNELS
NEW !
Single socket branch
67°30 Ø 80
RAINGUTTER SYSTEMS
ø 100 downpipe
Please note:
for socketed pipes, add the «p» to the basic product reference
Ex: TD100S becomes TD100PS
REF.
Grey
REF.
White
REF.
Sand
REF.
Brown
REF.
Red
TD100S*
TD100M*
TD100R*
Pack of
5 lengths
(20 m)
BT16GTM
BT16GTR
10
Packing Packaging
DOWNPIPE PROFILE
TD100*
13 Length 4 m ø 100
TD100B*
DOWNPIPE FITTINGS*
14
Single socket Branch
BT16GT
67°30
BT16GTB
BT16GTS
RAINGUTTERS
Single socket bend
15 20°
16 45°
CT2GT
CT4GT
CT4GTB
CT4GTS
CT4GTM
CT4GTR
10
17 67°30
18 87°30
CT6GT
CT6GTB
CT6GTS
CT6GTM
CT6GTR
10
CT8GT
CT8GTB
CT8GTS
CT8GTM
CT8GTR
10
45°
CT44GT
CT44GTB
CT44GTS
67°30
CT66GT
CT66GTB
CT66GTS
CT66GTM
CT66GTR
87°30
21 Female double socket pipe
connector
24 Single socket coupling
CT88GT
CT88GTB
CT88GTS
JTGT
JTGTB
JTGTS
ZTGT
ZTGTB
ZTGTS
26 Downpipe outlet
JAM100
JAM100B
JAM100S
BAO100
BAO100B
BAO100S
RE338
RE338GTB
RE338S
CT2GTS
10
Double socket bend
Rainwater hopper ø 100
Concentric Reducer Ø 100/80
10
10
10
JTGTM
JTGTR
10
ZTGTM
ZTGTR
10
JAM100M
JAM100R
5
BAO100M
BAO100R
5
RE338M
RE338R
C10
Traditional
27
Straight - Length 1 m
DDF10T
DDF10TB
DDF10TS
5
With bend - Length 1 m
DCF10T
DCF10TB
DCF10TS
5
RAINWATER SHOE
RWS100
rainwater shoe
RWS100B
RWS100S
RWS100M
RWS100R
RAINWATER COLLECTOR
Rainwater collector
tongue Ø 100
with
REP100
REP100B
REP100S
B1
PIPE BRACKETS
29
COTGT
Pipe bracket with screws
COTGTB
C0100GT
Pipe clip
COTGTS
C0100GTS
AC100GT
Safety strap
COTGTM
COTGTR
S10
S10
S25
Bracket in plastic bag
Bag of 2 pieces
2COTGT
2COTGTS
S1
Safety strap - bag of 2 pieces
2CA10GT
2CA10GTS
S1
Length 30 mm
PV3BO
B100
Length 40 mm
PV4BO
B100
Length 50 mm
PV5BO
B100
BRACKET FIXING
Bichromated plug screws
Nut driver
OV
Catalog
4
See metal accessories on page 230
214
DRAINAGE FITTINGS
REF.
Brown
REF.
Dark grey
REF.
Red
TD100M*
TD100A*
TD100R*
Packing Packaging
DOWNPIPE
13 Length 4 m Ø 100
TD100B*
TD100S*
Pack of 5 lengths
(20m)
SANITARY
REF.
Sand
GLUE
REF.
White
SANITARY
ø 100 downpipe - Aesthetic range
Packaged in a polyethylene sleeve in 10 Lengths.
BT16GT1B BT16GT1S BT16GT1M BT16GT1A BT16GT1R
Single socket aesthetic bend
45° Ø 100
CT4GT1B
CT4GT1S
CT4GT1M
CT4GT1A
CT4GT1R
10
67°30 Ø 100
CT6GT1B
CT6GT1S
CT6GT1M
CT6GT1A
CT6GT1R
10
87°30 Ø 100
CT8GT1B
CT8GT1S
CT8GT1M
CT8GT1A
CT8GT1R
10
JTGTA
JTGTM
RE338S
RE338M
JTGTR
JAM100B JAM100S JAM100M JAM100A JAM100R
5
BAO100B
6
10
C10
BAO100S BAO100M BAO100A
FASCIA
AND ROOFING
SOFFIT BOARD
RE338R
ROOFING
ACCESSORIES
JTGTS
RE338GTB
DDF10TB
DDF10TS
DDF10T1A
5
Bended with aesthetic rainwater shoe Length 1 m
DCF10TB
DCF10TS
DCF10T1A
5
BUILDING
NEW !
AESTHETIC REINFORCED DOWNPIPE
DOWNPIPE BRACKET
COTGT1B
COTGT1S
COTGT1M
COTGT1A
COTGT1R
S10
Ventilation
Bracket to clip Ø 100
RAINWATER SHOE
RWS1001B RWS1001S RWS1001M RWS1001A RWS1001R
10
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Rainwater collector new generation* for pipe Ø 100 (fitting 26 x 34)
Ø 100 fabricated piece
REPF100B REPF100S REPF100M REPF100A
Collier The locks for the Vodalis® fastening clips are
invisible thanks to the rear closure
B1
Rainwater shoe With its revamped design, the
Vodalis rainwater shoe provides optimal flow
while ensuring clean drainage.
DID YOU KNOW ?
New downpipe fittings Ø 100 - aesthetic serie is available for all the Nicoll raingutter systems.
215
ENVIRONMENT
NEW !
RAINWATER COLLECTOR
SAUL
JTGTB
Concentric Reducer Ø 100/80
ACCES
TRAP DOOR
Double socket coupling Ø 100
RAINGUTTERS
10
HYDRAULIC
DRAINAGE CHANNELS
NEW !
DOWNPIPE FITTINGS
Single socket aesthetic branch
67°30 Ø 100
RAINWATER SYSTEMs
Downpipe ø 125
Please note:
REF.
Grey
REF.
White
REF.
Sand
REF.
Brown
TD125S*
TD125M*
Packing Packaging
DOWNPIPE PROFILE
13
TD125*
Length 4 m Ø 125
TD125B*
Pack of 5 lengths
(20 m)
DOWNPIPE FITTINGS
RAINGUTTERS
14 Single socket branch
BX16GT
BX16GTB
BX16GTS
16 45°
CX4GT
CX4GTB
CX4GTS
17 67°30
CX6GT
CX6GTB
CX6GTS
18 87°30
CX8GT
CX8GTB
CX8GTS
21 Double socket pipe connector
JXGT
JXGTB
JXGTS
25 Single socket coupling
ZXGT
ZXGTB
ZXGTS
COXGTB
COXGTS
67°30
10
Single socket bend
10
CX6GTM
10
10
JXGTM
10
10
BRACKET
29 Flange
COXGT
COXGTM
S10
Lyre
C0125GT
S10
Safety strap
AC125GT
S10
Catalog
4
Nota: shanks, stirrup, bracket for tile, etc... see p. 230
216
SAUL
HYDRAULIC
DRAINAGE CHANNELS
ENVIRONMENT
217
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Ventilation
ACCES
TRAP DOOR
BUILDING
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
RAINGUTTERS
GLUE
SANITARY
SANITARY
DRAINAGE FITTINGS
16 half round
RAINGUTTERS
The usual format for small roofs
The 16 half-round gutter system is the best solution for small roofs. It is very
easy to fit and can be used with most roofing materials.
ADVANTAGES
Easy to fit.
Can be used with most roofing materials (thick and
thin) including glass and plastic.
Hydraulic capacity adequate for small roofs.
Catalog
4
One end piece for 4 functions with the universal gutter
stopend and outlet stopend.
218
DRAINAGE FITTINGS
SANITARY
GLUE
SANITARY
Gutter profile
Used for
Characteristics
Donwpipe
Garden sheds, verandas
For small surfaces
ROOFING
ACCESSORIES
LG16 Half-round
RAINGUTTERS
technical features
Shape
Assembly
Rubber gasket system
Ø 50
Hydraulic capacity
Round Ø 50
24,8 cm²
Ø 50 = 17,3 cm²
Flat roof area served by a collector
20 m²
Ø 50 = 20 m²
Grey
White
Sand
Brown
Ventilation
Colours
BUILDING
Polyvinyl chloride
DID YOU KNOW ?
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Co-extrusion
The inside surface is partly made of recycled PVC. The outside surface is perfect because it is made of new
PVC with a concentration of pigments developed to
resist ultra-violet rays.
THE
NICOLL EXTRA
Marking
219
SELECTION PRO
ENVIRONMENT
All the profiles and fittings are marked so they are easy to identify for making extensions.
SAUL
HYDRAULIC
DRAINAGE CHANNELS
Material
Profile
Section
ACCES
TRAP DOOR
FASCIA
AND ROOFING
SOFFIT BOARD
Measurements
raingutter systems
16 Half-round gutter
rubber gaskets system
REF.
Grey
REF.
White
REF.
Sand
REF.
Brown
Packing Packaging
GUTTER PROFILE
Length 4 m
LG16*
LG16B*
LG16S*
LG16M*
Length 2 m
LG162*
LG162B*
LG162S*
LG162M*
Pack of
10 lengths
(40 m)
Pack of
10 lengths
(20 m)
RAINGUTTERS
GUTTER FITTINGS WITH RUBBER GASKETS
Central outlet Ø 50
NC16
NC16B
NC16S
NC16M
C10
Internal
AI16
AI16B
AI16S
AI16M
C10
External
AE16
AE16B
AE16S
AE16M
C10
Junction
JN16
JN16B
JN16S
JN16M
C10
Universal stop end suitable for both
gutter profile and central outlet
FCN16
FCN16B
FCN16S
FCN16M
S10
Angle
GUTTER BRACKETS
Fascia brackets
GB1
GB1B
GB1S
GB1M
S20
Corrugated roof bracket with set of
wedges
GO4
GO4B
GO4S
GO4M
S20
Fitting system for outlets and union part
with set of wedges
2EM04
2EM04B
2EM04S
2EM04M
S1
Gutter bracket - bag of 5 pieces
5GB1
5GB1S
S1
Gutter corrugated roof
Bag of 5 pieces
5GO4
5GO4S
S1
Brackets in plastic bag
Catalog
4
Nota: shanks, stirrup, brackets for tile, etc... see p. 230
220
DRAINAGE FITTINGS
REF.
Grey
Please note: for socketed pipes, add the «p» to the basic product reference
Ex. : TD50 become TD50P
REF.
White
REF.
Sand
REF.
Brown
TD50B*
TD50S*
TD50M*
Packing Packaging
DOWNPIPE PROFILE
Pack of
10 lengths
(40 m)
GLUE
TD50*
Length 4 m Ø 50
SANITARY
SANITARY
Downpipe Ø 50
RAINGUTTERS
DOWNPIPE FITTINGS
Single socket coupling branch
BJ16GTB
BJ16GTS
BJ16GTM
S10
45°
CJ4GT
CJ4GTB
CJ4GTS
CJ4GTM
S10
67°30
CJ6GT
CJ6GTB
CJ6GTS
CJ6GTM
S10
87°30
CJ8GT
CJ8GTB
CJ8GTS
CJ8GTM
S10
Double socket pipe connector
JJGT
JJGTB
JJGTS
JJGTM
S10
ZJGT
ZJGTB
ZJGTS
ZJGTM
S10
CO50GTB
CO50GTS
CO50GTM
S10
Ventilation
BUILDING
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
Single socket bend
S50
Pipe brackets in plastic bag
Pipe clip with safety strap
Bag of 5 pieces
5CA50GT
5CA50GTS
S1
Rainwater shoe
RWS50
RWS50B
RWS50S
RWS50M
Nota: plug screws, see on page 157
221
ENVIRONMENT
RAINWATER SHOES
SAUL
AC50GT
Safety strap
HYDRAULIC
DRAINAGE CHANNELS
CO50GT
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
PIPE BRACKETS
Pipe clip
ACCES
TRAP DOOR
BJ16GT
à 67°30
CORNICHE SQUARE
ELITE LG30
RAINGUTTERS
Robust and stylish corniche square
raingutter.
Ideal for contemporary houses, the Elite corniche gutter can be installed
on all types of buildings. Versatile and functional, it offers optimal drainage
performance.
ADVANTAGES
Highly adaptable with 3 types of donwpipe (2 cylindrical,
1 rectangular).
Optimal drainage performance thanks to its half-round
shaped interior.
Long-lasting and resistant to thermal shock, UV
radiation and exposure to chemicals.
Strong, thanks to its reinforced double-wall design and
Catalog
4
invisible brackets.
222
50
DRAINAGE FITTINGS
SANITARY
GLUE
SANITARY
Elite LG30
Gutter profile
Used for
Characteristics
RAINGUTTERS
TECHNICAL FEATURES
Downpipe
Houses, Villa, block of flats, Industrial building.
ROOFING
ACCESSORIES
Robust and aesthetic
Shape
Assembly
Solvent welding
Material
Polyvinyl chloride
Round Ø 80 et Ø 100
Rectangular 73 x 100
Profile
Corniche square
Section
103 cm²
Ø 80 = 77 cm²
Ø 100 = 97 cm²
73 x 100 = 67,9 cm²
Ø 80 = 65 m²
Ø 100 = 100 m²
73 x 100 = 70 m²
BUILDING
Hydraulic capacity
ACCES
TRAP DOOR
FASCIA
AND ROOFING
SOFFIT BOARD
Measurements
Colours Ø 80:
Sand
Ventilation
White
Brown
Colours
White
Sand
Colours Ø 100:
Brown
White
Sand
White
Sand
Co-extrusion
Marking
This inside surface is partly All the profiles and fittings are
made of recycled PVC.
marked.
The outside surface is perfect
because it is made of new
PVC with a concentration of
pigments developed to resist to
ultra-violet rays.
THE NICOLL EXTRA
223
ENVIRONMENT
DID YOU KNOW ?
SAUL
Colours 73 x 100:
HYDRAULIC
DRAINAGE CHANNELS
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Brown
RAINGUTTER SYSTEMS
Corniche square Elite® solvent weld system
REF.
White
REF.
Sand
REF.
Brown
LG30B*
LG30S*
LG30M*
Pack of
5 lengths
(20 m)
Packing Packaging
GUTTER PROFILE
Length 4 m
GUTTER FITTINGS
RAINGUTTERS
Outlet Ø 80
NAD30B NAD30S NAD30M 5
Outlet Ø 100
NAD300B
NAD300S
NAD300M
5
Oulet 73 x 100
NAD307B
NAD307S
5
90° Angle
Internal
AIC30B
AIC30S
AIC30M
5
External
AEC30B
AEC30S
AEC30M
5
135° Angle
Internal
AIC305B
AIC305S
AIC305M
External
AEC305B
AEC305S
AEC305M
Expansion piece
BECF30B
BECF30S
BECF30M
Union part
JNC30B
JNC30S
JNC30M
C10
Right
FD30B
FD30S
FD30M
C10
Left
FG30B
FG30S
FG30M
C10
Right
FDC30B
FDC30S
FDC30M
C10
Left
FGC30B
FGC30S
FGC30M
C10
BHGB30S
BHGB30M
Gutter stopend
Stopend outlet
GUTTER BRACKET
BHGB30B
50
Catalog
4
Nota: shanks, stirrup, brackets for tile, etc... see p.253
224
DRAINAGE FITTINGS
REF.
Brown
Packing Packaging
DONWPIPE Ø 80 and Ø 100
Length 4 m Ø 80
TD80B*
TD80S*
TD80M*
Pack of 10
lengths (40 m)
Length 2 m Ø 80
TD802B*
TD802S*
TD802M*
Pack of 10
lengths (20 m)
Length 4 m Ø 100
TD100B
TD100S
TD100M
Pack of 5 lengths
(20 m)
SANITARY
REF.
Sand
GLUE
REF.
White
SANITARY
Downpipe ø 80 and ø 100 - Aesthetic range
Single socket 45° Ø 80 bend
Single socket à 45° Ø 100 bend
CR4GT1B
CR4GT1S
CR4GT1M
10
CT4GT1B
CT4GT1S
CT4GT1M
10
Single socket à 67°30 Ø 80 bend
CR6GT1B
CR6GT1S
CR6GT1M
10
CT6GT1B
CT6GT1S
CT6GT1M
10
CR8GT1B
CR8GT1S
CR8GT1M
10
CT8GT1B
CT8GT1S
CT8GT1M
10
Ø 80 Double socket pipe connector
Ø 100 Double socket pipe connector
JRGTB
JRGTS
JRGTM
10
JTGTB
JTGTS
JTGTM
10
Ø 80 Downpipe outlet
Ø 100 Downpipe outlet
JAM80B
JAM80S
JAM80M
5
JAM100B
JAM100S
JAM100M
5
Ø 80 rainwater hopper
Ø 100 rainwater hopper
BAO80B
BAO80S
BAO80M
5
BAO100B
BAO100S
BAO100M
5
PAF801S
PAF801M
5
ROOFING
ACCESSORIES
10
PAF801B
Ø 80 Leaf trap
Ventilation
LEAF TRAP Ø 80
RAINWATER COLLECTOR Ø 80
REPTD80B
REPTD80S
REPTD80M
B1
Ø 100 (fabricated piece)
REPF100B
REPF100S
REPF100M
B1
REP80B
REP80S
REP80M
B1
REP100B
REP100S
REP100M
B1
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Ø 80
Rainwater collector
Ø 80
Ø 100
REINFORCED BOTTOM DOWNPIPE Ø 80 et Ø 100
Traditional straight - 1 m Ø 80
DDF10RB
DDF10RS
5
Traditional with bend - 1 m Ø 80
DCF10RB
DCF10RS
5
Traditional straight - 1 m Ø 100
DDF10TB
DDF10TS
5
Traidtional with bend - 1 m Ø 100
DCF10TB
DCF10TS
5
PIPE BRACKET Ø 80 and Ø 100
Pipe bracket Ø 80 to clip
CORGT1B
CORGT1S
CORGT1M
S10
Pipe bracket Ø 100 to clip
COTGT1B
COTGT1S
COTGT1M
S10
RAINWATER SHOE Ø 80 and Ø 100
RWS801B
RWS801S
RWS801M
10
RWS1001B
RWS1001S
RWS1001M
10
225
ENVIRONMENT
NEW !
Rainwater collector new generation (fitting 26 x 34)
SAUL
10
BT16GT1M
FASCIA
AND ROOFING
SOFFIT BOARD
BR16GT1M
BT16GT1S
ACCES
TRAP DOOR
BR16GT1S
BT16GT1B
HYDRAULIC
DRAINAGE CHANNELS
BR16GT1B
BUILDING
Single socket 67°30 Ø 80 branch
Single socket à 67°30 Ø 100 branch
RAINGUTTERS
DOWNPIPE Ø 80 and Ø 100
RAINGUTTER SYSTEM
Downpipe ø 80
Please note:
Ex: TD80S becomes TD80PS.
REF.
White
REF.
Sand
REF.
Brown
Packing
Packaging
DOWNPIPE PROFILE
13
Length 4 m Ø 80
TD80B*
TD80S*
TD80M*
Length 3 m Ø 80
TD803B*
TD803S*
TD803M*
Length 2 m Ø 80
TD802B*
TD802S*
TD802M*
Pack of
10 lengths
(40 m)
Pack of
10 lengths
(30 m)
Pack of
10 lengths
(20 m)
* Packaged in a polyethylene sleeve in 10
RAINGUTTERS
DOWNPIPE FITTINGS*
14
Single socket branch
67°30
BR16GTB
BR16GTS
FRGT
FRGTS
Tampon
BR16GTM
10
10
Single socket Bend
15
20°
CR2GTB
CR2GTS
CR2GTM
10
16
45°
CR4GTB
CR4GTS
CR4GTM
10
17
67°30
CR6GTB
CR6GTS
CR6GTM
10
18
87°30
CR8GTB
CR8GTS
CR8GTM
10
45°
CR44GTB
CR44GTS
CR44GTM
10
67°30
CR66GTB
CR66GTS
CR66GTM
10
87°30
CR88GTB
CR88GTS
CR88GTM
10
Double socket bend
NEW !
24
26
Double socket coupling
JRGTB
JRGTS
JRGTM
10
ZRGTB
ZRGTS
ZRGTM
10
Downpipe outlet
JAM80B
JAM80S
JAM80M
5
Rainwater hopper
BAO80B
BAO80S
BAO80M
5
* See aesthetic fitting P.192
BEND SECTIONS
15°
SR1GTB
SR1GTS
SR1GTM
C10
30°
SR3GTB
SR3GTS
SR3GTM
C10
PAF801S
PAF801M
S1
LEAF TRAP
PAF801B
Leaf trap Ø 80
5
27
Traditional
Straight - length 1 m
DDF10RB
DDF10RS
5
With bend - length 1 m
DCF10RB
DCF10RS
5
PIPE BRACKETS
29
Flange
CORGTB
CORGTS
CORGTM
S10
Insert flange P.6/100
CORGA
CORGAS
CORGAM
S10
Pipe clip
Safety strap
CO80GTB
CO80GTS
AC80GT
S10
S25
Catalog
4
Pipe bracket in bag
226
Flange - bag of 2 piece
2CORGTS
S2
Pipe clip with safety strap - bag of 2 pieces
2CA8GTS
S2
50
DRAINAGE FITTINGS
Please note:
REF.
White
REF.
Sand
REF.
Brown
TD100S*
TD100M*
Pack of 5
lengths (20 m)
BT16GTM
10
Packing Packaging
13
TD100B*
Length 4 m Ø 100
GLUE
DOWNPIPE PROFILE
SANITARY
SANITARY
Downpipe ø 100
DOWNPIPE FITTINGS*
14 67°30 Single socket branch
BT16GTB
BT16GTS
15 20° Single socket bend
16 45° Single socket bend
CT4GTB
CT4GTS
CT4GTM
10
CT6GTB
CT6GTS
CT6GTM
10
CT8GTB
CT8GTS
CT8GTM
10
45° Double socket bend
CT44GTB
CT44GTS
67°30 Double socket bend
CT66GTB
CT66GTS
87°30 Double socket bend
CT88GTB
CT88GTS
21 Double socket coupling
JTGTB
JTGTS
JTGTM
10
ZTGTB
ZTGTS
ZTGTM
10
JAM100B
JAM100S
JAM100M
5
Rainwater hopper
BAO100B
BAO100S
BAO100M
5
Concentric Reducer
Ø 100/80
RE338GTB
RE338S
RE338M
C10
REP100M
B1
CT2GTS
RAINGUTTERS
ROOFING
ACCESSORIES
10
* See aesthetic fitting P.192
REP100B
REP100S
Traditional
Straight - length 1 m
DDF10TB
DDF10TS
5
With bend - length 1 m
DCF10TB
DCF10TS
5
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
27
PIPE BRACKETS
29 Pipe bracket
Pipe clip
COTGTB
COTGTS
CO100GT
C0100GTS
COTGTM
S10
AC100GT
Safety strap
S10
S25
Flange - bag of 2 pieces
Pipe clip with safety strap - bag of 2 pieces
2COTGTS
S2
2CA10GTS
S2
RAINWATER SHOE
rainwater shoe
RWS100
RWS100S
RWS100M
227
ENVIRONMENT
Pipe brackets in plastic bag
SAUL
Rainwater collector with tongue
Ventilation
RAINWATER COLLECTOR
ACCES
TRAP DOOR
FASCIA
AND ROOFING
SOFFIT BOARD
10
HYDRAULIC
DRAINAGE CHANNELS
NEW !
26 Downpipe outlet
10
CT66GTM
BUILDING
17 67°30 Single socket bend
18 87°30 Single socket bend
10
RAINGUTTER SYSTEMS
Downpipe 73 x 100
REF.
White
REF.
Sand
Packing
Packaging
PROFILE 73 x 100
TD70B*
Length 4 m
TD70S*
Pack of 10 lengths
(40 m)
DOWNPIPE FITTINGS
RAINGUTTERS
Single socket bend
45°
CQ4GTB
CQ4GTS
10
87°30
CQ8GTB
CQ8GTS
10
90° Direction change bend
CQ9GTB
CQ9GTS
10
ZQGTB
ZQGTS
Rectangular female fitting cylindrical male fitting
Ø 100 (downpipe P227)
MM170B
MM170S
10
Rectangular female fitting cylindrical male fitting
Ø 80 (downpipe P226)
MMR70B
MMR70S
10
DC107S
5
C10
Selection of adaptors
With bend
BRACKETS
Pipe clip
CO70GTB
CO70GTS
S10
Catalog
4
228
SAUL
HYDRAULIC
DRAINAGE CHANNELS
ENVIRONMENT
229
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Ventilation
ACCES
TRAP DOOR
BUILDING
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
RAINGUTTERS
GLUE
SANITARY
SANITARY
DRAINAGE FITTINGS
GENOESE bracket
RAINGUTTERS
In keeping with traditional architecture
In order to match the design of layered tile facades, Nicoll has developed
a unique invisible fastening system which integrates perfectly with the
gutter profile.
ADVANTAGES
Can be fastened to layereds, masonry or metal
cladding.
Integrated light system to compensate for the
tile overhang (adjustable up to 15 cm).
Gutter profile appearance is maintained.
Catalog
4
Easy and safe to install
230
231
SAUL
HYDRAULIC
DRAINAGE CHANNELS
ENVIRONMENT
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Ventilation
ACCES
TRAP DOOR
BUILDING
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
RAINGUTTERS
METAL ACCESSORIES
GLUE
SANITARY
SANITARY
DRAINAGE FITTINGS
METAL ACCESSORIES
SELECTION GUIDE
For each gutter, its accessories
Catalog
4
RAINGUTTERS
Nicoll offers a wide range of accessories to adapt to each guttering system.
REf.
CHARACTERISTICS
Brackets
HCC25
HCL25
HCL50
- Allows the installation of gutters on the
roof framework or the rafters.
- Available in 235 mm, 335 mm and
615 mm
Ovation®
bracket
HCC25VO
Twisted
bracket
HCH25
Ideal for renovations
- Allows the installation of gutters on the
side of the roof framework or rafters
without taking off the 1st row of tiles.
“Crocodile
type”
galvanized
bracket
EOALI
- Attachment to the corrugated plate on
which the tiles will be laid.
- Allows the installation of Ovation®
gutters on the roof framework or the
rafters.
Galvanized
bracket for
corrugated
plate under tile
ttachment to corrugated plate under
EOGCT - A
tile.
Galvanized
bracket for any
type of roof
EO70G
+
KEO
- Attachment to the ridge of the corrugated roof, the drainage channel is thus
perfectly clear.
Galvanized
bracket for
cement fibre
roofing
EFC70G
- Attachment to the ridge of the cement
fibre roof, the drainage channel is thus
perfectly clear.
Galvanized
bracket for
steel tile
roofing
EBA70G
- Attachment to the ridge of the metal tile
roof, the drainage channel is thus perfectly clear.
Galvanized
bracket for tiles
CT
Ovation®
galvanized
bracket for tiles
CTO
Bracket for
layereds
CG
Ovation®
and Vodalis®
bracket for
layereds
CGO
Nail bracket
CP
Snow brackets
232
CN25F
CN33F
Different approach for installation of the
gutter
- Attachment to the ridge of the tile,
the drainage channel is thus perfectly
clear.
gutter
- Attachment to the ridge of the tile,
the drainage channel is thus perfectly
clear.
gutter
- Compensation for the tile overhang: up
to 15 cm
- Aesthetics of the gutter profile and
secure installation.
gutter
- Compensation for the tile overhang: up
to 15 cm
- Aesthetics of the gutter profile and
secure installation.
- Attaches directly to the masonry.
- Allows the reinforcement of the gutter
profiles, 25 and 33.
PITCH
ADJUSTMENT
PVC BRACKAnd COMPATIBILITY
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
Yes
Gutter brackets, 28, 29 and 38
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
50 pcs per
box.
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
p.191,
Yes
Makes it possible to
50 pcs per compensate for differences 210, and
in thickness which may be
211
box.
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
50 pcs per
box.
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
50 pcs per
box.
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
50 pcs per
box.
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
50 pcs per
box.
Yes
Gutter brackets, 25, 28, 29, 30, 33, 38
and 70
50 pcs per
box.
Yes
Gutter brackets, 28, 29
and 38
Yes
Gutter brackets, 25, 29, 30, 33 and 70
Yes
Gutter brackets, 28, 29
and 38
Yes
Gutter brackets, 25, 28, 29, 30, 33,
and 38
50 pcs per
box.
No
Gutter profiles, 25 and
33
No
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
(Up to 6 cm)
BOLT
PERFORMANCE
ACCESSORIES
Yes
50 pcs per
box.
Yes
50 pcs per
box.
Yes
Pages
++
p.191,
210, and
211
++
p.198
and 200
++
p.191,
210, and
211
+++
from 3 to 38 mm
Yes
Yes
Yes
Yes
Yes
Yes
50 pcs per
box.
Yes
50 pcs per
box.
Yes
50 pcs per
box.
Yes
++
++ à +++
p.191,
210, and
211
p.191,
Reinforced with the use of
a KEO wedge allowing a 210, and
better distribution of stress
211
over the roofing element.
++ à +++
p.191,
210, and
211
++ à +++
p.191,
210, and
211
++ à +++
p.191,
+++
p.198
and 200
Reinforced with the use of
a KEO wedge allowing a 210, and
better distribution of stress
211
over the tile.
++++
The quality of the filling
of the layeReds must
be consistent enough to
support an attachment.
++++
The quality of the filling
of the layeReds must
be consistent enough to
support an attachment.
+
+
p.191,
210, and
211
p.200
and 250
p.191,
210, and
211
DRAINAGE FITTINGS
SANITARY
GLUE
SANITARY
SLATE
CEMENT
FIBRE
ROOFING
STEEL TILE
ROOFING
ROOFING
ACCESSORIES
TILES
Ventilation
MASONRY
233
SAUL
CORRUGATED
PLATE
FASCIA
AND ROOFING
SOFFIT BOARD
LAYERedS
ACCES
TRAP DOOR
TILES
Metal
roofing
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
ROOFING
FRAME
Corrugated
roofing
HYDRAULIC
DRAINAGE CHANNELS
RAFTERS
Flat roofing
BUILDING
PRODUCT
ILLUSTRATIONS
Roman tile roofing
ENVIRONMENT
Traditional roofing
frame (without fascia
and soffit systems)
RAINGUTTERS
WHICH FIXING DEVICES FOR
GUTTER BRACKETS?
Metal gutter accessories
Next generation
Building
NEW
STEEL PANEL
RAINGUTTERS
FIBRE CEMENT
GO25PFCM
GO25PBAM
GO33PFCM
GO33PBAM
Nicoll knows what those in the roofing business want and uses inovation to develop
new, direct fix gutter brackets which cater for all of your needs.
ADVANTAGES:
More convenient: slots in place with a single
blow of a hammer or mallet.
F
aster:
Reduces time needed to install
brackets.
T
ougher:
highly
resistant
to
corrosion.
Brackets have 2 times more pull-out resistance
compared to previous generations.
More
visually appealing: refined design,
Catalog
4
no visible fastenings.
234
DRAINAGE FITTINGS
Building
SANITARY
SANITARY
Metal gutter accessories
Next generation
DID YOU KNOW ?
RAINGUTTERS
GLUE
Nicoll’s new metal gutter brackets fasten directly to
the roof.
THE NICOLL EXTRA
INSTALLATION OF BRACKETS ON METAL ROOF
• Steel panel with a thickness of 0.63 to 0.75 mm, and a pitch of 10° to 45°
Ventilation
Fastened with ø 4,8
mm Ø self-drillling
screws in snow-prone
areas.
SALT SPRAY TEST
(1000 h):
HYDRAULIC
SURFACE DRAINAGE
DRAINGAE CHANNELS
PRODUCTS
Corrosion-resistant coating
of steel panel maintained
even with use of self-drilling
screws in snow-prone areas.
Slide the fastener onto the upper ridge and tap
it into place with the hammer
Fastened with ø 4,8 mm Ø selfdrilling in snow prone areas
235
ENVIRONMENT
• Fibre cement with a thickness of 6 to 6,5 mm, and a pitch of 10° to 45°
SAUL
INSTALLATION OF BRACKETS ON FIBRE CEMENT ROOF
HYDRAULIC
DRAINAGE CHANNELS
Slide the fastener onto the upper ridge and tap
it into place with the hammer.
BUILDING
SELECTION PRO
ACCES
TRAP DOOR
FASCIA
AND ROOFING
SOFFIT BOARD
ROOFING
ACCESSORIES
2 models for metal and fibre cement roofs
• 2 times more pull-out resistance than former brackets
• Hole for fastening with screw in snow-prone areas
• 25 x 2.5 mm strip made from new highly resistant flexible material
• New performed 15° angle for less manual adjustment
• Steel is hot dip galvanized after manufacture

4 - Nicoll

Transcription

Similar documents

Inżynier Utrzymania Ruchu – Elektryk

Would you rather be cleaning your gutters or

Rainwater Step by Step Installation Guide - GUTTERING

GutterWatch

ECLIPSE ECLIPSE

AmeriGuard - Home Specialists

Roof DRainage SyStemS Gutter Guards

Leaf Defier

Kessington before and after

Step by Step Installation Guide - RAINWATER DIVERTER