NSF flyer - NEES at Oregon State University
Transcription
NSF flyer - NEES at Oregon State University
George E. Brown, Jr. Network for Earthquake Engineering Simulation NEES @ Oregon State University Tsunami Research Facility - Civil Engineering Department NEES AT OREGON STATE UNIVERSITY The NEES equipment site at Oregon State University (nees@oregonstate) is home to the Tsunami Wave Basin - one of the world's largest facilities for studying the effects of large waves. Hosted at the O.H. Hinsdale Wave Research Laboratory, the facility consists of: • • a multidirectional tsunami wave basin a large wave flume This unique facility is one of the largest at an academic institution worldwide, and allows the study of tsunami-structure interaction, tsunami inundation and overland flow, tsunami debris flow and scour, harbor resonance, and landslide generated tsunamis. The multi-purpose wavemakers also allow the study of coastal engineering infrastructure and nearshore processes research. Host University Facility Name Department Laboratory Site URL Mailing Address Experimental facilities at nees@oregonstate are connected to the NEESgrid, allowing researchers to participate remotely, and supporting collaborations with other researchers, students and the public. Online tools make it possible to view live experiments, access archived data, and replay interesting phases of tsunami experiments. Major Equipment The multidirectional Tsunami Wave Basin measures 48.8 m (160 ft) long, 26.5 m (87 ft) wide and a maximum depth of 1.5 m (5 ft) with an additional 0.6 m (2 ft) freeboard. The 29-segment directional wavemaker has a maximum stroke of 2.1 m (6.9 ft) and a maximum velocity of 2.0 m/s (6.6 ft/s) and can produce a range of wave types, including periodic, random, tsunami, multi-directional and user-defined waves. Each segment is equipped with feedback control for active wave absorption. Supporting infrastructure includes a 7.5 ton gantry crane, instrumentation carriage spanning the basin width, unistrut imbedded in the basin walls and floor to secure models, and two 4.2 m (14 ft) wide access ramps. Steady flow currents can be installed on a project-specific basis. The Large Wave Flume is 104 m (342 ft) long, 3.7 m (12 ft) wide and 4.6 m (15 ft) deep. A hinged flap wave board generates periodic and random waves with a maximum wave height of 1.6 m (5.2 ft) at 3.5 sec. The nominal period range is 0.5 to 10 seconds, and the wave types include periodic, random, and user-defined waves. Active wave absorption is available to simulate the open boundary condition at sea and minimize re-reflection. Three instrumentation carriages are available. Carriage tow speed is up to 0.5 m/s (1.6 ft/s). Oregon State University Tsunami Research Facility Civil Engineering O.H. Hinsdale Wave Research Laboratory http://nees.oregonstate.edu OWEN 220 Oregon State University Civil Engr. Dept. Corvallis OR 97331 Instrumentation: A large inventory of conventional and state-of-the-art instrumentation measures free surface (up to 64 resistance-type surface piercing gages), velocity (up to 12 3-D acoustic-Doppler velocimeters), pressure (up to 40 transducers 0-5 psi), stress and strain (up to 50 channels), turbidity (up to 20 optical backscatter sensors), and depth (up to 64 component ultrasonic ranging system). Two modular PXI architecture data acquisition systems are available, each with built-in signal conditioning and antialiasing, 64 channel, 16-bit analog acquisition, 16 channel RS-232 serial data acquisition, and digital pulse generation. DAQs can be synched to provide 128/32 channel acquisition. Oregon State has developed a comprehensive information architecture to support remote users. The Tsunami Experiment Databank allows the broader research community to download and compare the results of previous tsunami experiments. Ongoing experiments are accessed using the Tsunami Experiment Notebook which offers researchers and students a simple, webbased interface giving access to: • • • • previous, current, and planned projects live data and video streaming experiment replay project reporting The Notebook includes graphic layouts of experimental set-up, sensor information, and a workspace for adding text and graphics similar to conventional lab notebooks. Revolutionizing our understanding of earthquake effects on man-made structures. RESEARCH The laboratory receives over 3,500 visitors annually. Through guided tours and hands on activities we strive to increase the interest of K-12 students in math, science, technology and to promote higher education as an option especially among women, underrepresented minorities and diverse socioeconomic backgrounds. Through our open house programs we invite the general public to view our research and increase public awareness of tsunamis and earthquake engineering. The facilities at nees@oregonstate are used for research including wave and wave-structure interactions. Key areas of research are the physical and numerical modeling of: • tsunami generation, propagation and run-up in 2- and 3-dimensions with or without breaking waves • mitigation of current and wave conditions in the design of jetties, seawalls • directional wave effects on structures • impact of tsunamis on structures Learn more about Tsunamis by visiting: http://nees.oregonstate.edu/ Outreach Highlight Research Highlight The EOT staff at the Tsunami Research Facility developed a hands-on, inquiry-based beach erosion activity designed to increase student understanding of coastal processes on landforms. The activity utilizes plastic tubs filled with water and sand. Students generate waves by mimicking the hinged flap wave board motion of the Large Wave Flume. Concurrent research underway in the Large Wave Flume introduces students to beach erosion modeling at different scales. Tsunami Wave Impact Forces on Cylinders. This project provides benchmark experimental data of wave impacts on cylinders. These data are important in the developl ment and validation of numerical models that can predict tsunami and other wave impact loads on structures such as bridges and buildings. The main cylinder is instrumented with pressure sensors and a load cell to measure pressure distribution around the cylinder as well as the impact of net force on the cylinder. Additional experiments are planned to investigate the wave impact forces that are affected by wave scattering and shadowing effects from multiple cylinders, commonly found, for example, with multiple bridge spans, piers, and other coastal structures. INTRODUCTION TO NEES NEES, the George E. Brown, Jr. Network for Earthquake Engineering Simulation, is a National Science Foundation sponsored consortium of 15 experimental facilities working toward engineering solutions to minimize damage to structures and loss of life from earthquakes. Construction of facilities began in 1999 culminating with the incorporation of NEESinc in 2004 to oversee operations and maintenance of facilities and management of consortium activities. EDUCATION, OUTREACH AND TRAINING (EOT) The Tsunami Research Facility complements Oregon State’s commitment to involve students at both graduate and undergraduate levels in projects. Courses taught in the College of Engineering and of Oceanic and Atmospheric Sciences relate to deterministic wave and tsunami loads, random waves and randomly generated tsunamis, nonlinear waves, and tsunami forces on coastal structures. The facility is a Research Experience for Undergraduates site for near shore science and hazard mitigation. Each summer faculty mentors and their graduate students work with undergraduates on active research projects, encouraging students to continue their graduate education. Many of the students become involved in ongoing tsunami research. NEES revolutionizes earthquake engineering research by the creation of a national network of experimental facilities with shared collaborative tools allowing remote participation and observation, a centralized data repository opening the exchange of data and information, and earthquake simulation software linking simulation with experimentation. These resources are part of the cyberinfrastructure linked by ultra-high-speed NEESgrid connections. Together, they provide collaboration and discovery in the form of more advanced research based on experimentation and computational simulations of the ways buildings, bridges, utility systems, coastal regions, and geomaterials perform during seismic events. Learn more at our website www.nees.org. NEES @ Oregon State University Principal Investigator CO-Principal Investigator Solomon Yim Dan Cox Cherri Pancake Harry Yeh NEES Consortium, Inc. 400 F Street Davis, California 95616 tel.: 530-757-NEES (6337) fax: 530-757-6340 email: info@nees.org Site Operations Manager Contact Person Melora Park Melora Park e: melora.park@oregonstate.edu t: 541.737.6147 NEES Consortium, Inc. is supported by the George E. Brown, Jr. Network for Earthquake Engineering Simulation (NEES) Program of the National Science Foundation under Award Number CMS-0402490. For more information please visit www.nees.org