A20Lab - 2wcom

Transcription

A20Lab - 2wcom
A20Lab
New control software for the
A20 / A20T FM Monitoring Decoder
See the status of your A20 at a glance
The A20Lab PC software* allows you to set up your A20 and to monitor
all parameters and measurement values your A20 is able to deliver. It will
be presented in a clear fashion and adding some extra benefits you probably
always wanted.
*This software is designed to run on MS-Windows (98 / 98SE / Me / 2000 / XP / Vista)
www.2wcom.com • contact@2wcom.com • Am Sophienhof 8 • 24941 Flensburg • Germany • Fon (+49) 461 - 66 28 30 - 0 • Fax (+49) 461 - 66 28 30 - 11
Brand new features added to the A20Lab
Level Meter
• Watch the RDS, RF and Pilot level
measurements shown graphically
• The valid range taken from the current
dataset is highlighted in the scale
• Watch the audio (internal and external)
and the MPX deviation shown
graphically as a bar
• The threshold value is marked in the
scale
• The peak value is held individually for a
specified time
• Each scale can be adjusted individually
by the user to cover a different range of
interest
Long-term MPX measurement
• Make long-term measurements of the
MPX power and deviation and watch it
as a time based graph
• Each scale can be adjusted individually
by the user to cover a different range of
interest
• The measured values can be saved as a
CSV file to be opened e.g. in a spreadsheet application or in a simple text
editor
www.2wcom.com • contact@2wcom.com • Am Sophienhof 8 • 24941 Flensburg • Germany • Fon (+49) 461 - 66 28 30 - 0 • Fax (+49) 461 - 66 28 30 - 11
Product highlights
Do everything you were able to do with the
A20Config software, but even better:
• Completely rewritten from the scratch taking into account
the feedback and wishes from users of the old A20Config software
• Permanent access to the input control including signal source,
frequency attenuation and the active dataset
• New sensitive JogDial for frequency tuning
• „LCD“ permanently showing the current source, the current dataset,
PI, PS, the block error rate, the current attenuation, the RF level and
the status of synchronization
• Instant visual feedback from changes done at the A20 directly
(change e.g. the frequency and A20Lab will show the changed
frequency in the „LCD“)
• In addition to the green/red LED showing the valid/invalid status
of a value you are able to see, if an alarm has already been signaled
or if a value is only temporarily out of range
• Well organized handling of datasets
• Well arranged grouping of associated user interface elements
• Combined rarely used general A20 setup items
(e.g. network configuration, MP3 settings etc.) into a separate dialog
• Many more enhancements to the general usability
• Now bundled with the new RDS Lab, the premium RDS decoder from the
2wcom team, giving you a far better RDS decoding experience and adding
new features like:
- Journal of RT and RT+ transmission
- Journal of traffic announcements
- Inspection of group data
www.2wcom.com • contact@2wcom.com • Am Sophienhof 8 • 24941 Flensburg • Germany • Fon (+49) 461 - 66 28 30 - 0 • Fax (+49) 461 - 66 28 30 - 11
Additional Screenshots
Locations / Devices tree
Monitoring page
RDS Data page
RDS Lab
Version: 02.09.2015
These data are subject to
modifications and amendments.
Errors excepted
www.2wcom.com • contact@2wcom.com • Am Sophienhof 8 • 24941 Flensburg • Germany • Fon (+49) 461 - 66 28 30 - 0 • Fax (+49) 461 - 66 28 30 - 11