Parker Push-Lok - Quick Coupling Division Europe

Transcription

Parker Push-Lok - Quick Coupling Division Europe
Parker Push-Lok® – complex hose assembly
in mould cooling was for yesterday!
The convenient Push-Lok® connections are now available
for tool-free hose assembly, including for a range of the major
couplings from the Rectus mould cooling product range.
The Parker Push-Lok® insert hose system is the fast, safe way
to assemble low-pressure hose lines easily and directly on-site.
Whether in production plants, service stations or maintenance
departments, Parker insert hose lines and couplings can be
assembled in seconds and with no tools or other aids such as
hose clamps, bands, clips or wires.
Technical Description
The advantages of these systems speak for themselves:
■
Profiles
tools needed for assembly
No
No crimp sleeves or hose clamps required
■ Unproblematic assembly on-site
■ Also suitable for vacuum applications
■ Resistant to many media such as air, water, hydraulic
fluids, lubricating oil, cold and frost protection agents
■
■
INTERNATIONAL
Series 86/87 International range
EUROPEAN
Series 10/11 European range
FRENCHMATIC I
Series 6006/6009 Frenchmatic range
■
Temperature Range
- 15°C to +200°C (FKM) depending on the medium and the
resistance of the hose.
A special design is required for temperatures under
-15°C and over +200°C (on request).
■
Valve variants available
Single shut-off (series 86/87/10/11/6006/6009)
Double shut-off (series 86/87/10/11/6006/6009)
Straight-through (series 86/87/10/11)
Further detailed information and a summary of the
available Push-Lok® hoses can now be obtained
from your Parker sales representative.
Push-Lok®
Hose Connection
Couplings with the Push-Lok® connection are available in
three connection variants (straight, 45°, 90°). They can therefore
be used in almost any installation situation with no problem.
International
Push-Lok®
45°
90°
Nominal
Diameter
Series
6
6
Connection
Push-Lok® *
Push-Lok®
45°*
Push-Lok®
90°*
86
6 mm
TP
PH
PR
86
10 mm
TP
PH
PR
9
87
10 mm
TP
PH
PR
9
87
13 mm
TP
PH
PR
Nominal
Diameter
Series
Connection
Push-Lok® *
Push-Lok®
45°*
Push-Lok®
90°*
6
10
6 mm
TP
PH
PR
6
10
10 mm
TP
PH
PR
9
11
10 mm
TP
PH
PR
9
11
13 mm
TP
PH
PR
Nominal
Diameter
Series
Connection
Push-Lok® *
Push-Lok®
45°*
Push-Lok®
90°*
6
6006
6 mm
TP
PH
PR
6
6006
10 mm
TP
PH
PR
9
6009
10 mm
TP
PH
PR
9
6009
13 mm
TP
PH
PR
EUROPEAN
45°
Push-Lok®
90°
FRENCHMATIC I
Push-Lok®
45°
90°
* Order code
Push-Lok® connections for plugs on request.
Parker Push-Lok® connections are compatible only with Parker Push-Lok® plug-in hoses.
Order code – key:
■
E.g. for series 86
Part number:
86
KB
TP
06
M
V
X
Series
Valve
Push-Lok®
Connection
Material
Seal
Surface
straight= TP
45° = PH
90° =PR
Parker Hannifin Manufacturing Germany GmbH & Co. KG
Quick Coupling Division Europe | Daimlerstr. 7 | 71735 Eberdingen / Germany | Phone: +49 7042 100 0 | Fax: +49 7042 100 147 | info@rectus.de | www.rectus.de

Similar documents

Rectus Mould Couplings - Quick Coupling Division Europe

Rectus Mould Couplings - Quick Coupling Division Europe 2.2 Fluid compatibility: quick connect couplings selection must assure compatibility of the body and seal materials with the fluid media used. See the fluid compatibility chart. 2.3 Temperature: be...

More information

Product Overview (english)

Product Overview (english) ■ Mechanical design ■ Chemical architecture ■ Electrical and electronic design ■ Embedded vs. removable battery For further information please visit www.varta-storage.com ■ Certification and testing

More information