TANDEM CASTER WHEEL REPAIR KIT INSTRUCTIONS

Transcription

TANDEM CASTER WHEEL REPAIR KIT INSTRUCTIONS
SII058_Layout 1 7/19/2012 4:21 PM Page 1
TANDEM CASTER WHEEL REPAIR KIT INSTRUCTIONS
WARNING: Failure to install the tandem caster wheel repair kit could result in your stroller tipping.
1
Your Repair Kit contains two front wheels. Follow the
instructions below for correct installation.
STEP 1 - Remove the front wheel by pressing the
button, as shown and pulling the wheel off.
2
STEP 2 - Attach the new front wheel provided in the
Repair Kit and push into the front wheel location until a
“click” is heard. Tug firmly on the wheel to be sure it is
securely in lace.
Repeat the same operations for the other wheel.
SII058 7/12
SII057_Layout 1 7/19/2012 4:20 PM Page 1
NUT REPAIR KIT INSTRUCTIONS
WARNING: Failure to install the Nut repair kit could result in the nut falling off and becoming a choking hazard for your child.
1
Your repair kit contains two Nylon-lock nuts. Follow the
instructions below for correct installation.
3
STEP 3 - Attach the new nylon-lock nut by fingers only.
STEP 1 - Remove the rear side of the Cargo Basket, by
detaching the snap buttons.
2
STEP 2 - Remove the exposed nut by using a wrench.
4
STEP 4 - Use a wrench to tighten the nut until flush with
the bolt end. Repeat this operation for the other side of
the stroller.
STEP 5 - Re-attach the cargo basket, using the snap
buttons.
SII057 7/12