Aquatrex Large Diameter Filter

Lenntech
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
Aquatrex* Large Diameter Filter
This product is ideally suited to be used in AMETEK's
Big Blue and Keystone's Blue Giant housing units.
(Blue Blue is a trademark of US Filter/Siemens. Blue
Giant is a trademark of Metpro Keystone Filter Division.) The LD filter has pure FDA compliant polypropylene construction, and is manufactured using ISO
9001 certified process.
Typical Applications
Figure 1: Aquatrex Filters
Description and Use
Aquatrex* Filters combine innovative depth filter
technology, quality cost effectiveness to provide
excellent filtration value in residential and light
commercial applications.
•
Whole House Filtration
•
Spa and Pool Filtration
•
Restaurant and Food Service
•
Water Filtration
General Properties
High Dirt-Holding Capacity
•
Unique dual-graded density design of the extended media captures particles throughout entire filter depth
•
High dirt-holding capacity means longer life and
fewer change-outs, which translates into
money saved
•
Precision final filter results in consistent highperformance filtration
•
Large media area allows for high flow rates
(Maximum recommended flow rate is 10 gpm
for 10, 20, 30, and 50 microns, 5 gpm for 1, and
5 microns per 10-inch length. Change-outs recommended at 25 psid)
Expanding its Product Line
GE Water & Process Technologies is continuing to
expand its product line to meet current market
demand with the introduction of our new large
diameter (LD) filter. Manufactured with our worldrenowned Meltblown Microfibers Technology, the
engineered gradient density feature of this cartridge provides exceptional dirt-holding capacity
and unequaled life compared to our equivalent
rated standard filters. The LD filter, with its three to
eight times greater dirt-holding capacity and life,
will reduce change-out frequency, adding more
value in applications where high capacity and
infrequent change-outs are desired.
Table 1: High Flow Rate at Low Pressure Drop1
Material and FDA Compliance
Aquatrex large diameter cartridge filters are made
from thermally-welded blown microfibers of polypropylene. GE certifies that the resin used for manufacturing the filter media of this product
meets the requirements of the Food and Drug
Administration (FDA) Title 21 of the Code of Federal
Regulations (CFR) 174.5 and relevant subparts
of 177.
Important Notice To User:
1 Data
based on 10” length filter with clean water
Pure Polypropylene Construction
•
Thermally-bonded microfibers for positive dirt
retention
•
High-purity polypropylene media has no wetting
agents, solvents, antistatic agents or binders
•
Wide chemical compatibility
•
Temperatures to 150ºF (65°C)
•
Meets the requirements of the FDA Title 21 of
The Code of Federal Regulations 174.5 and
relevant subparts of 177.
Proven Manufacturing Process
•
Automated, consistent manufacturing process
ensures reliable performance and repeatable
results
•
Large diameter filter manufacturing is ISO 9001
certified assuring continuous product quality
The following is made in lieu of all other warranties
expressed or implied. Manufacturer’s and Seller’s
only obligation shall be to issue credit against the
purchase or replacement of the product proved to
be defective in material or workmanship. Neither
Manufacturer nor Seller shall be liable for any
injury, loss or damage, direct or indirect, special or
consequential, arising out of the use of, misuse, or
the inability to use such product. The information
contained herein is based on technical data and
tests which we believe to be reliable and is
intended for use by persons having technical skill at
their discretion and risk. Since conditions of use are
outside GE’s control, we can assume no liability
whatsoever for results obtained or damages
incurred through the application of the data presented. This information is not intended as a license
to operate under, or a recommendation to infringe
upon, any patent of or others covering any material
or use. The foregoing may not be altered
except by a written agreement signed by officers of
the Manufacturer.
Ordering Information
When Ordering GE LD filter cartridges please select
a micron rating and a length (Table 2). Example: LD
10-9.875
Table 2: Ordering Information
Page 2
Lenntech
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
FS1099EN
Large Diameter ‐series cartridge filters are all the models that are potentially possible in all variations.
e that not all models are actually produced or on stock and some model numbers and names have become obsolete.
ss this should help as cross reference table chart for Cuno filters nomenclature.
Aquatrex LD
LD01‐10
LD01‐20
LD05‐10
LD05‐20
LD10‐10
LD10‐20
LD20‐10
LD20‐20
LD30‐10
LD30‐20
LD50‐10
LD50‐20
LD01‐9.875
LD01‐20
LD05‐9.875
LD05‐20
LD10‐9.875
LD10‐20
LD20‐9.875
LD20‐20
LD30‐9.875
LD30‐20
LD50‐9.875
LD50‐20
WP series
LD‐01‐10
LD‐01‐20
LD‐05‐10
LD‐05‐20
LD‐10‐10
LD‐10‐20
LD‐20‐10
LD‐20‐20
LD‐30‐10
LD‐30‐20
LD‐50‐10
LD‐50‐20
WP1BB97P
WP5BB97P
WP10BB97P
WP25BB97P
WP1BB20P
WP5BB20P
WP25BB20P
WP1‐BB97P
WP5‐BB97P
WP10‐BB97P
WP25‐BB97P
WP1‐BB20P
WP5‐BB20P
WP2‐5BB20P
WP1‐BB‐97P
WP5‐BB‐97P
WP10‐BB‐97P
WP25‐BB‐97P
WP1‐BB‐20P
WP5‐BB‐20P
WP25‐BB‐20P
1238935
1238934
1238933
1238932
1238939
1238938
1238937
1238936
1238943
1238942
1238941
1238940
1238947
1238946
1238945
1238944
1238951
1238950
1238949
1238948
1238955
1238954
1238953
1238952
1238960
1238959
1238958
1238957
1238964
1238963
WP.Zs 20‐19 1/2
WP.Zs 10‐19 1/2
WP.Zs 05‐19 1/2
WP.Zs 01‐19 1/2
WP.Zs 20‐20
WP.Zs 10‐20
WP.Zs 05‐20
WP.Zs 01‐20
WP.Zs 20‐29 1/4
WP.Zs 10‐29 1/4
WP.Zs 05‐29 1/4
WP.Zs 01‐29 1/4
WP.Zs 20‐30
WP.Zs 10‐30
WP.Zs 05‐30
WP.Zs 01‐30
WP.Zs 20‐40
WP.Zs 10‐40
WP.Zs 05‐40
WP.Zs 01‐40
WP.Zs 20‐19 1/2 XK
WP.Zs 10‐19 1/2 XK
WP.Zs 05‐19 1/2 XK
WP.Zs 01‐19 1/2 XK
WP.Zs 20‐20 XK
WP.Zs 10‐20 XK
WP.Zs 05‐20 XK
WP.Zs 01‐20 XK
WP.Zs 01
20 XK
WP.Zs 20‐29 1/4 XK
WP.Zs 10‐29 1/4 XK
Hurricane
S1 series
ECP series
PP series
Hytrex
HC‐40‐0.35
HC‐40‐035
HC‐40‐1
HC‐40‐5
HC‐90‐1
HC‐90‐5
HC40‐0.35
HC40‐035
HC40‐1
HC40‐5
HC90‐1
HC90‐5
HC400.35
HC40035
HC401
HC405
HC901
HC905
S1‐20BB
S1‐20‐BB
S120BB
S120‐BB
ECP5‐BB
ECP5‐20BB
ECP5BB
ECP520BB
ECP‐5‐BB
ECP‐5‐20BB
ECP‐5BB
ECP‐520BB
ECP‐5‐20‐BB
ECP‐5‐BB
ECP‐520‐BB
PP30‐BB
PP‐30‐BB
PP30BB
PP‐30BB
GX10‐9‐3/4
GX05‐9‐3/4
GX01‐9‐3/4
GX05‐9‐7/8
GX01‐9‐7/8
GX10‐10
GX05‐10
GX01‐10
GX10‐20
GX05‐20
GX01‐20
Purtrex GX‐10‐9‐3/4
GX‐05‐9‐3/4
GX‐01‐9‐3/4
GX‐05‐9‐7/8
GX‐01‐9‐7/8
GX‐10‐10
GX‐05‐10
GX‐01‐10
GX‐10‐20
GX‐05‐20
GX‐01‐20
PX10‐9‐3/4
PX05‐9‐3/4
PX01‐9‐3/4
PX05‐9‐7/8
PX01‐9‐7/8
PX10‐10
PX05‐10
PX01‐10
PX10‐20
PX05‐20
PX01‐20
PX05‐30