aptub_001_catalogo_05_ma copy

Transcription

A melhor opção em soluções
tubulares para exploração, produção
e condução de petróleo e gás.
The best tubular solutions for the
exploration, production and
conduction of oil and gas.
Abril 2015 | April 2015
Tubing | Casing | Line Pipe
História | History
Certificados | Certificates
Inspeções e ensaios não destrutivos | Inspection - Non Destructive tests (OCTG)
Fluxo de produção e controle de qualidade | Manufacturing and quality control flow Diagram
OCTG
Tolerâncias de comprimento - Casing/tubing (joint) | Range Lengths - Tubing/casing (joint)
Resumo das inspeções aplicáveis | Inspection summary
Dimensões e propriedades de desempenho (tubing) | Dimensions and performance properties (tubing)
Dimensões e propriedades de desempenho (casing) | Dimensions and performance properties (casing)
Tolerâncias de comprimento - Pup Joint | Range lengths - Pup Joint
Composição química (porcentagem de fração em massa) | Chemical Composition (mass fraction)
Requisitos para propriedades mecânicas (ensaio de tração e dureza) | Tensile and hardness requeriments
LINE PIPE
Requisitos para propriedades mecânicas (ensaio de tração) | Tensile requirements
Requisitos para ensaio charpy - PSL2 | Charpy Test Requirements - PSL2
Dimensões e pressões para teste hidrostático | Dimensions and hydrostatic test pressure
Fluxo de produção e controle de qualidade | Manufacturing and quality control flow Diagram
Conexões | Connections
Revestimentos | Coatings
NBR
Requisitos para propriedades mecânicas (ensaio de tração) | Tensile requirements
Dimensões DIN EN 10255 | Dimensions DIN EN 10255
Dimensões ASTM A53 e NBR 5590 | Dimensions ASTM A53 e NBR 5590
Dimensões NBR 5580 | Dimensions NBR 5580
Dimensões NBR 6591 | Dimensions NBR 6591
Rastreabilidade | Traceability
Conversões métricas | Metric Conversions
2
5
7
8
9
9
10
12
16
16
16
18
21
21
22
26
27
27
29
29
29
30
31
32
34
36
Resistência e tecnologia de ponta.
Apolo Tubulars é uma empresa focada na produção de tubos de aço de alta
qualidade, soldados por indução de alta frequência (HFIW), para a indústria
de petróleo, gás e outros segmentos do setor de energia.
Atualmente, a planta industrial da Apolo Tubulars tem capacidade instalada
para produzir 120 mil toneladas de tubos por ano, distribuídos em produção e
exploração (OCTG) e produção de tubos de condução (line pipe).
A empresa atende aos mais diversos consumidores por meio de uma extensa
e bem desenvolvida rede de distribuição.
Resistance and State-of-the-art technology
Apolo Tubulars is a company focused on producing high quality steel pipes
making use of the high-frequency induction welding (HFIW) process,
designed for the oil, gas and other energy industry segments.
Currently, Apolo Tubulars industrial plant has installed capacity to
manufacture 120,000 tons of tubular products per year, between production
and exploration (oil country tubular goods - OCTG) and line pipe.
The company now is able to meet the needs of many types of consumers
through an extensive and well-developed distribution network.
CONFIABILIDADE
RELIABILITY
A Apolo Tubulars é uma empresa comprometida com
qualidade e responsabilidade social, que investe
continuamente em capacitação técnica, segurança e
diversificação do seu portfólio de produtos. Devido a
esse comprometimento e a confiabilidade de seus
produtos, a empresa ocupa um lugar de destaque
como um dos grandes fornecedores de soluções
tubulares para Petróleo e Gás, com total capacidade
de atender às crescentes exigências deste mercado.
Apolo Tubulars is a company committed to high
standards of quality and social responsibility, and it
invests continually in technical capacitance, safety
and diversification of its portfolio's products. Due to
this commitment and the reliability of its products,
the company currently occupies a spotlight as one of
the biggest suppliers of tubular solutions to the oil
and gas sector in Brazil, being fully capable of
attending the growing demands of this market.
Segurança e Qualidade
Safety and Quality
Investimentos em equipamentos de última geração
e infraestrutura fabril
Investments in the latest generation equipment
and manufacturing infrastructure
Constante capacitação e transferência de tecnologia
Constant training and technology transfer
Testes não destrutivos em todas as fases do processo
(ultra som, EMI, partículas magnéticas, UT full body)
Non-Destructive Tests in every step of the process
(ultrasound, EMI, MPI, UT Full-Body)
Testes hidrostáticos até 20.000 psi
Hydrostatic tests up to 20.000 psi
Testes laboratoriais (tração, metalografia, dureza, charpy,
composição química, high colapse e burst test)
Laboratory tests (tensile, metallography, hardness, charpy,
chemical composition, high collapse and burst test)
Pronta para o futuro.
Pronta para o Brasil.
Ready for the future.
Ready for Brazil.
Sistema de Gestão da Qualidade com certificações
ISO 9001 e API SPECQ1
Quality Management System with ISO 9001 and API SPECQ1
Processos de fornecimento e fabricação certificados
(normas API 5L e API 5CT, DNV, NACE e CRCC Petrobras)
Supply and manufacturing process certificates
(API 5L and API 5CT, DNV, NACE and CRCC Petrobras rules)
04
CATÁLOGO DE PRODUTOS APOLO TUBULARS
Todas essas ações fazem do tubo Apolo um produto
de alta qualidade com 100% de aprovação.
All of these actions lead to a 100% approval rating
for Apolo's high quality tubular products.
CERTIFICADOS
CERTIFICATES
API 5L
API 5CT
NBR 5580
NBR 5590
BUREAU VERITAS - BURST TEST
ISO 9001
CRCC PETROBRAS
05
API 5CT
Tubos e tubos curtos (pup joints) fornecidos com extremidades roscadas com luva
(casing e tubing) ou com upset (tubing) para aplicações em revestimento e
produção de poços terrestres e marítimos. Fornecidos também com ou sem
tratamento térmico a fim de atender às exigências da indústria petroleira.
Pipes and pup joints threaded & coupled (casing and tubing) or with upset (tubing),
for applications on exploration and production in onshore and offshore wells. They
are also supplied with or without heat treatment in order to meet the requirements
of oil industry.
06
INSPEÇÕES E ENSAIOS NÃO DESTRUTIVOS
INSPECTION AND NON DESTRUCTIVE TESTS
Supplemental inspection to the emi equipment, aiming to
detect possible imperfections geometrically unfavorable
to the eletromagnetic technique.
Eletromagnetic inspection for the detection of
longitudinal and transversal imperfections.
Manufacturer: tuboscope gmbh
Model: ENDSONIC II
4 angular transducers directed to the monitoring of the
weld zone.
Manufacturer: tuboscope
Speed: 12 up to 26 meters per minute.
16 longitudinal sensors
4 up to 16 transversal sensors
2 magnetization coils, one longitudinal and one
transversal.
EMI
Sea 1 / sea 2
SEMI-AUTOMATIC UT
Fluorescent magnetic particle inspection of
the pipe ends.
Simultaneous pulsing magnetization in two
directions.
Evaluation of the indications from
ultra sound or emi.
Portable equipment
Model: ex: USM-35XDAC
Manufacturer: krautkramer
Angular transducers: 45°, 60° or 70°.
Yoke - alt. Current and wet magnetic
particles
Manufacturer: tuboscope
External inspection: 18" from the pipe end.
Internal inspection: 18" (or two times the
diameter for smaller measurements).
PROVE-UP UT/MP
SEA 1
Ut at pipe ends (A e B)
Inspection of the pipe ends.
B
A
Portable equipment
Model: ex: USM-35XDAC
Manufacturer: krautkramer
Angular transducers: 45°, 60° or 70°.
07
FLUXO DE PRODUÇÃO E CONTROLE DE QUALIDADE
MANUFACTURING AND QUALITY CONTROL FLOW DIAGRAM
Coil reception
and inspection
Trimming of
the weld seam
Flattenning test
and laboratory test
Uncoiling
Visual and dimensional
inspection of strip
Slitter
Ultrasonic inspection
(process)
Stamp
Annealing
Emulsion cooling
after air cooling
inspection of pipe
Facing
Upset furnace
(tubing)
Induction Furnace
(austenitizing temperature)
Flattening test and
laboratory test
Coupling and
bucking
08
Air cooling
Drift Test
Welding - HIFW
Forming
Sizing and
straightening
Straightener
Cutting to
individual length
Hidrostatic test
(prove up)
Upsetter (tubing)
Water cooling
(quenched)
Hydrostatic test
Full body: EMI/UTWL
Marking and
weighting
Induction Furnace
(tempering temperature)
SEA Magna
Flux/UTWL
Varnishing
Hot Straightener
Threading
Packing
inspection of threading
Loading and
delivery
OCTG
TOLERÂNCIAS DE COMPRIMENTO - CASING / TUBING (JOINT)
RANGE LENGTHS - TUBING / CASING (JOINT)
Range 1
Max.
Min.
Min.
Range 2
Max.
Min.
Max.
Min.
Max.
m
m
ft
ft
m
m
ft
ft
Tubing
6,10
7,32a
20.0
24,0a
Tubing
8,53
9,75b
28.0
32.0b
Casing
4,88
7,62
16.0
25,0
Casing
7,62
10,36
25.0
34,0
Range 3
Min.
m
Max.
m
Min.
ft
Max.
ft
11,58
c
Tubing
12,80
38.0
42.0
10,36
13,50
34.0
44.3
Casing
a
By agreement between purchaser and manufacturer, the
maximum length may be increased to 8,53 m (28.0 ft).
b
c
c
RESUMO DAS INSPEÇÕES APLICÁVEIS
INSPECTION SUMMARY
Grade
Chemical
Properties
Tensile
Tests
Impact
Tests
Hardness
Tests
Dimensional
Testing
Flattening
Test
H40
X
X
-
-
X
X
J55
X
X
-
-
X
X
K55
X
X
-
-
X
X
N80Q
X
X
X
-
X
X
2
L80-1
X
X
X
X
X
X
3
P110
X
X
X
-
X
X
Group
1
Drift Tests
Hydrostatic
Tests
Ultrasonic
Inspection
(Weld Seam)
Electromagnetic
Inspection
(Pipe Ends)a
Magnetic
Particles
Inspection
(Pipe Ends)a
Ultrasonic
Inspection
(Pipe Ends)a
X
X
X
-
-
-
X
X
X
X
-
-
-
X
X
X
X
-
-
-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NOTE: aRequirements applicable for pipes full-length heat-treated.
NDE Inspection level according to API 5CT
09
DIMENSÕES E PROPRIEDADES DE DESEMPENHO (TUBING)
DIMENSIONS AND PERFORMANCE PROPERTIES (TUBING)
10
Size
Oustide Diameter
inch
inch
2 3/8
Inside Diameter
Drift Diameter
Wall Thickness
Label
mm
inch
mm
NU
lb/ft
EU
lb/ft
1.947
49,46
0.167
4,24
4.00
-
50,67
1.901
48,28
0.190
4,83
4.60
4.70
2.441
62,00
2.347
59,62
0.217
5,51
6.40
6.50
73,02
2.323
59,00
2.229
56,62
0.276
7,01
7.80
7.90
3.500
88,90
3.068
77,93
2.943
74,74
0.216
5,49
7.70
-
3 1/2
3.500
88,90
2.992
76,00
2.867
72,82
0.254
6,45
9.20
9.30
3 1/2
3.500
88,90
2.922
74,22
2.797
71,04
0.289
7,34
10.20
-
4 1/2
4.500
114,30
3.958
100,54
3.833
97,36
0.271
6,88
12.60
12.75
4 1/2
4.500
114,30
3.826
97,18
3.701
94,00
0.337
8,56
15.20
-
mm
inch
mm
2.375
60,32
2.041
51,84
2 3/8
2.375
60,32
1.995
2 7/8
2.875
73,02
2 7/8
2.875
3 1/2
inch
OCTG
Nominal Linear Masses
lb/ft
Grade
kg/m
3.94
5,86
4.44
6,61
6.16
9,17
7.66
11,41
7.59
11,29
8.81
13,11
9.92
14,76
12.25
18,22
15.00
a
22,32
NU
lb
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
30,100
41,400
60,200
60,200
36,000
49,400
71,900
71,900
98,900
52,800
72,600
105,600
105,600
145,200
140,900
140,900
193,700
65,100
89,500
130,200
130,200
79,600
109,400
159,100
159,100
218,800
92,600
127,300
185,100
185,100
104,400
143,500
208,700
208,700
-
Joint Yield Strengthb
EU
EU Special
Regular
Clearance
lb
52,200
71,700
104,300
104,300
143,400
72,500
99,700
145,000
145,000
199,300
180,300
180,300
247,900
103,600
142,500
207,200
207,200
284,900
144,000
198,500
288,500
288,500
-
Collapse
Resistanceb
Internal Yield
Pressureb
(Pipe body)
lb
psi
psi
52,200
71,700
104,300
104,300
143,400
72,500
99,700
145,000
145,000
199,300
180,300
180,300
247,900
103,600
142,500
207,200
207,200
284,900
-
5,230
7,190
9,980
9,980
5,890
8,100
11,780
11,780
16,130
5,580
7,680
11,170
11,170
14,550
13,890
13,890
19,090
4,630
5,970
7,870
7,870
5,380
7,400
10,540
10,540
13,530
6,060
8,330
12,120
12,120
4,490
5,730
7,500
7,500
11,080
-
4,920
6,770
9,840
9,840
5,600
7,700
11,200
11,200
15,400
5,280
7,260
10,570
10,570
14,530
13,440C
13,440C
18,480C
4,320
5,940
8,640
8,640
5,080
6990
10,160
10,160
13,970
5,780
7,950
11,560
11,560
4,220
5,800
8,430
8,430
10,480
-
Type of
End-finish
PN
PN
PN
PN
PNU
PNU
PNU
PNU
PNU
PNU
PNU
PNU
PNU
PNU
PNU
PNU
PNU
PN
PN
PN
PN
PNU
PNU
PNU
PNU
PNU
PN
PN
PN
PN
PNU
PNU
PNU
PNU
P
-
NOTE: a Nominal linear
masses are shown for
information only and do
not consider mass gain
or loss due to end
finishing.
b
According to API TR
5C3 - 2008
c
Internal Yield
Pressure for pipe body
and connection are the
same, except for these
items, verify API TR 5C3
2008 - Table L4.
LEGEND:
NU = Non-upset tubing
connection
EU = External upset
tubing connection
P = Plain End
N = Non-upset
threaded and coupled
U = External upset
threaded and coupled.
11
DIMENSÕES E PROPRIEDADES DE DESEMPENHO (CASING)
DIMENSIONS AND PERFORMANCE PROPERTIES (CASING)
12
Inside Diameter
Drift Diameter
Size
Oustide Diameter
inch
inch
mm
inch
mm
4 1/2
4.500
114,30
4.090
103,88
3.965
100,70
-
4 1/2
4.500
114,30
4.052
102,92
3.927
99,74
4 1/2
4.500
114,30
4.000
101,60
3.875
4 1/2
4.500
114,30
3.920
99,56
4 1/2
4.500
114,30
3.826
5 1/2
5.500
139,70
5 1/2
5.500
5 1/2
Regular
inch
mm
Alternative
inch
mm
Wall Thickness
Label
inch
mm
lb/ft
-
0.205
5,21
9.50
-
-
0.224
5,69
10.50
98,42
-
-
0.250
6,35
11.60
3.795
96,38
-
-
0.290
7,37
13.50
97,18
3.701
94,00
-
-
0.337
8,56
15.10
5.012
127,30
4.887
124,12
-
-
0.244
6,20
14.00
139,70
4.950
125,74
4.825
122,54
-
-
0.275
6,98
15.50
5.500
139,70
4.892
124,26
4.767
121,08
-
-
0.304
7,72
17.00
5 1/2
5.500
139,70
4.778
121,36
4.653
118,18
-
-
0.361
9,17
20.00
7
7.000
177,80
6.538
166,06
6.413
162,88
-
-
0.231
5,87
17.00
OCTG
a
lb/ft
14,02
10.24
15,24
11.36
16,90
13.06
19,43
15.00
22,32
20,41
15.35
22,84
16.88
25,13
19.83
16.72
LTC
BTC
lb
lb
lb
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
77,000
101,000
112,000
132,000
146,000
154,000
170,000
130,000
172,000
189,000
202,000
222,000
229,000
252,000
122,000
-
162,000
180,000
212,000
223,000
279,000
275,000
270,000
338,000
406,000
217,000
239,000
247,000
272,000
338,000
348,000
445,000
416,000
428,000
548,000
-
203,000
249,000
225,000
277,000
291,000
304,000
385,000
334,000
349,000
443,000
509,000
300,000
366,000
329,000
402,000
428,000
446,000
568,000
503,000
524,000
667,000
-
kg/m
9.42
13.71
Grade
STC
29,52
24,89
Internal Yield
Pressureb
(Pipe body)
Type of
End-finish
psi
psi
psi
2,760
3,310
4,010
4,010
4,960
4,960
6,350
6,350
7,580
8,540
8,540
10,690
14,340
2,620
3,120
3,120
4,040
4,910
4,910
6,290
6,290
7,480
8,830
8,830
11,100
1,420
-
3,180
4,380
4,790
4,790
5,350
5,350
7,780
7,780
10,690
9,020C
9,020C
12,140C
14,420C
3,110
4,270
4,270
4,810
5,320
5,320
7,740C
7,740C
10,640C
9,190C
9,190C
12,640C
2,310
-
PS
PS
PS
PSB
PSB
PSLB
PSLB
PLB
PLB
PLB
PLB
PLB
PLB
PLB
PS
PS
PS
PSLB
PSLB
PSLB
PSLB
PLB
PLB
PLB
PLB
PLB
PLB
PS
-
Collapse
Resistanceb
NOTE:
a
Nominal linear masses
are shown for
information only and do
not consider mass gain
or loss due to end
finishing.
b
According to API TR
5C3 - 2008
c
Internal Yield Pressure
for pipe body and
connection are the
same, except for these
items, verify API TR 5C3
2008 - Table L4.
LEGEND:
STC = Short roundthread casing
LTC = Long roundthread casing
BTC = Buttress
thread casing
P = Plain End
S = Short round-thread
L = Long round-thread
B = Buttress-thread
13
DIMENSÕES E PROPRIEDADES DE DESEMPENHO (CASING)
DIMENSIONS AND PERFORMANCE PROPERTIES (CASING)
14
Inside Diameter
Drift Diameter
Size
Oustide Diameter
inch
inch
mm
inch
mm
7
7.000
177,80
6.538
166,06
6.413
162,88
-
-
0.231
5,87
17.00
7
7.000
177,80
6.456
163,98
6.331
160,80
-
-
0.272
6,91
20.00
7
7.000
177,80
6.366
161,70
6.241
158,52
6.250
158,75
0.317
8,05
23.00
7
7.000
177,80
6.276
159,42
6.151
156,24
-
-
0.362
9,19
26.00
7
7.000
177,80
6.184
157,08
6.059
153,90
-
-
0.408
10,36
29.00
9 5/8
9.625
244,48
9.001
228,64
8.845
224,67
-
-
0.312
7,92
32.30
9 5/8
9.625
244,48
8.921
226,60
8.765
222,63
-
-
0.352
8,94
36.00
9 5/8
9.625
244,48
8.835
224,42
8.679
220,45
8.750
222,25
0.395
10,03
40.00
9 5/8
9.625
244,48
8.755
222,38
8.599
218,41
-
-
0.435
11,05
43.50
Regular
inch
mm
Alternative
inch
mm
Wall Thickness
inch
mm
Label
lb/ft
OCTG
a
lb/ft
kg/m
16.72
24,89
19.57
29,12
22.64
33,70
25.67
38,21
28.74
42,78
31.04
34.89
38.96
42.74
Grade
46,20
51,93
57,99
63,61
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
H40
J55
K55
L80
N80Q
P110
STC
LTC
BTC
Collapse
Resistanceb
lb
lb
lb
psi
176,000
234,000
254,000
284,000
309,000
334,000
364,000
254,000
294,000
394,000
423,000
452,000
486,000
-
313,000
341,000
435,000
442,000
367,000
401,000
511,000
519,000
693,000
587,000
597,000
797,000
453,000
489,000
520,000
561,000
727,000
737,000
813,000
825,000
1,105,000
432,000
522,000
565,000
588,000
490,000
592,000
641,000
667,000
853,000
718,000
746,000
955,000
639,000
755,000
714,000
843,000
947,000
979,000
1,038,000
1,074,000
1,388,000
1,970
2,270
2,270
3,270
3,270
3,830
3,830
4,330
4,330
5,410
5,410
6,230
7,030
7,030
8,530
1,370
1,720
2,020
2,020
2,570
2,570
3,090
3,090
3,810
3,810
4,420
Internal Yield
Pressureb
(Pipe body)
Type of
End-finish
psi
psi
2,720
3,740
3,740
4,360
4,360
6,340C
6,340C
4,980C
4,980C
7,240C
7,240C
9,960C
8,160C
8,160C
11,220C
2,270
2,560
3,520
3,520
3,950C
3,950C
5,750C
5,750C
6,330C
6,330C
8,700C
PS
PS
PS
PSLB
PSLB
PLB
PLB
PSLB
PSLB
PLB
PLB
PLB
PLB
PLB
PLB
PS
PS
PSLB
PSLB
PSLB
PSLB
PLB
PLB
PLB
PLB
PLB
NOTE:
a
Nominal linear masses
are shown for information
only and do not consider
mass gain or loss due to
end finishing.
b
According to API TR 5C3
- 2008
c
Internal Yield Pressure
for pipe body and
connection are the same,
except for these items,
verify API TR 5C3 2008 Table L4.
LEGEND:
STC = Short round-thread
casing
LTC = Long round-thread
casing
BTC = Buttress thread
casing
P = Plain End
S = Short round-thread
L = Long round-thread
B = Buttress-thread
15
OCTG
TOLERÂNCIAS DE COMPRIMENTO - PUP JOINT
RANGE LENGTHS - PUP JOINT
d
ft
Nominal
m
Min.
Max.
ft
m
ft
m
2.0
0,61
1.7
0,53
2.3
0,69
4.0
1,22
3.7
1,14
4.3
1,30
6.0
1,83
5.7
1,75
6.3
1,91
8.0
2,44
7.7
2,36
8.3
2,52
10.0
3,05
9.7
2,97
10.3
3,13
12.0
3,66
11.7
3,58
12.3
3,74
NOTE:
Tolerance +- 76mm.
COMPOSIÇÃO QUÍMICA (PORCENTAGEM DE FRAÇÃO EM MASSA)
CHEMICAL COMPOSITION (MASS FRACTION)
Group
Grade
Type
H40
%Max.
Cr
Ni
C
Mn
Mo
-
-
-
-
-
J55
-
-
-
-
K55
-
-
-
N80
Q
-
2
L80
1
3
P110
-
1
Cu
P
S
Si
-
-
0.030
0.030
-
-
-
-
0.030
0.030
-
-
-
-
-
0.030
0.030
-
-
-
-
-
-
0.030
0.030
-
0.43
1.9
-
-
0.25
0.35
0.030
0.030
0.45
-
-
-
-
-
-
0.020
0.010
-
REQUISITOS PARA PROPRIEDADES MECÂNICAS (ENSAIO DE TRAÇÃO E DUREZA)
TENSILE AND HARDNESS REQUIREMENTS
Grade
API General
Service
API Sour Service
API High-Strength
Min.
Tensile Strength Hardness
Yield Strength
Max.
Min.
Max.
MPa
psi
MPa
psi
MPa
psi
HRC
H40
276
40,000
552
80,000
414
60,000
-
J55
379
55,000
552
80,000
517
75,000
-
K55
379
55,000
552
80,000
655
95,000
-
L80
552
80,000
655
95,000
655
95,000
23
N80
552
80,000
758
110,000
689
100,000
-
P110
756
110,000
965
140,000
862
125,000
-
NOTE: Charpy impact test according to API 5CT.
16
API 5L
Tubos desenvolvidos para atender às exigências do sistema de transporte da
indústria de petróleo e gás, fornecidos sem revestimento ou revestidos externamente
em FBE, tripla camada de polietileno ou polipropileno. Os tubos atendem à norma
NACE 0175, onde aplicável.
Pipes developed to meet the requirements of oil and gas industry’s transportation
system, supplied with or without external coating in FBE, triple-layer polyethylene or
polypropylene. The pipes meet the standard NACE 0175, if required.
17
PSL 2
%Max
Grade
C
Mn
P
S
Cu
Ni
Cr
Mo
Si
B
d
V
Nb
Ti
Nb+V+Ti Nb+V Ce(Pcm)a Ce (IIW)b
L245R or BR
0.24
0.025
0.015
0.50
0.30
0.30
0.15
0.40
c
-
-
0.04
-
0.06
0.25
0.43
L290R or X42R
0.24d
1.20d
0.025
0.015
0.50
0.30
0.30
0.15
0.40
c
0.06
0.05
0.04
-
-
0.25
0.43
L245N or BN
0.24
d
1.20
d
0.025
0.015
0.50
0.30
0.30
0.15
0.40
c
-
-
0.04
-
0.06
0.25
0.43
L290N or X42N
0.24
d
1.20
d
0.025
0.015
0.50
0.30
0.30
0.15
0.40
c
0.06
0.05
0.04
-
-
0.25
0.43
L320N or X46N
0.24d
1.40d
0.025
0.015
0.50
0.30
0.30
0.15
0.40
c
0.07
0.05
0.04
0.15
-
0.25
0.43
L360N or X52N
0.24
1.40
d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.10
0.05
0.04
0.15
-
0.25
0.43
L390N or X56N
0.24d
1.40d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.10f
0.05
0.04
0.15
-
0.25
0.43
1.40
f
f
0.05
f
0.04
0.15
-
e
e
L415N or X60N 0.24
d
d
d,f
1.20
0.025
0.015
0.50
0.50
0.50
0.50
0.45
c
0.10
d
d,f
L245Q or BQ
0.18
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.05
0.05
0.04
-
-
0.25
0.43
L290Q or X42Q
0.18d
1.40d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.05
0.05
0.04
-
-
0.25
0.43
L320Q or X46Q
0.18
d
1.40
d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.05
0.05
0.04
-
-
0.25
0.43
L360Q or X52Q
0.18
d
1.50
d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.05
0.05
0.04
-
-
0.25
0.43
L390Q or X56Q
0.18d
1.50d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.07
0.05
0.04
0.15
-
0.25
0.43
L415Q or X60Q
0.18
d,f
1.70
d,f
0.025
0.015
0.50
0.50
0.50
0.50
0.45
f
c
-
-
-
0.15
-
0.25
0.43
L450Q or X65Q
0.18
d,f
1.70
d,f
0.025
0.015
0.50
0.50
0.50
0.50
0.45
f
c
-
-
-
0.15
-
0.25
0.43
L485Q or X70Q
0.18d,f 1.80d,f
0.025
0.015
0.50
0.50
0.50
0.50
0.45f
c
-
-
-
0.15
-
0.25
0.43
L555Q or X80Q
0.18
0.025
0.015
0.50
1.00
0.50
0.50
0.45
0.004
-
-
-
0.15
-
e
e
L245M or BM
0.22d
1.20d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.05
0.05
0.04
-
-
0.25
0.43
L290M or X42M
0.22d
1.30d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.05
0.05
0.04
-
-
0.25
0.43
L320M or X46M
0.22
1.30
d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
0.05
0.05
0.04
-
-
0.25
0.43
L360M or X52M
0.22d
1.40d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
-
-
-
0.15
-
0.25
0.43
L390M or X56M
0.22
1.40
d
0.025
0.015
0.50
0.30
0.30
0.15
0.45
c
-
-
-
0.15
-
0.25
0.43
d,f
0.025
0.015
0.50
0.50
0.50
0.50
0.45
f
c
-
-
-
0.15
-
0.25
0.43
L450M or X65M 0.12d,f 1.60d,f
0.025
0.015
0.50
0.50
0.50
0.50
0.45f
c
-
-
-
0.15
-
0.25
0.43
0.025
0.015
0.50
0.50
0.50
0.50
0.45
f
c
-
-
-
0.15
-
0.25
0.43
0.025
0.015
0.50
1.00
0.50
0.50
0.45
f
c
-
-
-
0.15
-
0.25
0.43
L415M or X60M 0.12
d
d,f
d
d
d,f
1.40
f
1.90
1.60
d,f
L485M or X70M 0.12
d,f
1.70
d,f
L555M or X80M 0.12
d,f
1.85
d,f
f
PSL 1c
%Max
Grade
C
L245 or B
0.26
L290 or X42
Mn
P
S
Cu
Ni
Cr
Mo
d
0.030
0.030
0.50
0.50
0.50
0.15
0.15
0.06
0.26d
1.30d
0.030
0.030
0.50
0.50
0.50
0.15
0.15
-
L320 or X46
0.26d
1.40d
0.030
0.030
0.50
0.50
0.50
0.15
0.15
-
L360 or X52
0.26d
1.40d
0.030
0.030
0.50
0.50
0.50
0.15
0.15
-
L390 or X56
0.26
1.40
0.030
0.030
0.50
0.50
0.50
0.15
0.15
-
L415 or X60
0.26d,f
1.40d,f
0.030
0.030
0.50
0.50
0.50
0.15
0.15
-
L450 or X65
0.26d,f
1.45d,f
0.030
0.030
0.50
0.50
0.50
0.15
0.15
-
L485 or X70
0.26d,f
1.65d,f
0.030
0.030
0.50
0.50
0.50
0.15
0.15
-
d
d
1.20
d
Nb+V+Ti Nb+V
NOTE: Applicable to PSL1 and PSL2
a
For PSL 2 pipe with a product analysis carbon mass
fraction equal to or less than 0.12 %, the carbon equivalent,
CE(Pcm), shall be determined using the following equation:
Si Mn Cu Ni Cr Mo V
CE(Pcm) = C+
+
+
+
+
+
+
+ 5B
30 20 20 60 20 15 10
b
For PSL 2 pipe with a product analysis carbon mass
fraction greater than 0.12 %, the carbon equivalent, CE(IIW),
shall be determined using the following equation:
Mn (Cr+Mo+V) (Ni+Cu)
CE(IIW) = C+
+
+
6
5
15
c
No deliberate addition of B is permitted and the
residual B ≤ 0,001%.
d
For each reduction of 0.01 % below the specified maximum for
carbon, an increase of 0.05 % above the specified maximum for
manganese is permissible, up to a maximum of:
- API5L PSL1: 1.65 % for grades ≥ L245 or B, but ≤ L360 or X52;
up to a maximum of 1.75 % for grades > L360 or X52, but < L485
or X70; and up to a maximum of 2.00 % for grade L485 or X70.
- API5L PSL2: 1.65 % for grades ≥ L245 or B, but ≤ L360 or X52;
up to a maximum of 1.75 % for grades > L360 or X52, but < L485
or X70; up to a maximum of 2.00 % for grades ≥ L485 or X70, but
≤ L555 or X80; and up to a maximum of 2.20 % for grades >
L555 or X80.
e
As agreed between the purchaser and the manufacturer.
f
Unless otherwise agreed.
18
LINE
PIPE
SOUR SERVICE
%Max
Grade
NV+V+Ti
Nb+V
0.15
0.06
0.19
0.36
0.04 0.06i 0.012i 0.006h
-
-
0.19
0.36
0.05
0.04 0.06i 0.012i 0.006h
0.15
-
0.20
0.38
0.40 0.0005 0.10
0.05
0.04 0.06i 0.012i 0.006h
0.15
-
0.22
0.43
0.15
0.40 0.0005 0.04
0.04
0.04 0.06i 0.012i 0.006h
-
-
0.19
0.34
0.30
0.15
0.40 0.0005 0.04
0.04
0.04 0.06
h
-
-
0.19
0.34
0.30
0.30
0.15
0.40 0.0005 0.05
0.05
0.04 0.06i 0.012i 0.006h
-
-
0.20
0.36
L360QS or X52QS 0.16d 1.65d 0.020 0.003g,h 0.35j
0.30
0.30
0.15
0.40 0.0005 0.07
0.05
0.04 0.06i 0.012i 0.006h
0.15
-
0.20
0.39
L390QS or X56QS 0.16
0.30
0.30
0.15
0.40 0.0005 0.07
0.05
0.04 0.06
h
0.15
-
0.21
0.40
L415QS or X60QS 0.16d 1.65d 0.020 0.003g,h 0.35j 0.30m 0.30l
0.15k 0.45 0.0005 0.08
0.05
0.04 0.06i 0.012i 0.006h
0.15
-
0.22
0.41
0.15k 0.45 0.0005 0.09
0.05
0.06 0.06i 0.012i 0.006h
0.15
-
0.22
0.42
0.15k 0.45 0.0005 0.09
0.05
0.06 0.06i 0.012i 0.006h
0.15
-
0.22
0.42
L245MS or BMS
C
Ni
Cr
Mo
j
0.30
0.30
0.15
0.40 0.0005
L290NS or X42NS 0.14d 1.35d 0.020 0.003g,h 0.35j
0.30
0.30
0.15
0.40 0.0005 0.05
0.05
L320NS or X46NS 0.14d 1.40d 0.020 0.003g,h 0.35j
0.30
0.30
0.15
0.40 0.0005 0.07
L360NS or X52NS 0.16d 1.65d 0.020 0.003g,h 0.35j
0.30
0.30
0.15
0.30
0.30
j
0.30
L320QS or X46QS 0.15d 1.40d 0.020 0.003g,h 0.35j
c
L245NS or BNS
L245QS or BQS
0.14
Mn
d
P
S
1.35 0.020 0.003
d
Cu
g,h
0.35
0.14d 1.35d 0.020 0.003g,h 0.35j
L290QS or X42QS 0.14
d
d
1.35 0.020 0.003
d
1.65 0.020 0.003
d
g,h
g,h
0.35
0.35
j
0.10d 1.25d 0.020 0.003g,h 0.35j
Si
B
V
Nb
-
-
Ti
Al
0.04 0.06
N
i
i
i
Ca
0.012 0.006
i
0.012 0.006
i
0.012 0.006
i
h
Ce(Pcm)a Ce(IIW)b
0.30
0.30
0.15k 0.40 0.0005 0.04
0.04
0.04 0.06i 0.012i 0.006h
-
-
0.19
-
j
0.30
0.30
0.15
0.40 0.0005 0.04
0.04
0.04 0.06
h
-
-
0.19
-
L320MS or X46MS 0.10d 1.35d 0.020 0.003g,h 0.35j
0.30
0.30
0.15k 0.45 0.0005 0.05
0.05
0.04 0.06i 0.012i 0.006h
-
-
0.20
-
L360MS or X52MS 0.10d 1.45d 0.020 0.003g,h 0.35j
0.30
0.30
0.15k 0.45 0.0005 0.05
0.06
0.04 0.06i 0.012i 0.006h
L390MS or X56MS 0.10
j
0.30
0.30
0.15
0.45 0.0005 0.06
L415MS or X60MS 0.10d 1.45d 0.020 0.003g,h 0.35j
0.30
0.30
L450MS or X65MS 0.10d 1.60d 0.020 0.003g,h 0.35j
0.30
L485MS or X70MS 0.10d 1.60d 0.020 0.003g,h 0.35j
0.30
L290MS or X42MS 0.10
d
d
1.25 0.020 0.003
d
1.45 0.020 0.003
d
g,h
g,h
0.35
0.35
k
-
-
0.20
-
0.08
0.04 0.06
0.15
-
0.21
-
0.15k 0.45 0.0005 0.08
0.08
0.06 0.06i 0.012i 0.006h
0.15
-
0.21
-
0.30l
0.15k 0.45 0.0005 0.10
0.08
0.06 0.06i 0.012i 0.006h
0.15
-
0.22
-
0.30l
0.15k 0.45 0.0005 0.10
0.08
0.06 0.06i 0.012i 0.006h
0.15
-
0.22
-
Si Mn Cu Ni Cr Mo V
+
+
+
+
+
+
+ 5B
30 20 20 60 20 15 10
b
For pipe with a product analysis carbon mass fraction greater than 0.12 %, the
carbon equivalent, CE(IIW), shall be determined using the following equation:
CE(Pcm) = C+
c
d
0.012 0.006
i
h
k
a
For pipe with a product analysis carbon mass fraction equal to or less than 0.12 %,
the carbon equivalent, CE(Pcm), shall be determined using the following equation:
CE(IIW) = C+
i
i
0.012 0.006
i
j
If agreed, this limit can be reduced to 0.10%.
k
If agreed, this limit can be increased to 0.35%.
l
m
+
+
15
6
5
S = Sour Service; O = Offshore
For each reduction of 0.01% below the specified maximum concentration for carbon,
an increase of 0.05% above the specified maximum concentration for manganese is
permissible, up to a maximum increase of 0.20%.
e
f
Not specified.
g
If agreed, this limit can be increased to 0.006%, but Ca/S rates shall be reduced.
h
If added intentionally, S > 0.0015%, Ca/S ≥ 1.5%.
i
The concentration of Al must be higher than or equal to twice the N concentration,
except for steels that are titanium-killed or titanium-treated.
19
Offshore
%Max
Ca
NV+V+Ti
Nb+V
0.04 0.06g 0.012
-
0.15
0.06
0.19
0.36
0.05
0.04 0.06g 0.012
-
-
-
0.19
0.36
0.05
0.04 0.06
0.012
-
0.15
-
0.20
0.38
0.10
0.05
0.04 0.06g 0.012
-
0.15
-
0.22
0.43
0.30
0.10 0.40 0.0005 0.04
0.04
0.04 0.06g 0.012
-
-
-
0.19
0.34
0.30
0.30
0.10 0.40 0.0005 0.04
0.04
0.04 0.06g 0.012
-
-
-
0.19
0.34
0.35
0.30
0.30
0.10 0.45 0.0005 0.05
0.05
0.04 0.06g 0.012
-
-
-
0.20
0.36
0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.07
0.05
0.04 0.06
0.012
-
0.15
-
0.20
0.39
L390QO or X56QO 0.16d 1.65d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.07
0.05
0.04 0.06g 0.012
-
0.15
-
0.21
0.40
L415QO or X60QO 0.16d 1.65d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.08
0.05
0.04 0.06g 0.012
-
0.15
-
0.22
0.41
L450QO or X65QO 0.16
0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.09
0.05
0.06 0.06
0.012
-
0.15
-
0.22
0.42
L485QO or X70QO 0.17d 1.75d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.10
0.05
0.06 0.06g 0.012
-
0.15
-
0.23
0.42
L555QO or X80QO 0.17d 1.85d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.10
0.06
0.06 0.06g 0.012
-
0.15
-
e
e
L245MO or BMO
0.12d 1.25d 0.020 0.010
0.35
0.30
0.30
0.10 0.40 0.0005 0.04
0.04
0.04 0.06g 0.012
-
-
-
0.19
-
L290MO or X42MO 0.12d 1.35d 0.020 0.010
0.35
0.30
0.30
0.10 0.40 0.0005 0.04
0.04
0.04 0.06g 0.012
-
-
-
0.19
-
L320MO or X46MO 0.12
0.020 0.010
0.35
0.30
0.30
0.10 0.45 0.0005 0.05
0.05
0.04 0.06
0.012
-
-
-
0.20
-
L360MO or X52MO 0.12d 1.65d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.05
0.05
0.04 0.06g 0.012
-
0.15
-
0.20
-
L390MO or X56MO 0.12d 1.65d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.06
0.08
0.04 0.06g 0.012
-
0.15
-
0.21
-
L415MO or X60MO 0.12
0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.08
0.08
0.06 0.06
0.012
-
0.15
-
0.21
-
L450MO or X65MO 0.12d 1.65d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.10
0.08
0.06 0.06g 0.012
-
0.15
-
0.22
-
L485MO or X70MO 0.12d 1.75d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.10
0.08
0.06 0.06g 0.012
-
0.15
-
0.22
-
L555MO or X80MO 0.12d 1.85d 0.020 0.010
0.50
0.50
0.50
0.50 0.45 0.0005 0.10
0.08
0.06 0.06g 0.012
-
0.15
-
0.24
-
Grade
C
Cu
Ni
Cr
Mo
0.14d 1.35d 0.020 0.010
0.35
0.30
0.30
0.10 0.40 0.0005
L290NO or X42NO 0.14d 1.35d 0.020 0.010
0.35
0.30
0.30
L320NO or X46NO 0.14
0.35
0.30
0.30
f
f
f
0.14d 1.35d 0.020 0.010
0.35
0.30
L290QO or X42QO 0.14d 1.35d 0.020 0.010
0.35
L320QO or X46QO 0.15d 1.40d 0.020 0.010
L360QO or X52QO 0.16
c
L245NO or BNO
Mn
d
1.40
P
d
S
0.020 0.010
L360NO or X52NO 0.16d 1.65d 0.020 0.010
L2450QO or BQO
d
d
d
d
1.65
1.65
1.35
1.65
d
d
d
d
V
Nb
-
-
0.10 0.40 0.0005 0.05
0.10 0.40 0.0005 0.07
f
Si
0.45
a
For pipe with a product analysis carbon mass fraction equal to or less than 0.12 %,
the carbon equivalent, CE(IIW), shall be determined using the following equation:
CE(Pcm) = C+
Si Mn Cu Ni Cr Mo V
+
+
+
+
+
+
+ 5B
30 20 20 60 20 15 10
b
For pipe with a product analysis carbon mass fraction greater than 0.12 %, the
carbon equivalent, CEIIW, shall be determined using the following equation:
CE(IIW) = C+
+
+
5
15
6
c
d
S = Sour Service; O = Offshore
For each reduction of 0.01% below the specified maximum concentration for carbon,
an increase of 0.05% above the specified maximum concentration for manganese is
permissible, up to a maximum increase of 0.20%.
e
f
Not specified.
g
The concentration of Al must be higher than or equal to twice the N concentration,
except for steels that are titanium-killed or titanium-treated.
20
B
f
Ti
Al
N
g
g
g
g
g
Ce(Pcm)a Ce(IIW)b
REQUISITOS PARA PROPRIEDADES MECÂNICAS (ENSAIO DE TRAÇÃO)
TENSILE REQUIREMENTS
LINE
PIPE
PSL1 and PSL2
Tensile Strength
Yield Strength
a
Min.
Grade
Max.
Min.
b
Max.b
MPa
psi
MPa
psi
MPa
psi
MPa
psi
L245 ou B
245
35,500
450c
65,300c
415
60,200
655
95,000
L290 ou X42
290
42,100
495
71,800
415
60,200
655
95,000
L320 ou X46
320
46,400
525
76,100
435
63,100
655
95,000
L360 ou X52
360
52,200
530
76,900
460
66,700
760
110,200
L390 ou X56
390
56,600
545
79,000
490
71,100
760
110,200
L415 ou X60
415
60,200
565
81,900
520
75,400
760
110,200
L450 ou X65
450
65,300
600
87,000
535
77,600
760
110,200
L485 ou X70
485
70,300
635
92,100
570
82,700
760
110,200
L555 ou X80
555
80,500
705
102,300
625
90,600
825
119,700
b
Offshore
Tensile Strength
Min.
Max.b
Yield Strength
Max.b
a
Grade
Min.
MPa
psi
MPa
psi
MPa
psi
MPa
psi
L245 ou B
245
35,500
450
65,300
415
60,200
655
95,000
L290 ou X42
290
42,100
495
71,800
415
60,200
655
95,000
L320 ou X46
320
46,400
520
75,000
435
63,100
655
95,000
L360 ou X52
360
52,200
525
76,000
460
66,700
760
110,200
L390 ou X56
390
56,600
540
78,300
490
71,100
760
110,200
L415 ou X60
415
60,200
565
81,900
520
75,400
760
110,200
L450 ou X65
450
65,300
570
82,700
535
77,600
760
110,200
L485 ou X70
485
70,300
605
87,700
570
82,700
760
110,200
L555 ou X80b
555
80,500
675
97,900
625
90,600
825
119,700
NOTE:
a
Applicable for pipe body
only.
b
Applicable for PSL2 only.
c
For pipe with D < 219,1 mm
(8.625 in), the maximum yield
strength shall be equal or
smaller than 495 MPa
(71,800 psi).
REQUISITOS PARA ENSAIO CHARPY - PSL2
CHARPY TEST REQUIREMENTS - PSL2
Grade
Minimum CVN Absorbed
Energy Requirementsa b
J
ft.lbf
≤ L415/X60
27
20
> L415/X60 ≤ L450/X65
27
20
> L450/X65 ≤ L485/X70
27
20
> L485/X70 ≤ L555/X80
40
30
NOTE:
Individual test values for any test piece
shall be equal or greater than 75% of the
required minimum average (of a set of
three test pieces) absorbed energy values.
b
Full size specimen, at 0°C
a
21
DIMENSÕES E PRESSÕES PARA TESTE HIDROSTÁTICO
DIMENSIONS AND HYDROSTATIC TEST PRESSURE
Diameter
inch
22
mm
2 3/8
60,3
2 7/8
73,0
3
76,2
3 1/2
88,9
4
101,6
4 1/2
114,3
Wall Thickness
Nominal Masses
inch
mm
lb/ft
0.110
0.125
0.141
0.154
0.172
0.188
0.218
0.110
0.125
0.141
0.156
0.172
0.188
0.203
0.216
0.250
0.279
0.300
0.110
0.125
0.141
0.156
0.172
0.188
0.216
0.250
0.281
0.300
0.110
0.125
0.141
0.156
0.172
0.188
0.216
0.250
0.281
0.299
0.125
0.141
0.156
0.172
0.188
0.226
0.250
0.281
0.318
0.125
0.141
0.156
0.172
0.188
0.203
2,80
3,20
3,60
3,90
4,40
4,80
5,50
2,80
3,20
3,60
4,00
4,40
4,80
5,20
5,50
6,40
7,10
7,60
2,80
3,20
3,60
4,00
4,40
4,80
5,50
6,40
7,10
7,60
2,80
3,20
3,60
4,00
4,40
4,80
5,50
6,40
7,10
7,60
3,20
3,60
4,00
4,40
4,80
5,70
6,40
7,10
8,10
3,20
3,60
4,00
4,40
4,80
5,20
2.66
3.01
3.37
3.66
4.05
5.40
5.03
3.25
3.67
4.12
4.53
4.97
5.40
5.80
6.14
7.02
7.74
8.26
3.40
3.84
4.31
4.74
5.20
5.65
6.43
7.35
8.17
8.66
3.99
4.51
5.06
5.58
6.12
6.66
7.58
8.69
9.67
10.23
5.18
5.82
6.41
7.04
7.66
9.12
10.02
11.17
12.52
5.85
6.57
7.24
7.96
8.67
9.32
kg/m
3,97
4,51
5,03
5,42
6,07
6,57
7,43
4,85
5,51
6,16
6,81
7,44
8,07
8,69
9,16
10,51
11,54
12,26
5,07
5,76
6,45
7,12
7,19
8,45
9,59
11,02
12,10
12,86
5,95
6,76
7,57
8,37
9,17
9,95
11,31
13,02
14,32
15,24
7,76
8,70
9,63
10,55
11,46
13,48
15,02
16,55
18,68
8,77
9,83
10,88
11,92
12,96
13,99
For Reference Only
ASME B36.10M
Diameter
Inch
2
2 1/2
-
3
3 1/2
4
Schedule
SCH 10
SCH 30
SCH 40
SCH 80
SCH 30
SCH 40
SCH 80
SCH 30
SCH 40
SCH 80
SCH 30
SCH 40
SCH 80
SCH 30
-
L245 or B
L290 or X42
L320 or X46
SDT
psi
ALT
psi
SDT
psi
ALT
psi
SDT
psi
ALT
psi
2,000
2,300
2,500
2,500
2,500
2,500
2,500
1,700
1,900
2,100
2,400
2,500
2,500
2,500
2,500
2,500
2,500
2,500
1,600
1,800
2,100
2,300
2,500
2,500
2,500
2,500
2,500
2,500
1,400
1,600
1,800
1,900
2,100
2,300
2,500
2,500
2,500
2,500
1,400
1,600
1,700
1,900
2,100
2,500
2,700
2,800
2,800
1,200
1,400
1,500
1,700
1,800
2,000
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,100
2,400
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,000
2,300
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
1,700
2,000
2,200
2,500
2,500
2,500
2,500
2,500
2,500
2,500
1,700
1,900
2,100
2,300
2,600
2,800
2,800
2,800
2,800
1,500
1,700
1,900
2,100
2,300
2,500
2,400
2,700
3,000
3,000
3,000
3,000
3,000
2,000
2,200
2,500
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
1,900
2,200
2,400
2,700
2,900
3,000
3,000
3,000
3,000
3,000
1,600
1,900
2,100
2,300
2,500
2,800
3,000
3,000
3,000
3,000
1,600
1,800
2,000
2,200
2,400
2,900
3,000
3,000
3,000
1,500
1,600
1,800
2,000
2,200
2,300
3,000
3,400
3,800
4,100
4,600
5,000
5,800
2,500
2,800
3,100
3,500
3,800
4,200
4,500
4,800
5,500
6,200
6,600
2,400
2,700
3,000
3,300
3,700
4,000
4,600
5,300
6,000
6,400
2,000
2,300
2,600
2,900
3,200
3,400
3,900
4,600
5,100
5,400
2,000
2,300
2,500
2,800
3,000
3,600
4,000
4,500
5,100
1,800
2,000
2,200
2,500
2,700
2,900
2,600
3,000
3,000
3,000
3,000
3,000
3,000
2,200
2,500
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,100
2,400
2,700
2,900
3,000
3,000
3,000
3,000
3,000
3,000
1,800
2,000
2,300
2,500
2,800
3,000
3,000
3,000
3,000
3,000
1,800
2,000
2,200
2,400
2,700
3,000
3,000
3,000
3,000
1,600
1,800
2,000
2,200
2,400
2,600
3,300
3,700
4,200
4,600
5,100
5,600
6,400
2,700
3,100
3,500
3,800
4,200
4,600
5,000
5,300
6,100
6,800
7,300
2,600
2,900
3,300
3,700
4,000
4,400
5,100
5,800
6,600
7,000
2,200
2,500
2,900
3,200
3,500
3,800
4,300
5,000
5,600
6,000
2,200
2,500
2,800
3,000
3,300
4,000
4,400
4,900
5,600
2,000
2,200
2,500
2,700
3,000
3,200
LINE
PIPE
L360 or X52
L390 or X56
L415 or X60
L450 or X65
SDT
psi
ALT
psi
SDT
psi
ALT
psi
SDT
psi
ALT
psi
SDT
psi
ALT
psi
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,400
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,300
2,700
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,000
2,300
2,600
2,800
3,000
3,000
3,000
3,000
3,000
3,000
2,000
2,300
2,500
2,700
3,000
3,000
3,000
3,000
3,000
1,800
2,000
2,200
2,400
2,700
2,900
3,700
4,200
4,700
5,100
5,700
6,200
7,200
3,000
3,500
3,900
4,300
4,700
5,200
5,600
5,900
6,900
7,300
7,300
2,900
3,300
3,700
4,100
4,500
5,000
5,700
6,600
7,300
7,300
2,500
2,800
3,200
3,500
3,900
4,300
4,900
5,600
6,300
6,700
2,500
2,800
3,100
3,400
3,700
4,500
4,900
5,600
6,300
2,200
2,500
2,800
3,000
3,300
3,600
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,600
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,500
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,200
2,500
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,200
2,400
2,700
3,000
3,000
3,000
3,000
3,000
3,000
1,900
2,200
2,400
2,600
2,900
3,000
4,000
4,500
5,100
5,600
6,200
6,800
7,300
3,300
3,700
4,200
4,700
5,100
5,600
6,000
6,400
7,300
7,300
7,300
3,200
3,600
4,000
4,500
4,900
5,400
6,200
7,100
7,300
7,300
2,700
3,100
3,500
3,800
4,200
4,600
5,300
6,100
6,900
7,300
2,700
3,000
3,400
3,700
4,000
4,800
5,400
6,000
6,800
2,400
2,700
3,000
3,300
3,600
3,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,700
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,300
2,600
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,300
2,600
2,900
3,000
3,000
3,000
3,000
3,000
3,000
2,100
2,300
2,600
2,800
3,000
3,000
4,200
4,800
5,400
5,900
6,600
7,200
7,300
3,500
4,000
4,500
4,900
5,500
6,000
6,400
6,800
7,300
7,300
7,300
3,400
3,800
4,300
4,700
5,200
5,700
6,600
7,300
7,300
7,300
2,900
3,300
3,700
4,100
4,500
4,900
5,600
6,500
7,300
7,300
2,900
3,200
3,600
3,900
4,300
5,200
5,700
6,400
7,200
2,600
2,900
3,200
3,500
3,800
4,100
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,500
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,500
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,200
2,500
2,800
3,000
3,000
3,000
4,600
5,200
5,900
6,400
7,100
7,300
7,300
3,800
4,300
4,900
5,400
5,900
6,500
7,000
7,300
7,300
7,300
7,300
3,600
4,100
4,700
5,100
5,700
6,200
7,100
7,300
7,300
7,300
3,100
3,500
4,000
4,400
4,900
5,300
6,100
7,000
7,300
7,300
3,100
3,500
3,900
4,300
4,700
5,600
6,200
6,900
7,300
2,800
3,100
3,400
3,800
4,100
4,500
L485 or X70
ALT
psi
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,700
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,700
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,400
2,700
3,000
3,000
3,000
3,000
L555 or X80
SDT
psi
ALT
psi
SDT
psi
4,900
5,600
6,300
6,900
7,300
7,300
7,300
4,100
4,600
5,200
5,800
6,400
6,900
7,300
7,300
7,300
7,300
7,300
3,900
4,400
5,000
5,500
6,100
6,700
7,300
7,300
7,300
7,300
3,400
3,800
4,300
4,800
5,200
5,700
6,600
7,300
7,300
7,300
3,300
3,800
4,200
4,600
5,000
6,000
6,600
7,300
7,300
3,000
3,400
3,700
4,100
4,500
4,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,700
3,000
3,000
3,000
3,000
3,000
5,600
6,400
7,200
7,300
7,300
7,300
7,300
4,700
5,300
6,000
6,600
7,300
7,300
7,300
7,300
7,300
7,300
7,300
4,500
5,100
5,700
6,300
7,000
7,300
7,300
7,300
7,300
7,300
3,800
4,400
4,900
5,400
6,000
6,500
7,300
7,300
7,300
7,300
3,800
4,300
4,800
5,200
5,700
6,900
7,300
7,300
7,300
3,400
3,800
4,200
4,700
5,100
5,500
23
DIMENSÕES E PRESSÕES PARA TESTE HIDROSTÁTICO
DIMENSIONS AND HYDROSTATIC TEST PRESSURE
Diameter
inch
24
mm
4 1/2
114,3
5 9/16
141,3
6 1/2
165,1
6 5/8
168,3
8 5/8
219,1
Wall Thickness
Nominal Masses
inch
mm
lb/ft
0.219
0.237
0.250
0.281
0.312
0.337
0.156
0.188
0.219
0.258
0.281
0.312
0.377
0.156
0.172
0.188
0.203
0.219
0.250
0.280
0.312
0.344
0.375
0.156
0.172
0.188
0.203
0.219
0.250
0.280
0.312
0.344
0.375
0.432
0.188
0.203
0.219
0.250
0.277
0.312
0.322
0.344
0.375
0.405
0.438
0.500
5,60
6,00
6,40
7,10
7,90
8,60
4,00
4,80
5,60
6,60
7,10
7,90
9,60
4,00
4,40
4,80
5,20
5,60
6,40
7,10
7,90
8,70
9,50
4,00
4,40
4,80
5,20
5,60
6,40
7,10
7,90
8,70
9,50
11,00
4,80
5,20
5,60
6,40
7,00
7,90
8,20
8,70
9,50
10,30
11,10
12,70
10.02
10.80
11.36
12.67
13.97
15.00
9.02
10.80
12.51
14.63
15.87
17.51
20.90
10.58
11.64
12.69
13.66
14.70
16.70
18.62
20.64
22.64
24.55
10.79
11.87
12.94
13.94
15.00
17.04
18.99
21.06
23.10
25.05
28.60
16.96
18.28
19.68
22.38
24.72
27.73
28.58
30.45
33.07
35.59
38.33
43.43
kg/m
15,01
16,02
17,03
18,77
20,73
22,42
13,54
16,16
18,74
21,92
23,50
25,99
31,18
15,89
17,44
18,97
20,50
22,03
25,05
27,66
30,62
33,55
36,45
16,21
17,78
19,35
20,91
22,47
25,55
28,22
31,25
34,24
37,20
42,67
25,37
27,43
29,48
33,57
36,61
41,14
42,65
45,14
49,10
53,03
56,94
64,64
For reference only
ASME B36.10M
Diameter
Inch
4
5
-
6
8
Schedule
SCH 40
SCH 80
SCH 40
SCH 80
SCH 40
SCH 80
SCH 20
SCH 30
SCH 40
SCH 60
SCH 80
L245 or B
L290 or X42
L320 or X46
SDT
psi
ALT
psi
SDT
psi
ALT
psi
SDT
psi
ALT
psi
2,100
2,300
2,400
2,700
2,800
2,800
1,200
1,500
1,700
2,000
2,200
2,400
2,800
1,100
1,200
1,300
1,400
1,500
1,700
1,900
2,100
2,300
2,500
1,100
1,200
1,300
1,400
1,500
1,700
1,900
2,100
2,300
2,500
2,800
1,000
1,100
1,100
1,300
1,400
1,600
1,600
1,700
1,900
2,100
2,200
2,500
2,600
2,800
2,800
2,800
2,800
2,800
1,500
1,800
2,100
2,500
2,700
2,800
2,800
1,300
1,500
1,600
1,700
1,800
2,100
2,300
2,600
2,800
2,800
1,300
1,400
1,600
1,700
1,800
2,100
2,300
2,600
2,800
2,800
2,800
1,200
1,300
1,400
1,600
1,800
2,000
2,000
2,200
2,400
2,600
2,800
2,800
2,500
2,700
2,900
3,000
3,000
3,000
1,500
1,800
2,000
2,400
2,600
2,900
3,000
1,600
1,700
1,900
2,000
2,200
2,500
2,800
3,000
3,000
3,000
1,500
1,700
1,800
2,000
2,100
2,400
2,700
3,000
3,000
3,000
3,000
1,400
1,500
1,700
1,900
2,100
2,300
2,400
2,600
2,800
3,000
3,000
3,000
3,100
3,400
3,600
4,000
4,400
4,800
1,800
2,200
2,500
3,000
3,200
3,600
4,300
1,600
1,700
1,900
2,000
2,200
2,500
2,800
3,100
3,400
3,700
1,500
1,700
1,800
2,000
2,100
2,400
2,700
3,000
3,300
3,600
4,200
1,400
1,500
1,700
1,900
2,100
2,300
2,400
2,600
2,800
3,000
3,300
3,700
2,800
3,000
3,000
3,000
3,000
3,000
1,600
1,900
2,200
2,600
2,900
3,000
3,000
1,700
1,900
2,100
2,200
2,400
2,700
3,000
3,000
3,000
3,000
1,700
1,900
2,000
2,200
2,400
2,700
3,000
3,000
3,000
3,000
3,000
1,600
1,700
1,800
2,100
2,300
2,600
2,600
2,800
3,000
3,000
3,000
3,000
3,400
3,700
3,900
4,400
4,900
5,300
2,000
2,400
2,800
3,300
3,600
4,000
4,800
1,700
1,900
2,100
2,200
2,400
2,700
3,000
3,400
3,700
4,100
1,700
1,900
2,000
2,200
2,400
2,700
3,000
3,300
3,700
4,000
4,600
1,600
1,700
1,800
2,100
2,300
2,600
2,600
2,800
3,100
3,300
3,600
4,100
LINE
PIPE
L360 or X52
L390 or X56
L415 or X60
SDT
psi
ALT
psi
SDT
psi
ALT
psi
SDT
psi
3,000
3,000
3,000
3,000
3,000
3,000
1,800
2,200
2,500
3,000
3,000
3,000
3,000
1,900
2,100
2,300
2,500
2,700
3,000
3,000
3,000
3,000
3,000
1,900
2,100
2,300
2,400
2,600
3,000
3,000
3,000
3,000
3,000
3,000
1,800
1,900
2,000
2,300
2,600
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,900
4,200
4,400
4,900
5,500
5,900
2,200
2,700
3,100
3,700
4,000
4,400
5,400
1,900
2,100
2,300
2,500
2,700
3,100
3,400
3,800
4,200
4,600
1,900
2,100
2,300
2,400
2,600
3,000
3,400
3,700
4,100
4,500
5,200
1,800
1,900
2,000
2,300
2,600
2,900
3,000
3,200
3,500
3,700
4,000
4,600
3,000
3,000
3,000
3,000
3,000
3,000
2,000
2,300
2,700
3,000
3,000
3,000
3,000
2,100
2,300
2,500
2,700
2,900
3,000
3,000
3,000
3,000
3,000
2,000
2,300
2,500
2,700
2,900
3,000
3,000
3,000
3,000
3,000
3,000
1,900
2,000
2,200
2,500
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
4,200
4,500
4,800
5,400
5,900
6,400
2,400
2,900
3,400
4,000
4,300
4,800
5,800
2,100
2,300
2,500
2,700
2,900
3,300
3,700
4,100
4,500
4,900
2,000
2,300
2,500
2,700
2,900
3,300
3,600
4,000
4,500
4,900
5,600
1,900
2,000
2,200
2,500
2,800
3,100
3,200
3,400
3,700
4,000
4,400
5,000
3,000
3,000
3,000
3,000
3,000
3,000
2,100
2,500
2,900
3,000
3,000
3,000
3,000
2,200
2,400
2,700
2,900
3,000
3,000
3,000
3,000
3,000
3,000
2,200
2,400
2,600
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,000
2,200
2,300
2,700
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
L450 or X65
ALT
psi
SDT
psi
ALT
psi
4,400
4,800
5,100
5,700
6,300
6,800
2,600
3,100
3,600
4,200
4,600
5,100
6,200
2,200
2,400
2,700
2,900
3,100
3,500
3,900
4,400
4,800
5,300
2,200
2,400
2,600
2,800
3,000
3,500
3,900
4,300
4,700
5,200
5,900
2,000
2,200
2,300
2,700
3,000
3,300
3,400
3,700
4,000
4,300
4,600
5,300
3,000
3,000
3,000
3,000
3,000
3,000
2,200
2,700
3,000
3,000
3,000
3,000
3,000
2,400
2,600
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,400
2,600
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,200
2,400
2,500
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
4,800
5,200
5,500
6,200
6,800
7,300
2,800
3,400
3,900
4,600
5,000
5,500
6,700
2,400
2,600
2,900
3,100
3,400
3,800
4,300
4,800
5,200
5,700
2,400
2,600
2,800
3,100
3,300
3,700
4,200
4,700
5,100
5,600
6,400
2,200
2,400
2,500
2,900
3,200
3,600
3,700
4,000
4,300
4,600
5,000
5,700
L485 or X70
L555 or X80
ALT
psi
SDT
psi
ALT
psi
3,000
3,000
3,000
3,000
3,000
3,000
2,400
2,900
3,000
3,000
3,000
3,000
3,000
2,600
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,500
2,800
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,300
2,500
2,700
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
5,200
5,600
5,900
6,600
7,300
7,300
3,000
3,600
4,200
4,900
5,400
6,000
7,200
2,600
2,800
3,100
3,300
3,600
4,100
4,600
5,100
5,600
6,100
2,500
2,800
3,000
3,300
3,500
4,000
4,500
5,000
5,500
6,000
6,900
2,300
2,500
2,700
3,100
3,400
3,900
4,000
4,300
4,600
5,000
5,400
6,200
3,000
3,000
3,000
3,000
3,000
3,000
2,800
3,000
3,000
3,000
3,000
3,000
3,000
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
2,700
2,900
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
SDT
psi
5,900
6,400
6,800
7,300
7,300
7,300
3,400
4,100
4,800
5,700
6,100
6,800
7,300
2,900
3,200
3,500
3,800
4,100
4,700
5,300
5,800
6,400
7,000
2,900
3,200
3,500
3,700
4,000
4,600
5,200
5,700
6,300
6,900
7,300
2,700
2,900
3,100
3,500
3,900
4,400
4,600
4,900
5,300
5,700
6,200
7,000
NOTE:
SDT = Standard test pressure.
ALT = Alternative test pressure (Applicable if agreed between the purchaser and the manufacturer)
25
LINE PIPE – FLUXO DE PRODUÇÃO E CONTROLE DE QUALIDADE
LINE PIPE - MANUFACTURING AND QUALITY CONTROL FLOW DIAGRAM
Coil reception
and inspection
Uncoiling
Sizing and
straightening
inspection of pipe
Varnishing
26
Forming
Trimming of internal and
external the weld seam
Welding - HIFW
Emulsion cooling
after air cooling
inspection of strip
Slitter
Cutting to
individual length
Straightener
Flattenning test
and laboratory test
Hidrostatic test
Marking packing
and weightting
Annealing
Beveling and facing
(prove up)
Loading and
delivery
LINE
PIPE
CONEXÕES
CONNECTIONS
NON UPSET
EXTERNAL UPSET
SHORT ROUND
LONG ROUND
BUTTRESS
PREMIUM (on demand)
LP/NPT
REVESTIMENTOS
COATINGS
CAMISA DE FIBRA DE VIDRO
REVESTIMENTO INTERNO FBE
CAMISA DE PPEAD
POLIETILENO TRIPLA CAMADA
REVESTIMENTO EXTERNO FBE
POLIPROPILENO TRIPLA CAMADA
27
NBR DIN ASTM
Tubos Estruturais e Industriais
Tubos de aço carbono soldados pelo processo de fabricação em HFIW pretos ou
galvanizados atendendo a diversos segmentos como, tais como: Construção Civil,
Geotecnia , Plantas Industriais, Automotivo, Naval, Máquinas, Implementos Agrícolas e
Rodoviários, Sucroenergético, Telecomunicações, entre outros.
Tubos Especiais
Tubos com espessuras, requisitos químicos e mecânicos específicos para atender a
diversas aplicações tais como: estacas, torres de transmissão, andaimes, perfis, entre
outras. (Sob Consulta)
Industrial and Structural Pipes
Carbon steel pipes welded by the manufacturing process in black or galvanized HFIW,
attending several segments, such as Civil Construction, Geotechnics, Industrial
Plants, Automotive and Naval Areas, Machinery, Agricultural and Road Implements,
Sugar-Energy, Telecommunications, among others.
Special Pipes
Pipes with thickness, specific chemistry and mechanical requirements to meet to
different applications, such as stakes, transmission towers, scaffolds, profiles,
among others (on request).
28
COMPOSIÇÃO QUÍMICA
(PORCENTAGEM DE FRAÇÃO EM MASSA)
Specification
%Max.
Grade
ASTM A53
DIN EN 10255
NBR 6591
NBR 5590
A
B
1006
1008
1010
1015
1016
1020
1021
1025
1026
A
B
C
0.25
0.30
0.20
0.08
0.10
0.08-0.13
0.13-0.18
0.13-0.18
0.18-0.23
0.18-0.23
0.22-0.28
0.22-0.28
0.25
0.30
Mn
P
S
Cu
0.95
1.20
1.40
0.25-0.45
0.25-0.50
0.30-0.60
0.30-0.60
0.60-0.90
0.30-0.60
0.60-0.90
0.30-0.60
0.60-0.90
0.95
1.20
0.050
0.050
0.035
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.050
0.050
0.045
0.045
0.030
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.045
0.045
0.50
0.50a
0.40a
0.40a
Ni
Cr
0.40
0.40a
0.40a
0.40a
a
a
Mo
0.40
0.40a
0.40a
0.40a
a
V
0.15
0.15a
0.15a
0.15a
a
0.08a
0.08a
0.08a
0.08a
a
NOTE: The sum of theses elements shall be smaller than 1.00%.
REQUISITOS PARA PROPRIEDADES MECÂNICAS (ENSAIO DE TRAÇÃO)
TENSILE REQUIREMENTS
Specification
Grade
Tensile strength
Min.
Max.
Yield strength
Min.
MPa
psi
MPa
psi
MPa
psi
-
-
ASTM A53
NBR 5590
A
205
30,000
330
48,000
B
240
35,000
415
60,000
-
-
DIN EN 10255
-
195
28,282
320
46,412
520
75,420
DIMENSÕES DIN EN 10255
DIMENSIONS DIN EN 10255
Nominal
Diameter
Outside
Diameter
inch
mm
2
2 3/8
60,30
2 1/2
3
76,10
3
3 1/2
88,90
4
4 1/2
114,30
5
5 1/2
139,70
6
6 1/2
165,10
Wall Thickness
inch
0.177
0.142
0.177
0.142
0.197
0.157
0.213
0.177
0.213
0.197
0.213
0.197
mm
4,50
3,60
4,50
3,60
5,00
4,00
5,40
4,50
5,40
5,00
5,40
5,00
Class
H
M
H
M
H
M
H
M
H
M
H
M
Nominal Masses
lb/ft
4.16
3.38
5.34
4.32
6.95
5.63
9.74
8.19
12.02
11.16
14.29
13.26
kg/m
6,19
5,03
7,95
6,44
10,34
8,37
14,50
12,18
17,88
16,61
21,27
19,74
29
DIMENSÕES ASTM A53 / NBR 5590
DIMENSIONS ASTM A53 / NBR 5590
Outside
Diameter
Nominal
Diameter
30
inch
mm
2
2 3/8
60,30
2 1/2
2 7/8
73,00
3
3 1/2
88,90
3 1/2
4
101,60
4
4 1/2
114,30
5
5 9/16
141,30
6
6 5/8
168,30
8
8 5/8
219,10
Wall Thickness
inch
mm
0.154
0.218
0.203
0.276
0.125
0.156
0.188
0.216
0.250
0.281
0.300
0.125
0.156
0.188
0.226
0.250
0.281
0.318
0.125
0.156
0.188
0.219
0.237
0.250
0.281
0.312
0.337
0.156
0.188
0.219
0.258
0.281
0.312
0.344
0.375
0.188
0.219
0.250
0.280
0.312
0.344
0.375
0.432
0.188
0.203
0.219
0.250
0.277
0.289
0.312
0.322
0.344
0.375
0.406
0.438
0.500
3,91
5,54
5,16
7,01
3,18
3,96
4,78
5,49
6,35
7,14
7,62
3,18
3,96
4,78
5,74
6,35
7,14
8,08
3,18
3,96
4,78
5,56
6,02
6,35
7,14
7,92
8,56
3,96
4,78
5,56
6,55
7,14
7,92
8,74
9,52
4,78
5,56
6,35
7,11
7,92
8,74
9,52
10,97
4,78
5,16
5,56
6,35
7,04
7,34
7,92
8,18
8,74
9,52
10,31
11,13
12,70
SCH
40a
80
40a
80
a
a
a
40a
a
a
80
a
a
a
40
a
a
80
a
a
a
a
40a
80
40
80
40
80
20
30
40
60
80
Nominal Masses
lb/ft
kg/m
3.65
5.03
5.80
7.66
4.52
5.57
6.66
7.59
8.69
9.67
10.26
5.19
6.41
7.67
9.12
10.02
11.18
12.52
5.86
7.24
8.67
10.02
10.80
11.36
12.68
13.96
15.00
9.01
10.81
12.51
14.62
15.87
17.50
19.20
20.79
12.95
14.99
17.04
18.99
21.05
23.11
25.05
28.60
16.97
18.29
19.67
22.38
24.74
25.75
27.71
28.59
30.46
33,06
35.67
38.35
43.43
5,44
7,48
8,63
11,41
6,72
8,29
9,92
11,29
12,93
14,40
15,27
7,72
9,53
11,41
13,57
14,92
16,63
18,63
8,71
10,78
12,91
14,91
16,07
16,90
18,87
20,78
22,32
13,41
16,09
18,61
21,77
23,62
26,05
28,57
30,94
19,27
22,31
25,36
28,26
31,32
34,39
37,28
42,56
25,26
27,22
29,28
33,31
36,81
38,33
41,24
42,55
45,34
49,20
53,08
57,08
64,64
NOTE:
a
Under consult
NBR
DIN
ASTM
DIMENSÕES NBR 5580
DIMENSIONS NBR 5580
Nominal
Diameter
2
2 1/2
3
3 1/2
4
2
2 1/2
3
3 1/2
4
2
2 1/2
3
3 1/2
4
5
6
2
2 1/2
3
3 1/2
4
5
6
2
2 1/2
3
3 1/2
4
5
6
2
2 1/2
3
3 1/2
4
5
6
Outside
Diameter
Wall Thickness
Class
Nominal Masses
inch
mm
inch
mm
lb/ft
kg/m
2 3/8
3
3 1/2
4
4 1/2
2 3/8
3
3 1/2
4
4 1/2
2 3/8
3
3 1/2
4
4 1/2
5 1/2
6 1/2
2 3/8
3
3 1/2
4
4 1/2
5 1/2
6 1/2
2 3/8
3
3 1/2
4
4 1/2
5 1/2
6 1/2
2 3/8
3
3 1/2
4
4 1/2
5 1/2
6 1/2
60,30
76,10
88,90
101,60
114,30
60,30
76,10
88,90
101,60
114,30
60,30
76,10
88,90
101,60
114,30
139,70
165,10
60,30
76,10
88,90
101,60
114,30
139,70
165,10
60,30
76,10
88,90
101,60
114,30
139,70
165,10
60,30
76,10
88,90
101,60
114,30
139,70
165,10
0.118
0.132
0.132
0.148
0.148
0.118
0.132
0.132
0.148
0.148
0.148
0.148
0.157
0.167
0.177
0.187
0.197
0.148
0.148
0.157
0.167
0.177
0.187
0.197
0.177
0.177
0.177
0.197
0.220
0.220
0.220
0.177
0.177
0.177
0.197
0.220
0.220
0.220
3,00a
3,35a
3,35a
3,75a
3,75a
3,00a
3,35a
3,35a
3,75a
3,75a
3,75a
3,75a
4,00a
4,25a
4,50
4,75
5,00
3,75a
3,75a
4,00a
4,25a
4,50a
4,75
5,00
4,50a
4,50a
4,50a
5,00a
5,60a
5,60
5,60
4,50a
4,50a
4,50a
5,00a
5,60a
5,60
5,60
2.85
4.04
4.75
6.08
6.87
2.85
4.04
4.75
6.08
6.87
3.51
4.50
5.63
6.86
8.19
10.62
13.26
3.51
4.50
5.63
6.86
8.19
10.62
13.26
4.16
5.34
6.29
8.00
10.09
12.44
14.80
4.16
5.34
6.29
8.00
10.09
12.44
14.80
4,24
6,01
7,07
9,05
10,22
4,24
6,01
7,07
9,05
10,22
5,23
6,69
8,37
10,20
12,18
15,81
19,74
5,23
6,69
8,37
10,20
12,18
15,81
19,74
6,19
7,95
9,37
11,91
15,01
18,52
22,03
6,19
7,95
9,37
11,91
15,01
18,52
22,03
L
L
M
M
P
P
NOTE:
a
Under consult
31
DIMENSÕES NBR 6591
DIMENSIONS NBR 6591
Nominal
Diameter
2
2 1/2
32
Outside
Diameter
inch
2 3/8
mm
60,30
2 7/8
73,00
3
3 1/2
88,90
4
4 1/2
114,30
5
5 9/16
141,30
6
6 5/8
168,30
Wall Thickness
Nominal Masses
inch
mm
lb/ft
Kg/m
0.148
0.167
0.177
0.187
0.197
0.220
0.148
0.167
0.177
0.187
0.197
0.220
0.248
0.280
0.148
0.167
0.187
0.197
0.220
0.248
0.280
0.315
0.148
0.167
0.177
0.187
0.197
0.220
0.248
0.280
0.315
0.148
0.167
0.177
0.187
0.197
0.220
0.248
0.280
0.315
0.148
0.167
0.177
0.187
0.197
0.220
0.248
0.280
0.315
3,75a
4,25a
4,50a
4,75a
5,00a
5,60a
3,75a
4,25a
4,50a
4,75a
5,00a
5,60a
6,30
7,11
3,75a
4,25a
4,75a
5,00a
5,60a
6,30
7,11
8,00
3,75a
4,25a
4,50a
4,75a
5,00a
5,60a
6,30
7,11
8,00
3,75
4,25
4,50
4,75
5,00
5,60
6,30
7,11
8,00
3,75
4,25
4,50
4,75
5,00
5,60
6,30
7,11
8,00
3.51
3.95
4.16
4.37
4.58
5.08
4.30
4.84
5.11
5.37
5.63
6.25
6.96
7.76
5.29
5.96
6.62
6.95
7.73
8.62
9.64
10.72
6.87
7.75
8.19
8.62
9.06
10.09
11.27
12.63
14.09
8.55
9.65
10.20
10.75
11.29
12.59
14.09
15.81
17.67
10.22
11.55
12.21
12.87
13.53
15.10
16.91
18.99
21.25
5,23
5,87
6,19
6,51
6,82
7,55
6,40
7,21
7,60
7,99
8,38
9,31
10,36
11,55
7,87
8,87
9,86
10,34
11,50
12,83
14,34
15,96
10,22
11,53
12,18
12,83
13,48
15,01
16,78
18,79
20,97
12,72
14,36
15,18
15,99
16,81
18,74
20,97
23,53
26,30
15,22
17,19
18,18
19,16
20,13
22,47
25,17
28,26
31,62
NOTE:
a
Under consult
NBR
DIN
ASTM
DIMENSÕES NBR 6591
DIMENSIONS NBR 6591
Nominal
Diameter
Outside
Diameter
inch
mm
7
7
177,80
8
8 5/8
219,10
9
9 5/8
244,48
Wall Thickness
Nominal Masses
inch
mm
lb/ft
Kg/m
0.148
0.167
0.187
0.197
0.220
0.248
0.280
0.315
0.148
0.167
0.177
0.187
0.197
0.220
0.248
0.280
0.315
0.148
0.167
0.177
0.187
0.197
0.220
0.248
0.280
0.315
3,75
4,25
4,75
5,00
5,60
6,30
7,11
8,00
3,75
4,25
4,50
4,75
5,00
5,60
6,30
7,11
8,00
3,75
4,25
4,50
4,75
5,00
5,60
6,30
7,11
8,00
10.81
12.22
13.62
14,32
15.98
17.90
20.11
22.51
13.38
15.13
16.00
16.87
17.74
19.81
22.21
24.97
27.98
14.96
16.92
17.89
18.87
19.84
22.17
24.86
27.96
31.35
16,10
18,19
20,27
21,31
23,78
26,64
29,93
33,50
19,91
22,52
23,81
25,11
26,40
29,48
33,06
37,17
41,65
22,26
25,18
26,63
28,08
29,53
32,99
37,00
41,62
46,65
33
RASTREABILIDADE
TRACEABILITY
Receipt of raw materials and
registration in the system
Online reporting of each step of
the process - coil cutting
Online reporting of each step
of the process - pipe mil
AI570
AI570
Stamp and inspection,
imprinting the number of pipe1
Online reporting of each step
of the process - upsetter2
Released from the forge, pipes
issued with labels and stamps2
12345987154
the process - heat treatment2
Released from the furnace with
labels, bar code and stamp2
the process – threading2
AI570
AI570
Marking, weighing and
measuring the length
(1) Only for OCTG, for Linepipe industrial marker (paint) is used.
(2) Only for OCTG.
34
Packaging with labels on
the pipes and bundles
A força de uma grande parceria
Pelo 2º ano consecutivo nossa empresa é reconhecida pelo Sistema Petrobras
como um de seus principais fornecedores.
A Apolo Tubulars obteve a 1ª colocação na escolha dos melhores fornecedores de Bens e serviços na categoria Materiais e
Equipamentos para Empreendimentos da Unidade de Operações de Exploração e Produção do Rio Grande do Norte e Ceará.
Esse prêmio é um reconhecimento ao amadurecimento da Apolo, empresa comprometida com qualidade e responsabilidade social,
que investe continuamente em capacitação técnica e diversificação do seu portfólio de produtos. É por esse comprometimento que a
empresa já ocupa um lugar de destaque como um dos grandes fornecedores de soluções tubulares no mercado nacional de O&G.
Como resultado do foco em ampliação do seu portfólio de produtos, ainda no biênio 2014/15, a Apolo Tubulars ofertará tubos de
OCTG com conexões premium e semi-premium, além de revestimentos internos e externos específicos para colunas de produção.
The Petrobras System acknowledged our company for the second consecutive year as one of its main suppliers.
Apolo Tubulars achieved the first place in the selection of the best suppliers of Goods and Services, in the Material and
Equipment for the Production and Exploration Operations Unit Enterprises category of Rio Grande do Norte and Ceará.
This award is an acknowledgement of the growth of Apolo, a company committed with the quality and social responsibility,
which continuously invests in technical training and diversification of its products' portfolio. It's due to this commitment that
the company occupies a highlight piace as a major supplier of tubular solutions in the national market of O&G.
As result of the focus in the expansion of its products' portfolio, yet in the biennium 2014/15, the Apolo Tubulars will offer OCTG
pipes with premium and semi-premium connections, besides of internal and external coating specific for oil columns.
www.apolotubulars.com
CONVERSÕES MÉTRICAS
METRIC CONVERSIONS
INSIDE AND OUTSIDE DIAMETERS
PLAIN AND LINEAR MASSES
The US customary values for outside and inside
diameters of pipe and outside diameters of couplings are
converted:
The plain end linear masses can be calculated
(not converted):
Dm = 25.4 x D
where:
Dm = SI diameter, mm
D = diameter, in
P1 = 0.0246615 (Dm - tm) tm
where:
P1 = metric plain end mass/meter, kg/m.
Dm = metric outside diameter, mm.
tm = metric wall thickness, mm.
The SI outside and inside diameters of pipe and
couplings with a specified outside diameter of 6.625 in.
(168.28mm) OD and smaller are rounded to the
(168.28mm) OD are rounded to the nearest 0.1mm.
The SI plain end linear masses is rounded to the
nearest 0.01 kg/m.
WALL THICKNESS
YIELD AND TENSILE STRENGTH
The US customary values for wall thicknesses are
converted:
The US customary values for yield strenght and tensile
strength are converted to SI values using the following
formula:
tm = 25.4 x t
where:
tm = metric wall thickness, mm
t = wall thickness, in.
The SI wall thicknesses are
rounded to the nearest 0.01mm.
ysm = 0.00689476 x ys
tsm = 0.00689476 x ts
where:
ysm = yield strength, MPa
ys = yield strength, psi
tsm = tensile strength, MPa
ts = tensile strength, psi
The SI strengths are rounded to the nearest 1 MPa
DRIFT DIAMETER
CONVERSION FACTORS
The drift diameter is calculated (not converted):
ddm = 25.4 x d - dcm
where:
ddm = drift diameter, mm
d = inside diameter, in
dcm = drift constants, mm, according to API 5CT
36
To Convert
To Convert
25,4
0,3048
645,16
0,45359
1,4882
6,8948
0,00689476
1,3558
5/9 (oF-32)
16387
0,028317
3,7854
0,003785
0,1199
0,02262
0,9072
1,102
0,03937
3,281
0,00155
2,2046
0,67197
0,145026
145,0368
0,73594
32+(9/5 oC)
0,00006102
35,314
0,26417
264,2
8,344
44,207
1,102
0,9072
US Customary
in.
ft.
in.2
lbs
lbs/ft
psi
psi
ft-lb
o
F
in.3
ft.3
gallons
gallons
lb/gal
psi/ft
ton
$/ton
SI Metric
mm
m
mm2
Kg
Kg/m
KPa
MPa
Joules (J)
o
C
mm3
m3
L
m3
Kg/L
MPa/m
tonne
$/tonne
Escritório Comercial / Commercial office
Rua do Passeio, 70 - 9º andar
Centro - Rio de Janeiro / RJ
CEP / Zip code: 20021-290
Tel. / Phone: +55 21 3907-4000 - Fax: +55 21 3907-4018
Fábrica / Factory
Av. Dr. Leo de Affonseca Netto, 750
Jardim Novo Horizonte - Lorena / SP
CEP / Zip code: 12605-720
Tel. / Phone: +55 12 3159-0060
www.apolotubulars.com.br
comercial@apolotubulars.com.br

aptub_001_catalogo_05_ma copy

Transcription

Similar documents

to the Wedding Ring and Bangle Collection