Warranty Information

TABLE OF CONTENTS
5-15 Military & Police
16-21 Black Ops
22-23 Special Ops
24-26 S.W.A.T.
27-28 1st Response
29-31 Border Guard
32-41 Extreme Ops
42-43 Special Tactical
44-49 Folding Knives
50-52 H.R.T.
53 Special Ops fixed blade
54 Search & Rescue
55-56 Homeland Security
57-58 Special Ops fixed blade
59 Outback
60-61 Bullseye
63 Throwing Knives
64 Extraction & Evasion
65 Universal Tool
66-69 Tactical Pens
70-71 Collapsible Batons
Smith & Wesson® and M&P® are registered trademarks of Smith & Wesson Corp. used under licenses by Taylor Brands LLC
Safety Lock
Push Button Release/Locking System
SWMP1600 Models
Automatic M&P® knives are part of the
world-class M&P® line of knives
by Smith & Wesson®
Handle
Aluminum
Steel S30V Stainless Steel
Blade
3.7" (9.4 cm)
Closed
4.8" (12.2 cm)
Weight
4.8 oz.
All models are USA made
automatic opening
Pocket Clip
4
SWMP1600
SWMP1600S
SWMP1600BT
SWMP1600BTS
UPC 028634705153
UPC 028634705160
UPC 028634705177
UPC 028634705184
5
Finger Actuator
Thumb Plate
Glass Breaker
Safety Lock
Liner Lock
SWMP9 Models
Handle
Aluminum
Steel
4034 Stainless Steel
Blade
3.5" (8.9 cm)
Closed
5.0" (12.7 cm)
Weight
7.8 oz.
All models are M.A.G.I.C.
assisted opening
SWMP9B
UPC 028634706662
6
SWMP9BT
SWMP9BCP CLAM PACK UPC 028634706709
Pocket Clip
UPC 028634706686
SWMP9BS
SWMP9BTS
UPC 028634706679
UPC 028634706693
SWMP9BTSCP CLAM PACK UPC 028634706730
7
SWMP6 Models
Thumb Knob
Handle
Aluminum
Steel
4034 Stainless Steel
Blade
3.4" (8.6 cm)
Closed
4.3" (10.9 cm)
Weight
5.5 oz.
All models are M.A.G.I.C.
assisted opening
Liner Lock
Finger Actuator
(Hidden when blade is open)
Safety Lock
Pocket Clip
8
SWMP6
SWMP6S
SWMP6B
SWMP6BS
SWMP6CN
SWMP6CNS
UPC 028634704798
UPC 028634704804
UPC 028634704811
UPC 028634704828
UPC 028634705009
UPC 028634705016
SWMP6CP CLAM PACK
SWMP6CNCP CLAM PACK
SWMP6CNSCP CLAM PACK
UPC 028634704859
UPC 028634705023
UPC 028634705030
9
Finger Actuator
Thumb Knob
Glass Breaker
Safety Lock
Liner Lock
Thumb Knob
SWMP4L Models
SWMP5L Models
Handle
Aluminum
Steel
4034 Stainless Steel
Blade
3.6" (9.1 cm)
Closed
5.0" (12.7 cm)
Weight
7.6 oz.
Handle
Aluminum
Steel
4034 Stainless Steel
Blade
3.5" (8.9 cm)
Closed
5.0" (12.7 cm)
Weight
7.2 oz.
All models are M.A.G.I.C.
assisted opening
All models are M.A.G.I.C.
assisted opening
Liner Lock
Finger Actuator
SWMP5L
UPC 028634702732
SWMP5LCP CLAM PACK UPC 028634703685
Finger Actuator
Safety Lock
Pocket Clip
Glass Breaker
Pocket Clip
10
SWMP4L
SWMP4LS
SWMP4LBS
SWMP5LS
UPC 028634702558
UPC 028634702565
UPC 028634702589
UPC 028634702749
SWMP4LCP CLAM PACK
SWMP4LSCP CLAM PACK
UPC 028634703661
UPC 028634703678
11
Thumb Knob
SWMP1 Models
SWMP2BS
Handle
Aluminum
Steel
4034 Stainless Steel
Blade
2.9" (7.4 cm)
Closed
4.2" (10.7 cm)
Weight
4.1 oz.
Handle
Aluminum
Steel
4034 Stainless Steel
Blade
2.8” (7.1 cm)
Closed
4.2” (10.7 cm)
Weight
4.1 oz.
Thumb Knob
M.A.G.I.C. assisted opening
All models are M.A.G.I.C.
assisted opening
Finger Actuator
Finger Actuator
Liner Lock
Liner Lock
Pocket Clip
Safety Lock
Safety Lock
Pocket Clip
Glass Breaker
Glass Breaker
12
SWMP1
SWMP1B
SWMP1BS
SWMP1BSD
SWMP2BS
UPC 028634701001
UPC 028634701063
UPC 028634701070
UPC 028634701483
UPC 028634701094
SWMP1BCP CLAM PACK
SWMP1BSCP CLAM PACK
UPC 028634703708
UPC 028634703142
13
Thumb Knob
SWMP3 Models
SWMP7TS
SWMP8BS
Handle
Aluminum
Steel
4034 Stainless Steel
Blade
2.8" (7.1 cm)
Closed
4.3" (10.9 cm)
Weight
4.1 oz.
Handle
Handle
Steel
Blade
Closed
Weight
All models are M.A.G.I.C.
assisted opening
Rubber Injected
Aluminum
9Cr17
3.1" (7.8 cm)
4.6" (11.7 cm)
3.2 oz.
Steel
Blade
Closed
Weight
Rubber Injected
Aluminum
9Cr17
3.2" (8.1 cm)
4.6" (11.7 cm)
3.5 oz.
Finger Actuator
Liner Lock
Push Button Lock
Thumb Knob
Thumb Knob
Pocket Clip
Pocket Clip
Pocket Clip
Push Button Lock
Safety Lock
Strap Cutter
Glass Breaker
Glass Breaker
14
SWMP3B
SWMP3BS
SWMP3BSD
SWMP7TS
UPC 028634701100
UPC 028634701117
UPC 028634701520
UPC 028634706167
SWMP3BSCP CLAM PACK
SWMP3BSDCP CLAM PACK
UPC 028634703487
UPC 028634703609
SWMP8BS
SWMP7TSCP CLAM PACK UPC 028634706129
UPC 028634706150
SWMP8BSCP CLAM PACK UPC 028634706112
15
Finger Actuator
Thumb Knob
SWBLOP3TD
UPC 028634706372
SWBLOP3TDCP CLAM PACK
UPC 028634706389
Safety Lock
Liner Lock
SWBLOP3 MODELS
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
3.4" (8.6 cm)
Closed
4.3" (10.9 cm)
Weight
4.8 oz.
All models are M.A.G.I.C.
assisted opening
Pocket Clip
16
SWBLOP3
SWBLOP3S
SWBLOP3R
SWBLOP3RS
SWBLOP3T
SWBLOP3TS
SWBLOP3TBL
SWBLOP3TBLS
UPC 028634703524
UPC 028634703531
UPC 028634704026
UPC 028634704033
UPC 028634703548
UPC 028634703555
UPC 028634704040
UPC 028634704057
SWBLOP3CP CLAM PACK
SWBLOP3SCP CLAM PACK
SWBLOP3TSCP CLAM PACK
UPC 028634704316
UPC 028634704354
UPC 028634704446
17
SWBLOP3SM Models
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
2.5" (6.3 cm)
Closed
3.3" (8.4 cm)
Weight
2.6 oz.
All models are M.A.G.I.C.
assisted opening
Pocket Clip
18
SWBLOP3SMTB
SWBLOP3SMBS
SWBLOP3SMS
SWBLOP3SMT
SWBLOP3SMP
UPC 028634706006
UPC 028634706013
UPC 028634705641
UPC 028634705658
UPC 028634705993
SWBLOP3SMSCP CLAM PACK
SWBLOP3SMPCP CLAM PACK
UPC 028634705702
UPC 028634705795
19
Thumb Knob
Finger Actuator (Hidden when blade is open)
Thumb Hole
Liner Lock
Safety Lock
Finger Actuator (Hidden when blade is open)
SWBLOP2B
Pocket Clip
Reversible Clip
Thumb Knob
UPC 028634702398
Liner Lock
SWBLOP2 Models
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
3.4" (8.6 cm)
Closed
4.3" (10.9 cm)
Weight
4.2 oz.
SWBLOP2BS
UPC 028634702404
Safety Lock
SWBLOP2BSCP CLAM PACK UPC 028634702909
SWBLOP2SMTB
All models are M.A.G.I.C.
assisted opening
Pocket Clip
SWBLOP4
Pocket Clip
UPC 028634705610
20
SWBLOP2SMTBCP CLAM PACK UPC 028634705672
UPC 028634704934
SWBLOP2SM Models
SWBLOP4 Models
SWBLOP2SMBS
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
2.6" (6.6 cm)
Closed
3.3" (8.4 cm)
Weight
2.3 oz.
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
3.3" (8.4 cm)
Closed
4.4" (11.1 cm)
Weight
4.9 oz.
SWBLOP4BS
UPC 028634705603
All models are M.A.G.I.C.
assisted opening
All models are M.A.G.I.C.
assisted opening
UPC 028634704965
SWBLOP2SMBSCP CLAM PACK UPC 028634705665
SWBLOP4CP CLAM PACK UPC 028634704972
SWBLOP4BSCP CLAM PACK UPC 028634704996
21
Finger Actuator
Finger Actuator
Thumb Knob
Thumb Knob
Liner Lock
Liner Lock
Safety Lock
Safety Lock
Pocket Clip
Pocket Clip
BSPECL
UPC 028634701360
SPECM
BSPECLCP CLAM PACK UPC 028634704323
BSPECLS
UPC 028634701377
22
BSPECLSCP CLAM PACK UPC 028634704330
UPC 028634701322
SPECL Models
SPECM Models
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
3.7" (9.4 cm)
Closed
4.8" (12.2 cm)
Weight
6.0 oz.
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
3.1" (8.1 cm)
Closed
4.2" (10.7 cm)
Weight
4.1 oz.
SPECMS
All models are M.A.G.I.C.
assisted opening
All models are M.A.G.I.C.
assisted opening
UPC 028634701339
23
Finger Actuator
Finger Actuator
Thumb Knob
Thumb Knob
Liner Lock
Liner Lock
Safety Lock
Safety Lock
Pocket Clip
24
Pocket Clip
SWATLB
SWATMB
UPC 028634700714
UPC 028634700165
Large SWAT Models
Medium SWAT Models
SWATLBS
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
3.7" (9.5 cm)
Closed
4.8" (12.2 cm)
Weight
5.8 oz.
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
3.2" (8.2 cm)
Closed
4.3" (10.8 cm)
Weight
3.9 oz.
SWATMBS
UPC 028634700721
All models are M.A.G.I.C.
assisted opening
All models are M.A.G.I.C.
assisted opening
UPC 028634700172
SWATMBCP CLAM PACK UPC 028634703722
25
Finger Actuator
Finger Actuator
Thumb Knob
Thumb Knob
Liner Lock
Safety Lock
Safety Lock
Liner Lock
Spring Loaded Glass Punch
Pocket Clip
SW911B
Blade
Closed
3.4" (8.6 cm)
4.8" (12.2 cm)
Weight
UPC
4.9 oz.
028634702176
3.4" (8.6 cm)
4.8" (12.2 cm)
Weight
UPC
4.9 oz.
028634702077
Pocket Clip
26
SWATS
SWATB
SWATBS
UPC 028634700745
UPC 028634700752
UPC 028634700769
SWATSCP CLAM PACK
SWATBCP CLAM PACK
UPC 028634703807
UPC 028634703470
Small SWAT Models
SW911 Models
Handle
Aluminum
Steel 4034 Stainless Steel
Blade
2.5" (6.3 cm)
Closed
3.3" (8.4 cm)
Weight
2.3 oz.
Handle
Nylon Fiber
Steel 4034 Stainless Steel
All models are M.A.G.I.C.
assisted opening
All models are M.A.G.I.C.
assisted opening
SW911N
Blade
Closed
27
Pocket Clip
Glass Breaker
Strap Cutter
Thumb Knob
Liner Lock
SWFR Models
Thumb Plate
Liner Lock
Thumb Knob
Handle
Stainless Steel
w/G-10 Inlay
Steel
7Cr17 High Carbon
Stainless Steel
Blade
3.3" (8.4 cm)
Closed
4.7" (11.9 cm)
Weight
5.8 oz.
Liner Lock
Pocket Clip
SWBG1
Pocket Clip
Strap Cutter
Strap Cutter
Glass Breaker
28
UPC 028634702435
Glass Breaker
SWFR
SWFRS
SWFR2S
UPC 028634700677
UPC 028634700684
UPC 028634701605
SWFRSCP CLAM PACK
SWFR2SCP CLAM PACK
UPC 028634701391
UPC 028634706174
SWFR2S
SWBG1 Models
Handle
Handle
Aluminum
Steel
7Cr17 High Carbon
Stainless Steel
Blade
4.4" (11.2 cm)
Closed
5.6" (14.2 cm)
Weight
8.8 oz.
Special Coated
Aluminum
Steel
7Cr17 High Carbon
Stainless Steel
Blade
3.3" (8.4 cm)
Closed
4.7" (11.9 cm)
Weight
4.4 oz.
SWBG1S
UPC 028634702442
29
Glass Breaker
Thumb Knob
Strap Cutter
SWBG6TS
Handle
Steel
Liner Lock
Thumb Knob
Blade
Closed
Weight
G-10
7Cr17 High Carbon
Stainless Steel
4.2" (10.6 cm)
5.9" (15.0 cm)
9.2 oz.
Liner Lock
Pocket Clip
Pocket Clip
SWBG2T
Strap Cutter
UPC 028634702459
Glass Breaker
SWBG2 Models
SWBG2TS
UPC 028634702466
30
Handle
Aluminum
Steel
7Cr17 High Carbon
Stainless Steel
Blade
4.4" (11.2 cm)
Closed
5.6" (14.2 cm)
Weight
8.8 oz.
SWBG6TS
UPC 028634706266
SWBG6TSCP CLAM PACK UPC 028634706273
31
CKG101BS
CK13T
Handle
Steel
Handle
Steel
Blade
Closed
Weight
G-10
7Cr17 High Carbon
Stainless Steel
3.2" (8.3 cm)
4.5" (11.4 cm)
4.8 oz.
Blade
Closed
Weight
Thumb Knob
CK105 Models
G-10
7Cr17 High Carbon
Stainless Steel
3.3" (8.4 cm)
4.5" (11.4 cm)
3.7 oz.
Handle
Aluminum
Steel
7Cr17 High Carbon
Stainless Steel
Blade
3.2" (8.2 cm)
Closed
4.0" (10.3 cm)
Weight
2.9 oz.
Thumb Knob
Thumb Knob
Liner Lock
Liner Lock
Liner Lock
Pocket Clip
Pocket Clip
Pocket Clip
CKG101BS
UPC 028634010523
32
CK13T
CKG101BSCP CLAM PACK UPC 028634012527
UPC 028634705320
CK13TCP CLAM PACK UPC 028634705115
CK105BK
CK105BL
CK105H
UPC 028634702503
UPC 028634105632
UPC 028634105663
CK105BKCP CLAM PACK
CK105BLCP CLAM PACK
CK105HCP CLAM PACK
UPC 028634704125
UPC 028634105625
UPC 028634105687
33
Thumb Knob
CK105HD
CK105BKEU
Handle
Steel
Handle
Steel
Blade
Closed
Weight
Aluminum
7Cr17 High Carbon
Stainless Steel
3.2" (8.3 cm)
4.2" (10.6 cm)
2.9 oz.
Blade
Closed
Weight
Liner Lock
Aluminum
7Cr17 High Carbon
Stainless Steel
3.4" (8.6 cm)
4.6" (11.7 cm)
4.6 oz.
Thumb Knob
Liner Lock
Pocket Clip
Pocket Clip
Pocket Clip
CK5TBS
Frame Lock
UPC 028634105649
CK5TBSCP CLAM PACK UPC 028634105656
CK5TBS Models
Handle
Steel
CK105HD
UPC 028634000593
34
CK105BKEU
CK105HDCP CLAM PACK UPC 028634705122
UPC 028634703401
Blade
Closed
Weight
Aluminum
7Cr17 High Carbon
Stainless Steel
3.2" (8.3 cm)
4.1" (10.5 cm)
2.9 oz.
CK5TBSD
UPC 028634000616
35
Thumb Knob
Pocket Clip
Liner Lock
CK111
Thumb Knob
UPC 028634700455
Liner Lock
CK111 Models
Handle
Steel
CK111S
Blade
Closed
Weight
UPC 028634700462
Aluminum
7Cr17 High Carbon
Stainless Steel
3.1" (7.8 cm)
4.2" (10.7 cm)
2.8 oz.
Thumb Knob
Pocket Clip
Pocket Clip
Liner Lock
CK112
CK113
UPC 028634702794
UPC 028634702831
CK112S
UPC 028634702800
36
CK112 Models
CK113 Models
Handle
Steel
Handle
Steel
Blade
Closed
Weight
Aluminum
7Cr17 High Carbon
Stainless Steel
3.4" (8.6 cm)
4.5" (11.4 cm)
4.2 oz.
Blade
Closed
Weight
Aluminum
7Cr17 High Carbon
Stainless Steel
2.7" (6.8 cm)
3.7" (9.4 cm)
2.3 oz.
CK113S
UPC 028634702848
37
Thumb Knob
Pocket Clip
Frame Lock
CK110B
UPC 028634700448
SWA24S
SWA25
CK110 Models
Handle
Aluminum
Steel 7Cr17 Stainless Steel
Blade
3.1" (7.9 cm)
Closed
4.0" (10.2 cm)
Weight
3.5 oz.
Handle
Rubber
Steel 7Cr17 Stainless Steel
Blade
3.3" (8.4 cm)
Closed
4.5" (11.4 cm)
Weight
3.2 oz.
Handle
Thumb Knob
Titanium Coated
Stainless Steel
Steel Titanium Coated 7Cr17
High Carbon Stainless Steel
Blade
2.8" (7.1 cm)
Closed
4.0" (10.1 cm)
Weight
3.5 oz.
CK110GL
UPC 028634700431
Thumb Knob
Index
Flipper
Thumb Knob
Liner Lock
Pocket Clip
Pocket Clip
Pocket Clip
Frame Lock
Liner Lock
Finger Actuator
CK11HS
UPC 028634700820
CK10H & CK11H
Handle
Steel
SWA24S
UPC 028634705436
38
SWA25
SWA24SCP CLAM PACK UPC 028634704743
UPC 028634705443
SWA25CP CLAM PACK UPC 028634704750
Blade
Closed
Weight
Stainless Steel
7Cr17 High Carbon
Stainless Steel
3.4" (8.6 cm)
4.4" (11.1 cm)
4.8 oz.
CK10HBS
UPC 028634700806
39
Thumb Knob
Thumb Knob
Liner Lock
Liner Lock
SW423 Models
SWEX Models
Handle
Handle
Titanium Coated
Stainless Steel
Steel Titanium Coated 7Cr17
High Carbon Stainless Steel
Blade
3.2" (8.3 cm)
Closed
4.3" (10.8 cm)
Weight
4.8 oz.
Pocket Clip
SW423B
UPC 028634700783
SW423BS
UPC 028634701650
Steel
Blade
Closed
Weight
Special Coated
Aluminum
7Cr17 High Carbon
Stainless Steel
3.3" (8.4 cm)
4.5" (11.4 cm)
4.6 oz.
Pocket Clip
SW423G
SW423GS
SWEX1
SWEX2S
SWEX2TS
SWEX3
UPC 028634700776
SW423GSCP CLAM PACK
UPC 028634700912
UPC 028634700943
UPC 028634700936
UPC 028634700967
SW423GCP CLAM PACK
UPC 028634704484
UPC 028634701407
40
41
CKTAC Models
Thumb Knob
Index Flipper
Handle
Composite
Steel
7Cr17 High Carbon
Stainless Steel
Blade
3.5" (8.9 cm)
Closed
4.6" (11.7 cm)
Weight
3.5 oz.
Pocket Clip
Liner Lock
42
Finger Actuator
CKTAC
CKTACS
CKTACSD
CKTACB
CKTACBS
CKTACBSD
UPC 028634000753
UPC 028634000760
UPC 028634700233
UPC 028634000777
UPC 028634000784
UPC 028634700240
CKTACSDCP CLAM PACK
CKTACBCP CLAM PACK
CKTACBSCP CLAM PACK
CKTACBSDCP CLAM PACK
UPC 028634704477
UPC 028634700219
UPC 028634700226
UPC 028634704385
43
CK6AEU
SW480BS
CK108
Handle
Steel
Handle
Steel
Handle
Steel
Blade
Closed
Weight
Aluminum
7Cr17 High Carbon
Stainless Steel
3.5" (8.9 cm)
4.6" (11.7 cm)
3.9 oz.
Blade
Closed
Weight
Aluminum
7Cr17 High Carbon
Stainless Steel
3.4" (8.9 cm)
4.7" (12.1 cm)
3.8 oz.
Blade
Closed
Weight
CK109
Handle
Steel
Aluminum
7Cr17 High Carbon
Stainless Steel
2.9" (7.4 cm)
4.3" (10.9 cm)
2.8 oz.
Blade
Closed
Weight
Pocket Clip
Liner Lock
Aluminum
7Cr17 High Carbon
Stainless Steel
3.0" (7.6 cm)
4.4" (11.1 cm)
2.8 oz.
Pocket Clip
Thumb Hole
Thumb Knob
Thumb Knob
Pocket Clip
Pocket Clip
Lock Back
Lock Back
Lock Back
44
CK6AEU
SW480BS
CK108
CK109
UPC 028634701865
UPC 028634700301
UPC 028634700417
UPC 028634700424
45
Thumb Knob
Frame Lock
CH0014
CH0015
Handle
Aluminum
Steel 3Cr13 Stainless Steel
Blade
3.1" (7.8 cm)
Closed
4.5" (11.4 cm)
Weight
4.6 oz.
Handle
Aluminum
Steel 3Cr13 Stainless Steel
Blade
3.5" (8.9 cm)
Closed
4.5" (11.4 cm)
Weight
4.8 oz.
Thumb Knob
Thumb Knob
Liner Lock
Liner Lock
Pocket Clip
Pocket Clip
CKLPB
UPC 028634001422
CKLPBCP CLAM PACK UPC 028634001439
CKLP Models
CKLPR
UPC 028634990689
46
CKLPRCP CLAM PACK UPC 028634990702
Handle
Stainless Steel
Steel
7Cr17 High
Carbon Stainless Steel
Blade
2.3" (5.8 cm)
Overall
3.0" (7.7 cm)
Weight
1.0 oz.
CH0014
CH0015
UPC 028634702206
UPC 028634702213
47
Pocket Clip
Thumb Hole
CH0016
CH0017
Handle
Aluminum
Steel 3Cr13 Stainless Steel
Blade
3.3" (8.3 cm)
Closed
4.6" (11.7 cm)
Weight
4.8 oz.
Handle
Aluminum
Steel 3Cr13 Stainless Steel
Blade
3.3" (8.3 cm)
Closed
4.6" (11.7 cm)
Weight
4.6 oz.
Frame Lock
Finger Hole
CK32C
Handle
Steel
Liner Lock
Thumb Knob
Liner Lock
Pocket Clip
Thumb Knob
Pocket Clip
Blade
Closed
Weight
Titanium Coated
Stainless Steel
7Cr17 High Carbon
Stainless Steel
3.0" (7.6 cm)
5.0" (12.7 cm)
4.7 oz.
CK32C
UPC 028634010394
Pocket Clip
Thumb Knob
Liner Lock
Finger Hole
CH0016
CH0017
UPC 028634702220
UPC 028634702237
CK33
Handle
Steel
Blade
Closed
Weight
48
G-10
7Cr17 High Carbon
Stainless Steel
3.1" (8.0 cm)
4.7" (12.0 cm)
6.8 oz.
CK33
UPC 028634010486
49
False Edge
SWHRT3
SWHRT7T
Handle
Handle Rubber Coated Steel
Steel
7Cr17 High Carbon
Stainless Steel
Blade
4.7" (12.1 cm)
Handle
4.3" (10.9 cm)
Weight
7.2 oz.
Steel
Blade
Handle
Weight
Rubberized
Aluminum
7Cr17 High Carbon
Stainless Steel
3.5" (8.9 cm)
4.0" (10.2 cm)
4.6 oz.
Nylon/Fiberglass
Sheath
50
Nylon/Fiberglass
Sheath
SWHRT3
SWHRT3BF
UPC 028634892303
No Sale CA, NY, MA
UPC 028634892310
Leather Sheath
SWHRT7T
UPC 028634932108
51
SW7 Models
False Edge
Handle
Steel
Blade
Handle
Weight
SWHRT9B Models
Handle
Steel
Blade
Handle
Weight
PPE
7Cr17 High Carbon
Stainless Steel
4.7" (12.1 cm)
4.3" (10.9 cm)
7.7 oz.
PPE
9Cr17 High Carbon
Stainless Steel
5.2" (13.2 cm)
5.4" (13.7 cm)
8.5 oz.
Ambidextrous
Sheath
Leather
Sheath
52
Ambidextrous
Sheath
Leather
Sheath
SWHRT9B
SWHRT9BF
SW7
SW7S
UPC 028634939206
UPC 028634705450
UPC 028634706075
UPC 028634706099
SWHRT9BCP CLAM PACK
SWHRT9BFCP CLAM PACK
SW7CP CLAM PACK
SW7SCP CLAM PACK
UPC 028634703456
No Sale CA, NY, MA
UPC 028634705047
UPC 028634706136
UPC 028634706143
53
CKSUR1
UPC 028634892655
CKSUR Models
CKSUR4 Models
Handle
Handle
Steel
Steel
Blade
Handle
Weight
Rubberized
Aluminum
7Cr17 High Carbon
Stainless Steel
6.0" (15.3 cm)
4.5" (11.4 cm)
7.4 oz.
Blade
Handle
Weight
G-10
7Cr17 High Carbon
Stainless Steel
6.0" (15.2 cm)
5.7" (14.5 cm)
1 lb. 10.0 oz.
Ballistic Sheath
w/Sharpening Stone
Ballistic Sheath
w/Sharpening Stone
Ballistic Sheath
w/Sharpening Stone
CKSUR2
UPC 028634892662
CKSUR2CP CLAM PACK UPC 028634892693
CKSURT
UPC 028634892648
54
CKSURTCP CLAM PACK UPC 028634892679
CKSUR4
CKSUR4N
UPC 028634892761
UPC 028634705399
CKSUR4CP CLAM PACK
CKSUR4NCP CLAM PACK
UPC 028634892778
UPC 028634705139
55
CKSURG
CKSURC
SW1B
SW2B
Handle
G-10
Steel
7Cr17 High Carbon
Stainless Steel
Blade
8.6" (22.0 cm)
Handle
5.1" (13.0 cm)
Weight
1 lb. 14.2 oz.
Handle
G-10
Steel
7Cr17 High Carbon
Stainless Steel
Blade
8.6" (22.0 cm)
Overall
5.1" (13.0 cm)
Weight
1 lb. 14.2 oz.
Handle
Nylon Fiber
Steel 420J2 Stainless Steel
Blade
7.1" (18.1 cm)
Handle
5.1" (13.0 cm)
Weight
14.1 oz.
Handle
Nylon Fiber
Steel 420J2 Stainless Steel
Blade
7.7" (19.5 cm)
Handle
5.1" (13.0 cm)
Weight
14.5 oz.
Ballistic Sheath
w/Sharpening Stone
Ballistic Sheath
w/Sharpening Stone
Scabbard
w/Sharpening Stone
56
Scabbard
w/Sharpening Stone
CKSURG
CKSURC
SW1B
SW2B
UPC 028634892617
UPC 028634892600
UPC 028634700554
UPC 028634700578
57
SW3 Models
Handle
Nylon Fiber
Steel 420J2 Stainless Steel
Blade
7.8" (19.7 cm)
Handle
5.1" (12.9 cm)
Weight
14.6 oz.
SWBH
Handle
Steel
Blade
Handle
Weight
Scabbard
w/Sharpening Stone
Scabbard
w/Sharpening Stone
Rubberized Steel
7Cr17 High Carbon
Stainless Steel
11.9" (30.2 cm)
5.1" (13.0 cm)
1 lb. 0.8 oz.
Nylon Sheath
SW3B
SW3G
SWBH
UPC 028634700592
UPC 028634700608
UPC 028634990818
SW3BCP CLAM PACK
UPC 028634706631
58
59
Nylon Sheath
Nylon Sheath
CH629
SWCAMP
Hatchet/Knife Combo
CH100 and CH200
3 Pc. Camping Set
CK300, CK301 and CH200
(only available in SWCAMP combo)
(only available in SWCAMP combo)
Handles
Rubberized Steel
Steel
7Cr17 High Carbon
Stainless Steel
Handles
Rubberized Steel
Steel
7Cr17 High Carbon
Stainless Steel
CK300
Overall
Weight
CH100
Overall
Weight
CK301
10.7" (27.3 cm)
1 lb. 5.6 oz.
CH200
Overall
Weight
60
10.7" (27.2 cm)
12.5 oz.
Overall
Weight
6.6" (16.8 cm)
2.1 oz.
CH200
9.5" (24.1 cm)
8.9 oz.
Overall
Weight
9.5" (24.1 cm)
8.9 oz.
CH629
SWCAMP
UPC 028634381029
UPC 028634002016
61
SWFS1
Overall
Weight
SWTK8CP
4.2" (10.6 cm)
0.7 oz.
Survival kit including matches,
fishing line/hooks, compass
and fire striker
Includes six - 8" knives
and nylon sheath
SWFS1
SWTK8CP Throwing Knives
UPC 028634704019
UPC 028634706280
SW8
False Edge
UPC 028634706648
Handle
Steel
Overall
Weight
Only Available in Clam Pack
SWTK10CP
Glass Filled Nylon
3Cr13
10.7" (27.2 cm)
8.5 oz.
Steel 2Cr13 Stainless Steel
Overall
10" (25.4 cm)
Weight
4.8 oz.
Includes three - 10" knives
and nylon sheath
SWTK10CP Throwing Knives
SW8
62
Steel 2Cr13 Stainless Steel
Overall
8" (20.3 cm)
Weight
3.4 oz.
SW8CP CLAM PACK UPC 028634706655
UPC 028634706297
Only Available in Clam Pack
63
SW671
SWUAT1
Handle
TPE & Steel
Steel1070 High Carbon Steel
Overall
15.9" (40.4 cm)
Weight
2 lbs. 11.0 oz.
Steel
Overall
Weight
Nylon Sheath
Aluminum
5.1" (13.0 cm)
2.0 oz.
Includes:
• 1/16” Allen Wrench
• 1/16” Roll Tip Punch Pin
• 1/8” Roll Tip Punch Pin
• 1/16” Flat Tip Punch Pin
• 1/8” Flat Tip Punch Pin
• M&P Slave Pin
• 1/8” Solid Punch Pin
• 1/8” Brass Flat Tip Punch Pin
• 1/8” Brass Roll Tip Punch Pin
• 1/32” Cut Tip Punch Pin
• 1/16” Cut Tip Punch Pin
• 1/8” Cut Tip Punch Pin
Molle
Compatible
Sheath
SW671
UPC 028634703432
64
SWUAT1 Universal Armorer Tool
SW671CP CLAM PACK UPC 028634706204
UPC 028634705887
SWUAT1CP CLAM PACK UPC 028634705894
65
SWPENMP2 Models
SWPENMP Models
Material
Material
Overall
Weight
T6061
Aircraft Aluminum
5.8" (14.7 cm)
1.4 oz.
Overall
Weight
T6061
Aircraft Aluminum
6.1" (15.5 cm)
1.4 oz.
Screw cap pen
Pull cap pen
Uses Schmidt P900M
Parker style black ball
point pen refill
Uses Schmidt P900M
Parker style black ball
point pen cartridge
PEN CARTRIDGE UPC
044356206679
SWPENMP2BK
SWPENMPBK
SWPENMP2BL
SWPENMPG
SWPENMP2BR
SWPENMPOD
SWPENMP2G
SWPENMPS
SWPENMP2BK
SWPENMP2BL
SWPENMP2BR
SWPENMP2G
SWPENMPBK
SWPENMPG
SWPENMPOD
SWPENMPS
UPC 028634704897
UPC 028634704927
UPC 028634704903
UPC 028634704910
UPC 028634702961
UPC 028634702978
UPC 028634702985
UPC 028634702992
SWPENMPBKCP CLAM PACK
UPC 028634706211
66
67
This tactical stylus/pen allows you to select, sketch, draw, take notes and
express yourself creatively on most touch screen devices including but not
specific to Apple iPad™, Droid™ smart phones, and Kindle™ eReaders.
When you wish to use the instrument as a normal pen you simply unscrew
the stylus cap exposing the writing tip. The cap can be screwed onto the
opposite end of the pen for easy storage.
SWPEN3 Models
Material
Overall
Weight
T6061
Aircraft Aluminum
5.4" (13.7 cm)
1.6 oz.
SWPEN Models
Material
Overall
Weight
T6061
Aircraft Aluminum
5.7" (14.5 cm)
1.4 oz.
Screw cap pen
Screw cap pen
Uses Schmidt P900M
Parker style black ball
point pen refill
Uses Schmidt P900M
Parker style black ball
point pen refill
PEN CARTRIDGE UPC
044356206679
PEN CARTRIDGE UPC
044356206679
SWPEN3BK
SWPENBK
SWPEN3G
SWPEN3P
SWPENBL
SWPEN3S
68
SWPEN3BK
SWPEN3G
SWPEN3P
SWPEN3S
SWPENBK
SWPENBL
UPC 028634705498
UPC 028634705481
UPC 028634705474
UPC 028634705467
UPC 028634702411
UPC 028634702428
SWPEN3PCP CLAM PACK
SWPEN3SCP CLAM PACK
SWPENBKCP CLAM PACK
UPC 028634705573
UPC 028634705580
UPC 028634703616
69
SWBAT16H
Overall
Handle
Weight
SWBAT21H
16.0" (40.5 cm)
6.6" (16.7 cm)
13.9 oz.
SWBAT24H
Overall
Handle
Weight
SWBAT12B
UPC 028634705863
SWBAT12BCP CLAM PACK UPC 028634705870
21.0" (53.3 cm)
8.2" (20.8 cm)
1 lb. 1.1 oz.
SWBAT26H
24.0" (60.9 cm)
9.2" (23.3 cm)
1 lb. 2.9 oz.
SWBAT12B
SWBAT Models
Steel STKM11A Carbon Steel
Shaft and Handle
Overall
12.1" (30.7 cm)
Handle
5.0" (12.7 cm)
Weight
8.9 oz.
Steel
Includes handheld sheath for
jogging, walking and hiking
Overall
Handle
Weight
Overall
Handle
Weight
26.0" (66.0 cm)
9.7" (24.6 cm)
1 lb. 3.8 oz.
4130 Seamless Alloy
Steel Tubing
Hardness
HRC46-47
Tensile Strength
6638.78 lbf (3011.3 kgf)
Bending Strength
4055.84 lbf (1839.7 kgf)
1680 Denier
Outer Sheath
SWBAT12P
Steel
70
SWBAT12P
STKM11A Carbon
Steel Shaft
7076 T6 Aluminum Handle
Overall
12.1" (30.7 cm)
Handle
5.0" (12.7 cm)
Weight
7.4 oz.
UPC 028634705849
Includes handheld sheath for
jogging, walking and hiking
SWBAT12PCP CLAM PACK UPC 028634705856
SWBAT16H
SWBAT21H
SWBAT24H
SWBAT26H
UPC 028634703012
UPC 028634703029
UPC 028634703036
UPC 028634703043
SWBAT16HCP CLAM PACK
SWBAT21HCP CLAM PACK
SWBAT24HCP CLAM PACK
SWBAT26HCP CLAM PACK
UPC 028634703166
UPC 028634703173
UPC 028634703180
UPC 028634703197
71
longest possible battery life please remove and store batteries from the flashlight
when not in use.
Warning/Caution: In photosensitive epileptic people the strobe function may
trigger seizures.
Any flashlights falling under this limited warranty must be returned for evaluation.
Warranty Information
THE TAYLOR BRANDS ACCESSORY WARRANTY
Taylor Brands LLC has a one (1) limited warranty which covers defects in materials, manufacture or assembly. The warranty does not cover normal wear, damage
caused by abuse, misuse, improper handling, loss, accident, alterations, neglect or
disassembly on any accessories including but not limited to sheaths, sharpeners,
tactical pens and carry and deployment systems. Proof of purchase may be required.
Any accessories falling under this limited warranty must be returned for evaluation.
TAYLOR BRANDS LLC LIMITED LIFETIME WARRANTY
FOR CUTTING TOOLS
This product is warranted to the original consumer purchaser, for as long as he or
she owns this product. Coverage ends if you transfer or sell the product to someone else or if the product is modified in any way. The warranty covers defects in
materials, manufacture or assembly. If one of our products ever breaks or fails due
to material or manufacturing defect we will repair or replace the product.
The warranty does not cover normal wear, damage caused by abuse, misuse,
improper handling, loss, accident, alterations, neglect, disassembly or improper
sharpening. Cosmetic damage which occurs over time and use, such as scratches
on a products finish or coatings on a product rubbing or wearing off are normal
and are not covered by the warranty. Our products rarely fail because of a defect
and in most cases the failure or breakage is due to “tool abuse”. “Tool abuse”, is
when the product is used for unsuitable non intended purposes. Examples would
be using a knife for any other purpose than cutting (pounding, prying, using as
a screwdriver, throwing the knife etc). Multi-purpose tools are not intended to
replace full-sized tools and are for use only on light or moderately heavy-duty applications. Collapsible batons are not pry bars etc. Always use the proper tools for
the proper intended purposes.
Locking systems such as liner locks, safeties, frame locks and lock back mechanisms are
added features designed to help keep the blade in the open position when fully extended. These systems are not designed to take pressure or blows to the backside (dull)
side of the blade and failure of these systems can happen when not used properly. When
a cutting tool/knife is used properly the cutting pressure exerted on the knife blade will
always be against the cutting edge of the blade pushing and keeping the knife blade
open, when used properly it is impossible for the knife to close when cutting.
Misuse of your product can cause serious injury or even death. Misuse often will result in
your product failing and breaking in which cases the Taylor Brands warranty will not apply. Failure to properly maintain your product may cause it’s mechanisms to not function
properly and could also result in injury to you and/or damage to your product. INTERNATIONAL CUSTOMERS
Please take your item(s) to your local dealer where the product was purchased,
ask that they contact Taylor Brands LLC with regard to your defective item and
Taylor Brands LLC will include replacement parts or a replacement item on their
next shipment of goods to our authorized distributor in your area. If you are unable to find a dealer or distributor in your area we ask that you send your item in
for repair/replacement to our facilities following the normal warranty procedure
with the exception that the cost of shipping may be adjusted upon receipt of the
item in order to cover return shipping to your out of country location. THE TAYLOR BRANDS LLC LIGHT WARRANTY
There is a 90-day limited warranty on any LED flashlight produced by Taylor
Brands LLC which covers defects in materials, manufacture or assembly. The
warranty does not cover normal wear, damage caused by abuse, misuse,
improper handling, loss, accident, alterations, neglect or disassembly. Proof of
purchase may be required. Always make sure the flashlight is turned off when not in use. Accidentally leaving
the flashlight on may result in reduced battery life as well as power conductivity. Leaving the flashlight on for extended periods of time may also cause the light to
overheat and could possibly result in injury.
Warning/Caution: Cree LED bulbs project very strong/powerful beams of light. Never shine directly, gaze or stare into the flashlight beam to ensure maximum eye
protection. Batteries should never be exposed to extreme conditions including fire.
Under normal conditions thermal energy will be generated from the use of the
flashlight. Never place or use the flashlight around flammable objects/gases/
liquids/etc. Beams and seals on the flashlight should remain unblocked. For the
72
THE TAYLOR BRANDS COLLAPSIBLE BATON WARRANTY
All Taylor Brands LLC expandable batons are warranted to the original consumer purchaser,
for as long as he or she owns this product. Coverage ends if you transfer or sell the product
to someone else or if the product is modified in any way. This warranty covers defects in
materials, manufacture or assembly and includes a repair or replacement guarantee, under
normal field use, against breaking, bending, torn grip and if rust or corrosion prevents the
batons from functioning. This warranty covers defects in materials, manufacture or assembly. If one of our products ever breaks or fails due to material or manufacturing defect
we will repair or replace the product.
The warranty does not cover normal wear, damage caused by abuse, misuse, improper
handling, loss, accident, alterations, neglect or disassembly. Cosmetic damage which
occurs over time and use, such as scratches on a products finish or coatings on a product rubbing or wearing off are normal and are not covered by the warranty.
off are normal and are not covered by the warranty. Proof of purchase may be
required. Any jewelry falling under this 90 day limited warranty must be returned
for evaluation. Upon receipt jewelry will either be repaired or replaced at Taylor
Brands LLC discretion. If a jewelry piece has been discontinued and repair is not
possible Taylor Brands LLC will replace the product with one of equal value. Jewelry returned to Taylor Brands LLC after the limited warranty has expired and
or due to normal wear and tear will be repaired or replaced at Taylor Brands LLC
discretion for a $20.00 fee. If a jewelry piece has been discontinued at Taylor Brands
discretion we will replace the item with one of equal value or return the original
piece back to the sender.
THE TAYLOR BRANDS BUCKLE WARRANTY
All Taylor Brands LLC buckle products carry a 90 day limited warranty which covers defects in materials, manufacture or assembly. The warranty does not cover
normal wear, damage caused by abuse, misuse, improper handling, loss, accident,
alterations, neglect or disassembly. Cosmetic damage which occurs over time
and use, such as scratches on a products finish or coatings on a product rubbing
or wearing off are normal and are not covered by the warranty. Proof of purchase
may be required. Any buckle falling under this 90 day limited warranty must be returned for evaluation. Upon receipt the buckle will either be repaired or replaced
at Taylor Brands LLC discretion. If a buckle has been discontinued and repair is not
possible Taylor Brands LLC will replace the product with one of equal value. Buckles returned to Taylor Brands LLC after the limited warranty has expired and
or due to normal wear and tear will be repaired or replaced at Taylor Brands LLC
discretion for a $25.00 fee. If a buckle has been discontinued at Taylor Brands
discretion we will replace the item with one of equal value or return the original
piece back to the sender.
MISSING PARTS
Any batons falling under this limited warranty must be returned for evaluation.
To obtain missing parts such as clips and or screws please contact us 800-251-0254
ext 324.
AUTOMATIC KNIVES
HOW TO SEND YOUR TAYLOR BRANDS PRODUCT TO US
Taylor Brands LLC does produce a small range of USA made automatic knives. Any
automatic knife returned to Taylor Brands LLC must include an “Automatic Knife
Opening Acknowledgement Form” or must be returned through an authorized Taylor Brands Dealer/Distributor. To obtain this form please contact Taylor Brands LLC:
If you are having a problem with a Taylor Brands LLC product or accessory which
you believe is the result of a defect in workmanship or materials per the above
warranty statement, here is how to return the item to us:
Taylor Brands LLC
1043 Fordtown Rd.
Kingsport TN 37663
800-251-0254
423-247-2406
Fax 423-247-5371
www.taylorbrandsllc.com
info@taylorbrandsllc.com
Please note Taylor Brands LLC produces a range of non automatic cutting tools featuring push button locking mechanisms. These knives are not sold by Taylor Brands
LLC in automatic form and conversion of these models into automatic knives voids
the Taylor Brands LLC warranty and will not be accepted for repair purposes. Any automatic knife sent in to Taylor Brands will not be returned to the sender without
the signed “Automatic Knife Opening Acknowledgement Form”, NO EXCEPTIONS.
THE TAYLOR BRANDS WATCH WARRANTY
All Taylor Brands LLC watch products carry a one (1) year limited warranty which
covers defects in materials, manufacture or assembly. The warranty does not cover
normal wear, damage caused by abuse, misuse, improper handling, loss, accident,
alterations, neglect or disassembly. Cosmetic damage which occurs over time and
use, such as scratches on a products finish or coatings on a product rubbing or
wearing off are normal and are not covered by the warranty. Proof of purchase may
be required. Any watches falling under this one (1) year limited warranty must be
returned for evaluation. Upon receipt watches will either be repaired or replaced
at Taylor Brands LLC discretion. If a watch model has been discontinued and repair
is not possible Taylor Brands LLC will replace the product with one of equal value. Any watches sent to Taylor Brands LLC after the limited warranty has expired may
be subject to a repair fee. Sender will be contacted for prior approval prior to
Taylor Brands LLC commencing work.
THE TAYLOR BRANDS JEWELRY WARRANTY
All Taylor Brands LLC jewelry products carry a 90 day limited warranty which covers
defects in materials, manufacture or assembly. The warranty does not cover normal
wear, damage caused by abuse, misuse, improper handling, loss, accident, alterations, neglect or disassembly. Cosmetic damage which occurs over time and use,
such as scratches on a products finish or coatings on a product rubbing or wearing
Step 1: Package the product securely and insure it for your own protection
Step 2: Include a note with a brief description of the problem and how it occurred
Step 3: Include your name, telephone number, address and email address if available
Step 4: Send your product or accessory along with a check or money order for
$6.95 per piece to cover return shipping and handling to the address below:
Taylor Brands LLC
1043 Fordtown Rd.
Kingsport TN 37663
800-251-0254
423-247-2406
Fax 423-247-5371
www.taylorbrandsllc.com
info@taylorbrandsllc.com
Attn: Repair Department
Once received we will determine if there is a defect in the materials, manufacture
or assembly of the product. If there is a defect we will repair or replace the product with the same model or one of equal value. Please keep in mind repair is not
always practical or possible, if your product has sentimental value we recommend
not shipping the item to us.
If the problem with the returned product is determined to be caused by something other than a defect in the materials, manufacture or assembly, our repair department will inform you whether the item can be repaired and if so what the cost
of such repair would be. Upon agreement and payment we will repair or replace
the item. If your product has been put to hard use for extended periods of time it
is always possible that the useful life of the product has been exceeded and we will
not be able to repair or replace the item. In such cases we recommend retiring the
item and we will return it to you (all costs associated with the return shipment of
the product are the responsibility of the customer).
RELEASE, ASSUMPTION OF RISK, WAIVER OF LIABILITY
AND INDEMNITY AGREEMENT
By purchasing any item produced by Taylor Brands LLC the buyer assumes responsibility to ascertain and follow all applicable international, federal, state and
local laws in owning, carrying, having, shipping, transporting and using any Taylor
Brands LLC product. The buyer expressly agrees to indemnify and hold harmless
Taylor Brands LLC for all claims resulting directly or indirectly from the ownership,
purchase, transportation or use of the item in violation of applicable federal, state
and local laws or regulations. Taylor Brands LLC is not liable for misuse of any
Taylor Brands LLC product purchased either directly from Taylor Brands LLC or from
a dealer/distributor. You must be 18 years of age to purchase Taylor Brands LLC
products. Taylor Brands LLC warranty gives you certain legal rights. You may have
other rights, which vary in different states and municipalities.
Trademarks and Patents
TRADEMARK INFORMATION
The following are pending, registered and/or common law trademarks & associated
logos of Taylor brands, LLC, Kingsport, Tennessee: (Alphabetically):
1ST RESPONSE
24/7
ADVANT-EDGE
AQUANUT
BLACK OPS
BOMB TECH
BORDER GUARD
BULLSEYE
CHEROKEE
CLIPHANGER
CODE OF THE WEST
CUTTIN’ HORSE
DURA EDGE
ELK HORN
ELK HUNTER
EXTRACTION & EVASION
EXTREME OPS
EVERLASTINGLY SHARP
FIELD HAND
FIELD SKINNER
FRONTIER
GOLDEN BEAR
GUIDE MASTER
H.R.T.
HAMMER BRAND
HOMELAND SECURITY
IMPERIAL SCHRADE
JACK-MASTER
LA CUISINE
LAND SHARK
LITTLE PAL
MULTI-SHEAR
NAVITOOL
NEW YORK KNIFE CO.
NITRO
OASIS
OLD TIMER
OUTBACK
OWL HEAD
PHANTOM
POCKET PROTECTOR
PRO HUNTER
PROFESSIONALS
QUE-N-SKEW
S.O.R.T.
S.W.A.T.
SAFE-T-GRIP
SAINT HUBERTUS
SCHRADE
SCHRADE CLIPHANGER SYSTEM
SCHRADE EXTREME SURVIVAL
SCHRADE OFF ROAD
SCHRADE TOUGH
SCHRADE WALDEN
SCHRADE WATER RAT
SCHRADE WESTERN EDGE
SEASWEPT
SEARCH & RESCUE
SHARP FINGER
SPECIAL OPS
SPECIAL TACTICAL
STAGLON
SWITCH-IT
TAYLOR BRANDS LLC
TAYLOR BRANDS
TEXAS HOLD ‘EM
THE RANCHER
TOTEM POLE
TRACTOR UP
TRADESMAN
ULSTER
UNCLE HENRY
URBAN TITANIUM CAMO
VERI-SHARP
VIPER
WALDEN KNIFE CO.
WESTERN EDGE
X-TIMER
ZYLITE
Associated product configurations and designs including the registered designs/product
configurations of U.S. Reg. Nos. 2,984,344, 3,506,417, 3,691,152, and 3,368,278.
PATENT INFORMATION
The products of Taylor Brands, LLC, Kingsport, Tennessee may be covered by one or
more of the following United States utility and design patents (other patents pending):
Utility: 5781950, 5791002, 5963999, 6219870, 6308420, 6550142, 6578745,
6618947, 6651344, 6810588, 7111402, 7125145, 7797838, 8065803, 8069570,
8292701, 8323077, 8348539
Design: D396618, D401133, D406030, D409893, D426139, D448685, D449009,
D454769, D456687, D457412, D459188, D461422, D462017, D466785, D469365,
D469366, D482257, D482258, D505057, D512624, D519018, D539616, D539631,
D554964, D560460, D561295, D561554, D562102, D562932, D578857, D599640,
D599641, D600090, D613145, D613438, D627852, D630292, D632154, D632539,
D632755, D646324, D647562, D647563, D647963, D651647, D652081, D660676,
D670149, D685848, D688933, D689934, D692289, D692480
73
STEEL INFORMATION
KNIFE STEEL SELECTION CHART
Taylor Brands uses specific blade steels to create the most efficient balance of
properties based on the anticipated applications of our products.
Steel is an alloy of iron, other metals, and carbon. Stainless steel refers to a family
of corrosion-resistant alloy steels which contain of a minimum of 10.5% chromium.
A common misconception is that stainless steels will not stain, rust, or corrode,
stainless steels will simply stain less than other steels that do not contain chromium. Each alloy in the various steels lends unique properties to the stainless steel.
and final hardness levels keep an edge longer they also will make it more difficult
to field sharpen a blade. Some alloys can be found to be low in nickel, which will
result in increased staining if not kept regularly oiled and cleaned after use. Knives
that will be placed to hard use must be constructed with very tough steel materials
so we will use steels that are considered to have high ductility (or toughness) over
a higher hardened steel. Please note that final hardness levels are achieved not
only by factors of composition but from proper heat treating and quenching, of
which we pay great attention.
When selecting the steel for the various products we factor in the overall performance requirements of what the tool will be used for, the goal price range for the
end product, and the costs of manufacturing and finishing the item(s). As with
any materials there are generally trade-offs. For instance while higher alloy levels
Taylor Brands sources premium steel from many international suppliers. The
information chart referenced below shows a reasonable range of the compositions
of the various steels we utilize. The blade steel we use for each product is included
in the catalog to help make this information easy for you to locate.
Stainless Steel Alloy Specifications
Steel
HCR
C
CR
MN
MO
1070
54-56
.70
0.75
0.04
0.05
1095
57-59
0.90-1.03
0.30-0.50
0.04
0.05
4034
56-58
0.43-0.50
13.08
1
4116
55-57
.45-.55
14-15
1
420J2
52-55
0.26-0.40
12-14
1
2Cr13
51-53
0.16-0.25
12-14
1
3Cr13
52-55
0.26-0.35
12-14
1
7Cr17MoV
54-56
0.68
16.5
0.5
0.5
8Cr13MoV
58-59
0.8
13
0.40
0.15
9Cr14MoV
57-59
0.897
13.7
0.391
0.218
9Cr18MoV
58-60
0.95-1.20
16-18
0.80
0.75
AUS-8
58-59
0.70-0.75
13-14.5
0.50
0.10-0.30
D2
59-60
1.55
11.5
0.35
0.9
SK5
57-58
0.80-0.90
S30V
59.5-61
1.05
NI
P
0.14
0.5
S
V
0.04
1
0.015
1
0.015
0.04
1
0.035
1
0.04
1
0.035
0.5
0.015
0.20
0.02
0.50
0.1
0.167
0.026
0.427
0.008
0.109
0.04
1
0.04
1
0.10-0.26
0.10-0.26
0.60
0.49
0.1-0.2
0.03
0.12
0.8
0.35
2
.50
4
Various Benefits of Elements Used in Stainless Steels
Element
Increases
Corrosion
Resistance
Increases
Hardness
X
X
X
X
X
Carbon
Chromium
X
Manganese
Molybdenum
Nickel
X
X
Increases
Hardenability
Increases
Tensile
Strengh
Increases Edge
Retention
X
X
X
X
Increases
Impact
Strength
Increases
Toughness
Increases Wear
& Abrasion
Resistance
X
X
X
X
X
X
X
Silicon
X
X
4116: A fine grained stainless steel. The balance of carbon and chromium content give
it a high degree of corrosion resistance and also impressive physical characteristics of
strength and edge holding. Edge retention in actual cutting tests exceeded blades
make of 420 and 440 series of stainless steels. Other alloying elements contribute to
grain refinement which increase blade strength and edge toughness and also allow for
a finer, sharper edge.
2Cr13: A good quality stainless steel commonly used in knife blades as well as for impact cutting tools such as axes, hatchets, and machetes. Known as a hard, strong steel,
this steel has decent edge holding capabilities and is easy to resharpen.
3Cr13: A good quality stainless steel commonly used in knife blades as well as for
impact cutting tools such as axes, hatchets, and machetes. Known as a hard, strong
steel, this steel has decent edge holding capabilities and is easy to resharpen, sticking
a good balance of the most desirable traits for knife steel.
8Cr13MoV: A high quality stainless steel similar in properties to AUS-8. This steel
exhibits extreme toughness and excellent edge retaining capabilities.
9Cr14MoV: A high quality stainless steel this steel has good corrosion resistance and
excellent edge retaining capabilities.
9Cr18MoV: A higher end stainless steel commonly used in precision surgical instruments. This steel has good corrosion resistance and excellent edge retaining capabilities.
AUS-8: A very high quality stainless steel known for extreme toughness and excellent edge
retaining capabilities. This steel has great corrosion resistance and is easy to sharpen.
D2: An air hardened tool steel. Sometimes called a “semi-stainless” steel because it
does contain 12% Chromium. This steel offers exceptional edge retention as well as
decent corrosion resistance. Somewhat difficult to sharpen this steel can be finished
to a high polish shine.
SK5: The Japanese equivalent of American 1080 steel, a high carbon steel with carbon
between 0.75%-0.85% and 0.60%-0.90% manganese. This grade of steel has an ideal
balance of very good blade toughness with superior edge holding ability and is used
in a variety of hand tools and cutting products.
S30V: This steel contains carbon along with high amounts of chromium, molybdenum, and vanadium. Double tempered for hardness and edge retention this steel has
excellent corrosion resistance but is somewhat difficult to sharpen.
Ceramic: A ceramic is a inorganic, nonmetallic solid prepared by the action of heat
and subsequent cooling. When used in the application of a knife blade the ceramic
material will stay sharp for much longer than that of steel knife. The only drawback is
the ceramic material is more brittle than steel and can snap from a hard impact.
X
Vanadium
4034: A good quality grade of stainless steel. This steel is known for its ability to be
honed to a razor sharp edge. While this steel has medium edge retention it is a very
easy steel to field sharpen. A choice steel to use for an everyday carry product.
7Cr17MoV: A good quality stainless steel that has a high tensile strength. This steel is
has excellent corrosion resistance and can be honed to a razor sharp edge.
0.45
0.03
1095: This is a plain carbon steel which means it has a low resistance to corrosion
and low to medium edge retention. The benefit of this steel is that it is very easy to
sharpen and will take an extremely sharp edge.
420J2: A good quality stainless steel commonly used in knife blades as well as for
impact cutting tools such as axes, hatchets, and machetes. Known as a hard, strong
steel, this steel has decent edge holding capabilities and is easy to resharpen , sticking
a good balance of the most desirable traits for knife steel.
0.04
0.5-0.8
0.50
14
SI
1070: This is a plain carbon steel which means it has a low resistance to corrosion
and low to medium edge retention. The benefit of this steel is that it is very easy to
sharpen and will take an extremely sharp edge.
X
HANDLE & SHEATH MATERIALS
Tough
USA
420HC/425MOD
China
2Cr13/3Cr13
Europe
74
All-Purpose
440A
5Cr15MoV/6Cr13
7Cr17MoV
Edge Hold
440C/154CM
8Cr13MoV
9Cr14MoV/9Cr18MoV
AUS-8
AUS-10/ATS34
58-60
57-60
S30V
420J2
AUS-6/4034
Hardness (HRC)
51-55
55-58
57-59
Staglon Handle Scales: This lightweight and durable polymer engineered for its excellent
long-term wear characteristics. Cosmetically designed to mimic Stag Horn.
Aluminum: Relatively soft, durable, lightweight, corrosion resistant, non-metallic metal.
Aluminum has about one-third the density and stiffness of steel and is easily machined,
cast, drawn and extruded.
4116
Taiwan/Japan
Saw Cut OT Handle Scales: This lightweight and durable polymer was engineered for its
excellent long-term wear characteristics.
59-61
TPE: This black thermoplastic elastomer is basically a softer version of TPR and offers a
superb flexibility and memory elasticity even under harsh conditions. Most often molded
onto a harder sub structure TPE material offers excellent grip and comfort.
TPR: This thermoplastic rubber is best described as a material which has both the
characteristics of rubber as well as plastic. TPR rubber is usually light in weight, has
good tear strength, flexible on low temperature, weather resistant, reusable and
recyclable and it performs like vulcanized rubber.
PA: A plastic material Polyamides (PA) are semi-crystalline polymers. Polyamides have very
good mechanical properties, are particularly tough, and have excellent sliding and wear
characteristics. Properties vary from the hard and tough PA 66 to the soft and flexible PA
12. Depending on the type, polyamides absorb different amounts of moisture which also
affect the mechanical characteristics.
PP: Polypropylene (PP) is a thermoplastic polymer used in a wide variety of applications.
Commonly used in manufacturing processes such as injection molding.
Carbon Fiber: This material is a woven composite of graphite fibers fused together with
an epoxy resin. The result is an ultra light weight handle with an extreme tensile strength.
Most often seen with a visible weave-like patterns which can be varied as can the color of
the epoxy used.
G-10: An epoxy filled woven “E” glass composite, reinforced with glass fibers for strength.
Originally designed for circuit boards G-10 offers the knife industry a handle which is
impervious to most elements such as oils, water, and acids. It can be produced in many
colors, and finished in a variety of ways, offering different amounts of texture matched to
different end users.
Micarta: Technically described as “fabric reinforced phenolic laminate”, micarta is created by
pouring a resin into a flat pan, then laying down a strip of linen or paper fabric, which then is
saturated with a resin. This process is repeated until the desired thickness is achieved. Micarta
can be in many different colors, is lightweight, and can be finished in many ways.
Nylon Fiber: A synthetic thermoplastic polymer. Engineering grade nylon fiber is processed by extrusion, casting, and injection molding and is available in glass-filled variants
which increase structural and impact strength and rigidity.
Stainless Steel: A steel alloy with a minimum of 10.5% chromium. Stainless steel does
not readily corrode, rust, or stain with water as ordinary steel does, it is not stain proof but
rather stains less.
Titanium: A chemical element with the symbol Ti. It is a lustrous transition metal with a
silver color, low density, and high strength. Two of the most useful properties of the metal
are corrosion resistance and the highest strength-to-weight ratio of any metal.