Z-Pod Series

SIMKAR ENERGY SOLUTIONS
Z-Pod Series
The Z Pod lighting system is
equipped with the most
technologically advanced
electronic ballast available for
pulse start metal halide. Z Pod
offers the reliability of
microprocessor operation with
features and performance superior
to conventional pulse start metal
halide ballasts.
The electronic pulse start ballast
provides a controlled start up of
less than one minute for cold
lamps, and restrike times are
approximately four minutes, 60%
faster than conventional magnetic
ballasted metal halide.
Shortened start-up time
Features
Benefits
Microprocessor
ballast operation
Detects thermal &
voltage variations
Electronic HID
Sound rated A
Less than 15%
haromonic distortion
Start up
Less than one minute for
cold lamps to reach full
light output
Restrike time
Approximately four
minutes - 1/3 the time
of conventional probe
start metal halide
Pulse start lamp
technology
Maintains color
uniformity over lamp
life & dimming range
56% increase in mean
lumens vs. probe start
metal halide
Dimming capability
Improved lumen
maintenance
Virtually unlimited
continuous dimming
capabillities to 50%
of the nominal lamp
wattage and light output
50% improvement in
lumen maintenance over
conventional probe start
metal halide
Faster
restrike
Improved lumen
maintenance
over life of
the lamp
Maintained
color
uniformity
Dimmable
ZC Series Ordering Information
Series
Reflector
Size
ZCS
17”
ZCL
22”
Wattage
Lamp
Enclosed Rated
Lamp / Slide-Box
Enclosed Rated Lamp,
Hook, Cord & Plug
Open Rated
Lamp, Slide-Box
Open Rated Lamp
Hook, Cord & Plug
250W MH/PS
320W MH/PS
350W MH/PS
400W MH/PS
ZCS0825-(a)L(b)*
ZCS0832-(a)L(b)*
ZCS0835-(a)L(b)*
ZCS0840-(a)L(b)*
ZCS2825-(a)L(b)*
ZCS2832-(a)L(b)*
ZCS2835-(a)L(b)*
ZCS2840-(a)L(b)*
ZCS0925-(a)L(b)*
ZCS0932-(a)(b)
ZCS0935-(a)(b)
ZCS0940-(a)(b)
ZCS2925-(a)L(b)*
ZCS2932-(a)(b)
ZCS2935-(a)(b)
ZCS2940-(a)(b)
320W MH/PS
350W MH/PS
400W MH/PS
ZCL0832-(a)L(b)*
ZCL0835-(a)L(b)*
ZCL0840-(a)L(b)*
ZCL2832-(a)L(b)*
ZCL2835-(a)L(b)*
ZCL2840-(a)L(b)*
ZCL0932-(a)(b)
ZCL0935-(a)(b)
ZCL0940-(a)(b)
ZCL2932-(a)(b)
ZCL2935-(a)(b)
ZCL2940-(a)(b)
Voltage (a)
Options (b) (Factory Installed)
Accessories (Field Installed)
A = Auto Voltage Input (standard)
200-277V
C = Coated Lamp
L = Flat lens assembly included on * fixtures
Q = Quartz Standby
Flat Glass Lens - 17” & 22”
Options & Accessories on page 188
For units with hook, cord & plug,
specify voltage:
1 = 120V
2 = 277V
3 = 208V
4 = 240V
Wire Guard - 17”& 22”
Options & Accessories on page 188
A HK SC = Mounting Hook - 3/4” Thread with Safety
Snap-Lock™
DMC-1 = Dimming Module Electronic Controllers on page
156
CX-100 = Passive infrared occupancy sensor on page 154
B-120E-P = 1 20V Power Supply Electronic Controllers on
page 157
B-277E-P = 2 77V Power Supply Electronic Controllers on
page 159
See page 188 for complete listing of all lens assemblies and guard options.
* Includes bottom lens assembly plus appropriate cost adder
300
Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com
Z-Pod Series
Series
Reflector
Size
ZLS
16”
ZLM
22”
Wattage /
Lamp
250W MH/PS
320W MH/PS
350W MH/PS
400W MH/PS
320W MH/PS
350W MH/PS
400W MH/PS
ZLL
25”
350W MH/PS
400W MH/PS
Enclosed Rated
Lamp Slide-Box
Enclosed Rated Lamp
Hook, Cord & Plug
Open Rated Lamp
Slide-Box
Open Rated Lamp
Hook, Cord & Plug
ZLS0825-(a)L(b)*
ZLS2825-(a)L(b)*
ZLS0925-(a)(b)
ZLS0932-(a)(b)
ZLS0935-(a)(b)
ZLS0940-(a)(b)
ZLS2925-(a)(b)
ZLS2932-(a)(b)
ZLS2935-(a)(b)
ZLS2940-(a)(b)
ZLM2832-(a)L(b)*
ZLM0932-(a)(b)
ZLM2932-(a)(b)
ZLM2835-(a)L(b)*
ZLM0935-(a)(b)
ZLM2935-(a)(b)
ZLM2840-(a)L(b)*
ZLM0940-(a)(b)
ZLM2940-(a)(b)
ZLL2835-(a)L(b)*
ZLL2840-(a)L(b)*
ZLL0935-(a)(b)
ZLL0940-(a)(b)
ZLL2935-(a)(b)
ZLL2940-(a)(b)
ZLM0832-(a)
L(b)*
ZLM0835-(a)
L(b)*
ZLM0840-(a)
L(b)*
ZLL0835-(a)L(b)*
ZLL0840-(a)L(b)*
SIMKAR ENERGY SOLUTIONS
ZL Series Ordering Information
ZCS
17” Faceted Reflector
ZCL
22” Faceted Reflector
* Includes bottom lens assembly plus appropriate cost adder
Voltage Suffix Key (a)
Options (b) (Factory Installed)
Options and Accessories (Field Installed)
A = Auto Voltage Input (standard)
120-277V (250)
200-277V (320-400)
C = Coated Lamp*
Q = Q uartz Standby
*Coated lamps are recommended.
Maximum effectiveness is achieved
through the use of coated lamps that
reduce glare.
Options & Accessories on page 188
For units with hook, cord & plug,
specify voltage:
1 = 120V
2 = 277V
3 = 208V
4 = 240V
ZLS
Conical Lens - 22” & 25”
Flat Acrylic Lens -22”
Acrylic Drop Lens - 22” (up to 400W)
Aislelighter Lens - 25” (ZLL up to 400W only)
Wire Guard - 16”, 22” & 25”
Full Wire Guard - 16”, 22” & 25”
Drop Lens w/Wire Guard - 22”
A HK SC = Mounting Hook - 3/4” Thread with Safety Snap-Lock™
16” Prismatic Reflector
DMC-1 = D imming Module Electronic Controllers on page 156
CX-100 = Passive infrared occupancy sensor on page 157
B-120E-P = 1 20V Power Supply Electronic Controllers on page 159
B-277E-P = 2 77V Power Supply Electronic Controllers on page 159
ZLM
22” Prismatic Reflector
ZLL
25” PrismaticReflector
5 Optical Configurations
Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com
301