Safety Valves and DIN EN Valves for Industrial Applications

Transcription

Safety Valves and DIN EN Valves for Industrial Applications
INDUSTRY
2016
Safety Valves and DIN EN Valves
for Industrial Applications
herose.com
HEROSE worldwide
HEROSE
Germany
HEROSE UK
HEROSE China
HEROSE
Iberica
HEROSE India
For the adresses of our agencies/distributors
please visit www.herose.com
Headquarter Germany
HEROSE GMBH
Elly-Heuss-Knapp-Strasse 12
23843 Bad Oldesloe
Germany
Phone: +49 4531 509-0
Fax:
+49 4531 509-120
info@herose.com
International Subsidiaries
United Kingdom
HEROSE Ltd.
3 Lindley Road
Finningley/Doncaster
DN9 3DQ/U.K.
Mr. Keith Stewart
Phone: +44 1302 773 114
Fax:
+44 1302 773 333
keith.stewart@herose.co.uk
www.herose.co.uk
Spain
HEROSE Iberica S.L.
Deu i Mata, 117-121. 1- 5.
08029 Barcelona, Spain
Mr. Javier Gorriz
Phone: +34 662 625-614
Fax: +34 937 894-759
ofertas@herose.es
www.herose.es
P.R. China
HEROSE Trading Co., Ltd.
Wanda Road 41-16#, Building 33
Jingang Industrial Park
Dalian Economy & Technology
Development Zone
Dalian 116600, China
Mr. Guoyong Zhou
Phone: +86 411 6616 4388
Fax: +86 411 6616 4399
info@herose.cn
www.herose.cn
All rights reserved, subject to errata and printing errors
2
India
HEROSE India
IGEP Foundation, 630 - 636
6th Floor, Apparel House
Sector-44, Gurgaon
Haryana-122003 India
Mr. Sankalp Tiwari
Phone: +91 124 404 8273-77
Mobile: +91 98 1839 0222
tiwari.herose@igep.org
www.herose.com
Edition 2016-01
Phone: +49 4531 509-0
Main Content
Company
4
Content
7
Safety and Overflow Valves
for General Industrial Use
13
Safety Valves
14
Overflow Valves
98
DIN EN Valves for Industrial Use
111
Globe Valves
112
Gate Valves
117
Angle Valves
122
Needle Valves
123
Self Closing Globe Valves
124
Control Valves
125
Check Valves
127
Pressure Reducing Valves
134
Strainer
139
General Information
142
herose.com
3
Sicherheit, Vertrauen und Stärke sind
as Ergebnis harter Arbeit! Stimmen Sie zu?
Company
auf Ihr Vertrauen setzen?
erlebt, gelesen, gehört.
shalb optimale Sicherheit mit
öchsten Stand der Technik.
erdurchschnittlichen Investirschung und Entwicklung mit
gement, das auf die größtmöglindige Verbesserung setzt.
Throughout the world, HEROSE provides its customers with safety
for handling technical gases, vapours and liquids in cryogenic
applications and pressure vessels. With more than 140 years
n?
eiter, die Leidenschaft und Neuin the development, manufacture and sale of valves
icherheit leben.experience
Sie bekommen
, die sich seit Jahrzehnten in
with a high level of innovation and modern production with certified quality management, HEROSE is one of the world‘s leading
tige Beweise?
duzierten Armaturen pro Jahr
Das HEROSE Firmengebäude in Bad Oldesloe
manufacturers
of valves for industry and cryogenic applications.
nur in weniger als 100 Fällen
zent – zu Beanstandungen.
HEROSE
employs
around 200 employees and supplies to over
f eine überdurchschnittliche
80 countries worldwide.
Products
06.10.2005 15:17:42 Uhr
HEROSE offers a complete product range of globe, check
and control valves as well as safety valves for cryogenic
liquefied industrial gases like oxygen, nitrogen, hydrogen
at temperatures down to –270° C (3 K) and for liquefied
natural gas (LNG).
Additional HEROSE offers a large range of nonferrous
safety valves for general industrial applications and DIN
EN standard valves for engineering and plant construction
industries.
High Quality
No compromise on material selection, production
and functional testing guarantee a hundred percent
consistently high quality „Made in Germany“.
4
Phone: +49 4531 509-0
© DJ Fotolia.com
Frequently HEROSE offers trainings with integrated
test lab demonstrations
Foto: KNORR
Headquarter in Bad Oldesloe – on more than 10,000 m² production and office area nearly 400,000
valves are produced every year
HEROSE supplies valves for a wide range of industrial gas storage vessels from 180 to 500,000
litres and for larger LNG-vessels built on site
HEROSE-industrial safety valves are also used in
the air supply unit of the breaking system for the
high speed train Velaro RUS
HEROSE-valves for oil cooled transformers are
proved to be used under the extreme climatic
conditions for power generation at offshore sites
Material analysis and identification during the
incoming goods check
100 % tightness test of the valves at design
pressure
Continuous quality checks within the scope of
the operator self check
Edition 2016-01
herose.com
5
Product Catalogues at a glance
CRYOGENIC
CRYOGENIC
2015
Cryogenic Valves
>
Valves and Safety Valves for
Storage and Transportation of Cryogenic Gases
Firesafe and Offshore Applications
herose.com
INDUSTRY
INDUSTRY
2015
Safety Valves and DIN EN Valves
for Industrial Applications
>
Valves for Industrial Applications
Safety Valves and Overflow Valves
DIN EN Valves
herose.com
ENERGY
ENERGY
2015
Valves for oil-immersed transformers
herose.com
6
>
Valves for oil-immersed Transformers for
Onshore Applications
Offshore Applications
Low Temperature Applications
Phone: +49 4531 509-0
Safety and Overflow Valves
Content
Abbreviations: in column Medium - type tested for
S = Steams, G = Gases, L = Liquids
Threaded Safety Valves with discharge holes, spring loaded
Type
Inlet
Medium
06205
Male thread
1/4'' up to 1-1/4''
Male thread
1/2'' up to 2''
Male thread
1/2'' up to 2''
1/2'' up to 2''
S/G
06216,
06217
06216,
06217
55177
06218,
06219
06505
06506
Male thread
1/4'' up to 3/4''
Male thread
1'' up to 2''
Male thread
1'' up to 1-1/2''
Temperature
-20°C - +160°C
253K - 433K
S/G
-40°C - +200°C
233K - 473K
S/G
-30°C - +130°C
243K - 403K
S/G
-30°C - +130°C
243K - 403K
S/G
-60°C - +150°C
213K - 423K
Liquid Granu- -40°C - +200°C
late Powder 233K - 473K
Liquid Granu- -40°C - +200°C
late Powder 233K - 473K
Set
range
pressure
0.2 - 43.0 bar
2.9 - 623.6 PSI
0.2 - 30.0 bar
2.9 - 435.1 PSI
0.2 - 30.0 bar
2.9 - 435.1 PSI
0.2 - 30.0 bar
2.9 - 435.1 PSI
3.0 - 17.0 bar
43.5 - 246.5 PSI
0.5 - 6.0 bar
7.3 - 87.0 PSI
0.5 - 6.0 bar
7.3 - 87.0 PSI
Approval
Page
TÜV-SV
1090
ASME
1090
✓
16/17
1090
✓
18/19
14/15
1090
20
1090
22/23
948
24/25
948
26/27
Threaded Safety Valves, angle type, spring loaded
Type
Inlet
Medium
Temperature
Set
range
06310
Male thread
3/4'' up to 1''
Male thread
3/4'' up to 1''
Male thread
1/2'' up to 3/4''
Male thread
1/2'' up to 3/4''
Male thread
3/8'' up to 1-1/4''
Male thread
3/8'' up to 1-1/4''
Male thread
3/8'' up to 1-1/4''
Female thread
1-1/2'' up to 2''
Female thread
3/4''
Female thread
1/2'' up to 1-1/4''
Female thread
1/2'' up to 2''
Female thread
1/2''
S/G/L
-10°C - +300°C
263K - 573K
-196°C - +300°C
77K - 573K
-10°C - +220°C
263K - 493K
-270°C - +280°C
3K - 553K
-60°C - +280°C
213K - 553K
-10°C - +200°C
263K - 473K
-200°C - +280°C
73K - 553K
-10°C - +110°C
263K - 383K
-10°C - +120°C
263K - 393K
-10°C - +110°C
263K - 383K
-10°C - +185°C
263K - 458K
-10°C - +185°C
263K - 458K
0.2 - 250.0 bar
2.9 - 3625.7 PSI
0.2 - 250.0 bar
2.9 - 3625.7 PSI
0.1 - 180.0 bar
1.5 - 2610.7 PSI
0.1 - 330.0 bar
1.5 - 4786.2 PSI
0.1 - 500.0 bar
1.5 - 7251.9 PSI
0.1 - 200.0 bar
1.5 - 2900.6 PSI
0.1 - 200.0 bar
1.5 - 2900.6 PSI
1.0 - 16.0 bar
14.5 - 232.0 PSI
0.8 - 1.0 bar
11.6 - 14.5 PSI
1.0 - 16.0 bar
14.5 - 232.0 PSI
0.2 - 20.0 bar
2.9 - 290.0 PSI
5.0 - 10.0 bar
72.5 - 145.0 PSI
06311
06315
06316
06317
06318
06319
06370
06372
06376
06380
06601
S/G/L
S/G/L
S/G/L
S/G/L
S/G/L
S/G/L
L
S/G
L
S/G
S/G
pressure
Approval
Page
TÜV-SV
909
ASME
✓
72/73
909
✓
74/75
980
✓
76/77
980
✓
78/79
847/878
80/81
847/878
82/83
847/878
84/85
749
28/29
749
30/31
749
32/33
749
34/35
1080
36/37
Edition 2016-01
herose.com
7
Safety and Overflow Valves
Content
Threaded Safety Valves, angle type, spring loaded
Type
Inlet
Female thread
1/2''
06603
Female thread
1/2''
06604
Female thread
1/2''
06605
Male thread
1/2''
06395
Female thread
1/2'' up to 1-1/4''
06395
Male thread
1/2'' up to 1-1/4''
06810,
Male thread
3/4''
06815
06850,
Male thread
06855
1/2'' up to 1-1/2''
50051.0004 Male thread
1/2''
50051.0011 Male thread
3/8''
06602
Medium
Temperature
Set
range
S/G
-10°C - +130°C
263K - 403K
-10°C - +180°C
263K - 453K
-50°C - +150°C
223K - 423K
-50°C - +150°C
223K - 423K
-10°C - +225°C
263K - 498K
-10°C - +225°C
263K - 498K
-270°C - +400°C
3K - 673K
-270°C - +400°C
3K - 673K
-10°C - +160°C
263K - 403K
-10°C - +160°C
263K - 403K
1.2 - 1.3 bar
17.4 - 18.8 PSI
0.2 - 5.0 bar
2.9 - 72.5 PSI
14.0 - 30.0 bar
203.0 - 435.1 PSI
14.0 - 30.0 bar
203.0 - 435.1 PSI
0.5 - 25.0 bar
7.2 - 362.6 PSI
0.5 - 25.0 bar
7.2 - 362.6 PSI
0.5 - 180.0 bar
7.2 - 2610.7 PSI
0.2 - 250.0 bar
2.9 - 3625.7 PSI
6.0 - 15.0 bar
87.0 - 217.5 PSI
1.5 - 5.0 bar
21.8 - 72.5 PSI
S/G
S/G
S/G
S/G
S/G
S/G/L
S/G/L
S/G/L
S/G
pressure
Approval
TÜV-SV
1080
Page
ASME
38/39
1080
40/41
1080
42/43
1080
44/45
910
46-49
910
50-55
1130
56-60
1130
61-66
68/69
1009
70/71
Threaded Overflow Valves, angle type, spring loaded
Type
Inlet
pressure
Medium
Temperature
Set
range
S/G
-10°C - +65°C
263K - 338
-10°C - +165°C
263K - 438K
-10°C - +185°C
263K - 458K
-10°C - +185°C
263K - 458K
-10°C - +280°C
263K - 553K
-60°C - +280°C
213K - 553K
0.7 - 2.0 bar
10.2 - 29.0 PSI
0.2 - 25.0 bar
2.9 - 362.6 PSI
0.2 - 25.0 bar
2.9 - 362.6 PSI
2.0 - 25.0 bar
29.0 - 362.6 PSI
0.1 - 200.0 bar
1.5 - 2900.6 PSI
0.1 - 250.0 bar
1.5 - 3625.7 PSI
Approval
TÜV-SV
50051.0012 Male thread
1/4''
06195
Female thread
1/2'' up to 2''
06196
Female thread
1/2'' up to 2''
06198
Female thread
1/2'' up to 2''
06321
Female thread
3/8'' up to 1-1/2''
06322
Female thread
3/8'' up to 1-1/2''
S/G/L
S/G/L
S/G
S/G/L
S/G/L
Page
ASME
98/99
100/101
102/103
104/105
106/107
108/109
Edition 2016-01
8
Phone: +49 4531 509-0
Safety and Overflow Valves
Content
Flanged Safety Valves, angle type, spring loaded
Type
Inlet
Medium
Temperature
Set
range
06120,
06121
06125,
06126
06127
DN15-DN100,
PN16
DN15-DN125,
PN40
DN15-DN100,
PN40
DN25-DN150,
PN16
DN25-DN150,
PN40
DN25-DN150,
PN40
S/G/L
-10°C - +200°C
263K - 473K
-10°C - +350°C
263K - 623K
-270°C - +450°C
3K - 723K
-10°C - +300°C
263K - 573K
-10°C - +300°C
263K - 573K
-270°C - +400°C
3K - 673K
0.2 - 16.0 bar
2.9 - 232.0 PSI
0.2 - 40.0 bar
2.9 - 580.0 PSI
0.2 - 40.0 bar
2.9 - 580.0 PSI
0.2 - 16.0 bar
2.9 - 232.0 PSI
0.2 - 40.0 bar
2.9 - 580.0 PSI
0.2 - 40.0 bar
2.9 - 580.0 PSI
06340,
06341
06345,
06346
06347
S/G/L
S/G/L
S/G/L
S/G/L
S/G/L
pressure
Approval
TÜV-SV
577
Page
ASME
86/87
577
88/89
577
90/91
576
92/93
576
✓
94/95
576
✓
96/97
Edition 2016-01
herose.com
9
DIN EN Valves for Industrial Use
Content
Globe Valves
Type
01021
Nominal size
DN8-DN50
Connections
Thread type G
Working pressure
max. PN16
03021
DN20 - DN50
Flanged
max. PN16
03050
DN25 - DN150
Flanged
max. PN16
03080
DN15 - DN150
Flanged
max. PN16
03090
DN15 - DN150
Flanged
max. PN40
Temperature
-10°C - +160°C
263K - 433K
-10°C - +160°C
263K - 433K
-10°C - +225°C
263K - 489K
-10°C - +225°C
263K - 489K
-10°C - +400°C
263K - 673K
Page
112
Temperature
-10°C - +200°C
263K - 473K
-10°C - +180°C
263K - 453K
-10°C - +200°C
263K - 473K
-25°C - +120°C
248K - 393K
-25°C - +120°C
248K - 393K
Page
117
113
114
115
116
Gate Valves
Type
09010
Nominal size
DN15 - DN50
Connections
Thread type G
Working pressure
max. PN16
09012
DN15 - DN50
Thread type G
max. PN16
09061
DN20 - DN80
Flanged
max. PN16
09420
DN25 - DN100
Flanged
max. PN16
09420
DN25 - DN100
Flanged
max. PN16
Connections
Thread type G
Working pressure
max. PN16
Temperature
-10°C - +185°C
263K - 458K
Page
122
Connections
Thread type G
Working pressure
max. PN40
Temperature
-10°C - +100°C
263K - 373K
Page
123
Connections
Thread type G
Working pressure
max. PN16
Temperature
-10°C - +165°C
263K - 438K
Page
124
118
119
120
121
Angle Valves
Type
01131
Nominal size
DN15 - DN50
Needle Valves
Type
04010
Nominal size
DN8 - DN32
Self Closing Globe Valves
Type
01028
Nominal size
DN15 - DN25
Edition 2016-01
10
Phone: +49 4531 509-0
DIN EN Valves for Industrial Use
Content
Control Valves
Type
04020
Nominal size
DN10 - DN50
Connections
Thread type G
Working pressure
max. PN16
04041
DN15 - DN50
Flanged
max. PN16
Temperature
-10°C - +160°C
263K - 433K
-10°C - +160°C
263K - 433K
Page
125
Temperature
-10°C - +160°C
263K - 433K
-10°C - +160°C
263K - 433K
-10°C - +160°C
263K - 433K
-10°C - +225°C
263K - 498K
-10°C - +400°C
263K - 673K
-10°C - +160°C
263K - 433K
-200°C - +500°C
73K - 773K
Page
127
Temperature
Page
-10°C - +75°C
263K - 348K
-10°C - +75°C
263K - 348K
-10°C - +75°C
263K - 348K
-10°C - +70°C
263K - 343K
-10°C - +90°C
263K - 368K
134
Temperature
Page
126
Check Valves
Type
05011,
05012
05083
Nominal size
DN10 - DN50
Connections
Thread type G
Working pressure
max. PN16
DN20 - DN50
Flanged
max. PN16
05082
DN20 - DN150
Flanged
max. PN16
05110
DN15 - DN150
Flanged
max. PN16
05115
DN15 - DN150
Flanged
max. PN40
05040
DN15 - DN65
Thread type G
max. PN16
05338
DN15 - DN100
max. PN40
128
129
130
131
132
133
Pressure Reducing Valves
Type
Nominal size
Connections
Thread type G
Inlet
pressure
max. 25 bar
Outlet
pressure
1,5-8,0 bar
08010
DN8 - DN50
08011
Working
pressure
DN8 - DN50
Thread type G
max. 40 bar
1,5-20,0 bar
08012
DN8 - DN50
Thread type G
max. 25 bar
0,2-2,0 bar
08015
DN8 - DN50
Thread type G
max. 40 bar
1,0-10,0 bar
08023
DN15 - DN50
Union type
connection
max. 25 bar
0,6-7,0 bar
Type
Nominal size
Connections
Inlet
pressure
Outlet
pressure
08180,
08181
08161
DN8 - DN50
Thread type G
Working
pressure
max. PN16
DN15 - DN150
Flanged
max. PN16
08170
DN15 - DN150
Flanged
max. PN40
135
136
137
138
Strainer
-10°C - +200°C
263K - 473K
-10°C - +200°C
263K - 473K
-10°C - +400°C
263K - 673K
139
140
141
Edition 2016-01
herose.com
11
Edition 2016-01
12
Phone: +49 4531 509-0
Safety and Overflow Valves for
General Industrial Use
Open discharge safety valve installed on a silo trailer application
Edition 2016-01
herose.com
13
Safety Valves
Type 06205
Safety Valves, brass,
type tested TÜV-SV.1090 S/G
Standard safety valve
with FPM valve seal, open bonnet,
with discharge holes, with lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 06205.X.0000
Available options - on request only:
· stainless steel spring - material 1.4571
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in stationary and
moveable gas cylinders and pressure vessels. Approved for air and similar gases.
Working temperature: -20°C / -4°F (253K) up to +160°C / +320°F (433K), size d0 7 suitable for horizontal installation
Materials
1 Body
2 Valve seal
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Stem guide
8 Lifting device
9 Closing cap
DIN EN
ASME/ASTM
CW614N B 249 UNS C38500
FPM (Viton)
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.1200
A 227
PTFE
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06205
Nominal size
Orifice
Dimension code
Set pressure range
Height
Length
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/4
d0
7
.X.
0200
bar
0.4-43
H
60
L2
10
S1
21
ca. kg
0.07
αw
0.60
3/8
7
0300
0.4-43
60
10
21
0.07
0.60
1/2
7
0704
0.4-43
67
12
24
0.17
0.60
1/2
12
0400
0.2-22
78
12
27
0.17
0.47
3/4
15
0600
0.2-16
92
15
32
0.27
0.63
1
18
1000
0.2-18
110
18
41
0.48
0.63
1-1/4
20
1200
0.2-16
125
20
48
0.75
0.63
Dimensions in mm.
* with FPM seal up to 35 bar, with PTFE seal up to 43 bar
Edition 2016-01
14
Phone: +49 4531 509-0
Safety Valves
Type 06205
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.4
0.6
0.8
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
27.0
30.0
32.0
34.0
36.0
38.0
40.0
42.0
43.0
1/4
7.0
38.48
3/8
7.0
38.48
1/2
7.0
38.48
19
23
28
32
50
67
85
102
120
137
155
172
190
225
260
295
330
368
404
457
492
550
585
621
657
692
734
770
788
19
23
28
32
50
67
85
102
120
137
155
172
190
225
260
295
330
368
404
457
492
550
585
621
657
692
734
770
788
19
23
28
32
50
67
85
102
120
137
155
172
190
225
260
295
330
368
404
457
492
550
585
621
657
692
734
770
788
1/2
12.0
113.1
Air
30
42
52
61
70
113
156
196
236
276
316
357
398
439
519
599
680
760
849
930
-
3/4
15.0
176.7
1
18.0
254.5
1-1/4
20.0
314.2
60
84
104
124
142
239
327
411
496
579
663
749
833
919
1087
1256
1424
-
86
121
150
178
205
345
472
592
714
834
955
1079
1200
1324
1566
1809
2051
2294
-
106
150
186
220
253
426
582
731
881
1030
1179
1332
1482
1634
1934
2233
2532
-
Edition 2016-01
herose.com
15
Safety Valves
Type 06216, Type 06217
Safety Valves, brass,
type tested TÜV-SV.1090 S/G
Standard safety valve
with FPM valve seal, open bonnet, with discharge holes
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 06216.X.0000
Part No. 06217.X.0000
with lifting device
Available options - on request only:
· discharge holes with protection cap
· stainless steel spring - material 1.4571
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in stationary and
moveable gas cylinders and pressure vessels. Approved for air and similar gases.
Working temperature: -40°C / -40°F (233K) up to +200°C / +392°F (473K), suitable for horizontal installation
Materials
1 Body
2 Valve seal
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Stem guide
8 Cap
9 Lifting device
10 Closing cap
DIN EN
ASME/ASTM
CW617N B 283 UNS C37700
FPM (Viton-GLT)
CW614N B 455 UNS C38500
CW614N B 455 UNS C38500
CW614N B 455 UNS C38500
1.1200
A 227
PTFE
CW614N B 455 UNS C38500
CW614N B 455 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Type 06216, Type 06217
Nominal size
Orifice
Dimension code
Set pressure range
Height
Height
Length
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
12
.X.
0400
bar
0.2-25
H1
103
H2
107
L2
14
S1
27
ca. kg
0.25
αw
0.83
rated
2.59
slope
3/4
15
0600
0.2-30
122
126
16
32
0.41
0.83
4.10
1
20
1000
0.2-30
149
150
18
41
0.72
0.73
6.79
1-1/4
25
1200
0.2-22
169
172
20
50
1.23
0.71
10.15
1-1/2
32
1400
0.2-16
198
200
22
55
1.73
0.69
16.50
2
40
2000
0.2-12
224
228
25
70
3.09
0.66
24.80
Dimensions in mm.
Edition 2016-01
16
Phone: +49 4531 509-0
Safety Valves
Type 06216, Type 06217
Discharge capacities
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Air in SCFM at 60°F (15.6°C) and 14.7 psia (1013.25 mbar)
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Calculation of discharge capacity acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1 resp. ASME Code Sec. VIII.
The safety valve is marked with the lower capacity of both calculations.
GW
1/2
3/4
1 1-1/4 1-1/2
2
Set
d0 (mm)
12.0 15.0 20.0 25.0 32.0
40.0
pressure
2
804.2 1256.6
in bar (g) A0 (mm ) 113.1 176.7 314.2 490.9
Medium
Air in m3 /h
0.2
46
74
121
183
299
411
0.5
81
130
205
300
503
691
1.0
124
196
307
459
775 1085
2.0
195
307
495
752 1214 1760
3.0
260
412
674 1021 1630 2436
4.0
326
518
845 1282 2046 3057
5.0
394
622 1017 1542 2461 3679
6.0
460
728 1189 1803 2877 4300
7.0
526
833 1361 2063 3293 4921
8.0
593
939 1533 2324 3709 5543
9.0
659 1044 1704 2584 4124 6164
10.0
725 1148 1876 2843 4540 6785
12.0
859 1359 2220 3364 5371 8028
14.0
992 1569 2563 3885 6203
16.0
1124 1780 2907 4406 7034
18.0
1257 1991 3251 4927
20.0
1389 2200 3594 5448
22.0
1523 2410 3938 5969
25.0
1722 2726 4453
26.0
- 2832 4625
28.0
- 3042 4969
30.0
- 3253 5312
-
GW
1/2
3/4
1 1-1/4 1-1/2
2
Set
d0 (inch) 0.472 0.591 0.787 0.984 1.260 1.575
pressure
2
in psig A0 (in ) 0.175 0.274 0.487 0.761 1.247 1.948
Medium
Air in SCFM
15
78
124
194
290
490
687
30
127
195
315
479
773 1123
50
191
285
466
710 1130 1688
60
221
330
540
822 1308 1955
70
251
375
614
933 1486 2222
80
281
421
688 1045 1665 2488
90
312
466
762 1157 1843 2755
100
341
511
835 1269 2022 3022
120
402
601
981 1492 2376 3551
130
432
646 1055 1604 2554 3818
140
462
691 1129 1716 2733 4084
150
492
736 1203 1828 2911 4351
160
522
781 1277 1940 3090 4618
174
565
845 1380 2098 3340 4992
180
583
872 1424 2164 3446
190
613
917 1498 2276 3624
200
643
962 1572 2388 3803
220
703 1052 1719 2613 4160
232
739 1106 1807 2747 4374
240
764 1142 1866 2836
260
824 1232 2014 3060
280
884 1323 2161 3284
300
945 1413 2308 3509
319
1002 1498 2448 3721
340
1065 1593 2603
363
1134 1697 2772
380
- 1774 2897
400
- 1864 3045
420
- 1954 3192
435
- 2022 3302
-
Edition 2016-01
herose.com
17
Safety Valves
Type 06216, Type 06217 with protection cap
Safety Valves, brass,
type tested TÜV-SV.1090 S/G
Standard safety valve
with FPM valve seal, open bonnet, with discharge holes
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 06216.X.0001
Part No. 06217.X.0001
with lifting device and protection cap (polycarbonate)
Available options - on request only:
· stainless steel spring - material 1.4571
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in stationary and
moveable gas cylinders and pressure vessels. Approved for air and similar gases.
Working temperature: -30°C / -22°F (243K) up to +130°C / +266°F (403K), suitable for horizontal installation
Materials
1 Body
2 Valve seal
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Stem guide
8 Cap
9 Lifting device
10 Closing cap
11 Protection cap
DIN EN
ASME/ASTM
CW617N B 283 UNS C37700
FPM (Viton-GLT)
CW614N B 455 UNS C38500
CW614N B 455 UNS C38500
CW614N B 455 UNS C38500
1.1200
A 227
PTFE
CW614N B 455 UNS C38500
CW614N B 455 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Type 06216, Type 06217
Nominal size
Orifice
Dimension code
Set pressure range
Height
Height
Length
Diameter
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
12
.X.
0400
bar
0.2-25
H1
103
H2
107
L2
14
D
41.4
S1
27
ca. kg
0.25
αw
0.83
rated
2.59
slope
3/4
15
0600
0.2-30
122
126
16
49.0
32
0.41
0.83
4.10
1
20
1000
0.2-30
149
150
18
62.5
41
0.72
0.73
6.79
1-1/4
25
1200
0.2-22
169
172
20
74.8
50
1.23
0.71
10.15
1-1/2
32
1400
0.2-16
198
200
22
86.0
55
1.73
0.69
16.50
2
40
2000
0.2-12
224
228
25
109.0
70
3.09
0.66
24.80
Dimensions in mm.
Edition 2016-01
18
Phone: +49 4531 509-0
Safety Valves
Type 06216, Type 06217 with protection cap
Discharge capacities
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Air in SCFM at 60°F (15.6°C) and 14.7 psia (1013.25 mbar)
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Calculation of discharge capacity acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1 resp. ASME Code Sec. VIII.
The safety valve is marked with the lower capacity of both calculations.
GW
1/2
3/4
1 1-1/4 1-1/2
2
Set
d0 (mm)
12.0 15.0 20.0 25.0 32.0
40.0
pressure
2
804.2 1256.6
in bar (g) A0 (mm ) 113.1 176.7 314.2 490.9
Medium
Air in m3 /h
0.2
46
74
121
183
299
411
0.5
81
130
205
300
503
691
1.0
124
196
307
459
775 1085
2.0
195
307
495
752 1214 1760
3.0
260
412
674 1021 1630 2436
4.0
326
518
845 1282 2046 3057
5.0
394
622 1017 1542 2461 3679
6.0
460
728 1189 1803 2877 4300
7.0
526
833 1361 2063 3293 4921
8.0
593
939 1533 2324 3709 5543
9.0
659 1044 1704 2584 4124 6164
10.0
725 1148 1876 2843 4540 6785
12.0
859 1359 2220 3364 5371 8028
14.0
992 1569 2563 3885 6203
16.0
1124 1780 2907 4406 7034
18.0
1257 1991 3251 4927
20.0
1389 2200 3594 5448
22.0
1523 2410 3938 5969
25.0
1722 2726 4453
26.0
- 2832 4625
28.0
- 3042 4969
30.0
- 3253 5312
-
GW
1/2
3/4
1 1-1/4 1-1/2
2
Set
d0 (inch) 0.472 0.591 0.787 0.984 1.260 1.575
pressure
2
in psig A0 (in ) 0.175 0.274 0.487 0.761 1.247 1.948
Medium
Air in SCFM
15
78
124
194
290
490
687
30
127
195
315
479
773 1123
50
191
285
466
710 1130 1688
60
221
330
540
822 1308 1955
70
251
375
614
933 1486 2222
80
281
421
688 1045 1665 2488
90
312
466
762 1157 1843 2755
100
341
511
835 1269 2022 3022
120
402
601
981 1492 2376 3551
130
432
646 1055 1604 2554 3818
140
462
691 1129 1716 2733 4084
150
492
736 1203 1828 2911 4351
160
522
781 1277 1940 3090 4618
174
565
845 1380 2098 3340 4992
180
583
872 1424 2164 3446
190
613
917 1498 2276 3624
200
643
962 1572 2388 3803
220
703 1052 1719 2613 4160
232
739 1106 1807 2747 4374
240
764 1142 1866 2836
260
824 1232 2014 3060
280
884 1323 2161 3284
300
945 1413 2308 3509
319
1002 1498 2448 3721
340
1065 1593 2603
363
1134 1697 2772
380
- 1774 2897
400
- 1864 3045
420
- 1954 3192
435
- 2022 3302
-
Edition 2016-01
herose.com
19
Safety Valves
Typ 55177 - Protection cap
for Safety valves type 06216, 06217
Valve protection cap made ​of polycarbonate (PC)
Valveoutlet completely surrounded - for environmental
and personal protection against sudden blowing off
Conformable for the types 06216, 06217 (with discharge hole)
Temperature: -30°C/ -22°F (243K) bis +130°C/ +266°F (403K)
Part-No. 55177.0087.0874G
for nominal size 1/2"
Part-No. 55177.0088.0874G
for nominal size 3/4"
Part-No. 55177.0089.0874G
for nominal size 1"
Part-No. 55177.0090.0874G
for nominal size 1-1/4"
Part-No. 55177.0091.0874G
for nominal size 1-1/2"
Part-No. 55177.0092.0874G
for nominal size 2"
Edition 2016-01
20
Phone: +49 4531 509-0
Edition 2016-01
herose.com
21
Safety Valves
Type 06218, Type 06219
Safety Valves, brass,
type tested TÜV-SV.1090. S/G
Full lift safety valve
with PTFE O-Ring valve seal,
open bonnet, with discharge holes
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 06218.X.0000
Part No. 06219.X.0000
with lifting device
Available options - on request only:
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in stationary
and moveable gas cylinders and pressure vessels. Approved for air and similar gases.
Working temperature: -60°C / -76°F (213K) up to +150°C / +302°F (423K), suitable for horizontal installation
Materials
1 Body
2 Valve seal
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Stem guide
8 Cap
9 Lifting device
10 Closing cap
DIN EN
ASME/ASTM
CW617N EN 12165
PTFE O-Ring
CW614N EN 12164
CW614N EN 12164
CW614N EN 12164
1.4571
A 313 Grade 316Ti
PTFE
CW614N EN 12164
CW614N EN 12164
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06218 & 06219
Nominal size
Orifice
Dimension code
Set pressure range
Height
Height
Length
Wrench size across flats
Weight
Coeff. of discharge
Technical data
3/4
GW
1/2
d0
12.5
12.5
.X.
0400
0600
bar
3.0-16.0 3.5-17.0
H1
102
121.5
H2
106
126
L2
14
16
S1
27
32
ca. kg
0.25
0.40
αw
0.26
0.75
Dimensions in mm.
Edition 2016-01
22
Phone: +49 4531 509-0
Safety Valves
Type 06218, Type 06219
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
0.5
1.0
2.0
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
GW
d0 (mm)
A0 (mm2 )
Medium
1/2
12.5
122.7
Air
90
102
113
136
159
182
206
229
252
275
298
321
344
367
390
-
3/4
12.5
122.7
305
340
410
479
548
619
689
760
829
899
969
10389
1108
1177
1247
-
Edition 2016-01
herose.com
23
Safety Valves
Type 06505
Safety Valves, brass,
type tested TÜV-SV.948 Liquid/ Granular/ Powder
Standard safety valve
with FPM valve seal, closed bonnet,
with diaphragm for protection of the spring, with lifting device,
discharge holes with protection cap
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 06505.X.1000
Available options - on request only:
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in vehicle containers and
pressure vessels. Approved for liquid, granular and powdery goods.
Working temperature: -40°C / -40°F (233K) up to +200°C / +392°F (473K)
Materials
1 Body
2 Valve seal
3 Disc
4 Protection cap
5 Diaphragm
6 Stem
7 Bonnet
8 Spring
9 Stem guide
10 Lifting device
11 Closing cap
DIN EN
ASME/ASTM
CW614N B 249 UNS C38500
FPM (Viton-GLT)
CW614N B 249 UNS C38500
1.4301
A 240 Grade 304
Silicon
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
PTFE
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06505
Nominal size
Orifice
Dimension code
Set pressure range
Height
Length
Protection cap diameter
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Coeff. of discharge from 3.5 bar
Coeff. of discharge from 4.5 bar
Technical data
GW
1
d0
24
.X.
1000
bar
0.5-6.0
H
194
L2
18
D
80
S1
55
ca. kg
1.75
αw
0.62
αw
αw
0.57
1-1/4
28
2812
0.5-4.5
198
22
80
55
1.85
0.58
-
1-1/2
28
2814
0.5-4.5
198
22
80
55
1.90
0.58
-
1-1/4
31
3112
0.5-6.0
191
22
80
55
2.00
0.68
0.65
-
1-1/2
31
3114
0.5-6.0
191
22
80
55
2.30
0.68
0.65
-
2
48
2000
0.5-3.5
232
25
115
85
4.5
0.52
-
Dimensions in mm.
Edition 2016-01
24
Phone: +49 4531 509-0
Safety Valves
Type 06505
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.5
0.6
0.7
0.8
0.9
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.5
3.6
3.8
4.0
4.2
4.4
4.5
4.6
4.8
5.0
5.2
5.4
5.6
5.8
6.0
1
24.0
452.4
1-1/4
28.0
615.8
237
268
299
329
353
372
414
456
504
553
604
648
694
740
782
825
868
910
931
952
994
1036
1078
1120
1049
1069
1107
1148
1187
1226
1265
1304
1343
297
326
354
392
422
449
508
578
639
703
768
825
883
942
995
1051
1105
1158
1185
1212
1266
1319
1373
1427
1453
-
1-1/2
1-1/4
28.0
31.0
615.8
754.8
Air
297
435
326
482
354
535
392
579
422
631
449
673
508
759
578
848
639
941
703
1031
768
1123
825
1200
883
1277
942
1354
995
1431
1051
1511
1105
1588
1158
1665
1185
1628
1212
1665
1266
1739
1319
1812
1373
1886
1427
1960
1453
1997
2034
2107
2185
2259
2333
2407
2481
2555
1-1/2
31.0
754.8
2
48.0
1810.0
435
482
535
579
631
673
759
848
941
1031
1123
1200
1277
1354
1431
1511
1588
1665
1628
1665
1739
1812
1886
1960
1997
2034
2107
2185
2259
2333
2407
2481
2555
835
949
1063
1153
1240
1250
1390
1531
1675
1863
2059
2243
2431
2546
2657
2770
3024
3170
3244
-
Edition 2016-01
herose.com
25
Safety Valves
Type 06506
Safety Valves, stainless steel,
type tested TÜV-SV.948. Liquid/ Granular/ Powder
Standard safety valve
with FPM valve seal, closed bonnet,
with diaphragm for protection of the spring, with lifting device,
discharge holes with protection cap
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 06506.X.1000
Applications:
Provided as safety device for protection against excessive pressure in vehicle containers and
pressure vessels. Approved for liquid, granular and powdery goods.
Working temperature: -40°C / -40°F (233K) up to +200°C / +392°F (473K)
Materials
1 Body
2 Valve seal
3 Disc
4 Protection cap
5 Diaphragm
6 Stem
7 Bonnet
8 Spring
9 Stem guide
10 Lifting device
11 Closing cap
DIN EN
ASME/ASTM
1.4408
A 351 CF8M
FPM (Viton-GLT)
1.4401
A 479 Grade 316
1.4301
A 479 Grade 304
Silicon
1.4401
A 479 Grade 316
1.4401
A 479 Grade 316
1.4571
A 313 Grade 316Ti
PTFE
1.4401
A 479 Grade 316
1.4401
A 479 Grade 316
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06506
Nominal size
Orifice
Dimension code
Set pressure range
Height
Length
Protection cap diameter
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Coeff. of discharge from 3.5 bar
Coeff. of discharge from 4.5 bar
Technical data (GW 2 in preparation)
GW
1
1-1/4
1-1/2
d0
24
31
31
3112
3114
.X.
1000
bar
0.5-6.0 0.5-6.0 0.5-6.0
H
194
191
191
L2
18
22
22
D
80
80
80
S1
55
55
55
ca. kg
1.75
2.00
2.30
αw
0.62
0.68
0.68
αw
0.65
0.65
αw
0.57
-
2
-
Dimensions in mm.
Edition 2016-01
26
Phone: +49 4531 509-0
Safety Valves
Type 06506
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.5
0.6
0.7
0.8
0.9
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.5
3.6
3.8
4.0
4.2
4.4
4.5
4.6
4.8
5.0
5.2
5.4
5.6
5.8
6.0
1
24.0
452.4
237
268
299
329
353
372
414
456
504
553
604
648
694
740
782
825
868
910
931
952
994
1036
1078
1120
1049
1069
1107
1148
1187
1226
1265
1304
1343
1-1/4
1-1/2
31.0
31.0
754.8
754.8
Air
435
435
486
486
535
535
579
579
631
631
669
669
753
753
840
840
941
941
1031
1031
1123
1123
1200
1200
1277
1277
1354
1354
1431
1431
1511
1511
1588
1588
1665
1665
1628
1628
1665
1665
1739
1739
1812
1812
1886
1886
1960
1960
1997
1997
2034
2034
2107
2107
2185
2185
2259
2259
2333
2333
2407
2407
2481
2481
2555
2555
2
-
Edition 2016-01
herose.com
27
Safety Valves
Type 06370
Safety Valves, angle type, bronze, type tested TÜV-SV.749. L
Standard safety valve
with soft valve seal for fluids, open bonnet,
with diaphragm for protection of the spring, with lifting device
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06370.X.0000 with NBR valve seal
Part No. 06370.X.0700 with FPM valve seal
Pressure range in bar:
Nom. size 1/2'':
Nom. size 1'':
Nom. size 1-1/2":
NBR
1.0 - 11.0
1.0 - 10.0
1.0 - 8.5
FPM
1.0 - 16.0
1.0 - 16.0
1.0 - 16.0
Nom. size 3/4'':
Nom. size 1-1/4'':
Nom. size 2":
NBR
1.0 - 10.5
1.0 - 9.0
1.0 - 9.0
FPM
1.0 - 16.0
1.0 - 16.0
1.0 - 16.0
Available options - on request only:
· stainless steel spring - material 1.4571
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels.
Approved for non-adhesive fluids, which are not vaporized during blow off.
Working temperature: -10°C / +14°F (263K) up to +110°C / +230°F (383K), suitable for horizontal installation
Materials
1 Body
2 Disc nut
3 Plate
4 Valve seal
5 Disc
6 Diaphragm
7 Stem
8 Bonnet
9 Spring
10 Lifting device
11 Closing cap
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
NBR or FPM
CW614N B 249 UNS C38500
NBR
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.1200
A 227
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06370
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Weight
Coeff. of discharge
Technical data
GW
1/2
d0
12
.X.
0400
bar
1.0-16
GA
1/2
H
92
L1
25
L2
20
S1
27
ca. kg
0.24
αw
0.20
3/4
15
0600
1.0-16
3/4
111
30
25
32
0.40
0.25
1
18
1000
1.0-16
1
132
36
30
41
0.70
0.31
1-1/4
20
1200
1.0-16
1-1/4
152
40
35
50
1.07
0.39
1-1/2
24
1400
1.0-16
1-1/2
175
48
40
58
1.65
0.42
2
28
2000
1.0-16
2
200
56
48
70
2.65
0.38
Dimensions in mm.
Edition 2016-01
28
Phone: +49 4531 509-0
Safety Valves
Type 06370
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
1/2
12.0
113.1
3/4
15.0
176.7
1207
1708
2092
2415
2700
2958
3195
3416
3623
3819
4184
4519
4831
2359
3336
4086
4718
5275
5778
6241
6672
7077
7460
8172
8826
9436
1
1-1/4
18.0
20.0
254.5
314.2
Water
4212
6542
5957
9252
7296 11332
8424 13085
9419 14629
10318 16025
11145 17310
11914 18505
12637 19627
13320 20689
14592 22664
15761 24480
16849 26170
1-1/2
24.0
452.4
2
28.0
615.8
10146
14348
17573
20292
22687
24852
26843
28697
30438
32084
35146
37962
40584
12494
17670
21641
24989
27938
30605
33057
35340
37483
39511
43282
46750
49978
Edition 2016-01
herose.com
29
Safety Valves
Type 06372
Safety Valves, angle type, bronze, type tested TÜV-SV.749. S/G
Standard safety valve
with soft valve seal for saturated steam, air and similar gases, open bonnet,
with diaphragm for protection of the spring, with lifting device
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06372.X.0000
with FPM valve seal (PTFE coated)
Applications:
Provided as safety device for protection against excessive pressure in pressure vessels and steam boilers.
Working temperature: -10°C / +14°F (263K) up to +120°C / +230°F (393K), suitable for horizontal installation
Materials
1 Body
2 Disc nut
3 Plate
4 Valve seal
5 Disc
6 Diaphragm
7 Stem
8 Bonnet
9 Spring
10 Lifting device
11 Closing cap
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
FPM (PTFE coated)
CW614N B 249 UNS C38500
NBR
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06370
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Weight
Coeff. of discharge
Technical data
GW
3/4
d0
15
.X.
0600
bar
0.8-1.0
GA
3/4
H
111
L1
30
L2
25
S1
32
ca. kg
0.40
αw
0.27
Dimensions in mm.
Edition 2016-01
30
Phone: +49 4531 509-0
Safety Valves
Type 06372
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated Steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
0.8
0.9
1.0
GW
d0 (mm)
A0 (mm2 )
Medium
3/4
15.0
176.7
A
B
49
52
54
62
65
68
Edition 2016-01
herose.com
31
Safety Valves
Type 06376
Safety Valves, angle type, bronze, type tested TÜV-SV.749. L
Standard safety valve
with soft valve seal for fluids, open bonnet,
with diaphragm for protection of the spring, with lifting device
In- and Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06376.X.0000
with NBR valve seal for following pressure range
Nom. size 1/2'':
1.0 - 11.50 bar,
Nom. size 3/4'':
Nom. size 1'':
1.0 - 9.00 bar,
Nom. size 1-1/4'':
1.0 - 12.50 bar
1.0 - 10.50 bar
with FPM valve seal for following pressure range
Nom. size 1/2'':
1.0 - 16.0 bar,
Nom. size 3/4'':
Nom. size 1'':
1.0 - 16.0 bar,
Nom. size 1-1/4'':
1.0 - 16.0 bar
1.0 - 16.0 bar
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels.
Approved for non-toxic, non-inflammable fluids - medium contact parts are seawater resistant.
Working temperature: -10°C / +14°F (263K) up to +110°C / +230°F (383K), suitable for horizontal installation
Materials
1 Body
2 Disc nut
3 Plate
4 Valve seal
5 Disc
6 Diaphragm
7 Stem
8 Bonnet
9 Spring
10 Lifting device
11 Closing cap
DIN EN
ASME/ASTM
CC480K C90700
1.4571/A4 similar A 194
Copper
NBR or FPM
CW452K B 159 UNS C51900
NBR
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06376
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Weight
Coefficient of discharge
Technical data
GW
1/2
d0
12
.X.
0400
bar
1.0-16
GA
1/2
H
92
L1
25
L2
20
S1
27
ca. kg
0.24
αw
0.20
3/4
15
0600
1.0-16
3/4
111
30
25
32
0.40
0.25
1
18
1000
1.0-16
1
132
36
30
41
0.70
0.31
1-1/4
20
1200
1.0-16
1-1/4
152
40
35
50
1.07
0.39
Dimensions in mm.
Edition 2016-01
32
Phone: +49 4531 509-0
Safety Valves
Type 06376
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
1/2
12.0
113.1
1207
1706
2090
2413
2698
2956
3193
3413
3620
3816
4180
4515
4827
3/4
1
15.0
18.0
176.7
254.5
Water
2357
4213
3333
5958
4082
7297
4713
8426
5270
9420
5773 10320
6235
11146
6666 11916
7070 12639
7453 13322
8164 14594
8818 15763
9427 16852
1-1/4
20.0
314.2
6543
9254
11334
13087
14632
16028
17312
18508
19630
20692
22667
24483
26174
Edition 2016-01
herose.com
33
Safety Valves
Type 06380
Safety Valves, angle type, bronze, type tested TÜV-SV.749. S/G
Standard safety valve
with soft valve seal, open bonnet, with lifting device
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06380.X.0000
with FPM valve seal for air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06380.X.0300
with PTFE valve seal for air and similar gases
and saturated steam from 2.0 up to 10.0 bar.
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06380.X.0600
with EPDM valve seal for air and similar gases
and steam from 0.2 up to 8 bar. (saturated steam only to 3 bar)
Working temperature: -10°C / +14°F (263K) up to +135°C / +275°F (408K)
Available options - on request only:
· stainless steel spring - material 1.4571, external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels.
Materials
1 Body
2 Valve seal
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Lifting device
8 Closing cap
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
FPM. PTFE or EPDM
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.1200
A 227
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06380
Nominal size
Orifice
Dimension code
Set pressure range FPM seal
Set pressure range PTFE seal
Set pressure range EPDM seal
Outlet
Height
Length
Length
Wrench size aacross flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
12
.X.
0400
bar
0.2-20
bar
0.2-20
bar
0.2-8
GA
1/2
H
99
L1
25
L2
22
S1
27
ca. kg
0.24
αw
0.47
3/4
15
0600
0.2-20
0.5-20
0.2-8
3/4
111
30
25
32
0.40
0.37
1
18
1000
0.2-20
0.2-20
0.2-9
1
132
36
30
41
0.70
0.52
1-1/4
20
1200
0.2-20
0.4-20
0.2-9
1-1/4
152
40
35
50
1.07
0.57
1-1/2
24
1400
0.2-16
0.2-16
0.2-8
1-1/2
175
48
40
58
1.65
0.52
2
28
2000
0.2-16
1.0-16
0.2-8
2
200
56
48
70
2.65
0.50
Dimensions in mm.
Edition 2016-01
34
Phone: +49 4531 509-0
Safety Valves
Type 06380
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.4
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
1/2
12.0
113.1
3/4
15.0
176.7
28
40
46
68
113
156
196
236
276
316
357
398
439
519
599
680
760
849
38
54
61
89
140
192
241
291
340
389
440
489
540
638
737
836
935
1044
1
18.0
254.5
Air
69
101
114
172
284
389
488
589
689
788
891
990
1093
1293
1493
1693
1893
2113
1-1/4
20.0
314.2
1-1/2
24.0
452.4
2
28.0
615.8
1/2
12.0
113.1
96
137
154
230
391
527
661
797
932
1067
1205
1340
1479
1750
2020
2291
2562
2860
123
179
204
306
505
692
869
1048
1225
1402
1584
1761
1943
2298
2654
3010
-
159
236
271
407
660
906
1137
1371
1603
1835
2073
2305
2543
3008
3474
3940
-
24
34
38
54
89
122
152
182
212
242
271
301
331
-
3/4
15.0
176.7
1
1-1/4
18.0
20.0
254.5
314.2
Saturated steam
33
59
82
45
84
115
50
94
128
71
137
184
110
224
309
150
304
411
187
379
513
224
454
615
261
528
715
297
603
816
334
677
916
371
750
1016
407
824
1115
-
1-1/2
24.0
452.2
2
28.0
615.8
105
150
168
244
398
541
674
808
940
1072
1203
1334
1465
-
136
198
224
326
521
708
883
1057
1230
1403
1575
1747
1918
-
Edition 2016-01
herose.com
35
Safety Valves
Type 06601
Safety Valves, angle type, bronze, type tested TÜV-SV.1080. S/G
Standard safety valve
with O-ring valve seal,
closed bonnet, with lifting device
with enlarged outlet
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06601.1204.0000
Available options - on request only:
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels.
Approved for non-toxic gases and vapours.
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Materials
1 Body
2 Inlet body
3 O-ring
4 Disc
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
CC491K
CW614N
PTFE
CW614N
CW614N
CW614N
1.4571
CW614N
CW507L
ASME/ASTM
B 62 UNS C83600
B 111 UNS C28000
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06601
Nominal size
Orifice
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coefficient of discharge
Technical data
GW
1/2
d0
12.5
bar
5.0-10
GA
1
H
117
L1
36
L2
42
S1
32
S2
41
ca. kg
0.65
αw
0.42
Dimensions in mm.
Edition 2016-01
36
Phone: +49 4531 509-0
Safety Valves
Type 06601
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
GW
d0 (mm)
A0 (mm2 )
Medium
1/2
12.5
122.7
Air
229
249
268
287
307
326
347
366
385
405
425
Edition 2016-01
herose.com
37
Safety Valves
Type 06602
Safety Valves, angle type, bronze, type tested TÜV-SV.1080. S/G
Standard safety valve
with O-ring valve seal,
closed bonnet, with lifting device,
with enlarged outlet
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06602.1204.0000
Available options - on request only:
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in pressure vessels
and steam boilers. Approved for non-toxic gases, vapours and for saturated steam.
Working temperature: -10°C / +14°F (263K) up to +130°C / +266°F (403K)
Materials
1 Body
2 Inlet body
3 O-ring
4 Disc
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
CC491K
CW614N
EPDM
CW614N
CW614N
CW614N
1.4571
CW614N
CW507L
ASME/ASTM
B 62 UNS C83600
B 111 UNS C28000
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06602
Nominal size
Orifice
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coefficient of discharge
Technical data
GW
1/2
d0
12.5
bar
1.2-1.3
GA
1
H
117
L1
36
L2
42
S1
32
S2
41
ca. kg
0.65
αw
0.82
Dimensions in mm.
Edition 2016-01
38
Phone: +49 4531 509-0
Safety Valves
Type 06602
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
1.2
1.3
GW
d0 (mm)
A0 (mm2 )
Medium
1/2
12.5
122.7
Air
159
167
1/2
12.5
122.7
Saturated steam
127
133
Edition 2016-01
herose.com
39
Safety Valves
Type 06603
Safety Valves, angle type, bronze, type tested TÜV-SV.1080. S/G
Standard safety valve
with O-ring valve seal,
closed bonnet, with lifting device,
with enlarged outlet
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06603.1204.0000
Available options - on request only:
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in pressure vessels
and steam boilers. Approved for non-toxic gases, vapours and for saturated steam.
Working temperature: -10°C / +14°F (263K) up to +180°C / +356°F (453K)
For saturated steam use only up to 3 bar and +135°C / +275°F (408K)
Materials
1 Body
2 Inlet body
3 O-ring
4 Disc
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
CC491K
CW614N
EPDM
CW614N
CW614N
CW614N
1.4571
CW614N
CW507L
ASME/ASTM
B 62 UNS C83600
B 111 UNS C28000
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06603
Nominal size
Orifice
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
12.5
bar
0.2-5
GA
1
H
145
L1
36
L2
42
S1
32
S2
41
ca. kg
0.7
αw
0.74
Dimensions in mm.
Edition 2016-01
40
Phone: +49 4531 509-0
Safety Valves
Type 06603
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
0.2
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
GW
d0 (mm)
A0 (mm2 )
Medium
1/2
12.5
122.7
Air
50
79
120
160
196
231
267
301
335
369
404
1/2
12.5
122.7
Saturated steam
43
66
96
128
154
182
208
235
260
287
311
Edition 2016-01
herose.com
41
Safety Valves
Type 06604
Safety Valves, angle type, bronze, type tested TÜV-SV.1080. S/G
Standard safety valve
with O-ring valve seal,
closed bonnet, with lifting device,
with enlarged outlet
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06604.1204.0000
Available options - on request only:
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels.
Approved for gases and vapours, preferably for non-inflammable refrigerants acc. to EN 378-1.
Working temperature: -50°C / -58°F (223K) up to +150°C / +316°F (423K)
Materials
1 Body
2 Inlet body
3 O-ring
4 Disc
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
CC491K
CW614N
PTFE
CW614N
CW614N
CW614N
1.4571
CW614N
CW507L
ASME/ASTM
B 62 UNS C83600
B 111 UNS C28000
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06604
Nominal size
Orifice
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coefficient of discharge
Technical data
GW
1/2
d0
12.5
bar
14.0-30
GA
1
H
145
L1
36
L2
42
S1
32
S2
41
ca. kg
0.7
αw
0.7
Dimensions in mm.
Edition 2016-01
42
Phone: +49 4531 509-0
Safety Valves
Type 06604
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
GW
d0 (mm)
A0 (mm2 )
Medium
1/2
12.5
122.7
Air
969
1034
1099
1164
1229
1294
1372
1437
1503
1569
1634
1700
1765
1831
1897
1962
2047
Edition 2016-01
herose.com
43
Safety Valves
Type 06605
Safety Valves, angle type, bronze, type tested TÜV-SV.1080. S/G
Standard safety valve
with O-ring valve seal,
closed bonnet, with lifting device,
with enlarged outlet
Inlet: male thread NPT acc. to ANSI B 1.20.1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06605.1204.0000
Available options - on request only:
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels.
Approved for gases and vapours, preferably for non-inflammable refrigerants acc. to EN 378-1.
Working temperature: -50°C / -58°F (223K) up to +150°C / +316°F (423K)
Materials
1 Body
2 Inlet body
3 O-ring
4 Disc
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
CC491K
CW614N
PTFE
CW614N
CW614N
CW614N
1.4571
CW614N
CW507L
ASME/ASTM
B 62 UNS C83600
B 111 UNS C28000
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06605
Nominal size
Orifice
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coefficient of discharge
Technical data
GW
1/2
d0
12.5
bar
14.0-30
GA
1
H
151
L1
36
L2
48
S1
32
S2
41
ca. kg
0.7
αw
0.7
Dimensions in mm.
Edition 2016-01
44
Phone: +49 4531 509-0
Safety Valves
Type 06605
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
GW
d0 (mm)
A0 (mm2 )
Medium
1/2
12.5
122.7
Air
969
1034
1099
1164
1229
1294
1372
1437
1503
1569
1634
1700
1765
1831
1897
1962
2047
Edition 2016-01
herose.com
45
Safety Valves
Type 06395
Safety Valves, angle type, bronze, type tested TÜV-SV.910. S/G
Standard safety valve
open bonnet, with lifting device and enlarged outlet
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06395.X.0000
metal to metal seated for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Part No. 06395.X.0500
with PTFE/carbon filled valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06395.X.0600
with EPDM valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +135°C / +275°F (408K)
Available options - on request only:
· stainless steel inlet body - material 1.4571
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels and steam boilers.
Materials
1 Body
2 Inlet body
3 Valve seal
4 Disc metal seated
4a Disc soft seated
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
CW614N B 111 UNS C28000
PTFE/Carbon filled or EPDM
1.4541
A 276 Grade 321
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06395
Nominal size
Orifice
Dimension code
Set pressure range metal seated
Set pressure range PTFE seal
Set pressure range EPDM seal
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
15
.X.
0400
bar
0.5-25
bar
0.5-25
bar
0.5-3
GA
1
H
144
L1
36
L2
41
S1
32
S2
41
ca. kg
0.75
αw
0.64
3/4
18
0600
0.5-25
0.5-25
0.5-3
1-1/4
166
50
48
41
50
1.25
0.58
1
23
1000
0.5-25
0.5-25
0.5-3
1-1/2
195
48
58
50
58
1.85
0.57
1-1/4
28
1200
0.5-12
0.5-12
0.5-3
2
222
58
68
55
70
3.0
0.66
Dimensions in mm.
Edition 2016-01
46
Phone: +49 4531 509-0
Safety Valves
Type 06395
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
25.0
1/2
15.0
176.7
92
142
235
333
417
503
589
674
761
846
934
1105
1276
1447
1618
1806
1979
2152
2238
3/4
1
18.0
23.0
254.5
415.5
Air
130
204
197
317
317
509
434
697
545
875
657
1055
768
1233
879
1411
993
1594
1105
1773
1219
1956
1442
2314
1665
2672
1888
3030
2112
3389
2357
3783
2583
4144
2802
4506
2921
4687
1-1/4
28.0
615.5
1/2
15.0
176.7
335
522
862
1196
1501
1810
2116
2422
2736
3043
3356
3971
-
76
113
186
260
324
388
452
515
578
641
704
830
955
1081
1206
1331
1456
1583
1643
3/4
1
18.0
23.0
254.5
415.5
Saturated steam
108
169
158
253
250
402
339
544
423
679
507
813
590
946
672
1079
755
1211
837
1343
919
1475
1083
1738
1247
2001
1411
2264
1573
2525
1737
2788
1900
3050
2065
3314
2145
3442
1-1/4
28.0
615.5
279
415
675
927
1155
1383
1613
1844
2065
2291
2517
2972
-
Edition 2016-01
herose.com
47
Safety Valves
Type 06395
Safety Valves, angle type, bronze, type tested TÜV-SV.910. S/G
Standard safety valve
open bonnet, with lifting device and enlarged outlet
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06395.X.0080
metal to metal seated for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Part No. 06395.X.0580
with PTFE/carbon filled valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06395.X.0680
with EPDM valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Available options - on request only:
· stainless steel inlet body - material 1.4571
· external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels and steam boilers.
Materials
1 Body
2 Inlet body
3 Valve seal
4 Disc metal seated
4a Disc soft seated
5 Stem
6 Bonnet
7 Spring
8 Lifting cap
9 Lifting spring
10 Lifting stem
11 Lever
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
CW614N B 111 UNS C28000
PTFE/Carbon filled or EPDM
1.4541
A 276 Grade 321
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
1.4408
A 351 CF8M
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06395
Nominal size
Orifice
Dimension code
Set pressure range metal seated
Set pressure range PTFE seal
Set pressure range EPDM seal
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
15
.X.
0400
bar
0.5-25
bar
0.5-25
bar
0.5-3
GA
1
H
180
L1
36
L2
41
S1
32
S2
41
ca. kg
0.95
αw
0.64
3/4
18
0600
0.5-25
0.5-25
0.5-7
1-1/4
200
50
48
41
50
1.45
0.58
1
23
1000
0.5-25
0.5-25
0.5-4.6
1-1/2
245
48
58
50
58
2.4
0.57
1-1/4
28
1200
0.5-12
0.5-12
0.5-6
2
270
58
68
55
70
3.7
0.66
Dimensions in mm.
Edition 2016-01
48
Phone: +49 4531 509-0
Safety Valves
Type 06395
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
25.0
1/2
15.0
176.7
92
142
235
333
417
503
589
674
761
846
934
1105
1276
1447
1618
1806
1979
2152
2238
3/4
1
18.0
23.0
254.5
415.5
Air
130
204
197
317
316
509
432
697
543
875
653
1055
764
1233
875
1411
985
1594
1096
1773
1206
1956
1427
2314
1649
2672
1870
3030
2091
3389
2312
3783
2533
4144
2754
4506
2865
4687
1-1/4
28.0
615.5
1/2
15.0
176.7
335
522
862
1196
1501
1810
2116
2422
2736
3043
3356
3971
-
76
113
186
260
324
388
452
515
578
641
704
830
955
1081
1206
1331
1456
1583
1643
3/4
1
18.0
23.0
254.5
415.5
Saturated steam
108
169
158
253
250
402
339
544
423
679
507
813
590
946
672
1079
755
1211
837
1343
919
1475
1083
1738
1247
2001
1411
2264
1573
2525
1737
2788
1900
3050
2065
3314
2145
3442
1-1/4
28.0
615.5
277
418
681
934
1165
1396
1624
1852
2079
2306
2532
2984
-
Edition 2016-01
herose.com
49
Safety Valves
Type 06395
Safety Valves, angle type, bronze, type tested TÜV-SV.910. S/G
Standard safety valve, open bonnet, with lifting device and enlarged outlet
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06395.X.2000 (Inlet: male thread type G (BSPP ) acc. to ISO 228/1)
metal to metal seated for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Part No. 06395.X.2500 (Inlet: male thread type G (BSPP ) acc. to ISO 228/1)
with PTFE/carbon filled valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06395.X.2600 (Inlet: male thread type G (BSPP ) acc. to ISO 228/1)
with EPDM valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Available options - on request only:
external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels and steam boilers.
Materials
1 Body
2 Inlet body
3 Valve seal
4 Disc metal seated
4a Disc soft seated
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
1.4301
A 276 Grade 304
PTFE/Carbon filled or EPDM
1.4541
A 276 Grade 321
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06395
Nominal size
Orifice
Dimension code
Set pressure range metal seated
Set pressure range PTFE seal
Set pressure range EPDM seal
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
15
.X.
0400
bar
0.5-25
bar
0.5-25
bar
0.5-3
GA
1
H
151
L1
36
L2
48
S1
32
S2
41
ca. kg
0.755
αw
0.64
3/4
18
0600
0.5-25
0.5-25
0.5-7
1-1/4
177
50
59
41
50
1.3
0.58
1
23
1000
0.5-25
0.5-25
0.5-4.6
1-1/2
206
48
69
50
58
1.95
0.57
1-1/4
28
1200
0.5-12
0.5-12
0.5-6
2
236
58
82
55
70
3.15
0.66
Dimensions in mm.
Edition 2016-01
50
Phone: +49 4531 509-0
Safety Valves
Type 06395
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
25.0
1/2
15.0
176.7
92
142
235
333
417
503
589
674
761
846
934
1105
1276
1447
1618
1806
1979
2152
2238
3/4
1
18.0
23.0
254.5
415.5
Air
130
204
197
317
317
509
434
697
545
875
657
1055
768
1233
879
1411
993
1594
1105
1773
1219
1956
1442
2314
1665
2672
1888
3030
2112
3389
2357
3783
2583
4144
2808
4506
2921
4687
1-1/4
28.0
615.5
1/2
15.0
176.7
335
522
862
1196
1501
1810
2116
2422
2736
3043
3356
3971
-
76
113
186
260
324
388
452
515
578
641
704
830
955
1081
1206
1331
1456
1583
1643
3/4
1
18.0
23.0
254.5
415.5
Saturated steam
108
170
158
251
250
398
339
540
423
673
507
806
590
940
672
1074
755
1203
837
1335
919
1466
1083
1732
1247
1994
1411
2256
1573
2517
1737
2779
1900
3042
2065
3301
2145
3432
1-1/4
28.0
615.5
277
418
681
934
1165
1396
1624
1852
2079
2306
2532
2984
-
Edition 2016-01
herose.com
51
Safety Valves
Type 06395
Safety Valves, angle type, bronze, type tested TÜV-SV.910. S/G
Standard safety valve, open bonnet, with lifting device and enlarged outlet
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06395.X.3000 (Inlet: male thread type R (BSPT) acc. to ISO 7/1)
metal to metal seated for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Part No. 06395.X.3500 (Inlet: male thread type R (BSPT) acc. to ISO 7/1)
with PTFE/carbon filled valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06395.X.3600 (Inlet: male thread type R (BSPT) acc. to ISO 7/1)
with EPDM valve seal for saturated steam, air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Available options - on request only:
external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels and steam boilers.
Materials
1 Body
2 Inlet body
3 Valve seal
4 Disc metal seated
4a Disc soft seated
5 Stem
6 Bonnet
7 Spring
8 Lifting device
9 Closing cap
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
CW614N B 111 UNS C28000
PTFE/Carbon filled or EPDM
1.4541
A 276 Grade 321
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06395
Nominal size
Orifice
Dimension code
Set pressure range metal seated
Set pressure range PTFE seal
Set pressure range EPDM seal
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
15
.X.
0400
bar
0.5-25
bar
0.5-25
bar
0.5-3
GA
1
H
151
L1
36
L2
48
S1
32
S2
41
ca. kg
0.755
αw
0.64
3/4
18
0600
0.5-25
0.5-25
0.5-7
1-1/4
177
50
59
41
50
1.3
0.58
1
23
1000
0.5-25
0.5-25
0.5-4.6
1-1/2
206
48
69
50
58
1.95
0.57
1-1/4
28
1200
0.5-12
0.5-12
0.5-6
2
236
58
82
55
70
3.15
0.66
Dimensions in mm.
Edition 2016-01
52
Phone: +49 4531 509-0
Safety Valves
Type 06395
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
25.0
1/2
15.0
176.7
92
142
235
333
417
503
589
674
761
846
934
1105
1276
1447
1618
1806
1979
2152
2238
3/4
1
18.0
23.0
254.5
415.5
Air
130
204
197
317
317
509
434
697
545
875
657
1055
768
1233
879
1411
993
1594
1105
1773
1219
1956
1442
2314
1665
2672
1888
3030
2112
3389
2357
3783
2583
4144
2808
4506
2921
4687
1-1/4
28.0
615.5
1/2
15.0
176.7
335
522
862
1196
1501
1810
2116
2422
2736
3043
3356
3971
-
76
113
186
260
324
388
452
515
578
641
704
830
955
1081
1206
1331
1456
1583
1643
3/4
1
18.0
23.0
254.5
415.5
Saturated steam
108
170
158
251
250
398
339
540
423
673
507
806
590
940
672
1074
755
1203
837
1335
919
1466
1083
1732
1247
1994
1411
2256
1573
2517
1737
2779
1900
3042
2065
3301
2145
3432
1-1/4
28.0
615.5
277
418
681
934
1165
1396
1624
1852
2079
2306
2532
2984
-
Edition 2016-01
herose.com
53
Safety Valves
Type 06395
Safety Valves, angle type, bronze, type tested TÜV-SV.910. S/G
Standard safety valve, open bonnet, with lifting device and enlarged outlet
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06395.X.2080 (Inlet: male thread type G (BSPP ) acc. to ISO 228/1)
Part No. 06395.X.3080 (Inlet: male thread type R (BSPT) acc. to ISO 7/1)
metal to metal seated for air and similar gases
Working temperature: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Part No. 06395.X.2580 (Inlet: male thread type G (BSPP ) acc. to ISO 228/1)
Part No. 06395.X.3580 (Inlet: male thread type R (BSPT) acc. to ISO 7/1)
with PTFE/carbon filled valve seal for air and similar gases
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06395.X.2680 (Inlet: male thread type G (BSPP ) acc. to ISO 228/1)
Part No. 06395.X.3680 (Inlet: male thread type R (BSPT) acc. to ISO 7/1)
with EPDM valve seal for saturated steam
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Available options - on request only:
· stainless steel inlet body - material 1.4571 · external parts nickel plated
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels and steam boilers.
Materials
1 Body
2 Inlet body
3 Valve seal
4 Disc metal seated
4a Disc soft seated
5 Stem
6 Bonnet
7 Spring
8 Lifting cap
9 Lifting spring
10 Lifting stem
11 Lever
DIN EN
ASME/ASTM
CC491K B 62 UNS C83600
CW614N B 111 UNS C28000
PTFE/Carbon filled or EPDM
1.4541
A 276 Grade 321
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
1.4571
A 313 Grade 316Ti
CW614N B 249 UNS C38500
1.4408
A 351 CF8M
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06395
Nominal size
Orifice
Dimension code
Set pressure range metal seated
Set pressure range PTFE seal
Set pressure range EPDM seal
Outlet
Height
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coeff. of discharge from 3.0 bar
Technical data
GW
1/2
d0
15
.X.
0400
bar
0.5-25
bar
0.5-25
bar
0.5-3
GA
1
H
187
L1
36
L2
48
S1
32
S2
41
ca. kg
0.955
αw
0.64
3/4
18
0600
0.5-25
0.5-25
0.5-7
1-1/4
209
50
59
41
50
1.5
0.58
1
23
1000
0.5-25
0.5-25
0.5-4.6
1-1/2
256
48
69
50
58
2.5
0.57
1-1/4
28
1200
0.5-12
0.5-12
0.5-6
2
284
58
82
55
70
3.85
0.66
Dimensions in mm.
Edition 2016-01
54
Phone: +49 4531 509-0
Safety Valves
Type 06395
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
25.0
1/2
15.0
176.7
92
142
235
333
417
503
589
674
761
846
934
1105
1276
1447
1618
1806
1979
2152
2238
3/4
1
18.0
23.0
254.5
415.5
Air
130
204
197
317
317
509
434
697
545
875
657
1055
768
1233
879
1411
993
1594
1105
1773
1219
1956
1442
2314
1665
2672
1888
3030
2112
3389
2357
3783
2583
4144
2808
4506
2921
4687
1-1/4
28.0
615.5
1/2
15.0
176.7
335
522
862
1196
1501
1810
2116
2422
2736
3043
3356
3971
-
76
113
186
260
324
388
452
515
578
641
704
830
955
1081
1206
1331
1456
1583
1643
3/4
1
18.0
23.0
254.5
415.5
Saturated steam
108
169
158
253
250
402
339
544
423
679
507
813
590
946
672
1079
755
1211
837
1343
919
1475
1083
1738
1247
2001
1411
2264
1573
2525
1737
2788
1900
3050
2065
3314
2145
3442
1-1/4
28.0
615.5
277
418
681
934
1165
1396
1624
1852
2079
2306
2532
2984
-
Edition 2016-01
herose.com
55
Safety Valves
Type 06810, Type 06815
Safety Valves, angle type, stainless steel, type tested, TÜV-SV.1130. S/G/L
Standard safety valve
metal to metal seated, "cleaned and degreased for oxygen service"
closed bonnet, gastight cap or lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06810.X.000000M (Pmax 16.0 bar)
Part No. 06810.X.000000H (Pmax 180.0 bar) stellited version
with gastight cap
Part No. 06815.X.000000M (Pmax 16.0 bar)
Part No. 06815.X.000000H (Pmax 180.0 bar) stellited version
with lifting device
Available options - on request only:
· Flange-, NPT- or Tri-Clamp connection for in- and outlet
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels. Approved for gases,
vapours and liquids. Working temperature: -270°C / -454°F (3K) up to +400°C / +752°F (673K)
Pressure-temperature must be observed, suitable for horizontal installation from 20 bar
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Cap
8 Lifting cap
9 Lever
DIN EN
1.4408
1.4571
1.4571
1.4404
1.4408
1.4571
1.4408
1.4408
1.4301
ASME/ASTM
A 351 CF 8M
A 276 Grade 316Ti
A 276 Grade 316Ti
A 276 Grade 316L
A 351 CF8M
A 313 Grade 316Ti
A 351 CF8M
A 351 CF8M
A 276 Grade 304
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06810, 06815
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Length
Length
Length
Weight 06810
Weight 06815
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
GW
1/2
1/2
3/4
d0
10.0
10.0
10.0
.X.
1022
1023
1033
bar
0.5-180 0.5-180 0.5-180
GA
1/2
3/4
3/4
H1
230
230
230
L1
44
44
44
L2
29
29
29
A1
14
14
16
ca. kg
1.8
1.8
1.8
ca. kg
2.0
2.0
2.0
αw
0.5
0.5
0.5
αw
0.5
0.5
0.5
Dimensions in mm.
Edition 2016-01
56
Phone: +49 4531 509-0
Safety Valves
Type 06810, Type 06815
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013,25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
GW
d0 (mm)
A0 (mm2 )
Medium
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
25.0
30.0
35.0
40.0
45.0
50.0
60.0
70.0
80.0
90.0
100.0
120.0
130.0
140.0
160.0
180.0
A
32
44
67
90
112
134
156
178
200
222
244
288
331
375
418
462
570
680
788
897
1008
1118
1341
1562
1788
2013
2244
2723
2972
-
1/2 & 3/4
10.0
78.5
B
39
55
85
115
145
174
204
234
264
294
324
383
443
502
561
627
777
935
1087
1249
1401
1567
1889
2216
2545
2878
3212
3876
4197
4548
5213
5861
C
1548
2096
2965
3632
4193
4688
5136
5548
5931
6290
6631
7264
7846
8387
8896
9377
10484
11485
12405
13262
14066
14827
16243
17544
18755
19893
20969
22971
23909
24811
26524
28133
Pressure-Temperature Rating
Edition 2016-01
herose.com
57
Safety Valves
Type 06810, Type 06815
Safety Valves, angle type, stainless steel, type tested, TÜV-SV.1130. D/G/F
Standard safety valve
with soft valve seal, "cleaned and degreased for oxygen service"
closed bonnet, gastight cap or lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06810.X.000001L (Pmax 150.0 bar)
with gastight cap
Part No. 06815.X.000001L (Pmax 150.0 bar)
with lifting device
Available options - on request only:
· Flange-, NPT- or Tri-Clamp connection for in- and outlet
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels. Approved for gases,
vapours and liquids. Working temperature: -270°C / -454°F (3K) up to +300°C / +572°F (573K)
Pressure-temperature must be observed, suitable for horizontal installation from 20 bar
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Seal
5 Stem
6 Bonnet
7 Spring
8 Cap
9 Lifting cap
10 Lever
DIN EN
1.4408
1.4571
1.4571
VESPEL
1.4404
1.4408
1.4571
1.4408
1.4408
1.4301
ASME/ASTM
A 351 CF8M
A 276 Grade 316Ti
A 276 Grade 316Ti
A 276 Grade 316L
A 351 CF8M
A 313 Grade 316Ti
A 351 CF8M
A 351 CF8M
A 276 Grade 304
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06810, 06815
D0
Inlet
Outlet
Dimension code
Height
Length
Length
Length
Weight 06810
Weight 06815
Coeff. of discharge
Min. set pressure
Max. set pressure
Min. temperature
Max. temperature
Technical Data
[mm]
10
GW
1/2
GW
1/2
.X.
1022
H1
244.0
L1
44.0
L2
43.0
A1
14.0
ca. kg
1.8
ca. kg
2.0
αw S/G/L
0.50
bar-g
0.5
bar-g
150.0
°C
-270
°C
+300
1/2
3/4
1023
244.0
44.0
43.0
14.0
1.8
2.0
0.50
0.5
150.0
-270
+300
3/4
3/4
1033
246.0
44.0
45.0
16.0
1.8
2.0
0.50
0.5
150.0
-270
+300
Abmessungen in mm.
Edition 2016-01
58
Phone: +49 4531 509-0
Safety Valves
Type 06810, Type 06815
Pressure-Temperature Rating
Edition 2016-01
herose.com
59
Safety Valves
Type 06810, Type 06815
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013,25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
15.0
20.0
30.0
40.0
50.0
60.0
65.0
70.0
80.0
90.0
100.0
110.0
120.0
140.0
150.0
GW
d0 (mm)
A0 (mm2 )
Medium
A
1/2, 3/4 & 1
10.0
78.5
B
39
55
85
115
145
174
204
234
264
294
324
472
627
935
1249
1567
1889
2045
2216
2545
2878
3212
3544
3876
4548
4871
C
1548
2096
2965
3632
4193
4688
5136
5548
5931
6290
6631
6947
9377
11485
13262
14827
16243
16906
-
Edition 2016-01
60
Phone: +49 4531 509-0
Safety Valves
Type 06850, Type 06855
Safety Valves, angle type, stainless steel, type tested, TÜV-SV.1130. S/G/L
Full lift / standard safety valve (D0 10 standard, D0 14 and D0 18 full lift)
metal to metal seated, "cleaned and degreased for oxygen service"
closed bonnet, gastight cap or lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06850.X.000000M (Pmax 20.0 bar)
Part No. 06850.X.000000H (Pmax 250.0 bar) stellited version
with gastight cap
Part No. 06855.X.000000M (Pmax 20.0 bar)
Part No. 06855.X.000000H (Pmax 250.0 bar) stellited version
with lifting device
Available options - on request only:
· Flange-, NPT- or Tri-Clamp connection for in- and outlet
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels. Approved for gases,
vapours and liquids. Working temperature: -270°C / -454°F (3K) up to +400°C / +752°F (673K)
Pressure-temperature must be observed, suitable for horizontal installation from 20 bar
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Cap
8 Lifting cap
9 Lever
DIN EN
1.4408
1.4571
1.4571
1.4404
1.4408
1.4571
1.4408
1.4408
1.4301
ASME/ASTM
A 351 CF8M
A 276 Grade 316Ti
A 276 Grade 316Ti
A 276 Grade 316L
A 351 CF8M
A 313 Grade 316Ti
A 351 CF8M
A 351 CF8M
A 276 Grade 304
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06850, 06855
Orifice
Inlet
Outlet
Dimension code
Height
Length
Length
Weight 06850
Weight 06855
coefficient of
discharge
Min. set pressure
Max. set pressure
Min. temperature
Max. temperature
Technical data
[mm] 10
14
GW
1/2
3/4
1
1/2
1/2
1/2
3/4
GW
1
1
1
1 1-1/4 1-1/2
1
.X.
1024 1034 1044 1424 1425 1426 1434
H1
305.0 307.0 309.0 308.5 308.5 308.5 310.5
L1
53.0 53.0 53.0 55.0 55.0 55.0 55.0
L2
44.5 44.5 44.5 48.2 48.2 48.2 48.2
ca. kg
3.2
3.2
3.2
3.4
3.4
3.4
3.4
3.4
3.4
3.6
3.6
3.6
3.6
ca. kg
3.4
αw D,G / 0.84 / 0.84 / 0.84 / 0.70 / 0.70 / 0.70 / 0.70 /
F
0.68 0.68 0.68
*
*
*
*
bar-g
0.5
0.5
0.5
0.2
0.2
0.2
0.2
bar-g
250.0 250.0 250.0 50.0 50.0 50.0 200.0
°C
-270 -270 -270 -270 -270 -270 -270
°C
+400 +400 +400 +400 +400 +400 +400
3/4
1-1/4
1435
310.5
55.0
48.2
3.4
3.6
0.70 /
*
0.2
200.0
-270
+400
3/4
1
1
1-1/2
1 1-1/4
1436 1444 1445
310.5 312.5 312.5
55.0 55.0 55.0
48.2 48.2 48.2
3.4
3.4
3.4
3.6
3.6
3.6
0.70 / 0.70 / 0.70 /
*
*
*
0.2
0.2
0.2
200.0 200.0 200.0
-270 -270 -270
+400 +400 +400
1
1-1/2
1446
312.5
55.0
48.2
3.4
3.6
0.70 /
*
0.2
200.0
-270
+400
Dimensions in mm. * 0.20-11.50 bar=0.50 / 11.51-74.99 bar=0.49 / 75.00-200.00 bar=0.46
Edition 2016-01
herose.com
61
Safety Valves
Type 06850, Type 06855
Type 06850, 06855
Orifice
Inlet
Outlet
Dimension code
Height
Length
Length
Weight 06850
Weight 06855
coefficient of
discharge
Min. set pressure
Max. set pressure
Min. temperature
Max. temperature
Technical data
[mm] 18
GW
1
GW
1-1/2
.X.
1846
H1
306.0
L1
60.0
L2
49.0
ca. kg
3.9
ca. kg
4.1
αw D,G /
0.76 /
F
0.50
bar-g
0.5
bar-g
110.0
°C
-270
°C
+400
1
2
1847
306.0
63.0
53.0
4.1
4.3
0.76 /
0.50
0.5
110.0
-270
+400
1-1/4
1-1/2
1856
306.0
60.0
49.0
3.9
4.1
0.76 /
0.50
0.5
110.0
-270
+400
1-1/4
2
1857
306.0
63.0
53.0
4.1
4.3
0.76 /
0.50
0.5
110.0
-270
+400
1-1/2
1-1/2
1866
306.0
60.0
49.0
4.0
4.2
0.76 /
0.50
0.5
110.0
-270
+400
1-1/2
2
1867
306.0
63.0
53.0
4.2
4.4
0.76 /
0.50
0.5
110.0
-270
+400
Abmessungen in mm.
Pressure-Temperature Rating
Edition 2016-01
62
Phone: +49 4531 509-0
Safety Valves
Type 06850, Type 06855
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013,25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
15.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
140.0
160.0
180.0
200.0
220.0
240.0
250.0
1/2, 3/4 & 1
10.0
78.5
A
B
46
56
69
88
112
142
151
194
189
243
226
293
264
343
300
393
337
444
374
494
411
544
592
794
774
1053
1139
1572
1509
2098
1882
2633
2256
3175
2630
3723
3008
4276
3393
4835
3790
5396
4202
5931
4629
6512
5519
7642
6447
8758
7575
9846
- 10898
- 11930
- 12982
- 13521
C
2075
2851
4033
4939
5703
6377
6985
7545
8066
8555
9018
11045
12754
15620
18036
20165
22090
23860
25508
27055
28518
29910
31240
33744
36073
38262
40331
42300
44181
45092
1/2, 3/4 & 1
14.0
153.9
A
B
53
56
80
96
112
142
179
228
239
306
297
383
356
461
414
539
471
616
529
696
586
773
643
853
926
1242
1209
1646
1779
2454
2356
3275
2937
4109
3519
4953
4103
5808
4693
6671
5293
7542
5912
8417
6554
9251
7220 10157
8608 11918
- 13658
- 15356
- 16995
-
C
2146
3035
4110
5812
7118
8220
9190
10067
10874
11625
12330
12997
15599
18013
22061
25474
28481
31199
33699
33820
35872
37812
39658
41421
44740
47829
50731
53475
-
1, 1-1/4 & 1-1/2
18.0
254.0
A
B
C
127
152
5017
186
236
6794
309
393
9608
428
549 11767
534
688 13588
639
828 15192
743
967 16642
846
1106 17975
949
1249 19216
1052
1388 20382
1154
1530 21485
1663
2229 26313
2170
2955 30384
3193
4405 37213
4228
5878 42970
5271
7375 48042
6317
8891 52627
7365 10424 56844
8423 11973 60769
9501 13536 64455
10611 15107 67942
11763 16603 71258
-
Edition 2016-01
herose.com
63
Safety Valves
Type 06850, Type 06855
Safety Valves, angle type, stainless steel, type tested, TÜV-SV.1130. S/G/L
standard safety valve
with soft valve seal, " cleaned and degreased "
closed bonnet, gastight cap or lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06850.X.000001L (Pmax 150.0 bar)
with gastight cap
Part No. 06855.X.000001L (Pmax 150.0 bar)
with lifting device
Available options - on request only:
· Flange-, NPT- or Tri-Clamp connection for in- and outlet
Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels. Approved for gases,
vapours and liquids. Working temperature: -270°C / -454°F (3K) up to +300°C / +572°F (573K)
Pressure-temperature must be observed, suitable for horizontal installation from 20 bar
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Seal
5 Stem
6 Bonnet
7 Spring
8 Cap
9 Lifting cap
10 Lever
DIN EN
1.4408
1.4571
1.4571
VESPEL
1.4404
1.4408
1.4571
1.4408
1.4408
1.4301
ASME/ASTM
A 351 CF8M
A 276 Grade 316Ti
A 276 Grade 316Ti
A 276 Grade 316L
A 351 CF8M
A 313 Grade 316Ti
A 351 CF8M
A 351 CF8M
A 276 Grade 304
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Typ 06850, 06855
Orifice
Inlet
Outlet
Dimension code
Height
Length
Length
Weight 06850
Weight 06855
Coefficient of
discharge
Min. set pressure
Max. set pressure
Min. temperature
Max. temperature
Technical data
[mm] 10
14
GW
1/2
3/4
1
1/2
1/2
1/2
3/4
GW
1
1
1
1 1-1/4 1-1/2
1
.X.
1024 1034 1044 1424 1425 1426 1434
H1
305.0 307.0 309.0 308.5 308.5 308.5 310.5
L1
53.0 53.0 53.0 55.0 55.0 55.0 55.0
L2
58.5 60.5 62.5 62.2 62.2 62.2 64.2
ca. kg
3.2
3.2
3.2
3.4
3.4
3.4
3.4
3.4
3.4
3.6
3.6
3.6
3.6
ca. kg
3.4
αw D,G / 0.84 / 0.84 / 0.84 / 0.70 / 0.70 / 0.70 / 0.70 /
F
0.68 0.68 0.68
*
*
*
*
bar-g
0.5
0.5
0.5
0.2
0.2
0.2
0.2
bar-g
150.0 150.0 150.0 50.0 50.0 50.0 120.0
°C
-270 -270 -270 -270 -270 -270 -270
°C
+300 +300 +300 +300 +300 +300 +300
3/4
1-1/4
1435
310.5
55.0
64.2
3.4
3.6
0.70 /
*
0.2
120.0
-270
+300
3/4
1
1
1-1/2
1 1-1/4
1436 1444 1445
310.5 312.5 312.5
55.0 55.0 55.0
64.2 66.2 66.2
3.4
3.4
3.4
3.6
3.6
3.6
0.70 / 0.70 / 0.70 /
*
*
*
0.2
0.2
0.2
120.0 120.0 120.0
-270 -270 -270
+300 +300 +300
1
1-1/2
1446
312.5
55.0
66.2
3.4
3.6
0.70 /
*
0.2
120.0
-270
+300
Dimensions in mm. * 0.20-11.50 bar=0.50 / 11.51-74.99 bar=0.49 / 75.00-120.00 bar=0.46
Edition 2016-01
64
Phone: +49 4531 509-0
Safety Valves
Type 06850, Type 06855
Type 06850, 06855
Orifice
Inlet
Outlet
Dimension code
Height
Length
Length
Weight 06850
Weight 06855
Coefficient of
discharge
Min. set pressure
Max. set pressure
Min. temperature
Max. temperature
Technical data
[mm] 18
GW
1
GW
1-1/2
.X.
1846
H1
306.0
L1
60.0
L2
49.0
ca. kg
3.9
ca. kg
4.1
αw D,G /
0.76 /
F
0.50
bar-g
0.5
bar-g
110.0
°C
-270
°C
+300
1
2
1847
306.0
63.0
53.0
4.1
4.3
0.76 /
0.50
0.5
110.0
-270
+300
1-1/4
1-1/2
1856
306.0
60.0
49.0
3.9
4.1
0.76 /
0.50
0.5
110.0
-270
+300
1-1/4
2
1857
306.0
63.0
53.0
4.1
4.3
0.76 /
0.50
0.5
110.0
-270
+300
1-1/2
1-1/2
1866
306.0
60.0
49.0
4.0
4.2
0.76 /
0.50
0.5
110.0
-270
+300
1-1/2
2
1867
306.0
63.0
53.0
4.2
4.4
0.76 /
0.50
0.5
110.0
-270
+300
Abmessungen in mm.
Pressure-Temperature Rating
Edition 2016-01
herose.com
65
Safety Valves
Type 06850, Type 06855
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013,25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
15.0
20.0
30.0
40.0
45.0
50.0
60.0
65.0
70.0
80.0
90.0
100.0
110.0
120.0
140.0
150.0
A
1/2, 3/4 & 1
10.0
78.5
B
56
88
142
194
243
293
343
393
444
494
544
794
1053
1572
2098
2355
2633
3175
3435
3723
4276
4835
5396
5931
6512
7642
8184
C
2075
2851
4033
4939
5703
6377
6985
7545
8066
8555
9018
11045
12754
15620
18036
19131
20165
22090
22992
-
A
1/2, 3/4 & 1
14.0
153.94
B
56
96
146
235
317
398
480
561
642
725
806
890
1297
1721
2568
3427
3846
4301
5186
5611
6081
6985
7897
8814
9687
- 10637
-
C
2146
3035
4110
5812
7118
8220
9190
10067
10874
11625
12330
12997
15590
18013
22061
25747
27019
28481
-
1, 1-1/4 & 1-1/2
18.0
254.0
A
B
C
152
5017
241
6794
406
9608
569 11767
714 13588
861 15192
1007 16642
1152 17975
1302 19216
1448 20382
1597 21485
2328 26298
3089 30384
4609 37213
6152 42970
6903 45577
7720
9307
- 10071
- 10913
- 12536
- 14174
- 15819
- 17387
-
*not suitable for water steam!
Edition 2016-01
66
Phone: +49 4531 509-0
Edition 2016-01
herose.com
67
Safety Valves
Type 50051.0004
Safety Valves, angle type, bronze
Lloyds Register Approval LR-TA 92/20011
Standard safety valve
metal to metal seated,
closed bonnet, with lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 50051.0004.0000
Applications:
Provided as safety device for protection against thermal expansion
in electric or steam fired heat exchangers for vapours, gases and fluids,
specific for heavy oil and lubricants (especially for ships).
Approved for fluids, vapours and gases.
Working temperature: -10°C / +14°F (263K) up to +160°C / +320°F (403K)
Materials
1 Body
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Bonnet
7 Spring clamp
8 Thread ring
9 Lifting cap
10 Lifting spring
11 Lifting stem
12 Lifting device
DIN EN
CC491K
1.4301
1.4541
CW614N
1.4571
CW614N
CW614N
CW614N
CW614N
1.4571
CW614N
CW614N
ASME/ASTM
B 62 UNS C83600
A 276 Grade 304
A 276 Grade 321
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 249 UNS C38500
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Type 50051.0004
Nominal size
Orifice
Set pressure range
Outlet
Height
Length
Length
Length
Wrench size across flats
Weight
Coefficient of discharge
Technical data
GW
1/2
d0
7
bar
6.0-15.0
GA
1/2
H
122
L1
25
L2
28
A1
10
S1
27
ca. kg
0.38
αw
0.68
Dimensions in mm.
Edition 2016-01
68
Phone: +49 4531 509-0
Safety Valves
Type 50051.0004
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
GW
d0 (mm)
A0 (mm2 )
Medium
1/2
7.0
38.48
Air
136
155
176
195
216
235
255
275
295
315
1/2
7.0
38.48
Water
3422
3697
3952
4192
4419
4634
4840
5038
5228
5412
Edition 2016-01
herose.com
69
Safety Valves
Type 50051.0011
Safety Valves, angle type, brass, type tested TÜV-SV.1009. S/G
Standard safety valve
with EPDM valve seal for vapours and gases
open bonnet, with lifting device
Outlet: female thread M15x1 with installed hose nozzle
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 50051.0011.0000
Available options - on request only:
· hose nozzle acc. to customer specification
· body material CW509L
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels, especially for coffee machines.
Approved for non-toxic gases and vapours.
Working temperature: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
For saturated steam use only up to 4 bar and +150°C / +302°F (423K)
Materials
1 Body
2 Disc
3 Valve seal
4 Stem
5 Bonnet
6 Spring
7 Lifting device
8 Closing cap
9 Hose nozzle
DIN EN
CW614N
CW614N
EPDM
CW614N
CW614N
1.4571
CW614N
CC507L
CW614N
ASME/ASTM
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 313 Grade 316Ti
B 249 UNS C38500
B 36 UNS C26800
B 249 UNS C38500
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 50051.0011
Nominal size
Orifice
Set pressure range
Hose nozzle-Ø
Height
Length
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Coeff. of discharge from 2.0 bar
Technical data
GW
3/8
d0
7
bar
1.5-5.0
M
14.5
H
64
L1
28.5
L2
13
A1
12
S1
27
S2
17
ca. kg
0.16
αw
0.42
Dimensions in mm.
Edition 2016-01
70
Phone: +49 4531 509-0
Safety Valves
Type 50051.0011
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
GW
d0 (mm)
A0 (mm2 )
Medium
3/8
7.0
38.48
Air
28
35
41
47
53
59
65
72
3/8
7.0
38.48
Saturated steam
22
27
32
37
41
46
51
55
Edition 2016-01
herose.com
71
Safety Valves
Type 06310
Safety Valves, angle type, ductile casting GGG-40.3,
type tested, TÜV-SV.909. S/G/L
Full lift safety valve
Standard safety valve for fluids
metal to metal seated,
closed bonnet, with lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06310.X.0000
Available options - on request only:
· Disc with soft sealing (NBR, CR, EPDM, FKM, FFKM, PCTFE, PTFE-FDA)
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -10°C / +14°F (263K) up to +300°C / +572°F (573K)
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Lifting device
DIN EN
0.7043
1.4104
1.4122
1.4021
0.7043
1.4310
0.7040
ASME/ASTM
A 536-87 Gr. 60-40-18
A 276 Grade 430F
no reference
A 276 Grade 420
A 536-87 Gr. 60-40-18
A 313 Grade 301
A 536-87 Gr. 60-40-18
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Type 06310
Nominal size
Orifice
Dimension code
Set pressure saturated steam
Set pressure air and fluids
Outlet
Height
Length
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
GW
3/4
3/4
1
d0
9
13
17.5
.X.
0906
1306
1710
bar
2.0-150 0.2-150 0.2-100
bar
2.0-250 0.2-250 0.2-100
GA
1
1
1-1/2
H
280
280
281
L1
50
50
54
L2
75
75
75
A1
16
16
18
ca. kg
2.6
2.6
3.0
αw
0.83
0.81
0.79
αw
0.61
0.53
0.52
Dimensions in mm.
Edition 2016-01
72
Phone: +49 4531 509-0
Safety Valves
Type 06310
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
30.0
40.0
50.0
60.0
80.0
100.0
150.0
200.0
250.0
A
93
127
158
189
220
282
343
496
650
802
957
1268
1588
1910
2583
3296
5438
-
3/4
9
63.6
B
113
155
195
234
274
353
432
629
827
1025
1223
1618
2014
2409
3201
3992
5969
7947
9924
C
2930
3590
4140
4630
5070
5860
6550
8020
9260
10400
11300
13100
14600
16000
18500
20700
25400
29300
32700
A
53
84
120
190
258
322
386
449
573
699
1009
1323
1632
1949
2582
3234
3889
5259
6711
11072
-
3/4
13
132.7
B
61
98
143
229
316
396
477
557
718
879
1281
1685
2087
2490
3295
4101
4906
6517
8127
12153
16181
20248
C
1960
2770
3750
5310
6500
7510
8390
9190
10600
11900
14500
16800
18800
20600
23700
26500
29100
33600
37500
46000
53100
59500
A
85
134
200
331
456
569
681
793
1013
1235
1783
2338
2885
3445
4562
5715
6874
9294
11862
-
1
17.5
240.6
B
98
157
238
400
558
700
842
985
1269
1554
2264
2977
3688
4401
5824
7247
8671
11518
14364
-
C
3480
4930
6670
9440
11600
13300
14900
16300
18900
21100
25800
29800
33400
36500
42200
47200
51700
59700
66700
-
Edition 2016-01
herose.com
73
Safety Valves
Type 06311
Safety Valves, angle type, stainless steel,
type tested, TÜV-SV.909. S/G/L
Full lift safety valve
Standard safety valve for fluids
metal to metal seated,
closed bonnet, with lifting device
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06311.X.0000
Available options - on request only:
· Disc with soft sealing (NBR, CR, EPDM, FKM, FFKM, PCTFE, PTFE-FDA)
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -196°C / -321°F (77K) up to +300°C / +572°F (573K)
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Lifting device
DIN EN
1.4404
1.4404
1.4404
1.4404
1.4404
1.4310
1.4408
ASME/ASTM
A 276 Grade 316L
A 276 Grade 316L
A 276 Grade 316L
A 276 Grade 316L
A 276 Grade 316L
A 313 Grade 301
A 351 CF 8M
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Type 06311
Nominal size
Orifice
Dimension code
Set pressure saturated steam
Set pressure air and fluids
Outlet
Height
Length
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
GW
3/4
3/4
1
d0
9
13
17.5
.X.
0906
1306
1710
bar
1.5-200 0.2-200 0.2-100
bar
1.5-250 0.2-200 0.2-100
GA
1
1
1-1/2
H
280
280
281
L1
50
50
54
L2
75
75
75
A1
16
16
18
ca. kg
2.6
2.6
3.0
αw
0.83
0.81
0.79
αw
0.61
0.53
0.52
Dimensions in mm.
Edition 2016-01
74
Phone: +49 4531 509-0
Safety Valves
Type 06311
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
30.0
40.0
50.0
60.0
80.0
100.0
150.0
200.0
250.0
A
93
127
158
189
220
282
343
496
650
802
957
1268
1588
1910
2583
3296
5438
-
3/4
9
63.6
B
113
155
195
234
274
353
432
629
827
1025
1223
1618
2014
2409
3201
3992
5969
7947
9924
C
2930
3590
4140
4630
5070
5860
6550
8020
9260
10400
11300
13100
14600
16000
18500
20700
25400
29300
32700
A
53
84
120
190
258
322
386
449
573
699
1009
1323
1632
1949
2582
3234
3889
5259
6711
11072
-
3/4
13
132.7
B
61
98
143
229
316
396
477
557
718
879
1281
1685
2087
2490
3295
4101
4906
6517
8127
12153
16181
20248
C
1960
2770
3750
5310
6500
7510
8390
9190
10600
11900
14500
16800
18800
20600
23700
26500
29100
33600
37500
46000
53100
59500
A
85
134
200
331
456
569
681
793
1013
1235
1783
2338
2885
3445
4562
5715
6874
9294
11862
-
1
17.5
240.6
B
98
157
238
400
558
700
842
985
1269
1554
2264
2977
3688
4401
5824
7247
8671
11518
14364
-
C
3480
4930
6670
9440
11600
13300
14900
16300
18900
21100
25800
29800
33400
36500
42200
47200
51700
59700
66700
-
Edition 2016-01
herose.com
75
Safety Valves
Type 06315
Safety Valves, angle type, chromium steel, type tested, TÜV-SV.980. S/G/L
Standard safety valve
metal to metal seated, closed bonnet
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06315.X.N000 (0.1 - 93.0 bar)
Part No. 06315.X.L000 (93.0 - 180.0 bar)
with lifting device - head A
Part No. 06315.X.N020 (0.1 - 93.0 bar)
Part No. 06315.X.L020 (93.0 - 180.0 bar)
with gastight cap - head C
Available options - on request only:
· Threads NPT acc. to ANSI B 1.20.1
· Disc with soft sealing (NBR, CR, EPDM, FKM, FFKM, PCTFE, PTFE-FDA)
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels. Approved for gases, vapours and fluids.
Working temperature: -10°C / +14°F (263K) up to +220°C / +428°F (493K)
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Lifting device
7 Cap
DIN EN
1.4104
1.4104
1.4122
1.4021
1.4310
1.4104
1.0718
ASME/ASTM
A 276 Grade 430F
A 276 Grade 430F
no reference
A 276 Grade 420
A 313 Grade 301
A 276 Grade 430F
A 108
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Technical data
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Height
Height
Height
Length
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
GW
d0
.X.
bar
GA
H1
H2
H3
H4
L1
L2
A1
ca. kg
αw
αw
Type 06315.X.N000/N020 Type 06315.X.L000/L020
1/2
3/4
1/2
3/4
10
10
10
10
1004
1006
1004
1006
0.1-93
0.1-93
93-180
93-180
1/2
1/2
1/2
1/2
195
195
216
216
180
180
191
191
30
30
30
30
33
33
33
33
15
16
15
16
1.2
1.2
1.4
1.4
0.50
0.50
0.50
0.50
0.35
0.35
0.35
0.35
Dimensions in mm.
Edition 2016-01
76
Phone: +49 4531 509-0
Safety Valves
Type 06315
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
0.1
0.5
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
30.0
40.0
50.0
60.0
70.0
80.0
100.0
150.0
180.0
GW
d0 (mm)
A0 (mm2 )
Medium
A
12
29
43
70
94
118
141
164
209
255
369
483
596
712
943
1181
1421
1670
1921
2451
4044
-
1/2 & 3/4
10.0
78.5
B
14
34
51
84
115
145
174
204
262
321
468
615
762
909
1204
1498
1792
2086
2380
2969
4439
5322
C
630
1080
1470
2070
2540
2930
3280
3590
4150
4640
5680
6560
7330
8030
9270
10400
11400
12300
13100
14700
18000
19700
Edition 2016-01
herose.com
77
Safety Valves
Type 06316
Safety Valves, angle type, stainless steel, type tested, TÜV-SV.980. S/G/L
Standard safety valve
metal to metal seated, closed bonnet
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06316.X.N000 (0.1 - 68.0 bar)
Part No. 06316.X.L000 (68.0 - 330.0 bar)
with lifting device - head A
Part No. 06316.X.N020 (0.1 - 68.0 bar)
Part No. 06316.X.L020 (68.0 - 330.0 bar)
with gastight cap - head C
Available options - on request only:
· Threads NPT acc. to ANSI B 1.20.1
· Disc with soft sealing (NBR, CR, EPDM, FKM, FFKM, PCTFE, PTFE-FDA)
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels. Approved for gases, vapours and fluids.
Working temperature (pay attention to AD-Merkblatt W10: Temperature-PressureOverview): -270°C / -454°F (6K) up to +280°C / +536°F (553K)
Materials
1 Outlet body
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Lifting device
7 Cap
DIN EN
1.4404
1.4404
1.4404
1.4404
1.4310
1.4404
1.4404
ASME/ASTM
A 276 Grade 316L
A 276 Grade 316L
A 276 Grade 316L
A 276 Grade 316L
A 313 Grade 301
A 276 Grade 316L
A 276 Grade 316L
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Technical data
Nominal size
GW
Orifice
d0
Dimension code
.X.
Set pressure range
bar
Outlet
GA
Height
H1
Height
H2
Height
H3
Height
H4
Length
L1
Length
L2
Length
A1
Weight
ca. kg
Coeff. of discharge gases, vapours αw
Coeff. of discharge fluids
αw
Type 06316.X.N000/N020 Type 06316.X.L000/L020
1/2
3/4
1/2
3/4
10
10
6
6
1004
1006
0604
0606
0.1-68
0.1-68
180-330
180-330
1/2
1/2
1/2
1/2
195
195
201
201
180
180
191
191
30
30
30
30
33
33
33
33
15
16
15
16
1.2
1.2
1.4
1.4
0.50
0.50
0.72
0.72
0.35
0.35
-
1/2
10
1004
68-180
1/2
216
191
30
33
15
1.4
0.50
0.35
3/4
10
1006
68-180
1/2
216
191
30
33
16
1.4
0.50
0.35
Dimensions in mm.
Edition 2016-01
78
Phone: +49 4531 509-0
Safety Valves
Type 06316
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.5
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
30.0
40.0
50.0
60.0
70.0
80.0
100.0
150.0
180.0
200.0
250.0
300.0
330.0
6
28.3
B
2759
3064
3826
4589
5046
1/2 & 3/4
10
78.5
A
B
12
14
29
34
43
51
70
84
94
115
118
145
141
174
164
204
209
262
255
321
369
468
483
615
596
762
712
909
943
1204
1181
1498
1421
1792
1670
2086
1921
2380
2451
2969
4044
4439
5322
-
C
630
1080
1470
2070
2540
2930
3280
3590
4150
4640
5680
6560
7330
8030
9270
10400
11400
12300
13100
14700
18000
19700
-
Edition 2016-01
herose.com
79
Safety Valves
Type 06317
Safety Valves, angle type, stainless steel,
type tested, TÜV-SV.847. S/G/L (G 3/8 - G 1/2, d0 = 6.0 only S/G)
type tested, TÜV-SV.878. S/G/L (G 3/4 - G 1-1/4)
metal to metal seated, closed bonnet
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06317.X.0000
with lifting device - head A
Part No. 06317.X.0020
with gastight cap - head C
Available options - on request only:
· Disc with soft sealing (EPDM, FKM, PTFE)
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels. Approved for gases, vapours and fluids.
Working temperature: -60°C / -76°F (213K) up to +280°C / +536°F (553K)
Materials
1 Body + bonnet
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Lifting cap
7 Lifting stem
8 Lever
9 Cap
DIN EN
1.4581
1.4571
1.4571
1.4571
1.4310
1.4581
1.4305
3.2581
1.4581
ASME/ASTM
A 351 CF 10MC
A 276 Grade 316Ti
A 276 Grade 316Ti
A 276 Grade 316Ti
A 313 Grade 301
A 351 CF 10MC
A 276 Grade 303
no reference
A 351 CF 10MC
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06317
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Height
Length
Length
Length
Wrench size across flats
Weight
Coeff. of discharge
gases,vapours
Coeff. of discharge fluids
Technical data
GW
3/8
1/2
1/2
1/2
1/2
d0
10
6
8
10
12.5
.X.
1003
0604 0804 1004 1204
bar
0.1-140 120-500 20-200 0.1-140 0.1-70
GA
1/2
3/4
1/2
1/2
1/2
H1
200
200
200
200
200
H2
185
185
185
185
185
L1
40
40
40
40
40
L2
34
34
34
34
34
A1
12
14
12
14
14
S1
32
32
32
32
32
ca. kg
1.0
1.0
1.0
1.0
1.0
0.42
0.42
0.38
0.27
αw
0.38
αw
0.30
-
0.30
0.30
3/4
3/4
12.5
16
1206 1606
32-70 0.1-32
1
1
230
230
215
215
50
50
40
40
16
16
41
41
1.6
1.6
0.37
0.29
0.20
0.29
0.23
1
1 1-1/4 1-1/4
12.5
16
16
20
1210 1610 1612 2012
32-70 0.1-32 0.1-32 0.1-20
1
1
1
1
230
230
230
230
215
215
215
215
50
50
50
50
40
40
40
40
18
18
20
20
41
41
50
50
1.6
1.6
1.8
1.8
0.37
0.29
0.29
0.11
0.29
0.23
0.23
0.08
Dimensions in mm.
Edition 2016-01
80
Phone: +49 4531 509-0
Safety Valves
Type 06317
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
35.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
120.0
140.0
160.0
180.0
200.0
250.0
300.0
350.0
400.0
450.0
500.0
1/2
6
28.3
B
1627
1909
2182
2455
2782
3541
4332
5156
6019
6923
7873
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
35.0
3/4. 1 & 1-1/4
16
201.1
A
B
C
23
29 1052
36
50 1663
67
81 2467
100
127 3489
134
171 4273
167
215 4934
232
303 6043
298
391 6978
363
479 7801
686
920 11033
1011 1364 13512
1174 1587 14595
A
249
366
425
484
602
722
843
968
1096
1225
1486
1754
-
1/2
8
50.3
B
C
333 3598
494 4406
575 4759
656 5088
819 5688
983 6231
1148 6730
1314 7195
1482 7632
1650 8044
1991 8812
2337 9518
2725 10186
3065 10704
3406 11376
-
A
13
19
39
59
79
99
138
177
215
407
-
3/8 & 1/2
10
78.5
A
B
12
15
17
24
33
40
51
64
68
88
85
110
119
155
152
200
186
245
351
471
518
698
601
812
684
927
851
1157
1021 1389
1192 1622
1368 1858
1549 1549
1731 1731
2100 2100
2479 2479
1-1/4
20
314.2
B
16
27
48
75
102
128
180
232
284
545
-
C
536
847
1257
1778
2177
2514
3079
3555
3975
5621
6884
7436
7949
8888
9736
10516
11242
11924
12569
13769
14872
-
A
12
19
36
57
76
95
132
169
207
390
575
667
759
945
1133
1324
-
1/2
12.5
122.7
B
C
15
558
26
883
44 1309
72 1852
97 2269
122 2619
172 3207
222 3703
272 4140
523 5855
775 7171
902 7746
1029 8280
1285 9258
1542 10141
1801 10954
-
A
914
1040
1295
1553
1814
-
3/4 & 1
12.5
122.7
B
1236
1410
1760
2113
2469
-
C
11232
12007
13424
14706
15884
-
C
572
904
1341
1896
2322
2682
3284
3792
4240
5996
-
Edition 2016-01
herose.com
81
Safety Valves
Type 06318
Safety Valves, angle type, ductile casting GGG-40.3,
type tested, TÜV-SV.847. S/G/L (G 3/8 - G 1/2)
type tested, TÜV-SV.878. S/G/L (G 3/4 - G 1-1/4)
metal to metal seated, closed bonnet
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06318.X.0000
with lifting device - head A
Part No. 06318.X.0020
with gastight cap - head C
Available options - on request only:
· Disc with soft sealing (EPDM, FKM, PTFE)
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -10°C / +14°F (263K) up to +200°C / +392°F (473K)
Materials
1 Body + Bonnet
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Lifting cap
7 Lifting stem
8 Lever
9 Cap
DIN EN
0.7043
1.4104
1.4571
1.4104
1.4310
1.4104
1.4305
3.2581
1.0718
ASME/ASTM
A 395
A 276 Grade 430F
A 276 Grade 316Ti
A 276 Grade 430F
A 313 Grade 301
A 276 Grade 430F
A 276 Grade 303
no reference
A 108
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06318
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Height
Length
Length
Length
Wrench size across flats
Weight
Coeff. of discharge gases,
vapours
Coeff. of discharge fluids
Technical data
GW
3/8
1/2
1/2
d0
10
8
10
.X.
1003
0804
1004
bar
0.1-140 20-200 0.1-140
GA
1/2
1/2
1/2
H1
200
200
200
H2
185
185
185
L1
40
40
40
L2
34
34
34
A1
12
12
14
S1
32
32
32
ca. kg
1.0
1.0
1.0
0.42
0.38
αw
0.38
αw
0.30
0.30
0.30
1/2
12.5
1204
0.1-70
1/2
200
185
40
34
14
32
1.0
0.27
3/4
12.5
1206
32-70
1
230
215
50
40
16
41
1.6
0.37
3/4
16
1606
0.1-32
1
230
215
50
40
16
41
1.6
0.29
1
12.5
1210
32-70
1
230
215
50
40
18
41
1.6
0.37
1
16
1610
0.1-32
1
230
215
50
40
18
41
1.6
0.29
1-1/4
16
1612
0.1-32
1
230
215
50
40
20
50
1.8
0.29
1-1/4
20
2012
0.1-20
1
230
215
50
40
20
50
1.8
0.11
0.20
0.29
0.23
0.29
0.23
0.23
0.08
Dimensions in mm.
Edition 2016-01
82
Phone: +49 4531 509-0
Safety Valves
Type 06318
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
35.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
120.0
140.0
160.0
180.0
200.0
3598
4406
4759
5088
5688
6231
6730
7195
7632
8044
8812
9518
10186
10704
11376
3/8 & 1/2
10
78.5
A
B
12
15
17
24
33
40
51
64
68
88
85
110
119
155
152
200
186
245
351
471
518
698
601
812
684
927
851
1157
1021
1389
1192
1622
1368
1858
1549
1549
1731
1731
2100
2100
2479
2479
-
C
536
847
1257
1778
2177
2514
3079
3555
3975
5621
6884
7436
7949
8888
9736
10516
11242
11924
12569
13769
14872
-
249
366
425
484
602
722
843
968
1096
1225
1486
1754
-
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
35.0
3/4. 1 & 1-1/4
16
201.1
A
B
C
23
29
1052
36
50
1663
67
81
2467
100
127
3489
134
171
4273
167
215
4934
232
303
6043
298
391
6978
363
479
7801
686
920 11033
1011
1364 13512
1174
1587 14595
1-1/4
20
314.2
B
16
27
48
75
102
128
180
232
284
545
-
C
572
904
1341
1896
2322
2682
3284
3792
4240
5996
-
A
1/2
8
50.3
B
333
494
575
656
819
983
1148
1314
1482
1650
1991
2337
2725
3065
3406
C
A
13
19
39
59
79
99
138
177
215
407
-
A
12
19
36
57
76
95
132
169
207
390
575
667
759
945
1133
1324
-
1/2
12.5
122.7
B
15
26
44
72
97
122
172
222
272
523
775
902
1029
1285
1542
1801
-
C
558
883
1309
1852
2268
2619
3207
3703
4140
5855
7171
7746
8280
9258
10141
10954
-
A
914
1040
1295
1553
1814
-
3/4 & 1
12.5
122.7
B
1236
1410
1760
2113
2469
-
C
11232
12007
13424
14706
15884
-
Edition 2016-01
herose.com
83
Safety Valves
Type 06319
Safety Valves, angle type, stainless steel,
type tested, TÜV-SV.847. S/G/L (G 3/8 - G 1/2)
type tested, TÜV-SV.878. S/G/L (G 3/4 - G 1-1/4)
metal to metal seated, closed bonnet
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06319.X.0020
with gastight cap
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -200°C / -328°F (73K) up to +280°C / +536°F (553K)
Materials
1 Body + Bonnet
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Cap
DIN EN
1.4308
1.4571
1.4571
1.4571
1.4310
1.4571
ASME/ASTM
A 351 CF8
A 276 Grade 316Ti
A 276 Grade 316Ti
A 276 Grade 316Ti
A 313 Grade 301
A 276 Grade 316Ti
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06319
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Length
Length
Length
Wrench size across flats
Weight
Coeff. of discharge gases,
vapours
Coeff. of discharge fluids
Technical data
1/2
1/2
GW
3/8
d0
10
8
10
.X.
1003
0804
1004
bar
0.1-140 20-200 0.1-140
GA
1/2
1/2
1/2
H
185
185
185
L1
40
40
40
L2
34
34
34
A1
12
12
14
S1
32
32
32
ca. kg
1.0
1.0
1.0
αw
0.38
0.42
0.38
αw
0.30
0.30
0.30
1/2
12.5
1204
0.1-70
1/2
185
40
34
14
32
1.0
0.27
3/4
12.5
1206
32-70
1
215
50
40
16
41
1.6
0.37
3/4
16
1606
0.1-32
1
215
50
40
16
41
1.6
0.29
1
12.5
1210
32-70
1
215
50
40
18
41
1.6
0.37
1
16
1610
0.1-32
1
215
50
40
18
41
1.6
0.29
1-1/4
16
1612
0.1-32
1
215
50
40
20
50
1.8
0.29
1-1/4
20
2012
0.1-20
1
215
50
40
20
50
1.8
0.11
0.20
0.29
0.23
0.29
0.23
0.23
0.08
Dimensions in mm.
Edition 2016-01
84
Phone: +49 4531 509-0
Safety Valves
Type 06319
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
35.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
120.0
140.0
160.0
180.0
200.0
3598
4406
4759
5088
5688
6231
6730
7195
7632
8044
8812
9518
10186
10704
11376
3/8 & 1/2
10
78.5
A
B
12
15
17
24
33
40
51
64
68
88
85
110
119
155
152
200
186
245
351
471
518
698
601
812
684
927
851
1157
1021
1389
1192
1622
1368
1858
1549
1549
1731
1731
2100
2100
2479
2479
-
249
366
425
484
602
722
843
968
1096
1225
1486
1754
-
C
536
847
1257
1778
2177
2514
3079
3555
3975
5621
6884
7436
7949
8888
9736
10516
11242
11924
12569
13769
14872
-
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
35.0
3/4. 1 & 1-1/4
16
201.1
A
B
C
23
29
1052
36
50
1663
67
81
2467
100
127
3489
134
171
4273
167
215
4934
232
303
6043
298
391
6978
363
479
7801
686
920 11033
1011
1364 13512
1174
1587 14595
1-1/4
20
314.2
B
16
27
48
75
102
128
180
232
284
545
-
C
572
904
1341
1896
2322
2682
3284
3792
4240
5996
-
A
1/2
8
50.3
B
333
494
575
656
819
983
1148
1314
1482
1650
1991
2337
2725
3065
3406
C
A
13
19
39
59
79
99
138
177
215
407
-
A
12
19
36
57
76
95
132
169
207
390
575
667
759
945
1133
1324
-
1/2
12.5
122.7
B
15
26
44
72
97
122
172
222
272
523
775
902
1029
1285
1542
1801
-
C
558
883
1309
1852
2268
2619
3207
3703
4140
5855
7171
7746
8280
9258
10141
10954
-
A
914
1040
1295
1553
1814
-
3/4 & 1
12.5
122.7
B
1236
1410
1760
2113
2469
-
C
11232
12007
13424
14706
15884
-
Edition 2016-01
herose.com
85
Safety Valves
Type 06120, Type 06121
Safety Valves, angle type, cast iron
type tested, TÜV-SV.577. S/G/L
Standard safety valve
metal to metal seated, with lifting device
Flanged connection acc. to DIN EN 1092-1 PN16
Part No. 06120.X.0000
open bonnet
Part No. 06121.X.0000
closed bonnet
Available options - on request only:
· Disc with soft sealing
· Extended pressure and temperature ranges
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -10°C / +14°F (263K) up to +200°C / +392°F (473K)
Materials
1 Body
2 Disc
3 Stem
4 Spring
5 Bonnet
6 Lifting device
DIN EN
0.6025
1.4122
1.4021
1.1200
0.7040
0.7040
ASME/ASTM
A 48-83 Gr. 35B
no reference
A 276 Grade 420
A 227
A 536-87 Gr. 60-40-18
A 536-87 Gr. 60-40-18
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06120, 06121
Nominal size
Orifice
Dimension code
Set pressure range
Flange diameter
Height Type 06120
Height Type 06121
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
DN
15
20
25
32
40
50
65
80
100
d0
12
18
18
18
23
29
37
46
60
0200
0250
0320
0400
0500
0650
0800
1000
.X.
0150
bar
0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16
D
95
105
115
140
150
165
185
200
220
H
310
315
320
325
335
360
470
525
605
H
305
310
315
320
330
355
475
530
590
L1
90
95
100
105
115
125
145
155
175
L2
90
95
100
105
115
125
145
155
175
ca. kg
5.0
6.0
6.0
8.0
9.0
12.0
15.0
20.0
33.0
αw
0.62
0.29
0.38
0.38
0.38
0.38
0.38
0.38
0.38
αw
0.48
0.19
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Dimensions in mm.
Edition 2016-01
86
Phone: +49 4531 509-0
Safety Valves
Type 06120, Type 06121
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
A
55
78
125
168
210
251
293
333
374
415
456
538
618
699
A
88
163
263
442
603
752
900
1048
1192
1339
1485
1632
1924
2211
2503
15
12
113.1
B
67
93
151
206
258
311
363
416
468
521
573
679
784
889
50
29
660.6
B
101
191
313
534
737
925
1113
1301
1489
1677
1865
2053
2429
2805
3181
C
2140
2900
4100
5020
5790
6480
7090
7660
8190
8690
9160
10000
10800
11600
C
4600
6510
8810
12500
15300
17600
19700
21600
23300
24900
26400
27900
30500
33000
35200
A
20
18
254.5
B
30
67
129
177
221
265
308
350
394
437
480
566
650
736
35
80
156
217
272
327
382
438
493
548
604
714
825
935
A
142
265
428
720
981
1224
1465
1706
1940
2179
2418
2656
3132
3599
4074
65
37
1075.3
B
165
311
510
870
1199
1505
1811
2117
2423
2729
3035
3342
3954
4566
5178
C
1900
2580
3650
4470
5160
5770
6320
6820
7300
7740
8160
8930
9650
10300
C
7500
10600
14300
20300
24800
28700
32100
35100
37900
40600
43000
45300
49700
53700
57400
34
63
101
170
232
290
347
404
459
516
572
629
741
852
964
25 & 32
18
254.5
B
39
74
121
206
284
356
429
501
574
646
718
791
936
1081
1225
A
220
410
661
1113
1517
1892
2265
2636
2999
3368
3737
4105
4842
5563
6297
80
46
1662.1
B
255
481
788
1344
1854
2327
2800
3273
3746
4219
4692
5165
6111
7057
8003
A
C
1770
2510
3390
4800
5880
6790
7590
8310
8980
9600
10200
10700
11800
12700
13600
C
11600
16400
22200
31300
38400
44300
49600
54300
58600
62700
66500
70100
76800
82900
88700
55
102
165
278
379
473
566
659
750
842
934
1026
1210
1391
1574
40
23
415.5
B
63
120
197
336
463
582
700
818
936
1055
1173
1291
1528
1764
2001
C
2890
4090
5540
7840
9600
11100
12400
13600
14700
15700
16600
17500
19200
20700
22200
A
375
697
1125
1893
2581
3218
3853
4485
5102
5730
6358
6984
8237
9464
10714
100
60
2827.8
B
431
819
1341
2287
3153
3958
4763
5568
6373
7177
7982
8787
10397
12006
13616
C
19700
27800
37700
53300
65300
75400
84300
92400
99800
107000
113000
119000
131000
141000
151000
A
Edition 2016-01
herose.com
87
Safety Valves
Type 06125, Type 06126
Safety Valves, angle type, cast steel
type tested, TÜV-SV.577. S/G/L
Standard safety valve
metal to metal seated, with lifting device
Flanged connection acc. to DIN EN 1092-1 PN40
Part No. 06125.X.0000
open bonnet
Part No. 06126.X.0000
closed bonnet
Available options - on request only:
· Disc with soft sealing
· Extended pressure and temperature ranges
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -85°C / -121°F (188K) up to +450°C / +842°F (723K)
Materials
1 Body
2 Disc
3 Stem
4 Spring
5 Bonnet
6 Lifting device
DIN EN
1.0619
1.4122
1.4021
1.1200
1.0619
0.7040
ASME/ASTM
A 216 Grade WCB
no reference
A 276 Grade 420
A 227
A 216 Grade WCB
A 536-87 Gr. 60-40-18
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06125, 06126
Technical data
Nominal size
DN
15
Orifice
d0
12
Dimension code
.X.
0150
Set pressure saturated steam bar
0.2-32
Set pressure air and fluids
bar
0.2-40
Flange diameter
D
95
Height Type 06125
H
310
Height Type 06126
H
305
Length
L1
90
Length
L2
90
Weight
ca. kg
5.0
Coeff. of discharge gases,
αw
0.62
vapours
Coeff. of discharge fluids
αw
0.48
20
18
0200
0.2-32
0.2-40
105
315
310
95
95
6.0
0.29
25
18
0250
0.2-32
0.2-40
115
320
315
100
100
6.0
0.38
32
18
0320
0.2-32
0.2-40
140
325
320
105
105
8.0
0.38
40
23
0400
0.2-32
0.2-40
150
335
330
115
115
9.0
0.38
50
29
0500
0.2-32
0.2-40
165
360
355
125
125
12.0
0.38
65
37
0650
0.2-32
0.2-40
185
470
475
145
145
15.0
0.38
80
46
0800
0.2-32
0.2-35
200
525
530
155
155
20.0
0.38
100
60
1000
0.2-30
0.2-30
235
605
590
175
175
33.0
0.38
125
74
1250
0.2-24
0.2-32
270
740
745
200
200
48.0
0.38
0.19
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Dimensions in mm.
Edition 2016-01
88
Phone: +49 4531 509-0
Safety Valves
Type 06125, Type 06126
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
24.0
28.0
32.0
36.0
40.0
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
24.0
28.0
32.0
34.0
36.0
40.0
A
55
78
125
168
210
251
293
333
374
415
456
538
699
863
1024
1189
1354
-
15
12
113.1
B
67
93
151
206
258
311
363
416
468
521
573
679
889
1099
1309
1519
1729
1939
2149
A
142
265
428
720
981
1224
1465
1706
1940
2179
2418
2656
3132
4074
5027
5967
6925
7890
-
C
A
2140
30
2900
67
4100
129
5020
177
5790
221
6480
265
7090
308
7660
350
8190
394
8690
437
9160
480
10000
566
11600
736
13000
908
14200 1078
15300 1251
16400 1425
17400
18300
-
65
37
1075.3
B
165
311
510
870
1199
1505
1811
2117
2423
2729
3035
3342
3954
5178
6402
7626
8851
10075
10687
11299
12523
C
7500
10600
14300
20300
24800
28700
32100
35100
37900
40600
43000
45300
49700
57400
64100
70200
75900
81100
83600
86000
90700
20
18
254.5
B
35
80
156
217
272
327
382
438
493
548
604
714
935
1156
1377
1599
1820
2041
2262
1900
2580
3650
4470
5160
5770
6320
6820
7300
7740
8160
8930
10300
11500
12600
13600
14600
15500
16300
A
220
410
661
1113
1517
1892
2265
2636
2999
3368
3737
4105
4842
6297
7770
9222
10704
12195
-
80
46
1662.1
B
255
481
788
1344
1854
2327
2800
3273
3746
4219
4692
5165
6111
8003
9895
11788
13680
15572
16518
-
C
25 & 32
18
254.5
A
B
C
34
39 1770
63
74 2510
101
121 3390
170
206 4800
232
284 5880
290
356 6790
347
429 7590
404
501 8310
459
574 8980
516
646 9600
572
718 10200
629
791 10700
741
936 11800
964 1225 13600
1190 1515 15200
1412 1805 16600
1639 2095 18000
1867 2384 19200
- 2674 20400
- 2964 21500
C
11600
16400
22200
31300
38400
44300
49600
54300
58600
62700
66500
70100
76800
88700
99100
109000
117000
125000
129000
-
A
375
697
1125
1893
2581
3218
3853
4485
5102
5730
6358
6984
8237
10714
13218
15690
18211
20748
-
A
55
102
165
278
379
473
566
659
750
842
934
1026
1210
1574
1942
2306
2676
3049
-
100
60
2827.8
B
431
819
1341
2287
3153
3958
4763
5568
6373
7177
7982
8787
10397
13616
16835
20055
23274
-
40
23
415.5
B
63
120
197
336
463
582
700
818
936
1055
1173
1291
1528
2001
2474
2947
3420
3893
4366
4839
C
2890
4090
5540
7840
9600
11100
12400
13600
14700
15700
16600
17500
19200
22200
24800
27100
29300
31300
33200
35000
C
19700
27800
37700
53300
65300
75400
84300
92400
99800
107000
113000
119000
131000
151000
169000
185000
200000
-
A
88
163
263
442
603
752
900
1048
1192
1339
1485
1632
1924
2503
3088
3665
4254
4847
-
A
570
1060
1711
2880
3926
4895
5861
6823
7761
8717
9671
10624
12530
16296
20107
23866
-
50
29
660.6
B
101
191
313
534
737
925
1113
1301
1489
1677
1865
2053
2429
3181
3933
4685
5437
6189
6941
7693
125
74
4300.7
B
660
1245
2039
3478
4797
6021
7245
8469
9694
10918
12142
13366
15815
20711
25608
30505
35402
40299
-
C
4600
6510
8810
12500
15300
17600
19700
21600
23300
24900
26400
27900
30500
35200
39400
43200
46600
49800
52900
55700
C
30000
42400
57400
81100
99300
115000
128000
140000
152000
162000
172000
181000
199000
229000
257000
281000
304000
324000
-
Edition 2016-01
herose.com
89
Safety Valves
Type 06127
Safety Valves, angle type, stainless steel
type tested, TÜV-SV.577. S/G/L
Standard safety valve
metal to metal seated, with lifting device,
closed bonnet
Flanged connection acc. to DIN EN 1092-1 PN40
Part No. 06127.X.0000
Available options - on request only:
· Disc with soft sealing
· Extended pressure and temperature ranges
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -270°C / -454°F (3K) up to +450°C / +842°F (723K)
Materials
1 Body
2 Disc
3 Stem
4 Spring
5 Bonnet
6 Lifting device
DIN EN
1.4408
1.4404
1.4404
1.4310
1.4408
1.4408
ASME/ASTM
A 351 CF 8M
A 276 Grade 316L
A 276 Grade 316L
A 313 Grade 301
A 351 CF 8M
A 351 CF 8M
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06127
Nominal size
Orifice
Dimension code
Set pressure
Flange diameter
Height
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
DN
15
20
25
32
40
50
65
80
100
d0
12
18
18
18
23
29
37
46
60
.X.
0150
0200
0250
0320
0400
0500
0650
0800
1000
bar
0.2-40 0.2-40 0.2-40 0.2-40 0.2-40 0.2-40 0.2-26 0.2-25 0.2-22
D
95
105
115
140
150
165
185
200
235
H
310
315
320
325
335
360
475
530
605
L1
90
95
100
105
115
125
145
155
175
L2
90
95
100
105
115
125
145
155
175
ca. kg
5.0
6.0
6.0
8.0
9.0
12.0
15.0
20.0
33.0
αw
0.62
0.29
0.38
0.38
0.38
0.38
0.38
0.38
0.38
αw
0.48
0.19
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Dimensions in mm.
Edition 2016-01
90
Phone: +49 4531 509-0
Safety Valves
Type 06127
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
24.0
28.0
32.0
34.0
36.0
40.0
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
22.0
24.0
26.0
A
55
78
125
168
210
251
293
333
374
415
456
538
699
863
1024
1189
1354
-
15
12
113.1
B
67
93
151
206
258
311
363
416
468
521
573
679
889
1099
1309
1519
1729
1834
1939
2149
A
142
265
428
720
981
1224
1465
1706
1940
2179
2418
2656
3132
4074
5027
5489
5967
6445
C
A
2140
30
2900
67
4100
129
5020
177
5790
221
6480
265
7090
308
7660
350
8190
394
8690
437
9160
480
10000
566
11600
736
13000
908
14200 1078
15300 1251
16400 1425
16900
17400
18300
-
65
37
1075.3
B
165
311
510
870
1199
1505
1811
2117
2423
2729
3035
3342
3954
5178
6402
7014
7626
8238
C
7500
10600
14300
20300
24800
28700
32100
35100
37900
40600
43000
45300
49700
57400
64100
67300
70200
73100
20
18
254.5
B
35
80
156
217
272
327
382
438
493
548
604
714
935
1156
1377
1599
1820
1930
2041
2262
C
1900
2580
3650
4470
5160
5770
6320
6820
7300
7740
8160
8930
10300
11500
12600
13600
14600
15000
15500
16300
A
220
410
661
1113
1517
1892
2265
2636
2999
3368
3737
4105
4842
6297
7770
8484
9222
-
25 & 32
18
254.5
A
B
C
34
39 1770
63
74 2510
101
121 3390
170
206 4800
232
284 5880
290
356 6790
347
429 7590
404
501 8310
459
574 8980
516
646 9600
572
718 10200
629
791 10700
741
936 11800
964 1225 13600
1190 1515 15200
1412 1805 16600
1639 2095 18000
1867 2384 19200
- 2529 19800
- 2674 20400
- 2964 21500
80
46
1662.1
B
C
255 11600
481 16400
788 22200
1344 31300
1854 38400
2327 44300
2800 49600
3273 54300
3746 58600
4219 62700
4692 66500
5165 70100
6111 76800
8003 88700
9895 99100
10842 104000
11788 109000
-
A
375
697
1125
1893
2581
3218
3853
4485
5102
5730
6358
6984
8237
10714
13218
14434
-
A
55
102
165
278
379
473
566
659
750
842
934
1026
1210
1574
1942
2306
2676
3049
-
40
23
415.5
B
63
120
197
336
463
582
700
818
936
1055
1173
1291
1528
2001
2474
2947
3420
3893
4130
4366
4839
100
60
2827.8
B
431
819
1341
2287
3153
3958
4763
5568
6373
7177
7982
8787
10397
13616
16835
18445
-
C
2890
4090
5540
7840
9600
11100
12400
13600
14700
15700
16600
17500
19200
22200
24800
27100
29300
31300
32300
33200
35000
A
88
163
263
442
603
752
900
1048
1192
1339
1485
1632
1924
2503
3088
3665
4254
4847
-
50
29
660.6
B
101
191
313
534
737
925
1113
1301
1489
1677
1865
2053
2429
3181
3933
4685
5437
6189
6565
6941
7693
C
4600
6510
8810
12500
15300
17600
19700
21600
23300
24900
26400
27900
30500
35200
39400
43200
46600
49800
51400
52900
55700
C
19700
27800
37700
53300
65300
75400
84300
92400
99800
107000
113000
119000
131000
151000
169000
177000
-
Edition 2016-01
herose.com
91
Safety Valves
Type 06340, Type 06341
Safety Valves, angle type, cast iron, type tested, TÜV-SV.576. S/G/L
Full lift safety valve
Standard safety valve for fluids
metal to metal seated, with lifting device,
with enlarged outlet
Flanged connection acc. to DIN EN 1092-1 PN16
Part No. 06340.X.0000
open bonnet
Part No. 06341.X.0000
closed bonnet
Available options - on request only:
· Disc with soft sealing
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -10°C / +14°F (263K) up to +200°C / +392°F (473K)
with spring in special steel up to +300°C / +572°F (573K)
Materials
1 Body
2 Seat
3 Disc
4 Stem
5 Spring
6 Bonnet
7 Lifting device
DIN EN
0.6025
1.4404
1.4122
1.4021
1.1200
0.7040
0.7040
ASME/ASTM
A 48-83 Gr. 35B
A 276 Grade 316L
no reference
A 276 Grade 420
A 227
A 536-87 Gr. 60-40-18
A 536-87 Gr. 60-40-18
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 06340, 06341
Nominal size
Outlet
Orifice
Dimension code
Set pressure range
Flange diameter
Flange diameter
Height Type 06340
Height Type 06341
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
32
40
50
65
80
100
125
150
DN
25
DN
40
50
65
80
100
125
150
200
250
d0
23
29
37
46
60
74
92
98
125
.X.
0250
0320
0400
0500
0650
0800
1000
1250
1500
bar
0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16 0.2-16
DE
115
140
150
165
185
200
220
250
285
DA
150
165
185
200
220
250
285
340
405
H
338
440
506
563
696
798
880
910
1020
H
339
446
512
569
702
801
883
913
1020
L1
100
110
115
120
140
160
180
200
225
L2
105
115
140
150
170
195
220
250
285
ca. kg
9.0
12.0
16.0
22.0
32.0
56.0
75.0
85.0 131.0
αw
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
αw
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
Dimensions in mm.
Edition 2016-01
92
Phone: +49 4531 509-0
Safety Valves
Type 06340, Type 06341
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
A
140
224
326
519
699
871
1043
1214
1381
1551
1721
1891
2230
2562
2900
25
23
415.5
B
C
162 5210
263 7370
388 9970
627 14100
854 17300
1071 19900
1289 22300
1507 24400
1725 26400
1943 28200
2161 29900
2379 31500
2814 34600
3250 37300
3686 39900
A
1451
2316
3370
5371
7232
9018
10796
12568
14297
16057
17815
19571
23081
26518
30020
80
74
4301.4
B
1680
2721
4017
6487
8836
11091
13346
15601
17857
20112
22367
24622
29132
33642
38153
A
223
356
518
825
1111
1385
1658
1930
2196
2466
2736
3006
3545
4073
4610
C
53900
76300
103000
146000
179000
206000
231000
253000
273000
292000
310000
326000
358000
386000
413000
32
29
660.6
B
258
418
617
996
1357
1703
2050
2396
2742
3089
3435
3781
4474
5167
5859
C
8280
11700
15900
22400
27500
31700
35500
38800
42000
44800
47600
50100
54900
59300
63400
A
2243
3580
5209
8302
11178
13938
16687
19426
22098
24818
27535
30250
35675
40987
46400
A
363
579
843
1343
1808
2254
2699
3142
3574
4014
4454
4893
5770
6629
7505
100
92
6648.5
B
2597
4206
6209
10026
13657
17143
20629
24114
27600
31086
34571
38057
45028
52000
58971
40
37
1075.3
B
C
420 13500
680 19100
1004 25800
1622 36500
2209 44700
2773 51600
3337 57700
3900 63200
4464 68300
5028 73000
5592 77400
6155 81600
7283 89400
8411 96600
9538 103000
C
83300
118000
160000
226000
276000
319000
357000
391000
422000
451000
479000
505000
553000
597000
638000
A
2545
4062
5910
9420
12683
15816
18934
22042
25074
28161
31244
34324
40480
46507
52650
A
561
895
1302
2075
2794
3485
4172
4856
5525
6205
6884
7562
8919
10247
11600
125
98
7543.9
B
2947
4772
7045
11377
15497
19462
23407
27362
31317
35273
39228
43183
51093
59003
66914
50
46
1662.1
B
C
649 20800
1051 29500
1552 39900
2507 56400
3414 69100
4286 79800
5157 89200
6029 97700
6900 106000
7771 113000
8643 120000
9514 126000
11257 138000
13000 149000
14743 160000
C
94600
134000
181000
256000
314000
362000
405000
444000
479000
512000
543000
573000
627000
678000
724000
A
954
1523
2215
3531
4754
5928
7097
8262
9399
10556
11712
12866
15174
17433
19735
A
4140
6609
9616
15326
20635
25731
30804
35861
40794
45816
50831
55842
65858
75664
85657
65
60
2827.8
B
C
1105 35500
1789 50100
2641 67900
4265 96000
5809 118000
7291 136000
8774 152000
10257 166000
11739 180000
13222 192000
14704 204000
16187 215000
19152 235000
22117 254000
25082 272000
150
125
12273.4
B
C
4794 154000
7764 218000
11461 295000
18509 417000
25212 510000
31647 589000
38082 659000
44516 722000
50951 779000
57386 833000
63821 884000
70255 932000
83125 1021000
95994 1102000
108863 1178000
Edition 2016-01
herose.com
93
Safety Valves
Type 06345, Type 06346
Safety Valves, angle type, cast steel, type tested, TÜV-SV.576. S/G/L
Full lift safety valve
Standard safety valve for fluids
metal to metal seated, with lifting device,
with enlarged outlet
Inlet: Flanged connection acc. to DIN EN 1092-1 PN40
Outlet: Flanged connection acc. to DIN EN 1092-1 PN16
Part No. 06345.X.0000
open bonnet
Part No. 06346.X.0000
closed bonnet
Available options - on request only:
· Disc with soft sealing · Extended pressure and temperature ranges
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -85°C / -121°F (188K) up to +450°C / +842°F (723K)
Materials
1 Body
2 Seat
3 Disc
4 Stem
5 Spring
6 Bonnet
7 Lifting device
DIN EN
1.0619
1.4404
1.4122
1.4021
1.1200
1.0619
0.7040
ASME/ASTM
A 216 Grade WCB
A 276 Grade 316L
no reference
A 276 Grade 420
A 227
A 216 Grade WCB
A 536-87 Gr. 60-40-18
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Type 06345, 06346
Nominal size
Outlet
Orifice
Dimension code
Set pressure saturated steam
Set pressure air and fluids
Flange diameter
Flange diameter
Height Type 06345
Height Type 06346
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
DN
25
32
40
50
65
80
100
125
150
DN
40
50
65
80
100
125
150
200
250
d0
23
29
37
46
60
74
92
98
125
.X.
0250
0320
0400
0500
0650
0800
1000
1250
1500
bar
0.2-32 0.2-32 0.2-32 0.2-32 0.2-32 0.2-32 0.2-32 0.2-24 0.2-16
bar
0.2-40 0.2-40 0.2-40 0.2-40 0.2-40 0.2-40 0.2-40 0.2-28 0.2-25
DE
115
140
150
165
185
200
220
250
285
DA
150
165
185
200
220
250
285
340
405
H
338
440
506
563
696
798
880
910
1020
H
339
446
512
569
702
801
883
913
1020
L1
100
110
115
120
140
160
180
200
225
L2
105
115
140
150
170
195
220
250
285
ca. kg
9.0
12.0
16.0
22.0
32.0
56.0
75.0
85.0 131.0
αw
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
αw
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
Dimensions in mm.
Edition 2016-01
94
Phone: +49 4531 509-0
Safety Valves
Type 06345, Type 06346
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
24.0
28.0
32.0
34.0
36.0
40.0
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
24.0
28.0
32.0
34.0
36.0
40.0
A
140
224
326
519
699
871
1043
1214
1381
1551
1721
1891
2230
2900
3578
4247
4930
5616
5945
6290
6985
25
32
23
29
415.5
660.6
B
C
A
B
C
A
162 5210 223 258 8280 363
263 7370 356 418 11700 579
388 9970 518 617 15900 843
627 14100 825 996 22400 1343
854 17300 1111 1357 27500 1808
1071 19900 1385 1703 31700 2254
1289 22300 1658 2050 35500 2699
1507 24400 1930 2396 38800 3142
1725 26400 2196 2742 42000 3574
1943 28200 2466 3089 44800 4014
2161 29900 2736 3435 47600 4454
2379 31500 3006 3781 50100 4893
2814 34600 3545 4474 54900 5770
3686 39900 4610 5859 63400 7505
4557 44600 5688 7245 70900 9260
5429 48900 6752 8630 77700 10991
6300 52800 7837 10016 83900 12757
7171 56400 8929 11401 89700 14534
7607 58200 9451 12094 92500 15384
8043 59800 10000 12786 95100 16278
8914 63100 11104 14172 100000 18076
A
1451
2316
3370
5371
7232
9018
10796
12568
14297
16057
17815
19571
23081
30020
37039
43964
51029
58137
61537
65112
72303
80
74
4301.4
B
1680
2721
4017
6487
8836
11091
13346
15601
17857
20112
22367
24622
29132
38153
47173
56194
65214
74235
78745
83255
92276
C
A
53900
2243
76300
3580
103000
5209
146000
8302
179000 11178
206000 13938
231000 16687
253000 19426
273000 22098
292000 24818
310000 27535
326000 30250
358000 35675
413000 46400
462000 57249
506000 67953
546000 78873
584000 89860
602000 95115
619000 100641
653000 111756
100
92
6648.5
B
2597
4206
6209
10026
13657
17143
20629
24114
27600
31086
34571
38057
45028
58971
72913
86856
100799
114741
121713
128684
142626
40
37
1075.3
B
C
420 13500
680 19100
1004 25800
1622 36500
2209 44700
2773 51600
3337 57700
3900 63200
4464 68300
5028 73000
5592 77400
6155 81600
7283 89400
9538 103000
11793 115000
14048 126000
16304 137000
18559 146000
19686 151000
20814 155000
23059 163000
C
83300
118000
160000
226000
276000
319000
357000
391000
422000
451000
479000
505000
553000
638000
714000
782000
844000
-
A
2545
4062
5910
9420
12683
15816
18934
22042
25074
28161
31244
34324
40480
52650
64960
77106
89496
-
A
561
895
1302
2075
2794
3485
4172
4856
5525
6205
6884
7562
8919
11600
14312
16988
19718
22465
23779
25160
27939
125
98
7543.9
B
2947
4772
7045
11377
15497
19462
23407
27362
31317
35273
39228
43183
51093
66914
82734
98555
114375
-
50
46
1662.1
B
C
649 20800
1051 29500
1552 39900
2507 56400
3414 69100
4286 79800
5157 89200
6029 97700
6900 106000
7771 113000
8643 120000
9514 126000
11257 138000
14743 160000
18228 178000
21714 195000
25200 211000
28685 226000
30428 233000
32171 239000
35657 252000
A
954
1523
2215
3531
4754
5928
7097
8262
9399
10556
11712
12866
15174
19735
24350
28903
33547
38220
40455
42806
47533
C
A
94600
4140
134000
6609
181000
9616
256000 15326
314000 20635
362000 25731
405000 30804
444000 35861
479000 40794
512000 45816
543000 50831
573000 55842
627000 65858
724000 85657
810000 105685
887000 125445
958000
-
65
60
2827.8
B
C
1105 35500
1789 50100
2641 67900
4265 96000
5809 118000
7291 136000
8774 152000
10257 166000
11739 180000
13222 192000
14704 204000
16187 215000
19152 235000
25082 272000
31012 304000
36943 333000
42873 359000
48803 384000
51768 396000
54733 407000
60663 429000
150
125
12273.4
B
C
4794 154000
7764 218000
11461 295000
18509 417000
25212 510000
31647 589000
38082 659000
44516 722000
50951 779000
57386 833000
63821 884000
70255 932000
83125 1021000
108863 1178000
134602 1317000
160341 1443000
-
Edition 2016-01
herose.com
95
Safety Valves
Type 06347
Safety Valves, angle type, stainless steel
type tested, TÜV-SV.576. S/G/L
Full lift safety valve
Standard safety valve for fluids
metal to metal seated, with lifting device,
closed bonnet, with enlarged outlet
Inlet: Flanged connection acc. to DIN EN 1092-1 PN40
Outlet: Flanged connection acc. to DIN EN 1092-1 PN16
Part No. 06347.X.0000
Available options - on request only:
· Disc with soft sealing
· Extended pressure and temperature ranges
Applications:
Provided as safety device for protection against excessive pressure
in pressure vessels.
Approved for gases, vapours and fluids.
Working temperatures: -270°C / -454°F (3K) up to +400°C / +752°F (673K)
Materials
1 Body
2 Seat
3 Disc
4 Stem
5 Spring
6 Bonnet
7 Lifting device
DIN EN
1.4408
1.4404
1.4404
1.4404
1.4310
1.4408
1.4408
ASME/ASTM
A 351 CF 8M
A 276 Grade 316L
A 276 Grade 316L
A 276 Grade 316L
A 313 Grade 301
A 351 CF 8M
A 351 CF 8M
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Marking acc. to ASME Code Section VIII.
Type 06347
Nominal size
Outlet
Orifice
Dimension code
Set pressure saturated steam
Set pressure air and fluids
Flange diameter
Flange diameter
Height
Length
Length
Weight
Coeff. of discharge gases, vapours
Coeff. of discharge fluids
Technical data
32
40
50
65
80
100
125
150
DN
25
DN
40
50
65
80
100
125
150
200
250
d0
23
29
37
46
60
74
92
98
125
.X.
0250
0320
0400
0500
0650
0800
1000
1250
1500
bar
0.2-32 0.2-32 0.2-32 0.2-32 0.2-28 0.2-25 0.2-26 0.2-24 0.2-10
bar
0.2-40 0.2-40 0.2-40 0.2-37 0.2-28 0.2-25 0.2-26 0.2-24 0.2-10
DE
115
140
150
165
185
200
220
250
285
DA
150
165
185
200
220
250
285
340
405
H
339
446
512
569
702
801
883
913
1020
L1
100
110
115
120
140
160
180
200
225
L2
105
115
140
150
170
195
220
250
285
ca. kg
9.0
12.0
16.0
22.0
32.0
56.0
75.0
85.0 131.0
αw
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
αw
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
Dimensions in mm.
Edition 2016-01
96
Phone: +49 4531 509-0
Safety Valves
Type 06347
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
24.0
28.0
32.0
34.0
36.0
40.0
DN
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
16.0
20.0
24.0
26.0
A
140
224
326
519
699
871
1043
1214
1381
1551
1721
1891
2230
2900
3578
4247
4930
5616
5945
6290
6985
25
32
23
29
415.5
660.6
B
C
A
B
C
A
162 5210 223 258 8280 363
263 7370 356 418 11700 579
388 9970 518 617 15900 843
627 14100 825 996 22400 1343
854 17300 1111 1357 27500 1808
1071 19900 1385 1703 31700 2254
1289 22300 1658 2050 35500 2699
1507 24400 1930 2396 38800 3142
1725 26400 2196 2742 42000 3574
1943 28200 2466 3089 44800 4014
2161 29900 2736 3435 47600 4454
2379 31500 3006 3781 50100 4893
2814 34600 3545 4474 54900 5770
3686 39900 4610 5859 63400 7505
4557 44600 5688 7245 70900 9260
5429 48900 6752 8630 77700 10991
6300 52800 7837 10016 83900 12757
7171 56400 8929 11401 89700 14534
7607 58200 9451 12094 92500 15384
8043 59800 10000 12786 95100 16278
8914 63100 11104 14172 100000 18076
A
1451
2316
3370
5371
7232
9018
10796
12568
14297
16057
17815
19571
23081
30020
37039
43964
-
80
74
4301.4
B
1680
2721
4017
6487
8836
11091
13346
15601
17857
20112
22367
24622
29132
38153
47173
56194
-
C
53900
76300
103000
146000
179000
206000
231000
253000
273000
292000
310000
326000
358000
413000
462000
506000
-
A
2243
3580
5209
8302
11178
13938
16687
19426
22098
24818
27535
30250
35675
46400
57249
67953
73405
100
92
6648.5
B
2597
4206
6209
10026
13657
17143
20629
24114
27600
31086
34571
38057
45028
58971
72913
86856
93827
40
37
1075.3
B
C
420 13500
680 19100
1004 25800
1622 36500
2209 44700
2773 51600
3337 57700
3900 63200
4464 68300
5028 73000
5592 77400
6155 81600
7283 89400
9538 103000
11793 115000
14048 126000
16304 137000
18559 146000
19686 151000
20814 155000
23059 163000
C
83300
118000
160000
226000
276000
319000
357000
391000
422000
451000
479000
505000
553000
638000
714000
782000
814000
A
2545
4062
5910
9420
12683
15816
18934
22042
25074
28161
31244
34324
40480
52650
64960
77106
-
A
561
895
1302
2075
2794
3485
4172
4856
5525
6205
6884
7562
8919
11600
14312
16988
19718
22465
23779
25160
-
125
98
7543.9
B
2947
4772
7045
11377
15497
19462
23407
27362
31317
35273
39228
43183
51093
66914
82734
98555
-
50
46
1662.1
B
C
649 20800
1051 29500
1552 39900
2507 56400
3414 69100
4286 79800
5157 89200
6029 97700
6900 106000
7771 113000
8643 120000
9514 126000
11257 138000
14743 160000
18228 178000
21714 195000
25200 211000
28685 226000
30428 233000
32171 239000
-
C
94600
134000
181000
256000
314000
362000
405000
444000
479000
512000
543000
573000
627000
724000
810000
887000
-
A
954
1523
2215
3531
4754
5928
7097
8262
9399
10556
11712
12866
15174
19735
24350
28903
33547
-
65
60
2827.8
B
C
1105 35500
1789 50100
2641 67900
4265 96000
5809 118000
7291 136000
8774 152000
10257 166000
11739 180000
13222 192000
14704 204000
16187 215000
19152 235000
25082 272000
31012 304000
36943 333000
42873 359000
-
150
125
12273.4
A
B
4140
4794
6609
7764
9616 11461
15326 18509
20635 25212
25731 31647
30804 38082
35861 44516
40794 50951
45816 57386
50831 63821
55842 70255
-
C
154000
218000
295000
417000
510000
589000
659000
722000
779000
833000
884000
932000
-
Edition 2016-01
herose.com
97
Overflow Valves
Type 50051.0012
Overflow valve, angle type, brass
Overflow valve
with EPDM valve seal for vapours and gases,
closed bonnet,
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 50051.0012.0000
Applications:
Provided as overflow valve for protection against excessive pressure in pipe systems and pressure
vessels, which are not subject to approval.
Working temperature: -10°C / +14°F (263K) up to +65°C / +149°F (338K)
Materials
1 Body
2 Valve seal
3 Disc
4 Spring
5 Bonnet
6 Adjusting screw
7 Plug
8 Adapter 3/8''
DIN EN
CW614N
EPDM
CW614N
1.1200
CW614N
CW614N
CW614N
CW614N
ASTM
B 249 UNS C38500
B 249 UNS C38500
A 227
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Not to use as equipment with safety function acc. to
Pressure Equipment Directive 97/23/EC (PED)
(No CE marking).
Typ 50051.0012
Nominal size
Orifice
Set pressure range
Outlet
Height
Length
Length
Length
Wrench size across flats
Wrench size across flats
Weight
Technical Data
GW
1/4
d0
7
bar
0.7-2.0
GA
3/8
H
62
L1
28.5
L2
13
A1
10
S1
27
S2
19
ca. kg
0.16
Abmessungen in mm.
Edition 2016-01
98
Phone: +49 4531 509-0
Overflow Valves
Type 50051.0012
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Saturated steam in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
Set
pressure
in bar (g)
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
GW
d0 (mm)
A0 (mm2 )
Medium
1/4
7.0
38.48
Luft
7.0
7.7
8.1
8.7
9.4
9.9
10.4
11.0
11.3
11.8
12.1
12.5
12.9
13.2
Edition 2016-01
herose.com
99
Overflow Valves
Type 06195
Overflow Valve, angle type, bronze,
not type tested
with soft valve seal, closed bonnet,
In- and Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06195.X.0000
with NBR valve seal
Working temperature: -10°C / +14°F (263K) up to +110°C / +230°F (383K)
Part No. 06195.X.0700
with FPM valve seal
Working temperature: -10°C / +14°F (263K) up to +165°C / +329°F (438K)
Available options - on request only:
· stainless steel spring - material 1.4571
· external parts nickel plated
Applications:
Provided as overflow valve for protection against excessive pressure in pipe systems and
pressure vessels, which are not subject to approval.
Materials
1 Body
2 Disc nut
3 Plate
4 Valve seal
5 Disc
6 Stem
7 Bonnet
8 Spring
9 Cap
DIN EN
ASTM
CC491K B 62 UNS C83600
CW614N B 249 UNS C38500
CW507L B 36 UNS C26800
NBR or FPM
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.1200
A 227
CW614N B 249 UNS C38500
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Not to use as equipment with safety function acc. to
Pressure Equipment Directive 97/23/EC (PED)
(CE marking only from size 1-1/4).
Type 06195
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Weight
Technical data
GW
1/2
d0
12
.X.
0400
bar
0.5-25
GA
1/2
H
90
L1
25
L2
20
S1
27
ca. kg
0.21
3/4
15
0600
0.2-20
3/4
110
30
25
32
0.36
1
18
1000
0.5-16
1
130
36
30
41
0.65
1-1/4
20
1200
0.5-16
1-1/4
150
40
35
50
0.95
1-1/2
24
1400
0.2-16
1-1/2
170
48
40
58
1.5
2
28
2000
0.2-16
2
195
56
48
70
2.25
Dimensions in mm.
Edition 2016-01
100
Phone: +49 4531 509-0
Overflow Valves
Type 06195
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Water in kg/h at 20 °C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
1/2
12.0
113.1
3/4
15.0
176.7
47
68
113
156
196
236
276
316
357
398
439
519
599
680
760
849
930
1052
40
63
89
139
192
241
291
340
389
440
489
540
638
737
836
935
1044
-
1
18.0
254.5
Air
117
172
284
389
488
589
689
788
891
990
1093
1293
1493
1693
-
1-1/4
20.0
314.2
1-1/2
24.0
452.4
2
28.0
615.8
1/2
12.0
113.1
3/4
15.0
176.7
158
230
386
527
661
797
932
1067
1205
1340
1479
1750
2020
2291
-
123
208
306
505
692
869
1048
1225
1402
1584
1761
1943
2298
2654
3010
-
159
277
407
660
906
1137
1371
1603
1835
2073
2305
2543
3008
3474
3940
-
1025
1389
1964
2405
2778
3105
3402
3675
3928
4167
4392
4811
5197
5556
5893
6211
6515
6945
1330
1881
2547
3603
4412
5095
5697
6240
6740
7206
7643
8056
8825
9533
10191
10809
11394
-
1
1-1/4
18.0
20.0
254.5
314.2
Water
3111
4832
4212
6542
5957
9252
7296 11332
8424 13085
9419 14629
10318 16025
11145 17310
11914 18505
12637 19627
13320 20689
14592 22664
15761 24480
16849 26170
17871
18838
19757
21062
-
1-1/2
24.0
452.4
2
28.0
615.8
5298
7493
10146
14348
17573
20292
22687
24852
26843
28697
30438
32084
35146
37962
40584
-
6525
9227
12494
17670
21641
24989
27938
30605
33057
35340
37483
39511
43282
46750
49978
-
Edition 2016-01
herose.com
101
Overflow Valves
Type 06196
Overflow Valve, angle type, bronze,
not type tested
with PTFE valve seal, closed bonnet,
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06196.X.0000
Available options - on request only:
· stainless steel spring - material 1.4571
· external parts nickel plated
Applications:
Provided as overflow valve for protection against excessive pressure in pipe systems and
pressure vessels, which are not subject to approval.
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Materials
1 Body
2 Valve seal
3 Disc
4 Stem
5 Bonnet
6 Spring
7 Cap
DIN EN
CC491K
PTFE
CW614N
CW614N
CW614N
1.1200
CW614N
ASTM
B 62 UNS C83600
B 249 UNS C38500
B 249 UNS C38500
B 249 UNS C38500
A 227
B 249 UNS C38500
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Not to use as equipment with safety function acc. to
Pressure Equipment Directive 97/23/EC (PED)
(CE marking only from size 1-1/4).
Type 06196
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Length
Length
Wrench size across flats
Weight
Technical data
GW
1/2
d0
12
.X.
0400
bar
0.2-25
GA
1/2
H
90
L1
25
L2
20
S1
27
ca. kg
0.21
3/4
15
0600
0.2-20
3/4
110
30
25
32
0.36
1
18
1000
0.2-20
1
130
36
30
41
0.65
1-1/4
1-1/2
20
24
1200
1400
0.4-16 0.2-23.5
1-1/4
1-1/2
150
170
40
48
35
40
50
58
0.95
1.5
2
28
2000
0.2-16
2
195
56
48
70
2.25
Dimensions in mm.
Edition 2016-01
102
Phone: +49 4531 509-0
Overflow Valves
Type 06196
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
Water in kg/h at 20 °C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.2
0.4
0.5
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
23.5
25.0
1/2
12.0
113.1
3/4
15.0
176.7
28
43
48
68
113
156
196
236
276
316
357
398
439
519
599
680
760
849
930
991
1052
40
58
63
89
139
192
241
291
340
389
440
489
540
638
737
836
935
1044
-
1
18.0
254.5
Air
69
108
117
172
284
389
488
589
689
788
891
990
1093
1293
1493
1693
1893
2113
-
1-1/4
20.0
314.2
1-1/2
24.0
452.4
2
28.0
615.8
1/2
12.0
113.1
3/4
15.0
176.7
142
158
230
391
527
661
797
932
1067
1205
1340
1479
1750
2020
2291
-
122
188
207
306
505
691
867
1043
1220
1396
1572
1748
1925
2277
2629
2982
3334
3687
4039
4304
-
159
250
277
407
660
906
1137
1371
1603
1835
2073
2305
2543
3008
3474
3940
-
725
936
1025
1389
1964
2405
2778
3105
3402
3675
3928
4167
4392
4811
5197
5556
5893
6211
6515
6733
6945
1330
1717
1881
2547
3603
4412
5095
5697
6240
6740
7206
7643
8056
8825
9533
10191
10809
11394
-
1
1-1/4
18.0
20.0
254.5
314.2
Water
2199
2840
4411
3111
4832
4212
6542
5957
9252
7296 11332
8424 13085
9419 14629
10318 16025
11145 17310
11914 18505
12637 19627
13320 20689
14592 22689
15761 24480
16849 26170
17871
18838
-
1-1/2
24.0
452.4
2
28.0
615.8
5298
6840
7493
10146
14348
17573
20292
22687
24852
26843
28697
30438
32084
35146
37962
40584
43045
45374
47589
49184
-
6525
8423
9227
12494
17670
21641
24989
27938
30605
33057
35340
37483
39511
43282
46750
49978
-
Edition 2016-01
herose.com
103
Overflow Valves
Type 06198
Overflow Valve, angle type, bronze,
not type tested
with adjusting device,
with soft valve seal, closed bonnet,
In- and outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06198.X.0000
with PTFE valve seal
Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Part No. 06198.X.0700
with FPM valve seal
Working temperature: -10°C / +14°F (263K) up to +165°C / +329°F (438K)
Available options - on request only:
· other spring ranges acc. to customer specification
· stainless steel spring - material 1.4571
· external parts nickel plated
Applications:
Provided as overflow valve for protection against excessive pressure in pipe systems and
pressure vessels, which are not subject to approval.
Materials
1 Body
2 Disc nut
3 Plate
4 Valve seal
5 Disc
6 Stem
7 Bonnet
8 Spring
9 Cap
10 Nut
11 Adjusting screw
12 Closing cap
DIN EN
ASTM
CC491K B 62 UNS C83600
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
PTFE or FPM
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
1.1200
A 227
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
CW614N B 249 UNS C38500
Important: Adjusting ranges of springs are marked with
a label on the bonnet.
Not to use as equipment with safety function acc. to
Pressure Equipment Directive 97/23/EC (PED)
(No CE marking).
Type 06198
Nominal size
Orifice
Dimension code
Set pressure PTFE valve seal
Set pressure FPM valve seal
Outlet
Height
Length
Length
Wrench size across flats
Weight
Technical data
GW
1/2
d0
12
.X.
0400
bar
12.0-25
bar
0.8-25
GA
1/2
H
113
L1
25
L2
20
S1
27
ca. kg
0.30
3/4
15
0600
2.0-25
5.0-12
3/4
145
30
25
32
0.55
1
18
1000
2.0-25
5.0-12
1
165
36
30
41
0.85
(1-1/4. 1-1/2 & 2 in preparation)
1-1/4
1-1/2
2
20
24
28
1200
1400
2000
-
Dimensions in mm.
Edition 2016-01
104
Phone: +49 4531 509-0
Overflow Valves
Type 06198
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
Air in m3 /h at 0°C and 1013.25 mbar
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.8
1.0
1.5
1.99
2.0
3.0
3.99
4.0
4.99
5.0
6.0
7.0
8.0
9.0
10.0
11.99
12.0
14.0
16.0
18.0
19.99
20.0
22.0
22.99
23.0
25.0
GW
Part No. spring
Material 1.1200
55341.0091.2780
55341.0092.2780
55341.0152.1780
55341.0193.2780
55341.0194.1780
55341.0078.0780
55341.0104.1780
55341.0196.1780
55341.0217.0780
55341.0199.1780
GW
Part No. spring
Material 1.4571
55345.0117.1767
55345.0119.1767
55345.0234.1767
55345.0236.1767
1/2
12.0
113.1
3/4
15.0
176.7
24
26
33
40
37
50
63
53
64
64
75
86
97
108
119
141
169
195
222
248
274
274
300
313
313
340
46
62
77
77
93
70
82
94
106
118
129
153
119
138
156
175
193
193
212
221
221
240
1/2
1
1-1/4
18.0
20.0
254.5
314.2
Air
13
28
45
45
68
68
93
128
161
197
245
335
335
397
460
527
597
446
489
502
502
553
-
3/4
1
1-1/2
24.0
452.4
2
28.0
615.8
-
-
1-1/4
1-1/2
2
Pressure range of springs in bar
0.8-1.99
2.0-3.99
4.0-11.99
12.0-25.0
2.0-4.99
- 5.0-11.99
- 12.0-22.99
- 23.0-25.0
1/2
3/4
2.0-19.99
20.0-25.0
-
-
-
1
1-1/4
1-1/2
2
-
-
Pressure range of springs in bar
-
2.0-3.99
4.0-9.99
- 10.0-15.99
- 16.0-25.0
-
Edition 2016-01
herose.com
105
Overflow Valves
Type 06321
Overflow Valve, angle type, ductile casting GGG-40.3,
not type tested
metal to metal seated, closed bonnet,
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06321.X.0000
with lifting device - head A
Part No. 06321.X.0020
with gastight cap - head C
Available options - on request only:
· Disc with soft sealing (EPDM, FKM, PTFE)
Applications:
Provided as overflow valve for protection against excessive pressure in pipe
systems and pressure vessels, which are not subject to approval.
Working temperatures: -10°C / +14°F (263K) up to +280°C / +536°F (553K)
Materials
1 Body + Bonnet
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Lifting cap
7 Lifting stem
8 Lever
9 Cap
DIN EN
0.7043
1.4104
1.4571
1.4104
1.4310
1.4104
1.4305
3.2581
1.0718
ASTM
A 395
A 276 Grade 430F
A 276 Grade 316Ti
A 276 Grade 430F
A 313 Grade 301
A 276 Grade 430F
A 276 Grade 303
no reference
A 108
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Not to use as equipment with safety function acc. to
Pressure Equipment Directive 97/23/EC (PED)
(No CE marking).
Type 06321
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Height
Length
Length
Length
Wrench size across flats
Weight
Technical data
GW
3/8
3/8
1/2
3/4
3/4
d0
8
10
12.5
8
12.5
1003
1204
0806
1206
.X.
0803
bar
50-200 0.1-140 0.1-120 50-200 50-170
GA
1/2
1/2
1/2
1
1
H1
200
200
200
200
230
H2
185
185
185
185
215
L1
40
40
40
40
50
L2
34
34
34
34
40
A1
12
12
14
16
16
S1
32
32
32
32
41
ca. kg
1.0
1.0
1.0
1.0
1.6
3/4
1
16
12.5
1606
1210
0.1-90 50-170
1
1
230
230
215
215
50
50
40
40
16
18
41
41
1.6
1.6
1
1-1/4
1-1/2
16
22
27
1610
2212
2714
0.1-90 0.05-55 0.05-45
1
1
1
230
230
230
215
215
215
50
50
50
40
40
40
18
20
20
41
41
41
1.6
1.8
1.8
Dimensions in mm.
Edition 2016-01
106
Phone: +49 4531 509-0
Overflow Valves
Type 06321
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
120.0
140.0
160.0
180.0
200.0
3/8 & 3/4
8
50.3
A
B
103
141
124
169
147
197
167
225
189
252
212
280
259
335
309
390
367
443
434
496
517
547
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.05
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
40.0
45.0
50.0
55.0
1-1/4
22
380.2
B
6.1
8.8
19.4
34.6
58.5
83.2
104
145
187
229
437
647
857
963
1070
1175
A
16.0
27.3
45.6
64.3
79.8
110
141
171
323
475
628
705
783
861
C
904
990
1070
1140
1210
1280
1400
1510
1610
1710
1810
C
216
305
611
966
1370
1670
1930
2370
2730
3050
4320
5290
6110
6480
6830
7160
A
3.3
5.6
9.4
13.3
16.5
22.8
29.2
35.4
66.8
114
130
162
194
229
261
295
331
404
484
-
A
24.1
41.1
68.7
96.8
120
166
212
258
487
716
946
1060
-
3/8
10
78.5
B
1.8
4.0
7.1
12.1
17.2
21.5
30.1
38.7
47.3
90.4
134
177
221
264
308
351
395
438
524
609
-
1-1/2
27
572.6
B
9.2
13.3
29.2
52.1
88.2
125
156
219
282
344
659
975
1290
1450
-
C
63
126
200
282
346
399
489
565
631
893
1090
1260
1410
1550
1670
1780
1890
2000
2190
2360
-
1/2. 3/4 & 1
12.5
122.7
A
B
2.9
5.2
6.3
8.9
11.2
14.5
18.6
20.7
26.9
25.7
33.6
35.7
47.0
45.6
60.4
55.4
73.9
104
141
153
209
203
277
253
345
303
413
358
481
408
549
462
617
517
684
632
819
756
951
896
1080
-
C
99
197
312
441
540
624
764
882
987
1390
1710
1970
2200
2420
2610
2790
2960
3120
3420
3690
3950
-
A
8.3
14.1
23.7
34.0
42.2
58.8
74.7
90.8
171
251
332
414
497
587
668
756
-
3/4 & 1
16
201.1
B
4.6
10.1
17.9
30.4
44.0
55.0
77.0
99.0
121
231
342
453
565
676
788
899
1010
-
C
161
323
511
723
885
1020
1250
1440
1610
2280
2800
3230
3610
3960
4280
4570
4850
-
C
325
460
921
1450
2060
2520
2910
3560
4120
4600
6510
7970
9210
9770
-
Edition 2016-01
herose.com
107
Overflow Valves
Type 06322
Overflow Valve, angle type, stainless steel,
not type tested
metal to metal seated, closed bonnet,
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06322.X.0000
with lifting device - head A
Part No. 06322.X.0020
with gastight cap - head C
Applications:
Provided as overflow valve for protection against excessive pressure in pipe
systems and pressure vessels, which are not subject to approval.
Working temperatures: -60°C / -76°F (213K) up to +280°C / +536°F (553K)
Materials
1 Body + Bonnet
2 Inlet body
3 Disc
4 Stem
5 Spring
6 Lifting cap
7 Lifting stem
8 Lever
9 Cap
DIN EN
1.4581
1.4571
1.4571
1.4571
1.4310
1.4581
1.4305
3.2581
1.4581
ASTM
A 351 CF 10MC
A 276 Grade 316Ti
A 276 Grade 316Ti
A 276 Grade 316Ti
A 313 Grade 301
A 351 CF 10MC
A 276 Grade 303
no reference
A 351 CF 10MC
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Not to use as equipment with safety function acc. to
Pressure Equipment Directive 97/23/EC (PED)
(No CE marking).
Type 06322
Nominal size
Orifice
Dimension code
Set pressure range
Outlet
Height
Height
Length
Length
Length
Wrench size across flats
Weight
Technical data
GW
3/8
3/8
1/2
3/4
3/4
d0
8
10
12.5
8
12.5
1003
1204
0806
1206
.X.
0803
bar
50-250 0.1-140 0.1-120 50-250 50-170
GA
1/2
1/2
1/2
1
1
H1
200
200
200
200
230
H2
185
185
185
185
215
L1
40
40
40
40
50
L2
34
34
34
34
40
A1
12
12
14
16
16
S1
32
32
32
32
41
ca. kg
1.0
1.0
1.0
1.0
1.6
3/4
1
16
12.5
1606
1210
0.1-90 50-170
1
1
230
230
215
215
50
50
40
40
16
18
41
41
1.6
1.6
1
1-1/4
1-1/2
16
22
27
1610
2212
2714
0.1-90 0.05-55 0.05-45
1
1
1
230
230
230
215
215
215
50
50
50
40
40
40
18
20
20
41
41
41
1.6
1.8
1.8
Dimensions in mm.
Edition 2016-01
108
Phone: +49 4531 509-0
Overflow Valves
Type 06322
Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2
Medium:
A = Saturated steam in kg/h
B = Air in m3 /h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C
The capacity indicated below is for a fully opened valve.
d0 - orifice
A0 - flow area
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
120.0
140.0
160.0
180.0
200.0
220.0
240.0
250.0
3/8 & 3/4
8
50.3
A
B
103
141
124
169
147
197
167
225
189
252
212
280
259
335
309
390
367
443
434
496
517
547
598
648
672
GW
Set
d0 (mm)
pressure
2
in bar (g) A0 (mm )
Medium
0.05
0.1
0.4
1.0
2.0
3.0
4.0
6.0
8.0
10.0
20.0
30.0
40.0
45.0
50.0
55.0
1-1/4
22
380.2
B
6.1
8.8
19.4
34.6
58.5
83.2
104
145
187
229
437
647
857
963
1070
1175
A
16.0
27.3
45.6
64.3
79.8
110
141
171
323
475
628
705
783
861
C
904
990
1070
1140
1210
1280
1400
1510
1610
1710
1810
1890
1980
2020
C
216
305
611
966
1370
1670
1930
2370
2730
3050
4320
5290
6110
6480
6830
7160
A
3.3
5.6
9.4
13.3
16.5
22.8
29.2
35.4
66.8
114
130
162
194
229
261
295
331
404
484
-
A
24.1
41.1
68.7
96.8
120
166
212
258
487
716
946
1060
-
3/8
10
78.5
B
1.8
4.0
7.1
12.1
17.2
21.5
30.1
38.7
47.3
90.4
134
177
221
264
308
351
395
438
524
609
-
1-1/2
27
572.6
B
9.2
13.3
29.2
52.1
88.2
125
156
219
282
344
659
975
1290
1450
-
C
63
126
200
282
346
399
489
565
631
893
1090
1260
1410
1550
1670
1780
1890
2000
2190
2360
-
1/2. 3/4 & 1
12.5
122.7
A
B
2.9
5.2
6.3
8.9
11.2
14.5
18.6
20.7
26.9
25.7
33.6
35.7
47.0
45.6
60.4
55.4
73.9
104
141
153
209
203
277
253
345
303
413
358
481
408
549
462
617
517
684
632
819
756
951
896
1080
-
C
99
197
312
441
540
624
764
882
987
1390
1710
1970
2200
2420
2610
2790
2960
3120
3420
3690
3950
-
A
8.3
14.1
23.7
34.0
42.2
58.8
74.7
90.8
171
251
332
414
497
587
668
756
-
3/4 & 1
16
201.1
B
4.6
10.1
17.9
30.4
44.0
55.0
77.0
99.0
121
231
342
453
565
676
788
899
1010
-
C
161
323
511
723
885
1020
1250
1440
1610
2280
2800
3230
3610
3960
4280
4570
4850
-
C
325
460
921
1450
2060
2520
2910
3560
4120
4600
6510
7970
9210
9770
-
Edition 2016-01
herose.com
109
Edition 2016-01
110
Phone: +49 4531 509-0
DIN EN Valves for Industrial Use
Safe standards with a multitude of applications: DIN EN valves made of gunmetal/brass
Edition 2016-01
herose.com
111
Globe Valves
Type 01021
Globe Valves, PN16, DIN 3844
Bronze body, screwed topwork in brass
Part No. 01021.X.0000
Part No. 01021.X.5000 Globe/Check Valve
Female thread connection (G) acc. to ISO 7-1 Rp
Available options - on request only:
· Handwheel in plasic DIN 388-1
· Valve with safety plate in brass
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Valve seal
3 Disc
4 Headpiece
5 Stem
6 Handwheel
7 Spring
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
PTFE
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
1.4310
A 313 Grade 301
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 01021
Nominal size
Dimension code
Face-to-face dimension
Height
Socket depth
Handwheel-Ø
Wrench size across flats
Wrench size across flats
Weight
Technical data
GW
1/4
.X.
0200
FF
50
H
75
a
9
B
40
S1
22
S2
4.5
ca. kg
0.25
3/8
0300
50
75
10
40
22
4.5
0.25
1/2
0400
60
85
13
50
27
5
0.3
3/4
0600
70
95
14
60
32
6
0.43
1
1000
80
105
17
70
41
7
0.7
1-1/4
1200
95
120
19
80
50
8
1.0
1-1/2
1400
105
130
19
90
58
9
1.3
2
2000
130
145
23
110
70
9
2.1
Dimensions in mm.
Edition 2016-01
112
Phone: +49 4531 509-0
Globe Valves
Type 03021
Globe Valves, PN16
Bronze body, screwed topwork in brass
Part No. 03021.X.0160
Part No. 03021.X.5160 Globe/Check Valve
Flanged connection acc. to DIN EN 1092-1 PN16
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Valve seal
3 Disc
4 Headpiece
5 Stem
6 Handwheel
7 Spring
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
PTFE
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
1.4310
A 313 Grade 301
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 03021
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Technical data
DN
20
.X.
0200
FF
80
H
95
D
105
b
12
B
60
S2
6
ca. kg
1.9
25
0250
90
105
115
12
70
7
2.5
32
0320
95
120
140
14
80
8
3.8
40
0400
110
130
150
14
90
9
4.4
50
0500
125
145
165
16
110
9
6.5
Dimensions in mm.
Edition 2016-01
herose.com
113
Globe Valves
Type 03050
Globe Valves, PN16, DIN 86 260-A
Bronze body and topwork
metal to metal seated
Part No. 03050.X.0160
Flanged connection acc. to DIN EN 1092-1 PN16
face-to-face dimension acc. to DIN EN 558-1, Reihe 1
Available options - on request only:
· Disc with PTFE seal
· Valve with control disc (tapered design) and PTFE seal
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Materials
1 Body
2 Disc
3 Headpiece
4 Stem
5 Handwheel
Essential:
DIN EN
CC491K
CC491K
CC491K
CW710R
cast iron
ASTM
B 62 UNS C83600
B 62 UNS C83600
B 62 UNS C83600
no reference
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 03050
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Technical data
DN
25
.X.
0250
FF
160
H
210
D
115
b
12
B
100
S2
9
ca. kg
6.0
32
0320
180
220
140
14
125
11
8.0
40
0400
200
250
150
14
150
12
10.0
50
0500
230
250
165
16
150
12
12.0
65
0650
290
315
185
16
185
14
17.0
80
0800
310
335
200
18
200
17
23.0
100
1000
350
375
220
20
200
17
30.0
125
1250
400
420
250
20
225
19
50.0
150
1500
480
460
285
22
250
22
65.0
Dimensions in mm.
Edition 2016-01
114
Phone: +49 4531 509-0
Globe Valves
Type 03080
Globe Valves, PN16, DIN 3356-1
Body and topwork in cast iron
seat and disc in stainless steel, metal to metal seated
Part No. 03080.X.0000
Flanged connection acc. to DIN EN 1092-1 PN16
face-to-face dimension acc. to DIN EN 558-1, Reihe 1
Available options - on request only:
· Angled Valves
· Valve with control disc
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Materials
1 Body
2 Disc
3 Headpiece
4 Stem
5 Handwheel
Essential:
DIN EN
0.6025
1.4021
0.6025
1.4021
cast iron
ASTM
A 48-83 Gr. 35B
A 276 grade 420
A 48-83 Gr. 35B
A 276 grade 420
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 03080
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Technical data
DN
15
.X.
0150
FF
130
H
180
D
95
b
12
B
120
S2
10
ca. kg
3.5
20
0200
150
180
105
12
120
10
4.0
25
0250
160
190
115
12
140
12
5.0
32
0320
180
190
140
14
140
12
6.8
40
0400
200
225
150
14
160
13
9.3
50
0500
230
235
165
16
160
13
11.7
65
0650
290
265
185
16
180
14
16.0
80
0800
310
290
200
18
200
15
23.5
100
1000
350
345
220
20
225
17
35.0
125
1250
400
375
250
20
250
18
52.0
150
1500
480
465
285
22
300
21
75.5
Dimensions in mm.
Edition 2016-01
herose.com
115
Globe Valves
Type 03090
Globe Valves, PN40, DIN 3356-1
Body and topwork in cast steel
seat and disc in stainless steel, metal to metal seated
Part No. 03090.X.0000
Flanged connection acc. to DIN EN 1092-1 PN40
face-to-face dimension acc. to DIN EN 558-1, Reihe 1
Available options - on request only:
· Angled Valves
· Valve with control disc
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures: -10°C / +14°F (263K) up to +400°C / +752°F (673K)
Materials
1 Body
2 Disc
3 Headpiece
4 Stem
5 Handwheel
Essential:
DIN EN
1.0619
1.4021
1.0619
1.4021
cast iron
ASTM
A 216 Grade WCB
A 276 grade 420
A 216 Grade WCB
A 276 grade 420
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 03090
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Technical data
DN
15
.X.
0150
FF
130
H
190
D
95
b
12
B
120
S2
10
ca. kg
4.4
20
0200
150
190
105
12
120
10
5.4
25
0250
160
205
115
12
140
12
6.3
32
0320
180
205
140
14
140
12
7.0
40
0400
200
245
150
14
160
13
10.5
50
0500
230
255
165
16
160
13
13.8
65
0650
290
295
185
16
180
14
21.0
80
0800
310
325
200
18
200
15
27.5
100
1000
350
380
235
20
225
17
40.0
125
1250
400
425
270
20
250
18
61.0
150
1500
480
520
300
22
300
21
88.5
Dimensions in mm.
Edition 2016-01
116
Phone: +49 4531 509-0
Gate Valves
Type 09010
Gate Valves, PN16, DIN EN 12288
Bronze body, screwed topwork in brass
with gland packing and non rising stem
Part No. 09010.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +150°C / +302°F (423K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +200°C / +392°F (473K)
Materials
1 Body
2 Wedge
3 Stem
4 Headpiece
5 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
CC491K B 62 UNS C83600
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 09010
Nominal size
Dimension code
Face-to-face dimension
Height
Socket depth
Flow diameter
Handwheel-Ø
Wrench size across flats
Wrench size across flats
Weight
Technical data
GW
1/2
.X.
0400
FF
55
H
85
a
15.0
d0
12.0
B
60
S1
27
S2
6
ca. kg
0.36
3/4
0600
60
105
16.3
17.5
70
32
7
0.54
1
1000
68
115
19.1
23.2
70
41
8
0.82
1-1/4
1200
76
130
21.4
29.0
80
50
9
1.10
1-1/2
1400
80
150
21.4
36.0
90
58
9
1.60
2
2000
93
180
25.7
47.0
110
70
11
2.40
Dimensions in mm.
Edition 2016-01
herose.com
117
Gate Valves
Type 09012
Gate Valves, PN16, DIN EN 12288
Bronze body, screwed topwork in brass
with maintenance-free gland packing (O-Ring)
and non rising stem
Part No. 09012.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +180°C / +356°F (453K)
Materials
1 Body
2 Wedge
3 Stem
4 Headpiece
5 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
CC491K B 62 UNS C83600
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 09012
Nominal size
Dimension code
Face-to-face dimension
Height
Socket depth
Flow diameter
Handwheel-Ø
Wrench size across flats
Wrench size across flats
Weight
Technical data
GW
1/2
.X.
0400
FF
55
H
85
a
15.0
d0
12.0
B
60
S1
27
S2
6
ca. kg
0.36
3/4
0600
60
105
16.3
17.5
70
32
7
0.54
1
1000
68
115
19.1
23.2
70
41
8
0.82
1-1/4
1200
76
130
21.4
29.0
80
50
9
1.10
1-1/2
1400
80
150
21.4
36.0
90
58
9
1.60
2
2000
93
180
25.7
47.0
110
70
11
2.40
Dimensions in mm.
Edition 2016-01
118
Phone: +49 4531 509-0
Gate Valves
Type 09061
Gate Valves, PN16, DIN EN 12288
Bronze body, screwed topwork in brass
with gland packing and non rising stem
Part No. 09061.X.0160
Flanged connection acc. to DIN EN 1092-1 PN16
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +150°C / +302°F (423K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +200°C / +392°F (473K)
Materials
1 Body
2 Wedge
3 Stem
4 Headpiece
5 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
CC491K B 62 UNS C83600
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 09061
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Technical data
DN
20
.X.
0200
FF
75
H
105
D
105
b
12
B
70
S2
7
ca. kg
1.8
25
0250
80
115
115
12
70
8
2.3
32
0320
90
130
140
14
80
9
3.6
40
0400
100
150
150
14
80
9
4.6
50
0500
110
180
165
16
110
11
6.4
65
0650
130
220
185
16
150
12
9.4
80
0800
150
250
200
18
160
13
12.1
Dimensions in mm.
Edition 2016-01
herose.com
119
Gate Valves
Type 09420
Flanged Gate Valves, PN16, DIN EN 12288
Bronze body, screwed topwork in brass
with maintenance-free gland packing (O-Ring)
and non rising stem
flanged connection acc. to DIN EN 1092-3 PN16
option:
Locking device →
Part No. 09420.X.000000
· Standard valve
Part No. 09420.X.010000
· Valve with locking device without lock
Part No. 09420.X.020000
· Valve with locking device with lock
Applications:
Suitable for transformer oil.
Working temperatures: -25°C / -13°F (248K) up to +120°C / +248°F (393K) and maximal 6.0 bar
Materials
1 Body
2 Wedge
3 Stem
4 Bonnet gasket
5 Headpiece
6 O-Rings
7 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
CC491K B 62 UNS C83600
CW614N B 249 UNS C38500
Klingersil C-4400
CW614N B 249 UNS C38500
FPM (Viton)
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 09420
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Technical data
DN
25
.X.
0250
FF
80
H
120
D
115
b
12
B
70
S2
8
ca. kg
2.6
32
0320
90
130
140
14
80
9
3.6
40
0400
100
150
150
14
80
9
4.4
50
0500
110
180
165
16
110
11
6.5
65
0650
130
225
185
16
150
12
9.2
80
0800
150
250
200
18
150
14
12.1
100
1000
165
300
220
20
150
14
15.8
Dimensions in mm.
Edition 2016-01
120
Phone: +49 4531 509-0
Gate Valves
Type 09420
Flanged Gate Valves, PN16, DIN EN 12288
Bronze body, screwed topwork in brass
with maintenance-free gland packing (O-Ring)
and non rising stem
flanged connection acc. to DIN EN 1092-3 PN16
option:
Locking device →
Part No. 09420.X.100000
· Valve with opening indicator
Part No. 09420.X.110000
· Valve with opening indicator and locking device without lock
Part No. 09420.X.120000
· Valve with opening indicator and locking device with lock
Applications:
Suitable for transformer oil.
Working temperatures: -25°C / -13°F (248K) up to +120°C / +248°F (393K) and maximal 6.0 bar
Materials
1 Body
2 Wedge
3 Stem
4 Bonnet gasket
5 Headpiece
6 O-Rings
7 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
CC491K B 62 UNS C83600
CW614N B 249 UNS C38500
Klingersil C-4400
CW614N B 249 UNS C38500
FPM (Viton)
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 09420
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Technical data
DN
25
.X.
0250
FF
80
H
138
D
115
b
12
B
70
S2
8
ca. kg
2.7
32
0320
90
152
140
14
80
9
3.7
40
0400
100
169
150
14
80
9
4.9
50
0500
110
208
165
16
110
11
6.7
65
0650
130
253
185
16
150
12
9.4
80
0800
150
281
200
18
150
14
12.5
100
1000
165
318
220
20
150
14
16.2
Dimensions in mm.
Edition 2016-01
herose.com
121
Angle Valves
Type 01131
Globe Valves, angle type, PN16
Bronze body, screwed topwork in brass
Part No. 01131.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Available options - on request only:
· external parts nickel plated
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures: -10°C / +14°F (263K) up to +185°C / +365°F (458K)
Materials
1 Body
2 Valve seal
3 Disc
4 Headpiece
5 Stem
6 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
PTFE
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 01131
Nominal size
Dimension code
Face-to-face dimension
Length
Height
Socket depth
Thread size
Hanwheel-Ø
Wrench size across flats
Wrench size across flats
Weight
Technical data
GW
1/2
.X.
0400
FF
25
L
25
H
95
a
12
GA
1/2
B
70
S1
27
S2
7
ca. kg
0.4
3/4
0600
37.5
35
110
19
3/4
70
32
8
0.6
1
1000
42.5
36
135
19
1
80
41
9
1.0
1-1/2
1400
48
48
155
18
1-1/2
80
58
8
1.6
2
2000
56
56
190
20
2
80
70
9
2.5
Dimensions in mm.
Edition 2016-01
122
Phone: +49 4531 509-0
Needle Valves
Type 04010
Needle Valves, PN40
Brass body and topwork
with needle cone
Part No. 04010.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures: -10°C / +14°F (263K) up to +100°C / +212°F (373K)
Materials
1 Body
2 Headpiece
3 Stem
4 Handwheel
Essential:
DIN EN
CW614N
CW612N
CW612N
Plasic
ASTM
B 249 UNS C38500
B 283 UNS C37700
B 283 UNS C37700
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 04010
Nominal size
Dimension code
Face-to-face dimension
Height
Flow diameter
Handwheel-Ø
Wrench size across flats
Weight
Technical data
GW
1/4
.X.
0200
FF
50
H
80
d0
5.0
B
50
S1
22
ca. kg
0.30
3/8
0300
50
80
6.0
50
22
0.30
1/2
0400
50
80
6.5
65
25
0.35
3/4
0600
67
90
9.0
65
32
0.55
1
1000
75
95
11.0
65
40
0.75
1-1/4
1200
110
105
13.0
90
54
1.80
Dimensions in mm.
Edition 2016-01
herose.com
123
Self closing globe Valves
Type 01028
Self closing Globe Valve, PN16
Bronze body and lever,
gland with FPM O-Rings
Part No. 01028.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures: -10°C / +14°F (263K) up to +165°C / +329°F (438K)
Pay attention to pressure-temperature reduction.
Materials
1 Body
2 Valve seal
3 Disc
4 Plug
5 Stem
6 Lever
7 Spring
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
FPM (VITON)
CW612N B 283 UNS C37700
CW612N B 283 UNS C37700
1.4104
A 276 Grade 430F
CC491K B 62 UNS C83600
1.4310
A 313 Grade 301
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Type 01028
Nominal size
Dimension code
Face-to-face dimension
Height
Height
Socket depth
Length
Wrench size across flats
Weight
Technical data
GW
1/2
.X.
0400
FF
70
H1
120
H2
50
a
12
b
123
S1
27
ca. kg
0.8
3/4
0600
80
120
55
14
123
33
0.9
1
1000
95
130
60
16
123
41
1.4
Dimensions in mm.
Edition 2016-01
124
Phone: +49 4531 509-0
Control Valves
Type 04020
Control Valves, PN16, DIN 3844
Control characteristic: linear
Bronze body, screwed topwork in brass
with opening indicator
Part No. 04020.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Valve seal
3 Control disc
4 Headpiece
5 Stem
6 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
PTFE
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 04020
Nominal size
Dimension code
Face-to-face dimension
Height
Socket depth
Handwheel-Ø
Wrench size across flats
Wrench size across flats
Weight
Kvs-Value
Technical data
GW
3/8
.X.
0300
FF
50
H
75
a
10
B
40
S1
22
S2
4.5
ca. kg
0.35
m3 /h
1.5
1/2
0400
60
85
13
50
27
5
0.4
2.0
3/4
0600
70
95
14
60
32
6
0.5
4.0
1
1000
80
105
17
70
41
7
0.7
6.0
1-1/4
1200
95
120
19
80
50
8
1.1
12.0
1-1/2
1400
105
130
19
90
58
9
1.4
16.0
2
2000
130
145
23
110
70
9
2.3
25.0
Dimensions in mm.
Edition 2016-01
herose.com
125
Control Valves
Type 04041
Control Valves, PN16
Control characteristic: linear
Bronze body, screwed topwork in brass
with opening indicator
Part No. 04041.X.0160
Flanged connection acc. to DIN EN 1092-1 PN16
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14 (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Valve seal
3 Control disc
4 Headpiece
5 Stem
6 Handwheel
Essential:
DIN EN
ASTM
CC491K B 62 UNS C83600
PTFE
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
CW614N B 283 UNS C38500
Aluminium - diecasting
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 04041
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Handwheel-Ø
Wrench size across flats
Weight
Kvs-Value
Technical data
DN
15
.X.
0150
FF
65
H
85
D
95
b
10
B
50
S2
5
ca. kg
1,4
m3 /h
2,0
20
0200
80
95
105
12
60
6
2,0
4,0
25
0250
90
105
115
12
70
7
2,6
6,0
32
0320
95
120
140
14
80
8
3,9
12,0
40
0400
110
130
150
14
90
9
4,5
16,0
50
0500
125
145
165
16
110
9
6,6
25,0
Dimensions in mm.
Edition 2016-01
126
Phone: +49 4531 509-0
Check Valves
Type 05011, Type 05012
Check Valves, PN16, DIN EN 3845-2
Bronze body, screwed cap in brass
Part No. 05011.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Disc with FPM seal
Part No. 05012.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Disc with PTFE seal
Available options - on request only:
· Disc with EPDM seal
· Disc with NBR seal
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Seal Type 05011
2 Seal Type 05012
3 Disc
4 Spring
5 Guide piece
6 Cap
Essential:
DIN EN
CC491K
FPM
PTFE
CW614N
1.4310
CW614N
CW614N
ASTM
B 62 UNS C83600
B 283 UNS C38500
A 313 Grade 301
B 283 UNS C38500
B 283 UNS C38500
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 05011 & 05012
Nominal size
Dimension code
Face-to-face dimension
Height
Socket depth
Wrench size across flats
Weight
Technical data
GW
3/8
.X.
0300
FF
50
H
40
a
10
S1
22
ca. kg
0.2
1/2
0400
60
40
13
27
0.3
3/4
0600
70
50
14
32
0.4
1
1000
80
55
17
41
0.6
1-1/4
1200
95
55
19
50
0.9
1-1/2
1400
105
65
19
58
1.3
2
2000
130
75
23
70
2.0
Dimensions in mm.
Edition 2016-01
herose.com
127
Check Valves
Type 05083
Check Valves, PN16
Bronze body, screwed cap in brass
Part No. 05083.X.0160
Flanged connection acc. to DIN EN 1092-1 PN16
Disc with FPM seal
Available options - on request only:
· Disc with PTFE seal
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Valve seal
3 Disc
4 Spring
5 Guide piece
6 Cap
Essential:
DIN EN
CC491K
FPM
CW614N
1.4310
CW614N
CW614N
ASTM
B 62 UNS C83600
B 283 UNS C38500
A 313 Grade 301
B 283 UNS C38500
B 283 UNS C38500
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 05083
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Width of flange
Weight
Technical data
DN
20
.X.
0200
FF
80
H
50
D
105
b
12
ca. kg
1.9
25
0250
90
55
115
12
2.6
32
0320
95
55
140
14
3.7
40
0400
110
65
150
14
4.3
50
0500
125
75
165
16
6.4
Dimensions in mm.
Edition 2016-01
128
Phone: +49 4531 509-0
Check Valves
Type 05082
Check Valves, PN16
Bronze body and cap
metal to metal seated
Part No. 05082.X.0160
Flanged connection acc. to DIN EN 1092-1 PN16
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Disc
3 Spring
4 Cap
Essential:
DIN EN
CC491K
CC491K
1.4310
CC491K
ASTM
B 62 UNS C83600
B 62 UNS C83600
A 313 Grade 301
B 62 UNS C83600
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 05082
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Weight
Technical data
DN
20
.X.
0200
FF
150
H
70
D
105
ca. kg
4.0
25
0250
160
75
115
5.0
32
0320
180
80
140
6.0
40
0400
200
90
150
8.5
50
0500
230
100
165
11.0
65
0650
290
110
185
15.0
80
0800
310
130
200
20.0
100
1000
350
150
220
25.0
125
1250
400
170
250
40.0
150
1500
480
190
285
55.0
Dimensions in mm.
Edition 2016-01
herose.com
129
Check Valves
Type 05110
Check Valves, PN16
Body and cap in cast iron
seat and disc in stainless steel, metal to metal seated
Part No. 05110.X.0000
Flanged connection acc. to DIN EN 1092-1 PN16
face-to-face dimension acc. to DIN EN 558-1, Reihe 1
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 13.0 bar: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
Materials
1 Body
2 Disc
3 Spring
4 Cap
Essential:
DIN EN
0.6025
1.4021
1.4310
0.6025
ASTM
A 48-83 Gr. 35B
A 276 Grade 420
A 313 Grade 301
A 48-83 Gr. 35B
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 05110
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Weight
Technical data
DN
15
.X.
0150
FF
130
H
70
D
95
ca. kg
2.4
20
0200
150
70
105
3.0
25
0250
160
80
115
3.8
32
0320
180
80
140
5.7
40
0400
200
85
150
7.4
50
0500
230
95
165
10.3
65
0650
290
110
185
15.2
80
0800
310
130
200
20.4
100
1000
350
155
235
31.0
125
1250
400
165
270
49.0
150
1500
480
215
300
69.0
Dimensions in mm.
Edition 2016-01
130
Phone: +49 4531 509-0
Check Valves
Type 05115
Check Valves, PN40
Body in cast steel
seat and disc in stainless steel, metal to metal seated
Part No. 05115.X.0000
Flanged connection acc. to DIN EN 1092-1 PN40
face-to-face dimension acc. to DIN EN 558-1, Reihe 1
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 40.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 33.0 bar: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
up to max. 21.0 bar: -10°C / +14°F (263K) up to +400°C / +752°F (673K)
Materials
1 Body
2 Disc
3 Spring
4 Cap DN15 - 65
5 Cap DN80 - 150
Essential:
DIN EN
1.0619
1.4021
1.4310
1.0402
1.0425
ASTM
A 216 Grade WCB
A 276 Grade 420
A 313 Grade 301
A 576 Grade 1020
no reference
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 05115
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Weight
Technical data
DN
15
.X.
0150
FF
130
H
70
D
95
ca. kg
3.8
20
0200
150
70
105
4.9
25
0250
160
80
115
5.9
32
0320
180
80
140
7.1
40
0400
200
85
150
10.4
50
0500
230
95
165
12.3
65
0650
290
110
185
22.7
80
0800
310
130
200
28.5
100
1000
350
155
235
40.0
125
1250
400
165
270
64.0
150
1500
480
215
300
90.0
Dimensions in mm.
Edition 2016-01
herose.com
131
Check Valves
Type 05040
Check Valves, swing type, PN16
Bronze body, screwed cap in brass
Female thread connection (G) acc. to ISO 7-1 Rp
Part-No. 05040.X.0000
Metal to metal seated
Part-No. 05040.X.0200
Disc with silicone seal
Part-No. 05040.X.0600
Disc with EPDM seal
Part-No. 05040.X.0700
Disc with FPM seal
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +80°C / +176°F (353K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
Materials
1 Body
2 Swing
3 Cap
Essential:
DIN EN
CC491K
CW614N
CW614N
ASTM
B 62 UNS C83600
B 283 UNS C38500
B 283 UNS C38500
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 05040
Nominal size
Dimension code
Face-to-face dimension
Height
Flow diameter
Socket depth
Wrench size across flats
Weight
Kvs-Value
Technical data
GW
1/2
.X.
0400
FF
60
H
40
d0
13
a
12
S1
27
ca. kg
0.28
m3 /h
5.5
3/4
0600
70
49
17
13
34
0.45
10.2
1
1000
80
56
22
15
41
0.70
20.2
1-1/4
1200
95
60
28
16
51
0.96
34.7
1-1/2
1400
105
70
31
18
55
1.40
44.9
2
2000
130
80
46
20
70
2.10
104.0
2-1/2
2400
160
105
60
20
90
3.70
175.0
Dimensions in mm.
Edition 2016-01
132
Phone: +49 4531 509-0
Check Valves
Type 05338
Check Valves, disc type, PN40 / class 300
Body in stainless steel
Part No. 05338.X.0000
Metal to metal seated
with closing spring,
for mounting between two flanges acc. to
DIN PN10, PN16, PN25 or PN40
ASME class 125, class 150 or class 300
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 49.6 bar: -200°C / -328°F (73K)
up to max: 35.8 bar: +200°C / +392°F (473K)
up to max. 24.0 bar: +550°C / +1022°F (823K)
Materials
1 Body
2 Spring cap
3 Spring
4 Disc
Essential:
DIN EN
1.4408
1.4571
1.4571
1.4571
ASTM
A 351 CF 8M
A 276 Grade 316Ti
A 313 Grade 316Ti
A 276 Grade 316Ti
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 05338
Nominal size
Dimension code
Face-to-face dimension
Disc diameter
Disc diameter
Weight
Kvs-Value
Cv-Value
Technical data
DN
15
.X.
0150
FF
16
Dmin
44
Dmax
67
ca. kg
0.27
m3 /h
2.7
gal/min
3.1
20
0200
19
53
76
0.38
5.8
6.7
25
0250
22
64
82
0.52
10.3
11.9
32
0320
28
70
93
0.80
17.8
20.6
40
0400
31.5
83
104
1.12
27.0
31.3
50
0500
40
96
118
1.78
42.0
48.7
65
0650
46
110
136
2.43
68.0
78.9
80
0800
50
128
158
3.37
88.0
102.1
100
1000
60
151
186
5.34
112.0
129.9
Dimensions in mm.
Edition 2016-01
herose.com
133
Pressure reducing Valves
Type 08010
Pressure Reducing Valves
Bronze body, with balanced seat,
disc with NBR seal, pressure gauge connection G1/4,
inlet pressure: up to max. 25.0 bar
outlet pressure: 1.5 up to 8.0 bar
greatest reducing ratio: 10 : 1
Part No. 08010.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for compressed air, nitrogen and similar non-inflammable, non-toxic gases.
Working temperature: -10°C / +14°F (263K) up to +75°C / +167°F (348K)
Materials
1 Body
2 Bonnet (GW 1/4 - 1)
2 Bonnet (GW 1-1/4 - 2)
3 Spring
Essential:
DIN EN
CC491K
CW614N
0.6025
1.1200
Picture:
Accessory pressure gauge - not
included with valve
ASTM
B 62 UNS C83600
B 249 UNS C38500
A 48-83 Gr. 35B
A 227
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08010
Nominal size
Dimension code
Face-to-face dimension
Height
Height
Weight
Technical data
GW
1/4
.X.
0200
FF
70
H1
48
H2
110
ca. kg
0.85
3/8
0300
70
48
110
0.85
1/2
0400
85
48
120
1.10
3/4
0600
85
48
120
1.10
1
1000
95
55
155
1.60
1-1/4
1200
104
61
200
3.60
1-1/2
1400
108
61
200
3.65
2
2000
147
64
260
7.00
Dimensions in mm.
Edition 2016-01
134
Phone: +49 4531 509-0
Pressure reducing Valves
Type 08011
Pressure Reducing Valves
Bronze body, with balanced seat,
disc with NBR seal, pressure gauge connection G1/4,
with piston control
inlet pressure: up to max. 40.0 bar
outlet pressure: 1.5 up to 20.0 bar
greatest reducing ratio: 6 : 1
Part No. 08011.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for compressed air, nitrogen and similar non-inflammable, non-toxic gases.
Working temperature: -10°C / +14°F (263K) up to +75°C / +167°F (348K)
Materials
1 Body
2 Bonnet (GW 1/4 - 1)
2 Bonnet (GW 1-1/4 - 2)
3 Spring
Essential:
DIN EN
CC491K
CW614N
0.6025
1.1200
ASTM
B 62 UNS C83600
B 249 UNS C38500
A 48-83 Gr. 35B
A 227
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08011
Nominal size
Dimension code
Face-to-face dimension
Height
Height
Weight
Technical data
GW
1/4
.X.
0200
FF
70
H1
48
H2
130
ca. kg
1.20
3/8
0300
70
48
130
1.15
1/2
0400
85
48
140
1.70
3/4
0600
85
48
140
1.70
1
1000
95
55
185
2.65
1-1/4
1200
104
61
230
5.95
1-1/2
1400
108
61
230
6.10
2
2000
147
64
295
9.80
Dimensions in mm.
Edition 2016-01
herose.com
135
Pressure reducing Valves
Type 08012
Pressure Reducing Valves
Bronze body, with balanced seat,
disc with NBR seal, pressure gauge connection G1/4,
inlet pressure: up to max. 25.0 bar
outlet pressure: 0.2 up to 2.0 bar
greatest reducing ratio: 20 : 1
Part No. 08012.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for compressed air, nitrogen and similar non-inflammable, non-toxic gases.
Working temperature: -10°C / +14°F (263K) up to +75°C / +167°F (348K)
Materials
1 Body
2 Bonnet (GW 1/4 - 1)
2 Bonnet (GW 1-1/4 - 2)
3 Spring
Essential:
DIN EN
CC491K
CW614N
CC491K
1.1200
Picture:
Accessory pressure gauge - not
included with valve
ASTM
B 62 UNS C83600
B 249 UNS C38500
B 62 UNS C83600
A 227
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08012
Nominal size
Dimension code
Face-to-face dimension
Height
Height
Weight
Technical data
GW
1/4
.X.
0200
FF
70
H1
47
H2
155
ca. kg
1.0
3/8
0300
70
47
155
1.0
1/2
0400
85
47
220
2.65
3/4
0600
85
47
220
2.65
1
1000
95
55
250
4.2
1-1/4
1200
104
60
300
7.75
1-1/2
1400
108
60
300
12.0
2
2000
147
66
300
13.1
Dimensions in mm.
Edition 2016-01
136
Phone: +49 4531 509-0
Pressure reducing Valves
Type 08015
Pressure Reducing Valves
Bronze body, with balanced seat,
disc with NBR seal, pressure gauge connection G1/4,
inlet pressure: up to max. 40.0 bar
outlet pressure: 1.0 up to 10.0 bar
Part No. 08015.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for compressed air, nitrogen and similar non-inflammable, non-toxic gases.
Working temperature: -10°C / +14°F (263K) up to +70°C / +158°F (343K)
Materials
1 Body
2 Bonnet
3 Headpiece
4 Spring
Essential:
DIN EN
ASTM
CW612N B 283 UNS C37770
synthetic material
CW612N B 283 UNS C37770
1.1200
A 227
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08015
Nominal size
Dimension code
Face-to-face dimension
Height
Height
Weight
Technical data
GW
1/4
.X.
0200
FF
50
H1
90
H2
34
ca. kg
0.30
3/8
0300
50
90
34
0.30
1/2
0400
65
105
36
0.45
3/4
0600
80
105
42
0.60
1
1000
95
150
57
1.35
1-1/4
1200
105
160
57
1.80
1-1/2
1400
115
200
72
2.90
2
2000
130
210
72
3.80
Dimensions in mm.
Edition 2016-01
herose.com
137
Pressure reducing Valves
Type 08023
Pressure Reducing Valves
Bronze body, with balanced seat,
disc with NBR seal, pressure gauge connection G1/4,
inlet pressure: up to max. 25.0 bar
outlet pressure: 0.6 up to 7.0 bar
Part No. 08023.X.0000
Union connections with male thread (G) acc. to ISO 228/1
Applications:
Suitable for water, non-viscous liquids, compressed air,
and similar non-inflammable, non-toxic gases.
Working temperature: -10°C / +14°F (263K) up to +90°C / +194°F (368K)
Materials
1 Body
2 Bonnet
3 Spring
Essential:
DIN EN
CC491K
CC491K
1.1200
Picture:
Accessory pressure gauge - not
included with valve
ASTM
B 62 UNS C83600
B 62 UNS C83600
A 227
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08023
Nominal size
Dimension code
Face-to-face dimension
Body length
Height
Height
Weight
Technical data
GW
1/2
.X.
0400
FF
130
b
68
H1
30
H2
110
ca. kg
0.80
3/4
0600
160
92
42
110
1.30
1
1000
180
98
46
150
1.70
1-1/4
1200
185
98
46
160
1.90
1-1/2
1400
225
128
52
190
3.60
2
2000
260
148
75
265
6.70
Dimensions in mm.
Edition 2016-01
138
Phone: +49 4531 509-0
Strainer
Type 08180, Type 08181
Strainer, PN16
Y-type pattern, Bronze body,
stainless steel strainer screen,
female thread connection (G) acc. to ISO 7-1 Rp
Part No. 08180.X.0000
screen with 0.6 mm mesh
Part No. 08181.X.0000
screen with 0.25 mm mesh
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 10.0 bar: -10°C / +14°F (263K) up to +160°C / +320°F (433K)
up to max. 6.0 bar: -10°C / +14°F (263K) up to +200°C / +392°F (473K)
Materials
1 Body
2 Screen
3 Plug
Essential:
DIN EN
CC491K
1.4300
CW614N
ASTM
B 62 UNS C83600
A 276 Grade 302
B 283 UNS C38500
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08180 & 08181
Nominal size
Dimension code
Face-to-face dimension
Height
Socket depth
Flow diameter
Wrench size across flats
Wrench size across flats
Weight
Technical data
GW
1/4
.X.
0200
FF
55
H
37
a
9
d0
11
S1
22
S2
17
ca. kg
0.20
3/8
0300
55
37
9
11
22
17
0.20
1/2
0400
65
38
11
12
27
19
0.25
3/4
0600
75
44
12
18
32
22
0.35
1
1000
90
57
14
24
41
27
0.50
1-1/4
1200
110
67
16
31
50
36
0.85
1-1/2
1400
120
73
18
37
58
41
1.00
2
2000
150
85
202
45
70
50
1.70
Dimensions in mm.
Edition 2016-01
herose.com
139
Strainer
Type 08161
Strainer, PN16
Body and cap in cast iron
Y-type pattern, stainless steel strainer screen
Part No. 08161.X.0000
Flanged connection acc. to DIN EN 1092-1 PN16
face-to-face dimension acc. to DIN EN 558-1, Reihe 1
Available options - on request only:
· screen with 0.25 mm mesh
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 16.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 13.0 bar: -10°C / +14°F (263K) up to +200°C / +437°F (473K)
Materials
1 Body
2 Screen
3 Cap
Essential:
DIN EN
0.6025
1.4301
0.6025
ASTM
A 48-83 Gr. 35B
A 276 Grade 304
A 48-83 Gr. 35B
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08161
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Flow diameter
Mesh
Weight
Technical data
DN
15
.X.
0150
FF
130
H
90
D
95
d0
23
m
1.0
ca. kg
3.0
20
0200
150
100
105
28
1.0
4.0
25
0250
160
115
115
36
1.0
5.0
32
0320
180
125
140
42
1.0
7.0
40
0400
200
150
150
50
1.0
9.0
50
0500
230
160
165
61.5
1.0
12.0
65
0650
290
180
185
78.5
1.25
16.0
80
0800
310
215
200
89.5
1.25
21.0
100
1000
350
235
220
109.5
1.6
30.0
125
1250
400
275
250
137.5
1.6
43.0
150
1500
480
305
285
160
1.6
61.0
Dimensions in mm.
Edition 2016-01
140
Phone: +49 4531 509-0
Strainer
Type 08170
Strainer, PN40
Body in cast steel
Y-type pattern, stainless steel strainer screen
Part No. 08170.X.0000
Flanged connection acc. to DIN EN 1092-1 PN40
face-to-face dimension acc. to DIN EN 558-1, Reihe 1
Available options - on request only:
· screen with 0.25 mm mesh
Applications:
Suitable for non-toxic, non-inflammable fluids, gases and vapours.
The laws, regulations and standards are to observe for the range of application.
Working temperatures and pressures:
up to max. 40.0 bar: -10°C / +14°F (263K) up to +120°C / +248°F (393K)
up to max. 33.0 bar: -10°C / +14°F (263K) up to +225°C / +437°F (498K)
up to max. 21.0 bar: -10°C / +14°F (263K) up to +400°C / +752°F (673K)
Materials
1 Body
2 Screen
3 Cap DN15 - 65
3 Cap DN80 - 150
Essential:
DIN EN
0.0619
1.4301
1.0460
1.0425
ASTM
A 216 Grade WCB
A 276 Grade 304
A 105 Grade II
no reference
When ordering or requesting an offer
please indicate flow medium, working
pressure and working temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EC (PED).
Type 08170
Nominal size
Dimension code
Face-to-face dimension
Height
Flange diameter
Flow diameter
Mesh
Weight
Technical data
DN
15
.X.
0150
FF
130
H
90
D
95
d0
23
m
1.0
ca. kg
4.0
20
0200
150
100
105
28
1.0
5.0
25
0250
160
115
115
36
1.0
6.0
32
0320
180
125
140
42
1.0
8.0
40
0400
200
150
150
50
1.0
10.0
50
0500
230
160
165
61.5
1.0
13.0
65
0650
290
180
185
78.5
1.25
19.0
80
0800
310
215
200
89.5
1.25
24.5
100
1000
350
235
235
109.5
1.6
35.0
125
1250
400
275
270
137.5
1.6
51.0
150
1500
480
305
300
160
1.6
71.0
Dimensions in mm.
Edition 2016-01
herose.com
141
Material comparison DIN EN, DIN and ASTM Standard
Nonferrous materials
DIN EN new
CC490K
CC491K
CC493K
CW450K
CW452K
CW453K
CW507L
CW508L
CW509L
CW610N
CW612N
CW614N
CW617N
CW710R
CW713R
CW718R
CW720R
CW723R
CuSn3Zn8Pb5-C
CuSn5Zn5Pb5-C
CuSn7Zn4Pb7-C
CuSn4
CuSn6
CuSn8
CuZn36
CuZn37
CuZn40
CuZn39Pb0,5
CuZn39Pb2
CuZn39Pb3
CuZn40Pb2
CuZn35Ni3Mn2AIPb
CuZn37Mn3AI2PbSi
CuZn39Mn1AIPbSi
CuZn40Mn1Pb1
CuZn40Mn2Fe1
DIN old
RG2
RG5
RG7
CUSN4
CUSN6
CUSN8
CUZN36
CUZN37
CUZN40
CUZN39PB
MS58
MS58
MS58
CUZN35NI
CUZN40AL
CUZN40AL
CUZN40MN
CUZN40MN
2.1098
2.1096.01
2.1090
2.1016
2.1020
2.1030
2.0335
2.0321
2.0360
2.0372
2.0380.10
2.0401.08
2.0402.20
2.0540
2.0552
2.0561
2.0580
2.0572
ASTM
B 62 UNS C83600
B 505 UNS C93200
B 103 UNS C51100
B 159 UNS C51900
B 103 UNS C52100
B 111 UNS C27000
B 111 UNS C27200
B 111 UNS C28000
B 111 UNS C36500
B 283 UNS C37770
B 283 UNS C38500
B 283 UNS C38000
-
Ferrous materials
DIN EN new
1.1200
1.4021
1.4034
1.4057
1.4104
1.4112
1.4122
1.4300
1.4301
1.4305
1.4306
1.4308
1.4310
1.4401
1.4404
1.4408
1.4409
1.4541
1.4568
1.4571
1.4552
1.4923
1.4980
1.5415
1.7225
1.7258
1.7335
1.7380
1.7709
Spring steel
C20Cr13
X45Cr13
X17CrNi16-2
X14CrMoS17
X90CrMoV18
X39CrMo17-1
X12CrNi18-8
X5CrNi18-10
X8CrNiS18-9
X2CrNi19-11
G-X6CrNi18-9
X10CrNi18-8
X5CrNiMo17-12-2
X2CrNiMo17-12-2
GX5CrNiMo19-11-2
G-X2NiCrMo28-20-2
X6CrNiTi18-10
X7CrNiAI17-7
X6CrNiMoTi17-12-2
G-X7CrNiNb18-9
X22CrMoV12-1
X5CrNiTi26-15
16Mo3
42CrMo4
24CrMo5
13CrMo4-5
10CrMo9-10
21CrMoV5-7
DIN old
Carbon steel
1.4021
1.4034
1.4057
1.4104
1.4112
1.4122
1.4300
1.4301
1.4305
1.4306
1.4308
1.4310
1.4401
1.4404
1.4408
1.4409
1.4541
1.4568
1.4571
1.4552
1.4923
1.4980
1.7225
1.7258
1.7335
1.7380
1.7709
ASTM
A 227
A 276 Grade 420
A 276 Grade 420
A 276 Grade 431
A 276 Grade 430F
A 276 Grade 440B
A 276 Grade 302
A 276 Grade 304
A 276 Grade 303
A 312 TP 304L
A 351 CF8
A 313 Grade 301
A 276 Grade 316
A 276 Grade 316L
A 351 CF 8M
A 351 CF 3M
A 276 Grade 321
A 313 Grade 631
A 313 Grade 316Ti
A 351 CF 8C
A 193 Grade B6
A 286 Grade 660
A 182 Grade F1
A 194 Grade 7
A 194 Grade B7
A 182 Grade F12
A 182 Grade F22
Edition 2016-01
142
Phone: +49 4531 509-0
Dimensions of DIN flanges
DN = Nominal diameter
D = Diameter of flange
Lk = Diameter of bolt circle
n = Number of holes
d = Diameter of holes
PN 6
DN
10
3/8“
PN 10
PN 16
PN 25
PN 40
D
Lk
n
d
D
Lk
n
d
D
Lk
n
d
D
Lk
n
d
D
Lk
n
d
75
50
4
11
90
60
4
14
90
60
4
14
90
60
4
14
90
60
4
14
15
1/2“
80
55
4
11
95
65
4
14
95
65
4
14
95
65
4
14
95
65
4
14
20
3/4“
90
65
4
11
105
75
4
14
105
75
4
14
105
75
4
14
105
75
4
14
25
1“
100
75
4
11
115
85
4
14
115
85
4
14
115
85
4
14
115
85
4
14
32
1-1/4“
120
90
4
14
140 100
4
18
140 100
4
18
140 100
4
18
140 100
4
18
40
1-1/2“
130 100
4
14
150 110
4
18
150 110
4
18
150 110
4
18
150 110
4
18
50
2“
140 110
4
14
165 125
4
18
165 125
4
18
165 125
4
18
165 125
4
18
65
2-1/2“
160 130
4
14
185 145
4
18
185 145
4
18
185 145
8
18
185 145
8
18
80
3“
190 150
4
18
200 160
8
18
200 160
8
18
200 160
8
18
200 160
8
18
100
4“
210 170
4
18
220 180
8
18
220 180
8
18
235 190
8
22
235 190
8
22
125
5“
240 200
8
18
250 210
8
18
250 210
8
18
270 220
8
26
270 220
8
26
150
6“
265 225
8
18
285 240
8
22
285 240
8
22
300 250
8
26
300 250
8
26
200
8“
320 280
8
18
340 295
8
22
340 295
8
22
360 310
12
26
375 320
12
30
PN 63
DN
PN 100
PN 160
PN 250
PN 320
D
Lk
n
d
D
Lk
n
d
D
Lk
n
d
D
Lk
n
d
D
Lk
n
d
10
3/8"
100
70
4
14
100
70
4
14
100
70
4
14
125
85
4
18
125
85
4
18
15
1/2“
105
75
4
14
105
75
4
14
105
75
4
14
130
90
4
18
130
90
4
18
-
-
-
-
-
-
-
-
-
-
20
3/4“
25
1“
32
1-1/4“
140 100
-
-
-
-
4
18
-
-
140 100
-
-
-
-
4
18
-
-
140 100
-
-
-
-
4
18
-
-
150 105
-
-
-
-
4
22
-
-
160 115
-
-
-
-
4
22
-
-
40
1-1/2“
170 125
4
22
170 125
4
22
170 125
4
22
185 125
4
26
195 145
4
26
50
2“
180 135
4
22
195 145
4
26
195 145
4
26
200 150
8
26
210 160
8
26
65
2-1/2“
205 160
4
22
220 170
8
26
220 170
8
26
230 180
8
26
255 200
8
30
80
3“
215 170
4
22
230 180
8
26
230 180
8
26
255 200
8
30
275 220
8
30
100
4“
250 200
4
22
265 210
8
30
265 210
8
30
300 235
8
30
300 265
8
36
Edition 2016-01
herose.com
143
Dimensions of ANSI flanges
DN = Nominal diameter
D = Diameter of flange
Lk = Diameter of bolt circle
n = Number of holes
d = Diameter of holes
B = Flange bore
Ah = Outside diameter butt weld
Class 150
DN
15
1/2“
Class 300
B
Ah
D
Lk
n
d
D
Lk
n
d
15.8
21.3
90
60.3
4
15.9
95
66.7
4
15.9
20
3/4“
20.9
26.7
100
69.9
4
15.9
115
82.6
4
19.0
25
1“
26.6
33.4
110
79.4
4
15.9
125
88.9
4
19.0
32
1-1/4“
35.1
42.2
115
88.9
4
15.9
135
98.4
4
19.0
40
1-1/2“
40.9
48.3
125
98.4
4
15.9
155
114.3
4
22.2
50
2“
52.5
60.3
150
120.7
4
19.1
165
127.0
8
19.0
65
2-1/2“
62.7
73.0
180
139.7
4
19.1
190
149.2
8
22.2
80
3“
77.9
88.9
190
152.4
4
19.1
210
168.3
8
22.2
100
4“
102.3
114.3
230
190.5
8
19.1
255
200.0
8
22.2
125
5“
128.2
141.3
255
215.9
8
22.2
280
235.0
8
22.2
150
6“
154.1
168.3
280
241.3
8
22.2
320
269.9
12
22.2
200
8“
202.7
219.1
345
298.5
8
22.2
380
330.2
12
25.4
Edition 2016-01
144
Phone: +49 4531 509-0
herose.com
145
Approval and Classification
Nowadays, product approvals are essential for many customer applications. Below is an excerpt of our
most important certifications. A detailed list can be found at herose.com.
Type approvals
Approval company
Approval
TÜV
CE
LNG (DIN EN 12567)
Firesafe (DIN EN ISO 10497)
National Board
ASME / UV
AQSIQ
CCC
DIN GOST TÜV
EAC
TSSA
CRN
Mark
AAR
Classification societies
Bureau
Veritas
China
Classification
Society
Det Norske Veritas/
Germanischer
Lloyd
Lloyd‘s Register
Russian Maritime
Register of
Shipping
Edition 2016-01
146
Phone: +49 4531 509-0
Overview ASME Approvals
Safety Valves
HEROSE Type
Inlet
D0
Certificate No.
Media
06216/06217
06216/06217
06216/06217
06216/06217
06216/06217
06216/06217
06310/06311
06310/06311
06315/06316
06315/06316
06345/06346/06347
06345/06346/06347
06383/06388/06413/06418
06383/06388/06413/06418
06383/06388/06413/06418
06383/06388/06413/06418
1/2“
3/4“
1“
1-1/4“
1-1/2“
2“
3/4“ up to 1“
3/4“ up to 1“
1/2“ up to 3/4“
1/2“ up to 3/4“
DN25 up to DN150
DN25 up to DN150
1/2“ up to 3/4“
1/2“ up to 3/4“
1“
1-1/4“ up to 1-1/2“
12 mm
15 mm
20 mm
25 mm
32 mm
40 mm
9/13/17.5 mm
9/13/17.5 mm
10 mm
10 mm
23 bis 125 mm
23 bis 125 mm
7 mm
10.5 mm
15 mm
23 mm
91178
91112
91123
91134
91145
91156
37112
37101
37213
37189
37044
37055
91011
91088
91077
91101
Vapours and Gases
Vapours and Gases
Vapours and Gases
Vapours and Gases
Vapours and Gases
Vapours and Gases
Vapours and Gases
Fluids
Vapours and Gases
Fluids
Vapours and Gases
Fluids
Vapours and Gases
Vapours and Gases
Vapours and Gases
Vapours and Gases
Edition 2016-01
herose.com
147
Safety Valves
General notes
General notes on application, types and identification of safety valves
Application: A safety valve is a valve which opens automatically to prevent a predetermined gauge pressure
being exceeded and which recloses after decrease in pressure.
Definitions: DIN EN ISO 4126-1 und AD 2000 Merkblatt A2 specifies different types and terms for safety valves.
Please see below an extract of this standard.
Standard safety valve: A standard safety valve is a valve which, following opening, reaches the degree of lift
necessary for the mass flow to be discharged within a pressure rise of not more than 10%. No further requirements
are made for the opening characteristics.
Full lift safety valve: A full lift safety valve is a valve which, after commencement of lift, opens rapidly within a 5%
pressure rise up to the full lift as limited by the design. The amount of lift up to the rapid opening (proportional range)
shall not be more than 20% of the total lift.
Set pressure: The set pressure is the gauge pressure at which under operating conditions direct loaded safety
valves commence to lift.
Test pressure: The test pressure is the gauge pressure at which under test stand conditions (atmospheric back
pressure) direct loaded safety valve commence to lift.
Opening pressure: The opening pressure is the gauge pressure at which the lift is sufficient to discharge the
predetermined flowing capacity; it is equal to the set pressure plus opening pressure difference.
Reseating pressure: The reseating pressure is the gauge pressure at which the direct loaded safety valve is
reclosed.
Marking of type tested safety valves
TÜV-Sign
TÜV SV 05 xxx xx D/G/F 0,xx x
Safety Valve
Year of type test approval
Number of type test
Orifice diameter d0
on the inlet side in mm
Application mark:
D- suitable for vapours
G- suitable for gases
F- suitable for fluids
Coefficient of discharge
Set pressure p
Marking of the Types 06505, 06506
F/K/S
Application mark:
F- suitable for Fluids
K- suitable for Granular goods
S- suitable for Powdery goods
Edition 2016-01
148
Phone: +49 4531 509-0
Safety Valves
Advice for installing
Advice for installing of safety valves
Special care is necessary when installing the safety valves in order to ensure the proper functioning of
the valve.
Please note the following instructions carefully:
1.
Safety valves should not be handled roughly during the transport, storage or assembly, e.g. using unsuitable tools.
2.
Care should be taken that foreign bodies do not enter the valve. For this reason the plastic caps covering the connection openings should be removed directly before assembly.
3.
Spring loaded safety valves are to be connected in such a way that the spring cap is placed standing vertically upwards.
Spring loaded safety valves, which implies the note „suitable for horizontal installation“ can be assembled in horizontal position. The outlet flow direction has to be top down then.
4.
The connecting piping must be free from dirt, rust, welding slag and other foreign bodies.
5.
In the case of safety valves with female thread the connection pipes or fittings should not be screwed too deeply into the housing. No sealing material is allowed to enter the valve.
6.
The blow-off pipes must be set at a descending gradient in order that the collection of the substance flowing through is avoided, and no condensation or sweating accumulation takes places in the body of the valve.
7.
The lifting device should only be set in operation when operating pressure is switched on.
8.
Adjustments to the test pressure of the valves, subject to govermental regulations, should only be done in our works or under the supervision of the responsible control authorities.
Edition 2016-01
herose.com
149
Safety Valves
Advice for ordering
Advice for ordering of safety valves
Ordering safety valves please declare additional to Part No. and dimension the following informations:
- type of the medium
- temperature of medium
- set pressure
All orders are subject to our conditions of Sale 07/2014.
Design and materials
All rights are reserved for design changes, e.g. upon entering force of new regulations, and for the use
of other, equivalent materials.
Illustrations, weights and measures are without obligation.
Edition 2016-01
150
Phone: +49 4531 509-0
General Terms and Conditions 07/2014
The following Conditions shall apply for all purchase contracts and contracts for work and services between us and our commercial contract partners (hereinafter referred to as: the Customer) as well as for our
offers, even if we do not explicitly refer to these in individual cases. Deviations from these shall only be binding for us if we have explicitly confirmed this in writing. The Customer‘s purchasing terms and conditions
shall not be binding for us, even if we do not explicitly object to these.
1. Offer and conclusion of order
Our offer remains non-binding with regard to the price, quantity, delivery data and possibility of delivery until the order has been confirmed in writing. Ancillary agreements shall only be effective if we have confirmed
these in writing.
2. Scope of delivery
The scope of delivery is finalised in the confirmation of the order. For goods which are not catalogue items, a tolerance in the quantity of 10 % more or less items is permitted.
3. Delivery and delivery periods
The delivery period commences when all details of the order have been confirmed, however not until the fulfilment of the Customer‘s contractual obligations. The delivery period shall be deemed to have been complied with if the goods have left the warehouse prior to its expiry, or, if dispatch is delayed for reasons for which the Customer is responsible, with the notification of readiness for dispatch within the agreed delivery
period.
Compliance with the delivery period is conditional on correct and timely deliveries to us.
Partial deliveries which are in good time and in suitable quantities are permissible and can be invoiced separately.
If the fulfilment of our obligation for delivery is prevented by force majeure, labour disputes or other events which are not within our sphere of influence - regardless of whether these occur with us or our subsuppliers – the fulfilment of our obligation for delivery shall be extended for the duration of the disturbance. If delivery is rendered impossible due to such an event, or is not reasonable for one of the parties, both
parties shall be entitled to withdraw. In case of arrears or impossibility of delivery for which we are responsible, the customer shall be entitled to withdraw the order according to the statutory conditions. Art. 14 of
these Terms and Conditions shall apply in the case of claims for compensation.
If dispatch is delayed at the wish of the customer, commencing one month after notification of readiness for delivery, the costs which are incurred due to storage, however at least 1 % of the invoiced amount shall
be invoiced to the customer.
4. Prices
All prices are ex stock plus the statutory VAT. The prices which are valid on the day of delivery apply. Packaging, loading costs, customs duties etc. shall be borne by the customer.
5. Shipping
Dispatch and shipping of the goods shall be at the account and risk of the customer.
6. Transfer of risk
The risk shall be transferred to the customer as soon as the goods have left our company. If the dispatch of the goods is delayed due to the customer, the risk shall be transferred with the notification of readiness
for delivery.
7. Terms of payment
The invoiced amounts are payable in cash within 14 days after the date of the invoice with 2 % discount of the net value of the goods, or within 30 days without deduction. Discounts may not be deducted for new
invoices, as long as older invoices which are due for payment have not been settled.
In case of arrears or for the time of deferment of receivables, the statutory interest on arrears shall be charged, regardless of any further claims for compensation. If it becomes apparent subsequent to the conclusion of the contract that our claim for payment is endangered by lack of solvency on the part of the Customer, all of our outstanding invoices shall become due for payment immediately. In this case, we shall be entitled to make outstanding deliveries conditional on cash payment or the provision of a security. Any further statutory claims shall remain unprejudiced by this. Offsetting is only permissible with regard to undisputed
or legally established counterclaims. The Customer is only entitled to exercise a right of retention if the claim is based on the same contractual relationship.
The same shall apply for the retention of payments.
8. Reservation of title
Goods which have been delivered remain our property until payment of all of our outstanding claims, including ancillary costs and interest. This shall also apply to the cashing of cheques for payment of such claims.
In case of current accounts, the reservation of title is deemed to be security for our balance claim. Modification or processing of the goods subject to reservation of title shall be performed on our behalf, without this
giving rise to any obligations for us.
In the case of processing, combination or mixing of our goods with other goods which are not our property, we shall be entitled to co-ownership of the new goods in the relationship of the invoice value of the goods
subject to reservation of title to the value of the other processed goods at the time of processing, combination or mixing. If the Customer obtains the sole ownership of the new goods, he herewith transfers coownership of the new goods in the relationship of the other processed goods at the time of processing, combination or mixing and shall keep the said goods on our behalf with due business diligence.
Resale of the delivered goods, regardless of whether these are unprocessed, or have been processed, combined or mixed is only permitted in the normal course of business with reservation of title, and only then,
if the claims resulting from the resale are ceded to us. The Customer is prohibited from pledging or transferring the goods as security, as is the agreement of a prohibition of assignment and an assignment without
our consent in the context of factoring. The Customer shall inform us without delay in case of seizure or any other impairment of our entitlements by third parties. The Customer hereby assigns to us in advance, all
claims to which he is entitled now or at a later date from the resale or for whatever legal reason with regard to the goods which we have delivered. We accept the said assignment. The value of the goods subject to
reservation of title is our invoice amount plus a security surcharge of 10 %, which however remains without effect if this is precluded by the rights of third parties. In the case of resale of our goods after processing,
combination or mixing, or the resale of the new goods which result from processing, combination or mixing, the claim against the Customer‘s buyer shall be assigned to the amount of the invoice value of our
processed, combined or mixed goods. This shall also apply in the case of resale after our goods have become an essential part of another good after combination or processing with other goods which are not
our property. If the value of the securities which are provided to us exceeds a total of 10 %, we shall be obliged to release securities of our choice if so requested by the Customer. With the payment of our claims,
ownership of the goods subject to reservation of title and the assigned claims shall be transferred to the Customer. Until this is revoked by us, the Customer is entitled to collect the purchase price on our behalf. On
demand, the Customer shall be obliged to notify the assignment to his buyer and to provide the necessary information and to surrender the documents which are necessary for us to enforce our claims against the
said buyer.
10. Liability for defects
The warranty rights of the Customer are conditional on him having fulfilled his obligations for examination and complaint according to Art 377 HGB (German Commercial Code).
Increases or reductions in weight due to the casting process do not entitle the Customer to complaint. If the item being purchased is defective, we can remedy the defect or deliver a replacement, at our discretion.
If we remedy the defect, we shall bear all expenses necessary to remedy the defect, especially the costs of transport, travel, work and material unless they are increased due to the fact that the item being
purchased was taken to a place other than the place of performance. The Customer may withdraw from the contract or demand a reduction if after having been set a reasonable period of grace we fail to provide
a subsequent delivery or correction, if correction has finally failed, if we refuse the said correction or if this is unreasonable to the Customer. If there is only an insignificant fault and the goods can be utilised by the
Customer without disadvantage, he is only entitled to a reduction in the purchase price.
For new products, the warranty period is 1 year from the date of delivery. No warranty is assumed for used products. The period of limitation in case of a delivery recourse according to Art. 478, 479 BGB is not
affected by the regulations of the two previous provisions. Compensation claims due to an injury to life, limb or health which are due to a fault, or according to product liability law are also not restricted by the
aforementioned regulations. Other claims for compensation under warranty law are also not restricted by this regulation in the case of gross negligence, wilful action or breach of major contractual obligations.
Clause 14 of these Terms and Conditions applies.
11. Return delivery
Return deliveries which are not based on a legal claim may only be made with carriage paid with our explicit consent. As compensation for the costs which we incur for any return delivery, we reserve the right
to an appropriate deduction from the net value of the goods in the credit note of at least 20 % of the net value of the goods.
12. Catalogues
Illustrations in our catalogues and brochures are not binding with regard to the design. We reserve the right to changes to the design, insofar as these is necessary for technical reasons and do not impair the
purpose of the contract. Deviations from the specified dimensions and weights are permissible, if the said do not impair the contractual purpose and quality.
13. Copyright
We reserve ownership and copyright for catalogues, illustrations, drawings, samples and other documents. These may not be made accessible to third parties without our consent and must be returned to us
immediately on demand. If an order which is placed with us on the basis of submitted drawings or models infringes against third party patent rights, design rights or trademarks, the Customer shall bear all
responsibility for this and shall be liable to us for any claims for damages or loss of profit and shall indemnify us against any claims by third parties, unless he is not responsible for the infringement.
14. General liability
We shall only be liable in the case of wilful action or gross negligence. In the case of a breach of major contractual obligations we shall also be liable for simple negligence Major contractual obligations are those,
whose fulfilment enables the proper fulfilment of the contract and on whose fulfilment the purchaser may normally rely and does rely. Except for the case of wilful intent, our liability shall be restricted to damage
which is typical for the contract and which is reasonably foreseeable.
The aforementioned limitation of liability shall not apply in the case of injury to life, limb or health and in cases of liability under product liability laws.
The Customers claims for the compensation of expenses pursuant to Section 284 BGB are excluded to the extent that the claim for damages in lieu of performance is excluded pursuant to the foregoing provisions.
The aforementioned restriction of liability shall also apply in favour of our employees, bodies and other agents.
15. Place of performance, place of jurisdiction, applicable law, miscellaneous
The place of performance for all claims arising from this contract is our registered office. The place of jurisdiction for all disputes with businessmen, legal entities under public law or special funds under public law,
or with persons who do not have a general jurisdiction in Germany, is our registered office. However, we are entitled to bring an action against the Customer at the Customers registered place of business.
These Conditions shall be governed by the laws of the Federal Republic of Germany to the exclusion of the UN Convention of the International Sale of Goods (CISG).
Edition 2016-01
herose.com
151
For your notes
Edition 2016-01
152
Phone: +49 4531 509-0
Product range
CRYOGENIC
Globe valves, control valves, check valves and fillsystems for Cryogenic Service
Media: liquefied gases such as oxygen, nitrogen, argon, krypton and LNG
Sizes: DN10 (3/8“) to DN50 (2“) (gunmetal/brass)
DN10 (3/8“) to DN200 (8“) (stainless steel)
Temperature: –255°C (–427°F) to +120°C (+248°F)
Pressure: up to 50 bar (725 psi)
Safety valves for Cryogenic Service
Media: liquefied gases such as oxygen, nitrogen, argon, carbon dioxide
and LNG
Sizes: DN6 (1/4“) to DN50 (2“)
Temperature: –270°C (-454°F) to +400°C (+752°F)
Pressure: 0.2 bar (3 psi) to 250 bar (3626 psi)
INDUSTRY
Safety valves for gases, vapours and fluids
Media: Gases, vapours, fluids, liquefied gases, refrigerants and dusty media
Sizes: DN6 (1/4“) to DN50 (2“)
Temperature: –270°C (–454°F) to +400°C (+752°F)
Pressure: 0.2 bar (3 psi) to 250 bar (3626 psi)
DIN EN valves made of gunmetal/brass
Media: non-flammable and non-toxic fluids, gases and vapours
Sizes: DN6 (1/4“) to DN150 (6“)
Temperature: –10°C (+14°F) to +200°C (+392°F)
Pressure: up to 16 bar (232 psi)
ENERGY
Drain valves, three-way valves, ball valves and gate valves for oil-immersed
transformers
Transformer oil
Media: DN15 (1/2“) to DN250 (10“)
Sizes: Temperature: –50°C (–58°F) to +120°C (+248°F)
Pressure: up to 16 bar (232 psi)
All rights reserved, subject to errata and printing errors
Edition 2016-01
herose.com
153
HEROSE GMBH
ARMATUREN UND METALLE
Elly-Heuss-Knapp-Strasse 12
23843 Bad Oldesloe
Germany
Phone:+49 4531/509-0
Fax: +49 4531/509-120
info@herose.com
All rights reserved, subject to errata and printing errors
herose.com

Similar documents

np_gru_(jib_crane)

np_gru_(jib_crane) Jib cranes with articulated arm, maximum lifting capacity 500kg

More information

DZR Ball Valves

DZR Ball Valves 100CEXT Extended Stem

More information