Accessory Catalogue Ersa Soldering Machines

Accessory Catalogue Ersa Soldering Machines

Accessory Catalogue
Ersa Soldering Machines
Titelseite
Selective Soldering Nozzles,
Lubricants & Cleaning Products, Flux,
Solderbath Maintenance, Fluxer Accessories,
Solder Frames, Auxiliaries, Supplies and more
2
Content
Selective Soldering Nozzles........................................................................................................3-11
Height 47 mm, B14,1 ............................................................................................................................................................................................ 3-5
Height 56 mm, B14,1 ................................................................................................................................................................................................ 5
Height 57 mm, B14,1 ................................................................................................................................................................................................ 5
Height 59 mm, B14,1 ................................................................................................................................................................................................ 5
Height 62 mm, B14,1 ................................................................................................................................................................................................ 6
Height 64 mm, B14,1 ................................................................................................................................................................................................ 6
Height 65 mm, B14,1 ................................................................................................................................................................................................ 6
Height 75 mm, B14,1 ............................................................................................................................................................................................ 6, 7
Height 80 mm, B14,1 ............................................................................................................................................................................................ 7, 8
Height 85 mm, B14,1 ................................................................................................................................................................................................ 8
Height 90 mm, B14,1 ................................................................................................................................................................................................ 9
Special Nozzles, B14,1 .............................................................................................................................................................................................. 9
Height 47 mm, B16,1............................................................................................................................................................................................... 10
Height 56 mm, B16,1............................................................................................................................................................................................... 10
Height 58 mm, B16,1............................................................................................................................................................................................... 10
Height 75 mm, B16,1................................................................................................................................................................................................11
Height 85 mm, B16,1................................................................................................................................................................................................11
Height 90 mm, B16,1................................................................................................................................................................................................11
Lubricants & Cleaning Products................................................................................................... 12
Flux..................................................................................................................................................... 13
Solderbath Maintenance......................................................................................................... 14, 15
Solderbath Maintenance General........................................................................................................................................................................ 14
Solderbath Maintenance Wave............................................................................................................................................................................. 14
Solderbath Maintenance Selective...................................................................................................................................................................... 15
Fluxer Accessories.....................................................................................................................16-18
Sensor Shuttle PTP......................................................................................................................... 18
Solder Frames.............................................................................................................................19, 20
250 mm working width........................................................................................................................................................................................... 19
330 mm working width............................................................................................................................................................................................ 19
400 mm working width........................................................................................................................................................................................... 19
500 mm working width........................................................................................................................................................................................... 19
Spare Parts 250 mm working width............................................................................................................................................................. 19, 20
Spare Parts 330 mm - 500 mm working width.................................................................................................................................................20
Auxiliaries and Supplies............................................................................................................21, 22
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 47 mm, B14,1
S NOZZLE 1.8/2.5; H=47; B14,1
S NOZZLE 2.0/3.5; H=47; B14,1
S NOZZLE 2.0/4.5; H=47; B14,1
S NOZZLE 2.5/4.0; H=47; B14,1
175060
229807
213510
119890
1 pcs.
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 3.0/4.5; H=47; B14,1
S NOZZLE 3.0/6.0; H=47; B14,1
S NOZZLE 3.0/6.0; H=47; B14,1
S NOZZLE 3.5/10.0; H=47; B14,1
119270
114609
136925
114614
1 pcs.
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 3.5/6.0; H=47; B14,1
S NOZZLE 3.5/7.0; H=47; B14,1
S NOZZLE 4.0/6.0; H=47; B14,1
S NOZZLE 4.0/8.0; H=47; B14,1
256500
256501
256502
114611
1 pcs.
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 5.0/8.0; H=47; B14,1
S NOZZLE 5.0/9.0; H=47; B14,1
S NOZZLE 6.0/10.0; H=47; B14,1
S NOZZLE 6.0/8.0; H=47; B14,1
231733
152894
114613
152892
1 pcs.
1 pcs.
1 pcs.
1 pcs.
3
4
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 47 mm, B14,1
S NOZZLE 6.0/8.0; H=47; B14,1
S NOZZLE 8.0/12.0; H=47; B14,1
S NOZZLE 8.0/12.0; H=47; B14,1
S NOZZLE 10.0/14.0; H=47; B14,1
235142
118615
249012
119274
1 pcs.
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 10.0/14.0; H=47; B14,1; CROSS
S NOZZLE 12.0/16.0; H=47; B14,1
S NOZZLE 14.0/18.0; H=47; B14,1
S NOZZLE 16.0/20.0; H=47; B14,1; CROSS
257563
208094
190959
245562
1 pcs.
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 16.0/20.0; H=47; B14,1; CROSS
S NOZZLE 17.0/19.0; H=47; B14,1
S NOZZLE 18.0/20.0; H=47; B14,1
S NOZZLE 18.0/22.0; H=47; B14,1; CROSS
263686
200108
134354
255046
1 pcs.
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 21.0/25.0; H=47; B14,1; CROSS
S NOZZLE 21.0/25.0; H=47; B14,1; CROSS
S NOZZLE 23.0/25.0; H=47; B14,1
S NOZZLE 25.0/29.0; H=47; B14,1; CROSS
260489
263020
239623
245561
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
5
Height 47 mm, B14,1
S NOZZLE 25.0/29.0; H=47; B14,1; CROSS
S NOZZLE 28.0/32.0; H=47; B14,1; CROSS
S NOZZLE 31.0/35.0; H=47; B14,1; CROSS
S NOZZLE 31.0/35.0; H=47; B14,1; CROSS
263514
248298
255975
263689
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Height 56 mm, B14,1
Height 57 mm, B14,1
S NOZZLE 4.0/8.0; H=56; B14,1
S NOZZLE 2.5/5.0; H=57; B14,1
S NOZZLE 3.0/6.0; H=57; B14,1
S NOZZLE 4.0/8.0; H=57; B14,1
179252
251602
130964
189478
1 pcs.
1 pcs.
1 pcs.
Height 57 mm, B14,1
1 pcs.
Height 59 mm, B14,1
S NOZZLE 4.0/8.0; H=57; B14,1
S NOZZLE 6.0/10.0; H=57; B14,1
S NOZZLE 8.0/12.0; H=57; B14,1
S NOZZLE 3.0/4.5; H=59; B14,1
209365
189479
203778
210391
1 pcs.
1 pcs.
1 pcs.
1 pcs.
6
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 62 mm, B14,1
S NOZZLE 2.0/4.5; H=62; B14,1
S NOZZLE 2.5/5.0; H=62; B14,1
S NOZZLE 3.0/6.0; H=62; B14,1
S NOZZLE 3.0/6.0; H=62; B14,1
248354
248391
178809
199983
1 pcs.
1 pcs.
1 pcs.
Height 62 mm, B14,1
1 pcs.
Height 64 mm, B14,1
S NOZZLE 4.0/8.0; H=62; B14,1
S NOZZLE 6.0/10.0; H=62; B14,1
S NOZZLE 8.0/12.0; H=62; B14,1
S NOZZLE 3.0/6.0; H=64; B14,1
199985
199984
197404
260051
1 pcs.
1 pcs.
Height 65 mm, B14,1
1 pcs.
1 pcs.
Height 75 mm, B14,1
S NOZZLE 2.0/4.5; H=65; B14,1.5
S NOZZLE 4.0/8.0; H=65; B14,1
S NOZZLE 3.0/6.0; H=75; B14,1
S NOZZLE 4.0/8.0; H=75; B14,1
250821
135253
216347
206293
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 75 mm, B14,1
S NOZZLE 4.0/8.0; H=75; B14,1
S NOZZLE 6.0/10.0; H=75; B14,1
S NOZZLE 8.0/12.0; H=75; B14,1
S NOZZLE 8.0/12.0; H=75; B14,1
206303
206294
235693
251285
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Height 75 mm, B14,1
Height 80 mm, B14,1
S NOZZLE 10.0/14.0; H=75; B14,1
S NOZZLE 3.0/6.0; H=80; B14,1
S NOZZLE 3.5/7.0; H=80; B14,1
S NOZZLE 4.0/8.0; H=80; B14,1
251316
278549
213419
213417
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Height 80 mm, B14,1
S NOZZLE 4.0/8.0; H=80; B14,1
S NOZZLE 6.0/10.0; H=80; B14,1
S NOZZLE 6.0/10.0; H=80; B14,1
S NOZZLE 6.0/10.0; H=80; B14,1
251318
211313
213418
251319
1 pcs.
1 pcs.
1 pcs.
1 pcs.
7
8
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 80 mm, B14,1
S NOZZLE 7.0/11.0; H=80; B14,1
S NOZZLE 8.0/12.0; H=80; B14,1
S NOZZLE 9.0/13.0; H=80; B14,1
S NOZZLE 10.0/14.0; H=80; B14,1
211557
211314
211559
211315
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Height 85 mm, B14,1
S NOZZLE 2.6/5.6; H=85; B14,1
S NOZZLE 2.8/5.6; H=85; B14,1
S NOZZLE 3.0/5.6; H=85; B14,1
S NOZZLE 3.0/6.0; H=85; B14,1
285199
282773
282775
278550
1 pcs.
1 pcs.
S NOZZLE 3.5/5.6; H=85; B14,1
S NOZZLE 3.5/7.0; H=85; B14,1
229921
229923
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 90 mm, B14,1
Special Nozzles, B14,1
S NOZZLE 4.0/8.0; H=90; B14,1
S NOZZLE 3.0/6.0; H=20; SPECIAL
S NOZZLE 5.0/24.0; H=46; SPECIAL
S NOZZLE 8.0/24.0; H=46; SPECIAL
197665
289546
223539
223544
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Special Nozzles, B14,1
S NOZZLE 14.0/28.0; H=46; SPECIAL
S NOZZLE 15.0/31.0; H=46; SPECIAL
S NOZZLE 4.0/30.0; H=47; SPECIAL
S NOZZLE 5.0/20.0; H=47; SPECIAL
272476
272385
248276
266283
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 5.0/20.0; H=47; SPECIAL
S NOZZLE 10.0/25.0; H=47; SPECIAL
S NOZZLE 35.0/8.0; H=83; SPECIAL
273501
289533
273362
1 pcs.
1 pcs.
1 pcs.
1 pcs.
9
10
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 47 mm, B16,1
S NOZZLE 2.5/4.0; H=47; B16,1
S NOZZLE 3.0/4.5; H=47; B16,1
S NOZZLE 3.0/6.0; H=47; B16,1
S NOZZLE 3.5/10.0; H=47; B16,1
33143
6isk47957021a
6isk47957020a
25420
1 pcs.
1 pcs.
1 pcs.
1 pcs.
S NOZZLE 4.0/8.0; H=47; B16,1
S NOZZLE 8.0/12.0; H=47; B16,1
S NOZZLE 10.0/14.0; H=47; B16,1
S NOZZLE 12.0/16.0; H=47; B16,1
6isk47957022a
25421
6isk47957023
96112
1 pcs.
1 pcs.
Height 56 mm, B16,1
1 pcs.
Height 58 mm, B16,1
S NOZZLE 3.0/4.5; H=56; B16,1
S NOZZLE 4.0/8.0; H=56; B16,1
S NOZZLE 3.0/6.0; H=58; B16,1
64673
64654
137134
1 pcs.
1 pcs.
1 pcs.
1 pcs.
Selective Soldering Nozzles
Finger Conveyor
Roller Conveyor
Pin Chain Conveyor
= (M)
= (R)
= (K)
Nozzle height
with variable Z-Axis
ECOSELECT 1
≤ 90 mm (M)
≤ 85 mm (M)
ECOSELECT 2
≤ 75 mm (K)
≤ 59 mm (K)
ECOCELL
≤ 85 mm (R), 75 mm (K) ≤ 59 mm (R, K)
Nozzle height with variable Z-Axis
SMARTFLOW ≤ 75 mm (M)
VERSAFLOW 3 ≤ 85 mm (R)
VERSAFLOW 4 ≤ 85 mm (R)
----≤ 59 mm (R)
≤ 59 mm (R)
Height 75 mm, B16,1
Height 85 mm, B16,1
S NOZZLE 4.0/8.0; H=75; B16,1
S NOZZLE 4.0/8.0; H=85; B16,1
S NOZZLE 4.0/8.0; H=85; B16,1
184678
138145
184677
1 pcs.
1 pcs.
1 pcs.
Height 90 mm, B16,1
S NOZZLE 4.0/8.0; H=90; B16,1
S NOZZLE 4.3/8.0; H=90; B16,1
S NOZZLE 6.0/10.0; H=90; B16,1
S NOZZLE 6.2/10.0; H=90; B16,1
162216
168373
162195
168446
1 pcs.
1 pcs.
1 pcs.
1 pcs.
11
12
Lubricants & Cleaning Products
Lubricants
Figure
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Lubricants
Description
Order No.
Figure
High temperature chain oil
Order No.
Higt temp. grease Barrierta tube 50 gr.
LUBCON - special oil, Turmofluid 40B,
0,4 l Spraycan
6XOEL24-0.4S
LUBCON - special oil, Turmofluid 40B,
0,5 l bottle
6XOEL24-0.5
LUBCON - special oil, Turmofluid 40B,
1,0 l bottle
6XOEL24-1.0
for filling the high temperature bearing 6LAP40-15FD-T
163081
Grease TAS-WT till 1400°C - 100 g tube
LUBCON - special lubricant, TURMOPAST TAS WT, paste without dropping
points. Temperature application range
-30 °C up to +1400 °C (higher tahn 200
°C: the paste turns to a dry lubrication)
High temperature grease UH1-96-402
delivery in tubes with 80 g
Description
28444
OKS 250 Metal-free multi paste 80 ml
171146
Lubrication of toothed bars of width
adjustment, splined shafts and
separating agents for screws in the
hot area
216540
OKS 250 Metal-free multi paste 250 g
Lubrication of toothed bars of width
adjustment, splined shafts and
separating agents for screws in the
hot area
210939
Figure
Lubrication set OKS 250 paste
tube 80 g and 5 lube brushes
211218
210860
Grease gun filled w. Isoflex NBU15
contain 50 g grease
210996
Lubrication set Isoflex NBU15
tube 50 g and lube brush
210862
ESD-Cleaner 1 l
for cleaning of ESD- slices
211125
ESD - cleaner with mircofiber high
ressistance cloth
211214
Microfibre high-quality cloth
for cleaning of acrylic glass slices in
machine covers in conjunction with
cleaner 211125
211207
Cleaning cloth for sprayheads
cleaning clothes lint-free, 100x100
17231
Sygol Cleaner in 10 l CAN
Pencil for grease
211209
cleaner for high contamination especially in reflow- and wave soldering
machines
6ZT00224
Needle for cleaning 130-270 micro nozzle
Grease gun
Pressol plunger push press with cupped and pointed adapter, connection
thread M10x1 size 80 cm³ AD43 mm
L = 140 mm
Order No.
214163
Grease Klueber Microlube GL 261 40 g
Lubrication of linear track with high
stress
Description
Cleanup set for Anti-Static Plastic
Spindle grease, 50 g
NBU 15 for lubrication of the shaft
from the z-axis (Flex and dipmodul) in selective and wave soldering
machines
Cleaning Products
92159
for sprayhead of the versaflow and
ecocell selective soldering machine
78722
Flux
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Low Residue - No-Clean Flux
Figure
Description
13
Water Based Flux
Order No.
Figure
Description
Order No.
Flux IF 2005M
Flux IF 2009 MLF
1,8 % solid content; suitable for wave soldering leaded and
lead-free
3,6 % solid content; ultralow solder balling; suitable for waveand selective soldering
10 l Can
4FMJF2005-10
1 l bottle
4FMMLF2009-1
25 l Can
4FMJF2005-25
10 l Can
4FMMLF2009-10
200 l Barrel
4FMJF2005-200
Flux Pacific IF 2009M
Thinner IF TT2005M
3,7 % solid content; low residue high compatibility with conformal coating; suitable for wave- and selective soldering
Thinner for IF 2005M
10 l Can
4HMTT2005-10
1 l bottle
4FMJF2009-1
25 l Can
4HMTT2005-25
10 l Can
4FMJF2009-10
25 l Can
4FMJF2009-25
Flux IF TS15
Flux Pacific IF2009
1,5 % solid content, foamable
2,5 % solid content
10 l Can
4FMJFTS15-10
10 l Can
4FMJF2009-2.5-10
25 l Can
4FMJFTS15-25
25 l Can
4FMJF2009-2.5-25
200 l Barrel
4FMJFTS15-200
Thinner E3226
Flux Pacific IF 2010F
Thinner for IF TS15 and IF TS18
10 l Can
4HMVER-5
20 l Can
4HMVER-20
2,5 % solid content; low residue high compatibility with conformal coating; suitable for wave soldering and foam contract
Flux RA200 5 l can
4,5 % solid content; halogen free
activated; no resins contained
4FMJF2010-1
10 l Can
4FMJF2010-10
Flux IF 2040
4FMRA200-5
6,5 % solid content; low residue high conpatibility with conformal coating; suitable for selective soldering
Flux RA201 5 l can
2 % solid content; halogen free
activated; no resins contained
1 l bottle
4FMRA201-5
1 l bottle
4FMJF2040-1
10 l Can
4FMJF2040-10
25 l Can
4FMJF2040-25
Flux for special applications
Figure
Description
Order No.
Flux GR8 5 l can
Thinner for Flux RA201, 5 l can
4HMVER201-5
14, 5% solid content; halogen free
activated; resins contained
Flux IF 2005K
Flux R8 in 5 l can
2,5 % solid content; suitable for wave soldering lead-free and
selective soldering leaded
15 % solid content; activated with
organic halogens; resins contained
1 l bottle
4FMJF2005K-1
10 l Can
4FMJF2005K-10
25 l Can
4FMJF2005K-25
4FMGR8-5
4FMR8-5
Thinner E3226
Flux IF 2005C
10 l Can
4HMVER-5
3,4 % solid content; suitable for selective soldering leaded
and lead-free
20 l Can
4HMVER-20
1 l bottle
4FMJF2005C-1
10 l Can
4FMJF2005C-10
25 l Can
4FMJF2005C-25
14
Solderbath Maintenance
Solderbath Maintenance General
Figure
Description
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Solderbath Maintenance Wave
Order No.
Service gloves (pair)
Figure
Description
Brush flat sor. 40 1"
6ZT00073
for the hot area
Size M
6HDSGLGEW-289
Size L
6HDSGLGEW-290
Mould for alloy analysis
for the tin analysis at Ersa
Order No.
Spatula b=150 mm
100449
6ISK714-05A
Silicon brush
Solderbath Maintenance Wave
Figure
Description
112539
Order No.
De-Drossing Tool Set for Solder Pot
for Wave and Dip Soldering Modules
including special lead-free tooling
with L2C coated surfaces
Consisting of 13 tools to maintain the
solder bath
123551
Solder Laddle
suitable for removal of fluid solder
from the soldering bath. For example
for alloy analysis
6ISK714-01
Solder Scrapper
this tool is used together with the
tool for the remove dross. A optimal
tool to seperate the oxids from the
useful solder
6ISK714-03
Tool to remove dross
100692
Multigrip pliers (pair)
240 mm length
6ZT00095
Scraper flexible
100676
Scraper - silicon
Small
112541
Large
112540
Wooden scraper
112537
De-Drossing Tool Set f. Solder Pot green
265515
Cover oil HAT (Pump drive) 1 l Tin
1 l - can for the cover of the pump
drive at wave soldering machines.
Prevent surface oxidation. HAT is
synthetic and oil-free
4HMHT
Removing tool with interlocking
nozzle removing tool for Ersa wave
nozzles
12555
Red oxide paint 750 g/tin
for painting of moulding solder pots
to protect them from pitting because
of the lead-free soldering
4HMFARBE
Solderbath Maintenance
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Solderbath Maintenance Selective
Figure
Description
Solderbath Maintenance Selective
Order No.
De-Drossing Tool Set
consist of:
3x Brush flat sor. 40.1"" 6ZT0073
1x Service gloves (pair), size L
6HDSGLGEW-290
1x Ladle for feeding pipe 100613
1x Scraper flexible 100676
1x Spoon to remove dross in versflow
pot 100604
1x Solder Laddle 6ISK714-01
15
Figure
Description
Order No.
Brush for tube Dia. 5 mm stainless tread M6
4SNP00-ZB0-010
47701
Cleaning brush f. nozzles diameter 6 mm
247811
Nozzle Removal Tool Version 2
for selective nozzle standard and thin
6ISK47957091
Combi tool for nozzle removal
optimal combi tool to remove the
nozzle and the gasification ring of
selective soldering machines
6ISK47957090A
Brush for tube Ø 8 mm stainless tread M6
47702
Tongs for the exchange of tips
3ZT00164
Brush for tube Dia. 10 mm stainless tread M6
47703
Cleaning paste IF930 f. nozzles
for cleaning/activation of wettable selective nozzles
10 ccm
179904
30 ccm
179905
Handle M6 Dia. 23 L 60
47704
Dispenser for 10 ccm
for cartridges 179904
104118
Tray for solder module
243401
Reworkpaste for nozzle plates, 500 g
Spoon to remove dross in versaflow pot
100604
103933
Needle f. dispens.Ø=1,63/1,35;l=25.4viol
for rework paste solder nozzles
Versaflow
103556
Cleaning brush f. nozzles diameter 2,5 mm
twisted brush with stainless steel
bristles 2,5 mm bristle diameter,
borderlength: 120 mm, total length:
300 mm
258787
Cleaning paste IF930 f. nozzles, 10 ccm
Brush for tube Ø= 3 mm stainless tread M4
Handle 2,8 - 4 mm black -synthetic
47700
Tool Set for cleaning and activation of solder nozzles. Consisting of: 2 EA of 179904
"cleaning paste" HS code 38109090, 5
EA of 103556 needle HS code 73181590,
1 EA of 47703 brush for tube HS code
96035000, 1 EA of 47704 handle for
tube HS code 84879090, 1 EA of 213024
cleaning brush HS code 96039099
106249
Needle 90° LL Nr.14 Id1,6 mm
Handle 2,8 - 4 mm black -synthetic
47705
130271
16
Fluxer Accessories
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Fluxer Selective Machines
Figure
Description
Fluxer Selective Machines
Order No.
Figure
Sprayhead flux jet II - 130 micrometer
Order No.
Over pressure valve
6FLX-REA06
for pressure tank 234045
Sprayhead flux jet II 1/180 micrometer
205266
Manometer 0-2,5 bar 1/8"
6FLX-REA08
for pressure tank 234045
Sprayhead flux jet II 1/270 micrometer
125875
PTFE Sealing 1/4" 25% Carbon
6FLX-REA07
for pressure tank 234045
Sealing ring for Wedotec-spray head
for nozzle plate of the sprayheads
6FLX-REA06, 6FLX-REA08 and 6FLXREA07
Description
259583
Cleaning needle 130 - 350 micrometer
82240
for cleaning the nozzle plate from
sprayheads of the VERSAFLOW and
ECOCELL selective soldering machine
17233
Spring part with sealing, Wedotec
for sprayheads 6FLX-REA06, 6FLXREA08 and 6FLX-REA07
156252
Fluxer Powerflow Series
Figure
Wear set Flux-Jet; Wedotec
content: 2x nozzle plate sealing
2x fixing srews for nozzle plate
2x safety washer
1x spring
234045
Float switch for spray pressure tank
203148
6FLX-SPR-12
for Sprayhead 110089
110091
Spray head complte, flood gate
set with sprayhead and quick change
mount
110095
contains all mounted seals, the
needle and the spring
138113
Spray head repair kit, complete
Precision pres reg 0,05-2 bar
pressure regulator for pressure tank
234045
Quick change holder
Spray head repair kit, sealing
Level sensor
capactive level sensor for older
pressure tanks
Order No.
110089
156183
Pressure tank 2 l. V4A 1.4404 bottom
pressure tank for selective soldering
machine
Description
Spray head, flood gate KA-2/SW jet: 0,3
101992
content: retaining ring, air cap, nozzle, adjusting srew, 3x grub srews, 3x
countersunk screw, 2x air connection,
material connection
138111
Fluxer Accessories
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Fluxer Powerflow Series
Figure
Description
Fluxer Powerflow Series
Order No.
Figure
FC-holder(110091) repair kit, sealing
contains all installed seals
needle for gate sprayhead. Only
usage in conjunction with the fluid
nozzle 235322
207521
set with needle and fluid nozzle 0,5
mm gate sprayhead. For reconstruction from 0,3 mm to 0,5 mm diameter
235322
136796
Sealing set ISOLAST f. spray head holder
245214
article number company Hofmann 640584 186401
2x O-Ring 3 x 1 Isolast
3x O-Ring 5 x 1 Isolast
1x O-Ring 1,5 x 1 Isolast
2x O-Ring 3,68 x 1,78 Isolast"
Pressure spring 0,7 x 13,5 mm 820017
for sprayhead 110089
Order No.
Spray head, flood gate jet/needle 0,5
Needle 0,2 / 0,3 mm Nr.111670 flood gate
needle for sprayhead 110089 with 0,3
mm fluid nozzle
Description
Needle for flux head inox 1.4571
164292
Nozzle 0,3 mm Nr.210111 flood gate
fluid nozzle for 110089 with 0,3 mm
diameter
17
Spray head repair kit, sealing
233202
special seal kit for spray head with
ISOLAST sealings
182097
O-Ring 2,9x1,78 Viton article-no.:640026
234130
Fluxer ETS, EWS and NWAVE Series
Figure
O-Ring 8,5x1,8 Viton Artikel-Nr.:640366
Description
6ISK171009
234132
O-RING 18X1,5 Fa. Schütze ART. NR.640006
246024
Cap ring 23x10 mm Nr.410059 flood gate
266004
Order No.
Spray unit
Sprayhead-repair-kit
contains all seals and needle
6FLXSPR-14
Spray nozzle 2050 (stainless steel)
replacement fluid nozzle spraying
system standard
6FLXSPR-02
Spray nozzle (stainless steel)
fluid nozzle spraying systems for lower flux quantity
Spray nozzle air-cap 60° VA, flood gate
224571
Spray nozzle 1650
6FLXSPR-02-S1
Spray nozzle 2850
6FLXSPR-02-S2
Air nozzle 67228- 45° V2A
6FLXSPR-03
Flux head 0,5 mm
fluid nozzle with 0,5 mm for gate
sprayhead. Only usage in conjunction
with the suitable needle 235322
235321
18
Fluxer Accessories
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Foam Fluxer
Figure
Description
Order No.
Figure
Foam tube 250 mm, Dia. 41 mm
separately packed! Dust protection
Order No.
Foam tube 400 mm, ø 41 mm
6IN131
middle pore side 10 µm; foam tube
packed separately because of dust
protection
Foam tube 330 mm, Dia. 41 mm
middle pore side 10 µm; foam tube
packed separately because of dust
protection
Description
6IN045-2
Foam tube 450 mm, Dia. 41 mm
6IN045-1
middle pore side 10 µm; foam tube
packed separately because of dust
protection
6IN045-3
Description
Order No.
Sensor Shuttle PTP
Figure
Description
Order No.
Ersa Sensor Shuttle
PTP temperature recorder for soldering machines. Real time measuremnt
during the passage via bluetooth
connection
Thermocouple comp. cable Ni/CrNi diamete
131150
Shuttle carrier
carrier for the sensor shuttle PTP
159916
Li-Ionen Akku globalPoint ICS
replacement battery for the sensor
shuttle PTP
201950
Antenna 50R/SMA-M RX bendable
replacement antenna for the sensor
shuttle PTP
223683
Thermocouple Ni/CrNi with plug
thermal element with the adapter for
Ersa sensor shuttle 500 mm length
6ETHE2x0.20NI
yard goods
6ETHE2x0.50NI
Thermo plug "K" Jumo, male
for connection of the thermal sensor
cable at the Ersa sensor shuttle
6ETHE-NI-ST
Thermo coupling "K" Jumo, female
212495
Antenna 50R/SMA-M TX,short stub antenna
replacement stub antenna for the
sensor shuttle PTP
yard goods
Thermo element compensation cable
129920
Measurement Board f. Ersa Sensor Shuttle
measurement board for wave soldering machine. Especially for usage
with the sensor shuttle PTP
Figure
6ETHE2x0.20/500
opposite of the thermal plug 6ETHNI-ST
6ETHE-NI-KU
Kapton Adhesive tape
high temperature tape for fixing of
the thermal sensors on the temporary measurement board
6ZT00160
Service gloves (pair)
for the hot area
Size M
6HDSGLGEW-289
Size L
6HDSGLGEW-290
Solder Frames
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Wave Soldering Machines, 250 mm working width
Figure
Description
Order No.
Wave Soldering Machines, 500 mm working width
Figure
Solder pallet ETS 250
Description
Order No.
Solder pallet
Length 360 mm
4LRM360-250
Length 420 mm
4LRM420-250
Length 500 mm
4LRM500-250
Solder pallet for Ersa soldering machine with a working width of
500 mm
Solder pallet ETS 250
Length 420 mm
4LRM420-5SC-F
Length 500 mm
4LRM500-5SC-F
Length 600 mm
4LRM600-5SC-F
Soldering frame Transp.
Length 360 mm
4LRM360-250A
Length 500 mm
4LRM500-250A
Soldering frame for Ersa Powerflow with separated conveyor
and 500 mm working width
Length 600 mm
4LRM600-250A
Length 420 mm
4LRM420-5SC-FL
Length 500 mm
4LRM500-5SC-FL
Length 600 mm
4LRM600-5SC-FL
Solder pallet, 360 mm length
solder pallet for Ersa soldering machines with working width of 330 mm.
Not suitable for ETS 330 soldering
machine with only one conveyor drive
chain. Length 360 mm
4LRM360-3SC-F
Spare Parts, 250 mm working width
Figure
Wave Soldering Machines, 330 mm working width
Figure
19
Description
Order No.
Description
Order No.
Sidebar ETS 250
Length 360 mm
4KLE25-360-000
Length 420 mm
4KLE25-420-000
Length 500 mm
4KLE25-500-000
Solder pallet
solder pallet for Ersa soldering machine with a working width
of 330 mm. Not suitable for ETS 330 soldering machine with
only one conveyor-driving chain.
Length 420 mm
4LRM420-3SC-F
Length 500 mm
4LRM500-3SC-F
Length 600 mm
4LRM600-3SC-F
Center bar ETS 250
Length 360 mm
4DKLE2-360-000
Length 420 mm
4DKLE2-420-000
Length 500 mm
4DKLE2-500-000
Soldering frame Transp.
Sidebar stainless steel ETS 250
Soldering frame for Ersa Powerflow with separated conveyor
and 330 mm working width.
Length 600 mm
Length 420 mm
4LRM420-3SC-FL
Length 500 mm
4LRM500-3SC-FL
Length 600 mm
4LRM600-3SC-FL
Center bar stainless steel ETS 250
Length 600 mm
Wave Soldering Machines, 400 mm working width
Figure
Description
Order No.
Solder pallet
Solder pallet for Ersa soldering machine with a working width
of 400 mm
Length 420 mm
4LRM420-4SC-F
Length 500 mm
4LRM500-4SC-F
Length 600 mm
4LRM600-4SC-F
Soldering frame Transp.
Soldering frame for Ersa Powerflow with separated conveyor
and 400 mm working width
Length 420 mm
4LRM420-4SC-FL
Length 500 mm
4LRM500-4SC-FL
Length 600 mm
4LRM600-4SC-FL
4KLE25-600-000
4DKLE0-600-000
20
Solder Frames
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Spare Parts, 330 mm - 500 mm working width
Figure
Description
Order No.
Support profiles
Spare Parts, 330 mm - 500 mm working width
Figure
Description
Order No.
Center bar, length 500 mm
Support profile front left
6IN512-0
Support profile front right
6IN513-0
Support profile back right
6IN526-0
Support profile back left
6IN527-0
for solder frame with 500 mm length
4DKLE0-500-000
Movable support rail for frame
Center bar old version, length 500 mm
for supply of PCBs in Ersa soldering frame
old version! Please compare it with
the available system
330 mm working width
4ZH-330
400 mm working width
4ZH400
500 mm working width
4ZH500
Rail for frame
Center bar stainless steel, length 600 mm
Like 4ZH-330, 4ZH400, 4ZH500 - only rail
for solder frame with 600 mm length
330 mm working width
6ISK275-02
400 mm working width
6ISK275-03
500 mm working width
6ISK275-04
Mounting plate
for movable support. One sided PCB
holder
6IN490
4KLE00-420-000
Length 500 mm
4KLE00-500-000
Length 600 mm
4KLE00-600-000
Sidebar old version stainl. steel, length 420 mm
4KLE420-A
Center bar, length 420 mm
4DKLE0-420-000
Center bar old version, length 420 mm
old version! Please compare it with
the available system
4DKLE420-A
Sidebar old version stainl. steel, length 500 mm
old version! Please compare it with
the available system
6IN127
clip for center- and sidebar to rivet
on
6IN126
Blind rivet 4,0x4,9AL5 K. BER. 1,6 - 2,9
Length 420 mm
for solder frame with 420 mm length
clip for center- and sidebar to rivet
on
Clamping clip 65 mm, 3 finger (SS)
6IN490-1
Sidebar
old version! Please compare it with
the available system
4DKLE600
Clamping clip 130 mm 6 finger, (SS)
Center mounting plate
for movable support. two sided PCB
holder
4DKLE500-A
4KLE500-A
rivet for rivet on the clamping clip
6IN126 and 6IN127
6NI4.0X04.9B
screw-star handle M4x16 (SS)
for the clamping assembly of the Ersa
center- and sidebar
29548
Auxiliaries and Supplies
Unless specified otherwise in the product description, order numbers
refer to a packing unit (pu) of 1 piece.
Auxiliaries and Supplies
Figure
Description
Auxiliaries and Supplies
Order No.
Figure
Leak detection spray, 400 ml can
Description
120268
Epoxy glue Art.Nr. 071045600
Filter with screwed connection 5x1 mm
6X00034
filter housing for the residual oxygen
of different Ersa soldering machines
Spray 400 ml Molykote dry slide film
for lubrication at demandng sliding
applications. Temperature range
.-185 to +450 °C. not secreting resin,
high pressure resistance, ageing
resistance
6FIL-HL-01
Filter cartridge for Filter 6FIL-HL-01
77781
for the use in the filter hosuing
6FIL-HL-01 for the residual oxygen of
different Ersa soldering machines
Antifreeze can 30 Liter
for use in cold water - cooling
circulation as Algizid, antifreeze and
corrosion protection
Order No.
Solder wire LF Sn96,5Ag3Cu0,5 D 2 mm 4 kg
6ZT-SPRAY02
2 components glue for examplfe
for fixing the thermal sensor on the
measurement board
21
6FIL-HL-ZT01
O-Ring for Filter 6FL-HL-01
6ZT00167
for the transparent plunger of the
filter housing 6FIL-HL-01
6FIL-HL-ZT02
Hylomar M Universal seal 80 ml
for sealing the gasing caps of the
selective soldering machines
270257
Auxiliaries and Accessories
Figure
adipic acid in 1 kg can
powder for nozzle activation of wettable selective nozzles
89593
SILIC ADHESIVE E43 TUBE 90 cm3
high temperature silicon glue up to
200 °C
Description
Order No.
Reference Fixture
6X00028
Solder wire SnAg3,8Cu0,7 ø 2 mm, 4 kg
50273
Solder Wire Sn63Pb37 ø 2 mm, 4 kg
61662
Solder wire SN100CE-SnNi Dia. 2 mm 4 kg
104134
measurement and calibration board
for Ersa selective soldering machines.
390x 480 mm
6ISK47955141
Reference Fixture 350x350
measurement and calibration board
for Ersa selective soldering machines.
350x 350 mm
203532
Glass plate to verify Wave Set-Up
in order to measure the wetting
length Dimensions: 240 x 325 mm
4ZBGS0240x325
Glass plate to verify wave setup
"Size: 380 x 380 mm. Suitable for any
wave soldering machine. Made of
high temperature glass with 10 mm
grid spacing."
4ZBGS0380x380
Glass plate, heat resistant
Grid 300 x 300, black edge for
conveyor of selective solderinge
machines
84584
22
Auxiliaries and Supplies
Auxiliaries and Accessories
Figure
Description
Auxiliaries and Accessories
Order No.
All purpose pin puller
for cutting the conveyor chains
6ZT00189
100388
Mounting sheet for tools
tool holder for keeping the soldering
pot cleaning tools
100387
252141
Lock three.corner part 7 mm 2545.000
triangle key for opening special doors
6VERSCHLÜ2554
Light metal precision level
for diverse adjustments
for delivery of the tin testing to Ersa
in standardized form / size
6ISK714-05A
Pressing tool
for pressing dowl pins in nozzle
locking shafts
109687
with Ersa- Logo
Size M
47955
Size L
47954
heavy, fleecy quality
Men
127380
Women
127382
for the high temperature area
6HDSGLGEW-289
Sheet of glass
6VERSCHLÜ2531
Wrench for switch-cupboard
square key for opening special doors
213024
Service gants (pair), size M
243303
Key for control panel
electrical cabinet key
brush piece 100x 20 mm for example
to cleaning the wettable selective
nozzles
Protective gloves (pair)
247629
Tool for gasification ring
for opening the gasing caps of the
Ersa soldering machines
Order No.
Cotton gloves white
Solder mould
aluminum bowl for keeping solder during the exhaust of the soldering pot
Description
Mould for alloy analysis
Service and Maintenance Trolley
for Wave-/ Multiwave-/ and Dip Soldering machines. Service trolly
Including special lead-free coated
surfaces.
Figure
Cleaning brush stainless steel
6ZT00187
Chain rivet remover
for chains with plunger diameter over
3 mm
The Order-No. refers to a packing unit of 1 piece each, unless there is
specified another in the article description.
208659
for measureing the wettable length
at wave soldering machines and for
diverse setup work
6ISK47953002
Ersa product portfolio
Screen & Stencil Printer
VERSAPRINT screen printing systems with fully
integrated in-line post print inspection offer
unique cost and technology benefits. The revolutionary LIST camera offers an inspection beyond
compare: detection of paste on pad , print offset,
bridges and stencil blockages in in-line speed.
Reflow Soldering
Ersa reflow soldering systems convince by their
extraordinary thermal performance, highest machine availability and low operating costs. The Ersa
HOTFLOW 4 series has mastered to significantly
reduce the energy and N2 consumptionon a comparable performance level
Selective Soldering
As technology leader Ersa delivers perfect solutions for all selective soldering tasks: the scope
of configurations ranges from start-up to highend, from inline to cell production, from single to
multi wave soldering and from highest flexibility
to highest throughput and make the VERSAFLOW, ECOCELL and ECOSELECT systems the
ideal match for the demands of the users.
Wave Soldering
The cost-benefit ratio of wave soldering is still
outstanding. But the demands of the users differ
widely. Therefore Ersa offers an extensive range
of individually configurable systems, from basic
to high-end.
Automation
Ersa presents the collaborative ROBOPLACE, an
innovative automation solution based on a flexible
2-arm technology, which lifts the inline production
of PCBs for industry and automotive to the next
level.
Rework
For more the a decade more then 5000 users all
around the world benefit from the patented Ersa
IR rework technology. Besides their excellent
cost-benefit-relation Ersa systems have conquered their leading market position for their outstanding results even in demanding rework tasks.
23
Inspection SMT / BGA
No matter if a reworked BGA needs to be inspected or the parameters of a production line need
to be verified – ERSASCOPE inspection
systems for the damage free inspection of
covered solder joints have become the standard
in electronic productions.
Soldering and Desoldering
Ersa soldering and desoldering stations impress
by their compact size, high performance, energy
efficiency and low operating costs, since inexpensive exchange soldering tips are used. Being
the i-CON family’s flagship it offers the user 4
tools to master demanding soldering applications.
Solders, Solder wires & Fluxes
All about soldering - supplied by one source:
beneath special tools, soldering tools and temperature measuring devices Ersa also offers
operating supplies for the production and repair
of PCBs. Ersa solder wires contain only high quality raw materials and are manufactured
according to most modern standards to meet
all quality requirements.
Solder Fume Extraction
Ersa solder fume extractions are the efficient
and economic way to ensure clean PCBs an healthy breathing air. The big nozzles, which are
available in different shapes, efficiently extract
the solder fumes of an entire workspace.
Services/Employer Trainings
Beside the broad product range Ersa offers
comprehensive services like employer training
and qualification, machine and production process
audits, maintenance contracts, ramp-up support,
machine capability studies or online spare part catalogues. Tell us your needs - we find the
solution!
Ersa Webshop
The Ersa Webshop offers spare and wear parts for
Ersa soldering machines as well as tools, reworkand inspection systems.
Always up to date and
available 24/7!
www.ersashop.com
Electronics Production Equipment
Presence
135 countries
Worldwideinpresent.
Production plants/
subsidiaries
subsidiaries
Local agents
Other presence
Mexico
Kurtz Ersa, S.A. de C.V.
Felipe Angeles No. 52
Col. Bellavista Tacubaya
01140 México, D.F
México
from Mexico: 01 800 099 0357
from the US: 1 800 848 5628
from Germany: 0800 188 8932
info-kmx@kurtzersa.com
www.ersa.com
Ersa GmbH
Leonhard-Karl-Str. 24
97877 Wertheim/Germany
Asia
Ersa Asia Pacific
Unit 03-05, 8th Floor
One Island South
No. 2 Heung Yip Road
Wong Chuk Hang
Hong Kong
China
Phone +852 2331 2232
Fax: +852 2758 7749
info-eap@kurtzersa.com
www.ersa.com
China
Ersa Shanghai
Room 720, Tian Xiang Building
No. 1068 Mao Tai Rd.,
Shanghai 200336
China
Phone +86 213126 0818
Fax +86 215239 2001
info-eap@kurtzersa.com
www.ersa.com
Phone +49 9342 800-0
Fax +49 9342 800-127
info@ersa.de
www.ersa.com
Ersa France
Division de
Kurtz France S.A.R.L
15 rue de la Sucharde
21800 Chevigny Saint Sauveur
France
Phone +33 38056 6610
Fax +33 38056 6616
info-efr@kurtzersa.com
www.ersa.com
299 367 - 12/15 | subject to change | © Ersa GmbH
America
Ersa North America
1779 Pilgrim Road
Plymouth, WI 53073
USA
Phone +1 920 893 3772
from the US: 1 800 363 3772
Fax +1 920 893 3322
info-ena@kurtzersa.com
www.ersa.com