stainless steel engine mounts

Transcription

stainless steel engine mounts
ENGINE SUPPORT
STAINLESS STEEL
ENGINE MOUNTS
BELL 206A/B/L/L1/L3/L4/407
TOUGH CORROSION-RESISTANT ENGINE MOUNTS
KEY BENEFITS
• Manufactured from stainless steel for improved
durability
• Corrosion resistant
• Increased damage limit tolerances
• Parts are replaceable as a complete kit or on an
individual basis
KEY FEATURES
• Direct OEM replacement
• Installs using the same hardware and attachment
points as the OEM engine mounts
• Constructed using hollow rod sections and
machined fittings that are assembled using Hi-Lok
fasteners
• Existing shims are preserved between the fittings
and the airframe for engine alignment
www.dartaerospace.com
ENGINE SUPPORT
STAINLESS STEEL ENGINE MOUNTS
BELL 206A/B/L/L1/L3/L4/407
Made from stainless steel for improved durability, our new OEM
Replacement Engine Mounts were designed to last in harsh, corrosive
environments such as offshore operations. DART mounts are priced lower
than the OEM and reduce maintenance costs. Our mounts are direct
replacements for OEM engine mounts and can be individually replaced
as required to minimize operator investment and increase convenience.
DART mounts are available for Bell 206 and 407 aircraft. They are constructed using hollow rod sections and machined fittings that are assembled using Hi-lok fasteners. Parts are replaceable as a complete kit or
on an individual basis. The existing shims are preserved between the
fittings and the airframe for engine alignment.
SUB-COMPONENTS
PART NUMBER
PRODUCT
DESCRIPTION
KIT
WEIGHT
D206-811-011
206A/B Replacement Engine Mount
(a/c s/n 661 thru
671, 716 thru 2608,
39998 and sub)
1.9 lbs
0.86 kg
D206-811-013
206A/B Replacement Engine Mount
(a/c s/n 2609 and
sub)
D206-811-015
D206-811-017
D407-811-019
206L Replacement
Engine Mount
1.7 lbs
0.77 kg
Fwd
Leg Assy,
Fwd
LH and Leg Assy
RH
The kits consist of three bipod
type mounts located on the left,
right, and lower Fwd sides of
the engine.
Aft
Leg Assy,
LH and
RH
Leg
Assy,
LH and
RH
X
X
X
X
X
X
0.5 lb
0.23 kg
Mid Leg
Assy, LH
and RH
X
STC NUMBER
CANADA
SH14-17
USA
EASA
SR03465NY
Pending
The kits consist of three bipod
type mounts located on the
left, right, and Aft sides of the
engine.
X
The kits consist of three bipod
type mounts and one sway bar.
The bipod mounts are found on
the left, right, and Aft sides of
the engine. The sway bar is installed on the front of the engine
under the gear box.
X
X
X
A/C APPROVED
STC DESCRIPTION
206/A/A1/B/B1/L/L1/L3/L4/407
Replacement Engine Mounts
1270 Aberdeen Street, Hawkesbury, ON K6A 1K7, Canada
www.dartaerospace.com
F 1 613 632-4443
X
X
X
CONTACT US
 1 613 632-3336 / 1 800 556-4166
Bipod
Assy
X
Visit www.dartaerospace.com for more information on pricing, sub-component p/n and OEM equivalences.
APPROVAL
Sway
Bar
Assy
X
0.7 lb
0.32 kg
206L1/L3/L4
Replacement Engine 0.4 lb
Mount
0.18 kg
407 Replacement
Engine Mount
SPECIAL
COMMENTS
© 2016 DART Aerospace
E sales@dartaero.com
Printed in Canada, March 2016

Similar documents

BELL HELICOPTER

BELL HELICOPTER DART AEROSPACE 1270 Aberdeen Street Hawkesbury, ON K6A 1K7, Canada T 1 800 556-4166 / 1 613 632-3336 F 1 613 632-4443 E sales@dartaero.com

More information

BELL HELicoptEr - DART Aerospace

BELL HELicoptEr - DART Aerospace of excellence: HAWKesbURY (onTARIo, cAnADA): This center of excellence is co-located with the new DART headquarters. Originally established in British Columbia in 1975, and then relocated to Hawkes...

More information