TEST REPORT Stihl FS 510 C-EM

TEST REPORT
Stihl FS 510 C-EM
Test No.: 6365
OWNER OF THE TEST REPORT:
Manufacturer and applicant:
Andreas Stihl AG & Co. KG
Badstrasse 115
D- 71336 Waiblingen
www.stihl.de
6365 – Stihl FS 510 C-EM
Test results and evaluation
Brushcutter STIHL FS 510 C-EM with standard shaft
Standard version with brushcutter head or circular saw
Andreas Stihl AG & Co. KG; Badstrasse 115; 71336 Waiblingen
Test item
Application field
Test result
Evaluation
Brushcutter in the 2 – 3 kW power class for
professional use
Engine power
Speed at
P max = 2,4 kW
Md max bei 1,8 kW
Speed
Spec. fuel
consumption
Torque
9000 min-1
2,6 Nm
47 kW/l
5750 min-1
3,0 Nm
35 kW/l
NE
Fuel consumption
absolute / specific
At max. power
at max. torque
1,4 l/h
1,3 l/h
397 g/kWh
485 g/kWh
Exhaust emission
Complies with type approvals level II of the standard 2002/88 EG
+
o
Approval number: e1*97/68SH3-IIA*2010/26*0664*00
Max. noise development
FS 510 C-EM (Brushcutter)/
FS 510 C-EM (trimmer head)
at ear of operator
Idling
Full throttle, unloaded
81 / 81 dB(A)
106 / 102 dB(A)
-
Equivalent noise pressure level according to DIN EN ISO 22868: 103 / 102 dB(A)
Equivalent noise power level according to DIN EN ISO 22868: 114 / 113 dB(A)
(Mix: idling / full throttle)
Max. Vibration
FS 510 C-EM (Brushcutter)/
Idling
Full throttle, unloaded
Left handle
3,2 / 3,1 m/s²
2,7 / 3,0 m/s²
Right handle
3,0 /3,3 m/s²
2,7 / 4,3 m/s²
FS 510 C-EM (trimmer head)
o
Equivalent vibration total value according to DIN EN ISO 22867
left handle 3.0 / 3.0 m/s²; right handle 2.8 / 3.8 m/s²
Weight
Weight per unit power
FS 510 C-EM
Without cutting
attachment
4.3 kg/kW
2/5
With Brushcutter blade
350-3)
4.4 kg/kW
o
6365 – Stihl FS 510 C-EM
Operability / Handling
Control elements
Easy to reach and use; automatic resetting of the
ON/OFF switch
+
Machine start
Mechanical starting aid (Ergostart) to facilitate
engine start; with primer
+
Engine control
Electronic control, no adjustment screws
++
Tool replacement
Requires tools (locking pin)
o
Shaft/handlebar
no tools required to adjust shaft to work and
transport position
+
Tank filling
Fuel level of tank visible from outside
+
easy to adjust, very comfortable, padded belts
+
additional quick-release for the attachment
+
Spark plugs /
Cover removal
Easy access, tools required for removing cover
o
Angular gear
Maintenance free
+
Fixed by three bolts,
removal requires tools
easy, no tools required
low
o
Harness
Maintenance
Air filter
Cover
Cleaning
Soiling
+
o
Reliability
No defects during test
o
Operating manual
clear, well illustrated
o
Operator safety
GS-type examination test
DPLF Certificate no.: D-GS 11.102
Rating: ++ / + / o / - / --./.(o = Standard / NE= no evaluation, complies with tolerance value)
3/5
NE
6365 – Stihl FS 510 C-EM
Description and technical details
Motor
- Air-cooled single-cylinder two-stroke engine
³
- Engine displacement 51.6 cm ; bore 44.7 mm; stroke 32.9 mm
- Spark plug: NGK BPMR7A
Fuel: minimum octane number 90 RON (mixed lubrication 1:50) or two stroke special fuel with
“KWF Test”; Manufacturer's recommendation: Stihl MotoMix
Transmission
- Transmission shaft enclosed by shaft and seated in plastic liner
- Angular gear: gear ratio FS 510 C-EM 1:0.71
- Output shaft thread: M14 x 1.5 left
- Shaft 38 mm x 2.4 mm
- Angle shaft / out put shaft: 145°
Main dimensions and weights (measured values)
Length
Without cutting equipment
Width
Engine unit
300 mm
Height
Engine unit
265 mm
Fuel tank volume
Weight
1760 mm
0.99 l
Engine unit (empty weight, without tools and tool
protector)
4/5
10.2 kg
6365 – Stihl FS 510 C-EM
Test facility
Kuratorium für Waldarbeit und Forsttechnik, Gross-Umstadt
DLG-Testzentrum Technik & Betriebsmittel, Gross-Umstadt
Field test:
Waldarbeitsschule Kunsterspring
Revierförsterei Ehringshausen
Forstamt Lampertheim
Authors
P. Müßig, KWF, Gross-Umstadt
J. Albert, DLG, Gross-Umstadt
KWF-Test committee
Test committee „Forstgeräte und Werkzeuge“(“Equipment and tools”)
Chairman: Sebastian Paar, Ruhpolding
FPA/DLG-approval valid until November 2017
In acknowledgement of the results of the test carried out by the KWF the approved product is also
entitled to carry the following test marks:
Published by
DLG-Testzentrum Technik & Betriebsmittel
Max-Eyth-Weg 1
D-64823 Gross-Umstadt
Telephone: +49 069/24788-611
Fax: +49 069/24788-110
E-mail: J.Albert@dlg.org
Internet: www.dlg-test.de
ENTAM European Network for Testing of
Agricultural Machines
c/o ENAMA
Via Venafro, 5
I-00159 Rome
Telephone: +39 06 40860030
Fax: +39 06 4076264
E-mail: inf@entam.com
Internet: www.entam.com
Kuratorium für Waldarbeit und Forsttechnik e.V.
Forsttechnischer Prüfungsausschuss (FPA)
Spremberger Strasse 1
D-64823 Gross-Umstadt
Telephone: +49 06078/785-0
Fax: +49 06078/785-50
E-mail: Muessig@kwf-online.de
Internet: www.kwf-online.de
Supported by the Federal Ministry of Consumer Protection, Food and Agriculture per decision by the
German Bundestag and the State Forest Administrations
5/5