Har Zion Temple - Renkus

Loudspeaker System Recommendation
Har Zion Temple
Prepared for: Philadelphia Sound Production
Application Engineering
Renkus-Heinz, Inc.
5-20-2014
Contents
Recommendation ------------------------------------------------------------------------------------------------------------ 2-3
Equipment List ------------------------------------------------------------------------------------------------------------------ 4
Array Configuration ------------------------------------------------------------------------------------------------------------- 5
EASE mappings -------------------------------------------------------------------------------------------------------------- 6-7
Product Datasheets ----------------------------------------------------------------------------------------------- Following 8
Design Goals
Renkus-Heinz has been asked to recommend a sound reinforcement system for the Har Zion Temple.
Our goals for designing this system were to provide an intelligible and natural sounding speech reinforcement in a large Temple. The space will be used for light music so musicality, and adequate sound pressure levels are also a must. Of course this performance must be delivered evenly to all seats in the house.
Room Details
The room is about 60 feet wide, and 80 feet deep shaped almost like a diamond. The ceiling is about 27
feet high. The stage in the room extends inwards from the back wall about 23 feet and is 3 feet high. The
room was described as live.
Recommended Loudspeaker System
The recommended loud speaker system is a pair of ICL-FR-DUAL’s.
Loudspeaker mounting location
Due to mounting location limitations described in the recommendation page, the loudspeakers are mounted on the walls flanking the stage. They are about 35 feet away from the center of the room, 20 feet back
from the back of the stage and 6 feet high to the bottom of the array.
Optional Subwoofers
Low frequency energy should be handled by 2-4 IC215S-R depending on what type of program material
will be played back over the system. The subs should be installed under the stage, or wheeled out as necessary.
Understanding EASE Mappings in Appendix
The system has been designed with the aid of EASE, Enhanced Acoustic Simulator for Engineers, a product of the Ahnert-Feistel Media Group, GmbH, Berlin, Germany. EASE is the international standard for
sound-system design and prediction and has been proven accurate in thousands of successful sound system installations world-wide. For more on EASE and sound system prediction, please see AFMG’s website: http://ease.afmg.eu/
“System Coverage” maps show system coverage averaged over two octaves, at the frequency range indicated, of the seating areas at ear height. The mapping is predicted Direct Sound Pressure Level in dB. No
room effects are included. These maps do not represent how loud the system will get, but rather consistency of coverage.
The “Maximum SPL, A-Weighted” map shows the approximate maximum level the system would reach as
shown on an SPL meter set to read broad band, A-weighted, fast.
Important Disclaimer:
All simulations have been done with industry standard techniques and software using information supplied by others. They are believed to be accurate within normal tolerances for such simulations providing the data supplied was
accurate. Renkus-Heinz makes no guarantee that the final system will perform as simulated. Renkus-Heinz guarantees only that any Renkus-Heinz equipment will perform to its published specifications within normal industry toler2
ances. The above is a recommendation only and is not to be considered or represented as a design by RenkusHeinz.
WARNING! Hanging loudspeakers is a serious undertaking that should be done only by qualified and experienced personnel. Check with an Architect or Structural Engineer to verify any building attachment points.
Renkus-Heinz is not responsible for any non-Renkus-Heinz products or for any misuse of Renkus-Heinz
products.
Thank you for the opportunity of making this recommendation.
3
Appendix 1, Equipment List
Item
RH Part Number
Qty.
Main
ICL-FR-DUAL
2
Optional Subwoofers
IC215S-R
2-4
Caster wheels for subs
CSTRS-IC215
2-4
4
Appendix 2, Array configuration
5
Appendix 3, EASE Mappings
System Coverage at low frequencies, 100-400 Hz. Average
System Coverage at mid frequencies, 500-2000 Hz. average
6
System Coverage at high frequencies, 2,500-10,000 Hz. average
System Coverage, maximum SPL A-weighted
7
End of Recommendation
Product datasheets on following pages
8
Sensitivity:
8” (20 cm)
Freq. Range:
Max SPL:
8” (20 cm)
Horiz. Dispersion:
Vert. Opening Angles:
48” (122 cm)
44 1/4” (112.5 cm)
Aiming Angle:
Typical Throw:
Beam Control:
№. Transducers
-Each Module:
№. Amp. Channels:
Dimensions:
Weight:
7” (17.8 cm)
44 1/4” (112.5 cm)
95” (241.5 cm)
150° up to 3 kHz; 120° above 3 kHz
Five 6.5-inch cone transducers with neodymium magnets
Three 1-inch HF titanium nitride compression drivers
8 per module
ICL-FR: 48” H x 8” W x 7” D (121.5 cm x 20. cm x 17.8 cm)
ICL-FR-DUAL: 95” H x 8” W x 7” D (2431.5cm x 20. cm x 17.8 cm)
ICL-FR: 61 Lbs (27.7 Kg)
ICL-FR-DUAL: 122 Lbs (55.4 Kg)
Finnish Birch with perforated steel grille
Analog Audio: 2 inputs (primary & secondary), Phoenix 3-pin connectors (looping 3-in, 3-out)
CobraNet: Dual RJ45 connectors (for CAT 5 copper cable)
AES/EBU: Phoenix connector
Mute button
Up & Down Output Level buttons
10 dB pad (on Analog 1 input)
Push-To-Reset circuit breaker
Preset Configuration Selector (10 configurations)
Gain, Mute, On/Standby, Input Selection;
Compression, 8-Band Parametric EQ, Shelving & Rolloff Filters,
Delay, Preset Configuration Selection
Status Indicators:
Power, Signal, Overdrive, Thermal, Mute, Input Pad, Preset Configuration Readout
Power Connector:
IEC power connector
Finish:
Network Digital Format:
DSP/AMPLIFIER
Type:
Input Impedance:
Max Input:
Power Rating:
Freq. Range:
THD Distortion:
Hum & Noise:
Power Required:
(per module)
New Directions for Live Sound
Magnificent architecture adds excitement and allure to any live event. But it can also create
acoustical problems. IC Live arrays use advanced digital beam steering technology to deliver
impeccable sound while staying in the background visually.
IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that
blend into any environment. Individual driver control maximizes the acoustical advantages of this design.
The result is unsurpassed vertical pattern control – essential for delivering intelligible speech in reverberant spaces. IC Live beams can be steered up or down while the array remains vertical – and nearly invisible.
ICL-FR: 20°, 25° and 30°
ICL-FR-DUAL: 5°, 10°, 15° and 20°
Adjustable from -30° to +30°
ICL-FR: 80 Ft. (25 meters)
ICL-FR-DUAL: 160 Ft. (50 meters)
ICL-FR: Effective down to 800 Hz
ICL-FR-DUAL: Effective down to 400 Hz
Enclosure:
Computer Controls:
47” (119.5 cm)
ICL-FR: 102 dB pgm, 105 dB peak @ 100 Ft. (30.5 m),
ICL-FR-DUAL: 105 dB pgm, 108 dB peak
(3-octave bandwidth centered at 2 kHz)
Metric M10 attachment points and hinge kits
Controls (Rear Mounted):
Digitally SteerableLine Arrays
80 Hz to 20 kHz
Hardware:
Inputs:
IC Live
1.0 V (for rated power output)
IC Live arrays are also powerful. Their 6.5 inch neodymium low frequency transducers and 1 inch throat titanium nitrate coated high frequency drivers produce surprisingly high sound levels for their size. They are
equally at home delivering a quiet sermon in a reverberant cathedral, cutting through the crowd noise in a
gym during a close basketball game or shaking the walls with rock music in a club.
ICL-FR
ICL-FR-DUAL
(For Permanent Installations)
Transparent Solutions
• Houses of Worship: traditional & modern.
• Transport Terminals: train stations, airports, etc.
• Stadiums & Arenas: lobbies & forecourts.
• Convention Centers, warehouses, gymnasiums, etc.
• Museums: lobbies, galleries, etc.
• Performing Arts Centers: vocal/orchestral “lift,” lobbies, etc.
• Any highly reverberant environment where powerful, enjoyable music and/or intelligible
speech are as important as the architectural design.
POWERFUL • MUSICAL • INTELLIGIBLE
Adaptable, Articulate, Invisible
Digital beam steering puts IC Live output where it belongs: on the audience, not walls or ceilings. Computer software lets you define the opening angles for as many as four sonic beams from each IC Live
array module (up to 8 beams when stacked) and aim them up or down. Meanwhile, the slim enclosure
stays vertical and inconspicuous. Two ICL-FR modules can be stacked for even tighter control and higher
output.
Powerful, Accurate, Musical
Standard finish: white paint
Optional finishes: black and custom color paint, weather resistant
16 or 24 bit PCM; 48 or 96 kHz sample rate; selectable network latency.
8-channel, Class D amplifier/DSP processor
>20K Ohm balanced differential
+24 dBu (Pad in);+14 dBu @ 1V sensitivity (Pad out)
100 Watts RMS per channel, 150 Watts Burst
+ 3, - 3 dB, 80 Hz to 20 kHz
< 0.05% typical
<100 dB (A weighted)
Universal 90/260 VAC, 50/60Hz.
24 VA Idle; 500 VA @ rated output per module
(250 ma Idle, 4.2 Amps @ RPO at 120 V)
Note: All analog inputs and outputs comply with AES Standard 48-2005 on interconnecting, grounding and shielding.
Renkus-Heinz, Inc., 19201 Cook Street, Foothill Ranch, CA 92610-3501, USA
Tel: 949-588-9997 • Fax: 949-588-9514 • Sales@renkus-heinz.com • www.renkus-heinz.com
RH648 Rev B October 2010
Iconyx transparent technology controls sound with DSP intelligence, not cumbersome brute-force techniques. Multi-channel class D digital amplifiers with Integral DSP engines control every single array element with programmable precision. High-current audiophile output stages power each light, efficient
transducer in the Iconyx array individually. Even at 100 feet, SPL is an impressive105 dB (108 dB when
stacked). Output is flat from 80 Hz to 20 kHz. Low frequency energy can be extended to 40 Hz or below
with matching subwoofers.
RHAON Empowered
All Iconyx ICL-FR arrays are equipped with RHAON, the Renkus-Heinz Audio Operations Network.
RHAON offers multi-channel digital audio distribution, user controlled DSP, user selectable preset configurations and comprehensive remote system management and control - all using standard Ethernet hardware and cabling.
Easy To Install
IC Live ICL-FR installation models are equipped with attachment points making them easy to suspend
from the ceiling. Hinged mounting hardware is available for wall mounting. It allows the cabinet to be
turned away from the wall for easy signal and power connections and then locked into place against the
wall after installation.
© 2010 Renkus-Heinz Inc. reserves the right to change any product specification without prior notification.
ICL-F Array
ICL-F-DUAL Array
MUSICAL & NATURAL
CLEARLY INTELLIGIBLE
Intimate Sound for Imposing Spaces
"Up close and personal" communication happens when sound arriving directly
from the source, whether it's a live person or a loudspeaker, is much louder
than sound that's reflected off the walls, windows, floor and ceiling. As you
move farther away from the source, the direct sound loses volume twice as
fast as the reflected sound. This is why in very reverberant spaces, it can be
hard to understand someone speaking in a normal tone of voice more than a
couple of arm's lengths away.
IC Live digitally steerable arrays produce tightly focused, precisely aimed
beams of acoustic energy that maintain their intensity over long distances. Because most of the highly directional sound from an IC Live digitally steerable
array is focused on the listeners, very little is left to bounce around the room
and confuse the ears. That's how Iconyx IC Live arrays let you sit hundreds of
feet away from the speaker or musicians and still hear the words and music as
if they were right "in your face."
ARRAY CONFIGURATION SOFTWARE
RHAON is the culmination of more than 20 years
experience integrating electronics with loudspeakers. RHAON makes it easy to connect, control
and monitor multiple ICL-FR arrays and a mixture
of other Renkus-Heinz powered loudspeakers using standard Ethernet cabling and switches. On one network, you can distribute multi-channel digital
audio with CobraNet, control array-specific DSP functions, and supervise the
entire loudspeaker system from a centrally location computer.
Powerful Algorithms, Intuitive Interface
RHAON’s comprehensive network capabilities make it easy to add one-touch
presets, zone control and life safety functions to any ICL-FR system.
BeamWare display of a tightly focused ICL-FR digitally steerable array.
Notice how the beam distributes sound evenly over the audience area.
RHAON gives you maximum control of:
• Real time digital audio distribution over standard Ethernet using proven
CobraNet technology to deliver multiple channels of high quality digital audio
over a single CAT 5 cable.
• A powerful DSP inside each ICL-FR array on the network. Adjust eight
bands of parametric EQ, high and low frequency shelving filters, input level
control, muting and delay in real time; store up to 10 preset configurastions.
The software algorithms that shape and aim the output of an Iconyx array are
complex, but the user interface is intuitively simple. Renkus-Heinz BeamWare,
a Windows application, lets you model the audience area and then choreograph the beams until the coverage is optimized. Beamware allows you to
choose the number of beams (up to 4 in an ICL-FR or 8 in a stacked array),
their aiming points and sharpness, and their relative level.
Different configurations can also be stored as presets allowing users to quickly
and easily adjust the sound coverage to accomodate different room setups and
configurations by push button selection of the desired setup.
MAXIMUM CONTROL
• Our Beamware software with its ability to individually shape, steer and
control multiple sonic beams to cover almost any audience area.
BeamWare display showing one application of the multi-beam capability
of ICL-FR Iconyx digitally steerable arrays.
Notice the smooth coverage of both the main floor and balcony areas.
• Monitoring and supervisory functions. RHAON tracks critical operating parameters such as signal clipping, amplifier output voltage and current and
temperature with automatic alert functions.
RHAON is not pre-certified as a life-safety system, but it has been designed
to meet the requirement of most local authorities. Redundant signal paths
and programmable priority override functions are built in. Continual monitoring of each networked loudspeaker, with automatic operator alert and logging
functions, help you make sure the system is available when it’s most urgently
needed.
The improvement in sound quality and clarity provided by Iconyx digitally steerable arrays over conventional loudspeaker systems is truly remarkable, especially in highly reverberant rooms. The coverage patterns of conventional
loudspeaker systems bounces too much energy off the walls and ceiling which
interferes with intelligibility.
High Performance Woofers and Drivers
IC Live transducers were chosen for their
light weight and high performance. Both
the low frequency woofers and the high
frequency drivers feature Neodymium
magnets known for their high efficiency
and low weight.
Low frequency woofer
with neodymium magnet
A typical ICL-FR loudspeaker
array connection window.
Notice the wide range
of inputs available.
Individual Control windows for each
ICL-FR array allow easy adjustment of
EQ and Shelving, Delay, Etc.
The high frequency drivers have a titanium coated dome which dramatically
increases stiffness for improves transient response and reduced intermodulation distortion. An edge wound copper
clad aluminum voice coil wound on
Nomex completes the diaphragm assembly.
Page 2
Multiple Presets, Easy Selection
ICL-FR can store up to 10 different
configurations in the loudspeakers
DSP memory. For example, you
might optimize one configuration
for small events on the main audience area, and another for larger
occasions with listeners in the balcony. Once the configurations are
stored, it’s easy to switch from one
to another. Up/Down buttons and a
readout on the rear panel allow an
operator to scroll through the available presets. This function can also be performed
remotely from the central control computer
or by means of a remote control panel if a
central computer is not being used.
IC-RC1 Remote Control
The brain of each ICL-FR module is
the 8-channel DSP processor / amplifier developed specifically for Iconyx. It
not only performs the complex digital signal processing needed to shape and aim the
beams without creating side lobes, but also provides 8 channels of Class D digital amplification. Its
audiophile, high-current output section and integral DSP engine control
each high-performance coaxial transducer with total precision. The Class
D digital amplifiers are lightweight, efficient and cool: no fan noise. Fully
regulated switching power supplies operate from 90 to 260 Volts, 50/60 Hz
AC.
ICL-F-R arrays offer a variety of input options. Dual analog inputs are standard equipment along with a choice of two digital inputs, Multi-channel digital audio signal distribution via CobraNet and a serial AES/EBU digital
input.
EASE Intelligibility map of a typical reverberant worship facility ( 3 to 3.5 Sec. RT60)
with an Iconyx array placed at the side of the chancel area.
The green areas indicate good to excellent intelligibility
across the bulk of the audience area.
ICL-FR & ICL-FR-DUAL
RHAON also allows you to adjust the output level, EQ, high and low frequency shelving, muting and delay of ICL-FR arrays from your computer.
Multiple Input Options
Individual Supervise windows for each
ICL-FR loudspeaker array help to identify problems and take remedial action.
High frequency driver with neodymium
magnet and titanium nitride coated dome
The beams can be easily adjusted from your computer after the Iconyx
array is installed.
Advanced DSP Processor / Amplifier
EASE Intelligibility map of a typical reverberant worship facility ( 3 to 3.5 Sec. RT60) with a
conventional 2-way loudspeaker suspended above the altar. Dark green areas indicate
9% to 12% ALcons or fair to barely acceptable intelligibility; the blue areas indicate
poor to unacceptable intelligibility.
The high-power 6.5 inch woofers have a
1.5 inch copper voice coil and a stiff cone
with a soft supple surround.
The software algorithms that shape and aim the output of an Iconyx array
are complex, but the user interface is intuitively simple. Our BeamWare
software, an integral part of RHAON, lets you model the audience area,
then drag and drop beams until coverage is optimized. BeamWare then
calculates a set of FIR (Finite Infinite Response) filters that control the
array ‘s beams. At installation time, simply download the full set of FIR filters from your computer to the IC Series modules over the Ethernet network.
ICL-FR & ICL-FR-DUAL
Page 3
MUSICAL & NATURAL
CLEARLY INTELLIGIBLE
Intimate Sound for Imposing Spaces
"Up close and personal" communication happens when sound arriving directly
from the source, whether it's a live person or a loudspeaker, is much louder
than sound that's reflected off the walls, windows, floor and ceiling. As you
move farther away from the source, the direct sound loses volume twice as
fast as the reflected sound. This is why in very reverberant spaces, it can be
hard to understand someone speaking in a normal tone of voice more than a
couple of arm's lengths away.
IC Live digitally steerable arrays produce tightly focused, precisely aimed
beams of acoustic energy that maintain their intensity over long distances. Because most of the highly directional sound from an IC Live digitally steerable
array is focused on the listeners, very little is left to bounce around the room
and confuse the ears. That's how Iconyx IC Live arrays let you sit hundreds of
feet away from the speaker or musicians and still hear the words and music as
if they were right "in your face."
ARRAY CONFIGURATION SOFTWARE
RHAON is the culmination of more than 20 years
experience integrating electronics with loudspeakers. RHAON makes it easy to connect, control
and monitor multiple ICL-FR arrays and a mixture
of other Renkus-Heinz powered loudspeakers using standard Ethernet cabling and switches. On one network, you can distribute multi-channel digital
audio with CobraNet, control array-specific DSP functions, and supervise the
entire loudspeaker system from a centrally location computer.
Powerful Algorithms, Intuitive Interface
RHAON’s comprehensive network capabilities make it easy to add one-touch
presets, zone control and life safety functions to any ICL-FR system.
BeamWare display of a tightly focused ICL-FR digitally steerable array.
Notice how the beam distributes sound evenly over the audience area.
RHAON gives you maximum control of:
• Real time digital audio distribution over standard Ethernet using proven
CobraNet technology to deliver multiple channels of high quality digital audio
over a single CAT 5 cable.
• A powerful DSP inside each ICL-FR array on the network. Adjust eight
bands of parametric EQ, high and low frequency shelving filters, input level
control, muting and delay in real time; store up to 10 preset configurastions.
The software algorithms that shape and aim the output of an Iconyx array are
complex, but the user interface is intuitively simple. Renkus-Heinz BeamWare,
a Windows application, lets you model the audience area and then choreograph the beams until the coverage is optimized. Beamware allows you to
choose the number of beams (up to 4 in an ICL-FR or 8 in a stacked array),
their aiming points and sharpness, and their relative level.
Different configurations can also be stored as presets allowing users to quickly
and easily adjust the sound coverage to accomodate different room setups and
configurations by push button selection of the desired setup.
MAXIMUM CONTROL
• Our Beamware software with its ability to individually shape, steer and
control multiple sonic beams to cover almost any audience area.
BeamWare display showing one application of the multi-beam capability
of ICL-FR Iconyx digitally steerable arrays.
Notice the smooth coverage of both the main floor and balcony areas.
• Monitoring and supervisory functions. RHAON tracks critical operating parameters such as signal clipping, amplifier output voltage and current and
temperature with automatic alert functions.
RHAON is not pre-certified as a life-safety system, but it has been designed
to meet the requirement of most local authorities. Redundant signal paths
and programmable priority override functions are built in. Continual monitoring of each networked loudspeaker, with automatic operator alert and logging
functions, help you make sure the system is available when it’s most urgently
needed.
The improvement in sound quality and clarity provided by Iconyx digitally steerable arrays over conventional loudspeaker systems is truly remarkable, especially in highly reverberant rooms. The coverage patterns of conventional
loudspeaker systems bounces too much energy off the walls and ceiling which
interferes with intelligibility.
High Performance Woofers and Drivers
IC Live transducers were chosen for their
light weight and high performance. Both
the low frequency woofers and the high
frequency drivers feature Neodymium
magnets known for their high efficiency
and low weight.
Low frequency woofer
with neodymium magnet
A typical ICL-FR loudspeaker
array connection window.
Notice the wide range
of inputs available.
Individual Control windows for each
ICL-FR array allow easy adjustment of
EQ and Shelving, Delay, Etc.
The high frequency drivers have a titanium coated dome which dramatically
increases stiffness for improves transient response and reduced intermodulation distortion. An edge wound copper
clad aluminum voice coil wound on
Nomex completes the diaphragm assembly.
Page 2
Multiple Presets, Easy Selection
ICL-FR can store up to 10 different
configurations in the loudspeakers
DSP memory. For example, you
might optimize one configuration
for small events on the main audience area, and another for larger
occasions with listeners in the balcony. Once the configurations are
stored, it’s easy to switch from one
to another. Up/Down buttons and a
readout on the rear panel allow an
operator to scroll through the available presets. This function can also be performed
remotely from the central control computer
or by means of a remote control panel if a
central computer is not being used.
IC-RC1 Remote Control
The brain of each ICL-FR module is
the 8-channel DSP processor / amplifier developed specifically for Iconyx. It
not only performs the complex digital signal processing needed to shape and aim the
beams without creating side lobes, but also provides 8 channels of Class D digital amplification. Its
audiophile, high-current output section and integral DSP engine control
each high-performance coaxial transducer with total precision. The Class
D digital amplifiers are lightweight, efficient and cool: no fan noise. Fully
regulated switching power supplies operate from 90 to 260 Volts, 50/60 Hz
AC.
ICL-F-R arrays offer a variety of input options. Dual analog inputs are standard equipment along with a choice of two digital inputs, Multi-channel digital audio signal distribution via CobraNet and a serial AES/EBU digital
input.
EASE Intelligibility map of a typical reverberant worship facility ( 3 to 3.5 Sec. RT60)
with an Iconyx array placed at the side of the chancel area.
The green areas indicate good to excellent intelligibility
across the bulk of the audience area.
ICL-FR & ICL-FR-DUAL
RHAON also allows you to adjust the output level, EQ, high and low frequency shelving, muting and delay of ICL-FR arrays from your computer.
Multiple Input Options
Individual Supervise windows for each
ICL-FR loudspeaker array help to identify problems and take remedial action.
High frequency driver with neodymium
magnet and titanium nitride coated dome
The beams can be easily adjusted from your computer after the Iconyx
array is installed.
Advanced DSP Processor / Amplifier
EASE Intelligibility map of a typical reverberant worship facility ( 3 to 3.5 Sec. RT60) with a
conventional 2-way loudspeaker suspended above the altar. Dark green areas indicate
9% to 12% ALcons or fair to barely acceptable intelligibility; the blue areas indicate
poor to unacceptable intelligibility.
The high-power 6.5 inch woofers have a
1.5 inch copper voice coil and a stiff cone
with a soft supple surround.
The software algorithms that shape and aim the output of an Iconyx array
are complex, but the user interface is intuitively simple. Our BeamWare
software, an integral part of RHAON, lets you model the audience area,
then drag and drop beams until coverage is optimized. BeamWare then
calculates a set of FIR (Finite Infinite Response) filters that control the
array ‘s beams. At installation time, simply download the full set of FIR filters from your computer to the IC Series modules over the Ethernet network.
ICL-FR & ICL-FR-DUAL
Page 3
Sensitivity:
8” (20 cm)
Freq. Range:
Max SPL:
8” (20 cm)
Horiz. Dispersion:
Vert. Opening Angles:
48” (122 cm)
44 1/4” (112.5 cm)
Aiming Angle:
Typical Throw:
Beam Control:
№. Transducers
-Each Module:
№. Amp. Channels:
Dimensions:
Weight:
7” (17.8 cm)
44 1/4” (112.5 cm)
95” (241.5 cm)
150° up to 3 kHz; 120° above 3 kHz
Five 6.5-inch cone transducers with neodymium magnets
Three 1-inch HF titanium nitride compression drivers
8 per module
ICL-FR: 48” H x 8” W x 7” D (121.5 cm x 20. cm x 17.8 cm)
ICL-FR-DUAL: 95” H x 8” W x 7” D (2431.5cm x 20. cm x 17.8 cm)
ICL-FR: 61 Lbs (27.7 Kg)
ICL-FR-DUAL: 122 Lbs (55.4 Kg)
Finnish Birch with perforated steel grille
Analog Audio: 2 inputs (primary & secondary), Phoenix 3-pin connectors (looping 3-in, 3-out)
CobraNet: Dual RJ45 connectors (for CAT 5 copper cable)
AES/EBU: Phoenix connector
Mute button
Up & Down Output Level buttons
10 dB pad (on Analog 1 input)
Push-To-Reset circuit breaker
Preset Configuration Selector (10 configurations)
Gain, Mute, On/Standby, Input Selection;
Compression, 8-Band Parametric EQ, Shelving & Rolloff Filters,
Delay, Preset Configuration Selection
Status Indicators:
Power, Signal, Overdrive, Thermal, Mute, Input Pad, Preset Configuration Readout
Power Connector:
IEC power connector
Finish:
Network Digital Format:
DSP/AMPLIFIER
Type:
Input Impedance:
Max Input:
Power Rating:
Freq. Range:
THD Distortion:
Hum & Noise:
Power Required:
(per module)
New Directions for Live Sound
Magnificent architecture adds excitement and allure to any live event. But it can also create
acoustical problems. IC Live arrays use advanced digital beam steering technology to deliver
impeccable sound while staying in the background visually.
IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that
blend into any environment. Individual driver control maximizes the acoustical advantages of this design.
The result is unsurpassed vertical pattern control – essential for delivering intelligible speech in reverberant spaces. IC Live beams can be steered up or down while the array remains vertical – and nearly invisible.
ICL-FR: 20°, 25° and 30°
ICL-FR-DUAL: 5°, 10°, 15° and 20°
Adjustable from -30° to +30°
ICL-FR: 80 Ft. (25 meters)
ICL-FR-DUAL: 160 Ft. (50 meters)
ICL-FR: Effective down to 800 Hz
ICL-FR-DUAL: Effective down to 400 Hz
Enclosure:
Computer Controls:
47” (119.5 cm)
ICL-FR: 102 dB pgm, 105 dB peak @ 100 Ft. (30.5 m),
ICL-FR-DUAL: 105 dB pgm, 108 dB peak
(3-octave bandwidth centered at 2 kHz)
Metric M10 attachment points and hinge kits
Controls (Rear Mounted):
Digitally SteerableLine Arrays
80 Hz to 20 kHz
Hardware:
Inputs:
IC Live
1.0 V (for rated power output)
IC Live arrays are also powerful. Their 6.5 inch neodymium low frequency transducers and 1 inch throat titanium nitrate coated high frequency drivers produce surprisingly high sound levels for their size. They are
equally at home delivering a quiet sermon in a reverberant cathedral, cutting through the crowd noise in a
gym during a close basketball game or shaking the walls with rock music in a club.
ICL-FR
ICL-FR-DUAL
(For Permanent Installations)
Transparent Solutions
• Houses of Worship: traditional & modern.
• Transport Terminals: train stations, airports, etc.
• Stadiums & Arenas: lobbies & forecourts.
• Convention Centers, warehouses, gymnasiums, etc.
• Museums: lobbies, galleries, etc.
• Performing Arts Centers: vocal/orchestral “lift,” lobbies, etc.
• Any highly reverberant environment where powerful, enjoyable music and/or intelligible
speech are as important as the architectural design.
POWERFUL • MUSICAL • INTELLIGIBLE
Adaptable, Articulate, Invisible
Digital beam steering puts IC Live output where it belongs: on the audience, not walls or ceilings. Computer software lets you define the opening angles for as many as four sonic beams from each IC Live
array module (up to 8 beams when stacked) and aim them up or down. Meanwhile, the slim enclosure
stays vertical and inconspicuous. Two ICL-FR modules can be stacked for even tighter control and higher
output.
Powerful, Accurate, Musical
Standard finish: white paint
Optional finishes: black and custom color paint, weather resistant
16 or 24 bit PCM; 48 or 96 kHz sample rate; selectable network latency.
8-channel, Class D amplifier/DSP processor
>20K Ohm balanced differential
+24 dBu (Pad in);+14 dBu @ 1V sensitivity (Pad out)
100 Watts RMS per channel, 150 Watts Burst
+ 3, - 3 dB, 80 Hz to 20 kHz
< 0.05% typical
<100 dB (A weighted)
Universal 90/260 VAC, 50/60Hz.
24 VA Idle; 500 VA @ rated output per module
(250 ma Idle, 4.2 Amps @ RPO at 120 V)
Note: All analog inputs and outputs comply with AES Standard 48-2005 on interconnecting, grounding and shielding.
Renkus-Heinz, Inc., 19201 Cook Street, Foothill Ranch, CA 92610-3501, USA
Tel: 949-588-9997 • Fax: 949-588-9514 • Sales@renkus-heinz.com • www.renkus-heinz.com
RH648 Rev B October 2010
Iconyx transparent technology controls sound with DSP intelligence, not cumbersome brute-force techniques. Multi-channel class D digital amplifiers with Integral DSP engines control every single array element with programmable precision. High-current audiophile output stages power each light, efficient
transducer in the Iconyx array individually. Even at 100 feet, SPL is an impressive105 dB (108 dB when
stacked). Output is flat from 80 Hz to 20 kHz. Low frequency energy can be extended to 40 Hz or below
with matching subwoofers.
RHAON Empowered
All Iconyx ICL-FR arrays are equipped with RHAON, the Renkus-Heinz Audio Operations Network.
RHAON offers multi-channel digital audio distribution, user controlled DSP, user selectable preset configurations and comprehensive remote system management and control - all using standard Ethernet hardware and cabling.
Easy To Install
IC Live ICL-FR installation models are equipped with attachment points making them easy to suspend
from the ceiling. Hinged mounting hardware is available for wall mounting. It allows the cabinet to be
turned away from the wall for easy signal and power connections and then locked into place against the
wall after installation.
© 2010 Renkus-Heinz Inc. reserves the right to change any product specification without prior notification.
ICL-F Array
ICL-F-DUAL Array
IC Live
Subwoofers
NewDirectionsforLiveEventProduuctions
Magnificent architectures adds excitement and allure to any live event. But it can also create
acoustical problems. Iconyx IC Live digitally steerable array systems use advanced digital beam
steering technology to deliver impeccable sound while staying in the background visually. IC215S
Series subwoofers are perfect companions to Iconyx IC Live arrays. Their dual 15-inch subwoofers
deliver outstanding low frequency impact with a high-order bandpass design that maximizes the efficiency of its cutting edge woofer technology and Class D amplifier.
IC215S series subwoofers are available in two versions, one designed expressely for portable use
and the other for permanent installations. Both versions are fully integrated into the RHAON
(Renkus-Heinz Audio Operations Network) for flexible analog and digital audio signal distribution.
Four configurations, with or without subwoofers, provide easily scalable systems that set up quickly
in portable applications. An interlocking hardware system assures solid, stable arrays.
IC215S
SeriesSubwoofers
IC215S-R
IC215S-FR
TransparentSolutions
• Corporate Events
• Live Concerts
• Political Rallies
• Theatrical Productions.
• Museums: lobbies, galleries, etc.
• Resorts, Theme Parks
• Any environment where enjoyable music and/or intelligible speech are critical
POWERFUL • MUSICAL • PORTABLE
Adaptable,Articulate,Invisible
The IC215S series subwoofers were designed to provide both acoustical and structural support for
Iconyx Live digitally steerable line array systems. Digital beam steering puts Iconyx Live output
where it belongs: on the audience, not walls or ceilings. One-touch presets or computer software let
you define as many as four sonic beams from each IC Live array module (up to 8 beams when
stacked), and aim them up or down.
Powerful,AccurateSub-BassPerformance
With 1700 Watts of Class D power driving a pair of high-output 15-inch woofers, IC215S seriers subwoofers can produce peaks of 136 dB SPL. Low frequency output extends to 43 Hz, providing a
solid foundation for any musical program material. The 15 inch woofers feature a high excursion surround and suspension system with a double silicon spider to assure linear travel even at extremely
high output levels.
Portable,Scalable,Versatile
One or two IC215S series subwoofers can be added to any IC Live array. In portable systems the
subwoofers can act as tall or wide bases for the full range digitally steered line arrays using the interlocking hardware system. IC215S-FR installation models are available in a wide range of custom
colors, can be floor mounted or easily suspended from built in attachment points.
RHAONEmpowered
Like the full range IC Live line array, the IC215S series subwoofers are equipped with RHAON.
RHAON provides a full set of remote control and supervision functions, along with CobraNet multichannel digital audio distribution.
© 2009 Renkus-Heinz Inc. reserves the right to change any product specification without prior notification.
Dual IC215S-R subwoofers
shown with stacked IC Live Arrays
IC215SSubwoofer
TechnicalSpecs
Sensitivity: 1.4 V (for rated power output)
Freq. Range: 43 Hz to 100 Hz
Max SPL: 133 dB program, 136 dB peak,
№. Transducers: Two model SSL15-14, 15” cone woofers, 800 Watts
program at 4 Ohms (each)
Dimensions: 44.5” H x 20” W x 24” D (113 cm x 50.8 cm x 61 cm)
Weight: 206 Lbs (93.4 Kg)
24”
20”
Power Required: 90/136 V or 180/260 V AC, 50/60Hz. 13 Amps @ 120 V, 6.5
Amps at 240 V
Hardware:
IC215S-R: Aeroquip Flytrack, Handles, Casters
!C215S-FR: Universal Mounting Hardware
Enclosure: Finnish Birch, perforated steel grille
Inputs: Analog Audio Input 1: Looping XLR (female in, male out)
Analog Audio Input 2: Phoenix 6-pin (looping 3-in, 3-out)
CobraNet: Dual RJ45 connectors (for CAT 5 copper cable)
AES/EBU: Phoenix connector
44.5”
Controls (Rear Mounted): Power On/Off, Push-To-Reset circuit breakers
Mute button; Up & Down Output Level push buttons; 10 dB
Input pad (on Analog 1 input)
Computer Controls: Gain, Mute, On/Standby, Input Selection; Compression, 9Band Parametric EQ,
Shelving & Rolloff Filters, Delay,
IC215S-R
Status Indicators: Power, Signal, Overdrive, Thermal, Mute, Input Pad
Power Connector: Powercon locking connector
Finish:
IC215S-R: Black paint
IC215S-FR: White paint or custom color paint
Weather resistant (black TuffTex)
Network Digital Format: 16, 20 or 24 bit PCM; 48 or 96 kHz sample rate; selectable
network latency
24”
20”
PM-2LR AMPLIFIER
Type: Class D amplifier/DSP processor
Power Rating: 2 x 850 Watts RMS, 950 W Program
THD Distortion: < 0.05% typical
Hum & Noise: <100 dB (A weighted)
44.5”
Note: All analog inputs and outputs comply with AES Standard 45-2005 on interconnecting,
grounding and shielding.
IC215S-FR
Renkus-Heinz, Inc., 19201 Cook Street, Foothill Ranch, CA 92610-3501, USA
Tel: 949-588-9997 • Fax: 949-588-9514 • sales@renkus-heinz.com • www.renkus-heinz.com
RH 632 November 2009
LIMITED WARRANTY
LIMITED WARRANTY
Renkus-Heinz warrants its products to be free from defects in material and workmanship for
a period of six ( 6 ) years from the date of original purchase from Renkus-Heinz, except for the
“WR” ( Weather Resistant ) models. “WR” models because of their exposure to the elements
carry a 3-year Limited Warranty. This warranty is extended to the original purchaser and all
subsequent owners, provided a copy of the original dated bill of sale is presented when
service is requested under warranty.
How to obtain service under this warranty
If your Renkus-Heinz product should require service, write, phone, fax or email us. See info on
the rear page. We will either direct you to a local service agency or provide you with a
Return Authorization ( RA ) number so that you can ship the product to our factory. Do not ship
WKHSURGXFWWRXVZLWKRXW¿UVWREWDLQLQJD5$QXPEHU3ODFHWKH5$QXPEHURQDOOER[HVUHWXUQHG
to the factory.
Merchandise returned to us for service under warranty must be accompanied by a copy of the
original bill of sale, and shipped prepaid. You are responsible for transporting your product to
our factory. We will pay the return shipping charges on all products repaired under warranty.
Failures not covered by this warranty
This warranty covers defects in manufacture only. It does not cover:
GDPDJHFDXVHGE\DFFLGHQWPLVXVHDEXVHSURGXFWPRGL¿FDWLRQRUQHJOHFW
2) damage incurred during shipment ( you must claim these damages from the carrier ).
3) damage resulting from failure to operate the product in accordance with the instruction manual;
4) damage resulting from attempted repairs by unauthorized personnel;
5) claims based on misrepresentations made by a sales agent of Renkus-Heinz.
Page 2
1RJXDUDQWHHRIÀWQHVVIRUDSDUWLFXODUSXUSRVH
5HQNXV+HLQ]PDNHVQRFODLPVIRULWVSURGXFWVDVWR¿WQHVVIRUDSDUWLFXODUSXUSRVHDQG
therefore does not guarantee the performance of any Renkus-Heinz equipment in a particular
application ( such a guarantee is the dealer’s responsibility ). Renkus-Heinz guarantees that
SURGXFWVZLOOSHUIRUPWRSXEOLVKHGVSHFL¿FDWLRQVZLWKLQWKHFRPPHUFLDOWROHUDQFHVDFFHSWHG
in the industry ( errors and omissions are excluded from this guarantee ).
/LPLWDWLRQRILPSOLHGZDUUDQWLHV
All implied warranties, including warranties of merchantability, are limited in duration to a
period of six ( 6 ) years from the date of original purchase from Renkus-Heinz, except for the
“WR” ( Weather Resistant ) models. “WR” models because of their exposure to the elements
carry a 3-year Limited Warranty. Refer to rear page for details.
Exclusion of certain damages
Renkus-Heinz’ liability is limited to the repair or replacement, at our option, of any defective
product, and shall in no event include incidentally or consequential commercial damages of
any kind. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the preceding limitation or exclusion may not apply to you.
Enhanced Warranty on Reference Point Arrays and other integrated systems
2QLQWHJUDWHGLQVWDOOHGV\VWHPVLQZKLFKDOOFOXVWHUVRUORXGVSHDNHUV6\VWHP6SHFL¿F$PSOL¿HUV
DQG/RXGVSHDNHU6SHFL¿F&RQWUROOHUVDUHGHVLJQHGDQGPDQXIDFWXUHGE\5HQNXV+HLQ]WKH
six ( 6 ) year limited warranty described above is enhanced to include the replacement or
reconing of diaphragms and woofers damaged by the malfunction of any Renkus-Heinz product
in the system. Failures caused by errors in the initial wiring, or start-up accidents during system
VHWXSLQLWLDOWHVWLQJDUHVSHFL¿FDOO\H[FOXGHG
Page 3
WR ( Weather Resistant ) Models
1) Should be given preventive maintenance on a regular ( at least yearly) schedule;
any exterior damage repaired, woofer cones retreated with moisture retardant, etc.
2) Should be given additional protection (rain hoods, for example) in areas where
extreme weather conditions are common.
3) Self-Powered models should be left on continually in high-humidity applications.
19201 Cook Street, Foothill Ranch, CA 92610-3501 USA
Phone: +1 949 588 9997, Fax: +1 949 588 9514
sales@renkus-heinz.com
www.renkus-heinz.com
Page 4
RH352 July 2011 Rev. E