1. AP-011 1 шт. € Press brake Trumpf TruBend 5085 S Technical Data

Transcription

№ 1.
AP-011
1 шт.
€
Press brake Trumpf TruBend 5085 S
Technical Data:
item number
Year built
operating hours
Manufacturer
Type
CNC Control
Capacity [t]:
Bending length [mm]:
Usable installation height [mm]:
Width between columns [mm]:
Speeds rapid [mm/s]:
Return traverse speed [mm/s]:
Speeds working [mm/s]:
Operating height [mm]:
Stroke [mm]:
AP-011 TruBend5085S
2007
12803/ 1132
Trumpf
TruBend 5085
CNC TASC 6000 5- Axis X1-X2-R-Z1-Z2 + I Axis
85
2720
615
2260
220
220
1-10
1095
445
STANOK AG,
Riedmatt 28 a, CH-6303 Zug, Schweiz,
Tel: +41 41 741 0771, E-Mail: info@stanok.ch, www.stanok.ch
STANOK GmbH, Haselklinge 12, DE-74594 Kressberg, Deutschland, Tel +49 7957 411080, E-Mail: info@stanok.eu, www.stanok.eu
СТАНОК ООО, Ремесленная 17, RU-197110 С.Петербург, Россия, Тел +7 812 313 2428, E-Mail: info@stanok.ru, www.stanok.ru
L/W/H [mm]
Weight [kg]
Bend Guard
Crowning
delivery time:
3620/1740/2835
8600
Bend Guard 220m/s
CNC
Immediately 03.2013
Standard equipment
Standard configuration Machine
- Stable machine frame as welded all-steel construction
- Ram, highly resistant to torsional forces
- Spherical ram suspension, with ram tilt
- Electro-hydraulic downstroking drive with 4-cylinder technology
- Proportional valve technology and activatable double pump
- Modern block hydraulics with control valves mounted on the cylinder
- Electronic pressure balance
- Measuring system with centered glass scales and temperature compensation
- Hydraulic oil filled in the machine (lifetime lubrication)
- Oil cooler
- Switch cabinet cooling (air-air heat exchanger)
- Modern machine design
Backgauge System
- Backgauge system 2-axes with rack-and- pinion drive for X and R axes
- 2 finger stops with safe adjustment from the front
Crowning
- Manual wedge crowning, integrated in the table
Tool Holder
- Upper tool holder "New Standard Clamping", manual, hardened, self-centering; for vertical
tool change
- Lower tool holder with hydraulic clamping, hardened
Lower Tool Adjustement
- Lower tool adjustment, programmable (pneumatic, 2 positions)
Control
- Machine control: TRUMPF TASC 6000 with graphic workshop programming
- Windows Xpe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM memory
- 15 " Touch screen
- Network capability
- Teleservice via analog telefon line
Operation
- Control panel with LCD panel, footswitch für Emergency up, down and E-STOP
- Communication Track, for use of ACB-angle sensor tools (module) and the options "Mobile
Control" and "Mobile Handwheel"
Safety
- Safety equipment: Integrated side doors and automatic roller shutter at the rear
Services
- Installation, start-up and instruction
Extended equipment
Die space/stroke extension +230 mm
Options for Backgauge System
- Backgauge system (6-axes) with switch cabinet cooling
Options for Tool Holder - Upper tool clamping, hydraulic (precondition for BM!)
Options for Crowning - Crowning CNC (precondition for BM!)
Options for Safety Device - BendGuard (for 220 mm/s)
- Foot switch (additional) (not with BM!)
STANOK AG,
Options for Material Handling
- Support bracket (1 pc) (not with BM!)
EN 12622 Conformity As per EN 12622 it is an obligation in the European Community to equip
all hydraulic press
brakes with an opto-electronic safety device in case they will be operated with a ram speed of
>10 mm/s. For this reason BendGuard is required
Delivery time:
Delivery:
03.2013
EXW, Germany
STANOK AG,

1. AP-011 1 шт. € Press brake Trumpf TruBend 5085 S Technical Data

Transcription

Similar documents

1. LA-040 1 St. € Laser cutting machine Trumpf TCL 2530 Technical

1. LA-049 1 шт. € Laser cutting machine Trumpf

№ 1. LA-024 1 шт. € Laser cutting machine Trumpf TCL 3030

Gebrauchtmaschine des Monats TruBend 3120

Gebrauchtmaschine des Monats TruBend 3120 - trumpf