Ermeto Original Valves

Ermeto Original
Valves
Valves
Visual index Non return valves
RHD / p. O11
EO 24° cone end / EO 24° cone end
RHV-R-ED / p. O12
RHZ-R-ED / p. O13
EO 24° cone end /
Male BSPP thread – ED-seal (ISO 1179)
Male BSPP thread – ED-seal (ISO 1179) /
EO 24° cone end
RHV-M-ED / p. O14
RHZ-M-ED / p. O15
EO 24° cone end /
Male metric thread – ED-seal (ISO 9974)
Male metric thread – ED-seal (ISO 9974) /
EO 24° cone end
RHDI / p. O16
Female BSPP thread (ISO 1179-1) /
Female BSPP thread (ISO 1179-1)
RVP / p. O17
Non return valve cartridge
I-TL / p. O18
Internal parts of non return valve
O2
Catalogue 4100-7/UK
Valves
Visual index Non return valves with O-Lok ® connections
RHDMLOS / p. O20
O-Lok® ORFS end / O-Lok® ORFS end
RHV42EDMLOS / p. O21
RHZ42EDMLOS / p. O22
Male BSPP thread – ED-seal (ISO 1179) /
O-Lok® ORFS end
O-Lok® ORFS end /
Male BSPP thread – ED-seal (ISO 1179)
RHV50MLOS / p. O23
RHZ50MLOS / p. O24
Male UN/UNF thread – O-ring (ISO 11926) /
O-Lok® ORFS end
O-Lok® ORFS end /
Male UN/UNF thread – O-ring (ISO 11926)
RHV82EDMLOS / p. O25
RHZ82EDMLOS / p. O26
Male metric thread – ED-seal (ISO 9974) /
O-Lok® ORFS end
O-Lok® ORFS end /
Male metric thread – ED-seal (ISO 9974)
O
O3
Catalogue 4100-7/UK
Valves
Visual index Non return valves with Triple-Lok ® connections
RHDMTXS / p. O27
Triple-Lok® 37° flare end / Triple-Lok® 37° flare end
RHV42EDMXS / p. O28
RHZ42EDMXS / p. O29
Male BSPP thread – ED-seal (ISO 1179) /
Triple-Lok® 37° flare end
Triple-Lok® 37° flare end /
Male BSPP thread – ED-seal (ISO 1179)
RHV50MXS / p. O30
RHZ50MXS / p. O31
Male UN/UNF thread – O-ring (ISO 11926) /
Triple-Lok® 37° flare end
Triple-Lok® 37° flare end /
Male UN/UNF thread – O-ring (ISO 11926)
RHV82EDMXS / p. O32
RHZ82EDMXS / p. O33
Male metric thread – ED-seal (ISO 9974) /
Triple-Lok® 37° flare end
Triple-Lok® 37° flare end /
Male metric thread – ED-seal (ISO 9974)
O4
Catalogue 4100-7/UK
Valves
Visual index shut off valves and ball valves
DV
p. O34
LD
p. O35
EO 24° cone end / EO 24° cone end
EO 24° cone end / EO 24° cone end
WV
p. O36
ELA/ELAE
p. O46
EO 24° cone end / EO 24° cone end / EO 24° cone end
Air-bleed valves
KH (S)
p. O37
KH (71)
p. O38
EO 24° cone end / EO 24° cone end
EO 24° cone end / EO 24° cone end
KH-BSPP (S)
p. O39
Female BSPP thread (ISO 1179-1) /
Female BSPP thread (ISO 1179-1)
KH-BSPP (71)
p. O40
Female BSPP thread (ISO 1179-1) /
Female BSPP thread (ISO 1179-1)
KH-NPT (S)
p. O41
KH-NPT (71)
p. O42
Female NPT thread (SAE 476) /
Female NPT thread (SAE 476)
Female NPT thread (SAE 476) /
Female NPT thread (SAE 476)
KH 3/2 (S)
p. O43
EO 24° cone end / EO 24° cone end / EO 24° cone end
KH 3/2-BSPP(S)
p. O44
Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)
O5
Catalogue 4100-7/UK
O
Valves
Range of non return valves and alternating valves
Range of hand-operated shut off
valves and quarter turn ball valves
Non-return valves with nominal pressure
ratings up to PN 420 bar:
Quarter turn Hand-operated ball valves:
RHD
– for high pressure ratings
up to PN 500 bar
– with tube connection
to male stud:
RHV/RHZ
– leakage rate hydraulic testing under test pressure:
0 drops per minute
– with female thread both ends:
RHDI
– valve cartridges:
RVP
– valve internal parts:
I-TL
– with tube connection both ends:
The pressure specification PN for hand-operated shut-off
valves and quarter turn ball valves applies to the design
factor 1,5 (according DIN 3230 T5 and ISO 5208).
– leakage rate hydraulic testing under test pressure:
1 drop per minute
Steel
Materials:
Body made of steel, coating DIN 50938-FE//A/T4, ball of
hard chrome plated carbon steel, stem of zinc plated steel.
Alternating valves:
– for nominal pressure ratings
up to PN 160
Seals:
Ball seat of POM (e. g. Delrin), stem seal of NBR (e. g. Perbunan).
WV
– leakage rate hydraulic testing under test pressure:
20 drops per minute
Applications:
Suitable for petroleum-based hydraulic fluid, lubricants and
fuel oil.
For applications suitable up to 100 bar.
Hand-operated Shut-off valves:
– for low pressure ratings
up to PN 10 bar
– for medium pressure ratings
up to PN 40 bar
KH
DV
Temperature range:
–10 up to +100 °C.
LD
Design:
Stainless Steel
1. For materials, permissible working pressures, temperatures, flow medium torques for male studs etc. see relevant pages of the catalogue.
2. Tube connection ends must be assembled according to
the Parker EO/EO 2 assembly instructions.
The valve bodies must be held rigidly during assembly
of the tube connection ends.
3. Test pressures for non return valves:
PN in conformance with O.D. information see chapter C.
4. Pressure drop values please see p. C12 and diagrams.
Materials:
Body made of stainless steel, ball of stainless steel, stem
and connectors of stainless steel.
Seals:
Ball seat of POM (e. g. Delrin), stem seal of NBR (e. g. Perbunan), DOZ from function nut FKM (e. g. Viton®).
Applications:
Suitable for petroleum-based hydraulic fluid, lubricants and
fuel oil.
For applications suitable up to 100 bar.
Caution!
Please note the admissible pressure ratings for the EOtube ends.
Temperature range:
–30 up to +100 °C.
Perbunan = registered trademark of Bayer
Viton®
= registered trademark of DuPont
Notes:
To assess the suitability of valves for specific applications, please advise us of the exact specification of the medium to
be used, max. working pressure incl. pressure peaks, temperature and frequency of valve operations. If water is used,
indicate type of water or additives, if any.
O6
Catalogue 4100-7/UK
Valves
DN
RHD/V/Z non return valve
5
4
3
2
1:
2:
3:
4:
5:
6:
1
6
poppet
sealing disc
cover disc
spring
passage disc
Eolastic-sealing
DN = Nominal diameter (mm)
RHD
RHV
RHZ
● Stainless steel valves have FKM (e.g. Viton®) as
standard.
(Up to 3 bar cracking pressure)
● Brass-valves (CuZn35Ni2 2.0540) with internals
(1.4571) available on request.
(Up to 3 bar cracking pressure)
Characteristics:
Poppet check valve with a 90° valve seat with an elastomere sealing disc. Poppet stop for controlled valve opening. Damped opening action to minimize shock and noise.
No reduction of cross section. Maximum flow velocity not
more than 8 m/sec (for higher flow velocities special tests
are required). Sealing of male stud thread by Eolastic soft
seal with types RHV and RHZ.
Assembly:
See assembly instructions for EO/EO 2 connections.
Non-return valves are all packaged against contamination.
Opening pressure:
Standard 1 bar (on request also 0.2, 0.5, 2, 3, 4, 5 and
6 bar are available; please specify on order). For working
pressure see appropriate tables. Cracking pressure tolerance: ± 20 %.
Media:
Hydraulic oil, low flammability hydraulic fluids (excent
for types HFC: for HFD types; FKM seals are necessary).
Please indicate on order if used with compressed air.
Not suitable for steam, combustible/explosive gases, or
oxygen.
For water applications, please consult Parker with details
of water and any additives.
Material:
● Steel zinc-plated (A3C) or (CF chromium6-free), seals
in NBR (e.g. Perbunan), or (e.g. Viton®) on request.
Perbunan = registered trademark of Bayer
Viton®
= registered trademark of DuPont
O7
Catalogue 4100-7/UK
O
Valves
pressure drop in bar
pressure drop tube O.D. 06L/06+08S; size 4;
female BSPP 1/8, 1/4; RVP 13; DN 3.5
In all diagrams is the peak value
of the flow rate in l/min. relating to the
maximum permissible flow velocity of
8 m/sec.
flow rate in l/min
1 bar cracking pressure
pressure drop in bar
pressure drop tube O.D. 8L/10S; size 5;
RVP 16; DN 5.5
flow rate in l/min
1 bar cracking pressure
pressure drop in bar
pressure drop tube O.D. 10L/12S; size 6
female BSPP 3/8; RVP 20; DN 7.5
flow rate in l/min
1 bar cracking pressure
O8
Catalogue 4100-7/UK
Valves
pressure drop in bar
pressure drop tube O.D. 12L/14S; size 8;
RVP 24; DN 9.5
In all diagrams is the peak value
of the flow rate in l/min. relating to the
maximum permissible flow velocity of
8 m/sec.
flow rate in l/min
1 bar cracking pressure
pressure drop in bar
pressure drop tube O.D. 15L/16S; size 10;
female BSPP 1/2; RVP 27; DN 11.5
flow rate in l/min
1 bar cracking pressure
O
pressure drop in bar
pressure drop tube O.D. 18L/20S; size 12;
female BSPP 3/4; RVP 35; DN 15.0
flow rate in l/min
1 bar cracking pressure
O9
Catalogue 4100-7/UK
Valves
pressure drop in bar
pressure drop tube O.D. 22L/25S; size 16;
female BSPP 1; RVP 40; DN 19
In all diagrams is the peak value
of the flow rate in l/min. relating to the
maximum permissible flow velocity of
8 m/sec.
flow rate in l/min
1 bar cracking pressure
pressure drop in bar
pressure drop tube O.D. 28L/30S; size 20;
female BSPP 11/4; RVP 47; DN 24
flow rate in l/min
1 bar cracking pressure
pressure drop in bar
pressure drop tube O.D. 35+42L/38S; size 24;
female BSPP 11/2; RVP 55; DN 29
flow rate in l/min
1 bar cracking pressure
O10
Catalogue 4100-7/UK
Valves
RHD Non return valve
EO 24° cone end / EO 24° cone end
PN (bar)1)
D1
Series
3
L)
S4)
5
DN
L1
L2
L3
S1
S2
S3
Weight
g/1 piece
06
08
10
12
15
18
22
28
35
42
06
08
10
12
14
16
20
25
30
38
3.5
5.5
7.5
9.5
11.5
14.0
18.0
23.0
29.0
29.0
3.5
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
43
44
54.5
57.5
61.5
66.5
76.5
84.5
95.5
96
48.5
48.5
55.5
57.5
63.5
67.5
75.5
82.5
96.5
107.5
29.0
30.0
40.5
43.5
47.5
51.5
61.5
69.5
74.5
74.0
34.5
34.5
40.5
42.5
47.5
50.5
54.5
58.5
69.5
75.5
58.0
59.0
69.5
72.5
77.5
83.5
93.5
102.5
117.5
119.0
63.5
63.5
72.5
74.5
82.5
86.5
97.5
106.5
122.5
136.5
17
19
22
27
27
36
41
50
60
65
19
19
22
24
27
32
41
46
60
65
17
19
24
30
32
36
46
55
60
70
19
19
24
27
32
36
46
50
60
70
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
46
61
104
166
192
292
472
746
1062
1518
70
74
121
148
218
286
506
639
1157
1650
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
Order code*
CF
A3C
71
RHD06LOMD
RHD08LOMD
RHD10LOMD
RHD12LOMD
RHD15LOMD
RHD18LOMD
RHD22LOMD
RHD28LOMD
RHD35LOMD
RHD42LOMD
RHD06SOMD
RHD08SOMD
RHD10SOMD
RHD12SOMD
RHD14SOMD
RHD16SOMD
RHD20SOMD
RHD25SOMD
RHD30SOMD
RHD38SOMD
400
400
400
400
400
400
250
250
250
250
420
420
420
420
420
420
420
420
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
O
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
Stainless steel
O11
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additonal.
suffix needed)
CF
RHD06LOMDCF
NBR
A3C
71
RHD06LOMDA3C
RHD06LOMD71
NBR
VIT
Catalogue 4100-7/UK
Valves
RHV-R-ED Non return valve
EO 24° cone end / Male BSPP thread – ED-seal (ISO 1179)
X1) Eolastic sealing
PN (bar)1)
D1
Series
3
L)
S4)
5
T1
DN
D3
L1
L2
L3
L4
S1
S2
Weight
S3 g/1 piece
06
08
10
12
15
18
22
28
35
42
06
08
10
12
14
16
20
25
30
38
G 1/8 A
G 1/4 A
G 1/4 A
G 3/8 A
G 1/2 A
G 1/2 A
G 3/4 A
G1A
G 1 1/4 A
G 1 1/2 A
G 1/4 A
G 1/4 A
G 3/8 A
G 3/8 A
G 1/2 A
G 1/2 A
G 3/4 A
G1A
G 1 1/4 A
G 1 1/2 A
3.5
5.5
7.5
9.5
11.5
14.0
18.0
23.0
29.0
29.0
3.5
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
14
19
19
22
27
27
32
40
50
55
19
19
22
22
27
27
32
40
50
55
35
37
45.5
49.5
52.5
57.5
62.5
70.5
79.5
79.5
38.5
38.5
45.5
48.5
52.5
56.5
62.5
66.5
77.5
85.5
28.0
30.0
38.5
42.5
45.5
50.0
55.0
63.0
69.0
68.5
31.5
31.5
38.0
41.0
44.5
48.0
52.0
54.5
64.0
69.5
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
42.5
44.5
53.0
57.0
60.5
66.0
71.0
79.5
90.5
91.0
46.0
46.0
54.0
57.0
62.0
66.0
73.5
78.5
90.5
100.0
17
19
22
27
27
36
41
50
60
65
19
19
22
24
27
32
41
46
60
65
17
19
24
30
32
36
46
55
60
70
19
19
24
27
32
36
46
50
60
70
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
47
62
105
175
205
294
450
720
1050
1560
73
79
132
153
230
293
511
648
1176
1624
Order code*
CF
A3C
71
RHV06LREDOMD
RHV08LREDOMD
RHV10LREDOMD
RHV12LREDOMD
RHV15LREDOMD
RHV18LREDOMD
RHV22LREDOMD
RHV28LREDOMD
RHV35LREDOMD
RHV42LREDOMD
RHV06SREDOMD
RHV08SREDOMD
RHV10SREDOMD
RHV12SREDOMD
RHV14SREDOMD
RHV16SREDOMD
RHV20SREDOMD
RHV25SREDOMD
RHV30SREDOMD
RHV38SREDOMD
400
400
400
400
400
400
250
250
250
250
420
420
420
420
420
420
420
420
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
Stainless steel
O12
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additonal.
suffix needed)
CF
RHV06LREDOMDCF
NBR
A3C
71
RHV06LREDOMDA3C
RHV06LREDOMD71
NBR
VIT
Catalogue 4100-7/UK
Valves
RHZ-R-ED Non return valve
Male BSPP thread – ED-seal (ISO 1179) / EO 24° cone end
X1) Eolastic sealing
PN (bar)1)
D1
Series
3
L)
S4 )
5
T1
DN
D3
L1
L2
L3
L4
S1
S2
Weight
S3 g/1 piece
06
08
10
12
15
18
22
28
35
42
06
08
10
12
14
16
20
25
30
38
G 1/8 A
G 1/4 A
G 1/4 A
G 3/8 A
G 1/2 A
G 1/2 A
G 3/4 A
G1A
G 1 1/4 A
G 1 1/2 A
G 1/4 A
G 1/4 A
G 3/8 A
G 3/8 A
G 1/2 A
G 1/2 A
G 3/4 A
G1A
G 1 1/4 A
G 1 1/2 A
3.5
5.5
7.5
9.5
11.5
14.0
18.0
23.0
29.0
29.0
3.5
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
14
19
19
22
27
27
32
40
50
55
19
19
22
22
27
27
32
40
50
55
33.5
35.5
45.5
47.5
49.5
55.5
63.5
71.5
80.5
81.5
38.5
38.5
45.5
48.5
51.5
54.5
60.5
66.5
77.5
87.5
26.5
28.5
38.5
40.5
42.5
48.0
56.0
64.0
70.0
70.5
31.5
31.5
38.0
41.0
43.5
46.0
50.0
54.5
64.0
71.5
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
41.0
43.0
53.0
55.0
57.5
64.0
72.0
80.5
91.5
93.0
46.0
46.0
54.0
57.0
61.0
64.0
71.5
78.5
90.5
102.0
17
19
22
27
27
36
41
50
60
65
19
19
22
24
27
32
41
46
60
65
17
19
24
30
32
36
46
55
60
70
19
19
24
27
32
36
46
50
60
70
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
44
59
125
161
186
275
463
721
1073
1602
71
74
128
152
223
275
490
647
1180
1670
Order code*
CF
A3C
71
RHZ06LREDOMD
RHZ08LREDOMD
RHZ10LREDOMD
RHZ12LREDOMD
RHZ15LREDOMD
RHZ18LREDOMD
RHZ22LREDOMD
RHZ28LREDOMD
RHZ35LREDOMD
RHZ42LREDOMD
RHZ06SREDOMD
RHZ08SREDOMD
RHZ10SREDOMD
RHZ12SREDOMD
RHZ14SREDOMD
RHZ16SREDOMD
RHZ20SREDOMD
RHZ25SREDOMD
RHZ30SREDOMD
RHZ38SREDOMD
400
400
400
400
400
400
250
250
250
250
420
420
420
420
420
420
420
420
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
O
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O13
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additonal.
suffix needed)
CF
RHZ06LREDOMDCF
NBR
A3C
RHZ06LREDOMDA3C
NBR
Catalogue 4100-7/UK
Valves
RHV-M-ED Non return valve
EO 24° cone end / Male metric thread – ED-seal (ISO 9974)
X1) Eolastic sealing
PN (bar)1)
D1
Series
3
L)
S4)
5
T1
DN
D3
L1
L2
L3
L4
S1
S2
Weight
S3 g/1 piece
06
08
10
12
15
18
22
28
35
42
06
08
10
12
14
16
20
25
30
38
M 10×
M 12×1.5
M 14×1.5
M 16×1.5
M 18×1.5
M 22×1.5
M 26×1.5
M 33×2
M 42×2
M 48×2
M 12×1.5
M 14×1.5
M 16×1.5
M 18×1.5
M 20×1.5
M 22×1.5
M 27×2
M 33×2
M 42×2
M 48×2
3.5
5.5
7.5
9.5
11.5
14.0
18.0
23.0
29.0
29.0
3.5
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
14
17
19
22
24
27
32
40
50
55
17
19
22
24
26
27
32
40
50
55
35
36
45.5
49.5
52.5
57.5
62.5
70.5
79.5
79.5
38.5
38.5
45.5
48.5
52.5
56.5
62.5
66.5
77.5
85.5
28.0
29.0
38.5
42.5
45.5
50.0
55.0
63.0
69.0
68.5
31.5
31.5
38.0
41.0
44.5
48.0
52.0
54.5
64.0
69.5
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
42.5
43.5
53.0
57.0
60.5
66.0
71.0
79.5
90.5
91.0
46.0
46.0
54.0
57.0
62.0
66.0
73.5
78.5
90.5
100.0
17
19
22
27
27
36
41
50
60
65
19
19
22
24
27
32
41
46
60
65
17
19
24
30
32
36
46
55
60
70
19
19
24
27
32
36
46
50
60
70
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
46
58
108
173
192
298
446
722
1053
1563
70
76
124
157
215
296
521
648
1178
1627
Order code*
CF
A3C
71
RHV06LMEDOMD
RHV08LMEDOMD
RHV10LMEDOMD
RHV12LMEDOMD
RHV15LMEDOMD
RHV18LMEDOMD
RHV22LMEDOMD
RHV28LMEDOMD
RHV35LMEDOMD
RHV42LMEDOMD
RHV06SMEDOMD
RHV08SMEDOMD
RHV10SMEDOMD
RHV12SMEDOMD
RHV14SMEDOMD
RHV16SMEDOMD
RHV20SMEDOMD
RHV25SMEDOMD
RHV30SMEDOMD
RHV38SMEDOMD
400
400
400
400
400
400
250
250
250
250
420
420
420
420
420
420
420
420
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
Stainless steel
O14
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additonal.
suffix needed)
CF
RHV06LMEDOMDCF
NBR
A3C
71
RHV06LMEDOMDA3C
RHV06LMEDOMD71
NBR
VIT
Catalogue 4100-7/UK
Valves
RHZ-M-ED Non return valve
Male metric thread – ED-seal (ISO 9974) / EO 24° cone end
X1) Eolastic sealing
PN (bar)1)
D1
Series
3
L)
S4 )
5
T1
DN
D3
L1
L2
L3
L4
S1
S2
Weight
S3 g/1 piece
06
08
10
12
15
18
22
28
35
42
06
08
10
12
14
16
20
25
30
38
M 10×1
M 12×1.5
M 14×1.5
M 16×1.5
M 18×1.5
M 22×1.5
M 26×1.5
M 33×2
M 42×2
M 48×2
M 12×1.5
M 14×1.5
M 16×1.5
M 18×1.5
M 20×1.5
M 22×1.5
M 27×2
M 33×2
M 42×2
M 48×2
3.5
5.5
7.5
9.5
11.5
14.0
18.0
23.0
29.0
29.0
3.5
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
14
17
19
22
24
27
32
40
50
55
17
19
22
24
26
27
32
40
50
55
33.5
35.5
45.5
47.5
49.5
55.5
63.5
71.5
80.5
81.5
38.5
38.5
45.5
48.5
51.5
54.5
60.5
66.5
77.5
87.5
26.5
28.5
38.5
40.5
42.5
48.0
56.0
64.0
70.0
70.5
31.5
31.5
38.0
41.0
43.5
46.0
50.0
54.5
64.0
71.5
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
41.0
43.0
53.0
55.0
57.5
64.0
72.0
80.5
91.5
93.0
46.0
46.0
54.0
57.0
61.0
64.0
71.5
78.5
90.5
102.0
17
19
22
27
27
36
41
50
60
65
19
19
22
24
27
32
41
46
60
65
17
19
24
30
32
36
46
55
60
70
19
19
24
27
32
36
46
50
60
70
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
44
58
104
169
174
279
459
721
1078
1601
70
75
123
157
214
279
487
647
1180
1669
Order code*
CF
A3C
71
RHZ06LMEDOMD
RHZ08LMEDOMD
RHZ10LMEDOMD
RHZ12LMEDOMD
RHZ15LMEDOMD
RHZ18LMEDOMD
RHZ22LMEDOMD
RHZ28LMEDOMD
RHZ35LMEDOMD
RHZ42LMEDOMD
RHZ06SMEDOMD
RHZ08SMEDOMD
RHZ10SMEDOMD
RHZ12SMEDOMD
RHZ14SMEDOMD
RHZ16SMEDOMD
RHZ20SMEDOMD
RHZ25SMEDOMD
RHZ30SMEDOMD
RHZ38SMEDOMD
400
400
400
400
400
400
250
250
250
250
420
420
420
420
420
420
420
420
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
250
250
250
250
250
160
160
100
100
100
400
400
400
400
315
315
250
250
250
250
O
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
Stainless steel
O15
Order code suffixes
Suffix
Example
surface
and material
Standard sealing
material
(no additonal.
suffix needed)
CF
RHZ06LMEDOMDCF
NBR
A3C
71
RHZ06LMEDOMDA3C
RHZ06LMEDOMD71
NBR
VIT
Catalogue 4100-7/UK
Valves
RHDI Non return valve
Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)
Series
T1
DN
D1
L1
L2
L3
S1
S2
Weight
g/1 piece
Order code*
CF
A3C1)
71
L3)
G11/18
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 11/4
G 11/2
3.5
3.5
7.5
11.5
15.0
19.0
24.0
29.0
19
19
24
32
41
46
60
65
42.5
51.0
60.0
72.0
84.0
95.0
110.0
114.0
12.0
16.0
17.0
20.0
22.0
25.5
28.0
28.5
8.0
12.0
12.0
15.0
16.5
19.0
21.5
22.0
19
19
24
32
41
46
60
65
19
19
27
36
46
50
60
70
76
82
157
344
664
821
1581
1919
RHDI1/8
RHDI1/4
RHDI3/8
RHDI1/2
RHDI3/4
RHDI1
RHDI11/4
RHDI11/2
400
400
400
315
250
250
250
250
400
400
400
315
250
250
250
250
400
400
400
315
250
250
250
250
1
) Pressure shown = item deliverable
3
) L = light series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
Stainless steel
O16
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
RHDI1/8CF
NBR
A3C
71
RHDI1/8A3C
RHDI1/871
NBR
VIT
Catalogue 4100-7/UK
Valves
RVP Non return valve cartridge
X1) Supporting ring PTFE
X2) O-ring NBR
X3) Sealing disc NBR
PN (bar)1)
Valve
ITL
1
L1
DN
D1
6-L/6u.8-S
3.5
12.945 ± 0.055
13
8-L/10-S
5.5
15.945 ± 0.055
16
10-L/12-S
7.5
19.935 ± 0.065
20
12-L/14-S
9.5
23.935 ± 0.065
24
15-L/16-S
11.5
26.935 ± 0.065
27
18-L/20-S
15.0
34.92 ± 0.08
35
22-L/25-S
19.0
39.92 ± 0.08
40
28-L/30-S
24.0
46.92 ± 0.08
47
35-L/38-S
29.0
54.905 ± 0.095
55
Weight
Supporting ring g/1 piece
D2
± 0,15
L2
L3
+0.12
+0.05
+0.12
+0.05
+0.142
+0.065
+0.149
+0.065
+0.149
+0.065
+0.18
+0.08
+0.18
+0.08
+0.18
+0.08
+0.22
+0.1
23.15
9.5
6.0
8.3×2.4
SRA 13-2.05-1.0
26.65
9.5
6.5
11.3×2.4
SRA 16-2.05-1.0
30.15
9.5
6.5
15.3×2.4
SRA 20-2.05-1.0
54
RVP20
420
400
400
35.15
12.0
7.5
18.2×3
SRA 24-2.6-1.0
80
RVP24
420
315
315
38.15
12.0
7.5
21.2×3
SRA 27-2.6-1.0
105
RVP27
420
315
315
O-ring
Order code*
CF
A3C
71
21
RVP13
420
400
400
32
RVP16
420
400
400
44.65
12.0
9.5
29.2×3
SRA 35-2.5-1.0
204
RVP35
420
250
250
50.65
12.0
11.0
34.2×3
SRA 40-2.5-1.0
275
RVP40
420
250
250
60.15
13.0
13.0
41.2×3
SRA 47-2.6-1.5
412
RVP47
250
250
250
70.15
16.0
13.0
44.2×5.7
SRA 55-5.1-1.5
607
RVP55
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
Stainless steel
O17
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
RHP13CF
NBR
A3C
71
RHP13A3C
RHP1371
NBR
VIT
Catalogue 4100-7/UK
Valves
I-TL Internal parts of non return valve
X1) poppet
X2) sealing disc (smooth side to the poppet)
X3) cover disc
X4) spring
X5) passage disc
PN (bar)1)
Series
Tube
O.D.
Hub
Weight
g/1 piece
D1+0.1
D2+0.1
D3+0.1
L1±0.1
L2
Order code*
A3C
71
L/S/S
L/S
L/S
L/S
L/S
06/06/08
08/10
10/12
12/14
15/16
3.5
5.5
7.5
9.5
11.5
7.5
10.2
13.0
16.7
19.5
8.6
11.6
14.1
18.1
20.6
8.2
11.0
14.0
16.5
19.0
2.0
2.0
2.0
2.5
2.5
1.0
1.7
2.3
2.9
3.5
2
4
7
13
18
ITL06L/06+08S
ITL08L/10S
ITL10L/12S
ITL12L/14S
ITL15L/16S
*
*
*
*
*
*
*
*
*
*
L/S
L/S
L/S
L/L/S
18/20
22/25
28/30
35/38/42
15.0
19.0
24.0
29.0
25.2
30.8
38.6
45.7
27.1
32.6
40.6
48.1
22.5
27.0
32.5
37.5
3.0
3.0
3.5
3.5
4.4
5.5
7.3
8.9
37
54
107
144
ITL18L/20S
ITL22L/25S
ITL28L/30S
ITL35L+42l/38S
*
*
*
*
*
*
*
*
* = item deliverable
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc
yellow plated
Stainless steel
O18
Order code suffixes
Suffix
Example
surface
and material
A3C
71
Standard
sealing material
(no additional.
suffix needed)
ITL06L/06+008S
ITL06L71/06+008S
NBR
VIT
Catalogue 4100-7/UK
Valves
RHD/V/Z Non return valves with O-Lok® or Triple-Lok® connections
Material:
● Steel zinc-plated (A3C) or (CF chromium6-free), seals
in NBR (e.g. Perbunan)
O
● Internal parts in stainless steel with FKM (Viton®) also
available on request.
Perbunan = registered trademark of Bayer
Viton®
= registered trademark of DuPont
O19
Catalogue 4100-7/UK
Valves
RHDMLOS Non return valve
O-Lok® ORFS end / O-Lok® ORFS end
Tube 1
O.D.
1
Tube 2
O.D.
mm
Inch
mm
Inch
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
ORFS
(UN/UNF
thread
T
ORFS
(UN/UNF)
thread
T1
9/16-18UNF
9/16-18UNF
11/16-16UNF 11/16-16UNF
13/16-16UNF 13/16-16UNF
1-14UNF
1-14UNF
1 3/16-12UNF 1 3/16-12UNF
1 7/16-12UNF 1 7/16-12UNF
1 11/16-12UNF 1 11/16-12UNF
2-12UNF
2-12UNF
PN (bar)1)
H1
H2
FF
19
22
24
32
41
46
60
65
19
24
27
36
46
50
60
70
44.5
53.5
59.5
70.5
77.5
81.5
91.5
98.5
DN
(Nom. Weight
diam.) g/1 piece
3.5
5.5
7.5
11.5
15.0
19.0
24.0
29.0
108
188
223
428
731
1076
1630
2362
Order code*
CF
A3C
4RHDMLOS
6RHDMLOS
8RHDMLOS
10RHDMLOS
12RHDMLOS
16RHDMLOS
20RHDMLOS
24RHDMLOS
420
420
420
420
420
420
250
250
400
400
400
315
250
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O20
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
4RHDMLOSCF
A3C (no
suffix needed) 4RHDMLOS
NBR
NBR
Catalogue 4100-7/UK
Valves
RHV42EDMLOS Non return valve
Male BSPP thread – ED-seal (ISO 1179) / O-Lok® ORFS end
Tube
O.D.
1
BSPP
thread
mm
Inch
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
T42
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1 1/4
G 1 1/2
PN (bar)1)
ORFS
(UN/UNF)
thread
T
H1
H2
L5
9/16-18UNF
11/16-16UNF
13/16-16UNF
1-14UNF
1 3/16-12UNF
1 7/16-12UNF
1 11/16-12UNF
2-12UNF
19
22
24
32
41
46
60
65
19
24
27
36
46
50
60
70
44.5
56.5
61.5
70.0
77.5
84.0
95.0
105.0
HH
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
36.5
44.5
49.5
56.0
63.5
66.0
75.0
83.0
3.5
6.5
7.5
11.5
15.0
19.0
24.0
29.0
92
165
191
366
631
863
1403
1969
4RHV42EDMLOS
6RHV42EDMLOS
8RHV42EDMLOS
10RHV42EDMLOS
12RHV42EDMLOS
16RHV42EDMLOS
20RHV42EDMLOS
24RHV42EDMLOS
420
420
420
420
420
420
250
250
400
400
400
315
250
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O21
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
4RHV42EDMLOSCF
NBR
4RHV42EDMLOS
NBR
Catalogue 4100-7/UK
Valves
RHZ42EDMLOS Non return valve
O-Lok® ORFS end / Male BSPP thread – ED-seal (ISO 1179)
Tube
O.D.
1
BSPP
thread
mm
Inch
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
T42
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1 1/4
G 1 1/2
PN (bar)1)
ORFS
(UN/UNF)
thread
T
H1
H2
L5
9/16-18UNF
11/16-16UNF
13/16-16UNF
1-14UNF
1 3/16-12UNF
1 7/16-12UNF
1 11/16-12UNF
2-12UNF
19
22
24
32
41
46
60
65
19
24
27
36
46
50
60
70
44.5
56.5
61.5
70.0
77.5
84.0
95.0
105.0
HH
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
36.5
44.5
49.5
56.0
53.5
66.0
75.0
83.0
3.5
6.5
7.5
11.5
15.0
19.0
24.0
29.0
91
161
190
348
634
863
1397
2001
4RHZ42EDMLOS
6RHZ42EDMLOS
8RHZ42EDMLOS
10RHZ42EDMLOS
12RHZ42EDMLOS
16RHZ42EDMLOS
20RHZ42EDMLOS
24RHZ42EDMLOS
420
420
420
420
420
420
250
250
400
400
400
315
250
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O22
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
4RHZ42EDMLOSCF
NBR
4RHZ42EDMLOS
NBR
Catalogue 4100-7/UK
Valves
RHV5OMLOS Non return valve
Male UN/UNF thread – O-ring (ISO 11926) / O-Lok® ORFS end
Tube
O.D.
1
mm
Inch
UNF
male
thread
T5
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
7/16-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
PN (bar)1)
ORFS
(UN/UNF)
thread
T
H1
H2
L5
9/16-18UNF
11/16-16UNF
13/16-16UNF
1-14UNF
1 3/16-12UNF
1 7/16-12UNF
1 11/16-12UNF
2-12UNF
19
22
24
32
41
46
60
65
19
24
27
36
46
50
60
70
45.5
54.5
60.5
71.0
79.0
82.5
92.5
99.5
HH
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
34.5
42.5
46.5
55.0
60.5
64.0
74.0
81.0
3.5
5.5
5.5
11.5
15.0
19.0
24.0
29.0
92
165
165
366
631
863
1403
1969
4RHV5OMLOS
6RHV5OMLOS
8RHV5OMLOS
10RHV5OMLOS
12RHV5OMLOS
16RHV5OMLOS
20RHV5OMLOS
24RHV5OMLOS
420
420
420
420
420
420
250
250
400
400
400
315
250
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O23
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
RHV5OMLOSCF
NBR
4RHV5OMLOS
NBR
Catalogue 4100-7/UK
Valves
RHZ5OMLOS Non return valve
O-Lok® ORFS end / Male UN/UNF thread – O-ring (ISO 11926)
Tube
O.D.
1
mm
Inch
UNF
male
thread
T5
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
7/16-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
PN (bar)1)
ORFS
(UN/UNF)
thread
T
H1
H2
L5
9/16-18UNF
11/16-16UNF
13/16-16UNF
1-14UNF
1 3/16-12UNF
1 7/16-12UNF
1 11/16-12UNF
2-12UNF
19
22
24
32
41
46
60
65
19
24
27
36
46
50
60
70
45.5
54.5
60.5
71.0
79.0
82.5
92.5
99.5
HH
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
34.5
42.5
46.5
55.0
60.5
64.0
74.0
81.0
3.5
5.5
5.5
11.5
15.0
19.0
24.0
29.0
91
161
161
348
634
863
1397
2001
4RHZ5OMLOS
6RHZ5OMLOS
8RHZ5OMLOS
10RHZ5OMLOS
12RHZ5OMLOS
16RHZ5OMLOS
20RHZ5OMLOS
24RHZ5OMLOS
420
420
420
420
420
420
250
250
400
400
400
315
250
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O24
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
4RHZ5OMLOSCF
A3C (no
suffix needed) 4RHZ5OMLOS
NBR
NBR
Catalogue 4100-7/UK
Valves
RHV82EDMLOS Non return valve
Male metric thread – ED-seal (ISO 9974) / O-Lok® ORFS end
Tube
O.D.
1
mm
Inch
metric
thread
T82
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
M12×1.5
M16×1.5
M18×1.5
M22×1.5
M27×2.0
M33×2.0
M42×2.0
M48×2.0
PN (bar)1)
ORFS
(UN/UNF)
thread
T
H1
H2
L5
9/16-18UNF
11/16-16UNF
13/16-16UNF
1-14UNF
1 3/16-12UNF
1 7/16-12UNF
1 11/16-12UNF
2-12UNF
19
22
24
32
41
46
60
65
19
24
27
36
46
50
60
70
48.5
56.5
61.5
72.0
79.5
84.0
95.0
103.0
HH
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
36.5
44.5
49.5
58.0
63.5
66.0
75.0
81.0
3.5
5.5
7.5
11.5
15.0
19.0
24.0
29.0
89
157
195
369
628
867
1409
1970
4M12RHV82EDMLOS
6M16RHV82EDMLOS
8M18RHV82EDMLOS
10M22RHV82EDMLOS
12M27RHV82EDMLOS
16M33RHV82EDMLOS
20M42RHV82EDMLOS
24M48RHV82EDMLOS
420
420
420
420
420
420
250
250
400
400
400
315
250
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O25
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
4M12RHV82EDMLOSCF
NBR
4M12RHV82EDMLOS
NBR
Catalogue 4100-7/UK
Valves
RHZ82EDMLOS Non return valve
O-Lok® ORFS end / Male metric thread – ED-seal (ISO 9974)
Tube
O.D.
1
mm
Inch
metric
thread
T82
6
8, 10
12
14, 15, 16
18, 20
22, 25
28, 30, 32
35, 38
1/4
5/16, 3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
M12×1.5
M16×1.5
M18×1.5
M22×1.5
M27×2.0
M33×2.0
M42×2.0
M48×2.0
PN (bar)1)
ORFS
(UN/UNF)
thread
T
H1
H2
L5
9/16-18UNF
11/16-16UNF
13/16-16UNF
1-14UNF
1 3/16-12UNF
1 7/16-12UNF
1 11/16-12UNF
2-12UNF
19
22
24
32
41
46
60
65
19
24
27
36
46
50
60
70
48.5
56.5
61.5
70.0
77.5
84.0
95.0
115.0
HH
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
36.5
44.5
49.5
56.0
61.5
66.0
75.0
93.0
3.5
5.5
7.5
11.5
15.0
19.0
24.0
29.0
89
156
195
352
608
965
1396
1978
4M12RHZ82EDMLOS
6M16RHZ82EDMLOS
8M18RHZ82EDMLOS
10M22RHZ82EDMLOS
12M27RHZ82EDMLOS
16M33RHZ82EDMLOS
20M42RHZ82EDMLOS
24M48RHZ82EDMLOS
420
420
420
420
420
420
250
250
400
400
400
315
250
250
250
250
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O26
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
4M12RHZ82EDMLOSCF
A3C (no
suffix needed) 4M12RHZ82EDMLOS
NBR
NBR
Catalogue 4100-7/UK
Valves
RHDMTXS Non return valve
Triple-Lok® 37° flare end / Triple-Lok® 37° flare end
Tube 1
O.D.
1
Tube 2
O.D.
mm
Inch
mm
Inch
Thread
JIC
SAE
T1
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNF
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
PN (bar)1)
Thread
JIC
SAE
T2
C1
C2
L1
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNF
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
19
22
24
27
32
41
46
60
65
19
24
27
32
36
46
50
60
70
52.5
59.5
61.5
69.5
78.5
87.5
92.5
105.5
118.5
DN
(Nom. Weight
diam.) g/1 piece
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
108
188
223
324
428
731
1076
1630
2362
Order code*
CF
A3C
4RHDMTXS
5RHDMTXS
6RHDMTXS
8RHDMTXS
10RHDMTXS
12RHDMTXS
16RHDMTXS
20RHDMTXS
24RHDMTXS
420
420
420
420
350
350
280
250
210
350
350
350
315
315
250
250
210
140
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O27
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
4RHDMTXSCF
A3C (no
suffix needed) 4RHDMTXS
NBR
NBR
Catalogue 4100-7/UK
Valves
RHV42EDMXS Non return valve
Male BSPP thread – ED-seal (ISO 1179) / Triple-Lok® 37° flare end
Tube
O.D.
1
BSPP
thread
mm
Inch
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
T4
G 1/8
G 1/4
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1 1/4
G 1 1/2
PN (bar)1)
Thread
JIC
SAE
T
C1
C2
L5
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
19
22
24
27
32
41
46
60
65
19
24
27
32
36
46
50
60
70
48.0
59.5
62.0
67.0
76.0
84.5
89.5
102.0
113.0
LL
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
40.0
47.5
50.0
55.0
62.0
68.5
71.5
82.0
91.0
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
92
165
191
277
366
631
863
1403
1969
4RHV42EDMXS
5-4RHV42EDMXS
6RHV42EDMXS
8RHV42EDMXS
10RHV42EDMXS
12RHV42EDMXS
16RHV42EDMXS
20RHV42EDMXS
24RHV42EDMXS
420
420
420
420
350
350
280
250
210
350
350
350
315
315
250
250
210
140
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O28
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
4RHV42EDMXSCF
A3C (no
suffix needed) 4RHV42EDMXS
NBR
NBR
Catalogue 4100-7/UK
Valves
RHZ42EDMXS Non return valve
Triple-Lok® 37° flare end / Male BSPP thread – ED-seal (ISO 1179)
Tube
O.D.
1
BSPP
thread
mm
Inch
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
T4
G 1/8
G 1/4
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1 1/4
G 1 1/2
PN (bar)1)
Thread
JIC
SAE
T
C1
C2
L5
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
19
22
24
27
32
41
46
60
65
19
24
27
32
36
46
50
60
70
48.0
59.0
62.0
66.0
74.0
82.5
89.5
102.0
115.0
LL
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
40.0
47.0
50.0
54.0
60.0
66.5
71.5
82.0
93.0
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
89
156
190
278
348
634
863
1397
2001
4RHZ42EDMXS
5-4RHZ42EDMXS
6RHZ42EDMXS
8RHZ42EDMXS
10RHZ42EDMXS
12RHZ42EDMXS
16RHZ42EDMXS
20RHZ42EDMXS
24RHZ42EDMXS
420
420
420
420
350
350
280
250
210
350
350
350
315
315
250
250
210
140
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O29
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
4RHZ42EDMXSCF
NBR
4RHZ42EDMXS
NBR
Catalogue 4100-7/UK
Valves
RHV5OMXS Non return valve
Male UN/UNF thread – O-ring (ISO 11926) / Triple-Lok® 37° flare end
Tube
O.D.
1
mm
Inch
Thread
UNF
T5
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
PN (bar)1)
Thread
JIC
SAE
T
C1
C2
L5
7/16-18UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
19
22
24
27
32
41
46
60
65
19
24
27
32
36
46
50
60
70
49.5
56.5
59.5
66.5
75.0
84.0
88.0
99.5
109.5
LL
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
38.5
45.5
47.5
52.5
59.0
65.5
69.5
81.0
91.0
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
92
165
191
277
366
631
863
1403
1969
4RHV5OMXS
5RHV5OMXS
6RHV5OMXS
8RHV5OMXS
10RHV5OMXS
12RHV5OMXS
16RHV5OMXS
20RHV5OMXS
24RHV5OMXS
420
420
420
420
350
350
280
250
210
350
350
350
315
315
250
250
210
140
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O30
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
RHV5OMXSCF
NBR
4RHV5OMXS
NBR
Catalogue 4100-7/UK
Valves
RHZ5OMXS Non return valve
Triple-Lok® 37° flare end / Male UN/UNF thread – O-ring (ISO 11926)
Tube
O.D.
1
mm
Inch
Thread
UNF
T5
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
PN (bar)1)
Thread
JIC
SAE
T
C1
C2
L5
7/16-18UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
19
22
24
27
32
41
46
60
65
19
24
27
32
36
46
50
60
70
49.5
56.5
59.5
66.5
75.0
84.0
88.0
99.5
109.5
LL
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
38.5
45.5
47.5
52.5
59.0
65.5
69.5
81.0
91.0
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
91
161
190
278
348
634
863
1397
2001
4RHZ5OMXS
5RHZ5OMXS
6RHZ5OMXS
8RHZ5OMXS
10RHZ5OMXS
12RHZ5OMXS
16RHZ5OMXS
20RHZ5OMXS
24RHZ5OMXS
420
420
420
420
350
350
280
250
210
350
350
350
315
315
250
250
210
240
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O31
Order code suffixes
Suffix
Example
surface
and material
Standard
sealing material
(no additional.
suffix needed)
CF
4RHZ5OMXSCF
A3C (no
suffix needed) 4RHZ5OMXS
NBR
NBR
Catalogue 4100-7/UK
Valves
RHV82EDMXS Non return valve
Male metric thread – ED-seal (ISO 9974) / Triple-Lok® 37° flare end
Tube
O.D.
1
mm
Inch
Metric
thread
T82
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
M10×1.0
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M27×2.0
M33×2.0
M42×2.0
M48×2.0
PN (bar)1)
Thread
JIC
SAE
T
C1
C2
L5
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
19
22
24
27
32
41
46
60
65
19
24
27
32
36
46
50
60
70
48.0
59.5
62.0
67.0
73.5
84.5
89.5
102.0
113.0
LL
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
40.0
47.5
50.0
55.0
61.5
68.5
71.5
82.0
91.0
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
89
157
195
274
369
628
867
1409
1970
4M10RHV82EDMXS
5M12RHV82EDMXS
6M14RHV82EDMXS
8M16RHV82EDMXS
10M18RHV82EDMXS
12M27RHV82EDMXS
16M33RHV82EDMXS
20M42RHV82EDMXS
24M48RHV82EDMXS
420
420
420
420
350
350
280
250
210
350
350
350
315
315
160
250
210
140
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O32
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
4M10RHV82EDMXSCF
NBR
4M10RHV82EDMXS
NBR
Catalogue 4100-7/UK
Valves
RHZ82EDMXS Non return valve
Triple-Lok® 37° flare end / Male metric thread – ED-seal (ISO 9974)
Tube
O.D.
1
mm
Inch
Metric
thread
T82
6
8
10
12
14, 15, 16
18, 20
25
28, 30, 32
35, 38
1/4
5/16
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
M10×1.0
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M27×2.0
M33×2.0
M42×2.0
M48×2.0
PN (bar)1)
Thread
JIC
SAE
T
C1
C2
L5
7/16-20UNF
1/2-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNS
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
1 7/8-12UN
19
22
24
27
32
41
46
60
65
19
24
27
32
36
46
50
60
70
48.0
59.5
62.0
66.0
71.5
82.5
89.5
102.0
115.0
LL
DN
(Nom.
diam.)
Weight
g/1 piece
Order code*
CF
A3C
40.0
47.5
50.0
54.0
59.5
66.5
71.5
82.0
93.0
3.5
5.5
7.5
9.5
11.5
15.0
19.0
24.0
29.0
89
156
195
272
352
608
965
1396
1807
4M10RHZ82EDMXS
5M12RHZ82EDMXS
6M14RHZ82EDMXS
8M16RHZ82EDMXS
10M18RHZ82EDMXS
12M27RHZ82EDMXS
16M33RHZ82EDMXS
20M42RHZ82EDMXS
24M48RHZ82EDMXS
420
420
420
420
350
350
280
250
210
350
350
350
315
315
250
250
210
140
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
Material
*Please add the suffixes
below according to the material/
surface required.
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
O33
Order code suffixes
Suffix
Example
surface
and material
CF
A3C (no
suffix needed)
Standard
sealing material
(no additional.
suffix needed)
4M10RHZ82EDMXSCF
NBR
4M10RHZ82EDMXS
NBR
Catalogue 4100-7/UK
Valves
DV Shut-off valve PN 10 – Casing DIN 3512
EO 24° cone end / EO 24° cone end
(with internal threaded spindle)
For cold and warm water* up to 80°C, compressed air, mineral oils and fuel oils types EL and L, 6 bar and up to 80°C.
The pressure specification PN for hand-operated
shut-off valves applies to the design
factor 1,5 (according DIN 3230 T5
and ISO 5208).
Caution!
Please note the admissible
pressure ratings for the
EO-tube ends.
DVAE
EO tube end ⇐ male BSPP
DVAA
male BSPP ⇐ EO tube end
DV-valves with male
BSPP thread on request.
*Indicate type of water
or additive if any
X1)
X2)
X3)
X4)
X5)
X6)
X7)
X8)
X9)
X10)
Hand wheel:
Spindle:
Stuffing boxpacking:
Haed piece:
Sealing:
Casing:
Valve cone:
Shut-off sealing:
Male stud fitting:
Sealing:
material: Polyamid
material: Brass 2.0401
PTFE Compound
material: Brass 2.0401
O-ring NBR (e. g. Perbunan)
material: Brass 2.0340.02
material: Brass 2.0401
NBR (e. g. Perbunan)
material: Brass 2.0540
Eolastic-sealing NBR (e. g. Perbunan)
D1
Series
L3)
5
T1
DN
D3
L1
L2
L3
L4
L5
S1
S2
S3
Weight
g/1 piece
06
08
10
12
15
18
22
28
35
M 12×1.5
M 14×1.5
M 16×1.5
M 18×1.5
M 22×1.5
M 26×1.5
M 30×2
M 36×2
M 45×2
5
6
8
10
12
16
20
25
32
50
50
50
50
50
50
60
60
70
102
102
104
104
107
109
123
140
166
88
88
90
90
93
94
108
125
145
63
63
63
63
65
67
67
95
102
7
7
7
7
8
8
8
10
10
117
117
119
119
123
126
140
158
188
22
22
22
22
27
27
32
41
50
21
21
21
21
25
25
32
38
47
14
17
19
22
27
32
36
41
50
313
305
308
304
426
434
670
1030
1640
1
) Pressure shown = item deliverable
3
) L = light series
Order code*
DV06LX
DV08LX
DV10LX
DV12LX
DV15LX
DV18LX
DV22LX
DV28LX
DV35LX
PN (bar)1)
without
surface
10
10
10
10
10
10
10
10
10
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Brass 2.0340.02
without
O34
DV06LX
Standard
sealing material
(no additional.
suffix needed)
PTFE / NBR
Catalogue 4100-7/UK
Valves
LD Shut-off valve PN 40
EO 24° cone end / EO 24° cone end
(with internal threaded spindle)
For hydraulic oil, mineral, oil, fuel oil, Diesel, water* etc. Temperature up to 150°C. For steam up to 10 bar.
For compressed air up to 35 bar on request. CS DIN 86501 Rg.-N.
The pressure specification PN for hand-operated
shut-off valves applies to the design
factor 1,5 (according DIN 3230 T5
and ISO 5208).
Caution!
Please note the admissible
pressure ratings for the
EO-tube ends.
X1)
X2)
X3)
X4)
X5)
X6)
X7)
X8)
Hand wheel:
Spindle:
Stuffing box packing:
Head piece:
Sealing:
Locking plates:
Valve cone:
Casing:
EO-tube connection:
for copper tubes nuts, cutting and locking rings of
brass
Plastic material typ 74 according to DIN 388 Form C
with internal thread. Material: Cu Zn 35 Ni 2
Graphite
material: Cu Zn 39 Pb 3
Copper ring
material: St. 37/zinc plated
loose tip material: Cu Zn 35 Ni 2
material: G-Cu Sn 5Zn Pb (Rg 5 according to DIN 1705)
Attention:
for steel tubes: nuts, progressive rings of steel
specify when ordering
We recommend pre-installation in hardened preinstallation body (see assembly instructions)
Order code*
PN (bar)1)
without
surface
LD10SX
LD12SX
LD14SX
LD16SX
LD20SX
LD25SX
LD30SX
LD38SX
40
40
40
40
40
40
40
40
D1
Series
S4 )
5
T1
DN
D3
L1
L2
L3
L4
L5
S1
Weight
g/1 piece
10
12
14
16
20
25
30
38
M18×1.5
M20×1.5
M22×1,5
M24×1.5
M30×2
M36×2
M42×2
M52×2
6
8
10
12
16
20
25
32
63
63
63
80
80
100
100
100
60
64
70
84
90
110
120
140
45
49
54
67
69
86
93
108
98
98
98
110
110
129
129
158
7
7
7
9
9
12
12
12
77
81
89
103
112
134
146
169
22
24
27
30
36
46
50
60
383
401
417
631
688
1191
1322
2268
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Gunmetal (Rg 5) 2.1096
without
O35
LD10SX
Standard
sealing material
(no additional.
suffix needed)
Graphit / Metal
Catalogue 4100-7/UK
O
Valves
WV Alternating valve
EO 24° cone end / EO 24° cone end / EQ 24° cone end
These valves permit the passage of flow from either inlet 1 or 2 to the outlet port whilst shutting of the inlet port not in use.
The shutting off, of an inlet is achieved by a floating ball bearing which moves by the pressure of the flow.
Material: steel
Surface finish: Zinc plated and yellow chromated (A3C).
Directions of flow:
D1 → D3 = D2 closed
D2 → D3 = D1 closed
Valves are not recommended for cmpressed air and gases.
WV-valves are not to be used in connection with weld nipples, swivel nuts
etc. where there is no contact with a shoulder stop in the inner cone.
Temperature range without pressure reductions: –40°C up to +120°C.
Recommended fitting position as shown in the picture.
Leakage rate for alternating valves (hydraulic test with test pressure = Pmax:
approx. 20 drops (test period of 1 minute).
PN (bar)1)
D1
Series
L3)
5
T1
DN
L1
L2
L3
S1
S2
Weight
g/1 piece
8
10
12
15
M 14×1.5
M 16×1.5
M 18×1.5
M 22×1.5
4,5
6,0
7,5
10,0
21
22
24
28
14
15
17
21
29
30
32
36
14
17
19
19
17
19
22
27
53
73
96
134
1
) Pressure shown = item deliverable
3
) L = light series
Order code*
CF
A3C
WV08LOMD
WV10LOMD
WV12LOMD
WV15LOMD
160
160
160
160
160
160
160
160
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Steel, zinc plated.,
chrome6-free
Steel, zinc
yellow plated
CF
A3C
O36
Standard
sealing material
(no additional.
suffix needed)
WV08LOMDCF
Steel ball
WV08LOMDA3C
Steel ball
Catalogue 4100-7/UK
Valves
KH 2-way ball valve steel
EO 24° cone end / EO 24° cone end
DN 4-25
DN 32-40
PN (bar)1)
D1
Series
L3)
S4 )
5
DN
L1
L2
L3
L4
L5
L6
L7
S1
S2
S3
S4
Weight
g/1 piece
06
08
10
12
15
18
22
28
35
35
42
42
08
10
12
14
16
20
25
30
38
38
4
6
8
10
12
16
20
25
25
32
25
40
4
6
8
10
12
16
20
25
25
32
67
67
75
75
83
82
99
108
116
121
121
118
73
73
77
81
87
90
107
120
134
127
53
53
61
61
69
67
84
93
95
100
99
96
59
58
62
65
70
69
83
93
102
95
10.0
10.0
14.5
14.5
17.0
20.0
24.0
26.0
26.0
36.5
26.0
42.5
10.0
10.0
14.5
14.5
17.0
20.0
24.0
26.0
26.0
36.5
25
25
35
35
40
45
55
60
60
80
60
90
25
25
35
35
40
45
55
60
60
80
55.0
55.0
68.0
68.0
92.0
105.0
113.0
118.0
118.0
180.5
118.0
190.5
55.0
55.0
68.0
68.0
92.0
105.0
113.0
118.0
118.0
180.5
76
76
100
100
112
166
187
187
187
320
187
320
76
76
100
100
112
166
187
187
187
320
82
82
90
90
99
99
116
126
138
143
144
141
88
90
94
100
106
112
131
146
163
156
19
19
24
24
30
36
41
50
50
60
55
70
19
19
24
24
30
36
41
50
55
60
7
7
8
8
10
11
14
14
14
17
14
17
7
7
8
8
10
11
14
14
14
17
20
20
30
30
35
45
45
55
55
73
55
85
20
20
30
30
35
45
45
55
55
73
14
17
19
22
27
32
36
41
50
50
60
60
19
22
24
27
30
36
46
50
60
60
195
190
420
410
631
850
1210
1750
1820
3158
1940
3788
214
220
430
440
649
900
1290
1880
1950
3266
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
Order code*
bronzed
KH06LX
KH08LX
KH10LX
KH12LX
KH15LX
KH18LX
KH22LX
KH28LX
KH35LXDN25
KH35LX
KH42LXDN25
KH42LX
KH08SX
KH10SX
KH12SX
KH14SX
KH16SX
KH20SX
KH25SX
KH30SX
KH38SXDN25
KH38SX
500
500
500
500
500
400
400
400
400
315
400
315
500
500
500
500
500
400
400
400
400
315
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Steel, bronzed
DIN 50938-FE//A/T4
O37
KH06LX
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
O
Valves
KH 2-way ball valve stainless steel
EO 24° cone end / EO 24° cone end
DN 4-25
DN 32-40
PN (bar)1)
D1
Series
3
L)
S4)
5
DN
L1
L2
L3
L4
L5
L6
L7
S1
S2
S3
S4
Weight
g/1 piece
06
08
10
12
15
18
22
28
35
42
08
10
12
14
16
20
25
30
38
4
6
8
10
12
16/12
20
25
32
40
4
6
8
10
12
16/12
20
25
32
73
73
87
87
91
91
105
112
145
150
76
76
89
93
96
99
113
124
145
59
59
73
73
77
76
87
92
105
114
62
61
74
77
79
78
86
93
100
13.7
13.7
18.0
18.0
21.0
21.0
31.0
38.0
45.0
52.2
13.7
13.7
18.0
18.0
21.0
21.0
31.0
38.0
45.0
30.0
30.0
40.0
40.0
45.0
45.0
65.0
75.0
93.2
104.4
30.0
30.0
40.0
40.0
45.0
45.0
65.0
75.0
93.2
56.5
56.5
84.5
84.5
90.0
90.0
115.0
125.0
175.0
186.0
56.5
56.5
84.5
84.5
90.0
90.0
115.0
125.0
175.0
76
76
130
130
130
130
185
185
320
320
76
76
130
130
130
130
185
185
320
88
88
102
102
107
108
119
125
148
159
91
93
106
112
115
121
134
146
161
22
22
30
30
32
32
46
50
70
80
22
22
30
30
32
32
46
50
70
7
7
8
8
10
10
14
14
19
19
7
7
8
8
10
10
14
14
19
30
30
40
40
45
45
65
75
100
110
30
30
40
40
45
45
65
75
100
14
17
19
22
27
32
36
41
50
60
19
22
24
27
30
36
46
50
60
383
381
809
821
1020
1037
1610
2032
4780
7754
392
460
840
847
1055
1079
1720
2150
6066
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Stainless Steel
without
O38
KH06L71X
Order code*
71
KH06L71X
KH08L71X
KH10L71X
KH12L71X
KH15L71X
KH18L71X
KH22L71X
KH28L71X
KH35L71X
KH42L71X
KH08S71X
KH10S71X
KH12S71X
KH14S71X
KH16S71X
KH20S71X
KH25S71X
KH30S71X
KH38S71X
500
500
500
500
500
500
420
420
420
420
500
500
500
500
500
500
420
420
420
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
Valves
KH 2-way BSPP ball valve steel
Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)
DN 4-25
1
DN 32-40
PN (bar)1)
T1
DN
L1
L2
L3
L4
L5
L6
L7
L8
S1
S2
S3
Weight
g/1 piece
Order code*
G 1/8
G 1/4
G 3/8
G 1/2
G 5/8
G 3/4
G1
G 1 1/4
G 1 1/4
G 1 1/2
G 1 1/2
4
6
10
12
16
20
25
32
25
40
25
69
69
73
82
88
93
113
110
134
114
139
36
36
45
51
50
60
70
70
70
75
70
12
12
14
15
18
18
20
20
20
22
22
10.0
10.0
14.5
17.0
20.0
24.0
26.0
36.5
26.0
42.5
26.0
25
25
35
40
45
55
60
80
60
90
60
55.0
55.0
68.0
92.0
105.0
113.0
118.0
180.5
118.0
190.5
118.0
76
76
100
112
166
187
187
320
187
320
187
–
–
–
–
–
–
–
58.5
–
57.0
–
19
19
24
30
36
41
50
60
50
70
55
7
7
8
10
11
14
14
17
14
17
14
20
20
30
35
45
45
55
73
55
85
55
220
210
430
670
973
1280
1982
2620
2066
3989
2200
KH1/8X
KH1/4X
KH3/8X
KH1/2X
KH5/8X
KH3/4X
KH1X
KH11/4X
KH11/4DN25X
KH11/2X
KH11/2DN25X
500
500
500
500
400
400
400
315
400
315
400
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Steel, bronzed
DIN 50938-FE//A/T4
O39
KH1/8X
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
O
Valves
KH 2-way BSPP ball valve stainless steel
Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1)
DN 4-25
1
DN 32-40
T1
DN
L1
L2
L3
L4
L5
L6
L7
L8
S1
S2
S3
Weight
g/1 piece
Order code*
PN (bar)1)
71
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1 1/4
G 1 1/2
4
6
10
12
20
25
32
40
69
75
86
92
111
122
110
120
41
41
53
55
65
71
86
92
11
14
14
16
18
20
24
26
13.7
13.7
18.0
21.0
31.0
38.0
45.0
52.2
30.0
30.0
40.0
45.0
65.0
75.0
93.2
104.4
56.5
56.5
84.5
90.0
115.0
125.0
175.0
186.0
76
76
130
130
185
185
320
320
–
–
–
–
–
–
55
60
22
22
30
32
46
50
70
80
7
7
8
10
14
14
19
19
30
30
40
45
65
75
100
110
421
422
891
1093
1944
2200
5300
7230
KH1/871X
KH1/471X
KH3/871X
KH1/271X
KH3/471X
KH171X
KH11/471X
KH11/271X
500
500
500
500
420
420
420
420
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Stainless Steel
without
O40
KH1/871X
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
Valves
KH 2-way NPT ball valve steel
Female NPT thread (SAE 476) / Female NPT thread (SAE 476)
DN 4-25
1
DN 32-40
T1
DN
L1
L2
L3
L4
L5
L6
L7
1/8-27 NPT
1/4-18 NPT
3/8-18 NPT
1/2-14 NPT
3/4-14 NPT
1-11 1/2 NPT
1 1/4-11 1/2 NPT
1 1/2-11 1/2 NPT
4
6
10
12
20
25
32
40
69
69
73
82
93
113
110
114
36
36
45
51
60
70
70
75
7.0
10.0
10.4
13.6
14.0
16.8
17.3
17.3
10.0
10.0
14.5
17.0
24.0
26.0
36.5
42.5
25
25
35
40
55
60
80
90
55.0
55.0
68.0
92.0
113.0
118.0
180.5
190.5
76
76
100
112
187
187
320
320
L8
S1
S2
S3
58.5
57.0
19
19
24
30
41
50
60
70
7
7
8
10
14
14
17
17
20
20
30
35
45
55
73
85
Weight
PN (bar)1)
g/1 piece Order code* bronzed
225
210
430
670
1280
1970
3074
3976
KH1/8NPTX
KH1/4NPTX
KH3/8NPTX
KH1/2NPTX
KH3/4NPTX
KH1NPTX
KH11/4NPTX
KH11/2NPTX
500
500
500
500
400
400
315
315
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
O
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Steel, bronzed
DIN 50938-FE//A/T4
O41
KH1/8NPTX
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
Valves
KH 2-way NPT ball valve stainless steel
Female NPT thread (SAE 476) / Female NPT thread (SAE 476)
DN 4-25
1
DN 32-40
T1
DN
L1
L2
L3
1/8-27 NPT
1/4-18 NPT
3/8-18 NPT
1/2-14 NPT
3/4-14 NPT
1-11 1/2 NPT
11/4-11 1/2 NPT
11/2-11 1/2 NPT
4
6
10
12
20
25
32
40
82
82
95
108
111
122
110
120
41
41
53
55
65
71
86
92
6.9
10.0
10.3
13.6
14.1
16.8
17.3
17.7
L4
L5
13.7 30.0
13.7 30.0
18.0 40.0
21.0 45.0
31.0 65.0
38.0 75.0
45.0 93.2
52.2 104.4
L6
L7
56.5
56.5
84.5
90.0
115.0
125.0
175.0
186.0
76
76
130
130
185
185
320
320
L8
S1
S2
S3
Weight
g/1 piece
Order code*
PN (bar)1)
bronzed
55
60
22
22
30
32
46
50
70
80
7
7
8
10
14
14
19
19
30
30
40
45
65
75
100
110
461
441
943
1177
2054
2451
5300
7230
KH1/8NPT71X
KH1/4NPT71X
KH3/8NPT71X
KH1/2NPT71X
KH3/4NPT71X
KH1NPT71X
KH11/4NPT71X
KH11/2NPT71X
500
500
500
500
420
420
420
420
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Steel, bronzed
DIN 50938-FE//A/T4
O42
KH1/8NPT71X
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
Valves
KH 3-way compact ball valve steel
EO 24° cone end / EO 24° cone end / EO 24° cone end
3
1
2
L-Version
PN (bar)1)
D1
Series
3
L)
S4 )
5
DN
L1
L2
L3
06
08
10
12
15
18
22
28
08
10
12
14
16
20
25
30
4
6
8
10
12
16
20
25
4
6
8
10
12
16
20
25
67
67
75
75
83
82
99
108
73
73
77
81
87
90
107
120
53
53
61
61
69
67
84
93
59
58
62
65
70
69
83
93
15,0
15,0
14,5
14,5
22,0
25,0
29,0
31,0
15,0
15,0
14,5
14,5
22,0
25,0
29,0
31,0
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
L4
L5
L6
30
59,5 76
30
59,5 76
35
67,5 100
35
67,5 100
45
96,5 112
50 110,0 166
60 126,0 187
65 131,0 187
30
59,5 76
30
59,5 76
35
67,5 100
35
67,5 100
45
96,5 112
50 110,0 166
60 126,0 187
65 131,0 187
L7
L8
L9
L10
S1
S2
S3
S4
Weight
g/1 piece
33,5
33,5
37,5
37,5
41,5
41
49,5
54
36,5
36,5
38,5
40,5
43,5
45
53,5
60
26,5
26,5
30,5
30,5
34,5
33,5
42,0
46,5
29,5
29,0
31,0
32,5
35,0
34,5
41,5
46,5
82
82
90
90
99
99
116
126
88
90
94
100
106
112
131
146
41,0
41,0
45,0
45,0
49,5
49,5
58,0
63,0
44,0
45,0
47,0
50,0
53,0
56,0
65,5
73,0
19
19
24
24
30
36
41
50
19
19
24
24
30
36
41
50
7
7
8
8
10
11
14
14
7
7
8
8
10
11
14
14
30
30
40
40
45
50
55
65
30
30
40
40
45
50
55
65
14
17
19
22
27
32
36
41
19
22
24
27
30
36
46
50
317
214
445
537
678
850
1340
2274
350
300
469
500
909
949
1714
2462
Order code*
bronzed
KH3/2-06LX
KH3/2-08LX
KH3/2-10LX
KH3/2-12LX
KH3/2-15LX
KH3/2-18LX
KH3/2-22LX
KH3/2-28LX
KH3/2-08SX
KH3/2-10SX
KH3/2-12SX
KH3/2-14SX
KH3/2-16SX
KH3/2-20SX
KH3/2-25SX
KH3/2-30SX
500
500
500
500
500
400
400
400
500
500
500
500
500
400
400
400
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surfa ce
and material
Steel, bronzed
DIN 50938-FE//A/T4
O43
KH3/2-06LX
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
O
Valves
KH 3-way compact BSPP ball valve steel
Female BSPP thread (ISO 1179-1) / Female BSPP thread (ISO 1179-1) /
Female BSPP thread (ISO 1179-1)
1
T1
DN
L1
L2
L3
L4
L5
L6
L7
L8
S1
S2
S3
Weight
g/1 piece
Order code*
PN (bar)1)
bronzed
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G1
4
6
10
12
20
25
69
69
73
82
93
118
36
36
45
51
60
70
12
12
14
15
18
20
15.0
15.0
14.5
22.0
29.0
31.0
30
30
35
45
60
65
55
55
68
92
113
118
76
76
100
112
187
187
34.5
34.5
36.5
41.0
48.0
56.5
19
19
24
30
41
50
7
7
8
10
14
14
30
30
40
45
55
65
270
342
563
932
1724
2643
KH3/2-1/8X
KH3/2-1/4X
KH3/2-3/8X
KH3/2-1/2X
KH3/2-3/4X
KH3/2-1X
500
500
500
500
400
400
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.
3
1
2
L-Version
*Please add the suffixes
below according to the material/
surface required.
Material
Order code suffixes
Suffix
Example
surface
and material
Steel, bronzed
DIN 50938-FE//A/T4
O44
KH3/2-1/8X
Standard
sealing material
(no additional.
suffix needed)
POM / NBR
Catalogue 4100-7/UK
Valves
ELA air-bleed valves
Hydraulic systems can effectively be bled with ELA air-bleed valves.
Easily installed – maintenance-free – almost unlimited service life – simple – safe – reliable – efficient. The
system can be operated immediately. No control irregularities due to air contamination of the pressure medium.
Cost saving, as non-productive de-aeration time is saved.
Air bleed between: – opening pressure 0.05 bar
– closing pressure 0.5 bar
BEFORE BLEEDING
System without pressure
AIR ESCAPES
System operated
(0,05 bar)
The principle of the air-bleed valve is based on the difference in behaviour of gases and liquids under pressure
because of their dependence on viscosity. A piston,
housed in the bore of the body with defined clearance, effects the opening and closing of the valve on start-up or
shut-down of the system. On setting the system in operation, the accumulated air escapes until the liquid column of
the pressure medium reaches the piston. The pressure of
the liquid lifts the piston against the upper, high pressure
seal,
securely
closing
the
air-vent (slight oil discharge may occur). When pressure is
released the spring releases the piston reopening the airvent, whereupon the procedure may be repeated.
The special piston design prevents any intake of air
in case of partial vacuum.
AIR REMOVED
System under pressure
( 0,5 bar)
The air bleed valve should be connected vertical, at the
highest point of the hydraulic system or in places where
air accumulation may occur.
ELA air-bleed valves are available only for mineral oil
based fluids, and within the temperature limits of
–20 °C to +90 °C.
O45
Catalogue 4100-7/UK
O
Valves
ELA Air-bleed valves
Male BSPP thread with Eolastic seal
Dry Technology
Steel
Weight
g/1 piece
400
ELA1/4EDA3C
109
∅6
69,5
23
PN
(bar)
12
SW22
Eolastic
seal
G 1/4 A
EO Swivel
Weight
g/1 piece
315
ELAE10LA3C
125
∅6
77,5
Steel
23
Dry Technology
SW22
SW19
17
PN
(bar)
∅ 10
O-ring
M 16×1,5
O46
Catalogue 4100-7/UK