October 1, 2009 - 400 Hertz Engineering Home Page

VALUE DIAMOND TOOL COMPANY
AND
400 HERTZ ENGINEERING
FALL
CLEARANCE
SALE
October 1, 2009 - November 30, 2009
REGULAR
PRICE
SALE
PRICE
$4,675
$3,000
CD-C500-5LS
4 Speed (200 - 725 RPM) Core Drill Unit
Features
The CD-C500-5LS is a 4 speed Cardi Gearbox powered by a
5HP/400HZ water cooled motor used mostly for general purpose drilling of large holes.
The RPM range for this drill unit has a 3:3 spread and it’s output speeds are approximately 200, 325, 475 and 725 RPM.
The gearbox is protected with an internal slip clutch has a solid
output shaft for accurate starting and drilling of holes.
It is designed to be used with any 3” or larger column core drill
machines and matching SB-400-15 Switchbox.
It is well suited for drilling holes between 3” and 20” diameter.
Specifications:
•
Weight:
32 Lbs
•
Length:
18.5”
•
Bit RPM:
200/325/475/725
•
Output Shaft:: 1¼” X 7
•
Motor:
5 H.P.
200 Volts
15 Amps
400 HZ
3-Phase
6,000 RPM
2
REGULAR
PRICE
SALE
PRICE
$4,675
$3,000
CD-C500-7.5MS
4 Speed (400 - 1,450 RPM) Core Drill Unit
Features
The CD-C500-7.5MS is a medium RPM 4 speed Cardi Gearbox
powered by a 7½ HP/400HZ water cooled motor, designed for
rapid drilling with our new generation of diamond bits designed
to cut both concrete and reinforcing steel at high RPM without
becoming dull.
The RPM range of this core drill unit has a 3:3 spread and its
output speeds are approximately 400, 650, 950 and 1,450. The
gearbox is protected by an internal slip clutch and has a solid
output shaft for accurate starting and drilling of holes.
It is designed to work on any core drill machine with 3” or larger
columns and matching SB-400-25 Switchbox.
It is best suited for drilling holes between 1” and 12” diameter.
Specifications:
•
Weight:
32 Lbs
•
Length:
18.5”
•
Bit RPM:
400/650/950/1,450
•
Output Shaft:: 1¼” X 7
•
Motor:
3
7½ H.P.
200 Volts
25 Amps
400 HZ
3-Phase
12,000 RPM
REGULAR
PRICE
SALE
PRICE
$5,495
$3,500
CD-C500-10MS
4 Speed (400 - 1450 RPM) Core Drill Unit
Features
The CD-C500-10MS is a 4 speed Cardi Gearbox powered by a
10 HP/400HZ water cooled motor and is designed for high
speed drilling of holes. It is especially beneficial when using our
new generation of high RPM core bits that cut steel without becoming dull.
The RPM range for this drill unit has a 3:3 spread and it’s output speeds are approximately 400, 650, 950 and 1450 RPM.
The gearbox is protected with an internal slip clutch and has a
solid output shaft for accurate starting and drilling of holes.
It is designed to be used with any 2½” or 3” size column core
drill stand and SB-400-35 Switchbox.
It is best suited for drilling holes between 1” and 12” diameter.
Specifications:
•
•
•
•
Weight:
Length:
Bit RPM:
32 Lbs
18.5”
400/650/
950/1450
Output Shaft : 1¼” X 7
Motor: 10 H.P.
200 Volts
35 Amps
400 HZ
3-Phase
24,000 RPM
4
REGULAR
PRICE
SALE
PRICE
$5,495
$3,500
CD-C500-10HS
4 Speed (800 - 2900 RPM) Core Drill Unit
Features
The CD-C500-10HS is a 4 speed Cardi Gearbox powered by a
10 HP/400HZ water cooled motor and is designed for high
speed drilling of small holes. It is especially beneficial when using our new generation of high RPM core bits that cut steel
without becoming dull.
The RPM range for this drill unit has a 3:3 spread and it’s output speeds are approximately 800, 1300, 1900 and 2900 RPM.
The gearbox is protected with an internal slip clutch and has a
solid output shaft for accurate starting and drilling of holes.
It is designed to be used with any 2½” or 3” size column core
drill stand and SB-400-35 Switchbox.
It is best suited for drilling holes between ¼” and 6” diameter.
Specifications:
•
•
•
•
Weight:
Length:
Bit RPM:
32 Lbs
18.5”
800/1300/
1900/2900
Output Shaft : 1¼” X 7
Motor: 10 H.P.
200 Volts
35 Amps
400 HZ
3-Phase
24,000 RPM
5
REGULAR
PRICE
SALE
PRICE
$4,200
$3,000
CD-C800
4 Speed / Heavy Duty Core Drill Gearbox
Features
The CD-C800 is a 4 speed Cardi high torque gearbox that is very good for drilling deep or large holes
up to 30” diameter.
It will accept most 400 HZ motors with a 3½” X 3½”
flange mount and ⅝” spline coupler (AN2001). It has
approximately a 3.7:1 ratio between low & high gear.
It is super strong, light weight and is well liked by drillers.
Accessories:
• Various CD Switchboxes
• Various 400 HZ Motors
• MI-502 Gearboxes
(Step up or Down)
• CD-C800 MA Motor Adaptor
• 7½ - 12.5 Horsepower Motors
• Recommended for 3” - 24” Drilling
Specifications:
•
•
•
Weight: 32 pounds (W/O Motor)
1 ¼” X 7 Output Shaft
RPM (Depending on Motor)
INPUT
1st
2nd
3rd
4th
1,500
105
170
272
367
2,000
140
230
365
525
3,000
210
340
545
785
6,000
420
680
1,090
1,570
12,000
840
1,360
2,180
3,140
6
REGULAR
PRICE
SALE
PRICE
$5,000
$3,500
CD-C1000
4 Speed/ Heavy Duty Core Drill Gearbox
Features:
The CD-C1000 is a 4 speed high torque gearbox that
is an excellent choice for large diameter and deep
core drilling. It is capable of drilling holes up to 60” in
diameter.
It will accept most 400 HZ motors with a 3½” X 3½”
flange mount and 5/8“ spline coupler drive (AN2001). It
has approximately a 3.7:1 ratio between low and high
gear.
It is very strong and very well liked by core drillers.
Accessories:
• CD-C1000 MA Motor Adaptor
• MI-502 Gearboxes (Step Up or Step Down)
• 7½ - 15 HP Motors
• Various 400 HZ Switchboxes
Specifications:
•
Size: 15”H X 11”D X 7”W
•
Weight: 46 Lbs
INPUT
1st
2nd
3rd
4th
2,000
42
65
107
153
3,000
62
96
158
227
4,000
82
128
210
301
6,000
125
194
319
458
12,000
250
388
638
916
7
REGULAR
PRICE
SALE
PRICE
$750
$450
CD-C1000 MA
&
CD-C800 MA
Motor Adaptor
Features:
The CD-C800 MA & CD-C1000 MA
are two-bearing motor adaptors that
adapt a 3½” X 3½” X 5/8” spline (AN2001) to a Cardi C-800 and C1000
gear box.
Specifications:
•
Weight: 6 Lbs
•
Size: 5” Diameter X 3” Thickness
8
7½ HP MECO
High Speed Conversion
7 1/2 HP / 400 HZ / 25 Amp / Air Cooled
42 Pounds / 20” Long
RPM 1,750 / 3,660 / 5,480 / 11,415
Low, Low Demo Time Only!
$2,500
9
7½ HP MECO
400 HZ Core Drill
Specifications:
•
Weight:
42 Lbs
•
RPM:
1 - 119
2 - 245
3 - 366
4 - 767
•
Amps:
25
NEW
$3,000 each
10
REGULAR
PRICE
SALE
PRICE
$600
$450
120 Volt
Small Core Drill
Specifications:
•
Height
17”
•
Weight:
14 Lbs
•
RPM:
1 - 860
2 - 1,890
11
NEW
SALE
PRICE
$2,500
CD-458-120
120 Volt Core Drill Unit
Features:
The CD-458-120 is a 120V/25AMP/60HZ core
drill unit with eight different Bit RPM speeds. It
is a “universal” core drill motor that is able to
drill large holes at low speed and small holes
and high speed. It is longer necessary to carry
3 or 4 core drill motors for your miscellaneous
drilling.
The RPM speed ratio is approximately 10:1 between low and high gear. Operators report satisfactory drilling from 1”-14” diameter holes.
Specifications:
•
Weight:
33 Lbs
•
Length:
25”
•
Bit RPM:
300 / 514 / 680 / 840 / 1,130 / 1,400 / 1,825 / 2,880
•
Motor:
120 Volts
25 Amps
12
REGULAR
PRICE
SALE
PRICE
$1,045
$700
MECO
2 ⅞ Column Drill Stand
The standard of the
Core Drilling Industry.
Specifications:
•
Carriage:
19 Lbs
•
42” Column:
34 Lbs
•
Large Base:
35 Lbs
•
Smalle Base:
13 Lbs
13
REGULAR
PRICE
SALE
PRICE
$4,000
$2,500
CV-400-15-240
15 KW Static Converter
Features
(Single Or 3 Phase Input)
The CV-400-15-240 is a lightweight, portable, solid state device designed for converting 200 - 250V 60HZ single phase or
200 - 250V 60HZ 3-phase power into
200V/3-phase/400HZ power for drilling, flat
sawing or wall sawing.
It’s primary use is in high rise buildings
where 400 HZ power is not conveniently
available, and in “sealed” buildings like telephone companies and hospitals where no
access is available to the outside for power
cords.
The CV-400-15-240 is noiseless, generates
little heat, and is very desirable for use in
occupied buildings for 400HZ motors up to
20 horsepower.
Specifications:
•
Weight:
36 Pounds
•
Size:
9” W X 13” H X 20” L
•
Electrical
Input:
16 KW
200 - 250 Volts
Single or 3 Phase
60 HZ
Output: 15 KW
60 Amps
200 Volts
400 HZ
3 Phase
* Single Phase Input may require down rating
output.
14
REGULAR
PRICE
SALE
PRICE
$25,000
$12,500
75 HP Mazda Flat Saw
4 Speed “Mercury” Gearbox
Features:
A new “El Torito” Meco flat
saw fitted with a 4 speed
“Mercury” gearbox and 75
HP Mazda rotary engine.
This unit is new and
has been tested for only a
few hours.
NEW
15
REGULAR
PRICE
SALE
PRICE
$39,995
$15,000
FS-400-LSP-3G
30 Or 40 H.P. Large Self Propelled 3 Speed Flat
Features:
The FS-400-LSP-3G is a Meco 42
WC saw frame and three speed
gear box powered with a 40
HP/400HZ electric motor.
This is the ultimate design for high
production inside flat saws. It will
make large amounts of revenue because of the ability to control the
blade RPM for optimum cutting
speed and minimal blade wear.
Accessories:
•
•
•
•
FS-507 45# weights
Night lights
Lifting frame
Needle valve water control
Specifications:
•
Self Propelled: 0-240 RPM
•
Weight: 900 Lbs (approx.)
•
Size:
•
Blade RPM: High
2,700
Medium 1,800
Low
1,200
•
Arbor Size: 1” w/ Pin hole
•
Roller Bearing Arbor
Motor:
43”H X 29”W X 42”L
30 HP
200 Volts
90 Amps
3 Phase
400 HZ
2,600 RPM
40 HP
200 Volts
120 Amps
3 Phase
400 HZ
2,600 RPM
16
REGULAR
PRICE
SALE
PRICE
$6,995
$3,000
FS-900
400 HZ Electric “Crete Mower”
Features
The FS-900 is a horizontal surface grinder
designed for the leveling of irregular concrete slabs. Its 400 HZ electric motor drive
allows the use of this machine both inside
and outside of buildings without obnoxious
gas fumes and noise.
It is lightweight, portable and will work with
a variety of different horse power 400 HZ
motors for different grinding applications.
The FS-900 is especially well suited for the
inside applications using the CV-400 Static
Converters and a 7½ horsepower motor.
Accessories:
•
•
•
FS-507 45# Ballast Weights
400HZ Electric Motors
SB-400 Switchboxes
Specifications:
•
Size:
18”W X 30”H X 42”L
•
Weight:
150 lbs + motor
•
Drive:
Belts from 400HZ
Motor Adaptor
•
Weights: (3) 45# FS-507
17
REGULAR
PRICE
SALE
PRICE
$1,295
$700
FS-407
Flat Saw Motor Mount
5 H.P. - 25 H.P. Pedestal Motor Mount
For 400 HZ Spline Drive Motors
Features
The FS-400 Motor Mount will adapt
almost any 400HZ motor with a 3½” X
3½” motor flange using a ⅝” spline
coupling for use on a flat saw.
The output shaft of the FS-400 is designed to be used with 3 or 4 Gates 3
-V style belts. To have an electric flat
saw will give both your wall saw and
core drill trucks the ability to substantially increase monthly revenue.
Specifications:
•
Size:
9” X 9” X 9”
•
Hold Down: (4) 5/16” studs
•
Weight:
•
3½” x 3½” mount with 5/8” spline
coupling
13 Lbs
18
Equipment Conversions
Convert Your Extra Saw Frames To 400 HZ Electric
Power With An FS-407 Motor Adaptor Stand
FS-407 Special $700.00
19
REGULAR
PRICE
SALE
PRICE
$10,000
$7,000
GN-400-10G
10 KW Engine-Generator Set
Features
The GN-400-10G generator set is a low
speed, long life power supply designed to run
400HZ concrete cutting equipment up to 12.5
Horsepower.
It features good motor starting capability and a
V/F voltage regulator so an optional automatic
idle down system can be installed on the engine to reduce fuel consumption and wear.
Engines Available:
•
•
•
•
•
Generac
Kohler
Briggs & Stratton
Honda
Wisconsin
Specifications:
•
Size:
22” W X 20” H X 34” L
•
Weight:
250 Lbs approx
•
Generator:
10 Kilowatt
200 Volts
35 Amps
400 HZ
3-Phase
•
Engine (Various)
20
REGULAR
PRICE
SALE
PRICE
$13,000
$8,500
GN-400-20G
20 KW Engine-Generator Set
Features
The GN-400-20G generator
set is a low speed, long life
power supply designed to run
400HZ concrete cutting equipment up to 25 Horsepower.
It features good motor starting
capability and a V/F voltage
regulator so an optional automatic idle down system can be
installed on the engine to reduce fuel consumption and
wear.
Engines Available:
•
Nissan
•
Wisconsin
•
Kobota
•
Hyundai
Specifications:
•
Size:
37” W X 31” H X 24” L
•
Weight:
325 Lbs (approx.)
•
Generator: 20 Kilowatt
200 Volts
70 Amps
400 HZ
3-Phase
•
Engine (Various)
21
REGULAR
PRICE
SALE
PRICE
$18,995
$12,000
GN-400-20D
20 KW DIESEL GENERATOR
Features
The GN-400-20D is a lightweight
diesel powered 400 HZ generator
that is small in size and big in
power.
It will operate any 400 HZ motor
up to 25 HP and do it day in and
day out without breaking into a
sweat.
The footprint of this generator is
20” wide X 44” long taking up very
little space in your truck.
Specifications:
•
Wieght:
Approx 800 Lbs
•
Size:
20” W X 44” L X 44” H
•
Engine:
49HP (Tier II) Lambordini
Diesel
•
Output:
20KW
200V
400HZ
3 Phase
75 Amps
22
REGULAR
PRICE
SALE
PRICE
$1,250
$750
SMALL GENERATOR MOUNT
23
REGULAR
PRICE
SALE
PRICE
$2,000
$1,000
LARGE GENERATOR MOUNT
24
20 KW
Bendix 28B-135-5
400 Hertz Generator And Drive Unit
Weight:
Size:
55 Pounds Total
20” L X 7” H X 6” D
Special Generator & Drive $2,000
25
96 KW
Bendix 28B94-15-A
400 Hertz Generator And Drive Unit
Weight:
Size:
170 Pounds Total
27” L X 14” H X 11½D
Special Generator & Drive $3,000
26
***Used***
20KW - 400HZ GEN - SET
New, Control Box & Regulator
$6,000.00
27
ALMOST NEW!
LESS THAN 50 HOURS!
Kurz & Root Generator Sets
•
•
•
•
•
•
60 KW
3-Phase
400 HZ
Allis Chalmers 6 Cylinder Diesel Engine
4,400 Lbs
87” L X 36” W X 59” H
$5,000 Each
28
29
REGULAR
PRICE
SALE
PRICE
$5,000
$3,500
HS-400-16
16” 400HZ Hand Saw
Features
The HS-400-16 is a heavy duty 400 HZ
powered Cardi Hand Saw designed to
accept blades up to 16” in diameter.
The motor and electronic power switch
are hermetically sealed for corrosion
resistance and long life.
There are LED’s that indicate proper
motor load, heavy running load, and
overload so operators can visually see
proper cutting load.
This saw will cut up to 6½” deep.
Specifications:
•
Size:
25” L X 12” W X 11” H
•
Weight:
39 lbs
•
Max Blade Size: 16”
•
RPM:
2,600
•
Motor:
10 HP
35 Amps
200 Volts
400 HZ
3 Phase
24,000 RPM
30
REGULAR
PRICE
SALE
PRICE
$3,000
$1,500
ME-400-7.5 A/C
7.5 HP / Air Cooled Motor
Features
This is a totally enclosed,
air cooled, 7½ HP motor
that is perfect for floor grinders, small concrete saws,
pressure washers, light duty
wall saws and other special
equipment.
Specifications:
200 Volts
27 Amps
400 Hertz
2,650 RPM
28 Lbs
⅝” Spline Output
31
REGULAR
PRICE
SALE
PRICE
$3,000
$1,500
ME-400-8PWC
7.5 HP / 6,000 RPM / Water Cooled Motor
Features:
The ME-400-8PWC is a 6,000 RPM
motor made to bolt directly to a CDC800 or a CD-C1000 motor adaptor.
This motor will give proper RPM and
high torque for drilling deep holes and
is very well liked for this application.
Accessories:
•
SB-400-25 Switchbox
•
MI-502 Gearbox System
1.5:1/ 2:1/ 3:1/ 4:1
Specifications:
•
Size:
6” Diameter X 7” Length
•
Weight:
26 Lbs
•
Motor:
7.5 HP
200 Volts
28 Amps
3 Phase
400 HZ
6,000 RPM
32
REGULAR
PRICE
SALE
PRICE
$3,000
$1,500
ME-C500-7.5AC
7.5 HP/ 400HZ Air Cooled Motor
Features:
The ME-C500-7.5AC is an air cooled,
totally sealed motor designed for use
with a CD-C500 Cardi Gearbox. It is a
good choice for applications where dry
drilling is required.
Accessories:
•
SB-400-25 Switch Box
Specifications:
•
Size:
6” Diameter X 9½” Length
•
Weight:
15 Lbs
•
Motor:
200 Volts
25 Amps
3 Phase
400 HZ
7.5 HP
12,000 RPM
33
REGULAR PRICE
Rotor
SALE PRICE
Stator
Rotor
Stator
$1,250 $1,500
$500
$750
NEW 400HZ MOTOR PARTS
These heavy duty replacement parts can be used to bring
your old wall saws / flat saw motors up to 100% rated
power and keep them running cool for years.
Specifications: 20 HP / 12,000 RPM / 400 HZ / 60 Amp / 200 Volt
ROTOR
STATOR
3.500” Diameter
5.250” Diameter
3.020” Length
2.545” Stack Length
5.4 Lbs
5.0” Overall Length
9.0 Lbs
34
REGULAR PRICE
SALE PRICE
Rotor Stator
Rotor
$750 $1,000
$100
Stator
$200
NEW 7½ HP/12,000 RPM MOTOR PARTS
Why waste money re-winding when you can buy new and
have 100% of power and cool running motors.
Specifications: 7½ HP / 12,000 RPM / 400 HZ / 25 Amp / 200 Volt
ROTOR
STATOR
2.530” Diameter
4.250” Diameter
2.847” Length
2.450” Stack Length
3.0 Lbs
4.540” Overall Length
6.0 Lbs
*Fits All Medium Speed 400 HZ Milwaukee Motors & Hand Saws
35
REGULAR PRICE
SALE PRICE
Rotor
Stator
Rotor
Stator
$750
$1,000
$100
$200
NEW 5HP / 6,000 RPM MOTOR PARTS
Why waste money re-winding when you can buy new and
have 100% of power and cool running motors.
Specifications: 5 HP / 6,000 RPM / 400 HZ / 15 Amp / 200 Volt
ROTOR
STATOR
2.560” Diameter
4.250” Diameter
3.145” Length
2.697” Stack Length
4.3 Lbs
4.560” Overall Length
5.0 Lbs
*Fits All Low Speed 400 HZ Milwaukee Motors
36
REGULAR
PRICE
SALE
PRICE
$4,000
$2,000
ME-400-12.5WC
12.5 HP / 400 HZ / Water Cooled Motor
Features:
The ME-400-12.5WC is a lightweight 12.5 HP
water cooled 400 HZ modular style motor
specifically designed to run on 10 KW
invertors and generators.
It can be used with the MI-502 (Step Up-Step
Down) gearbox system which allows
2700 RPM and 2000 RPM output speeds.
Accessories:
• MI-502 Gearbox System
2:1, 3:1, 4:1 ratios
Specifications:
•
Size:
•
Weight:
25 Lbs
•
Motor:
12.5 HP
200 Volts
35 Amps
3 Phase
400 HZ
8,000 RPM
37
7” Diameter X 6” Length
REGULAR
PRICE
SALE
PRICE
$3,000
$2,000
ME-400-20WC
20 HP / 400 HZ / Water Cooled Motor
Features
The ME-400-20WC is a lightweight 20
HP water cooled 400 HZ modular style
motor built for maximum reliability.
It uses the MI-502 gearbox system
which allows 8000 RPM, 6000 RPM,
4000 RPM and 3000 RPM output
speeds.
Accessories:
•
MI-502 Gearbox System
1.5:1, 2:1, 3:1, 4:1 ratios
Specifications:
•
Size: 7” Diameter X 7” Length
•
Weight:
32 lbs
•
Motor:
20 HP
200 Volts
60 Amps
3 Phase
400 HZ
12,000 RPM
38
REGULAR
PRICE
SALE
PRICE
$5,000
$2,500
ME-400-30AC
30 HP / 400 HZ / Air Cooled Motor
Features:
The ME-400-30AC is a
big, strong, lightweight, air
-cooled electric motor that
is an excellent choice for
high production flat sawing. It is a 12,000 RPM
motor with a heavy duty
gearbox and 1⅜” output
shaft.
This motor can easily
replace gasoline or diesel
engines on your extra flat
saw with its 2,600 RPM
output speed.
Specifications:
•
Size:
20” L X 10”W X 14” H
•
Weight::
135 Pounds
•
Output RPM: 2,600
•
Motor:
39
12,000 RPM
200V
90A
3 Phase
400HZ
1⅜” Output Shaft
REGULAR
PRICE
SALE
PRICE
$5,000
$2,500
ME-400-40AC
40 HP / 400 HZ / Air Cooled Motor
Features:
The ME-400-40AC is a
big, strong, lightweight, air
-cooled electric motor that
is an excellent choice for
high production flat sawing. It is a 12,000 RPM
motor with a heavy duty
gearbox and 1⅜” output
shaft.
This motor can easily
replace gasoline or diesel
engines on your extra flat
saw with its 2,600 RPM
output speed.
Specifications:
•
Size:
20” L X 10”W X 14” H
•
Weight::
135 Pounds
•
Output RPM: 2,600
•
Motor:
12,000 RPM
200V
120A
3 Phase
400HZ
1⅜” Output Shaft
40
REGULAR
PRICE
SALE
PRICE
$1,000
$750
MI-502
Gearbox System
(1.5:1, 2:1, 3:1, 4:1 Ratios)
Features
The MI-502 gearbox system is required to be used with
ME-420; ME-425, and ME-430 400HZ motors. They
can also be used as supplementary gearboxes for your
existing motors to speed up or slow down your diamond
cutting tools.
These gearboxes all use AN-2001 flanges for both input
and output and ⅝ spline couplings for both input and
output drives. This means the gearboxes can be mixed
and matched to get almost any RPM you require, either
lower or higher than previously possible.
For example: a wall saw gearbox using a 3,000 RPM
motor has output speed of 1,000 RPM. For sawing special jobs with large blades you could insert an MI-502-2
with a 1.5:1 ratio that would produce a 668 RPM output
speed or the MI-502-3 with a 2:1 ratio which would produce a 500 RPM output speed, or the MI-502-4 with a
3:1 ration would produce 333 RPM output speed or the
MI-502-5 with 4:1 ratio would produce 250 RPM output
speed.
Specifications:
•
•
•
•
Size:
Weight:
Ratios:
4½” X 7” X 5”
8 Lbs
MI-502-2
1.50:1
MI-502-3
2.00:1
MI-502-4
3.00:1
MI-502-5
4.00:1
⅝ Spline Drive Both Input & Output.
41
REGULAR
PRICE
SALE
PRICE
$795
$350
SB-400-15
15 AMP CORE DRILL SWITCHBOX
Features
The SB-400-15 is a rugged, cast aluminum switchbox that is used with the
matching 200V, three phase, 400HZ
electric motors that power our range of
core drills, slab saws, and other concrete cutting equipment.
The ampmeter is a sealed, high reliability type that reads in percentage of
loads with a red zone to indicate motor
overload.
The Switchbox has one 73 Amp inlet
plug and one 73 Amp output plug for
simplicity.
Additional outlet plugs, available with or
without controlling switches can be
added to the switchbox for convenience.
Specifications:
•
Size:
4½” X 4½” X 8½”
•
Weight:
6 Pounds
•
Capacity: 15 Amps (5 HP)
200 Volts
400 HZ
3-Phase
42
42
REGULAR
PRICE
SALE
PRICE
$795
$350
SB-400-25
25 AMP CORE DRILL SWITCHBOX
Features
The SB-400-25 is a rugged, cast aluminum switchbox that is used with the
matching 200V, three phase, 400HZ
electric motors that power our range of
core drills, slab saws, and other concrete cutting equipment.
The ampmeter is a sealed, high reliability type that reads in percentage of
loads with a red zone to indicate motor
overload.
The Switchbox has one 73 Amp inlet
plug and one 73 Amp output plug for
simplicity.
Additional outlet plugs, available with or
without controlling switches can be
added to the switchbox for convenience.
Specifications:
•
Size:
4½” X 4½” X 8½”
•
Weight:
6 Pounds
•
Capacity: 25 Amps (7½ HP)
200 Volts
400 HZ
3-Phase
43
43
REGULAR
PRICE
SALE
PRICE
$795
$350
SB-400-35
35 AMP SWITCHBOX
Features
The SB-400-35 is a rugged, cast aluminum switchbox that is used with the
matching 200V, three phase, 400HZ
electric motors that power our range of
core drills, slab saws, and other concrete cutting equipment.
The ampmeter is a sealed, high reliability type that reads in percentage of
loads with a red zone to indicate motor
overload.
The Switchbox has one 73 Amp inlet
plug and one 73 Amp output plug for
simplicity.
Additional outlet plugs, available with or
without controlling switches can be
added to the switchbox for convenience.
Specifications:
•
Size:
4½” X 4½” X 8½”
•
Weight:
6 Pounds
•
Capacity: 35 Amps (10 HP)
200 Volts
400 HZ
3-Phase
44
44
REGULAR
PRICE
SALE
PRICE
$849
$400
SB-400-45
45 AMP CORE DRILL SWITCHBOX
Features
The SB-400-45 is a rugged, cast aluminum switchbox that is used with the
matching 200V, three phase, 400HZ
electric motors that power our range of
core drills, slab saws, and other concrete cutting equipment.
The ampmeter is a sealed, high reliability type that reads in percentage of
loads with a red zone to indicate motor
overload.
The Switchbox has one 73 Amp inlet
plug and one 73 Amp output plug for
simplicity.
Additional outlet plugs, available with or
without controlling switches can be
added to the switchbox for convenience.
Specifications:
•
Size:
51/8” X 5½” X 8½”
•
Weight:
7 Pounds
•
Capacity: 45 Amps (15 HP)
200 Volts
400 HZ
3-Phase
45
45
REGULAR
PRICE
SALE
PRICE
$849
$400
SB-400-60
60 AMP CORE DRILL SWITCHBOX
Features
The SB-400-60 is a rugged, cast aluminum switchbox that is used with the
matching 200V, three phase, 400HZ
electric motors that power our range of
core drills, slab saws, and other concrete cutting equipment.
The ampmeter is a sealed, high reliability type that reads in percentage of
loads with a red zone to indicate motor
overload.
The Switchbox has one 73 Amp inlet
plug and one 73 Amp output plug for
simplicity.
Additional outlet plugs, available with or
without controlling switches can be
added to the switchbox for convenience.
Specifications:
•
Size:
51/8” X 5½” X 8½”
•
Weight:
7 Pounds
•
Capacity: 60 Amps (20 HP)
200 Volts
400 HZ
3-Phase
46
46
REGULAR
PRICE
SALE
PRICE
$849
$400
SB-400-__-CB
CIRCUIT BREAKER SWITCHBOX
Features
These switchboxes will prevent overload of
your matching 400HZ motors, keeping the
cost to operate very low.
Heat is the enemy of all electric motors
and preventing overload will give you long
bearing life and substantially cut down motor rewind problems.
Specifications:
•
Long circuit breaker delay at motor
start to allow motors to get to speed.
•
0 - 125% meter to monitor load on
motor.
•
Same size and weight as a standard
switchbox.
•
15 / 25 / 35 / 45 / 60 / 75 Amp
capacities available.
47
REGULAR
PRICE
SALE
PRICE
$3,500
$2,500
SB-400-120R
120 Amp/400 HZ Reversing Switchbox
Features
The SB-400-120R is a rugged lightweight
motor controller used primarily to control
wall saws and slab saw motors.
It has both a voltmeter and amp meter so
the operator can run the motor at it’s maximum efficiency.
The switchbox has one 73 Amp input and
one 73 Amp output plug for economy and
simplicity.
Additional output plugs, available with or
without controlling switches can be added to
the switchbox for convenience.
It has a rotary reversing switch to quickly
change the rotation direction of the diamond
tool. Convenient rear mounted hooks are
provided for hanging this switchbox from a
ladder or other locations.
Specifications:
•
Size:
8” W X 9” H X 12” L
•
Weight:
16 Pounds
•
Capacity: 120 Amps (40 HP)
200V
400 HZ
3-Phase
•
48
REGULAR
PRICE
SALE
PRICE
$3,995
$1,500
MI-409
400HZ WATER PUMP
Features
The MI-409 water pump is a powerful, low RPM 400HZ motor and
brass gear water pump that can be
adjusted to over 100# of pressure
and run for years without problems.
If uses a military circuit breaker for
On/Off and for motor protection in
case of problems.
Specifications:
•
Current Draw @ 70# line pressure
9.0 Amps.
•
200 Volt
•
3 Phase
•
400 HZ
•
8.6 Amps at Idle
•
1,600 RPM
•
Circuit Breaker protected
49
REGULAR
PRICE
SALE
PRICE
$2,500
$1,500
VC-400-5
400HZ VACUUM HEAD
Features
A powerful 5 HP 400HZ motor is installed in
a Tornado vacuum head for long service life
and rapid water pickup.
Many inside cutting jobs take as long to
clean up as they do to cut using 120V vacuums. Change to the VC-400-5 and save
lots of clean up time on our inside service
jobs.
Specifications:
•
5 HP Motor
•
15 Amps
•
200 Volt
•
400 HZ
•
3 Phase
•
24,000 RPM
•
More than double the air flow of
120V Vacuums.
50
5/8” Spline
Couplers
$15.00 ea
Standard Milwaukee Size Gears & Shafts For 400HZ
Milwaukee Core Drill Conversions
$75.00 Set (Rotor Shaft & Mating Gear)
51
Improve Your Flat Sawing Speed
By Holding The Blade In The Cut
FS-507 Cast Steel Saw Weights
$99 Each
With Lifting Handle
"Weight Pin" Holes In Bottom
Electrical Connectors
(With Quick Disconnects)
400 HZ / 73 Amp Cord Ends
$40.00 each
$40.00 each
400 HZ / 73 Amp Panel Mount Plugs
$60.00 each
$40.00 each
52