CT130-EHS | CT130-DHSG | CT130

Transcription

CT130-EHS | CT130-DHSG | CT130-CALOG
Wireless headset systems on
Siemens LF-workstation switch USB-Adapter CT130
Page 1 of 12
Product
characteristics
Plantronics wireless headset systems on Siemens NFworkstation switch USB-Adapter CT130
The EHS-adapters in the version CT130-EHS, CT130-DHSG and CT130-CALOG are
adaptation moduls between the Siemens NF-workstation-switch-USB-Adapter and the
wireless headset solutions of the companies Plantronics, Sennheiser and GN Netcom.
The adapter versions differ in functionality and purpose.
The business version (CT130-EHS supports the wireless Plantronics headset systems
CS60, CS70, CS351/361 as well as Savi Office. The connection works by using the digital
control output - Plantronics Serial Bus - (PSB) of the headset cradle.
The robust Plantronics wireless headset solution was developed for a 24/7 use in control
centers. A modified solution with integrated logic control and additional features is called
CALOG. Apart from the call answer and termination exists a special highlight in the
multiplex functionality of the Push-To-Talk (PTT)-button and external button, respectively.
During a call the control functions could be activated using a keystroke, for example to
open a door lock. This product is connected with the CT130-CALOG adapter.
The DHSG-adapter CT130-DHSG realizes the transfer and the bidirectional headset control
with DHSG1 headset solutions.
This feature makes it possible to receice calls pushing a button on the headset or on the
telephone or base station.
Examples for comfortable wireless headsets with DHSG standard are products of the
following manufactures: Plantronics, GN Netcom and Sennheiser.
Compatible
wireless
headsets
Business Version (p. 2-3)
Business Plus Version (p. 4-6)
Control Center Version (p. 7-10)
CT130-EHS
CT130-DHSG
CT130-CALOG
Plantronics
CS60 | CS70 | CS351
CS 361 | Savi Office
Plantronics
CS60 | CS70 | CS351
CS361 | Savi Office
Plantronics
CA12CD - modified
(CALOG)
GN Netcom
9120 | 9350 | 9460
6470 | 9470
Sennheiser
BW 900 | DW Office
service- und
dienstleistungszentrum
GmbH leipzig
für kommunikationssysteme
Page 2 of 12
Business Version CT130-EHS
Mode of
Operation,
control and
configuration
Inside the adapter the digital control protocol will be converted from Plantronics (PSB) to
analog input and output parameters.
Using the jumper inside the adapter the cable connection configurations and the call options
will be chosen. The schematic illustration on page 5 shows the jumper configuration at
delivery status.
At the 8-pin RJ45 connection cable the wiring is as follows: IN 1 and OUT 1 (as shown in
the manual Siemens CT130).
With the jumpers 1,2,3 at the jumper region A the cable connection configuration of the
input of the CT130 is arbitrary.
The modulation of the configuration of the output signal from CT130 could be determined by
the jumper pairs 1 and 2 at the jumper region B.
The call trigger from the output, directed to CT130 will be determined witch the jumper
region C. If the Jumper C is not set, an impuls of at least 10 ms is enough to activate the
call automatically. During this continuous call, the impulse will be converted to a call signal
at the headset with an 1.2 sec duration.
Compatible wireless Plantronics headsets
of business version CT130-EHS
CS 60
CS 70
CS 351/361
Savi Office
service- und
GmbH leipzig
Page 3 of 12
Support of two call options:
û
Continous
ringing depending on closing time of raising delay. A call cycles of an 1.2 sec
and a 2 sec break will be generated at the wireless headset.
û
The call initiation will become a ringing 1.2 sec (2 double ringings – delivery status).
Functions
û
Call receiving and call completing at the headset.
û
Call activation at the cradle of the mobil handset.
û
Logic control at the CT130 for the headset status ON/OFF.
CT130-EHS
Siemens
CT130
CT130-EHS
Siemens CT130
on Plantronics Headset systems
PC
USB
X3
PC
RJ 45
USB
Article description: CT130-EHS
Made in Germany
Fon: +49 (0) 341 8684230
www.headsetsysteme.de
X2
PSB
EHS
Manufacture: SDZ-GmbH
RoHS
Control
RJ 10
Low frequency and logic control
e.g.:
Plantronics
CS 60
Schematic board illustration CT130-EHS
wireless Plantronics headsets
in Business Version
CT130-EHS
CT130
1A / 30V DC
PSB
in-house protocol
EHS-Input
A
8
1
4 Meter
1
2
*
C
3
1
1
2
*
*
2
1
x3
8
PSB
converter
*
calloption
3,5 mm
phone jack
call
detector
B
A - Input signal for CT130
B - Output signal from CT130
call signal
at least 10ms
* delivery status
service- und
GmbH leipzig
Page 4 of 12
Business Plus Version CT130-DHSG - bidirectional
Connection and bidirectional control wireless headset systems
1
at DHSG -interface at Siemens USB-Adapter CT130
Siemens USB-Adapter
CT130
CT130
PC
USB
CT130-DHSG
compatible headsets
CT130 - DHSG Adapter
Protocol converter, Siemens CT130 at DHSG
headset interface - bidirectional
X3
PC
RJ 45
USB
X2
Made in Germany
Fon: +49 (0) 341 8684230
RJ 10
logic control
ext. Button
Product
characteristics
The CT130-DHSG-Adapter operates bidirectionally. This feature enables a two-way control between the headset cradle and the phone. A telephone call can be received and terminated on
the headset or on the phone.
The adapter converts the CT130 control-protocol into the DHSG headset protocol. The used
headset technique is not proprietary. Furthermore an optional connection for a external pedal
button for the control of the headset is integrated.
An integrated link plug (bridge one) switches the mode of operation on “send PTT“ when the
jumper is open. This means that the phone is controlled only after a incomming call.
service- und
GmbH leipzig
Page 5 of 12
Technological
functionality
Link: X2 and X3 on CT130
Call for headset cradle, 1:3. The incomming call-signal will be transmitted over X3, pin 5 and
pin 6 (DHSG-protocol) to the headset cradle in real-time.
Calling acceptance by CT130
CT130-Control (output-signal X3, pin 7 and pin 8): ON/OFF. Managed by converter und will
be sended to headset cradle (DHSG). At the same time the control-signal „Answer a
telephone call“ is sended over input CT130, X3, pin 1 and pin 2.
Call signal stop
Open X3, pin 7 and pin 8, signal over X3, pin 1 and pin 2 unlinked by the converter.
Calling acceptance over wireless headset
Answering and termination will be managed by pressing on the headset-button. The headset
cradle DHSG-protocol is converted into the switch-signal to the CT130, link X3
(pin 1 and pin 2). (calling acceptance and hang up).
For system synchronisation the CT130 must be send a response (ON/OFF) to link X3, pin 7
and pin 8 to the CT130 converter. Afterwards the converter sends a DHSG protocoll
command to the headset cradle.
The trigger criterion (active ON) on X3 (pin 7 and pin 8) must be present as long as the
signal exists on pin 1 and pin 2.
External pedal button
Function calling acceptance using external button:
call-signal on link X3, pin 5 and pin 6 switching by call-frequency → causing DHSGû
signal on headset cradle
external button is pressed → DHSG-Code is sended to the cradle → link on X3, pin 2
û
and pin 2 will be closed → call answering
feedback signal → active on link X3, pin 7 and pin 8 will await for the confirmation →
û
code will be sended to cradle for synchronisation.
service- und
GmbH leipzig
Page 6 of 12
Functions
special
Function Call by ext. button
û
Ext. button is pressed → converter opens link X3, pin 1 and pin 2.
û
Link CT130 (active criterion) X3, pin 7 and pin 8, open.
û
The converter sends OFF-Code to headset cradle.
û
Wireless headset OFF (stand by).
All operations are free in order and can be combined.
Connector pin assignment
CT130
X3
8
CT130-DHSG controller
CS60
APS1
VK 2026
1
8
output call answer/complete
output 2
Mi
output 1
Rec
150 ohm
Rec
input optocoupler call
Mi
input 1
input optocoupler active criterion
8
1
DHSG
to PSB
1
X2
Mi
LED
operating mode
Rec
Rec
Mi
VK 2002
Link closed:
only phone
Link opened:
phone + wireless-PTT
function (Push-to-Talk)
~
power supply
9V AC
~
external pedal button
(3,5 mm phone jack)
service- und
GmbH leipzig
Page 7 of 12
Control Center Version CT130-CALOG
Siemens USB-Adapter
CT130
CT130
CA12CD
or with logic control (CALOG)
CT130-CALOG
LF-Working station switch - Siemens CT130
at Plantronics headset
PC
USB
X3
PC
Article description: CT130-CALOG
RJ 45
USB
PTT Button
LF Signal
Logic control
Manufactor: SDZ-GmbH
X2
Made in Germany
Tel.-Hotline: +49 (0) 341 8684230
RoHS
RJ 10
low frequency
logic control with CALOG
ext. pedal button
Product
characteristics
active
signal
call
special
functions
e.g.: door lock
The adapter CT130-CALOG was optimized for the control center application and offers besides the input of professional wireless headsets plantronics CA12CD with push-to-talk (PTT)
button although an extended functionality as compared to the adapter version CT130-EHS.
Through the connection of an external button (pedal) at the EHS adapter, with the same performance as the PTT button at the headsets, an efficient remote control of the phone/USB and the
wireless headset solution is possible.
Apart from the call answer and termination exists a special highlight in the multiplex functionality of the PTT button and the external button, respectively. During a call, the control functions
could be activated using a keystroke, for example to open a door lock.
(Capabilities: barrier site, emergency call, attack report, process control, recording,
door lock)
Is the modified headset solution CA12CD, called „CALOG“, in operation, the feature: automatically logic control/ headset ON after the removal of the mobile headset from the
recharger, could be used.
service- und
GmbH leipzig
Page 8 of 12
The application of the modified headset solution CA12CD, called CALOG,
combines following advantages:
Uncomplicated
û
non-stop operation.
Fast cut connector for personalized headsets (each employee has its own) automatic headû
set detection and switch over in headset service after removal from recharger of the base
station (necessary for control center logic switch).
Microphone and receiver analysis, criterium for logic control.
û
Masking of calls in headset.
û
Control of “door lock function” during a call using the push-to-talk button at the mobil handû
set or the external button.
Special push button at the mobile headset in halt and non-halt functionality for specific
û
applications.
Low radiation system - health neutral.
û
Wireless disconnection using a button on mobile headset (Stand by).
û
High capacity battery in stand by.
û
Functions
Call answer
û
and termination at the mobile headset (PTT button).
Call ringing masking to hearing level.
û
Logic control on CT130, headset service ON for control center implementation.
û
External pedal button for call answer and completing.
û
Two way control for active analysis and control of external applications like ELA, speaker, acû
tive notification.
Two way contact for call analysis and control of external application, like central notificaû
tions, signaling device.
Two way contact activated by keystroke for the control of external applications, like door
û
lock, barrier site, alarm, call, attack report.
Prevention of call waiting during an open connection (ON).
û
service- und
GmbH leipzig
Page 9 of 12
Extended functions CT130-CALOG with modified CA12CD (CALOG)
û
It is communicated to the CT130 and to the logic control, if the mobile headset is
loaded to the base station and the automatic headset service is shifted to the hand
receiver.
Short and long keystroke
û
The multiplex
functionality is activated by pushing the PTT button at the mobile headset or the external button under 0.5 seconds for call control and by pushing over 1 second, the special application, like the door lock will be activated. The switching operation is defined by 1.8 seconds.
A blocked button will be ignored after first analysis.
û
Insert optional
û
To simplify
the installation of the systems a insert is offered. It is delivered together
with the adapter and 3x 20cm fast connecting wire. In the insert the relay outputs for
external control systems could be switched on by spring clips.
service- und
GmbH leipzig
Page 10 of 12
With the adapter the input and output signals are adjusted to the combined system solution.
The received call signal from the CT130 causes a powerfree masking of the ringing into the
hearing level of the mobile headset.
The definition of the mode of operation, if the call is connected over short term impulse or in
real time, will be determined by the jumper region B in the adapter. In delivery status the
jumper B is set and a call impulse is enough and an own signal cycle will be generated.
The PTT button at the mobile headset and the external button to the remote control of the
CT130 as well as the bidirectional mode of operation with the switch function active ON of
the CT130 and the door lock function through the keystroke are confirmed by a tone in the
headset. In delivery status the jumper C in the adapter is set and the conformation tone is
switched on.
On the left hand site of the shell the 3.5 mm phone jacks are situated for external hook ups
and three output sockets, each with relay switch. The power is supplied from the headset
technique.
Schematic board illustration
CT130-CALOG
CT130
0,3A / 30V DC
1
1
A - input signal for CT130
B - output signal from CT130
C-
B
A
8
*
Mode of
operation,
set up and
configuration
*
2
C
*
CA12CD
or
CALOG
(with logic control)
3
6
Microcontroller
calloption
call
call
detector
optoc.
1 x3
4 Meter
8
1
active
Mi
Hö
call ringing
in headset
Mi
x2
PTT
button
optoc.
call signal
at least 10ms
optoc.
0,5A 30V DC
* delivery status
phone jack
3,5 mm
ext. pedal
button
actice
signal
call
special
functions
e.g.: door lock
service- und
GmbH leipzig
Page 11 of 12
Wiring
diagramm
Business Version CT130-EHS
Plantronics
Siemens
CT130
LF-Working station switch - Siemens CT130
X3
8
RJ 45
1
PC
USB
Input/Output
Software controlled
at Plantronics headset
PSB
1
Article description: CT130-EHS
8
CS 60
Made in Germany
Fon: +49 (0) 341 8684230
CS 70
RoHS
X2
RJ 10
logic control
headset service ON/OFF
NF (Tonsignale)
CS 351/361
Savi Office
Business Plus Version CT130-DHSG
Siemens USB-Adapter
CT130
CT130
PC
USB
CT130-DHSG
compatible headsets
CT130 - DHSG Adapter
Protocol converter, Siemens CT130 at DHSG
headset interface - bidirectional
X3
PC
RJ 45
USB
X2
Made in Germany
Fon: +49 (0) 341 8684230
RJ 10
logic control
ext. Button
service- und
GmbH leipzig
Page 12 of 12
Wiring
diagramm
Control center version CT130-CALOG
Plantronics
NT12V
230V/AC
Siemens
CT130
PC
X3
8
RJ 45
1
input/output
logic control
1
LF-Working station switch Siemens CT130 at Plantronics CA12CD
8
6
Article description: CT130-CALOG
USB
4
6
Made in Germany
Fon: +49 (0) 341 8684230
RoHS
X2
CALOG (CA12CD modified)
RJ 10
Push-to-Talk-Button
LF +
logic control
logic control
headset service ON/OFF
Splitter
Active
Call
special
functions
e.g.: door lock
Functions
û
call answer
û
call termination
û
door lock function during call with keystroke
optional
ext. pedal button
CT130-EHS Adapter
Item-no.: 14011001
Dimensions
(HxWxD in mm):
Ports:
Power supply:
CT130-CALOG Adapter
Item-no.: 14011002
40x70x20
RJ 45 - CT130-X3
3,5 mm phone jack
at PSB
PSB headset station
Dimensions
(HxWxD in mm):
Ports:
Power supply:
115x65x26
RJ 45 - CT130 - X3
RJ 10 - LF-CT130 - X2
3,5 mm phone jack for
ext. button
RJ 12 - CALOG
over CA12CD
CT130-DHSG Adapter
Item-no.: 01031001 | 01031002
Dimensions
(HxWxD in mm):
Ports:
46x81x18,5
RJ 45 - CT130-X3
SDZ-CT130-eng-6.2010-01
Techn.
parameters
Item-no.: 01031002
incl. DHSG-Adapter Plantronics
1
DHSG - Drahtlose Hör- und Sprechgarnitur
service- und
GmbH leipzig
Schönbachstraße 65a
04299 Leipzig
http://www.headsetsysteme.de E-Mail: info@modicom.de
Fon:
Fax:
+49 (0)341 86 84 2-30
+49 (0)341 86 84 2-33

CT130-EHS | CT130-DHSG | CT130

Transcription

Similar documents

PDF-Dokument - Headsetsysteme

Datenblatt - Headsetsysteme

Datenblatt - Headsetsysteme

SKS 200 AZ Serie - Produktinfo

Zum Glück zu Hause

AAZ 700 - Headsetsysteme

JK125P, JK300P and JK300HP

The Duke Energy Indiana 2011 Integrated Resource Plan