MLM MedialLink_206_revF.PMD
Transcription
MLM MedialLink_206_revF.PMD
im Vertrieb von CAMBOARD Electronics MediaLink™ Mounting Options Installation Guide This guide details how to install the following Extron MediaLinkTM Mounting Options faceplates, designed for use with an MLC 206 controller. • MLM 206 LAAP, a 3.15" H x 10.00" W (8.0 cm H x 25.4 cm W) lectern/ furniture-mounting faceplate with four single-space AAP openings: #60-389-02 (black), #60-389-03 (white), 60-389-05 (RAL9010 off-white) DISPLAY POWER VOLUME MAX MIN Extron MediaLink MLM 206 LAAP This faceplate replaces the MLM-LAAP. • MLM 206 7GWP, a seven-gang (4.50" H x 13.57" W [11.43 cm H x 34.46 cm W]) faceplate with eight single-space AAP openings. This plate can be mounted to a mud ring, an Extron Surface Mount Box (#60-645-02 or -05), an Extron External Wall Box (#60-689-02, -03, -05), or a standard electrical box: #70-373-02 (black), #70-373-03 (white), #70-373-05 (RAL9010 off-white) DISPLAY POWER VOLUME MAX MIN Extron MediaLink MLM 206 7GWP Controllers and AAPs are not included with any of the faceplates. Replacing the MLC 206 Faceplate with an MLM Faceplate 1. Use a small Phillips screwdriver to remove the four faceplate attachment screws marked 1 in the picture below, and save them for later use. 1 1 DISPLAY POWER VCR DVD Laptop VOLUME MAX MIN 1 1 Extron MLC 206 Do not remove these screws while the MLC 206 is installed in a wall or furniture, or the controller may fall down into the wall/furniture or wall box. 68-621-01 Rev. F 01 05 www.camboard.de Tel.MediaLink 07131 911201 ce-info@camboard.de ™ Mounting Options • Installation Guide 1 Fax 07131 911203 im Vertrieb von CAMBOARD Electronics MediaLink™ Mounting Options Installation Guide, cont’d 2. Lift the faceplate off the MLC 206. Plastic Window Faceplate AY PL R DISWE PO ink Me L dia E M LU VO X MA MIN Ex tro n Remove four screws. 3. Align the openings in the new MLM faceplate with the controller’s buttons, knob, and LEDs, and place the new faceplate on the MLC, as shown above. 4. Replace the four screws removed in step one, and hand tighten them. 5. Install the MLC 206 MediaLink controller in a wall or furniture as appropriate. If necessary, use one of the cutout templates in this guide to create an opening in the installation surface of a lectern or other furniture. Templates Use the appropriate template on the next 2 pages as a guide to measure and mark the hole in the wall or furniture for installing the faceplate with an MLC 206. The templates are not to scale and are provided for reference only. The controller requires a depth of at least 1.5" (3.8 cm) inside the wall or furniture. www.camboard.de 07131Guide 911201 2 MediaLink™ Mounting OptionsTel. • Installation Fax 07131 911203 ce-info@camboard.de im Vertrieb von CAMBOARD Electronics 3.15" (8.0 cm) 2.9" (7.4 cm) 8.9" (22.6 cm) Top Panel 10" (25.4 cm) SURFACE CUT-OUT AREA FOR FURNITURE MOUNT Location of MLC 226 To install MLC 206 and MLM 206 LAAP directly into furniture, cut along this line. .250" (1.00 cm) .295" (1.16 cm) TEMPLATE IS NOT FULL SIZE. Cut-Out Template for Extron's MLM 206 LAAP www.camboard.de Tel.MediaLink 07131 911201 ce-info@camboard.de ™ Mounting Options • Installation Guide 3 Fax 07131 911203 im Vertrieb von CAMBOARD Electronics MLM 206 7GWP 4.5" (11.4 cm) 2.9" (7.4 cm) Top Panel 13.57" (34.46 cm) Location of MLC 206 12.9" (32.77 cm) SURFACE CUT-OUT AREA FOR FURNITURE MOUNT To install MLC 206 and MLM 206 7GWP directly into furniture, cut along this line. TEMPLATE IS NOT FULL SIZE. Cut-Out Template for Extron's MLM 206 7GWP www.extron.com Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.4664 Kyodo Building 16 Ichibancho Chiyoda-ku, Tokyo 102-0082 Japan +81.3.3511.7655 Fax +81.3.3511.7656 www.camboard.de 4 Tel. 07131 911201 Fax 07131 911203 © 2005 Extron Electronics. All rights reserved. ce-info@camboard.de