Scientific Publications

Scientific Publications
1.7.2011
1.
H. Riedel, Eine Beschreibung des Sinterns und Heißpressens mit Hilfe der PorengrößenVerteilungsfunktion, DKG-Jahrestagung, Deutsche Keramische Gesellschaft, Köln (1989)
14-17.
2.
H. Riedel, A Constitutive Model for the Finite-Element Simulation of Sintering - Distortions
and Stresses, in: Ceramic Powder Science III, G.L. Messing, S.I. Hirano, H. Hausner (eds.),
American Ceramic Society, Westerville, OH (1990) 619-630.
3.
J. Svoboda, H. Riedel, Pore-Boundary Interactions and Evolution Equations for the Porosity
and the Grain Size during Sintering, Acta metall. mater. 40 (1992) 2829-2840.
4.
H. Riedel, D.-Z. Sun, Simulation of Die Pressing and Sintering of Powder Metals, Hard Metals and Ceramics, in: Numerical Methods in Industrial Forming Processes, Numiform 92,
J.L. Chenot, R. D. Wood, O.C. Zienkiewicz (eds.), A.A. Balkema, Rotterdam (1992) 883886.
5.
H. Riedel, J. Svoboda, A Theoretical Study of Grain Growth in Porous Solids During Sintering, Acta metall. mater. 41 (1993) 1929-1936.
6.
H. Riedel, J. Svoboda, H. Zipse, D. Meyer, Numerische Simulation des Pressens und Sinterns von Bauteilen, DGM-Fortbildungsseminar Pulvermetallurgie, DGM Informationsgesellschaft-Verlag, Oberursel (1993) 1-12.
7.
H. Riedel, H. Zipse, R. Gaebel, J. Svoboda, Constitutive Equations for the Mechanical Behaviour of Powder Compacts during Sintering, in: Materials by Powder Technology PTM'93, F. Aldinger (ed.), DGM Informationsgesellschaft-Verlag, Oberursel (1993) 923928.
8.
H. Riedel, D. Meyer, J. Svoboda, H. Zipse, Numerical Simulation of Die Pressing and Sintering - Development of Constitutive Equations, Int. J. Refractory Metals & Hard Materials 12
(1993-94) 55-60.
9.
J. Svoboda, H. Riedel, H. Zipse, Equilibrium Pore Surfaces, Sintering Stresses and Constitutive Equations for the Intermediate and Late Stages of Sintering - Part I: Computation of
Equilibrium Surfaces, Acta metall. mater. 42 (1994) 435-443.
10.
H. Riedel, H. Zipse, J. Svoboda, Equilibrium Pore Surfaces, Sintering Stresses and Constitutive Equations for the Intermediate and Late Stages of Sintering - Part II: Diffusional Densification and Creep, Acta metall. mater. 42 (1994) 445-452.
11.
H. Riedel, V. Kozák, J. Svoboda, Densification and Creep in the Final Stage of Sintering,
Acta metall. mater. 42 (1994) 3093-3103.
12.
H. Riedel, J. Svoboda, H. Zipse, Numerical Simulation of Die Pressing and Sintering - Development of Constitutive Equations, in: Powder Metallurgy World Congress PM 94, D. Francois (ed.), Les Editions de Physique Les Ulis, Paris (1994) 663-671.
13.
J. Svoboda, H. Riedel, New Solutions Describing the Formation of Interparticle Necks in
Solid-State Sintering, Acta metall. mater. 43 (1995) 1-10.
14.
J. Svoboda, H. Riedel, Quasi-Equilibrium Sintering for Coupled Grain Boundary and Surface Diffusion, Acta metall. mater. 43 (1995) 499-506.
15.
H. Zipse, H. Riedel, The Mechanical Behavior of Sintering Powder Compacts, in: Ceramic
Transactions, Vol. 51, Processing and Technology, H. Hausner, G.L. Messing, S.-I. Hirano
(eds.), American Ceramic Society, Westerville, OH (1995) 489-493.
1
16.
H. Riedel, H. Zipse, M. Hennies, D. Meyer, Der Einfluß von Inhomogenitäten auf Verzug,
Rißbildung and Eigenspannungen beim Sintern keramischer Werkstoffe, in: Hochleistungskeramiken - Herstellung, Aufbau, Eigenschaften, G. Petzow, J. Tobolski, R. Telle (eds.),
VCH-Verlag, Weinheim (1995) 241-253.
17.
D.-Z. Sun, H. Riedel, Prediction of Shape Distortions of Hard Metal Parts by Numerical Simulation of Pressing and Sintering, in: Simulation of Materials Processing: Theory, Methods and Applications, Numiform 95, S.-F. Shen, P.R. Dawson (eds.), Balkema, Rotterdam
(1995) 881-886.
18.
R. Gaebel, H. Riedel, Mechanical Behaviour of Al2O3/MgO Doped Silicon Nitride During
Liquid Phase Sintering, in: Fourth Euro Ceramics, Vol. 2, C. Galassi (ed.), Gruppo Editoriale
Faenza Editrice (1995) 133-140.
19.
J. Svoboda, H. Riedel, R. Gaebel, A Model for Liquid Phase Sintering, Acta metall. mater.
44 (1996) 3215-3226.
20.
H. Riedel, O. Coube, R. Gaebel, P.E. McHugh, D.-Z. Sun, J. Svoboda, »Formgenaue und
rißfreie Teile aus Hartmetall, Keramik und Sintermetall durch rechnerisch optimiertes Pressen und Sintern«, in: Pulvermetallurgie in Wissenschaft und Praxis, Band 12, Fertigungsoptimierung, R. Ruthardt (ed.), DGM Informationsgesellschaft Verlag, Frankfurt (1996) 95106.
21.
H. Riedel, Pressing and Sintering in Powder Technology, in: COST 512, Proceedings of the
General Workshop on Modelling in Materials Science and Processing, M. Rappaz, M.
Kedro (eds.), European Commission, Brussels (1996) 146-157.
22.
H. Riedel, O. Coube, R. Gaebel, D.-Z. Sun, Numerische Simulation des Pressens und Sinterns in der Pulvertechnologie, in: Werkstoffwoche `96, Band 8, Simulation, Modellierung,
Informationssysteme, J. Hirsch (ed.), DGM Informationsgesellschaft-Verlag, Frankfurt
(1997) 217-224.
23.
P.E. McHugh, H. Riedel, A Liquid Phase Sintering Model - Application to Si3N4 and WCCo, Acta mater. 45 (1997) 2995-3003.
24.
D.Z. Sun, H. Riedel, R. Gaebel, E. Parteder, Thermisch-mechanisch gekoppelte Simulation
des Sinterprozesses mit einem User-Materialmodell, Beiträge zum DeutschÖsterreichischen ABAQUS-Anwendertreffen, Universität Innsbruck (1997) 99-109.
25.
H. Riedel, Berechnungs- und Simulationsmodelle für die Nutzung von Werkstoffen, Werkstoffe in der Fertigung 4 (1997) 41-44.
26.
H. Riedel, Pressing and Sintering in Powder Technology, in: Plansee Proceedings, vol. 4, G.
Kneringer, P. Rödhammer, P. Wilhartitz (eds.), Plansee AG, Reutte, Austria (1997) 233244.
27.
H. Zipse, Finite-Element Simulation of the Die Pressing and Sintering of a Ceramic Component, J. Euro. Ceramics Soc. 17 (1997) 1707-1713.
28.
H.E. Exner, T. Kraft, Review on Computer Simulations of Sintering Processes, in: Powder
Metallurgy World Congress 1998, Vol. 2, EPMA, Shrewsbury, U.K. (1998) 278-283.
29.
R. Westerheide, H. Zipse, T. Hollstein, Finite Element Simulation of Die Pressing and Sintering Results in Time and Cost Savings, cfi/Ber. DKG 75 No. 4 (1998) 31-34.
30.
H. Riedel, T. Kraft, Distortions and Cracking of Graded Components During Sintering, in:
Functionally Graded Materials 1998, W.A. Kaysser (ed.), Materials Science Forum Vols.
308-311, Trans Tech Pub., Zürich, Switzerland (1999) 1035-1040.
2
31.
H. Riedel, T. Kraft, P. Stingl, J. Greim, Formgenaue, rissfreie und kostengünstige Bauteile
aus Keramik – Numerische Simulation des Pressens und Sinterns, in: Werkstoffwoche ’98,
Band VII, J. Heinrich, G. Ziegler, W. Hermel, H. Riedel (eds.), Wiley-VCH, Weinheim, New
York (1999) 767-772.
32.
O. Coube, H. Riedel, D. Fax, E. Ernst, W. Kynast, Modellierung von Verdichtung und Rissbildung beim Trockenpressen von Metallpulvern, in: Werkstoffwoche ’98, Band VI, R.
Kopp, P. Beiss, K. Herfurth, D. Böhme, R. Bormann, E. Arzt, H. Riedel (eds.), Wiley-VCH,
Weinheim, New York (1999) 849-854.
33.
A.F. Plankensteiner, E. Parteder, H. Riedel, D.-Z. Sun, Micromechanism Based Macrostructural Finite Element Analysis of the Sintering Behavior of Refractory Metal Parts Using
ABAQUS, ABAQUS User World Congress, Chester (1999) 643-657.
34.
E. Parteder, H. Riedel, R. Kopp, Densification of sintered molybdenum during hot upsetting: experiments and modelling, Mater. Sci. Eng. A 264 (1999) 17-25.
35.
T. Kraft, H. Riedel, P. Stingl, F. Wittig, Numerische Simulation des Pressens und Sinterns
einer Dichtscheibe aus Al2O3, wt Werkstattstechnik 89 (1999) 338.
36.
T. Kraft, H. Riedel, P. Stingl, F. Wittig, Finite Element Simulation of Die Pressing and Sintering, Adv. Eng. Mater. 1 (1999) 107-109.
37.
T. Kraft, H. Riedel, P. Stingl, F. Wittig, Numerische Simulation des Pressens und Sinterns,
in: Handbuch Technische Keramische Werkstoffe, J. Kriegesmann (ed.), Fachverlag Deutscher Wirtschaftsdienst, Köln, Kap. 3.4.3.2 (1999) 1-17.
38.
D. Meyer, T. Kraft, Entwicklung and Optimierung von Preßwerkzeugen durch Computersimulation, in: Pulvermetallurgische Formgebung im Wandel, Pulvermetallurgie in Wissenschaft und Praxis, Vol. 15, H. Kolaska (ed.), VDI-Gesellschaft Werkstofftechnik, Düsseldorf,
Germany (1999) 273-274.
39.
PM Modnet Computer Modelling Group (L. Federzoni, H. Riedel, O. Coube, M. Oldenburg, H.A. Häggblad, D.T. Gethin, P. Mosbah, J. Virta, H. Martikainen, A. Frachon, P. Doremus, D. Imbault), Comparison of computer models representing powder compaction
process, Powder Metall. 42 (1999) 301-311.
40.
T. Kraft, H. Riedel, O. Rosenfelder, P. Stingl, Computational Optimization of Parts Produced from Ceramic Powders, in: Microstructures, Mechanical Properties and Processes, Y.
Bréchet (ed.), EUROMAT 1999, Vol. 3, Wiley-VCH, Weinheim, Germany (2000) 337-342.
41.
O. Coube, H. Riedel, Numerical Simulation of Metal Powder Die Compaction with Special
Consideration of Cracking, Powder Metallurgy 43 (2000) 123-131.
42.
T. Moritz, H. Riedel, G. Werner, G. Tomandl, Modeling and the Investigation of Pore Size
Graded Titania Layers during Sintering, J. Mater. Sci. 35 (2000) 2235-2240.
43.
T. Kraft, O. Coube, H. Riedel, Finite Element Simulation of Die Pressing and Sintering, in:
Advanced Ceramics and Composites, R. Gadow (ed.), Expert-Verlag, RenningenMalmsheim (2000) 130-136.
44.
O. Coube, H. Riedel, T. Kraft, Better Density Homogeneity and Reduced Warpage by Numerical Simulation of Die Pressing and Sintering, Powder Metallurgy World Congress
2000, Vol. 1, K. Kosuge, H. Nagai (ed.), Japan Society of Powder and Powder Metallurgy
(2000) 636-638.
45.
P. Brewin, P. Doremus, D.T. Gethin, P. Skoglund, J.H. Tweed, P. Mosbah, O. Coube, Modelling of Powder Die Compaction; Review of EU Thematic Network, Powder Metallurgy
World Congress 2000, Vol. 1, K. Kosuge, H. Nagai (ed.), Japan Society of Powder and
Powder Metallurgy (2000) 58-61. (fehlt)
3
46.
H. Riedel, B. Blug, A Comprehensive Model for Solid State Sintering and Its Application to
Silicon-Carbide, in: Multiscale Deformation and Fracture in Materials and Structures: The
J.R. Rice 60th Anniversary Volume, Solid Mechanics and Its Application - Vol. 84, T.J.
Chuang, J.W. Rudnicki (eds.), Kluwer Academic Publishers, Dordrecht (2001) 49-70.
47.
E. Parteder, F. Andrieux, H. Riedel, D.-Z. Sun, »Simulation of Hot Forming Processes of
Refractory Metals Using Porous Metal Plasticity Models«, in: Simulation of Materials Processing: Theory, Methods and Applications, NUMIFORM 2001, K. Mori (ed.), Swets & Zeltlinger, Lisse, 2001, pp.1047-1052.
48.
T. Kraft, O. Coube, H. Riedel, Numerical Simulation of Pressing and Sintering in the Ceramic and Hard Metal Industry, in: Recent Developments in Computer Modelling of Powder
Metallurgy Processes, NATO Advanced Research Workshop, Series III: Computer and Systems Science – Vol. 176, A. Zavaliangos, A. Laptev (eds.), IOS Press, Amsterdam, Netherlands (2001) 181-190.
49.
T. Kraft, H. Riedel, O. Rosenfelder, F. Wittig, Stresses in the Tools and Density Evolution in
a Powder Compact during Uniaxial Die Compaction, Materials Week 2000, Werkstoffwoche-Partnerschaft GbR, Frankfurt (2001) (only on WWW) http://www.materialsweek.org/
or
http://www.iwm.fhg.de/arbeitsgebiet/lb/thema_lb41/materweek00.pdf .
50.
T. Kraft, H. Riedel, O. Rosenfelder, Belastungen der Werkzeuge beim Pulverpressen, in:
Handbuch Technische Keramische Werkstoffe, J. Kriegesmann (ed.), Fachverlag Deutscher
Wirtschaftsdienst, Köln, Kapitel 3.4.3.3 (2001) 1-18.
51.
T. Kraft, O. Coube, H. Riedel, Numerische Simulation des Pressens und Sintern mit
ABAQUS, 13. deutschsprachiges ABAQUS Anwendertreffen, M. Küssner (ed.), ABACOM
Software GmbH, Aachen, Germany (2001) (19 Seiten ohne Seitenzahlen).
52.
T. Kraft, M. Reiterer, Compaction Modeling: Mesh Generation and its Influence on Simulation Results, European Congress on Powder Metallurgy 2001, Vol. 3, EPMA, Shrewsbury,
U.K. (2001) 240-245.
53.
G. Rottmann, O. Coube, H. Riedel, Comparison Between Triaxial Results and Models Prediction with Special Consideration of the Anisotropy, European Congress on Powder Metallurgy 2001, Vol. 3, EPMA, Shrewsbury, U.K. (2001) 29-37.
54.
O. Coube, Dienet Thematic Network: Computer Simulation Development, European Congress on Powder Metallurgy 2001, Vol. 3, EPMA, Shrewsbury, U.K. (2001) 38-41.
55.
P. Brewin, A. Cocks, O. Coube, P. Dorémus, L. Federzoni, R. Maassen, J. Tweed, W. Wandermeulen, Dienet Thematic Network: Development of Input Data, European Congress on
Powder Metallurgy 2001, Vol. 3, EPMA, Shrewsbury, U.K. (2001) 12-13.
56.
P. Brewin, P. Dorémus, G.T. Gethin, P. Skoglund, J.H. Tweed, H. Wiedemann, O. Coube et
al., Case Study Integrating Materials Characterisation, Modelling and Validation for a Ferrous Multilevel Component, European Congress on Powder Metallurgy 2001, Vol. 3,
EPMA, Shrewsbury, U.K. (2001) 2-9.
57.
P. Brewin, O. Coube, P. Dorémus, L. Federzoni, D. Gethin, W. Markeli, J. Tweed, EU Thematic Network: ‘DIENET’ Modelling of Powder Die Compaction, European Congress & Exhibition on Powder Metallurgy 2001, Vol. 3, EPMA, Shrewsbury, U.K. (2001) 246-254.
58.
T. Kraft, H. Riedel, Density Evolution in a Powder Compact and Stresses in the Tools during
Uniaxial Die Compaction, Grünkörpercharakterisierung, 8. Keramik-Tag der BAM, T. Rabe
(ed.), Fortschrittsberichte DKG, Vol. 16, No. 2, Deutsche Keramische Gesellschaft, Köln,
Germany (2001) 76-83.
4
59.
E. Parteder, H. Riedel, D.-Z. Sun, Simulation of Hot Forming Processes Using Porous Metal
Plasticity Models, in: Proceedings of the 15th International Plansee Seminar, G. Kneringer,
P. Rödhammer, H. Wildner (eds.), Plansee Holding AG, Reutte, Austria (2001) 60-73.
60.
M. Reiterer, T. Kraft, R. Kauermann, H. Riedel, Modelling of the Sinter Forging Process of
Reaction Bonded Alumina, Materials Week 2001, Werkstoffwoche-Partnerschaft GbR,
Frankfurt (2001) (only on CD) http://www.materialsweek.org/.
61.
T. Kraft, H. Riedel, F. Raether, F. Becker, Simulation des Brennprozesses bei der Herstellung
von Gebrauchskeramiken, Keramische Zeitschrift 54 (2002) 374-381.
62.
O. Coube, P. Brewin, Modelling and Numerical Simulation of Powder Compaction, Powder Metall. 45 (2002) 18-19.
63.
A.F. Plankensteiner, T. Kraft, H. Riedel, Micromechanism Based Macrostructural Finite Element Analysis of the Powder Metallurgical Process Route of Refractory Metals, 5. World
Congress on Computational Mechanics (WCCM V), H.A. Mang, F.G. Rammerstorfer, J.
Eberhardsteiner (eds.), Vienna University of Technology, Austria (2002) (only on WWW)
http://wccm.tuwien.ac.at.
64.
T. Kraft, H. Riedel, Numerical Simulation of Die Compaction and Sintering, Powder Metall.
45 (2002) 227-231.
65.
T. Kraft, H. Riedel, Computational Shape Optimization of a Cutting Tool, European Conference on Hard Materials and Diamond Tooling, Vol. 1: Hard Materials, EPMA, Shrewsbury,
U.K. (2002) 143-147.
66.
H. Riedel, T. Kraft, Tool Design Based on Numerical Sumulation of Compaction and Sintering, Process Modelling in Powder Metallurgy & Particulate Materials, A. Lawley, J.E. Smugeresky, L. Smith (eds.), MPIF, Princeton, NJ (2002) 161-165.
67.
M. Reiterer, T. Kraft, H. Riedel, Identification of Process Parameters for Sinter Forming of
RBAO by Using Numerical Simulations, 2nd Int. Conf. on Shaping of Advanced Ceramics,
J. Luyten, J.P. Erauw (eds.), Flemish Institute for Technological Research (Vito), Mol, Belgium (2002) 207-212.
68.
O. Coube, H. Riedel, Modeling of Metal Powder Behavior under Low and High Pressure,
Advances in Powder Metallurgy & Particulate 2002, Part 9, V. Arnhold, C.-L. Chu, W.F.
Jandeska, Jr., H.I. Sanderow (eds.), Metal Powder Industries Federation, Princeton, NJ
(2002) 199-208.
69.
PM Modnet Computer Modelling Group (J. H. Tweed, L. Federzoni, W. Rau, O. Coube, P.
Skoglund, A. Cocks, M. Oldenburg, H.A. Häggblad, H. Wiedemann, D.T. Gethin, J. Virta,
H. Martikainen, A. Frachon, P. Doremus, D. Imbault), Numerical Simulation of Powder
Compaction for Two Multilevel Ferrous Parts, Including Powder Characterisation and Experimental Validation, Powder Metall. 45 (2002) 335-344.
70.
T. Kraft, H. Riedel, O. Rosenfelder, Compaction and Sintering of a Ceramic Seal: Modeling
and Experimental Response, Int. J. Powder Metall. 39 (6) (2003) 27-34.
71.
T. Kraft, Optimising Press Tool Shapes by Numerical Simulation of Compaction and Sintering – Application to a Hard Metal Cutting Insert, Modelling Simul. Mater. Sci. Eng. 11
(2003) 381-400.
72.
T. Kraft, H. Riedel, Numerical Simulation of the Fatigue Lifetime of a Powder Metallurgical
Gear Based on the Green Density Distribution, International Conference on Processing &
Manufacturing of Advanced Materials, THERMEC’ 2003, T. Chandra, J.M. Torralba, T. Sakai (eds.), Mater. Sci. Forum, Vol. 426-432, Trans Tech Publications, Zürich, Switzerland
(2003) 4221-4226.
5
73.
B. Kieback, A. Neubrand, H. Riedel, Processing techniques for functionally graded materials, Mater. Sci. Eng. A 362 (2003) 81-105.
74.
T. Kraft, Optimale pulvertechnologische Bauteile durch Simulation, Konstruktion (10)
(2003) IW7-IW8.
75.
T. Kraft, H. Riedel, Prediction of Fatigue Lifetime of PM-Parts, Advances in Powder Metallurgy & Particulate Materials - 2003, Part 4, R. Lawcock, M. Wright (eds.), MPIF, Princeton,
NJ (2003) 130-141.
76.
T. Kraft, Determination of the Optimum Tool Geometry of a Cutting Insert by Finite Element Simulation of Compaction and Sintering, Advances in Powder Metallurgy & Particulate Materials - 2003, Part 4, R. Lawcock, M. Wright (eds.), MPIF, Princeton, NJ (2003)
120-129.
77.
A. F. Plankensteiner, D. Duschlbauer, O. Coube, H. Pettermann, H. Riedel, Numerical and
Experimental Analysis of Pore Shape Evolution of Sintered Molybdenum under Triaxial Loading Conditions, Advances in Powder Metallurgy & Particulate Materials - 2003, Part 4, R.
Lawcock, M. Wright (eds.), MPIF, Princeton, NJ (2003) 108-119.
78.
O. Coube, A.C.F. Cocks, C.Y. Wu, Study of Powder Transfer and its Influence on the
Green Density Distribution, Advances in Powder Metallurgy & Particulate Materials - 2003,
Part 4, R. Lawcock, M. Wright (eds.), MPIF, Princeton, NJ (2003) 51-65.
79.
O. Coube, R. Maric, A Comparative Study between Micro- and Nano-Doped Ceria Powders for the Fabrication of Solid Oxide Fuel Cell Electrolyte, Int. Conf. Nanotechnology &
PM² 2003, MPIF, Princeton, NJ (2003) 96-102.
80.
O. Coube, L. Federzoni, J. Cante, M. Oldenburg, Y. Chen, D. Imbault, P. Dorémus, J.
Tweed, A. Leuprecht, W. Markeli, P. Brewin, A Complete Study of the Die Compaction of
a Flanged Bushing – From the Powder Characterisation to the Validation of the Numerical
Simulation, European Congress on Powder Metallurgy 2003, Vol. 3, EPMA, Shrewsbury,
U.K. (2003) 71-76.
81.
O. Coube, H. Riedel, W. Barth, A. Flaig, H. P. Koch, Numerical Simulation of the Double
Step Pressing of a Crown Gear, European Congress on Powder Metallurgy 2003, Vol. 3,
EPMA, Shrewsbury, U.K. (2003) 43-49.
82.
O. Coube, A. C. F. Cocks, C-Y Wu, Influence of Die Filling and Powder Transfer on the
Density Distribution after Compaction, European Congress on Powder Metallurgy 2003,
Vol. 3, EPMA, Shrewsbury, U.K. (2003) 231-237.
83.
J. Tweed, W. Markeli, A. Leuprecht, J-F. Lartigue, A.C.F. Cocks, L.S. Schneider, D.M.M.
Guyoncourt, O. Coube, P. Brewin, Production and Characterisation of a Hardmetal Bushing for a Compaction Modelling Study, European Congress on Powder Metallurgy 2003,
Vol. 3, EPMA, Shrewsbury, U.K. (2003) 57-63.
84.
R. Maric, O. Coube, S. Sundell, Low Temperature Sintering of Dense Nanocrystalline Cerium and Cerium Doped Oxide Ceramics, Int. Conf. Nanotechnology & PM² 2003, MPIF,
Princeton, NJ (2003) 96-102.
85.
T. Kraft, H. Riedel, Numerical Simulation of Solid State Sintering – Model and Application,
J. Europ. Ceram. Soc. 24 (2004) 345-361.
86.
M. Reiterer, T. Kraft, H. Riedel, Manufacturing of a Gear Wheel Made from Reaction Bonded Alumina - Numerical Simulation of the Sinterforming Process, J. Europ. Ceram. Soc.
24 (2004) 239-246.
87.
M. Reiterer, T. Kraft, U. Janosovits, H. Riedel, Finite Element Simulation of Cold Isostatic
Pressing and Sintering of SiC Components, Ceramics Int. 30 (2004) 177-183.
6
88.
H. Riedel, T. Kraft, Simulations in Powder Technology, Continuum Scale Simulation of
Engineering Materials: Fundamentals – Microstructures – Process Applications, D. Raabe,
F. Roters, F. Barlat, L.Q. Chen (eds.), Wiley-VCH, Berlin (2004) 641-658.
89.
H. Riedel, Sintern, Technische Keramik, W. Kollenberg (ed.), Vulkan-Verlag, Essen (2004)
416-431.
90.
T. Kraft, H. Riedel, Assessment of Fatigue Lifetime of PM-Parts, World Congress on Powder Metallurgy 2004, Vol. 3, EPMA, Shrewsbury, U.K. (2004) 111-116.
91.
K. Lipp, T. Kraft and C.M. Sonsino, Von der Simulation zum Bauteilverhalten am Beispiel
eines PM-Zahnrades, in: Pulvermetallurgie: Simulation – Gefüge - Bauteileigenschaften,
Vol. 20, H. Kolaska (ed.), VDI-Gesellschaft Werkstofftechnik, Düsseldorf, Germany (2004)
61-83.
92.
H. Riedel, J. Svoboda, T. Kraft, Simulation in der Pulvermetallurgie: Möglichkeiten und
Grenzen, in: Pulvermetallurgie: Simulation – Gefüge - Bauteileigenschaften, Vol. 20, H.
Kolaska (ed.), VDI-Gesellschaft Werkstofftechnik, Düsseldorf, Germany (2004) 33-59.
93.
M. Reiterer, T. Kraft, H. Riedel, Application of a Microstructure-based Model for Sintering
and Creep, in: Characterization and Modeling to Control Sintered Ceramic Microstructures
and Properties, C. DiAntonio (ed.), Ceram. Trans. 157 (2004) 49-58.
94.
O. Coube, Y. Chen, D. Imbault, P. Dorémus, R. Maassen, L. Federzoni, P. Jonsén, J. Tweed,
D. Gethin, S. Rolland, A. Maydanyuk , M. Shtern, Computer Simulation of Die Compaction: Guidelines and An Example from the European Dienet Project, World Congress on
Powder Metallurgy 2004, Vol. 5, EPMA, Shrewsbury, U.K. (2004) 209-214.
95.
O. Coube, F. Andrieux, H. Riedel, Numerical Simulation of the Double-Step Pressing of a
Simplified Gear, World Congress on Powder Metallurgy 2004, Vol. 5, EPMA, Shrewsbury,
U.K. (2004) 215-222.
96.
O. Coube, B. Henrich, M. Moseler, H. Riedel, Modelling and Numerical Simulation of
Powder Die Compaction with a Particle Code, World Congress on Powder Metallurgy
2004, EPMA, Shrewsbury, U.K. (2004) 317-324.
97.
H. Riedel, T. Kraft, Rissbildung und Verzug in der Verbindungstechnik durch thermische
Dehnung, Deutsche IMAPS-Konferenz 2004, Paper 19, IMAPS-Deutschland e. V., München (2004) 1-14.
98.
T. Kraft, Simulations in Powder Technology at Fraunhofer IWM, PM DIENET News No. 8,
EPMA, Shrewsbury, U.K. (2005) 3-4.
99.
T. Kraft, H. Riedel, P. Gumbsch, Computer Simulation as a Tool in PM Material Science
and Technology, Proc. 16th Int. Plansee Seminar, Vol. 2, G. Kneringer, P. Rödhammer, H.
Wildner (eds.), PLANSEE AG, Austria (2005) 9-23.
100. T. Kraft, B. Henrich, C. Bierwisch, M. Moseler, H. Riedel, Modeling and Simulation of Processing Steps in Powder Technology using Particle Dynamics, Proc. 16th Int. Plansee Seminar, Vol. 2, G. Kneringer, P. Rödhammer, H. Wildner (eds.), PLANSEE AG, Austria (2005)
69-81.
101. T. Kraft, B. Henrich, M. Moseler, H. Riedel, Multi-Scale Modelling and Simulation of Sintering, 4th Int. Conf. on Science, Technology and Applications of Sintering, D. Bouvard (ed.),
INPG, Grenoble, France (2005) 220-223.
102. K. Korn, T. Kraft, H. Riedel, Modelling of anisotropic shrinkage during liquid phase sintering, 4th Int. Conf. on Science, Technology and Applications of Sintering, D. Bouvard (ed.),
INPG, Grenoble, France (2005) 260-263.
103. T. Kraft, H. Riedel, D. Schwanke, E. Müller, Simulation von Rissbildung und Verzug in der
Mikroelektronik, PLUS 7 (2005) 883-886.
7
104. A. Kailer, T. Hollstein, W. Pfeiffer, T. Kraft, Keramische Walzwerkzeuge aus Siliciumnitrid
zur Herstellung von Drähten, Rohren und Bändern, in: Handbuch Technische Keramische
Werkstoffe, J. Kriegesmann (ed.), Fachverlag Deutscher Wirtschaftsdienst, Köln, Kapitel
8.3.2.5 (2005) 1-62.
105. I. Schmidt, A. Wonisch, B. Henrich, M. Moseler, H. Riedel, Computation of Macroscopic
Yield Surfaces by Particle Methods, Euro PM 2005, Vol. 3, EPMA, Shrewsbury, U.K. (2005)
363-368.
106. T. Kraft, H. Riedel, C. Zeilmann, D. Schwanke, Einfluss des Layouts auf das Versagen von
BGAs, Deutsche IMAPS-Konferenz 2005, Paper 14, IMAPS-Deutschland e. V., München
(2005) 1-28.
107. J. Beinert, R. Kübler, H. Kordisch, L. Könczöl, T. Kraft, G. Kleer, On the characterisation of
industrial PV manufacturing lines with respect to silicon fracturing, 20th European Photovoltaic Solar Energy Conference, Barcelona (2005) 1167-1170.
108. O. Coube, A.C.F. Cocks, C.Y. Wu, Experimental and Numerical Study of Die Filling, Powder Transfer and Die Compaction, Powder Metall. 48 (2005) 68-76.
109. O. Coube, P. Jonsén, T. Kraft, Y. Chen, D. Imbault, P. Dorémus, D. Gethin, S. Rolland, L.
Federzoni, A. Maydanyuk , M. Shtern, A. Cocks, R. Maassen, J. Tweed, W. Markeli, Numerical Simulation of Die Compaction: Case Studies and Guidelines from the European Dienet Project, Euro PM 2005, Vol. 3, EPMA, Shrewsbury, U.K. (2005) 313-319.
110. C. Bierwisch, B. Henrich, T. Kraft, M. Moseler, H. Riedel, 3D-Modelling of Die Filling, Euro
PM 2005, Vol. 3, EPMA, Shrewsbury, U.K. (2005) 331-337.
111. G. Petrosyan, T. Kraft, Application of Plasticity Theory for Simulating Compaction of Granular Materials, Report 1. Equations of plasticity theory of a constitutive model for metal
powder, Proceedings of Engineering Academy of Armenia. Science and Technological,
Vol. 2, No. 4 (2005) 538-543.
112. G. Petrosyan, T. Kraft, Application of Plasticity Theory for Simulating Compaction of Granular Materials, Report 2: Development of Method for Solving the Hardening Behaviour of
Metal Powders During Compaction, Proceedings of Engineering Academy of Armenia.
Science and Technological, Vol. 3, No. 2 (2006) 234-241.
113. H. Riedel, J. Svoboda, Simulation of Microwave Sintering with Advanced Sintering Models,
Advances in Microwave and Radio Frequency Processing, M. Willert-Porada (ed.), Springer,
New York (2006) 210-216.
114. A. Wonisch, T. Kraft, H. Riedel, Multi-Scale Simulations of Rearrangement Effects and Anisotropic Behavior during Sintering, 11th Int. Ceramics Congress, Advances Sci. Tech., Vol.
45, Trans Tech Pub., Zürich, Switzerland (2006) 530-538.
115. A. Wonisch, K. Korn, T. Kraft, H. Riedel, Anisotropic Liquid Phase Sintering Investigated by
Means of Micromechanical and Discrete Element Modeling, 3. Int. Conf. Multiscale Materials Modelling, P. Gumbsch (Ed.), Fraunhofer IRB Verlag, Stuttgart (2006) 578-581.
116. T. Kraft, H. Riedel, Optimierung von Sinterverzügen durch Computersimulation, in: Distortion Engineering – Verzugsbeherrschung in der Fertigung III, Kolloquium des SFB 570,
Band 3, Universität Bremen (2006) 27-38.
117. H. Riedel, A. Wonisch, C. Bierwisch, T. Kraft, M. Moseler, Simulation von Prozessfolgen
mit der Diskrete-Elemente-Methode, Pulvermetallurgie – Kompetenz und Perspektive, Vol.
22, H. Kolaska (ed.), Heimdall Verlag, Witten, Germany (2006) 153-175.
118. A. Rundel, T.Kraft, Compacting of Multi-Level Parts Made of Ceramic Powder Materials,
cfi/Ber. DKG 83 No. 5 (2006) E114-E115
8
119. B. Henrich, A. Wonisch, T. Kraft, M. Moseler, H. Riedel, Simulations on the Influence of
Rearrangement during Sintering, Acta Mater. 55 (2007) 753-762.
120. A. Wonisch, O. Guillon, T. Kraft, M. Moseler, H. Riedel, J. Rödel, Stress-induced Anisotropic Behavior of Sintering Alumina: Discrete Element Modelling and Experiments, Acta Mater. 55 (2007) 5187-5199.
121. C. Bierwisch, T. Kraft, H. Riedel, M. Moseler, Predicting Density Distributions in Die Filling,
in Euro PM2007, vol. 3, EMPA ,Shrewsbury, U.K. (2007) 305-310.
122. T. Kraft, A. Wonisch, I. Schmidt, H. Riedel, Neue Entwicklungen in der Simulation von Sintervorgängen, Thermische Verfahrenstechnik, R. Clasen, M. Herrmann, A. Roosen (eds.),
Fortschrittsberichte DKG, Vol. 21, No. 1, Deutsche Keramische Gesellschaft, Köln, Germany (2007) 50-59
123. A.C.F. Cocks, D.T. Gethin, H.Å. Häggblad, T. Kraft, O. Coube, Compaction Models, in:
Modelling of Powder Die Compaction, Series: Engineering Materials and Processes, P.R.
Brewin, O. Coube, P. Doremus, J.H. Tweed (eds.), Springer, London (2007) 43-64.
124. T. Seifert, T. Schenk, I. Schmidt, Efficient and modular algorithms in modelling finite inelastic
deformations: Objective integration, parameter identification and substepping techniques,
Comput. Methods Appl. Mech. Engng., 196 (2008), 2269-2283
125. C. Bierwisch, T. Kraft, M. Moseler, H. Riedel, Simulation of Die Filling in 3D with Special
Emphasis on Vibration Supported Filling, Advances in Powder Metallurgy Particulate Materials, R. Lawcock, A. Lawley, P.J. McGeehan (eds.), World PM 2008, Part 1, MPIF, Princeton, NJ (2008) 130-138.
126. D. Schwanke, J. Pohlner, A. Wonisch, T. Kraft, J. Geng, Enhancement of Fine Line Print
Resolution due to Coating of Screen Fabrics, MiNaT Hot Spots 2008, Industry – Science
Dialogue, Messe Stuttgart, Stuttgart (2008) CD only.
127. B.A. Yazici, T. Kraft, H. Riedel, Finite Element Modelling of PM Surface Densification Process, Powder Metall. 51 (2008) 211-216.
128. I. Schmidt, T. Kraft, H. Riedel, Numerical homogenisation of elasto-plastic granule assemblies using discretised particles, Euro PM 2008, vol. 3, EPMA, Shrewsbury, U.K. (2008)
169-173.
129. H. Riedel, C. Bierwisch, T. Kraft, Simulation der Herstellungsprozesse für Hartstoffe, Pulvermetallurgie: Neue Anforderungen - Neue Produkte - Neue Verfahren, Vol. 24, H. Kolaska (ed.), Heimdall Verlag, Witten, Germany (2008) 3-18.
130. C. Bierwisch, B. Lang, M. Nebelung, T. Kraft, Simulation des Fließverhaltens von Pressgranulaten, Pulvermetallurgie: Neue Anforderungen - Neue Produkte - Neue Verfahren, Vol.
24, H. Kolaska (ed.), Heimdall Verlag, Witten, Germany (2008) 119-135.
131. M. Nebelung, M. Fries, T. Kraft, Produktdesign von Pressgranulaten – Anforderungen und
Realität, Pulvermetallurgie: Neue Anforderungen - Neue Produkte - Neue Verfahren, Vol.
24, H. Kolaska (ed.), Heimdall Verlag, Witten, Germany (2008) 107-118.
132. D. Schwanke, J. Pohlner, A. Wonisch, T. Kraft, J. Geng, Enhancement of Fine Line Print
Resolution due to Coating of Screen Fabrics, Ceramic Interconnect and Ceramic Microsystems Technologies 2008, Session WP24, IMAPS, München (2008) 301-308.
133. D. Schwanke, J. Pohlner, A. Wonisch, T. Kraft, J. Geng, Enhancement of Fine Line Print
Resolution due to Coating of Screen Fabrics, Int. J. Microelectronics Electronic Packaging 6
(2009) 13-19.
134. A. Wonisch, T. Kraft, M. Moseler, H. Riedel, Discrete Element Simulations of Constrained
Ceramic Powder Sintering, cfi/Ber. DKG 85, no 13 (2008) 18-23.
9
135. A. Wonisch, T. Kraft, M. Moseler, H. Riedel, Discrete Element Modeling of Anisotropy Development during Sintering of Alumina, 10th Int. Conf. Europ. Ceramic Soc., Göller Verlag, Baden-Baden (2008) CD-ROM
136. T. Seifert, I. Schmidt, Line-search methods in general return mapping algorithms with application to porous plasticity, Int. J. Numer. Meth. Engng. 73 (2008) 1468-1495
137. C. Bierwisch, T. Kraft, H. Riedel, M. Moseler, Three-dimensional discrete element models
for the granular statics and dynamics of powders in cavity filling, J. Mech. Phys. Solids 57
(2009) 10-31.
138. C. Bierwisch, T. Kraft, H. Riedel, M. Moseler, Die filling optimization via three-dimensional
discrete element modeling, Powder Technology 196 (2009) 169-179.
139. A. Wonisch, T. Kraft, M. Moseler, H. Riedel, Effect of different particle size distributions on
solid-state sintering: A microscopic simulation approach, J. Am. Ceram. Soc. 92 (2009)
1428-1434.
140. T. Kraft, C. Bierwisch, H. Riedel, New advances in modeling powder metallurgical processing steps, Proc. 17th Int. Plansee Seminar, Vol. 3, L.S. Sigl, P. Rödhammer, H. Wildner
(eds.), PLANSEE AG, Austria (2009) WS 6/1-11.
141. M. Gall, B. Thielicke, I. Schmidt, Integrity of piezoceramic patch transducers under cyclic
loading at different temperatures, Smart Matr. Struct. 18 (2009) 104009 (10 pages)
142. J. Heinonen, I. Schmidt, An analysis of the stress state in a green part during ejection from
the die, Euro PM 2009, vol. 3, EPMA, Shrewsbury, U.K. (2009) 53-58.
143. M. Moseler, C. Bierwisch, T. Kraft, H. Riedel, Three-dimensional discrete element models
for the granular statics and dynamics of powders, Computational Methods for Coupled
Problems in Science and Engineering, B. Schrefler, E-Onate, M. Papadrakakis (eds.), Coupled Problems 2009, CIMNE, Barcelona (2009) CD only.
144. T. Seifert, I. Schmidt, Plastic yielding in cyclically loaded porous materials, Int. J. Plasticity
25 (2009) 2435-2453.
145. I. Schmidt, A. Trondl, T. Kraft, Modelling of the Material Behaviour of Metal-Powders for
use in Process Simulations, Multiphysics Simulation - Advanced Methods for Industrial Engineering, 1st Int. Conf., Fraunhofer SCAI, Bonn (2010) CD only.
146. I. Schmidt, T. Kraft, Simulation of the co-sintering of composite structures, Int. J. Mater.
Res. 101 (2010) 933-941 - DOI: 10.3139/146.110364.
147. A. Wonisch, T. Kraft, Entwicklung und Anwendung numerischer Simulationsmethoden für
den Siebdruck, in: Entwicklung nanotechnologischer Siebbeschichtungen und daran angepasster Pastensysteme für den Fine.-Line-Druck von keramischen Schaltungsträgern, D.
Schwanke et al. (Ed.), Verlag Detert, Templin, Germany, ISBN 978-3-934142-39-8 (2010)
47-63.
148. I. Schmidt, A. Trondl, T. Kraft, A. Wonisch, Simulation of the Material Behaviour of Metal
Powders during Compaction, J. Process Mech. Eng. 224 (2010) 187-194.
149. T. Kraft, I. Schmidt, H. Riedel, Simulation von pulvermetallurgischen Formgebungsverfahren, Formgebung: Chancen der Pulvermetallurgie, Vol. 26, H. Kolaska (ed.), Heimdall
Verlag, Witten, Germany (2010) 61-72
150. A. Wonisch, P. Polfer, T. Kraft, A. Dellert, A. Heunisch, A. Roosen, A Comprehensive Simulation Scheme for Tape Casting: From Flow Behavior to Anisotropy Development, J. Am.
Ceram. Soc.
10
151. T. Breinlinger, A. Wonisch, T. Kraft, Simulation of particulate flows using coupled SPH and
DEM simulations, in: 6th Int. SPHERIC Workshop, T. Rung, C. Ulrich (Eds.), Elbepartner
Breitschuh & Kock, Hamburg, Germany, ISBN 978-3-89220-658-3 (2011) 66-71
11
Other Publications
Annual Reports
1. T. Kraft, H. Riedel, Simulation des Pressens und Sinterns einer Dichtscheibe aus Al2O3, Jahresbericht Fraunhofer IWM (1998) 62-64.
2. T. Kraft, H. Riedel, Korrektur von Sinterverzügen durch rechnerisch ermittelte Stempelkonturierung, Jahresbericht Fraunhofer IWM (1999) 54-55.
3. O. Coube, T. Kraft, H. Riedel, Optimierung einer pulvertechnologisch hergestellten Kühldose
durch numerische Simulation, Jahresbericht Fraunhofer IWM (2000) 64-67.
4. T. Kraft, H. Riedel, Simulation des Brennprozesses bei der Herstellung von Gebrauchskeramiken, Jahresbericht Fraunhofer IWM (2001) 62-63.
5. M. Reiterer, T. Kraft, Finite-Elemente-Simulation des Sinterformens von reaktionsgebundenem Aluminiumoxid, Jahresbericht Fraunhofer IWM (2002) 50-51.
6. T. Kraft, Kombinierte Prozess- und Betriebsfestigkeitssimulationen in der Pulvermetallurgie,
Jahresbericht Fraunhofer IWM (2004) 47.
7. B.A. Yazici, T. Kraft, Simulation der Nachverdichtung beim Rollieren eines Zahnrads aus Sinterstahl, Jahresbericht Fraunhofer IWM (2005) 47.
8. T. Kraft, Simulation von keramischen Schaltungsträgern, Jahresbericht Fraunhofer IWM
(2006) 46.
9. C. Bierwisch, T. Kraft, Dichteverteilungen beim Matrizenfüllen, Jahresbericht Fraunhofer
IWM (2007) 51.
10. A. Wonisch, T. Kraft, Strömungsmechanische Simulation des Siebdrucks, Jahresbericht
Fraunhofer IWM (2008) 44.
Ph.D. and Master Theses
1. G. Elsen, Verfahrenstechnische Untersuchungen zum Trockenpressen von freinkörnigem
Zirkonoxidpulver, Master Thesis, Berufsakademie Lörrach, Lörrach, Germany (1991)
2. O. Coube, The Evolution of Density Disturbances during Sintering, Master Thesis, Thèse de
l’Université Pierre et Marie Curie Paris 6, Paris (1992)
3. H. Zipse, Mechanisches Verhalten beim Sintern - Diffusionsmodelle und Verifikation an ZrO2,
Dissertation, Universität Karlsruhe, Karlsruhe, Germany (1994)
4. D. Meyer, Experimentelle Ermittlung und numerische Simulation des mechanischen Verhaltens unterschiedlicher Si3N4 Pulver beim Matrizenpressen, Dissertation, Universität Karlsruhe, Karlsruhe, Germany (1995)
5. R. Gaebel, Sinterumformversuche an Si3N4 - Materialverhalten beim Flüssigphasensintern,
Dissertation, Universität Karlsruhe, Karlsruhe, Germany (1996)
6. B. Blug, Sinterumformversuche an Siliciumcarbid, Thesis, Universität Freiburg, Freiburg
(1997)
7. M.H. Convert, Sinterumformen von Oxidkeramiken, Master Thesis, Fachhochschule Offenburg, Offenburg (1997)
12
8. B. Blug, Sinterumformversuche an Siliciumcarbid - mechanisches Verhaltens beim Festphasensintern, Master Thesis, Universität Freiburg, Freiburg (1998)
9. O. Coube, Modelling and Numerical Simulation of Powder Die Compaction with Consideration of Cracking, Dissertation, Thèse de l’Université Pierre et Marie Curie Paris 6, Paris (1998)
10. M. Reiterer, Mechanisches Verhalten von Grünkörpern im Zylinderdruck- und Scheibendruckversuch, Master Thesis, Institut für Struktur- und Funktionskeramik, Montanuniversität
Leoben, Austria (2000).
11. G. Rottmann, Mechanisches Verhalten beim Trockenpressen - Triaxialversuche an SiC und
Stahlpulver zur Untersuchung von Werkstoffmodellen, Dissertation, Universität Karlsruhe,
Karlsruhe, Germany (2001)
12. D. Hennemann, Instrumentierte Matrize, Master Thesis, Fachhochschule Offenburg, Offenburg (2003)
13. M. Reiterer, Simulation der Heißformgebung von reaktionsgebundenem Aluminiumoxid,
Dissertation, Institut für Struktur- und Funktionskeramik, Montanuniversität Leoben, Austria
(2004)
14. B.A. Yazici, Numerical Optimisation of a Workpiece Geometry for PM Surface Densification
Process, Master Thesis, RWTH-Aachen, Aachen (2005)
15. B. Henrich, Partikelbasierte Simulationsmethoden in Pulvertechnologie und Nanofluidik, Fakultät für Mathematik und Physik der Albert-Ludwigs-Universität Freiburg, Freiburg (2007)
16. A. Wonisch, Entwicklung und Anwendung partikelbasierter Simulationstechniken für die
Modellierung von Umordnungseffekten und Anisotropieentwicklung in pulvertechnologischen Prozessen, Fakultät für Mathematik und Physik der Albert-Ludwigs-Universität Freiburg, Freiburg (2008)
17. C. Bierwisch, Numerical Simulations of Granular Flow and Filling, Dissertation, Fakultät für
Mathematik und Physik der Albert-Ludwigs-Universität Freiburg, Freiburg (2009)
13
Patents
1. C. Bierwisch, M. Moseler, T. Kraft, H. Riedel, Verfahren und Vorrichtung zur Homogenisierung einer Pulverschüttung bei der Herstellung von Pulverpresslingen, Erteilung 15.4.2010,
Patent-Nr. DE 10 2009 005 859 B3
14