UPS - enermax24.de

Transcription

UPS - enermax24.de

UNINTERRUPTIBLE POWER SUPPLY
UPS
GUARANTEED
ENERGY
ABSOLUTE
EFFICIENCY
THE GLOBAL SPECIALIST
IN ELECTRAL AND DIGITAL BUILDING INFRASTRUCTURES
®
INDEX
• General Features
page
4
• Modular UPS
page
12
page
32
• Line Interactive UPS
page
44
• Accessories Communication
page
50
page
56
• Conventional UPS
• Services
INDEX
WWW.UPS.LEGRAND.COM
UPS
3
VDI STRUCTURED CABLES
4
ELECTRICAL PROTECTION
LIGHTING MANAGEMENT
HOSPITAL SIGNALLING
ENERGY MANAGEMENT
®
TERTIARY
A PROPOSAL
FOR THE BUILDING
IN CONTINUOUS
EVOLUTION
MEASUREMENT SYSTEMS
ENERGY DISTRIBUTION
A guarantee of
the highest level
in “Business
Continuity”
UPS UNINTERRUPTABLE POWER SUPPLY
SYSTEM SUPERVISION
FIRE ALARM SYSTEMS
LEGRAND, worldwide leader in manufacturing
electrical equipment, offers a wide range
of solutions for the tertiary sector fit to
satisfy system requirements: from data
network cable systems, and conduit
and distribution systems, to system control
and management.
TODAY, with an eye on technological
development that respects the environment
and responds to a continuously evolving
market, LEGRAND proposes a new
range of UPS. A complementary range
of technological functions to guarantee
maximum protection in all systems.
GENERAL FEATURES
WWW.UPS.LEGRAND.COM
UPS
5
Energy efficiency
and savings
6
®
maximum
quality
of energy output
High efficiency
Evolved technology
UPS with cutting-edge
manufacturing characteristics
that make it possible to obtain
efficiency up to 95% for
a significant energy
and economic savings.
Products with double conversion
ONLINE technology
capable of re-phasing
the power supply system
and guaranteeing maximum
quality of usable energy.
Environmentally
friendly products
Efficient UPS manufactured
giving them maximum attention.
In a development view that
is environmentally friendly,
LEGRAND developed an innovative
test system that drastically
reduces energy consumption
for each machine produced.
GENERAL FEATURES
WWW.UPS.LEGRAND.COM
UPS
7
8
®
reliability
and safety
Technological excellence
of the uninterruptible
power supplies
Reliable
electronics
Components
of latest generation
High performance
Batteries
Optimum sizing for power
stages and extensive, in-depth
tests guarantee a notable level
of reliability.
Careful research for the best
electronic components present
on the market, combined with
the most modern production
methods, make Legrand UPS
extremely reliable machines
and in step with the times.
Batteries supplied with Legrand
UPS are the best available on the
market. An innovative charging
system significantly extends
battery life, even by 50%
GENERAL FEATURES
WWW.UPS.LEGRAND.COM
UPS
9
THE RANGE OF
UPS
p12
MODULAR
UPS up to 120kVA
with the maximum degree
of redundancy (power
and control) suitable
for applications where
expansion flexibility
and quick maintenance
are required.
10
p32
CONVENTIONAL
UPS up to 10kVA
guarantee
a power supply
system that is
safe and reliable.
®
Calibrated solutions
for every context
p44
LINE INTERACTIVE
UPS up to 3 kVA
entry level, they are
ideal protection
for work station, telephone
switchboards, home
automation applications and
small tertiary.
LEGRAND proposes a range of UPS
divided into 3 different types.
An offering for all application
environments with solutions that
guarantee maximum protection in terms
of power and uptime.
With LEGRAND UPS it is possible to
obtain the correct solution for every need.
p50
COMMUNICATION ACCESSORIES
A complete range of
communication devices
allows you to remotely
manage, configure and
control the UPS.
THE RANGE OF UPS
WWW.UPS.LEGRAND.COM
UPS
11
12
®
UPS
MODULAR
MEGALINE
TRIMOD
ARCHIMOD
Flexible, expandable and redundant solutions
Allows to size the UPS
on a needs-basis and allows
for future implementations.
They are made of «STANDARD»
modules that can be added
to existing machines in order
to expand both power and uptime.
They guarantee maximum levels
of redundancy thanks to the
innovative three-phase
system made of individual
single-phase modules.
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
13
ARCHIMOD DYNAMIC
THREE-PHASE
AND TRIMOD SYSTEMS
UPS with exclusive technology capable of
adapting to all types of systems in the best
possible way.
These machines have an innovative modularity
concept that optimizes the availability of power,
increases system flexibility and reduces the
total cost of operation (TCO).
Highly standardised structures, made of
individual single-phase modules, guarantee the
highest levels of granularity on the market.
14
®
ARCHIMOD and
TRIMOD have received
from FROST & SULLIVAN
the prestigious prize
Product Differentiation
Excellence award 2011
for the EMEA area.
Granularity
of power
Three-phase UPS are
composed of redundant
and self-configuring
individual single-phase
modules for fast and
safe power increases.
Optimisation
of interventions
Transport, installation
and maintenance
interventions are
easier to manage with
UPS power modules
given their reduced
dimensions and weight
(only 8.5 kg).
FLEXIBILITY
MODULARITY
SCALABILITY
ARCHIMOD
AND TRIMOD
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
15
ARCHIMOD
AND TRIMOD
EXCLUSIVE
FEATURES
Power scalability
Power expansion, for both product
families, can always be obtained
within the same cabinet in an
extremely simple and immediate
manner, without the need to
re-configure the system and UPS.
TRIMOD
10 to 60 kVA
ARCHIMOD
20 to 120 kVA
Scalability uptime
Based on UPS power and the request
for uptime, expansion may take place
both in the same cabinet, adding
battery slots or in additional battery
cabinets.
Compact non modular battery cabinets
that further extend uptime reaching a
level of hours, are also available.
16
®
R
S
T
R
S
T
Redundancy
on the single-phase load
In a system with three-phase
power supply and single-phase
load, if one of the power modules
breaks down, there is no power
loss since it is supplied by
the other operating modules.
KO
LOAD
R
S
LOAD
T
R
S
T
Redundancy
on the phases
In a system with three independent
outputs, redundancy can be set
on individual phases.
If one of the power modules breaks
down, modules of the same phase
make up for the absence
of the faulty module.
KO
L1
L2
L3
L1
L2
L3
R
S
T
R
S
T
R
S
T
Redundancy
on control
In UPS composed of several
control modules, if one of them
breaks down, only the modules
controlled by it will shut-down.
Lost power, however, is
automatically redistributed
to other modules to guarantee
service continuity.
KO
R
S
T
MODULAR
THREE-PHASE
Maximum levels
of redundancy
Thanks to modular UPS construction
technology, various redundancy levels
can be set to always guarantee maximum
service continuity.
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
17
ARCHIMOD
Efficiency up
to 95% when in
ON LINE MODE
Standard modules
with self-configurable
Plug&Play system
Power factor close
to 1 at input
Multi IN/OUT to obtain
different three-phase
or single-phase
configurations ON SITE
ARCHIMOD is the UPS with a modular
and expandable architecture with power
from 20 to 120kVA, in 19 inch rack cabinet.
The system is made from a set of
standard and pre-assembled components
that allow simplifying and speeding up
the design and completion process
for infrastructures.
18
MODULAR
THREE-PHASE
®
MODULAR
ARCHITECTURE
6
1 Control logics
Equipped with microprocessor, it manages 3 power
modules.If combined with a power expansion
module, it can manage up to 6 power modules,
thus increasing power from 20 to 40kVA.
It comes equipped with a multifunction display
and keyboard to monitor UPS operating parameters,
and to configure numerous functions.
It can be connected in parallel to other control
modules and with power modules.
On the front side, there is a backlit status indicator to
immediately identify the system’s operation status,
and an RS232 communication port for maintenance.
1
2 Power modules
Power modules, with power equal to 6.7 kVA,
are extremely compact and easy to move.
Equipped with a plug-in and real hot-swap system,
installation and maintenance is quick.
They work in parallel with all modules to guarantee
maximum system performance.
2
3
3 Power expansion module
It must be combined with a control module.
Power can be increased from 20 to 40 kVA,
and redundancy on single-phase can be set.
4 Battery module
4
Each module has batteries that can be connected
to others in series, creating independent strings.
The compactness and functionality of individual
modules (plug-in) means they can be easily moved
and expanded without changing the installed
solution (flexibility and scalability).
5 Distribution
UPS can be configured directly on site into different
distribution systems (three-three, three-single,
single-single and single-three). Inside there
are terminal blocks for in-out connection,
movement and protection components, and the
predisposition for additional battery cabinets.
Power supply can be configured on two separate
input networks (primary and emergency by-pass).
6 Input cable
Input cable compartments allow inserting in-out
connection cables at both the top and bottom.
5
6
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
19
TRIMOD
Modular and upgradable
with power from
10 to 60kVA in compact
structures with a reduced
footprint.
MODULAR
THREE-PHASE
The completely modular structure enables programming each
individual power module in order to obtain the desired input/output
configuration.
It is possible to manage three-phase or single-phase output
and input voltage in order to choose, 3-3 phases, 3-1 phases,
1-3 phases and 1-1 phase.
Furthermore, it is possible to obtain single-phase and three-phase
output lines simultaneously or two or more single-phase lines,
even of different power levels (upon request).
Control display
The TRIMOD system is completely managed by
a microprocessor and using the keyboard on
the LCD display it is possible to:
- set and view operational data in real time
- configure and control parameters for each
power module
- access event logs
- complete functional tests
Compact and reduced footprint versions
The compact dimensions, the vertical build of the structure
and 2 small wheels located in the rear help with positioning and
transporting the UPS, even in rooms that are not easy to access.
20
®
Modular UPS redundant
and upgradable up to
10kVA with perfomance
and functions at the top
of their category
THEY ARE AVAILABLE IN THREE FORMATS:
- SINGLE CABINET;
- DOUBLE CABINET;
- 19 INCH RACK.
All models have a microprocessor control
card that can be configured on
the display, by modules powered by
1250 VA each, and by battery kits
that contain no. 3x9Ah batteries.
MEGALINE
MODULAR
SINGLE-PHASE
The single cabinet and 19 inch rack models issue a power from
1250 to 5000 VA, they can house a maximum of 4 power boards
and 4 battery kits. Additional batteries can be stored in specific
cabinets, which can be easily connected thanks to an uptime
upgrading pre-setting.
The range is completed with products made of two cabinets;
the first cabinet can house up to 8 power modules,
each up to 1250 VA, reaching a maximum power of 10kVA.
In the second cabinet it is possible to insert up to 10 battery kits
and an additional battery charger.
Other battery cabinets identical to the one supplied can
be added in order to further upgrade uptime.
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
21
ARCHIMOD
Modular three-phase UPS with double conversion VFI
CONFIGURATIONS
20
40
60
80
100
120
Power: 20 kVA
Uptime (80% of the load): 1h
1 Cabinet
1 Control module
3 Power modules
30 Battery modules
1 Distribution modules
Power: 40 kVA
Autonomy (80% of the load): 20 min
1 Cabinet
2 Control modules
6 Power modules
24 Battery modules
3 108 55
3 104 54
Pack.
Item
3 108 40
CONFIGURABLE CABINETS
The cabinets are supplied empty and are pre-set for power and
uptime as indicated in the table
NOMINAL
POWER KVA
3 104 51 *
3 104 52
3 104 53
3 104 54
3 104 55
3 104 56
3 104 57
NO. BATTERY NO. MODULES
MODULES FOR CONTROL
20
20
40
60
80
100
120
12
30
24
18
-
NO. MODULES
FOR POWER
EXPANSION
NO. PHASES
1
2
3
3-1/3-3
3-1/3-3
3-3/3-3
3-3
3-3
3-3
3-3
1
1
2
3
3
3
3
Power: 60 kVA
Uptime (80% of the load): 6 min
1 Cabinet
3 Control modules
9 Power modules
18 Battery modules
Power: 80 kVA
2 Cabinets
3 Control modules
1 Power expansion module
12 Power modules
36 Battery modules
* cabinet with 18 rack units available
ADDITIONAL CABINETS FOR BATTERIES
DESCRIPTION
3 108 18
3 108 21
3 108 22
3 108 23
3 108 24
3 108 65
3 108 66
Empty modular battery cabinet
Battery cabinet for 20kVA UPS
with 21 94 Ah long life batteries
Battery cabinet for 40-60kVA UPS
Battery cabinet for 80kVA UPS
Battery cabinet for 100-120kVA UPS
Cover for closing empty battery slots
Cover for closing empty power module slots
Power: 100 kVA
2 Cabinets
3 Control modules
2 Power expansion modules
15 Power modules
36 Battery modules
Power: 120 kVA
2 Cabinets
3 Control modules
3 Power expansion modules
18 Power modules
36 Battery modules
ACCESSORIES
DESCRIPTION
3 108 40
3 108 64
3 108 55
3 108 56
6.7kVA power module
Front/rear closing door
Kit of 3x9Ah battery slots
Kit of 3 empty battery slots
NOTE: autonomy values, expressed in minutes, are measured during optimal
operating conditions.
22
ARCHIMOD
3 104 51
3 104 52
3 104 53
Nominal Power (kVA)
20
Active power (kW)
18
Idem
3 104 54
3 104 55
3 104 56
3 104 57
40
60
80
100
120
36
54
72
90
108
General features
Module Power (kVA)
6.7 for the Power Module (20kVA with 3 Modules), power factor 0.9
Technology
System
Hot Swap capacity
On-Line Double Conversion VFI-SS-111
Modular, expandable and redundant UPS system in just one 19’’ rack cabinet
Possibility of replacing the power modules and/or battery without turning off the UPS
Input features
Input voltage
230V 1F+N, 400V 3F+N
400V 3F+N
Input frequency
Input Voltage Range
50-60 Hz ±2% Autosensing
230V +15%/-20% 1F
400V +15%/-20% 3F
400V +15%/-20% 3F
‹ 3%
THD Input Current
Configurable in order to achieve synchronism between input
and output frequencies, even for wider frequency ranges, ±14%
Compatibility with Power-Supply Units
› 0,99
Input Power Factor
Output features
Output voltage
230V 1F, 400V 3F
400V 3F
Performance at Full Load
95%
Nominal output frequency
50/60 Hz ±0.1
Crest Factor
3,5:1
Output Voltage Tolerance
±1%
Allowed Overload
10 minutes at 125% and 1 minute at 150%
Performance in Eco Mode
99%
Bypass
Automatic and maintenance bypass
Batteries
The battery modules are designed to easily be fitted inside the cabinet.
No particular operation is necessary to connect them
Battery Module
Battery Series Type/Voltage
Uptime
VRLA - AGM / 252 Vdc
Configurable and expandable both internally and with additional battery cabinets
Battery Charge
Smart Charge technology. 3-stage advanced cycle
Configuration and management
4 lines/20 characteristics, 4 buttons for menu navigation,
multi-colour LED status indicator
Display and Signals
2 RS232 serial ports, 1 Logical gate, 5 ports with dry contacts,
2 slots for SNMP interfaces (optional)
Communication Ports
Emergency Power Off (EPO)
Yes
Remote Management
Available
Physical features
Dimensions (H x W x D) (mm)
2080 x 570 x 912 (42U)
Installed Power Modules
3
6
9
12
15
Installable Battery Slots
Up to 30
Up to 24
Up to 18
-
-
-
205
240
276
272
318
364
13650
16380
Net Weight (kg)
18
Environmental conditions
Operating Temperature/Humidity
0 - 40 °C / 20 - 80% non-condensing
Degree of protection
IP21
Maximum Audible Noise at 1 m from the Unit (dBA)
Heat Loss (BTU/h)
50÷65
2730
5460
8190
10920
Conformity
Certifications
Standard Warranty
EN 62040-1, EN 62040-2, EN 62040-3
2-year warranty
Services
Installation
Maintenance
Can be performed by the user, modular architecture with "plug and play"
power and battery modules for easy installation and configuration
Can be performed by the user, optional services available from the manufacturer
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
23
TRIMOD
Pack.
Item
3 103 98
3 104 04
3 104 10
3 104 16
3 104 21
3 104 28
NOMINAL
POWER
KVA
ACTIVE
POWER
KW
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
10
15
20
30
40
60
9
13,5
18
27
36
54
0'
0'
0'
0'
0'
0'
1
1
1
1
1
1
120
120
120
146
146
165
POWER CABINETS (EMPTY)
3 108 40
3 104 36
3 104 37
3 104 38
3 104 39
3 104 40
3 104 41
3 103 99
POWER CABINETS
NO. POWER
MODULES
NO. BATTERY
MODULES
POWER MODULE
TYPES
NO. PHASES
3
3
6
6
6
9
12
12
-
3 x 3,4 kVA
3 x 5 o 6,7 kVA
6 x 3,4 kVA
6 x 5kVA
6 x 6,7kVA
9 x 6,7kVA
1-1 / 3-3 / 3-1 / 1-3
1-1 / 3-3 / 3-1 / 1-3
3-3
1-1/3-3/3-1/1-3
3-3
3-3
3 108 43
ACCESSORIES
Pack.
Item
3 103 99
3 104 00
3 104 01
3 104 00 + 3 107 57
3 104 00 + 3 107 58
3 104 05
3 104 06
3 104 06 + 3 107 60
3 104 06 + 3 107 63
3 104 04 + 3 108 08
3 104 11
3 104 12
3 104 12 + 3 107 58
3 104 12 + 3 108 08
3 104 12 + 2 x 3 107 58
3 104 16 + 3 107 57
3 104 16 + 3 107 58
3 104 16 + 3 108 09
3 104 16 + 2 x 3 108 09
3 104 21 + 3 107 63
3 104 21 + 2 x 3 107 58
3 104 21 + 3 108 10
3 104 21 + 3 x 3 107 59
3 104 21 + 4 x 3 107 64
3 104 21 + 3 x 3 108 10
3 104 28 + 2 x 3 107 58
3 104 28 + 2 x 3 107 64
3 104 28 + 3 108 11
3 104 28 + 3 x 3 107 64
+ 3 107 60
3 104 28 + 2 x 3 108 11
3 104 28 + 3 x 3 108 11
3 104 28 + 4 x 3 108 11
DESCRIPTION
UPS
NOMINAL
POWER
KVA
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
10
10
10
10
10
15
15
15
15
15
20
20
20
20
20
30
30
30
30
40
40
40
40
40
40
60
60
60
60
11'
17'
35'
54'
68'
13'
21'
33'
57'
109' *
9'
14'
35'
81' *
59'
6'
12'
50' *
109' *
8'
16'
33' *
38'
60'
120' *
9'
15'
17' *
32'
1
1
1
2
2
1
1
2
2
2
1
1
2
2
3
2
2
2
3
2
3
2
4
5
4
3
3
2
5
167
223
279
471
527
220
279
413
550
865
220
279
572
865
574
378
434
890
1645
564
801
925
439
1663
2430
830
942
952
1579
60
60
60
50' *
80' *
110' *
3
4
5
1715
2474
3234
* Configurations with battery cabinets (20 x 94 Ah).
Battery cabinet dimensions and weight: A x L x P 1635 x 600 x 800 (mm), 785 kg
NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions.
24
3 108 36
3 108 38
3 108 40
3 108 51
Power module 3.4 kVA
Power module 5 kVA
Power module 6.7 kVA
Additional 5kVA battery charge module for expansions
ACCESSORIES FOR BATTERIES
DESCRIPTION
3 108 54
3 108 43
3 108 45
Kit of 4 empty battery slots
Single slot with 5x7,2Ah batteries (installable in multiples of 4)
Single slot with 5x9Ah batteries (installable in multiples of 4)
ADDITIONAL BATTERY CABINETS
DESCRIPTION
3 108 05
3 108 06
3 107 55
3 107 56
3 107 57
3 107 58
3 107 59
3 107 60
3 107 61
3 107 62
3 107 63
3 107 64
3 108 07
3 108 08
3 108 09
3 108 10
3 108 11
Modular battery cabinet (empty) with 16 trays
Modular battery cabinet (empty) with 20 trays
Modular battery cabinet with 4 battery trays (7.2 Ah)
Modular battery cabinet with 4 battery trays (9 Ah)
10kVA battery cabinet for UPS with 20,
94 Ah long life batteries
TRIMOD
Item
3 103 98
3 104 04
3 104 10
3 104 16
3 104 21
3 104 28
General Features
Nominal Power (kVA)
10
15
20
30
40
60
Active power (kW)
9
13,5
18
27
36
54
3,4
5
6,7
5
6,7
6,7
Module Power (kVA)
Technology
System
Modular, expandable and redundant
UPS in a single cabinet
Modular, expandable and
redundant UPS system
Input features
Input voltage
230V 1F+N, 400V 3F+N
400V 3F + Neutral
Input frequency
Input Voltage Range
400V +15%/-20% - 230V +15%/-20%
400V +15%/-20%
‹ 3%
THD Input Current
Compatibility with Power-Supply Units
› 0,99
Input Power Factor
Output features
Output voltage
230V, 400V 3F +N
400V 3F + Neutral
Performance at Full Load
95%
Nominal output frequency
50/60 Hz can be selected by the user ±1 Hz
Crest Factor
1:3,5
±1%
Allowed Overload
100 seconds at 125%, 30 seconds at 150%
Performance in Eco Mode
98%
Bypass
Automatic and maintenance bypass
Batteries
The battery modules are designed to easily be fitted inside the cabinet.
No particular operation is necessary to connect them
Battery Module
Battery Series Type/Voltage
Uptime
VRLA - AGM / 240 Vdc (internal redundant series)
Configurable and expandable both internally and with additional battery cabinets
Battery Charge
Smart Charge technology. 3-stage advanced cycle
Display and Signals
4 rows/20 characters, 4 menu browsing buttons, multi-colour LED status indicator,
alarms and audio signals
Communication Ports
2 RS232 serial ports, 1 Logical gate, 4 ports with dry contacts, 1 slots for interfaces
Emergency Power Off (EPO)
Yes
Remote Management
Available
Physical features
1345 x 414 x 628
Installed Power Modules
3
6
6
Installable Battery Slots
Up to 12
-
-
-
120
130
130
150
5746
8619
Net Weight (kg)
9
Operating Temperature/Humidity
0 - 40 °C / 20 - 80%
IP21
Maximum Audible Noise at 1 m from the Unit (dBA)
Heat Loss (BTU/h)
46
1436
2155
2873
4310
Conformity
Certifications
Standard Warranty
EN 62040-2, EN 62040-3, EN 62040-1
2-year warranty
Services
Installation Can be performed by the user, modular architecture with "plug and play" power and battery modules
Maintenance
Easy to Manage
Can be performed by the user, optional services available from the manufacturer
Advanced diagnostics functions via the display
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
25
MEGALINE
Modular single-phase UPS with double conversion VFI
Pack.
3 108 57
Item
SINGLE CABINET - WITHOUT BATTERIES
3 103 51
3 103 53
3 103 55
3 103 57
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
1250
2500
3750
5000
875
1750
2625
3500
-
1
1
1
1
DOUBLE CABINET - WITHOUT BATTERIES
3 108 62
3 108 63
3 103 60 + 3 108 59
3 103 63 + 3 108 59
3 103 66 + 3 108 59
3 103 69 + 3 108 59
3 103 72 + 3 108 59
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
5000
6250
7500
8250
10000
3500
4375
5250
6125
3500
-
2
2
2
2
2
BATTERY EXPANSIONS
DESCRIPTION
3 108 35
3 103 60 + 3 107 78
Pack.
Item
SINGLE CABINET (German Standard)
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
1250
2500
3750
5000
875
1750
2625
3500
11
11
11
11
1
1
1
1
23,5
34
43
53
3 103 50
3 103 52
3 103 54
3 103 56
3 107 75
3 107 76
3 107 77
3 107 78
3 107 79
3 107 80
3 107 81
3 107 82
3 107 83
3 107 84
Cabinet with 1 kb
Cabinet with 2 kb
Cabinet with 3 kb
Cabinet with 4 kb
Cabinet with 5 kb
Cabinet with 6 kb
Cabinet with 7 kb
Cabinet with 8 kb
Cabinet with 9 kb
Cabinet with 10 kb
DOUBLE CABINET
3 103 60 + 3 107 78
3 103 63 + 3 107 79
3 103 66 + 3 107 80
3 103 69 + 3 107 81
3 103 72 + 3 107 82
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
5000
6250
7500
8250
10000
3500
4375
5250
6125
3500
11
11
11
11
11
2
2
2
2
2
24+50
27+58
29+65
32+73
34+80
SINGLE CABINET (French standard)
3 103 42
3 103 43
3 103 44
3 103 45
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
1250
2500
3750
5000
875
1750
2625
3500
11
11
11
11
1
1
1
1
23,5
34
43
53
SINGLE CABINET (British standard)
3 103 46
3 103 47
3 103 48
3 103 49
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
1250
2500
3750
5000
875
1750
2625
3500
11
11
11
11
1
1
1
1
23,5
34
43
53
BATTERY EXPANSION WITH BATTERY CHARGER
DESCRIPTION
3 107 86
3 107 87
3 107 88
3 107 89
3 107 90
3 107 91
3 107 92
3 107 93
3 107 94
3 107 95
ACCESSORIES
DESCRIPTION
3 108 35
3 108 57
3 108 58
3 108 59
3 108 60
3 108 61
3 108 62
3 108 63
3 107 85
3 109 72
26
Cabinet with 1 kb with battery charger
Power module (PW 1250)
Uptime up-grade single cabinet (kb MegaLine/1)
Uptime up-grade double cabinet (kb MegaLine/2)
Empty battery cabinets
Y cable for connecting second additional battery cabinet
(MegaLine SPLITTER)
Kit with battery cabinet extension for tower configuration
(PL MegaLine cable)
Manual bypass for single cabinet (BP/1)
Manual bypass for double cabinet (BP/2)
Additional battery charger (CB 36)
Relay interface kit
MEGALINE
3 103 42
3 103 46
3 103 50
Item
3 103 43
3 103 47
3 103 52
3 103 44
3 103 48
3 103 54
3 103 45
3 103 49
3 103 56
3 103 60 + 3 103 63 + 3 103 66 + 3 103 69 + 3 103 72 +
3 107 78
3 107 79
3 107 80
3 107 81
3 107 82
Single CABINET
Double CABINET
General Features
Nominal power (VA)
1250
2500
Active power (W)
875
1750
Max expandability (VA)
5000
Max expandability (W)
3500
3750
5000
5000
6250
2625
3500
3500
4375
7500
8750
10000
5250
6125
7000
10000
7000
Technology
On-line double conversion (VFI-111)
UPS architecture
Modular, Expandable, N+X Redundant with 1250 VA power boards in a single cabinet
Input
Input nominal voltage
230 V
Input voltage range
184 V ÷ 264 V at 100% of the load
Minimum network operating voltage
100 V at 50% of the load
THD Input current
‹ 3%
Input Power Factor
› 0.99 from 20% of the load
Input frequency
50 Hz / 60 Hz ± 2% autosensing
Output
Output voltage
230 V ± 1%
Output frequency
50 Hz / 60 Hz synchronised
THD Output voltage
‹ 1% with non-linear load
Waveform
Sinusoidal
Crest Factor
3,5 : 1
Performance when connected to the mains
92% at 100% of the load
Allowed overload
300% for 1 sec. – 200% for 5 sec. – 150% for 30 sec.
Uptime
Uptime with 50% load (min)
20
11
Uptime expandability
Yes
Equipment
Bypass
Static and Electromechanical, automatic and internally synchronised (due to overload or operating fault).
Signals and Alarms
Large 4-line alphanumeric display, multi-colour status indicator, audio signal
Communication Ports
no.1 RS 232 port, no.2 logical gates
UPS Communicator Software
Can be downloaded free of charge (after requesting the activation code)
Electronic protections against overloads, short-circuits and excessive battery discharge.
Operation stops when the uptime ends. In-rush current limiter at start-up.
Protections
Sensor to connect the neutral cable correctly.
Back-feed protection (electrical safety insulation of the input plug during battery-based operation). EPO contact
(complete shutdown in the event of an emergency)
IN/OUT mains connection
Standard German / Clamp connector with universal multiple socket outlet (Italian/German standard)
Mechanical features
Net weight (kg)
23,5
34
43
53
24 + 50
26,5+57,5
475 x 270 x 570
29 + 65
31,5+72,5
34 + 80
2 x 475 x 270 x 570
Installed power boards
1
2
3
4
4
5
6
7
Free power expansion slots
3
2
1
-
4
3
2
1
8
-
Installed battery kits
1
2
3
4
4
5
6
7
8
Free uptime expansion slots
3
2
1
-
6
5
4
3
2
Operating temperature (°C)
0÷40
IP21
Relative humidity (%)
20÷80 non-condensing
Noise level at 1 m (dBA)
‹ 40
Certifications
Standards
EN 62040-1, EN 62040-2, EN 62040-3
Certifications
Standard Warranty
2-year warranty
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
27
MEGALINE RACK
3 103 85
3 107 96
3 108 62
-
3 107 85
3 109 73
Wide input voltage and frequency range
Operational frequency at 50 or 60 Hz with auto-recognition
Frequency conversion 50 in - 60 out or vice versa
Extension of the input frequency range for operation with power-supply units
Operation in eco mode (energy savings)
Operation in load waiting mode (on demand protection)
Adjustable output voltage in 1 volt steps from the front panel
Low noise level
Internal and external temperature measurement
Fan control based on temperature and load
Pre-set for emergency remote shut-off
Pack.
Item
3 103 79
3 103 81
3 103 83
3 103 85
Pack.
RACK (German standard)
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
1250
2500
3750
5000
875
1750
2625
3500
11
11
11
11
1
1
1
1
23,5
34
43
53
WEIGHT
(kg)
Item
3 103 87
3 103 88
3 103 89
3 103 90
3 103 91
3 103 92
UPTIME EXPANSION
NOMINAL POWER
VA
KB
ADDITIONAL
EXPANSION (MIN.)
80% OF THE LOAD
1250
1250
1250
2500
2500
3750
1
2
3
1
2
1
15
30
45
15
17
15
RACK (French standard)
3 103 34
3 103 35
3 103 36
3 103 37
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
1250
2500
3750
5000
875
1750
2625
3500
11
11
11
11
1
1
1
1
23,5
34
43
53
RACK (British standard)
3 103 38
3 103 39
3 103 40
3 103 41
NOMINAL
POWER
VA
ACTIVE
POWER
W
UPTIME
(MIN.) 80%
OF THE LOAD
NO.
CABINET
WEIGHT
(kg)
1250
2500
3750
5000
875
1750
2625
3500
11
11
11
11
1
1
1
1
23,5
34
43
53
28
BATTERY EXPANSIONS FOR UPS RACK
DESCRIPTION
3 107 96
3 107 97
3 107 98
3 107 99
3 108 00
3 108 01
3 108 02
3 108 03
Rack with 1 kb
Rack with 2 kb
Rack with 3 kb
Rack with 4 kb
Rack with 1 kb with battery charger
ACCESSORIES
DESCRIPTION
3 108 35
3 108 04
3 108 62
3 107 85
3 109 72
3 109 73
Power module (PW 1250)
Empty battery rack cabinets
Manual bypass for single cabinet (BP/1)
Additional battery charger (CB 36)
Relay interface kit
Extendable Rack Guides Kit 6U
MEGALINE RACK
3 103 34
3 103 38
3 103 79
3 103 35
3 103 39
3 103 81
3 103 36
3 103 40
3 103 83
Nominal power (VA)
1250
2500
3750
5000
Active power (W)
875
1750
2625
3500
Item
3 103 37
3 103 41
3 103 85
General Features
Max expandability (VA)
5000
Max expandability (W)
3500
Technology
On-line double conversion (VFI-111)
Modular, Expandable, N+X Redundant with 1250 VA power boards
in a single cabinet
UPS architecture
Input
230 V
Input voltage range
184 V ÷ 264 V at 100% of the load
Minimum network operating voltage
100 V at 50% of the load
‹ 3%
THD Input current
› 0.99 from 20% of the load
Input Power Factor
Input frequency
50 Hz / 60 Hz ± 2% autosensing
Output
Output voltage
230 V ± 1%
Output frequency
50 Hz / 60 Hz synchronised
THD Output voltage
‹ 1% with non-linear load
Waveform
Sinusoidal
Crest Factor
3,5 : 1
Performance when connected to the mains
92% at 100% of the load
Allowed overload
300% for 1 sec. – 200% for 5 sec. – 150% for 30 sec.
Uptime
20
11
Uptime expandability
Yes
Equipment
Bypass
Signals and Alarms
Static and Electromechanical, automatic and internally synchronised
(due to overload or operating fault)
Large 4-line alphanumeric display, multi-colour status indicator, acoustic signal
Communication Ports
UPS Communicator Software
no.1 RS 232 port, no.2 logical gates
Can be downloaded free of charge (after requesting the activation code)
Electronic protections against overloads, short-circuits and excessive battery discharge.
Operation stops when the uptime ends. In-rush current limiter at start-up. Sensor to
Protections connect the neutral cable correctly. Back-feed protection (electrical safety insulation of
the input plug during battery-based operation).
EPO contact (complete shutdown in the event of an emergency)
Standard German / Clamp connector with universal multiple socket outlet
IN/OUT mains connection
(Italian/German standard)
Mechanical features
Net weight (kg)
23,5
34
43
53
4
266 x 483 x 582
Installed power boards
1
2
3
Free power expansion slots
3
2
1
-
Installed battery kits
1
2
3
4
Free uptime expansion slots
3
2
1
-
0÷40
IP21
‹ 40
Certifications
Standards
EN 62040-1, EN 62040-2, EN 62040-3
Warranty
Standard Warranty
2-year warranty
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
29
MEGALINE
Table of long uptimes single and double cabinet version
Model
Uptime 80%
of the load
no. cabinet and dimensions
W x H x D (mm)
Codes
1,250 VA
15’
1x (270 x 475 x 570)
3 103 73
1,250 VA
30’
1x (270 x 475 x 570)
3 103 74
1,250 VA
45’
1x (270 x 475 x 570)
3 103 75
3 103 50 + 3 107 76
Power:
Single Cabinet
1,250 VA
60’
2x (270 x 475 x 570)
2,500 VA
15’
1x (270 x 475 x 570)
3 103 76
2,500 VA
30’
2x (270 x 475 x 570)
3 103 52 + 3 107 78
2,500 VA
45’
2x (270 x 475 x 570)
3 103 52 + 3 107 79
2,500 VA
60’
2x (270 x 475 x 570)
3 103 52 + 3 107 81
3,750 VA
15’
1x (270 x 475 x 570)
3 103 77
3,750 VA
30’
2x (270 x 475 x 570)
3 103 54 + 3 107 79
3,750 VA
45’
2x (270 x 475 x 570)
3 103 54 + 3 107 82
3 103 54 + 3 107 84
3,750 VA
60’
2x (270 x 475 x 570)
5,000 VA
15’
2x (270 x 475 x 570)
3 103 56 + 3 107 76
5,000 VA
30’
2x (270 x 475 x 570)
3 103 56 + 3 107 80
5,000 VA
45’
2x (270 x 475 x 570)
3 103 56 + 3 107 84
5,000 VA
60’
3x (270 x 475 x 570)
3 103 56 + 3 107 84+ 3 107 77
Double Cabinet
5,000 VA
15’
2x (270 x 475 x 570)
3 103 60 + 3 107 80
5,000 VA
30’
2x (270 x 475 x 570)
3 103 60 + 3 107 84
5,000 VA
45’
3x (270 x 475 x 570)
3 103 60 + 3 107 84 + 3 107 78
5,000 VA
60’
3x (270 x 475 x 570)
3 103 60 + 3 107 84 + 3 107 81
6,250 VA
15’
2x (270 x 475 x 570)
3 103 63 + 3 107 81
6,250 VA
30’
3x (270 x 475 x 570)
3 103 63 + 3 107 84 + 3 107 76
6,250 VA
45’
3x (270 x 475 x 570)
3 103 63 + 3 107 84 + 3 107 81
6,250 VA
60’
4x (270 x 475 x 570)
3 103 63 + 3 107 84 (x2) + 3 107 76
7,500 VA
15’
2x (270 x 475 x 570)
3 103 66 + 3 107 82
7,500 VA
30’
3x (270 x 475 x 570)
3 103 66 + 3 107 84 + 3 107 79
7,500 VA
45’
3x (270 x 475 x 570)
3 103 66 + 3 107 84 (x2)
7,500 VA
60’
4x (270 x 475 x 570)
3 103 66 + 3 107 84 (x2) + 3 107 80
8,750 VA
15’
2x (270 x 475 x 570)
3 103 69 + 3 107 84
8,750 VA
30’
3x (270 x 475 x 570)
3 103 69 + 3 107 84 + 3 107 81
8,750 VA
45’
4x (270 x 475 x 570)
3 103 69 + 3 107 84 (x2) + 3 107 78
8,750 VA
60’
4x (270 x 475 x 570)
3 103 69 + 3 107 84 (x3)
10,000 VA
15’
3x (270 x 475 x 570)
3 103 72 + 3 107 84 + 3 107 76
10,000 VA
30’
3x (270 x 475 x 570)
3 103 72 + 3 107 84 (x2)
10,000 VA
45’
4x (270 x 475 x 570)
3 103 72 + 3 107 84 (x2) + 3 107 81
10,000 VA
60’
5x (270 x 475 x 570)
3 103 72 + 3 107 84 (x3) + 3 107 78
1 cabinet
W 270mm
30
2 cabinet
W 540mm
3 cabinet
W 810mm
4 cabinet
W 1080mm
5 cabinet
W 1350mm
MEGALINE RACK
Table of long uptimes
Model
Uptime 80%
of the load
no. cabinet and dimensions
W x H x D (mm)
1,250 VA
15’
1 (6U)
3 103 87
1,250 VA
30’
1 (6U)
3 103 88
1,250 VA
45’
1 (6U)
3 103 89
3 103 79 + 3 107 99
Power:
Codes
Rack
1,250 VA
60’
2 (6U + 3U)
2,500 VA
15’
1 (6U)
3 103 90
2,500 VA
30’
2 (6U + 3U)
3 103 81 + 3 107 98
2,500 VA
45’
2 (6U + 3U)
3 103 91 + 3 107 98
2,500 VA
60’
3 (6U + 2x3U)
3 103 81 + 3 107 98 + 3 107 99
3,750 VA
15’
1 (6U)
3 103 92
3,750 VA
30’
2 (6U + 3U)
3 103 92 + 3 107 99
3,750 VA
45’
3 (6U + 2x3U)
3 103 83 + 3 107 99 (x2)
3 103 83 + 3 107 99 (x2) + 3 107 97
3,750 VA
60’
4 (6U + 3x3U)
5,000 VA
15’
2 (6U + 3U)
3 103 85 + 3 107 97
5,000 VA
30’
3 (6U + 2x3U)
3 103 85 + 3 107 97 + 3 107 99
5,000 VA
45’
4 (6U + 3x3U)
3 103 85 + 3 107 97 + 3 107 99 (x2)
5,000 VA
60’
5 (6U + 4x3U)
3 103 85 + 3 107 97 + 3 107 99 (x3)
6U= 483 x 266 x 582
3U= 483 x 133x 584
1 cabinet
H 266mm (6U)
2 cabinet
H 532mm (9U)
3 cabinet
H 798mm (12U)
4 cabinet
H 1064mm (15U)
5 cabinet
H 1330mm (18U)
MODULAR UPS
WWW.UPS.LEGRAND.COM
UPS
31
32
®
UPS
CONVENTIONAL
Daker DK
WHAD
DHEA
Safe, powerful and technological solutions
Double conversion online
UPS equipped with DSP
microprocessor for precise
and constant control of all the
measurements and the power
factor correction circuit (PFC).
Professional solutions with power
that can achieve up to 10 kVA.
Electronics with no-transformer
technology for high quality energy
output with a yield of up to 93%.
CONVENTIONAL UPS
WWW.UPS.LEGRAND.COM
UPS
33
Daker DK
UPS online double
conversion can be used
in both tower and rack
configurations.
CONVENTIONAL
SINGLE PHASE
Using the display it is possible to control all the main system
parameters and the state of the UPS, including the load level,
remaining battery life and failures.
Additional battery cabinets increase the autonomy of group
continuity. A battery charger can be added to each battery cabinet
for fast and secure charging.
tower version with additional battery cabinet
34
®
Three standard dimensions
for power up to 10kVA
Based on requested power and uptime
there are UPS and additional battery
cabinets available with dimensions for
2 to 4 units.
UPS and battery
cabinet for 2 units
UPS and battery cabinet
for 3 units
UPS and battery cabinet
for 4 units
Reversible display
UPS Daker DK can be used in both
tower and 19 inch rack versions thanks
to its reversible display.
CONVENTIONAL UPS
WWW.UPS.LEGRAND.COM
UPS
35
WHAD
UPS on line
double conversion
for application of
small and
medium power.
CONVENTIONAL
SINGLE PHASE
The issued power, 800 VA to 6,000 VA, allows for high level
electrical protection for equipment whose power consumption is
not too high.
The UPS are made of a single board that integrates control power
and logic, control and diagnostics.
Thanks to the reduced footprint and the extended and tight shape,
the WHAD UPS occupy very little space, even if placed on top of a
work station.
Models up to 2500 VA can extend uptime by adding battery
cabinets.
In the most performing version there is a slot for inserting internal
versions of the SNMP communication interfaces.
36
®
DHEA
ENERGY STATION
The double conversion
on line UPS designed
with overlapping
components with quick
connections.
CONVENTIONAL
SINGLE PHASE
The system is made of an inverter section and battery
modules (battery pack) equipped with a PLUG-IN connection
and hot swap system.
Reduces overall dimensions, depth of 185 mm, allows positioning
the uninterruptible power supply in extremely small spaces.
The special hermetically sealed batteries, that do not release any
gas fumes, make it possible to use within home environments.
Load management
The 1500 VA model is equipped with 3
outputs, 2 of them are times for inverter
operation, since they deactivate after a
pre-set interval, they make it possible to
safeguard the power supply of the most
important loads based on available uptime.
Plug-in connection with hot swap system
“Standard” components and quick connections make
it possible for the less expert to transport and install every
element of the system easily and, thanks to the hot swap
system, it is possible to add or replace battery packs at any time,
without shutting off the inverter.
CONVENTIONAL UPS
WWW.UPS.LEGRAND.COM
UPS
37
Daker DK
Conventional UPS - Single-phase On-line double conversion VFI
3 100 54
3 100 50
3 107 71
3 109 53
The display shows the main system parameters and their status, including the battery charge level and malfunctions.
The integrated communication software allows not only controlling the uninterruptable power supply and stopping in case of equipment malfunction, it also allows the user to
remotely test the main functions of the uninterruptable power supply, communicating through SNMP/Internet/network adaptor, accessing uninterruptable power supply unit
functions by way of Internet and also sending the user an SMS if specific events occur.
The optional slot provides additional flexibility for network configuration. There is also a WEB/SNMP board and a relay interface available that are capable of supplying
isolated contacts for application on industrial control panel or remote alarm panels.
The automatic and manual bypass (optional) guarantees continual electrical power supply to critical loads, in case of electronic malfunction, overload, overheating or
programmed maintenance. A maintenance bypass switch box is available.
Pack.
Item
3 100 50
3 100 51
3 100 52
3 100 53
3 100 54
Pack.
CONVERTIBLE UPS WITH BATTERIES
NOMINAL
POWER
VA
POWER
ACTIVE
W
UPTIME
(MIN.) 80%
OF THE LOAD
WEIGHT
(kg)
1000
2000
3000
4500
6000
800
1600
2400
4050
5400
8
8
6,3
6
4
16
29,5
30
60
60
Item
3 109 50
3 109 51
3 109 54
3 109 52
3 109 53
CONVERTIBLE UPS - WITHOUT BATTERIES
3 100 56
3 100 57
3 100 58
NOMINAL
POWER
VA
POWER:
ACTIVE
W
UPTIME
(MIN.) 80%
OF THE LOAD
WEIGHT
(kg)
4500
6000
10000
4050
5400
9000
-
25
25
26
BATTERY CABINET (WITH BATTERIES)
DESCRIPTION
3 107 69
3 107 70
3 107 71
3 107 72
3 107 66
Battery cabinet for 3 100 50 (12 batteries 12V, 7.2 Ah)
Battery cabinet for 3 100 51 (12 batteries 12V, 7.2 Ah)
Battery cabinet for 3 100 52 (12 batteries 12V, 9 Ah)
Battery cabinet for 3 100 56 and 3 100 57 (20 batteries 12V, 7.2 Ah)
Battery cabinet for 3 100 58 (20 batteries 12V, 9 Ah)
BATTERY CABINETS (EMPTY)
DESCRIPTION
3 107 50
3 107 51
3 107 52
3 107 53
3 107 54
Battery cabinet for 3 100 50 (for 12 batteries 12V, 7.2 Ah)
Battery cabinet for 3 100 51 (for 12 batteries 12V, 7.2 Ah)
Battery cabinet for 3 100 52 (for 12 batteries 12V, 9 Ah)
Battery cabinet for 3 100 56 and 3 100 57 (for 20 batteries 12V, 7.2 Ah)
Battery cabinet for 3 100 58 (for 20 batteries 12V, 9 Ah)
38
VARIOUS ACCESSORIES
DESCRIPTION
Additional 200W battery charger
Kit of Rack support brackets
External manual bypass
Daker DK
Item
3 100 50
3 100 51
3 100 52
3 100 53
3 100 56
3 100 54
3 100 57
3 100 58
Nominal power (VA)
1000
2000
3000
4500
6000
10000
Active power (W)
800
1600
2400
4050
5400
9000
General Features
Technology
Waveform
Sinusoidal
UPS architecture
convertible tower and 19 rack
Input
Input voltage
230 V
Input frequency
Input Voltage Range
160V - 288V with full load
THD Input current
‹ 3%
Input power factor
› 0,99
Compatibility with Power-Supply
Units
Output
Output voltage
230V ± 1%
Output frequency (nominal)
50/60 Hz (can be set from the LCD panel) +/- 0.1%
Crest Factor
1:3
THD Output voltage
97%
±1%
Bypass
Automatic and maintenance bypass (OPTIONAL)
Batteries
Uptime Expansion
Number of batteries
yes
3
6
6
20
-
20
-
-
Battery series Type/Voltage
12V 7.2Ah
12V 7.2Ah
12V 9Ah
12V 5Ah
-
12V 5Ah
-
-
8
8
6,3
6
-
4
-
-
Display and Signals
Four buttons and four LEDs to monitor the status of the UPS in real time
Communication Ports
RS232, USB serial ports
Remote Management
available
Network interface slot
SNMP
Mechanical features
440x88 (2U)
x650
440x88 (2U) 440x176 (4U) 440x88 (2U) 440x176 (4U) 440x88 (2U) 440x132 (3U)
x650
x680
x680
x680
x680
x680
Battery Cabinet Dimensions 440x176 (4U) 440x88 (2U)
H x W x D (mm)
x405
x650
440x88 (2U) 440x132 (3U) 440x132 (3U) 440x132 (3U) 440x132 (3U) 440x132 (3U)
x650
x680
x680
x680
x680
x680
Dimensions H x W x D (mm)
Net Weight (kg)
440x88 (2U)
x405
16
29,5
30
52
25
52
25
26
0 ÷ 40
IP21
20÷80 % non-condensing
‹ 50
Heat Loss (BTU/h)
490
654
818
982
1310
1636
Certifications
Standards
EN 62040-1, EN 62040-2, EN 62040-3
Warranty
Standard Warranty
repair or replacement for 2 years
CONVENTIONAL UPS
WWW.UPS.LEGRAND.COM
UPS
39
Daker DK
Table of long uptimes
Model
Power:
1000 VA
2000 VA
3000 VA
Daker DK
4500 VA
6000 VA
10000 VA
Uptime 80%
of the load
no. Cabinet and dimensions
H x W x D (mm)
Item
8'
440 x 88 x 405
3 100 50
75'
440 x 88 x 405 + 440 x176 x 405
3 100 50 + 3 107 69
140'
440 x 88 x 405 + 440x176 x 405 (x2)
3 100 50 + 3 107 69 (x2)
205'
440 x 88 x 405 + 440 x176 x 405 (x3)
3 100 50 + 3 107 69 (x3)
265'
440 x 88 x 405 + 440 x 176 x 405 (x4)
3 100 50 + 3 107 69 (x4)
8'
440 x 88 x 650
3 100 51
45'
440 x 88 x 650 (x2)
3 100 51 + 3 107 70
3 100 51 + 3 107 70 (x2)
75'
440 x 88 x 650 (x3)
120’
440 x 88 x 650 (x4)
3 100 51 + 3 107 70 (x3)
145’'
440 x 88 x 650 (x5)
3 100 51 + 3 107 70 (x4)
6'30"
440 x 88 x 650
3 100 52
30'
440 x 88 x 650 (x2)
3 100 52 + 3 107 71
3 100 52 + 3 107 71 (x2)
65'
440 x 88 x 650 (x3)
100'
440 x 88 x 650 (x4)
3 100 52 + 3 107 71 (x3)
120’
440 x 88 x 650 (x5)
3 100 52 + 3 107 71 (x4)
9'
440 x 88 x 650 + 440 x 132 x 680
3 100 56 + 3 107 72
27'
440 x 88 x 650 + 440 x 132 x 680 (x2)
3 100 56 + 3 107 72 (x2)
50'
440 x 88 x 650 + 440 x 132 x 680 (x3)
3 100 56 + 3 107 72 (x3)
65'
440 x 88 x 650 + 440 x 132 x 680 (x4)
3 100 56 + 3 107 72 (x4)
90'
440 x 88 x 650 + 440 x132 x 680 (x5)
3 100 56 + 3 107 72 (x5)
110'
440 x 88 x 650 + 440 x 132 x 680 (x6)
3 100 56 + 3 107 72 (x6)
3 100 56 + 3 107 72 (x7)
130'
440 x 88 x 650 + 440 x 132 x 680 (x7)
8'30"
440 x 88 x 650 + 440 x 132 x 680
3 100 57 + 3 107 72
25'
440 x 88 x 650 + 440 x 132 x 680 (x2)
3 100 57 + 3 107 72 (x2)
45'
440 x 88 x 650 + 440 x 132 x 680 (x3)
3 100 57 + 3 107 72 (x3)
60'
440 x 88 x 650 + 440x132x680 (x4)
3 100 57 + 3 107 72 (x4)
5'30"
440 x 132 x 650 + 440 x 132 x 680
3 100 58 + 3 107 66
15'30"
440 x132x650 + 440 x 132 x 680 (x2)
3 100 58 + 3 107 66 (x2)
30'
440 x132x650 + 440 x 132 x 680 (x3)
3 100 58 + 3 107 66 (x3)
50'
440 x 132 x 650 + 440 x 132 x 680 (x4)
3 100 58 + 3 107 66 (x4)
1000 VA 2 cabinet
W 2U + 4U
3000 VA 3 cabinet
W 2U +2 U + 2U
6000 VA 2 cabinet
W 2U + 3U
10000 VA 2 cabinet
W 3U + 3U
TOWER
version
1000 VA 2 cabinet
H 6U (264mm)
RACK
version
40
4500 VA 3 cabinet
H 6U (264mm)
6000 VA 2 cabinet
H 5U (320mm)
10000 VA 2 cabinet
H 6U (264mm)
DHEA
Idem
3 101 07
3 101 08
General Features
Nominal Power (VA)
1000
1500
Active Power (W)
700
1050
Technology
on-line double conversion
Waveform
sinusoidal
230 V
Input Voltage
Range
184 V ÷ 265 V at 100% of the load
Minimum network
operating voltage
184V with nominal load / 100V at 50%
of the nominal load
Input frequency
3 101 08
50/60 Hz ± 2% (± 14% in extended range)
Power factor
on input
› 0.99 from 80% of the nominal load
Output voltage
230 V ± 1%
Distortion of output voltage
‹ 1%
Output frequency (battery
operation)
50/60 Hz ± 1%
Batteries
3 107 73
Acoustic noise at 1 m (dBA)
- System that can be combined with a power supply unit to increase uptime in case of
extended black out.
- Battery modules with batteries and related integrated PLUG-IN connections.
- Possibility of adding up to 10 Battery pack.
- Power supply voltage of the inverter only present once the module is connected.
Pack.
Item
NOMINAL POWER
VA
POWER ACTIVE
W
1000
1500
700
1050
‹ 40
Net weight (kg)
4 (inverter) + 16 (battery pack)
Dimensions
(H x W x D) (mm)
309 x 450 x 170 (inverter) 125 x 450 x 170 (battery pack)
Standards
ENERGY STATIONS
3 101 07
3 101 08
EN 62040-1, EN 50091-2, EN 62040-3
External Connections
1 RS 232 + 3 contact outputs (2 poles) + EPO
IP21
Output socket
1 line
3 lines
(2 of them with timer)
Uptime at 100% of the load
no. battery
pack
1000 VA
1500 VA
DESCRIPTION
1
20’
15’
Battery module
2
48’
32’
3
1 h 20’
50’
BATTERY
3 107 73
2 x 36 V 7.2 Ah in overlapping Battery Packs
4
2h
1 h 15’
5
2 h 40’
1 h 35’
6
3 h 20’
2h
7
4h
2 h 30’
8
5h
3h
9
6h
3 h 30’
10
7h
4h
CONVENTIONAL UPS
WWW.UPS.LEGRAND.COM
UPS
41
WHAD
3 100 87
3 100 96
3 101 01
All models are equipped with:
- logical level port that can be connected to a Relay interface Kit.
- slot for inserting internal versions of the SNMP, CS121 SK and CS121B SK communication interfaces.
- possibility of connecting to an external maintenance bypass device, designed to be connected to the input/output connector present on the back of the UPS.
Pack.
Item
3 100 87
3 100 90
3 100 93
3 100 96
3 100 97
3 100 98
3 100 99
3 101 00
3 101 01
UPS WITH STANDARD GERMAN SOCKETS
NOMINAL
POWER
VA
POWER:
ACTIVE
W
UPTIME
(MIN.) 80%
OF THE LOAD
WEIGHT
(kg)
800
1000
1500
2000
2500
3000
4000
5000
6000
560
700
1050
1400
1750
2100
2800
3500
4200
20
15
10
12
8
18
12
13
10
12
12
12
23
23
55
55
65
65
Model
Uptime
Power: (80% of the
load):
3 100 88
3 100 91
3 100 94
3 101 09
3 101 11
800
1000
1500
2000
2500
560
700
1050
1400
1750
UPTIME
(MIN.) 80%
OF THE LOAD
17
13
8
12
8
3 100 89
3 100 92
3 100 95
3 101 10
3 101 12
POWER:
ACTIVE
W
UPTIME
(MIN.) 80%
OF THE LOAD
WEIGHT
(kg)
800
1000
1500
2000
2500
560
700
1050
1400
1750
17
13
8
12
8
12
12
12
23
23
VARIOUS ACCESSORIES
Additional battery cabinet for 800 - 1000 - 1500
Additional battery cabinet for 2000 - 2500
Y cable for connecting two battery cabinets
Manual bypass for 2000VA / 3000VA UPS
Manual bypass for 5000VA / 6000VA UPS
42
170’
88 x 355 x 390 +
160 x 319 x 390 (x2)
3 100 87 + 3 107 74 (x2)
60’
88 x 355 x 390 +
160 x 319 x 390
3 100 90 + 3 107 74
130’
88 x 355 x 390 +
160 x 319 x 390 (x2)
3 100 90 + 3 107 74 (x2)
35’
88 x 355 x 390 +
160 x 319 x 390
3 100 93 + 3 107 74
75’
88 x 355 x 390 +
160 x 319 x 390 (x2)
3 100 93 + 3 107 74 (x2)
45’
460 x 160 x 425 +
160 x 319 x 390
3 100 96 + 3 108 20
75’
460 x 160 x 425 +
2x(160 x 319 x 390)
3 100 96 + 3 108 20 (x2)
32’
460 x 160 x 425 +
160 x 319 x 390
3 100 97 + 3 108 20
50’
460 x 160 x 425+
2x(160 x 319 x 390)
3 100 97 + 3 108 20 (x2)
2500 VA
DESCRIPTION
3 107 74
3 108 20
3 109 71
3 108 62
3 109 77
3 100 87 + 3 107 74
2000 VA
UPS WITH STANDARD ENGLISH SOCKETS
NOMINAL
POWER
VA
88 x 355 x 390 +
160 x 319 x 390
1500 VA
WEIGHT
(kg)
12
12
12
23
23
90’
1000 VA
UPS WITH STANDARD FRENCH SOCKETS
POWER:
ACTIVE
W
Codes
800 VA
Whad
NOMINAL
POWER
VA
Cabinet no.
and dimensions
H X W X D (mm)
WHAD
3 100 87
3 100 88
3 100 89
3 100 90
3 100 91
3 100 92
3 100 93
3 100 94
3 100 95
3 100 96
3 101 09
3 101 10
3 100 97
3 101 11
3 101 12
3 100 98
3 100 99
3 101 00
3 101 01
Nominal power (VA)
800
1000
1500
2000
2500
3000
4000
5000
6000
Active power (W)
560
700
1050
1400
1750
2100
2800
3500
4200
Item
General Features
Technology
Waveform
Sinusoidal
UPS architecture
Conventional UPS systems with expandable uptime
Input
Input voltage
230 V
Input frequency
Input Voltage Range
184V÷265V at 100% of the load
THD Input current
3%
Input power factor
› 0,99
Output
Output voltage
230V ± 1%
Output frequency (nominal)
50/60 Hz synchronised
Crest Factor
3,5 : 1
THD Output voltage
1%
Allowed Overload
Bypass
300% for 1 sec., 200% for 5 sec., 150% for 30 sec.
Electromechanical, automatic and internally synchronised (due to overload or operating fault)
Batteries
Uptime Expansion
Sì
Battery series Type/Voltage
VRLA - AGM 48Vdc
20
15
VRLA - AGM 36Vdc
10
12
8
VRLA - AGM 144Vdc
18
VRLA - AGM 192Vdc
12
13
10
Display and Signals
Indicatore di stato multicolore a LED, allarmi e segnalazioni acustiche
Communication Ports
1 RS232 serial port
1 logical level port
1 RS232 serial port
Remote Management
1 RS232 serial port, 1 logical level port,
1 slot for network interface connection
(CS121)
UPS Communicator free to download software
Mechanical features
355 x 88 x 390
460 x 160 x 425
Battery Cabinet Dimensions (H x W x D) (mm)
319 x 160 x 402
319 x 160 x 402
12
23
Net Weight (kg)
475 x 270 x 570
319 x 160 x 402
55
65
0÷40
IP21
‹ 40
Heat Loss (BTU/h)
150
190
‹ 42
287
380
‹ 40
478
570
760
952
1140
Standards
EN 62040-1, EN 62040-2, EN 62040-3
Warranty
Standard Warranty
2 years
CONVENTIONAL UPS
WWW.UPS.LEGRAND.COM
UPS
43
44
®
UPS
LINE INTERACTIVE
Niky
Niky S
Simple, reliable and economical solutions
Small dimensions,
easy to install
and configure.
Equipped with electronic
stabiliser, signal LED and
telephone protection ensure total
and reliable system protection.
Offering a high quality/price
ratio guaranteeing
a safe investment
over time.
UPS LINE INTERACTIVE
WWW.UPS.LEGRAND.COM
UPS
45
Ideal protection
for all applications
such as
Small-Office
Home-Office.
Niky
line interactive
46
They represent the offer with the best quality/price ratio
for the safety of data within the office, your own business
and the home PC.
Equipped with CPU control, integrated AVR and interface
for intelligent communication, ensuring optimal protection
management.
Advanced management of battery discharge
AVR stabiliser
Integrated self-diagnostic function
Cold start-up function
Intelligent microprocessor control
RS232 or USB interface for managing the UPS
MODEM/LAN telephone protection
®
Niky S
line interactive
Sinusoidal output
Control using intelligent microprocessor
MODEM/LAN telephone protection
RS-232 and USB interface for managing the UPS
Cold start-up function
Protection from voltage peaks
Self-test function for the Uninterruptable power unit
Intelligent battery management
Protection from overload and short-circuit
Excellent voltage adjustment
WWW.UPS.LEGRAND.COM
UPS
47
Niky
UPS Line Interactive - Single-phase VI
3 100 00
3 100 02
3 100 09
Item
3 100 01
3 100 03
3 100 10
3 100 01
3 100 04
3 100 13
3 100 05
3 100 14
General Features
Nominal power (VA)
600
800
1000
1500
Active power (W)
300
400
600
900
Technology
Line-interactive VI
Waveform
Pseudo-Sinusoidal
Input
3 100 00
Input voltage
3 100 13
230 V
Input frequency
Pack.
Item
UPS WITH STANDARD GERMAN OUTPUT SOCKETS
NOMINAL
POWER
VA
POWER:
ACTIVE
W
UPTIME
(MIN.)
NO. OF
SOCKETS
IEC
600
800
300
400
5÷30
5÷30
1
1
3 100 00
3 100 01
PORTS
NO. OF SOCKETS
FOR
STANDARD
COMMUNICATION
GERMAN
1
1
50-60 Hz
Input Voltage Range
160V-290V
Output voltage
230V ± 10%
Output
USB
USB
Output frequency
(nominal)
50/60 Hz +/-1%
‹ 3% with linear load
THD Output voltage
UPS WITH STANDARD GERMAN OUTPUT SOCKETS
+ IEC SOCKET
NOMINAL
POWER
VA
POWER:
ACTIVE
W
UPTIME
(MIN.)
600
800
1000
1500
300
400
600
900
5÷30
5÷30
5÷30
5÷30
3 100 09
3 100 10
3 100 13
3 100 14
NO. OF
SOCKETS
IEC
1
1
2
2
Batteries
PORTS
NO. OF SOCKETS
FOR
STANDARD
COMMUNICATION
GERMAN
1
1
2
2
USB
USB
RS232
RS232
UPS WITH MULTIPLE IEC OUTPUT SOCKETS
NOMINAL
POWER
VA
POWER:
ACTIVE
W
UPTIME
(MIN.)
NO. OF
SOCKETS
IEC
600
800
1000
1500
300
400
600
900
5÷30
5÷30
5÷30
5÷30
3
3
6
6
3 100 02
3 100 03
3 100 04
3 100 05
PORTS
NO. OF SOCKETS
FOR
STANDARD
COMMUNICATION
GERMAN
-
USB
USB
USB
USB
Number of batteries
1
1
2
2
Battery series Type/
Voltage
12V, 7Ah
12V, 9Ah
12V, 7Ah
12V, 9Ah
Configuration and Management
One push button and
2 LED to monitor UPS
status in real-time.
Display and Signals
One push button and
4 LED to monitor UPS
status in real-time
Telephone protection
RJ11/RJ45
Remote Management
available
Mechanical Features
Dimensions
H x W x D (mm)
171x95x349
Net Weight (kg)
7
239x147x354
7,5
13
16
Environmental Conditions
Operating
temperature (°C)
0 ÷ 40°C
‹40
Certifications
Standards
EN62040-1, EN62040-2, EN62040-3
Warranty
Standard Warranty
2 years
600-800 VA
IN
OUT
1000-1500 VA
SITE WIRING
FAULT
RS232
SITE WIRING
FAULT
USB
IN
SITE WIRING FAULT
AC INPUT
48
AC OUTPUT
SITE WIRING FAULT
AC INPUT
AC OUTPUT
OUT
RS232
USB
IN
OUT
Niky S
UPS Line Interactive - Single-phase VI-SS
Item
3 100 06
3 100 20
3 100 07
3 100 08
Nominal power (VA)
1000
1500
2000
3000
Active power (W)
600
900
1200
1800
General Features
Technology
Line-interactive VI-SS
Waveform
Sinusoidal
Input
Input voltage
230 V ± 12% on network ± 5% on battery
Input frequency
Item
3 100 06
3 100 20
3 100 07
3 100 08
Input Voltage Range
160V-290V
Output voltage
230V ± 10%
Output
3 100 06
Pack.
50-60 Hz
Output frequency
(nominal)
UPS
NOMINAL
POWER
VA
POWER:
ACTIVE
W
UPTIME
(MIN.) 80%
OF THE LOAD
PORTS
FOR
COMMUNICATION
1000
1500
2000
3000
600
900
1200
1800
9
9
9
9
USB-RS232
USB-RS232
USB-RS232
USB-RS232
50/60 Hz +/-0.2%
‹ 3% with linear load
THD Output voltage
Batteries
Uptime Expansion
Yes
Number of batteries
Type/Voltage
battery series
2
2
4
4
12V, 7Ah
12V, 9Ah
12V, 7Ah
12V, 9Ah
Configuration and Management
Three buttons and three LEDs to monitor
the status of the UPS in real time
Display and Signals
Telephone protection
RJ11/RJ45
Remote Management
available
Mechanical Features
Dimensions
H x W x D (mm)
242x169x361
Net Weight (kg)
13
242x169x464
15
22
24
Environmental Conditions
Operating
temperature (°C)
0 ÷ 40°C
‹40
Certifications
Standards
EN62040-1, EN62040-2, EN62040-3
Warranty
Standard Warranty
2 years
1000-1500-2000 VA
IN
OUT
USB
RS232
3000 VA
IN
OUT
USB
RS232
WWW.UPS.LEGRAND.COM
UPS
49
50
®
ACCESSORIES
COMMUNICATION
UPS management and control systems
Network interface, enables
remote control of the UPS
which can be connected to the
network.
Sensors for monitoring
temperature and humidity
of the environment.
Communication and supervision
software that allows
accessing UPS operational data,
executing complete
diagnostics and configuring
special functions.
ACCESSORIES COMMUNICATION
WWW.UPS.LEGRAND.COM
UPS
51
ACCESSORIES
Network interface
RS232
3 108 84
3 109 06
UPS
3 108 82
3 109 07
A
B
The network interface for UPS management does not require external software. There
is a a 32 bit internal processor with a proprietary operating system that can continously
monitor UPS operation and handle multiple events (no power, overload, bypass,
anomaly, ...); as a result, it executes the following actions:
• Saving log files complete with date and time
• Saving the trend of the main operational data complete with date and time
• Sending e-mail
• Executing scheduled actions
• Displaying pop-up messages, carrying out a shutdown and customised commands
on remote computers (it is necessary for these computers to have the RCCMD
software)
• Shutting off and turning on the UPS
• Sending “Wake on LAN (WOL) Magic Packet” signals
• Support for the SNMP protocol and the main management software (HP OpenView,
IBM Tivoli, etc…)
• Sending SNMP trap messages
• Displaying data and configuration through internet browser (Internet Explorer,
Mozilla Firefox, Opera, etc…) or Telnet
• Firmware can be updated through specific software package that can be downloaded
from the Internet for free
• Ethernet connection 10/100Mbit Base-T (half-duplex and full-duplex) with autorecognition function
• DHCP Function
• 1 RCCMD license included
C
>
<
<
<
>
Fire alarm systems
Air-conditioning units
Smoke sensors
Relay IN
Relay OUT
<>
<>
<>
<>
<>
Terminal Configuration
Pipe-Through RS232
MODBUS over RS232 / RS485
Temperature Sensors
Sensor Manager
MODBUS over IP
HTTP / java / UPSMON
Execution of remote programs
SNMP management, SNMP Trap
Sending e-mail (SMTP)
Telnet, FTP, setup / update
Log File, Historical Data File
Available in the internal and external versions, the internal version is housed in a
dedicated UPS slot.
Power supply voltage 9 - 30 V d.c. (power supply included in the external versions).
Professional and industrial versions include programmable digital contacts and
additional RS232 / RS485 communication ports.
Model
Items
NETWORK INTERFACE
DESCRIPTION
CS121 SK
CS121B SK
CS121
CS121B
CS121M
CS121M SK
3 108 81
3 108 82
3 108 83
3 108 84
3 109 06
3 109 07
PROFESSIONAL network interface internal version (slot)
STANDARD network interface internal version (slot)
PROFESSIONAL network interface external version
STANDARD network interface external version
INDUSTRIAL network interface external version
INDUSTRIAL network interface internal version (slot)
SHUTDOWN / COMMANDS /MESSAGES
- Unix / Linux + RCCMD agent
- Windows + RCCMD agent
- MAC OS X + RCCMD agent
- AS/400 + RCCMD agent
- Novell NetWare + RCCMD agent
- VMware + RCCMD agent
- Citrix + RCCMD agent
Model
CS121B
A
X
C
CS121B
X
CS121B SK
X
CS121
X
X
X
CS121 SK
X
X
X
CS121M
X
X*
X
CS121M SK
X
X*
X
*only modbus over RS485.
52
B
ACCESSORIES
Sensors and various accessories
3 109 00
3 108 98
TCP/IP
3 108 99
Model
3 109 02
Items
3 109 03
LAN/WAN
COM 2
COM 1
SENSORS
DESCRIPTION
SM_T_COM
3 108 97
SM_T_H_COM
3 108 98 Combined temperature and humidity sensor for direct connection
to COM2 for CS121, CS121 SK and SiteSwitch 4 interfaces
(only the SS4 model).
Cannot be used with the SensorManager.
SensorManager
SM_T
3 108 99 Manager for environmental sensors: it connects to COM2 of
CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4 model)
and manages up to 8 analogue inputs, 4 digital inputs and 4
digital outputs.
Configuration is managed directly from CS121 interfaces
(PROFESSIONAL and INDUSTRIAL versions) previously described.
“Scale Divisor” and “Off set” configuration functions allow using
the SensorManager with any analogue apparatus (see features).
Includes 1 temperature sensor “SM_T”.
3 109 00 Temperature sensor can be used exclusively with
SensorManager.
Allows connecting another “SM_T” sensor using the specific
connector.
SM_T_H
3 109 01
UPS
Temperature sensor for direct connection to COM2 of the
CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4
model). It cannot be used with the SensorManager.
Combined temperature and humidity sensor can be used
exclusively with SensorManager.
Door sensor
3 109 02
It is made of a reed tube switch and a magnet.
Compatible with CS121, CS121 SK, CS121 M, CS121M SK, and
SensorManager.
SM_flash
3 109 03
Flashing light signal.
Exclusively compatible with SensorManager.
15 V D.C.
Smoke sensors
Fire alarm system command
Temperature and/or humidity sensors
Conditioning system malfunctioning sensor
“Custom” analogue and digital sensors
Intrusion sensors
SENSOR MANAGER TECHNICAL FEATURES
Power supply voltage (Vd.c.)
9-24
Temperature (°C)
0 ÷ 40
Humidity % non condensing
10 ÷ 80
Analogue Inputs (V)
0 ÷ 10
Digital inputs (V)
9 ÷ 24
Digital outputs V (10mA)
9 ÷ 24
Dimensions (WxDxH) (mm)
70 X 126 X 30
SENSOR TECHNICAL FEATURES
Power supply
voltage Vd.c.
Temperature
range (°C)
PAI0018
PAI0032
PAI0021
PAI0020
9÷15*
9÷15*
9÷24**
9÷24**
0 ÷ +100
0 ÷ +100
-25÷+100 -25÷+100
Relative
humidity % (+- 5%)
Connection cable m
(included)
0 ÷ 100
1,8
Dimensions
H x W x D (mm)
1,8
0 ÷ 100
5
5
27 X 70 X 70
* directed by network interface
** directed by SensorManager
WWW.UPS.LEGRAND.COM
UPS
53
ACCESSORIES
Load management control unit (SiteSwitch)
SS4
3 109 04
It is a device used to control energy distribution and it allows shutting down and turning
on devices connected to it individually thanks to the four independent power supply.
When without power, for example, a UPS can send a command to shut off less important
loads (such as laser printers) in order to ensure the greatest possible uptime to the
most critical systems. Once network power has been restored, the same UPS can send
the command to turn on these loads.
In the front part there are 5 LEDs that allow verifying the status of the main power
supply and every output.
Brackets that allow installation inside the 19” rack cabinet are included.
SiteSwitch 4 is available in two versions: SS4 and SS4 AUX.
Model
Items
It is the most performing version, inside there is a network card installed that
receives, through TCP/IP, the controls sent by the CS121 network interface
(any model) that manages the UPS.
This allows installing SiteSwitch near the loads to be powered and allows a
UPS to control a potentially infinite number of control units.
The presence of a CS121 SK network interface inside the SS4 also guarantees
autonomous operation, i.e. without
receiving commands from a UPS: from the WEB interface it is possible to send
commands to the computer (through the RCCMD software),
program switch on and shut off, sending e-mail and managing environmental
sensors.
It is compatible with the SNMP protocol.
SITESWITCH 4
DESCRIPTION
SS4
SS4 AUX
3 109 04
3 109 05
RS232
High performance load management control unit
STANDARD load management control unit
LAN
Any network interface
SS4 AUX
It represents the standard solution, it must be guided by a professional, or
INDUSTRIAL, type interface installed in the UPS. The ideal solution if installed
near the UPS (for example inside the same rack cabinet) a however within 15
metres.
control cable
RS232
Professional
or industrial network
interface
TECHNICAL FEATURES
Type
SS4
230 V / 16 A
SS4 AUX
230 V / 16 A
4 x (230 V / 8A max)
4 x (230 V / 8A max)
Internal / CS121
(all models)
CS121
(PROFESSIONAL
and INDUSTRIAL
versions)
Type of connection
for management
of output sockets
Ethernet
10/100 Mbit/s
RJ111 Cable
approximately 5 m
(included)
Dimensions H x W x D
(mm)
60 x 260 x 180
60 x 260 x 180
Power supply voltage
Output socket
Management of output
sockets
54
ACCESSORIES
Management software
Example of types of management and communication achieved through
software and hardware
LOCAL PROTECTION
Allows protecting a single user (pc or server) that must be positioned at a
distance of less than 12 metres.
Model
Items
RS232
SOFTWARE
DESCRIPTION
UPS
Communicator
UPS
management
software
3 108 79
UPS
management
software
3 108 80 Software made of a system of applications designed to
continually control UPS operation and guarantee the integrity
of the operating systems of the computers powered by
the actual UPS. To be completed with agent for executing
commands on remote computers (RCCMD), includes RS232/
USB converter.
AS/400
USB
downloadable*. Software made of a system of applications designed to
of the operating systems of the computers powered by the
actual UPS. Complete of agent for executing commands on
remote computers (RS System)
Software made of a system of applications designed to
of the operating systems of the computers powered by the
actual UPS.
To be completed with agent for executing commands on
remote computers (RCCMD).
3 109 08 Kit for connecting with AS/400 systems.
Kit made of a connection cable and a cd-rom with instruction
manual.
RCCMD
Software that enables a computer to receive and execute, using
the TCP/IP protocol, all remote commands sent by the UPS
management system.
A RCCMD license is necessary for each computer to be controlled.
Only the licenses are supplied: the software can be downloaded
from the internet (after requesting the activation code).
RCCMD
RCCMD
RCCMD
RCCMD
RCCMD
RCCMD
UNMS
3 108 85
3 108 86
3 108 87
3 108 88
3 108 89
3 108 90
Multi OS RCCMD License
Packet with 5 multi OS RCCMD licenses
RCCMD license for AS/400 (minimum release: V5R3M0)
It is a “WEB based” application capable of continually
monitoring, through the UPS management systems and the
TCP/IP protocol, the state of all UPS.
UNMS
UNMS
UNMS
UNMS
UNMS
UNMS
3 108 91
3 108 92
3 108 93
3 108 94
3 108 95
3 108 96
UNMS license for 25 UPS
UPS Communicator
or UPS management
software
EXTENDED LOCAL PROTECTION
Allows protecting a greater number of users (pc or server) but all depending
on the COMPUTER controlling the UPS.
LAN
USB
UPS Comunicator
or
UPS management
software
RS system agent
or
RCCMD agent
PROTECTION THROUGH TCP/IP NETWORK
Allows controlling multiple users that can interact with the network card.
Management of the entire system can be monitoring and controlled by each
user.
RCCMD agent
RS232
LAN
RCCMD agent
Any
network
interface
RCCMD agent
CENTRALISED PROTECTION
Through the UNMS monitoring software it is possible to control all UPS
connected to a TCP/IP network.
RS232
Any
network
interface
LAN/WAN
UNMS
RS232
Any
network interface
* after requesting the activation code.
WWW.UPS.LEGRAND.COM
UPS
55
Services
for the
customer
56
Reliability
Excellence
Specificity
LEGRAND guarantees their
customers the highest levels
of product and service
reliability. Quality, efficiency
and innovation are the strong
points of the entire LEGRAND
UPS Services range.
A team of competent and
professional specialists
are available to satisfy
diverse technical and sales
requirements of the customer,
in a quick and efficient manner
in order to reduce machine
down time.
The needs of each individual
customer are at the centre
of the UPS Services offer.
LEGRAND offers customised
“Programmed Maintenance”
support, with customised
service plans,
with predefined license fees.
UPS PowerCall
UPS PowerCall is a monitoring and remote diagnostics system
that guarantees continual UPS checking, thanks to a 24 / 7, 365
days a year connection with the operating control room.
The PowerCall service ensures daily support, real time remote
diagnostics and quick on-site intervention, in case of anomalies.
During normal operation:
The UPS sends data to the operating control room, information
is gathered, recorded and evaluated by a team of experts.
Operational data is made available in a report that is periodically
sent to customers.
In case of anomaly, there are 3 different solutions, according to the
seriousness level:
Event recording.
Remote problem resolution.
Sending a technician on-site.
In case of emergency:
The technical department is responsible for the customer request
in real time. The customer is immediately contacted to verify the
conditions of the UPS.
A specialised technician goes on-site to repair the breakdown.
Warranty Formulas
There are two warranty formulas available to satisfy customer needs.
EXCHANGE FORMULA
Includes complete product replacement in case of breakdown or
malfunction. After the anomaly has been discovered, the technical
department sends the customer a module with the instructions
necessary to replace the uninterruptable power supply.
ON-SITE FORMULA
Includes technician assistance and repair at the site where the
product has been installed.
In the standard on-site Formula, the intervention is foreseen within
three work days after the call, two for MT series UPS.
The customer can choose a customised Formula if wanting to reduce
intervention time even further.
Pre and Post
Sales Services
DESIGN CONSULTING
Support for designing systems with UPS, conforming to current
regulations. Definition of the most suitable solution based on
customer needs.
CONFIGURATION AND SIZING
Verification of application requirements in order to protect and
identify the most appropriate UPS.
SYSTEM ANALYSIS
Detection of total system consumption trends and applications to
be protected.
WARRANTY MANAGEMENT
Dedicated technical personnel and specialised services for
standard products and warranty hotline.
INSTALLATIONS
Installation and commissioning on-site.
PREVENTIVE MAINTENANCE
Periodical maintenance in order to safeguard UPS reliability over
time and to prevent possible malfunctions or anomalies.
REMOTE MANAGEMENT
Remote management, real time diagnostics and automatic
activation of repair services.
BATTERY REPLACEMENT
“Turn-key” replacement of battery packs.
HW UPGRADES
Upgrade of hardware power and uptime,
for modular UPS.
SERVIZI FOR THE CUSTOMER
WWW.UPS.LEGRAND.COM
UPS
57
NOTES
58
AD-EXLG/UPS12C/GB - 06/2012
World Headquarters and
International Department
87045 Limoges Cedex - France
☎ : + 33 (0) 5 55 06 87 87
Fax : + 33 (0) 5 55 06 74 55

UPS - enermax24.de

Transcription

Similar documents

UPS WEB/SNMP MANAGER CS121 Series