Original - Ballew Saw and Tool

Transcription

CALL TOLL FREE TO ORDER 1 (800) 288-7483
573
STATIONARY MACHINES
Original
Tool Company
KREG
Ballew Saw & Tool, Inc.
325 South Kimbrough Ave. | Springfield, MO | 65806
1 (800) 288-7483
574 STATIONARY MACHINES
DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
KREG Tool
DK1100 Pro Series Single-Spindle
Machines
True Production Machines. Our DK1100 single-spindle machines are fully-automatic
production pocket hole machines. Designed to run in the most demanding high-volume
production environments, they are built with true industrial quality motors that provide
the power, precision and reliability to get the job done. This series is available in three
models. Our most popular is the DK1100 FE electric version that runs on single phase
110V power, shown at right. We also offer the same performance in two entirely pneumatic powered models. The DK1100 TP is compact and can be built into a workbench as
shown below, while the DK1100 FP is identical to the DK1100 TP but housed in a freestanding cabinet.
DK1100 FE - Electric
DK1100 FP - Pneumatic
Demo Available
$3075.00 DK1100 TP - Tabletop
$2870.00
$3075.00
Call for your delivered price.
Fast. Quiet. Reliable.
Production Pocket-Hole Standard.
Specifications:
Mount the all Pneumatic DK1100 TP
flush with your tabletop.
-5 year Limited Warranty
-1 Second Cycle Time
-DKDB Drill Bit (3/8” Shank, 1/2” Long)
-4” Material Clamping Capacity
-Hole Centering Capability: 1/2” to 11/2” material
Features of the Kreg Pocket Hole
Our drilled pocket hole has distinct advantages compared to a
routed pocket hole. First, our pocket hole is much shorter and
easier to hide on the backside of a workpiece. Secondly, in the
case where you cannot hide the hole, you can plug our roundsided hole with either a wood or plastic plug. A routed hole is
much larger, harder to hide, and is not pluggable.
Our pocket hole features a flat shoulder and perfectly centered guide hole made by our one-piece step bit. This flat step
allows the use of pocket hole screws with the washer style
head which works much better than a screw with a small head
in softer material such as particle board or pine. A routed
pocket hole does not work well with the washer style head because the curved bottom of a routed hole prevents the washer
style head from fully seating.
www.ballewsaw.com
DK1100 FE
The screw in a routed pocket hole is angled at 6 degrees. At 6
degrees, it is harder to fully engage the screw with the driver
bit, which leads to the chance that the bit will "jump" out. At 6
degrees, the driver is also lying on the wood. At 15 degrees
there is plenty of room for a driver to clear the wood and to
fully engage the screw with the driver bit.
The only advantage claimed for a pocket hole using a 6 degree
angle is less joint shift. The key word is less. Less joint shift is
not the same as no joint shift. If you want a perfectly flush joint
you have to clamp when assembling whether the screw angle is
6 degrees or 15 degrees. When clamped, both screw angles produce perfectly flush joints.
jack@ballewsaw.com
Fax: 1 (417) 865-3797
575
KREG Tool DK3100ProSeries Multi-Spindle
Face Frames Twice as Fast! Our DK3100 multi-spindle machine has the ability to drill two
pocket holes in one machine cycle. The great thing is that you do not have to sacrifice any
machine flexibility to gain this speed advantage. The DK3100 actually has three fixed spindles built-in. Simply place drill bits in any two of the spindles. The multiple spindles give
you the option of three different hole spacings to fit today’s most common face frame
widths. If you would prefer to drill only one pocket hole, no problem, just remove a drill bit
and you get the equivalent of our DK1100 single-spindle machine. Only Kreg offers you the
option of one or two pocket holes and your choice of three different on-center hole spacings
IN THE SAME MACHINE!
The Same Face-Frames. Twice as Fast.
DK3100
Demo Available
Adjustable
The Kreg Pocket Hole Machine Advantage
Quick
Durable
Quiet
Unlike other drilling machines,
Kreg machines use a hardened
steel drill guide that supports the
drill bit all the way into the
workpiece, prolonging drill bit
life and improving the cut
quality of the pocket hole.
No need to bring your
earplugs! Kreg machine are the
quietest on the market. Everyone in the shop will appreciate
that!
Whether you’re working with 1/2”
material or 2x4s, we’ve got the machine to handle it. All Kreg Pockethole Machines are easy to adjust for
specific stock in just a few seconds.
Lift-off top and simple allen
wrench drill collets make changing
between hole spacings a breeze.
Fast
Cycle times of 2 seconds or
less and we have machines
that drill up to 5 holes per
cycle. Fast, efficient and built
for high-speed production.
$3,970.00
Repeatable
Kreg machines feature unique material positioning "swing-stops" that allow pocket
holes to be easily repeated in the same location across cabinet rails. The "swing
drops" can be bypassed when drilling a
panel by simply pushing the panel into
them to swing them out of the way.
Don’t let bit changes slow you
down! All of our machines
feature a simple and straightforward design which lets you
switch bits in 60 seconds or
less. Time IS money after all.
Reliable
All Kreg pocket hole machines are
TRUE production machines featuring
high-quality industrial motors that are
built to run all day, every day, in high
production environments. Our unique
design minimizes the stress on moving
parts and eliminates failure prone parts.
1 (800) 288-7483
One Machine Cycle. 5 Pocket-Holes.
KREG Tool
DK5100 Pro Series
Panel Boring Machines
Panel Drilling Power. New to the market, our multi-spindle pocket hole machines
drill up to five pocket holes in one machine cycle. The DK5100 contains 5 separate
drill motors mounted 6" on-center. Each pneumatic drill motor can be individually
actuated for the ability to drill one, two, three, four, or five pocket holes at one time.
The ability to individually actuate any one of the drill spindles along with the 6" oncenter option makes these machines perfect for drilling pocket holes in panels to
make cabinet sides, floors, walls, and even drawer box components.
DK5100 - 5 Spindles, 6" on-center $9345.00
Specifications for this tool are listed on
page 154.
Specifications:
- Pneumatic Motor
- DKDB Drill Bits
- 2 Second Cycle Time
- 5 Year Limited Warranty
- 1-3/4” Material Clamping Capacity
- On-Center Spindle-Spacings - 6”
Demo Available
Foreman DB110/DB55
The Small Shop Solution! The Foreman is the perfect machine for the woodworker that craves the speed and efficiency of our fully automatic DK series machines, but at a much lower price. Operating the Foreman couldn’t be easier. Just
pull the handle and you’re drilling production style pocket holes in less than a second!
Choose from electric or pneumatic power. Both models are designed to be fast,
quiet, and reliable. The electric model (DB110) is perfect for the serious hobbyist
or for use on the job site since it runs on 110V electricity and requires no compressed air. The pneumatic model (DB55) is the machine of choice for the small
production shop.
DB110/DB55
Demo Available
Single-Step Pocket-Holes.
A Small Shop’s Dream.
$795.00
Specifications:
- Pneumatic/Electric Motor
- DKDB Drill Bits
- 1 Second Cycle Time
- 7” Table Height
- 1-1/2” Material Clamping
Capacity
- Swing Stop Technology
www.ballewsaw.com
Hardened steel drill guide
cuts extremely clean pocket
holes.
Swing-stops easily position
material for repetitive holes.
jack@ballewsaw.com
Fast, quiet and simple
production pocket holes.
Fax: 1 (417) 865-3797
577
KREG Tool
Face Framing Table
Assemble Frames with Ease. Assembling perfectly flush
face-frames is a breeze with our pneumatic Face-Framing
Table. Assembly is quick, and since the flush assembly reduces and often eliminates the need for sanding, you’ll save
even more time and money. Best of all, the Framing Table
stands at a 30 degree angle, so it uses less floor space than a
flat table and saves your back by allowing you to work upright rather than hunched over.
Demo
Available
KFT4X8
Save Time.
Save Your Back.
BBaacc$3075.00
kk..
Specifications:
- 30-degrees for vertical
- 4 Individual Clamping Cylinders
- 1-1/1” Thick
- 76” High
- 110” Wide
- Screw Gun not included
Clamp joint and drive screw with optional screw gun.
Each cylinder can be actuated individually or all at
once with a master switch.
1 (800) 288-7483
all
Precision Stop and Trak Systems
KREG Tool
No Tape Measure. No Pencil.
Just Precision.
Cutting wood with accuracy is an important part of making sure
the project turns out just right. The inaccuracy of pencil marks
on a board can then be compounded by the need to follow that
mark precisely with the saw blade. Our Precision Trak and
Stop Kit is designed to take the guesswork out of cutting wood
to length.. A ½” self-adhesive tape is then applied to the top of
the fence. Finally, slide the Flipstop and Production Stop onto
the top of the trak and you have a precision cutting station that
eliminates the need for a tape measure and pencil. Simply place
the precision lens cursor over the board length desired, press the
board against the stop, and cut away! Precise, repeatable cuts
could not be any easier.
- Fence: Aircraft Grade Aluminum - Cutting Capacity: 96”
- Finish: Anodized for easy clean-up
- Length: (4) 2’ sections for 8’ of Trak Length
Accessories
Uniquely designed to flip out
of the way when workpieces
are pressed into its face.
and
justa
Self
Fen
Production Stop
Standard Flipstop
KMS7801
$124.00
KMS8000
Specifications:
Features dual lens cursors and the
unique ability to be quickly moved
to either side of the saw.
$29.99
KMS7800
$22.99
KMS7831
Easily attached to a Flipstop or Production Stop,
$19.99
the Miter Attachment supports the mitered end of
the board on two surfaces to makes a more accurate cut. Perfect
for Picture Framers
"Perfect Miter" Attachment
Track Components
Top Trak
A
Self-aligning L-shaped mounting foot.
A. KMS7712
2’ Length
$21.99
B. KMS7714
4’ Length
Heavy Duty Trak
$34.99
Perfect for heavy use commercial applications.
C. KMS7702*
2’ Length
$39.99
D. KMS7704
4’ Length
$59.99
Imperial Self Adhesive Tape
1/2” wide, 12’ long metallic measuring tape.
E. KMS7724 Tape (12’ L-R reading)
$7.49
F. KMS7723 Tape (12’ R-L reading)
$7.49
Metric 3.5 Meter Self-Adhesive Tape
Metric option of Kreg’s scuff-resistant metallic tape.
G. KMS7728 * Tape (R-L Reading)
$7.49
H. KMS7729 Tape (L-R Reading)
$7.49
LIMITED TO STOCK
ON HAND!
*
*DISCONTINUED
www.ballewsaw.com
B
C
K
E F
G H
D
Adjustable Miter Trak
I. KMS7402*
I
J
M
L
Clever miter slot positioning on the router table.
42” Miter Trak
$24.99
Jig and Fixture Bar
J. KMS7303
Mini Trak
Perfect for building workshop jigs and fixtures.
Jig and Fixture Bar (30”)
$23.99
Used to produce countless types of wood shop jigs and fixtures
K. KMS7509
Mini Trak (48” length with 4’ tape)
$18.99
L. KMS7727*
Additional 4’ Non-Adhesive Tape
$4.99
Trak Clamp
J. KMS7511
Inexpensive and versatile, great in a variety of applications.
Trak Clamp
$5.99
ODUC
Bal
jack@ballewsaw.com
Fax: 1 (417) 865-3797
nc.
96”
579
Precision Router Table
KREG Tool
After an extensive design and development process, we’re very proud to announce the launch of our newest product, the Kreg Precision Router Table.
Coming off the success of our Precision Measuring product line, our customers
wanted us to bring the same precision and accuracy we had brought to their tablesaw and band saw, to their router table. Through a series of ground-breaking
new features, including the innovative self-squaring t-square style fence, the
fully enclosed tubular aluminum extrusion, and the steel-strut reinforced MDF
top with its Easy-Slide™ Micro-Dot skin, just to name a few… the table is set
to make a real name for itself in the industry. It’s a new age in routing equipment, and we’re excited to be leading the way. Please read on, and discover all
of the new features for yourself.
PRS1040
Dual Reducing Rings
(2” and 1-13/64”) offer three adjustable points of contact (pictured on left).
Self-squaring T-Square Style
Fence designs keep the fence
permanently parallel to the miter
slot (pictured on right).
Specifications:
- Full-enclosed aluminum fence
- Precision Lens Cursor
- Doubles as a Vertical Jointer
- Easy-Slide Micro-Dot Skin
Precision Routing Accessories
Parts
True-Flex Featherboard and Twin-Pack
Precision Router
Table Insert Plate
- Rugged 3/8” phenolic
- Insert Plate Size
(9-1/4” x 11-3/4” x 3/8”)
- 3/4" corner radius
- Exclusive Bottom-up
mounting design
PRS1020
$179.99
Precision Router
Table Fence
- Micro-Adjuster Compatible
- Fully Independent Fence Faces
for use as a Vertical Jointer
- Full-Length Vacuum Chamber
- Cam-Style Lock Down
PRS3010
PRS3020
Carefully designed fingers apply optimum pressure. Includes Wedgelock™ Hardware for miter slot and
t-slot compatibility. Extremely
durable plastic composite body.
$19.99
Single Featherboard
$36.99
Featherboard Twin-Pack
Precision Router Table Insert Plate Levellers
8 adjustable points of contact. Four-corner
lock-downs. Locating tabs for easy installation. Designed for 3/4" corner radius. Works
with router tables up to 1 - 1/2" thick.
PRS1010
$199.99
Universal Steel Stand
- Heavy Gauge Steel Construction
- 31” to 36” Height Adjustability
- 4 Stable Leveling Feet
- Durable Painted Finish
- Fast and Easy Assembly
$ 499.99
PRS3040
$149.99
$19.99
Micro-Adjuster
Dial-in precise adjustments to your
KREG Band Saw Fence. with our
Precision Micro-Adjuster.
KMS7215
KRS1030
4 Levellers
$15.99
Heavy-Duty Casters
Add true mobility to your Universal Steel
Stand. Includes 4 Heavy-Duty casters.
Dual-locking mechanism protects against
caster roll and pivot.
PRS3090
4 Casters
$59.99
ERW
3797
1 (800) 288-7483
all
KREG Tool
Precision Benchtop Router Table
Benchtop Portability.
Floor-Standing Features.
Built from the ground-up as the portable solution to true precision routing, this table provides trimcarpenters and other mobile professionals
with the quality materials and attention to detail that they’re only used to
finding in large router tables. It features the same high pressure laminate
Micro-Dot MDF surface as our top-of-the-line Precision Router Table, a
full-size Phenolic insert plate, and an innovative rigid steel base which believe it or not - actually tests quieter than enclosed portable router tables. Why put up with
‘portable’ features
when you can have the
real thing?
PRS2100
$ 229.99
Specifications:
- Phenolic Insert Plate
- 16” x 24” x 1” Surface
- 24” Fence Length
- Built-in Jointer
- Aircraft Grade Aluminum - Easy-Slide Micro-Dot MDF
- Anodized for Easy Cleanup
Light yet durable, portable
yet full-featured, the perfect
solution for anyone working on the road.
Precision Miter Gauge
Amazing Precision.
Right out of the box.
Cut perfect miters consistently with our Precision Miter Gauge. A number of unique features makes this one of the most precise miter gauges on
the market today. Factory calibrated accuracy starts with a gauge head that
is machined on a computerized milling machine for absolute precision. An
easy-to-read Vernier scale enables precise angle adjustments up to 1/10th
of a degree. Five patented bar adjusters take up the play in the miter slot
for a perfect fit.
A
Specifications:
B
A
B
KMS7102 Precision Miter Gauge System $ 139.99
The gauge head contains pre-drilled holes for
the most common angles cut. O, 10, 22-1/2, 30, and
45 degrees.
Stop pin is tapered and easily drops into positive
stop setting.
- Factory Calibrated
- Weight: 6.5 lbs.
- 24” Fence Included
- Vernier Scale
- Aircraft Grade Aluminum
- Flipstop Included
- Anodized for Easy Cleanup - 5 Bar Adjusters
KMS7101
Precision
Miter Gauge
Only
$ 98.95
ODUC
Bal
www.ballewsaw.com
jack@ballewsaw.com
Fax: 1 (417) 865-3797
nc.
581
Precision Band Saw Fence
KREG Tool
Beat Blade Drift.
True Band Saw Precision.
Introduce a new level of accuracy to your band saw with our Precision
Band Saw Fence. We've designed this fence with noted band saw expert
Mark Duginske to produce an unprecedented level of rigidity, adjustability,
and precision. The fence is adjustable in two dimensions for ease in setting
it parallel to the blade. Cutting accuracy and repeatability is further enhanced by the precision lens curser that reads off of the
included scale. Mounts to most 14 inch band saws
A Adjustable in Two Dimensions.
right out of the box including Jet, Delta, General, GrizParallel to the blade or blade drift
zly, and many others. Available with an optional
angle. Perpendicular to the table.
Micro-Adjuster and Resaw Guide that allows drift
B Precision Lens Cursor
angle adjustments to made on the fly while cutting.
A
Magnified and easy-to-read.
KMS7200
B
MD
9.99
$ 107.00
Specifications:
- 2 Simple Blade Drift Adjustments
- 18” Aircraft Grade Aluminum Fence
- Anodized Finish for Easy Cleanup
- 26” Long Mounting Rail
Bench Klamps
Available in 3” and 6”
reach, works with stock
up to 6” thick.
A
Klamp Plate
Add a clamping station to almost anywhere with this tool.
B
Klamp Blocks
C
5-piece kit provides the easiest
way to align and center your
bench on the joint line.
D
Heavy-Duty Bench
Klamp System
Includes a 10”x10”x1/4”
zinc coated steel plate,
Bench Klamp, Mounting
hardware, and rubber feet.
ERW
Klamp System Components
Work with your clamps. Not around them.
Instead of being restrained to clamping in very specific places, Klamp
System™ components let you work wherever you need to most. Utilizing a simple technology called Inter-Lok™, the Bench Klamps™,
available in two sizes. Add a Klamp Trak™ to the edge of your workbench or add a Klamp Plate™ to the center of your workbench, and
start clamping where you’ve never been able to before. The easiest way
to quickly bring your project into alignment and center your Bench
Klamp on the joint with Kreg Jig
Klamp Blocks. For working on the road , the Heavy-Duty Klamp
System is perfect. It includes a 10”x10”x1/4” zinc-coated steel plate,
Bench Klamp, mounting hardware, and rubber feet.
A
-B
---
C
D
ITEM
DESCRIPTION
PRICE
KKS-BK
3” reach Bench Klamp
$31.49
KKS-KLRBK 6” reach Bench Klamp
New
$36.99
$36.99
KBK-IP
Klamp (Insert) Plate
$12.99
KKS1020
33-3/4” Klamp Trak (clamping plane)
$44.99
KKS-KBKSYS Bench Klamp, Klamp Plate, Inter-Lok bolt,
$41.99
clamp pad, and mounting hardware
KKS-KLBKSYS Zinc Coated Steel Plate, Bench Klamp,
$64.99
KKS1030
--:Not Pictured
mounting hardware, and rubber feet
5-Piece Block Set, mounting hardware
$14.99
3797
1 (800) 288-7483
all
KREG Tool
Clamping Systems
dd
oE
Right Angle Clamp
90-Degree Clamping made Easy
Our Right Angle Clamp helps to align workpieces in 90 degree registration.
The clamp is designed with a 3/8" steel pin on one arm that fits down into the
pocket hole and anchors the workpiece firmly against the second workpiece to be
joined. The opposite arm is fitted with a 180 swiveling pad that automatically adjusts to
your material dimensions. Finish the joint by driving a screw into the adjacent pocket
hole. Also great for assembling all types of box joints.
KHC-RAC
$ 28.99
Specifications:
- Swivel Pad
- Ultra-Wide Reach
- Holds Materials at a perfect
90-degree angle
reg
ke
90-Degree Corner Clamp
Self-Squaring Joints, Quick and Easy.
• Self-Squaring Design makes it easy to square and secure individual
joints,every time!
• Quick-Adjust Handle lets you make fast and easy adjustments for varying
stock thicknesses up to 1-1/4”.
• Innovative Swivel Head and quick release lever improve ease-of-use and
efficiency.
• Large Clamping Surface protects soft woods against workpiece imprint.
• Durable Heat Treated Steel construction features nickel plating for additional longevity.
Face Clamps
Perfectly Flush Pocket-Screw Joints, in no time.
Our line of Face Clamps helps to ensure a perfectly flush joint every
time. Without clamping, the joint can mis-align if the screw follows the
grain of the wood. To use, place the large pad of the clamp directly over
the center of the joint line on the face side of the workpiece(opposite the
pocket holes), clamp with moderate pressure and drive a screw. Three
sizes are available; KHC-PREMIUM - 3-1/4” reach, KHC-LARGE - 6”
reach and KHC-XLARGE -10” reach.
A
B
C
KHC-PREMIUM
KHC-LARGE
KHC-XLARGE
ITEM
2-3/4
5
6
THICKNESS
3
6
10
REACH
$22.99
$31.99
$41.99
KHC-90DCC
$ 36.99
B
A
PRICE
C
or F
raw
ODUC
Bal
www.ballewsaw.com
jack@ballewsaw.com
Fax: 1 (417) 865-3797
nc.
583
Other Kreg Jig Tools
Add Safety.
To Every Tool in Your Shop.
Multi-Purpose Push Stick
The Kreg Multi-Purpose Push Stick adds more than just safety to your
woodshop. With features such as a built-in storage magnet, pencil holder,
and removable locking depth gauge, the Multi-Purpose Push Stick adds
true speed and convenience to every cut you make!
KMA1000
$17.99
Specifications:
- Thin Design for use with Small Stock
- Built-in Pencil Holder
- Built-in Depth Gauge
- Balanced and Ergonomic Design
- Powerful Magnet for Versatile Storage
Kreg Jig Drawer Slide Mounting Tools
Take the guesswork out of mounting drawer slides.
Magnetic Drawer Slide Mounting Tool
DISCONTINUED, LIMITED TO STOCK ON HAND!!
Whether you're building production cabinets or just a single set for your
home or shop, this drawer slide mounting tool will greatly simplify the
process of positioning your slides accurately to assure smooth gliding drawer
movement. This tool uses the intersection of the cabinet stile and rail in face
frame cabinets, and the cabinet side in frameless cabinets as a reference point
from which to position a slide perfectly parallel to the drawer opening. Simply place a metallic drawer slide into position on the base of the tool, (magnets hold the slide in place) align the tool where the stile and rail meet as
shown at left, and drive the screws. Perfect
alignment every time! Patent Pending.
NZ03
$ 29.99
Extension Drawer Slide Mounting Brackets
DISCONTINUED, LIMITED TO STOCK ON HAND!!
For Full-Extension Slides Use the Kreg Jig
Drawer Slide Mounting Brackets.
Once you have your full-extension slides mounted into the cabinet, aligning the drawer box to the slides becomes the next challenge. Our mounting brackets are designed to make this process simple with either framed
or frameless cabinets. Simply clamp a bracket under each slide, set the
drawer box into the drawer opening
so it balances on the brackets. Pull
the slide to the front of the drawer
box and secure it into position by
driving a screw. Drawer box
installation could not be easier.
NZ03-B
$ 9.99
ERW
3797
1 (800) 288-7483
Klamp Table/ Steel Stand
Combo
KREG Tool
all
You don’t need an army of clamps to get the job done; you
just need the right ones. Our Klamp Table™ is the ultimate ‘helping hand’ around the workshop and the easiest
way to get perfectly flush Pocket-Screw Joints, one after
another. Includes: Table, Trak, 2 Bench Klamps,5 Klamp
Blocks and Universal Steel Stand.
Versatile Clamping
Are you always looking for the right clamp? The
Bench clamp with Inter-Lok Technology, is great
for almost any woodworking task. It slides across
the Klamp Trak, rotates 360 degrees, and firmly
locks into place wherever you need it most.
Flexible Positioning
KKS2000
Specifications:
- 21-3/4” x 33-3/4” Clamp Surface
- Glue Resistant Melamine Surface
- Klamp Blocks allow for fast, accurate,
and consistent registration for workpieces.
Klamp Tabletop
KKS1000
Specifications:
Stop working around your clamps and start working with them. The Klamp Trak allows you to position your Bench Klamp and Klamp Blocks
anywhere along the table’s edge, and quickly remove them to regain your flat work surface.
$ 399.99
Precise Alignment
Made from durable, impact resistant plastic,
Klamp Blocksglide along the Klamp Trak allowing
you to quickly register stock to the edge of your
work space, and bring your entire project into
alignment
Includes:
- Klamp Tabletop
- Universal Steel
Stand
$ 249.99
- 21-3/4” x 33-3/4” Clamp Surface
- Glue Resistant Melamine Surface
- Klamp Blocks allow for fast,
accurate, and consistent registration for workpieces.
Drilling, routing, sawing and sanding...
Whatever you’re doing, the klamp Table
can help make it faster and easier.
ODUC
Bal
www.ballewsaw.com
jack@ballewsaw.com
Fax: 1 (417) 865-3797
a
m
585
Universal Steel Stand
nc.
KREG Tool
ne;
he
eas
ne a
Kla
St
The perfect foundation for all Kreg Table Top solutions. Includes 4
leveling feet and assembly hardware. Made from heavy-gauge steel and
adjustable from 31" to 36" in height.
KRS1030
Specifications:
- Heavy Gauge Steel Construction
- 31" to 36" Height Adjustability
- 4-Stable Leveling Feet
- Durable Painted Finish
- Fast and Easy Assembly
he
eat
cros
mly
Perfect Pocket-Screw Joints.
Every Time.
If you’ve ever struggled to get your
Pocket-Screw Joints to come out perfectly straight and flush, the Klamp Table
is an invaluable addition to your
collection. While the two Bench Klamps
secure each joint, the 5 individual
Klamp Blocks allow you to quickly register your workpieces to the edge of the
table, center the Bench Klamp along the
joint line, and bring your entire project
into alignment.
ork
po
re-
win
ur
...
le
$ 149.99
NE
W
Build your own.
Each Klamp System component can be purchased separately. Whether you need a seamless clamping
plane down the edge of your current workbench or a stationary clamping station in the center of your
sawhorse, you can pick the perfect Klamp System component, and install it yourself.
Router Table Switch
Add safety and convenience to your Precision Router Table with this incredibly
handy power switch. Features compatibility with our Precision Router Table and
Precision Benchtop Router Table.
PRS3100
Specifications:
$ 34.99
- Key-Lok eliminates unintentional power on.
- Controls 2 independent devices at once.
- 8-foot power cord
- 15 amp - 20 volts
Router Table Stop
The sleek design of the Kreg Precision Router
Table Stop adds precision and repeatability to
your router table and flips completely out of
the way when not in use. Mounts directly
onto your Kreg Precision Router table.
PRS7850
$24.99
Specifications:
- Flips out of the way when not in use.
- Low-profile Design
- Durable, Aluminum Body
ERW
3797
1 (800) 288-7483
WILLIAMS & HUSSEY
MODEL 154CE
ONLY $2,195
STRAIGHT
APPLICATION
SHOWN
OPTIONAL VARI-FEED
SHOWN WITH
OPTIONAL MOBILE
BASE.
ALL MOLDER SPECS
Machine Base
Guide System
Arbor RPMs
Max. Profile Depth
Min. Stock Length
Max. Profile Width
Min. Stock Thickness
Max. Height Above Final Cut
Max. Stock Thickness
Planes
Overall Machine Dimensions
Working Height
Package Weight
www.ballewsaw.com
jack@ballewsaw.com
MODELS 154CE, 206, 209
Steel Construction with levelers
28”L x 22”W x 33”H
22”L x 11 ¾”W x ½”H, HDPE
6900 (154CE & 206), 6960 (209)
¾”
9”
6 ¾”
¼”
3
⁄16”
7”
7” Wide
28”L x 22”W x 50”H
35”
218 lbs
Fax: 1 (417) 865-3797
ELLIPTICAL
APPLICATIO
N SHOWN
587
WILLIAMS & HUSSEY
MODEL 206
ONLY $2,795
SHOWN WITH
OPTIONAL
ELLIPTICAL JIG.
INDIVIDUAL
MOLDER SPECS
MODEL 154CE
MODEL 206
MODEL 209
Feed Type
Knife Motor
Voltage
Phase
11 fpm, constant feed
2 HP (3450 rpm)
240V
1
0-19 fpm, variable feed
2 HP (3450 rpm)
240V
1 or 3
0-19 fpm, variable feed
1 ½” HP (3480 rpm)
115V (20 amp required)
1
1 (800) 288-7483
WILLIAMS & HUSSEY
RADIUS
APPLICATION
SHOWN
MODEL 209
ONLY $2,795
20 AMP CIRCUIT
REQUIRED
6’ EXTENSION
CORD.
SHOWN WITH
OPTIONAL MOBILE
FREQUENTLY
ASKED QUESTIONS
HOW DO I MAKE CONSTANT
RADIUS MOLDINGS (ARCHES)?
W&H molders are designed to “cut” the profile into millable
stock. For constant radius moldings you will need to make
radius stock and matching guides. A router or bandsaw can
be used to form the stock and guides.
I RUN A LOT OF STOCK, IS THIS
MOLDER A PRODUCTION MACHINE?
Our molders are capable of running large quantities of stock
day after day. Customers have referred to their molder as
a workhorse, because they have run thousands of feet of
molding through their molder.
WHY WOULD I WANT THE VARI-FEED
OVER THE CONSTANT FEED MACHINE?
The vari-feed gives you more versatility. Different species
of wood may cause problems with chip out, tear and other
similar problems. The ability to vary the feed rate will
minimize these problems.
CAN THE MOLDERS PERFORM STRAIGHT,
CONSTANT RADIUS & ELLIPTICAL
MOLDINGS? Yes. All three models can perform straight
and constant radius moldings. Add the elliptical jig to any
molder to produce elliptical moldings, such as an oval or
eyebrow shape. These shapes deviate from on radius to
another requiring the elliptical jig.
www.ballewsaw.com
jack@ballewsaw.com
Fax: 1 (417) 865-3797
589
WILLIAMS & HUSSEY VARI-FEED KITS
Our vari-feed kits give you the ability to vary the infeed roller speed from
0-19 fpm. The vari-feed kit will give you the opportunity to customize your
feed setting to the work you are doing. It allows you to reduce the load on
the motor while creating less stress on your stock. Higher rates of feed let
you quickly run small profiles and casing reliefs.
The vari-feed kits are designed to fit on older W&H models; W7, W7PF,
W7S, Original, 154 and 154CE Molders.
VF-104-K Shown
Item # VF-104-K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $775.00
Consists of a AC/DC control, vari-feed motor assembly,
chains, sprockets and hardware. Your existing control will no
longer be needed; this control will be used to start and stop
both vari-feed and knife motors.
Item # VF-106-K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $585.00
Consists of a DC control, vari-feed motor assembly, control
mounting bracket, chains, sprockets and hardware. Your
existing control will be used to start and stop both vari-feed
and knife motors.
Item # VF-105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62.00
Optional – 6’ Extension Cord for Vari-Feeds
VF-106-K Shown
MULTI-PASS KIT
The longer springs and modified swing arm allow you to make
cuts up to 3/16” above the finish cut height. Now you can raise
the finish knife for a first cut on deep and/or wide profiles. This
eliminates the need for a separate first cut knife or a dado cut
on your saw, saving you time and money while providing you
with a safe operation.
The multi-pass kits are designed to fit on older W&H models;
W7, W7PF, W7S, Original and 154 molders.
Note: As of March 2005 our multi-pass system became a
standard feature on all molders. Not sure if your machine has
multi-pass? Call us with your serial # and we can assist you.
Item # MP-06-Yellow-K. . . . . . . . . . . . . . . . . . . . .$99.00
Recommended for short runs, single passes and
profiles with soft edges
Item # MP-06-Green-K . . . . . . . . . . . . . . . . . . . . . $99.00
Recommended for long runs, multiple passes
and profiles with sharp edges
CHIP EXTRACTOR &
HEAD ASSEMBLY
Upgrade your W&H Molder Chip Deflector to the NEW Chip Extractor &
Head Assembly. Replace the old cast iron & sheet metal with a Linear
Low Density Polyethylene (LLDPE) Chip Extractor. Designed for better
chip flow and completely covers knife area.
Assembly includes: Head, Chip Extractor, (2) Arbor Bearings, (4 of each)
pressure screws, pressure springs, spring guides & check nuts.
Item # 54-520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $350.00
1 (800) 288-7483
WILLIAMS & HUSSEY
ELLIPTICAL JIG
Our elliptical jig can be attached to any of our molders. Looking
for more than a standard arch cut? Attach the jig to produce
elliptical moldings of architectural sizes to span doors and
windows. Our jig is made with high grade steel, black oxided and
built to last!
Item # EJ-92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $525.00
FEED ROLL KITS
Our polyurethane feed roll kits are available in “soft” 60 durometer
and a “durable” 70 durometer. The yellow feed roll kit is commonly
used for single pass applications. The green feed roll kit is
commonly used for multiple pass applications. Choose the
durometer that best fits your application use.
The kit includes 2 rollers, 4 axles to hold the rolls in and 1 tube of
thread locker.
Item # P-123-K (2 yellow) . . . . . . . . . . . . . . . . . . . . . . . . . $99.00
Recommended for short runs, single passes and
profiles with soft edges
Item # P-170-K (2 green). . . . . . . . . . . . . . . . . . . . . . . . . . $99.00
Recommended for long runs, multiple passes and
profiles with sharp edges
GS-2-1 GUIDE SYSTEM
The GS-2-1 guide system increases your working surface and
protects knives that may cut below stock thickness. Profiles such
as crown bottoms, half rounds, quarter rounds and screen molds
may cut below stock thickness.
The GS-2-1 guide system includes a 22” long, ½” thick HDPE, high
density polyethylene millable material. The material is extremely
tough and wear resistant with a low friction surface. The sub plate
attaches directly to the bed of the molder with two screws. A flex
guide, straight guide, adjusting handles and hardware are also
included. The flex guide is beveled providing a wide entry for stock.
NOTE: Molder beds that do not have screw holes to attach the GS2-1 will need to be modified. Item # GS-02 has instructions and the
hardware needed to drill holes in the molder bed.
Item # GS-2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 99.00
Item # GS-02 (hardware bag for drilling holes)�� $ 10.00
www.ballewsaw.com
jack@ballewsaw.com
Fax: 1 (417) 865-3797
WILLIAMS & HUSSEY
591
STAND (Stationary)
Our molder stand is constructed from all steel and has been
designed for easy assembly. Based on customer feed back
the stand was redesigned in 2009 to be lighter, higher and
more compact without sacrificing the strength and durability of
our former stand. A motor lock was also added to prevent any
unwanted movement while running stock. The angled leg design
and padded levelers keep it secure to the floor for stability.
NOTE: If purchasing a stand to go with your existing molder, a
45” Powertwist Belt is required.
Add an optional mobile base for easy movement within your
shop! See Mobile Base below.
Item # 54-402 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $325.00
Item # 54-404 45” Red Powertwist Belt. . . . . . . . . . . . . $ 34.00
MOBILE BASE
Move your Williams & Hussey molder with ease with a rugged
steel mobile base from Rockler. The 800 lb weight capacity and
5” urethane locking casters give you the ability to move your
machine with little effort. The base provides you with adjustability
from 18”x 18” to 28”x 28”. Assembly required.
Item # 54-400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $190.00
SHAPER HEADS
(For Extrema, Weinig, Wadkin, SCMI, Mikron,
US Concepts and other Molders)
Now you can use your Williams & Hussey knives on a molder or
shaper using one of these heads. Holes in knives must be able
to accept 3/8” bolts – 4” heads made with a 1 1/4” bore and a
23° cutting angle. Heads with larger bores can be quoted on
request.
Item #
Length
Diameter
Price
WH-404. . . . . . . . 4” . . . . . . . . . . 4”. . . . . . . . . . . . . . . . $295.00
WH-406. . . . . . . . 6” . . . . . . . . . . 4”. . . . . . . . . . . . . . . . $340.00
WH-404 Shown
1 (800) 288-7483
WILLIAMS & HUSSEY
CONTROLS
Our custom controls are built for
professional use, day in and day out.
They are designed to improve production
and optimize efficiency, be reliable and
maintenance free.
Controls & motors have to be rated
the same phase & voltage. Our
representatives will be able to assist you
in this process if necessary.
54-417 Shown
Item #
Description
Model
54-421
54-413
54-417
54-420
VF-35
Single Phase, 115V, AC/DC
Single Phase, 240V, AC
Single Phase, 240V, AC/DC
Three Phase, 240V, AC/DC
Single Phase, 240V, DC
209
154CE
206
206
VF Kits
Molder
Control
Vari-Feed
Control
Price
US $




−
−
−
−
435.00
139.00
413.00
413.00
225.00
−

54-413 Shown
2 HP Shown
KNIFE MOTORS
Our knife motors are designed with a high
quality torque. They are constructed to
operate with reduced vibration, minimal
noise level and operate at maximum
efficiency. The sturdy construction
offers longer durability and minimum
maintenance.
VF-1 Shown
VARI-FEED MOTOR
Designed for demanding applications,
higher performance, and higher standard
of reliability. They operate quietly over the
full range of speed. They are designed
for longer more efficient life.
Item # Description
Model
54-429 1 ½ HP, Single Phase 209
54-430 2 HP, Single Phase
154CE,206
Knife Vari-Feed Price
Motor
Motor
US $
−
210.00

54-431 2 HP, Three Phase


−
−
315.00
315.00
VF-1
−

274.00
206
206,209,
1/17 HP, Single Phase
VF Kits
www.ballewsaw.com
jack@ballewsaw.com
Fax: 1 (417) 865-3797

Original - Ballew Saw and Tool

Transcription

Similar documents

Which Kreg Jig® is right for me?

PH Brochure 11-2006.indd - Chesapeake Woodworkers Sales

Kreg - Maverick Hardware

technician shirt

Kreg Catalog Volume 22 6-28.indd

Kreg Jig K4 Master System Kreg Jig K5

End-matchEr - Stiles Machinery

Pobierz dodatek - English Matters

Portable Clamping System

Here

Guru Suggested Asymmetrical Layouts copy (5)

tumi corporate collection

Catalog PDF - Kreg Tool