DMD Configurator - WS

User Manual
DMD Configurator
SCHAEFER GmbH | Winterlinger Straße 4 | 72488 Sigmaringen | Germany
Telefon +49 7571 722-0 | Telefax +49 7571 722-98 | info@ws-schaefer.de | www.ws-schaefer.de
SCHAEFER GmbH
Winterlinger Str. 4
72488 Sigmaringen
Germany
Phone +49 7571 722-0
Fax +49 7571 722-99
info@ws-schaefer.de
www.ws-schaefer.de
Support
If you have any questions regarding this product please contact:
Phone +49 7571 722-51
Fax +49 7571 722-99
info@ws-schaefer.de
Copyright
Duplication (copy, print, microfilm or any other form) as well as electronic spreading of this document
is only permitted after formal written consent of SCHAEFER GmbH.
SCHAEFER GmbH reserves the right to carry out alterations of technical details without prior notice.
For all transactions our General Conditions of Sale and Delivery shall be applicable.
All rights reserved.
Ress.
Revision
: 010960
: 2007-02-01
© SCHAEFER GmbH
2
DMD Configurator
1
2
3
Installation DMD Configurator
4
Step 1: Insert CD
4
Step 2: Starting Installation
4
Step 3: Open setup assistant
5
Step 4: Enter the customer information
5
Step 5: Select an installation file
6
Step 6: Activate installation
6
Step 7: Complete Installation
7
Step 8: Start hardware update assistant
7
DMD Configurator
11
Step 1: Create a new configuration
11
Step 2: Open the configuration assistant
11
Step 3: Transfer the configuration
12
Step 4: Test the configuration
13
Trouble shooting – What to do, if...
14
3.1 Incorrect start of the installation
14
3.2 Wrong version of MS .NET Framework
14
3.3 No hardware found
14
3.4 Configuration not effective
15
© SCHAEFER GmbH
DMD Configurator
3
1 Installation DMD Configurator
Minimum system requirements of the PC:
-
MS Windows 2000 SP4 or MS Windows XP SP2
MS .NET Framework 2.0
Hard disk min 10 MB
Min. 256 MB RAM
Resolution min. 1024 x 768
CD- ROM drive
DMD PC- Interface
Administration rights
Optional:
-
Internet access
Step 1: Insert CD
Log on as administrator in your Windows system.
(The installation can only be successfully completed with administration rights!)
Insert CD:
-
The installation program runs automatically (AutoPlay)
or
Windows Explorer: start the installation manually (CD-Start.exe).
Step 2: Starting Installation
Actuate the button ‚DMD Configurator installieren’.
© SCHAEFER GmbH
4
DMD Configurator
Step 3: Open setup assistant
Installation starts.
Confirm with ‚Weiter’.
Step 4: Enter the customer information
Please inscribe your name, your organisation as well as the serial number.
After this approve with ‚Weiter’.
(The serial number is to be found on the back side of the installation CD!)
© SCHAEFER GmbH
DMD Configurator
5
Step 5: Select an installation file
Please select an installation file and confirm with ‚Weiter’.
Step 6: Activate installation
After confirming with ‚Weiter’, the installation will be launched.
© SCHAEFER GmbH
6
DMD Configurator
Step 7: Complete Installation
The installation was completed. Please confirm with ‚Schließen’.
Step 8: Start hardware update assistant
Now connect the PC-interface with your PC (only connect the USB cable).
The PC should detect the PC-interface and update the driver. Then, the hardware
update assistant opens up and installs automatically the driver. The CD contains the
driver in file ‚driver’.
The following installation is depending on Windows version and language.
Please select „Nein, diesmal nicht“ and confirm with ‚Weiter’.
© SCHAEFER GmbH
DMD Configurator
7
Please select ‚Software von einer Liste oder bestimmten Quelle installieren’.
Approve with ‚Weiter’.
Please select „Folgende Quelle ebenfalls durchsuchen“. Please indicate the path of
the installation CD / driver as source and confirm with ‚Weiter’.
© SCHAEFER GmbH
8
DMD Configurator
Please select „Usb2Dll device“ and confirm with ‚Weiter’.
Confirm this window by actuating ‚Installation fortsetzen’.
© SCHAEFER GmbH
DMD Configurator
9
For completing the installation, please actuate ‚Fertig stellen’.
Connect the interface with the delivered power supply.
The administrator rights are not needed anymore.
© SCHAEFER GmbH
10
DMD Configurator
2 DMD Configurator
Step 1: Create a new configuration
Please start the DMD Configurator.
In order to create a new configuration, please actuate the icon for ‚New’ or select
File/New in the menu bar.
Step 2: Open the configuration assistant
A configuration window with an assistant opens up. In only 5 steps leads you the
assistant through the complete configuration.
© SCHAEFER GmbH
DMD Configurator
11
The configuration will be indicated on the user interface after closing the assistant.
All settings can be edited afterwards via this user interface. (Please have a look at
the attached program help for description of special settings / extended settings.)
Step 3: Transfer the configuration
In order to transfer the configuration to the indicator, connect the latter with the USB
PC-interface and select Edit/Send Config. in the menu.
© SCHAEFER GmbH
12
DMD Configurator
Now another window opens up. Confirm this window by actuating ‚Send’.
The window closes automatically after a successful transmission of the configuration.
Step 4: Test the configuration
In order to test the display, open Edit/Test Config. in the menu bar.
Another window opens up.
The coding of the display can be simulated by means of this window. Settings such
as polarity, coding and special texts are taken over from the configuration.
© SCHAEFER GmbH
DMD Configurator
13
3 Trouble shooting – What to do, if...
3.1
Incorrect start of the installation
The installation program does not start
You have no administration rights. In this case, please refer to your administrator.
Should this not be the cause of the error, maybe the AutoPlay of the CD-ROM drive
is not activated. Therefore, please start the installation manually in the Windows
Explorer (CD_Start.exe).
3.2
Wrong version of MS .NET Framework
The installation program reports error ‚Falsche Version von MS .NET Framework’:
The cause for this error is the faulty installation of MS .NET Framework or the
installation of the wrong language package. We recommend a complete new
installation of MS .NET Framework 2.0 or download of the latest MS .NET
Framework 2.0, respectively the latest language package.
3.3
No hardware found
During the configuration the error ‚no hardware found’ appears:
In this case, please check the USB connection to the PC-interface. If necessary, the
USB cable must be exchanged. If this is not the cause of the error, we ask you to
check the proper installation of the device driver. It is possible, that the driver must be
installed manually via the device manager. Once the device driver is properly
installed, please disconnect the PC-interface. First reconnect the USB cable and then
the power supply.
If this is not the cause, please connect the PC-interface directly to an USB port of the
PC and not to an USB HUB. If you have already connected the PC-interface to an
USB port and the error still appears, please connect the device to another USB port.
© SCHAEFER GmbH
14
DMD Configurator
3.4
Configuration not effective
During the configuration the following error appears: ‚Konfiguration nicht erfolgreich’:
Please check the USB – PC-interface connection to the Display. The control and the
bus connection to the display must be existent.
If this does not fix the error, please check if the number of Displays of the DMD
configurator corresponds with the number of adjusted displays in the user interface.
Another reason for this error could be a not connected hardware (see 3.3)
© SCHAEFER GmbH
DMD Configurator
15