Datasheet - nexus

ESD Anti-Static bags
Metallized Static Shielding Bag
Specification
Transparency
Surface Resistance
45-50% light
Outer surface
4x109 Ohm/sq.
Aluminium surface
1x102 Ohm/sq.
Inner surface
5x1010 Ohm/sq.
Decay time
< 0,02 sec
Temperature limits
-35°C ~ +55°C
Film thickness
3,0 mil
Corrosivity:
Meet Federal Test Method Standard
101C Method 3005, no signs of corrosion
Electrostatic Shielding: Meet EIA541 App. E and MIL-81705C
It uses double axis high-strength polyester as base substrate with
a thin layer of vaporized metal (conductive aluminium) on one
side. The film is further laminated to anti-static PE films. Its
features include transparent visibility and ESD/EMI shielding
based on Faraday Cage Principle. The shielding bag is suitable
for MOS, CMOS, FET ICs. It can also be used in vacuum
packaging applications.
Available Versions:
Standard Bag
with ZIP Lock
Available Versions:
Standard Bag
with ZIP Lock
AL Foil Dry Bag (Moisture Barrier )
Specification
EMI shielding
Electrostatic shielding
Static decay
Surface resistance
>40dB from 1 to 10GHz
<20 Volts (EIA-541 App.E)
<0,01 sec. (5000V ~ 0V)
Outer layer 109-11 Ohm/sq.
Al- layer
<2 Ohm/sq.
Inner layer 109-11 Ohm/sq.
Thickness
150 Microns
Moisture vapor trans. rate <0,01g at 38°C/100sq.Inch /24hours
Tensile strength
MD 1,035 g/mm, T 1,000 g/mm
Elongation
MD 142% (ASTM D-882,Method A)
Heat seal strength
>10 KG/sq. cm (155 c/sec)
It contains advanced multi-layer composite materials. It is
designed to provide ESD, EMI and humidity protections. It is used
for sensitive electronic components that need the best ESD and
humidity control. It is made with extra heavy-duty metal layer, it
can withstand the vacuum packing applications.
All dim. in mm
ESDM
15
Series
ESDM = Metallized Static
Shielding Bag
ESDA = AL foil dry bag
Length
steps by 5cm, i.e.
15 = 15cm
NEXUS COMPONENTS GmbH
W10
X
Width
steps by 5cm, i.e.
W05 = 5cm
Type
leave blanc for standard
Z = with ZIP lock
info@nexus-de.com
www.nexus-de.com
phone +49 (0)531 / 23 142-0
fax
+49 (0)531 / 23 142-55