Technical Data Sheet 19“ 3HU PreCONNECT

Technical Data Sheet
19“ 3HU PreCONNECT® Distribution Module-Panel
For up to 144 channels (288 fibers)
3HU Module-Panel for installation in 19“ cabinets and racks.
Hole pattern acc. to DIN IEC 60297-3 in 84 divided units (DU) ready to accept up to 12 single
3HU-7DU patchfield part-front-plates.
The following two types of back planes are deliverable:
1) The so-called “Z-Blade back plane” to accept 12 of our factory assembled
®
PreCONNECT -Trunks as shown below.
2) The so-called “Tertiary-Cable back plane” to fix our factory assembled
®
PreCONNECT Simplex-, Duplex- and Break-Out-Cables with cable ties as shown at the next page.
Our factory assembled „Plug-and-Play“
®
FO cabling system PreCONNECT -Trunk
240
mm
3HU
= 132 mm
19“ = 483 mm
3HU-7DU patchfield part-front-plate
This panel system is a modular and through this highly flexible platform for FO cabling with all cable types
®
of our factory assembled „Plug-and-Play“ FO cabling system PreCONNECT with all common patchfield
connectivity systems.
®
Different patchfield connectivity systems and fiber types in different PreCONNECT cable types can be
installed in one Module-Panel through the modular design.
Fast and easy „Plug-and-Play“ installation and secure service (e.g. cleaning or repair) through the modular
design.
Individual front labeling possible through labeling fields at each patchfield part-front-plate.
Doc.-No.:DS_3HE_TRE_oe_004
Valid since: 2005-01-24
Rosenberger OSI Fiber Optics GmbH & Co. KG
Created: 2004-12-13/by:HJ
Changed: 2005-01-24/by:HJ
www.osi-fiber.de
Page 1 of 2
Phone: +49 821 24 92 40
Technical Data Sheet
19“ 3HU PreCONNECT® Distribution Module-Panel
The so-called “Z-Blade back plane” to accept 12
®
of our factory assembled PreCONNECT -Trunks.
Cable guidance 45° slant backwards.
Picture with serial top-cover.
The so-called “Tertiary-Cable back plane” to fix
our factory assembled
®
PreCONNECT Simplex-, Duplex- and BreakOut-Cables with cable ties.
Cable guidance straight backwards.
Material and color:
Body and front: Aluminum, silver anodized
Weight:
- 3HU Module-Panel unassembled (empty): Approx. 2 kg
- 3HU-7DU patchfield part-front-plate: Approx. 0,1 kg
Delivery form:
3HU-7DU patchfield part-front-plate completely factory assembled incl.
- FO couplers
- labeling field and screws
3HU Module-Panel completely factory assembled with the required rear-wall type
Doc.-No.:DS_3HE_TRE_oe_004
Valid since: 2005-01-24
Rosenberger OSI Fiber Optics GmbH & Co. KG
Created: 2004-12-13/by:HJ
Changed: 2005-01-24/by:HJ
www.osi-fiber.de
Page 2 of 2
Phone: +49 821 24 92 40
GEHÄUSE
90
PANELS
19” 3 HE PRECONNECT®
VERTEIL-BAUGRUPPENTRÄGER
19” 3 HU PRECONNECT®
DISTRIBUTION MODULE PANEL
für bis zu 144 Kanäle (288 Fasern)
for up to 144 channels (288 fibers)
3 HE Baugruppenträger mit Lochmuster gemäß
DIN IEC 60297-3 in 84 Teileinheiten (TE) zum Einbau in
19“-Schränke in Verteilern gemäß ISO/IEC 11801, ISO/IEC
24702 und DIN EN 50173-Familie. Für die Aufnahme von bis zu
12 einzelnen 3 HE - 7 TE Patchfeld-Teilfrontplatten.
3 HU module panel with hole pattern acc. to DIN IEC 60297-3 in 84
divided units (DU) for installation in 19” racks in distributors acc. to
ISO/IEC 11801, ISO/IEC 24702 and EN 50173 family. Ready to accept
up to 12 single 3 HU - 7 DU patch field part front plates.
Mit zwei Rückwandtypen lieferbar (siehe Seite 91):
1. „Z-Blech Rückwand“ für die Aufnahme von 12 unserer
werkskonfektionierten „Plug-and-Play“ LWL-Verkabelungssysteme PRECONNECT®-Trunk ausgelegt.
2. „Tertiärkabel-Rückwand“ zur Abfangung von Simplex-,
Duplex- und Break-Out-Kabeln mit Kabelbindern.
Deliverable with two back plane types (see page 91):
1. “Z-blade back plane” designed to accept 12 of our factory assembled “Plug-and-Play” FO cabling systems PRECONNECT®-Trunk.
2. “tertiary cable back plane” to support simplex-, duplex- and break
out cables with cable ties
EIGENSCHAFTEN
Properties
• Rückwandtypen gemäß Beschreibung oben und
Darstellungen auf Seite 91
• Der Baugruppenträger ist eine modulare Plattform für
verschiedene Patchfeld-Stecksysteme und LWL-Fasertypen.
• individuelle Frontbeschriftung möglich durch Beschriftungsleisten auf jeder Patchfeld-Teilfrontplatte
• Material und Farbe:
Korpus und Front: Aluminium, silber eloxiert
• Gewicht:
Baugruppenträger unbestückt ca.:
2,0 kg
Patchfeld-Teilfrontplatte bestückt ca.
0,1 kg
• back plane types as described above and shown at page 91
LIEFERFORM
Delivery form
• Patchfeld-Teilfrontplatten komplett werksmoniert
inkl. LWL-Kupplungen, Beschriftungsleiste und
Befestigungsschrauben
• Baugruppenträger komplett werksmontiert
mit entsprechender Rückwand
• patch field part front plates completely factory assembled
incl. FO couplers, labeling and screws
ZUBEHÖR
Accessories
• siehe Seite 91
• see page 91
• the module panel is a modular platform for different
patch field connectivity systems and FO fiber types
• individual front labeling possible with labeling fields on
each patch field part front plate
• material and color:
body and front: aluminum, silver anodized
• weight:
module panel unassembled approx.: 2.0 kg
patch field part front plate assembled approx.: 0.1 kg
• module panel completely factory assembled with
corresponding back plane
PANELS
GEHÄUSE
19” 3 HE PRECONNECT® VERTEIL-BAUGRUPPENTRÄGER
19” 3 HU PRECONNECT® DISTRIBUTION MODULE PANEL
ABMESSUNGEN
Dimensions
436
37.5
236
57.1
132 = 3 HE/HU
7
19" = 483
465
427
35.2
BESTELLNUMMER für Einzelkomponenten
part number for single components
19“ 3 HE PRECONNECT® VERTEIL-BAUGRUPPENTRÄGER
für Patchfeld-Teilfrontplatten
mit „Z-Blech-Rückwand“ für die Aufnahme von
12 unserer werkskonfektionierten „Plug-and-Play“ LWLVerkabelungssysteme PRECONNECT®-Trunk
141A0000
19“ 3 HU PRECONNECT® distribution module panel
for patch field part front plates
with „Z-blade back plane“ designed to accept 12 of our
factory assembled “Plug-and-Play” FO cabling systems
PRECONNECT®-Trunk.
19“ 3 HE PRECONNECT® VERTEIL-BAUGRUPPENTRÄGER
für Patchfeld-Teilfrontplatten
mit „Tertiärkabel-Rückwand“ zur Abfangung von
Simplex-, Duplex- und Break-Out-Kabeln mit
Kabelbindern
141A0007
19“ 3 HU PRECONNECT® distribution module panel
for patch field part front plates
with „tertiary cable back plane“ to support simplex-,
duplex- and break out cables with cable ties
3 HE-7 TE BLIND-TEILFRONTPLATTE - 3 HU-7 DU blind part front plate
141A0002
3 HE -7 TE PATCHFELD-TEILFRONTPLATTEN mit Kupplungen bestückt
3 HU-7 DU patch field part front plates assembled with couplers
ANZAHL FASERN
number of fibers
1
STECKSYSTEM
connectivity system
SM
MM 50 µm
MM 62,5 µm
12
SC»SC-Duplex
SC»ST-Duplex
ST»ST-Duplex
E-2000™»E-2000™1
E-2000™ HRL»E-2000™HRL1
141A0143
141A0153
141A0123
141A0803
141A0813
141A0043
141A0053
141A0033
141A0873
-
141A0043
141A0053
141A0033
141A0873
-
24
MU»MU-Duplex Horizontal
LC»LC-Duplex
141A0175
141A0135
141A0185
141A0165
141A0195
141A0175
= Typ/type R+M
91