PDF - R. Rauch GmbH

Product Datasheet
06899.250.84200
FOLEX DIGIPRINT-IG/WOSC
Static Cling white opaque glossy Film for HP Indigo Digital Presses
Specially coated static cling film for Electro Ink with a white glossy surface. The film
is heat stabilized for good flatness properties and the coating offers excellent ink
transfer & bonding for consistent image performance. The film has a silicon release
liner which is removed when applying to a window type surface.
Characteristic
Good water resistance
Back layer clings to smooth surfaces (glass, metall) without adhesives, easy to
remove
Superb ink adhesion and image transfer
Easy storage
Excellent dimensional stability
Officially approved by HP Indigo test centre
Tear resistant
Consistent performance
No limited shelf life
Suitable for short and long runs
Dedicated coating for HP Indigo Electro Ink
Finish
Gloss Surface
White opaque surface
Folex Coating GmbH, Unnauer Weg 6c, D-50767 Köln, Tel. +49 (0)221 9794 790, Fax +49 (0)221 9794 799
www.folex.de, info@folex.de
18.03.2014
Update PDF
Show online
Specifications
Coating frontside
Print side
Back side
Base material
Width (mm)
Length (mm)
Width (inch)
Length (inch)
Format
Base/Nominal thickness (mm)
Base/Nominal thickness (mil)
Coating thickness (mm)
Coating thickness (mil)
Total thickness (mm)
Total thickness (mil)
Packing quantity (sheets)
HP Indigo Electro Ink
Special reactive coating for toner, Glossy side
Cling layer with thin protection sheet
Polyester film
320
450
12.6
17.72
SRA3
0.275
11
0.01
0.48
0.29
11.48
50
Compatibility
Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX
series).
Suitable for Digital Presses from HP Indigo.
Handling
A preconditioning period of 24 hours within the printing environment is
recommended.
Avoid fingerprints on printing side.
No special handling required.
Please carefully follow the handling instructions supplied with this product as well as
the press manufacturers manual.
Storage
Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of
30 - 60%.
Further Articles
Cut sheets
Folex Coating GmbH, Unnauer Weg 6c, D-50767 Köln, Tel. +49 (0)221 9794 790, Fax +49 (0)221 9794 799
www.folex.de, info@folex.de
18.03.2014
Update PDF
Show online
Art. Number
Base/Nominal
thickness (mm)
Format
Packing
quantity (sheets)
06899.250.84400
0.275
SRA3
100
Folex Coating GmbH, Unnauer Weg 6c, D-50767 Köln, Tel. +49 (0)221 9794 790, Fax +49 (0)221 9794 799
www.folex.de, info@folex.de
18.03.2014
Update PDF
Show online