Tools - Howard Core Company

Transcription

N E W ! ! - G e w a To o l s
Howard Core Company is very proud
to be the Exclusive Distributor of
Gewa Tools in North America!!
We have always done our best to maintain a large inventory and selection of quality tools for the luthier. Over the years,
this selection has become one of the largest and best in the US.
And now, it’s gotten even BIGGER!
Gewa Music is one of the largest distributors in Europe, and is well-known for their quality product line. All of the tools
you see on the next three pages are new to our catalog! Rather than mixing them in with our existing selection of tools,
we have listed them here so that you can more easily familiarize yourself with these new products. Please be aware that
there are plenty more clamps, peg shapers, gauges, etc. on the remaining pages of this catalog.
CLAMPS
item #
description
GW467116
Parallel hand screws, 40 mm opening, 70 mm depth.
$ 29.69
NET
GW466849
Jointing clamp, adjustable. Mounts on the middle bout.
136.59
GW467505
Crack clamp, 4 part - violin. Flat profile brass shafts. Moveable, glue-repellant polyamid jaws.
182.91
GW467525
Crack clamp, 4 part - cello. Flat profile brass shafts. Moveable, glue-repellant polyamid jaws.
190.03
GW467555
Crack clamp, 6 part - bass. Flat profile brass shafts. Moveable, glue-repellant polyamid jaws.
320.68
GW467570
Crack clamp for violin/viola. Brass, 3 arms adjustable in
length & angle, one adjustable holding arm, polyamid jaws.
147.27
GW467575
Same as above, for cello.
163.90
GW467620
GEWA-OPTI Crack Repair Clamp System. For gluing
horizontal cracks, perfect height compensation. 4 adjustable
ball head steel screws on top & base. Violin.
330.18
GW467648
Vertical edge clamp, Swiss model. Vertically & horizontally adjustable, spring guided, 4 screws. Lightweight titanium.
148.46
GW467116
GW467620
GW467505
GW466849
GW467575
GW467648
HAMMERS
item #
description
GW481925
Hammer, for edge inserts.
NET
GW481970
Soundpost hammer, with wooden handle. Violin.
38.61
GW481971
Soundpost hammer, with wooden handle. Cello.
47.51
$ 26.13
GW481970
GW481925
CUTTING TOOLS
item #
description
NET
GW481300
Chopping knife with leather handle. 22.5 cm length.
$ 16.63
GW481910
Purfling cutter, Saxon model.
197.16
GW481917
Cutting gauge. For cutting borders, purflings, etc. Measuring scale up to 60 mm. Working scale 0 - 120 mm.
27.32
GW481300
GW481917
GW481910
254
toll-free order line: 800.633.2302
PAGE LAST UPDATED: 6-15-2009
toll-free fax line: 877.633.2302
MISCELLANEOUS
item #
description
GW481960
Violin pan, for repairs. Felt-covered.
NET
GW466670
Inner bout repair screw, for violin. Glue repellant synthetic, high precision. Brass winding.
8.08
GW466671
Corner repair screw, for violin. Glue repellant synthetic,
high precision. Brass winding.
8.08
GW466672
Outer bout repair screw, for violin. Glue repellant synthetic, high precision. Brass winding.
8.08
$ 78.39
GW481960
GW481956
SHAPERS & REAMERS
item #
description
GW465940
Peg reamer, violin. Taper 1:30. Three cutting edges, cut
length 105 mm. Ø 4.0 - 7.5 mm.
NET
GW465950
Peg reamer, cello. Taper 1:25. Three cutting edges, cut
length 200 mm. Ø 8.0 - 16.0 mm.
97.99
GW466048
Peg reamer, cello. Taper 1:25. Three cutting edges, cut
length 195 mm. Ø 10.0 - 16.5 mm.
146.98
GW466060
Endpin reamer, cello. Taper 1:17. Three cutting edges,
cut length 160 mm. Ø 16.0 - 25.5 mm.
245.85
GW466100
Peg shaper, violin. Taper 1:30. Ø 7.5 - 9.2 mm, cut length
50 mm.
296.93
GW466101
Replacement blade for #GW466100, above.
$ 55.82
GW466100
59.39
GW466101
RASPS & FILES
item #
description
NET
GW482261
Precision flat rasp, 200 mm length, cut 1.
$ 45.13
GW482263
52.26
GW482411
47.51
GW482500
Half-round rasp, 125 mm length, cut 3.
43.94
GW482800
Needle file, 100 mm length, cut 4.
19.19
GW482805
Needle file, 100 mm length, cut 1.
18.05
GW482261
GW482263
GW482411
GW482500
MARKING & MEASURING TOOLS, TEMPLATES
item #
description
GW485052
Straight edge. Steel with rounded edge, without calibration.
50 cm.
GW485060
Variable angle bevel. 95 mm length. Hardened steel edge,
rosewood handle w/ brass fittings.
23.75
GW485065
Precision square. 60 x 40 mm. Wit Lock.
19.60
GW485070
Precision square, 100 x 65 mm. Wit Lock.
41.57
GW485082
Protractor. Calibration 1º - 180º. Metal.
14.25
GW485085
Metal marking gauge.
68.89
GW485087
Wood marking gauge.
26.13
GW486300
Bridge templates, for violin, viola, & cello. Set of 6.
GW486305
Fingerboard rounding template, for violin. Rounding
radius 41.5 mm
NET
$ 26.13
GW485065
GW485082
GW485085
GW485060
179.95
18.41
GW485087
email: info@howardcore.com
www.howardcore.com
255
PLANES
item #
description
GW468020
Arched sole plane, 30/10 mm, with 10 mm toothed blade.
NET
GW468040
Arched sole plane, 37 1/2 mm. Mittenwald model.
79.28
GW468520
Replacement blade for GW468020, above.
23.64
GW468540
Replacement blade for GW468040, above.
23.64
GW468610
Stanley plane, No. 102.
43.71
GW468645
Stanley plane, No. 9 1/2.
$ 71.62
111.64
GW468020
GW468040
GW468520
GW468540
ROUTER
item #
description
GW481902
Portable router. Perfect for milling out purfling channel.
Includes two cutter bits (1.5 mm & 2.0 mm), and adjustable
catch (3.5. - 5.5mm). 110 V.
NET
$ 1,193.64
GW481903
Replacement bit - 1.5 mm.
13.06
GW481904
13.06
GW481905
13.06
GW481907
13.06
GW481902
BENDING IRON
item #
description
GW481933
Bending iron, for cello. 110V, Euro plug. Brass body, thermostat with controller, pilot lamp & bending sheet. Requires
connecting cable, item #GW481949 (below), & 220V / 110V
adapter (item #736002-A, $25.00 NET).
GW481935
Bending iron, like above, for bass.
GW481949
Connector cable for bending iron, above (necessary item!)
NET
$ 1,365.86
1,538.07
DISCONTINUED
13.06
GW481933
GW481949
GRINDER
item #
description
GW481755
Visual grinder. For knives, center punch, etc. 220V (euro
plug). Includes 1 grinding wheel. NOTE: This item will require
a 220V / 110V adapter! (item #736002-A, $25.00 NET)
GW481771
Replacement grinding wheel for GW 481755, above.
60 granularity.
95.02
GW481776
Replacement grinding wheel for GW 481755, above.
120 granularity.
95.02
ORDER ONLINE !!
www.howardcore.com
256
NET
$ 1,015.48
GW481771
GW481755
peghole reamers & peg shapers
american made peg hole reamers
no.
description
NET
730500
Violin
$ 35.00
730600
Cello
80.80
730500
730600
AMERICAN PEG SHAPERS
Adjustable shapers, cuts all sizes from 1/4 4/4 violin & viola. Cello shaper cuts all size
Cellos
no.
description
730105
Violin
$ 53.90
730205
Cello
70.00
description
230
Violin, for American model
231
Cello, for American model
no.
description
F21000
Peghole reamer for violin, small. Taper 1/30.
NET
$ 100.93
F21200
Peg shaper for violins 1/4 - 1/16 sizes.
119.28
F21202
Peg shaper for 4/4 - 1/2 size violin, viola.
133.04
F22000
Peghole reamer for violin, standard. Taper 1/30.
105.51
F22100
Peghole reamer for cello, taper 1/25.
174.35
F2210A
Reamer for cello peghole bushings.
201.87
F22300
Peg shaper for cello, 4/4 - 1/2 sizes.
169.74
F22350
Peg shaper for lute.
178.93
F22400
Endpin reamer for cello.
201.87
F22500
Endpin reamer for bass.
298.21
F22600
Endpin reamer, cello/bass.
504.67
F21200
F21202
BLADES FOR AEHNELT PEG SHAPERS
NET
BLADES FOR AMERICAN MADE
PEG SHAPERS
no.
AEHNELT PEG SHAPERS & REAMERS
no.
description
212
Replacement blade for F21202, above.
$ 25.68
NET
212-S
25.68
223
28.44
F22300
NET
$ 14.15
19.55
F21000
F2210A
F22100
F22350
F22400
F22500
730105
MORE REAMERS, TAPER PIN, DRILL BIT, ROUTER
no.
description
730525
Taper pin for peghole bushing - violin. Taper 1/20, Ø
10.0 mm - 4.5 mm, length 165 mm.
NET
735666
Spiral peghole reamer, violin/viola.
$ 70.67
46.55
735666-T
Peghole reamer. Like above, with TiN coating.
58.15
T-2458
Peghole router
87.16
706016
Drill bit. Double twist auger bit with outer spurs
for cutting clean, cylindrical holes. Length 235 mm.
Hexagonal shaft 12 mm.
730525
735666-T
T-2458
8.78
706016
WITTNER PEG SHAPER KIT NEW!!
For violin & viola. 7.0 mm - 9.4 mm.
Cone - 1:20, 1:25, 1:30. Width of blade - 51 mm.
Use with Wittner Ultra Pegs, or with any wooden pegs
Ø 0.275” - 0.370”.
no.
description
730111
Wittner peg shaper kit
278
(2) replacement blades.
730111
NET
$ 145.50
39.79
www.howardcore.com
257
herdim peghole reamers
Herdim PEG HOLE REAMERS
For trimming and finishing pegholes. Made of high-speed steel (hardened to 62 RC), the cutting edge is abrasion resistant even under excessive use. Our
Peghole Reamers come with 3 cutting edges only, which is best for achieving perfectly round holes. Together with our Peg Shapers they give you a precise fit
of pegs and pegholes.
Straight cutting edges are particularly sharp and guarantee perfectly round holes.
Spiral cutting edges allow for previously unheard of cutting quality. The wood fibers are at an angle which makes these reamers completely chatter-free,
ensuring perfectly round holes. This is especially important for old instruments with very hard medullary rays and sensitive peg-box walls. Polished rosewood
handles.
TiN Coating (titanium-nitride) provides a three-fold improvement in the reamer’s edge life, protects it from corrosion and reduces friction during use. By
allowing a smoother and gentler cut, it also reduces the stress placed on the pegbox. The sharpness is not affected by the coating in any way.
VIOLIN PEGHOLE REAMERS (VIOLA TO 1/2 SIZE VIOLIN)
STANDARD TAPER 1/30 (Matching Shaper: #730102)
no.
description
730502
Violin Standard, Taper 1/30 Ø 5.5/10mm, length 135 mm.
730512
TiN-coated Violin Standard
730522
Normal, standard violin/viola, spiral.
730532
TiN-coated, standard violin/viola, spiral.
NET
79.69
100.60
87.54
730512
109.74
VIOLIN PEGHOLE REAMERS (1/2 - 1/16 SIZE VIOLIN)
SMALL TAPER 1/30 (Matching Shaper: #730101)
no.
description
730501
Violin Small, Taper 1/30 Ø 4.0/7.5mm, length 105 mm.
NET
$ 66.63
730511
TiN-coated Violin Small.
87.54
730524
Normal, small violin, spiral.
73.17
730531
TiN-coated, small violin, spiral.
94.72
730532
730531
VIOLIN PEGHOLE REAMERS (VIOLA TO 1/2 SIZE VIOLIN)
IRREGULAR TAPER 1/20 (Matching Shaper: #730103)
no.
description
730503
Violin, Taper 1/20 (irregular) Ø 3.5/10mm, length 130 mm.
730513
TiN-coated, iregular violin.
730523
Normal, 1/20 irregular violin, spiral.
730533
TiN-coated, 1/20 irregular violin, spiral.
NET
$ 81.65
730621
730631
100.60
90.15
111.06
CELLO PEGHOLE REAMERS,
(Matching Shaper: #730201-03 & 730801)
no.
description
NET
730601
Cello, Taper 1/25 Ø 8/16mm, length 200 mm.
730611
Cello TiN-coated.
152.21
730621
Normal, 1/25 standard cello, spiral.
136.52
730631
TiN-coated, 1/25 standard cello, spiral.
178.99
$ 114.97
730601
730513
LUTE / VIOLA PEGHOLE REAMERS,
(Matching Shaper: #730201-04 & 730801)
no.
description
730505
Lute peghole reamer.
NET
730505
$ 130.65
HERDIM TAPER PINS
Taper pins are for setting ring-shaped peghole bushings and for smoothing the surfaces of
the holes. Made of tool steel with precision-ground conical pin.
no.
description
730521
Violin, taper 1/30, 10 X 4.5 mm diameter, length 165 mm.
$ 69.66
730622
Cello, taper 1/25, 15 X 6 mm diameter, length 225 mm.
135.16
258
NET
ALL TOOL PRICES ARE NET!!
herdim peg shapers
Herdim
PEG shapers
The seven models we offer each feature a range of peghole sizes, allowing them to cover the whole range of peg sizes, from the smallest violin to the largest
cello. The brass bodies are fitted with double-sided blades which display high cutting performance and excellent edge-holding properties. Resharpening of the
blades is not recommended due to the differential hardening of the cutting edges. The soft plastic case provides a comfortable, non-slip grip. All peg shapers
come with instructions for use and a key for adjusting the blade.
730101
730102
730201
730202
730203
730800
VIOLIN STANDARD, TAPER 1/30
(Matching reamer: no. 730502)
CELLO SMALL, TAPER 1/30
LUTE / VIOLA DA GAMBA, TAPER 1/25
For 3/4 - 4/4 Violin/Viola.
Length of the holes: 50 mm.
Size (thick end): 8.0 / 8.5 / 9.0 / 9.5 mm.
Weight: 540 g.
For 1/8 – 1/4 Cello & Violin.
Size (thick end): 10.75 / 11.5 mm.
Weight: 690 g.
For Lute and Viola da Gamba.
Weight: 600 g.
no.
730102
no.
730201
no.
730204
NET
$ 158.08
NET
$ 154.17
VIOLIN SMALL, TAPER 1/30
CELLO MEDIUM, TAPER 1/25
For 1/16 – 3/4 Violin.
Size (thick end): 6.0 / 6.5 / 7.0 / 7.5 mm.
Weight: 590 g.
For 1/4 – 3/4 Cello.
Weight: 640 g.
no.
730101
no.
730202
NET
$ 158.08
NET
$ 154.17
VIOLIN IRREGULAR, TAPER 1/20
CELLO LARGE, TAPER 1/25
For 1/8 - 4/4 Violin/Viola.
Size (thick end): 7.25 / 8.0 / 8.75 / 9.5 mm.
Weight: 560 g.
For 3/4 - 4/4 Cello.
Weight: 600 g.
no.
730103
no.
730203
NET
$ 158.08
NET
$ 154.17
NET
$ 154.17
SPARE BLADES FOR
HERDIM PEG SHAPERS
Heavier, best quality carbon steel, tempered to
extreme hardness, two cutting edges.
no. net
description
730100
$ 5.22
for violin, nos. 730101-3
730200
6.54
for cello, nos. 730201-3
730109
10.45
for violin, nos. 730101-3
730209
16.56
for cello, nos. 730201-4, 8
730100
730200
“HERDIM” MULTI Peg Shaper
The “HERDIM” MULTI is the most sophisticated
peg shaper for professional restoration. By adjustment of diameter and taper pegs can be shaped
to match given peghole sizes. Less or no trimming
of the peghole saves working time and - even
more important - saves the scroll substance. Also
ideal for trimming peghole bushings and for historical instruments.
730109
730209
Separate adjustment nuts for taper and diameter.
Machined in ultimate precision from aircraft aluminum alloy, anodized. Razor-like one-way blades
for a perfectly smooth surface. Satisfaction guaranteed! Taper: 1/15 - 1/100.
no.
730800
730801
description
NET
Violin / viola, Ø 6.0 - $ 333.16
12.0 mm, length 50 mm.
Cello, Ø 10.0 - 15.0
421.99
www.howardcore.com
259
endpin reamers
herdim ENDPIN REAMERS
Herdim Endpin Reamers come in longer sizes to cover a wider span of endpin diameters and allow more varied use. The Cello
Endpin Reamer which overlaps with the Peghole Reamer may also be used for enlarging pegholes for bushings. All reamers are
made of high speed steel, tempered to HRC 61, for a sharp and durable cutting edge.
CELLO ENDPIN REAMERS
Taper 1/17, Ø 15.0/27.5 mm, length 212.5 mm.
(also suited for cello peghole bushings).
no.
730701
730721
730731
description
Straight, uncoated.
Spiral, uncoated.
Spiral, TiN coated.
NET
$ 212.95
231.25
293.96
730721
BASS ENDPIN REAMERS
Taper 1/17, Ø 23.0/36.0 mm, length 221 mm.
no.
730702
730732
description
Straight, uncoated.
Spiral, TiN-coated.
NET
$ 310.94
402.63
730702
BASS ENDPIN REAMER, OVERSIZED
For bushings.
no.
730722
description
Spiral, TiN coated.
NET
$ 655.85
730722
CELLO / BASS ENDPIN REAMER
Combination cello & bass reamer.
no.
730703
description
Straight, uncoated.
NET
$ 628.41
american made ENDpin reamers
no.
description
730700
Cello endpin reamer.
NET
730732
$ 128.25
730700
260
sharpening stones & knives
“King Stones”
no.
BELGIAN LUMP BLOCK Stones
NET
grit
size in mm
no.
NET size in mm
711001
$ 36.28
1800 Grinding
207 x 66 x 34
705556
$ 85.51
711002
36.28
1200 Grinding
207 x 66 x 34
705557
24.22
711004
98.64
8000 Honing
185 x 65 x 19
150 x 40 x 20
75 x 30 x 20
King Combination Stone
711005
52.26
1000/6000
Grinding/finishing
205 x 50 x 25
Stone conditioner - Nagura stone
no.
711301
NET
$ 24.94
grit
size in mm
Natural
ca. 50 x 40 x 30
HONING CONE
no.
description
705393
Cone-shape, half-round diamond coated sharpener. Outside coated only. Ø 9.5 - 19.3 mm. Length 152 mm.
pfeil woodworking knives
Special Swiss alloy steel hardened to approx. 59-60 RC, double bevel.
Length 160 mm, blade thickness 2 mm. Rosewood handle.
no.
width
700390
3.5 mm
NET
NET
$ 64.02
Knives
Extremely hard, long-lasting alloy steel (HCR 62-63) with handle. German.
$ 28.74
700391
6 mm
28.74
no.
width
NET
700392
9 mm
28.74
700301
6 mm
$ 38.57
700393
12 mm
28.74
700302
8 mm
39.95
700394
15 mm
28.74
700395
19 mm
28.74
700303
10 mm
41.33
700304
12 mm
46.84
700305
15 mm
52.36
700306
18 mm
59.25
SABATIER WOODWORKING KNIVES
Sabatier is one of the oldest manufacturers of knives and other high-performance cutting tools in France. The blades of these knives are made of XC 100
stainless surgical steel, hardened to approximately 62 RC, and come sharpened and ready to use. The tapered, polished Macassar ebony handles are
securely held in place by brass rivets. Blade length 70 mm, overall length 180 mm, blade width approximately 24 mm.
no.
description
700411
Double bevel
NET
700412
Right bevel (for left-handed users).
31.35
700413
Left bevel (for right-handed users).
31.35
700411
$ 31.35
700412
Japanese Knives (Kogatana Deluxe)
Japanese cutters of fine quality laminated steel, easier to resharpen and less brittle than “Western” cutters. The blade is tempered to a hardness of 60°
- 61° Rockwell and trimmed to a razor-like cutting edge. The beveling is either on both sides for versatile application or on one side only. The one-sided
bevel should be preferred if extreme cutting precision is demanded (i.e. veneer of inlay work or marking cuts).
Kogatana come without handles. We recommend to wrap the blades with, according to Japanese habit, a leather strip or fix a slim wooden handle.
These are handforged by master Shozo Ikeuchi Lo in traditional style. By multiple folding of the steel a “woodgrain” pattern is achieved (“Damascus” steel)
and the strength and durability of the blade is considerably improved.
bevel: both sided
NET
bevel: left
no.
bevel: right
width
no.
NET
no.
NET
18 mm
710501
$ 91.45
710511
$ 94.06
710521
15 mm
710506
74.47
710516
94.06
710526
74.47
12 mm
710502
74.47
710512
83.61
710522
74.47
$ 91.45
10 mm
710507
74.47
710517
75.78
710527
74.47
8 mm
710503
74.47
710513
75.78
710523
74.47
6 mm
710504
74.47
710514
75.78
710524
74.47
3 mm
710505
74.47
710515
75.78
710525
74.47
www.howardcore.com
261
glue pots & lamps
HERDIm electric Glue Pot
no.
description
736002
Compact electric glue pot for violinmaking and other
smaller scale work. Ø 105 mm, height 160 mm. 120W.
110 V. Ceramic glue container, 0.25 liter.
736003
1 liter, for large scale projects. 220 V. 240 W. Plastic
glue container & lid.
736003-A
Adapter 220V to 110V, for 736006 above.
NET
$ 254.77
736002
361.66
25.00
HERDIm spirit lamp Glue Pot
A traditional glue pot heated by an adjustable spirit lamp. The glue kettle, submerged in
water, is made of ceramic in order to avoid oxidation (blackening) of the glue. Volume: 0.25
Iiter. Brass housing, aluminum sole. 1/2 year guarantee.
no.
description
736101
Glue pot w/ spirit lamp. (no. 706003)
736102
Glue pot w/out spirit lamp. DISCONTINUED - WHILE
NET
736101
$ 173.10
89.08
SUPPLIES LAST!
Electric Glue Pot - AMERICAN MADE
A large volume glue pot which operates without water jacket by a heated internal container.
The corrosion free aluminum glue kettle is removable. Thermostatic, preset temperature control. Reliable design for professional use. Volume: 1 quart. 1/2 year guarantee.
no.
description
706011
Glue pot 110V. American-made.
706012
Removable aluminum kettle.
NET
706011
$ 99.00
41.59
CONTAINERS & LIDS
no.
description
736000
Glue kettle, ceramic, for HERDIM glue pots. Volume: 0.25 L
NET
736005
Clear lab glass glue kettle for HERDIM glue pot. Volume: 0.25 L
20.13
736015
Plastic, double-chambered glue container for simultaneously
heating glue and water. Polypropylene, 0.25 l.
16.98
736016
Plastic lid for use with #736016, above. Has hole for brush.
11.76
$ 14.37
736015
736016
spirit lampS & WICKS
no.
description
706003
Steel spirit lamp w/ wick rack & handle. Vol. 120 ccm.
Burns up to 6 hours. (for Herdim Glue Pot
no. 736102).
706005
Wick for nos. 706002 & 706003 [length 1m).
706008
Glass spirit lamp, 120 ccm capacity, round wick.
706009
15 cm wick for #706008 lamp.
706013
Glass spirit lamp - 120 ccm.
706014
15 cm replacement wick for item #706013, above.
NET
$ 89.91
736005
706003
3.05
18.93
706008
2.16
18.15
1.83
706013
706014
262
glue brushes, animal glues
Linden bast glue brushes
Stiff bristles, resistant to wear, can be shaped with a chisel. When worn, new
bristles are created by hammering the handle. Length approx. 21 cm.
no
NET
706125
6 mm
$ 5.22
706126
11 mm
7.84
706127
14 mm
10.34
Glue Brushes - Horsetail Hair
Corrosion free thread winding. No glue blackening.
no.
NET
706105
size 2 (Ø 14 mm)
$ 8.85
706106
size 4 (Ø 16 mm)
10.15
706107
size 6 (Ø 18 mm)
11.64
706108
size 8 (Ø 21 mm)
14.32
GW464750
10 mm - no metal.
7.13
GW464760
14 mm - no metal.
8.31
706107
GW464760
ANIMAL GLUEs
Animal glues have been used by woodworkers for over 4,000 years. They are completely non-toxic, non-ageing,
are easily reversible by heat and therefore ideal for repair work. The use of these glues is relatively uncomplicated. The most important criterion is an even, controlled heating process and the maintenance of a defined temperature range (about 60˚ - 70˚ Centigrade or 140˚ to 158˚ Fahrenheit) which keeps the proteins from degenerating.
no.
description
G 50
Ground hide glue, best quality, for flexible bonds. 1 lb. bag.
$ 5.25
G 51
Rabbit glue, higher viscosity than hide glue, strongest bonds.
500 gram bag. (approximately 1 lb.)
15.43
G 52
Fish glue, pure bladder of Russian sturgeons, low viscosity,
extremely strong. 100 grams.
G 53
Animal bone glue. 1 kilogram.
G 51
NET
193.60
9.15
G 52
G 50
www.howardcore.com
263
rasps
HERDIM PRECISION RASPS, HANDCUT
Rasps come in where shaping no longer follows the laws of plane geometry. Therefore, they are equally indispensable for the cabinet
maker, the violin maker, model builder or stuccoist. The best rasps are still cut by hand. Each tooth is formed individually with hammer and chisel and no two teeth are exactly the same. It is precisely this slightly irregular tooth configuration that ensures the smooth
removal of wood and avoids clogging of the rasp. You can use these tools not only for hard and soft wood but also for leather, plastic,
plaster and soft metal. Hard carbon steel body, tempered tang. As they are handcrafted, the sizes of these rasps may vary slightly. Cut
3=coarse, 4=medium, 5=fine, 10=extra fine.
1
2
3
4
5
6
Flat rasp (with handle tang)
number
cross section
cut length
704505
25 x 4 mm
200 mm
cut
3
$ 46.97
NET
704506
25 x 4 mm
200 mm
4
51.49
704507
25 x 4 mm
200 mm
5
59.15
number
cross section
cut length
704502
10 x 4 mm
125 mm
5
$ 33.97
704704
16 x 4 mm
150 mm
5
41.75
704707
20 x 5 mm
200 mm
5
60.81
704709
Herdim “Ultra”
24 x 5 mm
200 mm
10
154.75
cut
NET
Flat rasp
cut
NET
Cabinet rasp
number
cross section
cut length
704716
20 x 4 mm
150 mm
5
$ 52.98
704720
24 x 5 mm
200 mm
3
54.45
704721
24 x 5 mm
200 mm
4
60.81
704722
24 x 5 mm
200 mm
5
64.14
704724
Herdim “Ultra”
24 x 5 mm
200 mm
10
167.77
cut
NET
6
5
4
Half-round rasp
number
cross section
cut length
704732
16 x 5 mm
150 mm
5
$ 46.97
704733
20 x 4 mm
200 mm
5
55.59
3
2
1
Half-round rasp, slim
number
cross section
cut length
cut
NET
704741
10 x 3 mm
150 mm
5
$ 42.69
cut
NET
Cross rasp
number
cross section
cut length
704551
16 x 5 mm
150 mm
5
$ 51.31
704553
20 x 6 mm
200 mm
5
73.64
264
While we can’t get you this saw (or the 200 year old spruce!), we CAN provide you with just
about any other type of luthier tool you might require. If you can’t find it on these pages, let us
know - chances are, we can get it for you!
Do you have a handy tool that you’ve made yourself, and think others might like? We’d love to
try it - maybe even sell it for you! If you have a home-made tool or technique you’d like to share,
please email photographs and other pertinent information to tools@howardcore.com.
Photograph of the oldest existing sawmill in our
industry, in Markneukirchen, Germany. The saw is
powered by a water-driven wheel.
www.howardcore.com
265
files
GROBET FILES
FLAT FILES
Since the year of its founding in 1811 the Swiss company
GROBET has been setting the standard for quality in the
production of precision files. Although these files were
originally developed for watch makers they are exceptionally well suited for woodworking, also. The workmanship
and edge-holding ability of their cuts are of superb quality.
DOUBLE CUT Swiss
TABLE OF CUTS
German
Swiss
for
cut no.
cut no.
coarse
wood
1
000 - 0
medium
wood
2
0-1
wood/metal
3
1-2
very fine
metal
4
2-3
ultra fine
metal
5
3-4
fine
eight inch
hand files
used by
bowmakers
705030
705031
705032
705033
705034
15 x 4.5 mm
15 x 4.5 mm
21 x 6 mm
21 x 6 mm
21 x 6 mm
cut
length
150 mm
150 mm
200 mm
200 mm
200 mm
705001
705002
705003
705004
705005
705078
705192
705193
705194
705012
705006
705007
705008
705013
705014
705035
705039
705009
705010
705011
15 x 2 mm
15 x 2 mm
17 x 2 mm
17 x 2 mm
17 x 2 mm
17 x 2 mm
19 x 4 mm
19 x 4 mm
19 x 4 mm
22 x 5 mm
22 x 5 mm
22 x 5 mm
22 x 5 mm
22 x 5 mm
22 x 5 mm
22 x 5 mm
26 x 6.5 mm
26 x 6.5 mm
26 x 6.5 mm
26 x 6.5 mm
cut
NET
0
1
00
0
1
$ 58.02
59.86
81.30
85.40
88.96
GROBET LINING FILES FOR BOW FROGS, HAND CUT
For bow frog work.
cut
no.
profile
cut length
705077
16 x 3.5 mm
160 mm
0
$ 54.70
705076
16 x 4 mm
160 mm
3
23.73
WHILE SUPPLIES LAST !
cut
length
125 mm
125 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
150 mm
200 mm
200 mm
200 mm
200 mm
200 mm
200 mm
200 mm
250 mm
250 mm
250 mm
250 mm
cut
NET
0
2
00
0
1
2
00
0
1
000
00
0
1
2
3
4
000
00
0
1
$ 23.87
25.78
24.22
25.78
26.13
27.97
20.37
22.57
22.75
28.21
29.69
31.18
32.67
33.19
35.63
37.29
39.73
42.69
43.11
46.62
SINGLE CUT (for smoothest surface - sharp edges)
21 x 3mm
25 x 4mm
200 mm
250 mm
2
2
NET
number
cross section
cut
NET
13 x 4 mm
13 x 4 mm
15 x 4.5 mm
15 x 4.5 mm
15 x 4.5 mm
15 x 4.5 mm
cut
length
125 mm
125 mm
150 mm
150 mm
150 mm
150 mm
705020
705021
705022
705023
705024
705068
0
2
00
0
1
2
$ 39.38
44.36
39.91
41.99
45.13
49.05
705069
705086
705025
705026
705027
705087
705088
15 x 4.5 mm
21 x 6 mm
21 x 6 mm
21 x 6 mm
21 x 6 mm
21 x 6 mm
21 x 6 mm
150 mm
200 mm
200 mm
200 mm
200 mm
200 mm
200 mm
3
000
00
0
1
2
3
50.00
52.61
53.15
57.25
58.38
67.35
67.35
0
2
4
47.74
52.98
56.89
SLIM (for bow tips, f-holes, etc.)
705028
705029
705074
10 x 3 mm
10 x 3 mm
10 x 3 mm
150 mm
150 mm
150 mm
ORDER ONLINE !!
www.howardcore.com
266
9.57
13.66
HALF-ROUND FILES
CROSS FILES
cross section
cross section
704901
704902
The density and height of the cutting edges
depend on the cut number AND the length of
the file.
no.
number
files
GROBET SADDLE FILES
Precision files with round edges for violin nuts, saddles & bridges.
no.
705015
705016
705017
705018
705019
705019
cross section cut length
cut
0.4 x 10mm
100 mm
2
0.6 x 10mm
100 mm
2
0.8 x 10mm
100 mm
2
1.0 x 10mm
100 mm
2
Complete Set of 4 files, special price
NET
$ 31.89
31.89
31.89
31.89
121.15
GErman saddle files
no.
T-2451
T-2452
description
Set of 4 saddle files, German made.
E string saddle file. German.
NET
$ 55.82
15.44
GROBET ROUND FILES
Very slim, finest cut up to the tip.
705092, 705093, 705066 & 705057 with square handle.
no.
705092
705093
705066
705094
705057
705097
704927
T-2451
cross section
Ø 0.8 mm
Ø 1 mm
Ø 1.5 mm
Ø 1.5 mm
Ø 2.0 mm
Ø 4 mm
Ø 3.6 mm
cut length
38 mm
50 mm
55 mm
75 mm
65 mm
150 mm
100 mm
cut
2
2
2
2
2
0
1
NET
$ 15.86
16.63
15.68
22.57
15.68
26.13
23.73
GROBET NEEDLE FILES Knurled handles Ø 2.9mm, overall length 140 mm, cut length 75 mm.
shape
pillar
flat or ward
three square
square
round
barrette
half-round
cross
knife
round-oval , cross
pillar, round, edges
flat, round edges
Set, 12 pcs.
swiss cut 0 (coarse)
no.
NET
705140
$ 9.15
705141
10.81
705142
10.81
705143
10.81
705144
9.15
705145
10.81
705146
11.64
705147
11.64
705148
11.64
705149
11.64
705150
11.64
705151
11.64
705152
122.10
swiss cut 1 (fine)
no.
NET
705040
$ 9.15
705041
10.81
705042
10.81
705043
10.81
705044
8.78
705045
10.81
705046
11.64
705047
11.64
705048
11.64
705049
11.64
705050
11.64
705051
11.64
705052
122.10
NEEDLE FILE HANDLES
Ergonomic plastic handles with chuck-style fastening mechanism.
no.
704950
704951
description
Ø 2 - 3 mm. Length 95 mm.
Ø 3 - 4 mm. Length 95 mm.
704950
NET
$ 25.78
25.78
704951
FILE CARD (FILE CLEANER)
Brass bristles mounted on beech handle.
Overall length: 250 mm.
Brush area: 40 x 100 mm
no.
705091
NET
$ 17.75
www.howardcore.com
267
chinese rasps, scrapers
HANDMADE CHINESE RASPS
SWORDFISH RASPS (cabinet rasp - tapered)
Handmade Chinese rasps. The irregular surface gives an exceptionally effective cutting action for
coarse work. Sharp, stable cut.
Hardened and chromed rasps which can be bent within limits to permit a wide range of uses.
item no.
cross section
cut length
cut
NET
704569
25 x 4 mm
160 mm
3 coarse cut
704570
25 x 4 mm
160 mm
5 med. fine cut
10.22
704573
30 x 5 mm
240 mm
3 coarse cut
13.06
$ 10.22
FLAT RASP
704571
704571
24 x 4 mm
200 mm
3 coarse cut
9.15
704572
CABINET RASP
704572
25 x 5 mm
190 mm
3 coarse cut
9.15
Scrapers
item no.
description
NET
703500
Set of scrapers - 7 pieces. 0.4 mm
thickness
703500
$ 42.82
SCRAPERS “EBERLE”
no.
NET/each
thickness
703507
$ 3.50 0.25 mm
703502
3.50 0.40 mm
703504
3.50 0.60 mm
703510 (swan neck)
6.06
703505
4.63 0.80 mm
703506
5.10 1.00 mm
0.70 mm
703510
Scraper SHARPENER
item no.
description
703509
Ø 8 mm, length 120 mm, white oak
handle.
NET
$ 18.47
703509
268
planes, awl, workbench
“ECE” Planes
BLOCK PLANE
With screw adjustment of the blade. Body: Steamed Beech.
Sole: Lignum Vitae - the hardest wood known. High quality custom
made blades.
Length: 150 mm; Weight: 450 g
no.
width of blade
NET
703101
39 mm
Plane includes blade
$ 133.44
703104
39 mm
Spare blade
23.28
703103
39 mm
Spare blade - toothed
20.13
703101
NO. 100 PALM PLANE
no.
description
702555
No. 100 Palm plane. Brass body with screw cap.
Polished handle. 25 mm width, 2.2 mm thickness.
Body 82 x 32 mm. 61 RC blade (extra hard).
702556
Replacement blade for #702555.
NET
702555
$ 164.97
16.81
Kujiri PIERCER (AWL)
no.
description
717205
White oak handle. Blade is 55 mm, overall
length 105 mm.
NET
$ 10.45
717205
ULMIA DELUXE WORKBENCH
A good bench must be solid, have a smooth working surface and be fitted with vises capable of firmly
holding pieces of all sizes. These requirements are wonderfully fulfilled by this workbench, made
in Germany by ULMIA especially for our most demanding customers. Weighing in at 100 kilos, it
provides unshakeable stability and optimal vibration control. The extra thick top is made of vibration
dampening red beech that has been glued, sealed and ground absolutely flat - making it ideal for planning and other large scale work. The front vise with double steel guide rods and the unique tail vise
with a backlash-free mechanism work with the precision of a bank vault’s door. The round, rotating
bench dogs allow irregularly shaped objects, such as musical instruments, to be clamped with ease.
The torsion-free spindles with metal springs and full-length vise screws provide the highest possible
stability.
Bench-top dimensions 1500 x 640 mm; overall dimensions 1600 x 820 mm; top thickness at bench
dogs 120 mm, at center 65 mm; height 900 mm. Waxed surfaces, includes 4 bench dogs. Delivered
unassembled, with instructions for easy assembly.
no.
description
NET
706085
See above
$ 2,149.15
www.howardcore.com
269
planes
HERDIM Finger Planes
Small planes with a brass body for shaping the tops and backs of bowed instruments. Slim sides for edge work, and
thick sole which users can modify to their own needs, if necessary. Complete with plain blade and wood wedge.
ARCHED sole PLANES
plane no.
702528
702530
702532
702534
702536
702538
702542
blade width
4 mm
5 mm
7 mm
10 mm
12 mm
18 mm
23 mm
ARCHED sole SPARE BLADES
length of plane
12 mm
20 mm
25 mm
32 mm
40 mm
50 mm
74 mm
net
$ 53.15
50.30
50.30
55.17
59.98
65.66
114.49
blade width
5 mm
7 mm
10 mm
12 mm
18 mm
23 mm
length of plane
20 mm
25 mm
32 mm
40 mm
50 mm
74 mm
net
$ 50.30
50.30
55.17
59.98
65.68
114.49
ARCHED SOLE PLANES WITH SCREW CAP
plane no.
702560
702561
702562
702563
702564
702565
blade width
5 mm
7 mm
10 mm
12 mm
18 mm
23 mm
702528
702530
702532
702534
702536
702538
702542
blade plain blade
width no.
4 mm
5 mm
7 mm
10 mm
12 mm
18 mm
23 mm
702529
702700
702533
702702
702703
702704
702705
toothed
NET blade no.
$ 9.44
9.44
10.04
10.22
10.22
10.22
15.56
------------------702541
702812
702813
702814
702543
length of plane
20 mm
25 mm
32 mm
40 mm
50 mm
74 mm
use with
plane no.
702510
702512
702514
702516
702518
702509
blade plain blade
width no.
5 mm
7 mm
10 mm
12 mm
18 mm
23 mm
702400
702513
702402
702403
702404
702405
toothed
NET blade no.
$ 9.44
10.22
10.22
10.22
10.22
15.56
---------702540
702502
702503
702504
702505
FLAT SOLE PLANES WITH SCREW CAP
net
$ 64.91
64.91
75.90
80.18
85.58
130.65
plane no.
702566
702567
702568
702569
702570
702571
blade width
5 mm
7 mm
10 mm
12 mm
18 mm
23 mm
length of plane
20 mm
25 mm
32 mm
40 mm
50 mm
74 mm
net
$ 64.91
64.91
75.90
80.18
85.58
130.65
SEE ABOVE FOR SPARE BLADES
270
NET
------------------$ 14.79
18.82
18.82
18.82
22.10
FLAT SOLE SPARE BLADES
FLAT SOLE PLANES
plane no.
702510
702512
702514
702516
702518
702509
use with
plane no.
NET
--------$ 14.79
18.82
18.82
18.82
22.10
planes
“IBEX” Finger Planes
Precision cast, silicon bronze finger planes with
accurately guided, screw locked blade. The mouth
is located very close to the face for increased corner workability. All planes come complete with
blade.
PLANE WITH ARCHED sole
plane no.
703301
703302
703303
703304
length x width
25 mm
8.0 mm
30 mm 10.0 mm
36 mm 12.0 mm
47 mm 18.0 mm
SPARE BLADES, ARCHED OR FLAT
net
$ 41.05
44.35
45.10
50.10
PLANE WITH FLAT sole
plane no.
703401
703402
703403
703404
703405
length x width
25 mm
8.0 mm
30 mm 10.0 mm
36 mm 12.0 mm
47 mm 18.0 mm
60 mm 22.5 mm
plain
blade no.
703311
703312
703313
703314
width of
blade
8.0 mm
10.0 mm
12.0 mm
18.0 mm
toothed
net blade no.
$ 11.45
703321
11.45
703322
11.45
703323
11.45
703324
net
$ 13.90
13.90
13.90
13.90
SPARE BLADES, FLAT
net
$ 41.05
44.35
45.10
50.10
58.10
plain
plane no.
703415
width of
blade
22.5 mm
toothed
net blade no.
$ 16.40
703425
net
$ 16.50
FINGER PLANES - with adjustable mouth
All planes come complete with plain blades.
SPARE BLADES, ARCHED
PLANE WITH ARCHED sole
plane no.
703307
length x width
90 mm 27.5 mm
net
$ 136.40
width of
blade
27.5 mm
net
$ 14.90
toothed
blade no.
702817
net
$ 18.30
net
$ 14.90
toothed
blade no.
702816
net
$ 18.30
SPARE BLADES, FLAT
PLANE WITH FLAT sole
plane no.
703306
plain
plane no.
702717
length x width
90 mm 27.5 mm
net
$ 136.40
plain
plane no.
702716
width of
blade
27.5 mm
The World’s SMALLEST PLANE
Micro plane including case.
An original gift for every tool lover.
no.
description
702527
Micro plane
net
$ 64.02
ORDER ONLINE !!
www.howardcore.com
www.howardcore.com
271
measures & compasses
TAPE MEASURE
no.
description
GT-35
Tape measure, inch/mm scales. 2 meter length.
$ 9.50
NET
707158
Inch/MM scales, 2 meter (over 6.5 ft.) overall length, ebony
casing. Pocket sized.
14.16
707160
Like above, with rosewood casing.
14.16
707161
Like above, with boxwood casing.
14.16
707158
707160
GT-35
RULERS
no.
description
NET
RU330
Metal ruler 12” / 30 cm
RU315
Metal ruler 6” / 15 cm
$ 5.50
717128
Flexible precision rule, 1000 mm. Stainless steel.
39.19
717129
Flexible precision rule, 600 mm. Stainless steel.
21.85
707270
Ultra-flexible ruler. 200 x 13 x .2 mm.
10.45
707271
13.72
707272
25.48
4.50
717128
717129
RU 315
707270
RU 330
FIQUET COMPASSES
Solid steel with ground, hardened points and brass fittings. Compasses have quick-acting adjustment screws.
no
description
707150
Compass divider. Leg length 150 mm. Max. opening 160 mm.
707151
Same as above, with pencil holder.
36.58
707152
Outside. Leg length 150 mm. Max. opening 160 mm.
28.74
707153
Inside caliper. Leg length 150 mm. Max. opening 190 mm, min. opening 25 mm.
28.74
707240
Turner’s outside caliper. Leg length 150 mm. Overall length 1,250 mm, max. opening 180 mm.
48.88
707241
Turner’s inside caliper. Leg length 150 mm. Overall length 1,250 mm, max. opening 180 mm.
42.52
707150
NET
707151
707152
707240
272
$ 28.74
707153
707241
gauges & calipers
HACKLINGER GAUGE
This tool makes the exact measurement of the thickness of stringed instruments possible without removing the top. It is accurate within 0.1mm. Version “A” is for use on violins & violas, Version “B” is for violin cello. The new Version “C” is improved for more general purpose measuring. It is the same size as versions
A & B, the range is from 1 mm to 8 mm. It has 1 magnet only, durable smooth cap - even rough surfaces
or extensive use will not harm the gauge.
no
description
NET
707126
Hacklinger Gauge version “C”, new model. Measuring range 1 - 8mm. 1 magnet.
707127
Hacklinger gauge version “D”. Measuring range 1 - 12 mm. Two magnets.
$ 470.33
516.06
Mini Slide Caliper
no
description
707243
Precision caliper for taking inside and outside measurements on small objects,
models, veneers, etc. Its light weight and compact size make it ideal for measuring
delicate objects. Stainless steel, deep-etched scale with 0.05 mm vernier. Measuring
range up to 70 mm, jaw length 19 mm, weight 23 g.
NET
$ 24.52
707243
ELECTRONIC Caliper
no
description
707170
Measures up to 150 mm, jaw length 40 mm. Measures inside, outside
& depth, with mm/inch option. Stainless steel beam & slide. 5 digit LCD
display. Zeroing switch.
Electronic digital caliper, mesures up to 100 mm.
707258
NET
$ 83.07
707170
67.28
707258
DIAL Caliper
no
description
707259
Sturdy dial caliper with shock- and dust-proof analog indicator. Stainless
steel slide and dial. Accurate to within 0.01 mm. Measuring length 150
mm.
NET
$ 49.65
707259
LARGE CALIPERS (and Parts)
no.
707101
707102
707103
pin head
Violin
Cello
Bass
A
A
A
graduation
opening
NET
0.10 mm
0.10 mm
0.10 mm
200 mm
300 mm
400 mm
$ 296.57
340.99
384.10
no
description
707116
Spare watch for nos. 707101-03
707106
Pin head A (2 parts)
23.52
707107
Pin Head B (2 parts). Pin head A can be replaced by
pin head B, on German calipers only.
18.29
707100
MADE IN USA. Use for violin AND cello! Same
German watch as 707101, etc.
139.70
707105
Small graduating caliper, machined alum. frame. 9”
throat, measures to 30 mm. Dial gauge reads to 0.1
mm. Assembled in USA.
141.95
T50100
Marking calipers
description
707108
For measuring the thickness of top and backs
through the f-holes. Brass. Max. depth 110 mm.
707116
NET
$ 104.75
707105
707106
707107
73.15
“Reinert” Caliper
no
707101
NET
T50100
707100
$ 110.46
707108
www.howardcore.com
273
micro-mesh
KR-70 KIT
(30 square feet)
One each 3”x 6” sheet (2,400, 3,200, 4,000, 6,000, 8,000, 12,000)
One 3”x 3” Foam Block
One 2oz. bottle Anti-static Cream & Wiping Tissues
For restoration of scratched, discolored or damaged fiberglass, acrylics or resins, etc. Colored and
clear acrylics are repaired the same way: sand out the damage with fine sandpaper and then follow
the Micro-mesh series to achieve a high-gloss finish. Kit provides all that is needed to repair minor
scratches, discoloration and surface irregularities.
For deep scratches or holes, resin* and sandpaper* may be necessary in order to do a proper repair
job. Fill holes with resin*, sand smooth with sandpaper*, and polish out with Micro-mesh. * not
included in kit
Kit complete - $ 22.37 NET
Woodworker’s Kit
Two each 3”x 6” sheet (1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12,000).
One 3” Foam Block
For superior finishes on bare hardwoods and wood finishes. Use on bare woods to obtain the
smoothest finish possible. Oil the wood to preserve the finish and protect the wood, then polish
with Micro-mesh to obtain the final finish.
When using on finishes (urethanes, epoxies, resins, etc.), sand the surface smooth with a coarse
grit and polish out with the rest of the series. Polish out all the way to 12,000 for a high-gloss finish or stop earlier for a more subdued finish.
Kit complete - $ 37.64 NET
Hobby Kit
Micro-gloss KIT
One each 3”x 4” sheet
(2400, 3200, 3600, 4000, 6000, 8000).
One 2”x 3” Foam Block.
One 1 oz. bottle Micro-glass
A plastic polish that really works!
• Removes hairline scratches
• Removes haziness and halos
• Produces a high-gloss surface
A small kit designed for a variety of jobs ranging from polishing
wood and golf clubs, cultured marble to acrylics and painted finishes. All of our most popular grits and Micro-gloss to suit a wide
variety of tasks. An excellent starter kit to acquaint you with the
product and just the right size for your workbench. Polishes just
about any surface.
A super polish especially formulated to remove, not hide, superficial
scratches and other light surface damage. Micro-gloss should never be
used on scratches that can be felt with a fingernail. This type of damage
should be removed with Micro-mesh to prevent distortion and assure
total damage removal.
Kit complete - $15.02 NET
The 8-oz. Micro-gloss comes complete with flannel and anti-static
cream.
Kit Complete - $ 23.69 NET
Micro-mesh Regular
For polishing of acrylics, plastic, fiberglass,
epoxy, polyurethane, painted surfaces, gel
coat, varnish, wood and other fine finishes.
Acrylics, automotive finishes, boats, furniture, gun stocks and violins are specific
applications. We are pleased to offer these
cushioned abrasives which are so useful in
the shop. MICRO-MESH is used by many of
the finest violin shops and all highly
recommend it.
274
• Available in the kits shown, you can also
save money by purchasing the various
meshes in 6”x 12” pieces.
• Meshes: 1500, 1800, 2400, 3200,
3600, 4000, 6000, 8000 and 12,000.
1500 is extra coarse, 12,000 is super
fine.
All meshes are same
price:
$ 5.25 NET/FT
The foam block that is
strongly recommended by
the manufacturer is 3”x 3”
and should be used.
$ 2.73 NET
Nail file - 3 grits
$ 1.37
NET
Also available individually:
Anti-static cream - 8 oz.
$ 7.09 NET
Micro-gloss polish - 8 oz. $ 13.80 NET
saws
classic 400 jig saw
no
description
NET
712969
Ergonomic, comfortable shape. Razor-sharp Japanese
“Turbo-Cut” blades. For high-precision and curved cuts.
Blade length 400 mm, dimensions 320 x 700 mm. Weight
approx. 550 g.
712971
Spare Turbo Cut blade
$ 115.62
34.98
712969
COPING Saw
no
description
712512
Chromium-plated steel frame. 125 mm blade length.
Comfortable grip. Comes with one replacement blade.
NET
712513
2 Replacement blades.
$ 23.52
6.54
712512
GLARDON JEWELER’S saw
no
description
NET
712521
Well-constructed jeweler’s saw with 75 mm throat depth.
Swiss made.
712522
Repl. blade - fine (6/0)
6.06
712523
Repl. blade - med. (0)
5.70
712524
Repl. blade - coarse (5)
5.87
$ 60.99
712521
KATABA RESTAURO Saw
no
description
NET
712309
100 mm blade length. Overall length 220 mm.
$ 27.08
712309
HANDIWORK BACKSAWS
These saws provide superb control, making them perfect for precision work. The
rubberized grip fits comfortably in your hand.
no
description
NET
712713
Blade length 135 mm; overall length 270 mm. Thickness
0.25 mm; tooth spacing 0.7 mm.
$ 19.60
712714
Blade length 150 mm; overall length 295 mm. Thickness
0.35 mm; tooth spacing 1.2 mm.
25.66
712716
Replacement blade for #712714.
13.06
712713
712714
DOZUKI UNIVERSAL Saw
no
description
NET
712808
Most popular Japanese saw. Blade length 240 mm, blade
width 50 mm, blade thickness 0.3 mm, tooth spacing 1.5
mm.
$ 54.99
712808
ORDER ONLINE !!
www.howardcore.com
www.howardcore.com
275
gouges
Cello/Bass Gouge
PFEIL COMPACT GOUGE SET
Kirinari Nomi with an extra long
blade. Specifically for the delicate and deep grooving of cello,
bass and guitar necks. Handle:
Japanese red oak without hoop.
Blade length 140 mm
Max. working depth 230 mm
Handle length 175 mm
Overall length 430 mm
Blade thickness 4-5 mm
no.
710098
width
30 mm
no.
description
NET
700691
Six pieces. Overalll length 200 mm. Blade
length 90 mm.
$ 162.24
NET
$ 244.67
Japanese SCULPTURE TOOL
Small Yarri-Kanna sculptor’s tool, all steel, with double-layered laminated blade and knurled handle. For fine work
in cabinetry, instrument and model making, restoration,
and sculpting. Blade length 20 - 35 mm. Handle length
90 mm. Overall length 155 - 165 mm. Blade thickness
approximately 5 mm.
item #
710116
blade shape
Yarri-Kanna
width
9 mm
sweep
-
NET
$ 79.28
Futatsu Wari Moku Hanga To
(wood block Carving Tools)
Professional carving tools for creating detailed contour lines. Laminated HSS-steel blades of exceptional sharpness and edge-holding ability.
The Sakura (cherrywood) handle can be opened to remove the blade for sharpening. Blade length 60 mm; Handle length 85 mm; Overall
length 130 mm; Blade thickness 2 mm.
no.
710730*
710731*
710732*
shape
flat
flat
flat
Skew Chisel
no.
710733*
shape
right
V - Parting Tool
shape
90˚
90˚
Sweep 9
Sweep 9
Sweep 9
Sweep 9
width
1.5 mm
4.5 mm
6.0 mm
3.0 mm
1.5 mm
1.0 mm
* Set, 7 pcs.
no.
710710
276
width
6.0 mm
3.0 mm
1.5 mm
NET
$ 53.92
53.92
53.92
width
6.0 mm
NET
$ 53.92
no.
710739
710734*
710735*
710736*
710737
710738
NET
$ 53.92
53.92
53.92
53.92
53.92
53.92
description
Nos. 710730 - 710736, in
wooden case.
NET
$ 339.68
gouges & chisels
Grooving Gouges
MARU NOMI
(Deluxe
Japanese
scroll
gouges)
Fine Swiss gouges with extended neck and slightly bent, spoon type blade
for concave surfaces and archings, i.e. violin tops and backs. Shaft and blade
forged in one piece from carbon steel, super-finished and polished. Unvarnished
Pearwood handle.
Thin, laminated blades with mirror polished working surface
for the cutting of scrolls and other delicate work in violin
making and sculpturing. Extremely high cutting edge durability is guaranteed. Handle: Pearwood unvarnished, soaked in
linseed oil.
blade length: 60 - 80 mm; handle length: 105 mm
total length: 190 - 210 mm; blade thickness: 2 - 3.5 mm
sweep
no.
5
8
8
5
8
5
8
8
5
6
8
3
6
3
11
3
bevel
outside
outside
outside
outside
outside
outside
outside
outside
outside
outside
outside
outside
outside
inside
inside
inside
NET
$ 77.20
77.20
80.05
80.05
80.05
82.30
82.30
84.63
89.61
89.61
89.61
92.76
99.30
77.20
86.64
82.30
FLAt Chisel
no.
width
715517
7.0 mm
sweep
no.
--
bevel
-------
NET
$ 77.20
Skew chisel
no.
width
715518
12.0 mm
715519
12.0 mm
sweep
no.
---
bevel
right
left
NET
$ 79.69
82.30
no.
715501
715502
715503
715504
715505
715506
715507
715508
715509
715510
715511
715512
715513
715514
715515
715516
width
6.0 mm
6.0 mm
7.5 mm
9.0 mm
9.0 mm
12.0 mm
12.0 mm
15.0 mm
18.0 mm
18.0 mm
18.0 mm
21.0 mm
24.0 mm
6.0 mm
6.0 mm
12.0 mm
Complete set
no.
description
715500 19 pcs. in fine English leather
roll pouch. (You get pouch
and #715501 “free”)
NET
$1,587.37
no.
NET
width
701101
$ 78.32
13mm
701102
88.96
18mm
701103
91.34
30mm
sweep
JAPANESE FLAT CHISELS
(Kirinari Nomi)
These light push chisels are very popular for delicate paring cuts in cabinetmaking, instrument-making and restoration work. Handle: waxed Japanese
red oak without hoop. Blade length 70mm. Handle length 95mm. Overall
length 260mm; blade thickness 3.0 - 4.5mm.
no.
710108
710109
710101
710104
710102
710103
width
3mm
6mm
9mm
12mm
18mm
24mm
NET
$ 79.04
79.04
79.04
82.96
90.80
100.95
SET - 6 pcs. in fine English leather roll. 3–24mm
Item # 710106 $ 525.20 NET
Gouge - Handles
Best unvarnished Pearwood which is very
comfortable and easy on hands, complete
with ferrule.
length: 105mm no.
NET
Ø 35 mm 701601
$ 4.27
Ø 40 mm 701602
4.27
Ø 45 mm 701603
4.27
length: 78 mm
Ø 34 mm 701604
4.27
ORDER ONLINE !!
www.howardcore.com
www.howardcore.com
277
miscellaneous tools
traditional-sTYle hand brushes
Anti-static coconut bristles.
no.
description
706135
Bell-shaped, woven fiber mesh; 110 x 180 mm
706137
Wide, woven fiber mesh; 150 x 120 mm.
NET
$ 12.41
13.25
Endbutton Holder
no.
description
NET
TH20
To hold the endbutton while turning down the shaft. Our
#TH20 has already received great reviews, and is exclusively
ours!
$ 18.00
Inspection Mirror
no.
description
707113
Violin / viola. Straight, but can be bent.
707111
Cello / bass
NET
$ 10.45
14.37
Violin/Viola Holder
Fully adjustable to hold any size violin or viola (except largest) for various repair and adjusting procedures such as fingerboard planing, bridge fitting, top crack repairs, stringing, etc. Padded clamp
screws hold instrument securely but gently. Black anodized aluminum cradle is mounted on clear
plexiglass base. We use these in our shop & highly recommend!
no.
description
NET
T5050
See above
$ 76.35
FULLY ADJUSTABLE VIOLIN WORK BASE
The wooden work base holds the violin firmly in place. This wooden base is attached to a swivel
ball mounted in a metal base that can be attached to the workbench.
no.
description
NET
1624-1
Ball clamp support for wooden form and scroll clamp.
$ 435.25
1624-2
Wooden scroll clamp. To be used with 1624-1, above.
93.75
1624-3
Wooden form for violin. To be used with 1624-1, above.
93.75
1624-4
Wooden form for viola. To be used with 1624-1, above.
120.90
1624-5
Wooden form for cello. To be used with 1624-1, above.
217.75
1624-1
1624-2
Ball clamp support
pictured with violin
form attached.
STRING WINDERS - DRILL ATTACHMENTS
no.
description
707206
For guitar.
ZIPWINDER
For bass.
NET
$ 13.54
19.50
707206
ZIPWINDER
278
bridge tools
BRIDGE FOOT FITTERS
For assisting in fitting the bridge feet to the top of the instrument.
no.
description
NET
T7100
Violin / viola
$ 26.40
T7102
Cello
30.05
T7102
HERDIM BASS STRING LIFTER
no.
description
739503
Designed exclusively for basses.
Top piece is serrated to match any
string configuration.
T7100
NET
$ 195.97
739503
STRING LIFTERS
739501
739502
The String Lifter is an ideal assistant for exchanging, adjusting
and fitting bridges without detensioning the strings. Using the
String Lifter avoids soundpost dropping and helps positioning the
new bridge. The body is made of indestructible fiber-reinforced
plastic with grooved support to match varying sizes. The legs are
lined with elastic pads to protect the varnish of the instrument.
no.
description
NET
739501
Violin 1/16 - 4/4; Viola 395 mm
$ 25.06
739502
Cello 1/8 - 4/4
34.44
Bridge Marker
no.
description
707000
Marks string divisions on
bridge, 4/4 cello to 1/8
violin.
NET
$ 55.85
Bridge Leg ExpandeR
To simulate string tension when fitting cello bridges.
no.
description
706900
Solid brass
706901
American made, lighter weight
NET
$ 31.50
9.60
706901
706900
ALL TOOL PRICES
ARE NET!!
ORDER ONLINE !!
www.howardcore.com
www.howardcore.com
279
soundpost tools, inspection lights
SOUNDPOST TOOLS
no.
description
NET
1 700100
5-notch, stainless steel. Violin.
2 700101
Violin, nickel-plated, American made
3.75
Cello, nickel-plated, American made
17.60
700101-C
3 700103
700113
9 700108
700109
Cello, chrome-plated.
Violin/cello, American made, scissors-style.
8.70
Soundpost retriever, to pull out loose soundpost, for violin.
7.65
Soundpost retriever, cello
9.45
Herdim soundpost setter, hand forged from
old English design, rounded edges, finest
workmanship, superbly balanced.
63.72
11 700118
Herdim Duo soundpost setter, double-layered
head, nickel-plated. For violin/viola.
20.00
Same as #700118 above, but for small sizes
violin (1/8 - 3/4 sizes)
10.50
Scissor-style, brass - violin & viola.
12.50
12 700105
2
DISCONTINUED
31.08
10 735900
700114
9
$ 36.00
DI
10
SC
ON
11
TIN
UE
D
1
3
12
HERDIM FORTE SOUNDPOST SETTERS
Stainless steel with rounded edges. Stiff, yet still bendable. Traditional, English-style head is ideal for making fine adjustments in the
postion of the soundpost. Excellent tapping power due to the hefty head, whose rounded flanks prevent soundpost damage.
no.
700122
700123
700124
description
Violin / viola
Cello
Bass
NET
$ 20.00
35.41
42.74
700122
700123
700124
Soundpost Gauge
hill SELF-SUPPORTING violin lamp
Fits through f-hole to measure the internal distance between top and back.
Comes with AC adapter (no batteries!). Will mount in any
f-hole or endpin hole. Replaceable bulb.
no.
700110
700111
description
Violin & viola
Cello
NET
$ 8.70
11.90
no.
708008
NET
DISCONTINUED
$ 35.00
description
see above
BEND - A - LIGHT
High intensity light tool with a flexible shaft which puts the light
where you need it. The lens gives a brilliant, diffuse light which is
ideal for illuminating the interior of violins or other instruments.
Complete with extension cover and two batteries.
•length: 400 mm overall with 250 mm flexible shaft
•max. diameter of the shaft: 5 mm
•weight including batteries: 60 g
MINI FLEX LIGHT ULTRA
Small pocket-sized flex light with
bright light and ultra-flexible shaft.
Very useful. Uses two AAA batteries
(included). In case.
no.
708013
708016
280
description
see above
Replacement
bulb
no.
708001
708002
NET
$ 33.37
5.64
708004
708005
708006
description
BEND-A-LIGHT
Replacement
lamp
Large Bend-A-Light for cellos & basses
“Krypton-Pro”
Replacement lamp for “Krypton-Pro”
Replacement switch - fits both sizes
NET
$ 21.00
6.25
35.00
13.95
4.00
clamps
BERNA Carbon Clamp - Featherweight model
no.
depth
opening
weight
NET
705730
70 mm
40 mm
10 g
$ 6.71
705731
70 mm
160 mm
11 g
8.43
705732
70 mm
210 mm
12 g
9.62
705732
C - Clamps
no.
description
NET
705910
Strong steel clamp, ideal for cello and double bass linings. Opening 17 mm, depth 30 mm, weight 41 g.
$ 8.20
T-BC01
Depth 90 mm, opening 25 mm. Double swivels, great
for bass bars!
20.00
T-BC02
Depth 110 mm, opening 40 mm. Double swivels, great
for bass bars!
25.00
T-BC01
705910
T-BC02
FINGERBOARD PADS
no.
description
NET
735810
Rosewood clamping forms to be placed on the top of
the fingerboard and the bottom of the neck when gluing
the fingerboard to the neck. Set.
$ 7.95
735811
Same as above, for cello.
14.13
JAPANESE MODEL MAKER CLAMPS
Slender brass clamps for gluing delicate work.
no.
737005
737006
737012
description
5”
6”
12”
NET
$ 11.25
11.75
13.10
737005
737006
737012
www.howardcore.com
281
clamps
bessey solid steel bar clamps
Forged, hardened arm is sturdy yet suprisingly compact and lightweight. Accurately machined bar and arm and hardened threads
allow high precision clamping. Perfectly flat, ball-jointed swivel pad, galvanized arm, coated thread, wooden handle.
no.
depth
opening
weight
NET
705778
50 mm
100 mm
190 g
$ 21.85
705779
50 mm
300 mm
280 g
28.44
705780
60 mm
120 mm
300 g
27.62
705781
80 mm
160 mm
500 g
33.19
705782
100 mm
200 mm
850 g
44.42
705783
120 mm
250 mm
1300 g
53.68
705784
120 mm
500 mm
2200 g
82.96
705785
120 mm
1000 mm
3500 g
118.89
705790
Protective strips (2) for Bessey clamps #’s 705780-2
705785
705779
705781
10.81
705778
Photos not to scale
Mini - clamps
705790
Light aluminum clamps, screws have gunmetal finish,
plastic pads. 1 each: 25 x 32 mm, 30 x 43 mm, 37 x
56 mm.
no.
description
705721
Set of 3
NET
$ 14.72
Crack Cleating Clamp
Extremely light aluminum clamp for cleating cracks.
Screws brass, swivel with ball bearing (highly mobile).
depth: 125 mm, opening: 55 mm, weight approx: 75 g.
no.
NET
705722
$ 35.28
Repair Clamps, Aluminum
Light but strong clamps made of cast aluminum alloy. The foot
is slightly elevated to concentrate the pressure and to work on
concave surfaces. Steel rod with freely movable swivel in ball
bearing.
no.
depth
opening
weight
705890
95mm
35mm
110g
$ 28.74
705891
120mm
40mm
120g
31.06
705892
160mm
40mm
220g
35.28
705893
200mm
50mm
290g
37.59
705894
Set, 5 pcs., 1 ea. 705890/92/93, 2
x 705891
282
152.86
705892
NET
705890
705891
705893
clamps
“HERDIM” Repair Clamps
The finest professional clamps for musical instrument repair, furniture restoration, pattern making and other delicate clamping tasks.
7
Hand forged steel clamps of high stability and low weight, give well-defined pressure
on the parts to be glued. High-pitch rods for fast closing action. Freely mobile brass
swivels on ball bearings. All parts galvanized or made from corrosion free, non-staining
material.
3
4
5
6
7
8
1
2
no.
735714
depth opening
40 mm 35 mm
735715
735702
735704
735707
90 mm
85 mm
135 mm
205 mm
735709
735711
50 mm 80 mm
150 mm 80 mm
735713
300 mm 80 mm
735719
735718
35 mm
45 mm
45 mm
45 mm
22 mm 12 mm
27 mm 15 mm
weight application
40 g crack-cleating, edging, f-holes,
ribs
80 g crack-cleating, ribs
125 g crack-cleating
235 g bass bar, violin, viola
330 g crack-cleating cello, fingerboard guitar
110 g fingerboard violin/cello
255 g top/back (plaster repair
method)
700 g crack-cleating bass, top/back
cello (plaster repair method)
11 g micro size clamp
18 g micro clamp
6
4
NET
$ 29.87
5
2
8
32.67
39.19
40.03
50.30
3
1
Parallel Clamp
47.04
62.06
Strong steel clamp.
Opening 28 mm, depth 50 mm.
69.24
no.
NET
705723
26.13
27.43
$ 18.00
“HERDIM” Crack Clamps
Made for violin, viola, cello and bass.
The new HERDIM Crack clamp has all the features professional stringed instrument repairers have waited for:
• Adjustable, preset working length for quick, versatile use; only 2 sizes cover all applications
• Twisting pad with convex and concave side to adapt to the contour of the instrument.
• Double rod for high specific strength and flexibility.
• With two sliding jack screws for leveling the crack without wedges.
No. 735847 has two sides for repairing a top which has been removed
(pressure can be equalized both above & below.)
No. 735848 & 735849 clamp between “F” holes.
no.
description
length
NET ea.
705835
Violin/viola
280 mm
$ 49.65
705836
Violin/viola
180 mm
49.65
705838
Cello
300 mm
75.78
705846
Cello/bass
500 mm
81.00
705845
Bass
880 mm
81.00
735847
Violin/viola w/ top removed
280 mm
99.77
735848
Violin/viola between the f-holes.
155 mm
49.65
735849
Violin/viola between the f-holes.
100 mm
49.65
735850
Better pressure distribution for repairing
edges. 240 mm opening.
705838
735849
705835
735847
109.99
735850
www.howardcore.com
283
clamps
Clip Clamp
Top Clamp
Steel, zinc plated, extra strong spring.
Length 110 mm, opening 40 mm.
For gluing down the top underneath the fingerboard. Machined aluminum. Protective
lining.
no.
no.
NET
705861
$ 5.87
NET
705820
Violin and viola
705821
Cello
$ 45.45
53.85
Fingerboard Gluing Clamp
Edge Clamps
no.
For edge repair.
705870
705855
Brass; 2 brass screws; depth
15mm, opening 12 mm.
no.
NET
705855
705856
Brass; 1 brass screw; depth
18mm, opening 15 mm.
NET
705856
$ 18.24
no.
T-2700
NET
T-2700
A truly genial clamp for gluing back loose ribs to the lower block without
opening the instrument. After the pivot is inserted through the end pin hole,
the rod turns by gravity into the cross position. The pad, made from rubberlined hardwood, has two archings to adapt to different shapes.
Simple, time saving and functional!
Brass. Precisely machined.
no.
$ 5.00
“HERDIM” End Pin Clamps
$ 22.57
no.
NET
Plastic. For violin,
viola and cello.
$ 65.00
NET
735800
Violin
$ 13.90
735801
Cello
26.25
Crack Clamps
no.
description
T2100A
Edge clamp - draws cracks together at bottom edge; American made.
$ 37.00
T-46017
Most precise clamp cut from titanium &
brass – only half as heavy as all brass but
more stable! Four screws for best clamping.
Exceptional quality.
147.13
T-46017-B
Like above, for bass.
196.15
Repair Clamps
4 parts, straight steel-tension rods
with polyamid cramps; flexible.
no.
NET
705830
Violin
$ 42.65
705831
Cello
72.60
705832
Bass
72.97
NET
VIOLIN PANEL CLAMP
Traditional clamp for gluing 2-piece
tops & backs of violins in a warpfree manner. Wooden screw allows
clamp to be set quickly & accurately. Clamping arms confrom to the
shape of the wood being clamped.
Max. opening 350 mm; board width
28 mm. Made of high quality hardwood.
no.
705750
284
NET
$ 108.14
T-2100A
T-46017
ORDER ONLINE !!
www.howardcore.com
clamps
“HERDIM” Assembly Clamps
Gluing the table to the ribs of stringed instruments is a delicate
procedure because of the risk of pressure marks and edge chipping.
HERDIM Assembly Clamps are
designed to eliminate that danger.
Their pads go over the ridge of
the edge of the violin or cello and
exert pressure exactly where it is
needed - directly over the rib to
avoid any damage to the edge.
Because of the precise application
the necessary clamp pressure can
be considerably reduced, compared to conventional clamps. The
material used is glue repelling, non-aging and elastic to avoid pressure marks. The pads are parallel pin guided in a mortice for fast
closing action.
Violin / Viola
735601
735602
735603
735600
depth
opening
705801
30mm
30mm
$ 10.90
705802
50mm
30mm
10.90
NET
705803
80mm
30mm
10.90
$ 14.37
14.37
14.37
433.75
705804
100mm
30mm
10.90
705800
Set: 4 pcs. (no. 705801-04)
color
Blue
Red
Yellow
Set - 32 pcs. (blue - 20; red
- 8; yellow - 4)
Fit through the f-hole for cleating cracks without removing the
top. Stainless steel profile, steel screw, gun metal finished,
leather padded.
no.
pads:polyurethane, brass bushings
rod: steel, galvanized
nut: brass
no.
f-Hole Clamps
NET
43.40
Cello
Precision clamps for cello assembling and repair. Similar to violin
version but, due to higher load requirements, the jaws of the cello
clamps are made from fiber-reinforced plastic. Herein elastic pads
are inserted for an ideal synthesis of strength and surface protection
without adding to the weight. The rod is mantled by a silicon tube to
protect the edges of the instrument.
pads: fiber reinforced polyamide, brass bushings
rod: steel, galvanized
nut: brass
no.
color
735631
735632
735633
735630
Blue
Red
Yellow
Set - 42 pcs. (blue - 28; red
- 8; yellow - 6)
NET
$ 20.54
20.54
20.54
808.71
herdim rib corner repair clamps
For re-gluing rib corners. Allows precise pressure to be applied
directly to both sides of the rib corner.
no.
NET
735610
Violin/viola. Opening 50 mm,
4 spindles.
735615
Cello. Opening 150 mm,
6 spindles.
735621
Clamp body, without assembly
clamps. Includes 2 knurled nuts
$ 123.05
156.59
28.62
herdim LATERAL CLAMP SPINDLES
The ideal device for applying lateral pressure to the rib area,
e.g. for leveling and properly aligning cracked ribs. To be used
in conjunction with Herdim Assembly Clamps, above. Spindle
with adjustable clamping pad and two locking screws.
no.
735605
735610
NET
735615
$ 27.08
735621
www.howardcore.com
285
clamps
Gluing Clamps
no.
NET/ea.
705704
Cello & guitar
705705
Bass
$ 43.55
43.55
705706
Violin
$ 6.83
705707
Cello
8.05
705708
Bass
16.48
705706
705705
Gluing Clamp Sets
Hardwood pads with rubber lining.
no.
NET
705700
Violin, 6 parts
705701
Cello, 6 parts
$ 205.57
339.72
Wood Screw Clamps
Individual wood screw clamps,
leather pads, nickel plated rod.
no.
T2110AV
NET
Violin / viola
$ 1.85
T2110AC
Cello
3.15
T2110AB
Bass
7.40
3-Way Clamp for Violin
Light weight machined aluminum clamp for gluing top down on
violin or viola. Swiveled, leather padded tightening screws on top
and bottom. Side screw used to properly position rib in case of
bulging.
no.
T5011
NET
$ 14.70
Patching Clamp
RESONATOR CLAMP
Lightweight machined aluminum,
black anodized finish. Four inch
throat with leather padded swivels.
For gluing the resonator.
no.
PC1500
no.
NET
735765
$ 89.08
NET
$ 21.55
286
patterns, forms & purfling tools
Purfling Groove Cutter
Precisely machined from a solid brass bar.
no.
description
NET
702522
0.5mm blade, precision adjustable.
702523
Set of two blades for 702522
23.52
700603
American made with rosewood
handle, Ibex.
38.55
700604
Set of two (2) replacement blades
for #700603.
$ 192.05
700603
702522
9.30
Purfling Channel Cleaner
no.
description
NET
700605
With wooden handle, American made.
$ 8.05
700606
Hardened & polished steel, German made.
16.48
700606
700605
Patterns
no.
description
T43
Graduation and outline diagram.
NET
$ 1.25
Specify Strad. or Guarneri model.
T44
F-hole pattern, PVC.
T4921NB
5 .00
T45
F-hole pattern, brass.
62.00
T4921N
T4921NB
Neck pattern, PVC.
7.35
Neck pattern, brass.
62.00
T4924
Body pattern, PVC.
3.80
STRAD
T45 GUARNERI
T4921BB
Body pattern, brass.
70.27
T4919
T49
Neck angle gauge.
Complete form, wood.
T4921BB
9.20
165.33
T 4919
T 49
herdim bridge/fingerboard patterns
Precision patterns with tapered spurs at base of bridge
patterns for gauging string height. 6-piece set for vln,
vla, & cello. 0.5 mm thick stainless steel. Sizes according
to Hans Weisshar.
no.
739400
NET
$ 77.08
ORDER ONLINE !!
www.howardcore.com
www.howardcore.com
287
f-hole drill & bending iron, bowmaker tools
F HOLE DRILL
The ideal tool for cutting perfectly cylindrical f-holes. Centered drill bit with beechwood handle. Ten interchangeable double beveled drill bits. Set complete with all
bits.
no.
description
NET
701110
Violin / viola. Bits Ø: 5.5 / 6 / 6.5 / 7
7.5 / 8 / 8.5 / 9 / 9.5 / 12mm
701109
Cello. Bits Ø: 12 / 12.5 / 13 / 13.5 / 14 / 18 / 18.5
/ 19 / 19.5 / 20 mm
701110
$ 118.89
147.63
Bending Irons
Universal bending iron for violin, viola, cello & guitar. Rheostat control.
Cast aluminum oval shape, mounts horizontal or vertical.
no.
description
T105
Universal bending iron for violin, viola, cello & guitar. Rheostat control. Cast
aluminum oval shape, mounts horizontal or vertical. 110V, 200W. 4 lbs.
$ 156.65
NET
703912
Bending straps for use with T105, above. Violin / viola. For pressing the
ribs against the bending iron. Made of highly flexible, 0.3 mm thick stainless
steel fitted with a wire handle on each end. 50 mm x 320 mm.
31.35
703913
Bending straps for use with T105, above. Cello / guitar. 125 mm x 460 mm.
65.32
T 105
SEE MORE BENDING IRONS FROM GEWA IN THE FRONT OF THIS TOOL SECTION!!
Bowmaker - Chisels
Special flat mortice chisels with short blade (50 mm) and
tapered cross-section for the head and frog cavities of bows
with pearwood handle.
no.
size
NET
701501
2 mm
$ 31.06
701502
3 mm
31.06
701503
4 mm
31.06
701504
5 mm
31.06
High grade Swiss carbon steel, superfinished & polished.
Hardness 6 HRC.
Tools for Bow Tips
Aluminum. For violin, viola and cello.
no.
description
NET
705305
Bending clamp
$ 77.20
706306
Gluing device
112.83
705305
706306
Bow Rehairing Tools
no.
description
706301
Set of three parts
NET
$ 117.11
Bow rehairing clamp
no.
description
706302
Wood, holds bow securely while rehairing
all size bows.
288
NET
$ 48.00
bow maker tools
250 GRAM SCALE
120 GRAM SCALE
no.
description
NET
M120Z
Violin, Viola & Cello Bow Scale
Measures from 400 grams down to 0.1
grams. Cover serves as convenient
tray!
$ 29.70
no.
description
NET
JS250
Bass Bow Scale. Measures from
300 grams down to 0.1 grams.
$ 39.00
JS250
M120Z
Great for
weighing bows!
herdim hair gAUge
HORN BOW HAIR COMB
For measuring the precise amt. of hair needed for tying
a given hank. Stainless steel w/ slit & graduation scale.
Suitable for all size hanks.
Combing bow hair prior to use helps guarantee that the
hair in the hank remains straight and parallel. These
combs have cleanly cut teeth and are made of natural
horn. Overall length 90 mm.
no.
NET
739410
$ 19.60
no.
comb length (toothed portion)
NET
739411
50 mm
$ 6.54
739412
85 mm
7.84
739411
739410
739412
ORDER ONLINE !!
www.howardcore.com
www.howardcore.com
289

Tools - Howard Core Company

Transcription

Similar documents

800 Bademeister im Dienst - Herzlich Willkommen bei Ihrer

234 Or maybe even the Copenhagen Opera House! We supply