Sitech Catalog

Transcription

Sitech Catalog

PRODUCT CATALOG
The Tools to Revolutionize Your Construction Workflow
Comprehensive Site-Wide
Construction Technology Systems
Connected
Worksite
Solutions
www.sitechsw.com
www.sitechsw.com
Innovative solutions improve productivity at all stages of
the construction workflow, making you more competitive.
They are rugged, easy-to-use, fully upgradeable, flexible
and expand as you grow your business—maximizing your
return on your investment.
or visit
602-437-0410
www.sitechsw.com
please call SITECH Southwest at:
For more information or pricing on the products listed in this publication,
TABLE OF CONTENTS
Training and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SCS900 Site Controller Software. . . . . . . . . . . . . . . . . . . . 4
SPS 3D Hardware Solutions. . . . . . . . . . . . . . . . . . . . . . . . 5
GNSS Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Business Center – HCE . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
GCS900 3D Grade Control Systems . . . . . . . . . . . . . . . . 10
CCS900 3D Compaction Control System . . . . . . . . . . . . 11
Productivity Comparison. . . . . . . . . . . . . . . . . . . . . . . . . 12
GCS900 Features and Benefits . . . . . . . . . . . . . . . . . . . . 13
GCS600 2D Grade Control Systems . . . . . . . . . . . . . . . . 14
Paving Control Systems. . . . . . . . . . . . . . . . . . . . . . . . . . 15
GCS Flex Grade Control System for Excavators. . . . . . . . 16
Spectra Precision Laser Grade Control. . . . . . . . . . . . . . . 17
Laser Levels; Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Laser Levels; Single and Dual Grade . . . . . . . . . . . . . . . . 19
Grade Control Systems; Basic. . . . . . . . . . . . . . . . . . . . . 20
Pipe Lasers and Accessories. . . . . . . . . . . . . . . . . . . . . . . 21
Optical Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Interior Laser Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Tripods, Prism Poles, and Locators. . . . . . . . . . . . . . . . . . 24
Rods and Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Trimble Agriculture Solutions. . . . . . . . . . . . . . . . . . . 26-27
Building Layout Products. . . . . . . . . . . . . . . . . . . . . . . . . 28
VisionLink Site Management Solutions . . . . . . . . . . . . . . 30
2
Your Construction Technology Provider
2
...you need equipment with the versatility
to perform efficiently on any jobsite.
SITECH
Mesa-based SitechTM Southwest
is Arizona’s premiere provider of
high-tech solutions for construction,
mining and agriculture. As an
authorized dealer for Trimble®,
Caterpillar® and Spectra Precision®
grade control and technology
products, Sitech provides sales
and support of GPS systems, laser
levels, construction lasers, optical
instruments, grade control systems,
surveying and engineering software,
and accessories throughout Arizona,
southeast California and northern
Mexico.
Training & Support
Sitech Southwest is a certified and preferred service authorized Trimble repair center. Our repair center technicians have
over 25 years of experience with various manufactures of laser and GPS technologies. Our staff is friendly,
courteous and willing to help ensure our client’s needs are taken care of and are priority one.
Our highly trained in-house technicians can service, repair and calibrate Trimble, Caterpillar and Spectra Precision grade
control systems and instruments, including 2D and 3D Grade Control Systems, Robotic and Standard Total Stations, Pipe
Lasers, Rotating Lasers, and other positioning and grade control technologies. In addition to our core products, we can
also service and calibrate products from other manufacturers. Our turnaround time is among the best in the industry.
We offer on-site installation, training, and troubleshooting for your Trimble, Spectra Precision, and Caterpillar Grade
Control Systems. Our field and service technicians are highly experienced with integrating our systems into all makes
and models including Caterpillar, John Deere®, Volvo®, Komatsu®, CASE IH®, Challenger®, Massey Ferguson® and more.
3
For more information or pricing on the products listed in this publication
please call SITECH Southwest at 602-437-0410 or visit www.sitechsw.com
3
SCS900 Site Controller Software
Trimble Site Positioning Systems are designed
to provide contractors with state-of-the-art
construction positioning solutions. Trimble SPS
provides the non-surveyor in site preparation,
heavy/highway, mining, landfill and waste disposal
industries the ability to quickly resolve problems
on site and the flexibility to complete any task.
Contractors can track, report, validate and control
workflows from receipt of initial designs to project
completion.
Central to the system is your positioning sensor
hardware. You can use either GPS or total stations.
These can be combined with the Trimble SCS900
Site Controller Software developed specifically for
construction applications.
With Trimble Site Positioning Systems, you will
simplify your operations, increase your efficiency
in the field, and minimize your downtime at every
stage of the project.
Trimble Positioning
System Applications
With Trimble Site Positioning
Systems, you can perform a wide
range of site positioning and
measurement applications. Site
foremen, supervisors, grade
checkers and site engineers now
have the tools to help run the
machines on site, to reduce
downtime and resolve issues
as they arise without office
assistance.
Site Control
operations
General site
measurements
The Trimble Site Positioning
Systems allows you to calibrate the
jobsite for GPS operations, and to
record existing and establish new
control points in convenient
locations for total station
operation or daily GPS check
shots.
Position and record the location
of features on-site, such as power
lines, utilities, manholes, pipe
inverts and existing structures.
4
4
Trimble tablet
The Trimble Tablet is an integral
part of the Trimble Connected Site®
construction solutions. The rugged,
easy-to-use handheld computer
with built-in connectivity provides
construction jobsite supervisors,
foremen, site engineers, grade
checkers, construction surveyors and
project managers the ability to make
changes in the field, connect to the
office, and make decisions faster.
SPS 3D Hardware Solutions
Trimble SPS Series GNSS Receivers
Trimble
SPS882 GNSS
Smart Antenna
Trimble SPS852 GNSS
Modular Receiver
Integrated unit includes GNSS receiver,
antennas, radio and battery.
Mounting flexibility and
added security.
Trimble SPS Series Total Stations
Trimble SPS630,
SPS730, SPS930
Universal Total
Stations
Flexible total stations
for site positioning and
machine control operations.
Trimble SPS720 and
SPS620 Universal
Total Stations
Progress Volumes
Measure your site or material stockpiles to create
surface models for the computation of volumes.
Volumes can be computed simply within a
bounded area or between two surfaces. e.g.:
original ground and current or between current
and finished design.
Robotic Total Station for Site
Positioning Applications for a
very economic price.
Trimble Controllers and Software
Stakeout
Trimble TSC3
Controller
Trimble Tablet
Rugged and waterproof computer with powerful
processing and connectivity wherever you are.
Advanced handheld
controller with easy-to-use
interface for a range of site
positioning applications.
Use the Site Positioning System to accurately
stake out points, lines, alignments, and surfaces.
Navigate using the real time map, select the
stakeout feature from the live map and display
cut/fill to get grade.
As-Built Site Measurement
Trimble TCA1
with SCS700
Controller Software
Optimized field software for
site inspection applications.
For site measurement and stakeout
operations.
Carry out as-built site measurements for client
submission and approval at the end of the project.
Produce high-quality reports and improve your
reputation with the client.
5
GNSS Solutions
Innovation from the leader–
designed for your construction
site operations
GNSS Solutions
Trimble GPS systems are guided by the powerful
Trimble RTK engine. Stronger signal acquisition from
more satellites–including GLONASS and modernized
GPS– means you can run faster, longer and without
interruptions.
Future-ready, now
Trimble site positioning systems support all currently
available positioning constellations including
OmniSTAR, SBAS, GPS and GLONASS signals and
will track the modernized GPS L5 signal when it
becomes available. You won’t have to invest in
new systems to take advantage of the latest signal
capabilities.
Options that grow with you
Trimble GPS systems are designed to meet the
specialized needs of the construction industry. You
can choose among a range of options to suit your
individual applications, flexibility and performance
requirements.
Advantages of satellite positioning
Using satellite positioning signals from the currently
available GPS and GLONASS satellites and all
available correction systems, the Trimble Site
Positioning System GPS receivers are well-suited
to work anywhere that has a clear line of sight to
the sky. Real-Time Kinematic (RTK) GPS delivers
centimeter level (0.03) accuracy–even when you’re
on the move–making it well suited to on vehicle
or machine operations. RTK GPS technology can
provide accurate positions at long distances from
the base station, so most construction sites are
covered from a single set-up location.
6
6
Internet-Enabled Base Stations
The Trimble SNM910 cellular modem is designed
specifically to connect a Trimble base station to
the internet. This allows a single base station
to extend precise GNSS coverage to remote or
off-site projects such as borrow pits, dump sites
or other projects within an 18 mile range and
provides more flexibility for the setup of GNSS
infrastructure on large projects.
SMART VS. MODULAR RECEIVERS
The Smart GPS Receiver concept gives you everything you need in one single unit (SPS882). The
Smart GPS Antenna is your ideal configuration
for rover systems mounted on a rod or supervisor
vehicle and allows for fast daily set ups as a
base station.
The Modular GPS Receiver (SPS852) can be used
as either a base station or a rover and provides
the flexibility to be configured for your specific jobsite needs. It’s modular design allows you to leave
the receiver and radio secured in the site trailer, or
vehicle, while only the antenna is exposed.
SPS852 Applications
• Permanent and semi-permanent
base station installations
• Site supervisor vehicle-mounted systems
• Pole or ATV-mounted stakeout and
measurement applications
• Vessel-mounted marine RTK systems
• Marine survey and construction vessel
operations on dredges, cranes and piling rigs
Trimble
TSC3 Controller
SNM910
on a SPS852
Trimble Tablet installed in a Truck
7
7
Business Center – HCE Powered by Trimble
The Ultimate Data Management System
Business Center - Heavy Construction Edition (HCE) from Trimble is the only office software you need to manage, analyze
and process site and highway construction data. With powerful tools to help control data between the office and the field,
you can easily combine and manage data from multiple sources to generate accurate, integrated results, and then share
these results with the entire project team. Business Center - HCETM can help you decrease costly mistakes and increase
productivity in the office and on the construction job-site.
It’s Easy To Get Started
Begin with the free Core Product, which makes managing data for 3D machine control and site positioning systems easier
and more seamless than ever before. Then contact your SITECH Technology Specialist for information about additional
modules to extend the software’s functionality, or to schedule a solution demonstration.
Visit www.sitechsw.com to request a free CD.
6 Modes of operation adjust the menu
items and icons to meet different user
requirements
Project
explorer and
view filter
manager
provides
rapid access
to display
and selection
controls
Interactive
views update
immediately in
line with data
model changes
Multiple view
and multi-screen
environment
shows plan,
profile, cross
section, 3D, 3D
drive through,
and spreadsheet
views
FREE
30-DAY TRIAL
Powerful 3D view and 3D drive through views allow
for rapid model error identification and correction
directly from the 3D view
8
8
Try all the Business Center—HCE
modules FREE for 30 days.
Visit www.sitechsw.com
to request a
free CD.
Modular Software Designed to Grow with Your Business
Whether you are a small site contractor or manage large projects,
Business Center – HCE offers modules to meet your needs.
TAKEOFF MODULE
• Create and maintain a materials and site
improvements library
• Heads up digitizing from images and PDF
files or digitizing from paper plans
• Assignment of site improvements, topsoil
stripping and replacement areas
• Creation of subsurface strata and drillhole
data entry for subsurface earthen material
strata models
• Accounting for over excavation to achieve the
specified density beneath structures
• Create Areas of Interest
• Takeoff reports include all material volumes
lengths and counts, plus cost information
IMAGE MANAGER MODULE
• Import digital image files and PDF plans and
sections
• Georeference image files to scale and location
• Provide background for heads up digitizing
of plans
• Drape image over surface for checking digitization
• Publish image and digitized data to Google
Earth™ and Connected Community
ROAD TAKEOFF TOOLS MODULE
• Digitize cross-section drawings from a raster
image or a PDF file
• Supports raster PDF, JPEG, TIFF or PNG files
• Store cross-section objects in association with an
alignment object
CORE PRODUCT
• Fully supports Trimble SCS900 Site Controller
Software, Trimble GCS900, PCS900 and
CCS900 Machine Control Systems, and Cat
AccuGrade data creation and processing
• Plan, profile, cross section, 3D and
spreadsheet views
• Generation of numerous reports
DATA PREP MODULE
• Clean up imported CAD data
• Advanced CAD tools (trim, extend, offset lines)
• Automated high productivity elevating tools
for imported CAD data
• Elevate contours, pads, lines and points
• Advanced surface modeling and editing tools
for site projects
SURFACE TOOLS MODULE
• Automated surface edge breaklines
• Creation of surface boundaries - holes and islands
• Surface densification of corridors
• Alignment based surface models
• Uncompacted PCS surface model for paving
• Material texturing of surfaces
• 3D Alignment based
drive through
• Superelevations and subgrades
for corridor models
• Merge surface models together
• Drape lines over surfaces
• Create symbols to scale on points
imported from SCS900
9
9
GCS900 3D Grade Control Systems
GPS Flexibility
UTS Precision
The Trimble GCS900 on a motor grader with single GPS is a full 3D control system
that puts the site plan–design surfaces, grades and alignments–inside the cab.
The Trimble GCS900 Grade Control System with the Trimble SPS930 or SPS730
Universal Total Station is ideal for projects where high-precision grading is
Trimble GCS900 Grade Control
System with GPS:
Blade control accuracy under ±2.5 cm*
The Trimble GCS900 on a motor grader with Single GPS is ideal for contractors
who require a cost-effective, 3D grade control solution for site preparation and
bulk earthworks. The Single GPS option is easily upgradable to Dual GPS or UTS
systems as job-site requirements change. GPS-based Grade Control Systems are
ideal for larger site projects and long-term, multi-phase projects.
Applications:
• Motor graders, dozers, excavators and scrapers
• Roads and highways
•
•
•
•
•
•
•
Large earthmoving projects - dams, reclamation, etc.
Landfills and waste deposits
Commercial site prep - complex design
Commercial site prep - pads, grading for large slabs, etc.
Residential site prep
Subdivisions - pads, local infrastructure
Land reclamation projects
• Golf course construction
• Railway construction
Trimble GCS900 Grade Control System
with Universal Total Station:
Blade control accuracy to 1 cm*
required, or for jobs where GPS signals may be obstructed. UTS systems allow
contractors to move from site to site quickly and easily. The Trimble GCS900 system with UTS is a full 3D control system that puts the site plan - design surfaces,
grades and alignments - inside the cab. A motor grader or dozer can be quickly
changed from GPS to UTS as site requirements demand.
Applications:
• Motor graders, excavators, and fine grading dozers
• Roads and highways - fine grading
•
•
•
•
Airport construction - runways and tarmacs
Commercial site prep - complex design
Commercial site prep - pads, grading for large slabs, etc.
Subdivisions - pads, local infrastructure
• Underground utilities
• Golf course construction
• Railway construction
Dual Antenna or Single:
The dual GPS antenna configuration is unique to Trimble's GCS900 Grade Control
Systems. Using two GPS receivers we measure the exact position of the blade on
both sides. This is especially advantageous for complex design surfaces such as
super-elevation grading, and steep slopes.
*overall accuracy can be affected by external influences such as blade wear, worn
shims, and improper setup
10
CCS900 3D Compaction Control System
CCS900 Compaction
Control System
The Trimble CCS900 Compaction Control System
enables the contractor to accurately control the
compaction process, while reducing unnecessary
passes that result in over compaction. The system
achieves compaction density faster, more accurately,
with less rework. The early detection of subsurface material anomalies means that soft spots
and hidden obstructions can be excavated and
re-graded or compacted prior to the more costly
phases of the construction process such as paving.
Compaction results are recorded and stored
for analysis and generation of documentation
deliverables at the end of the project.
11
Productivity Comparison
Motor Grader
Productivity estimation of CAT 140H with 3.77m blade for road construction, semi-skilled operator.
T= (N x D) / (V x E)
without
GCS
with
GCS
5
1
3
0.65
2.56
3
1
3
0.8
1.25
N: Number of trips or passes
D: Working distance (kn) V: Working speed (km/hr) E: Job efficiency
T: Working time (hr) An increase of 51% in productivity
Bull Dozer
Productivity estimation of CAT D6R II with 5/6m3 semi U blade for bulk
earthmoving works, semi-skilled operator.
Q = q1 x a x (60/Cm) x e x E
without
GCS
q1: Blade capacity of machine (m3) 5.6
a: Blade fill factor
0.8
Cm: Cycle time in minutes
7
e: Grade factor
0.9
E: Job efficiency
0.65
Q: Hourly production (m3/hr)
22.46
with
GCS
5.6
0.8
6
0.9
0.8
32.26
An increase of 43.62% in productivity
Excavator
Productivity estimation of CAT 320D with 0.9m bucket for trench digging works,
semi-skilled operator.
Q = q1 x K x (3600/Cm) x E
without
GCS
q1: Bucket capacity of machine (m3) 0.9
K: Bucket fill factor
0.9
Cm: Cycle time in seconds
20
E: Job efficiency
0.65
Q: Hourly Production
94.77
with
GCS
0.9
0.9
18
0.8
129.6
An increase of 36.75% in productivity
12
GCS900 Features and Benefits
Trimble GCS900 Grade Control System:
Top advantages over other after-market systems
Finish faster with fewer machines
It’s the only GPS system that lets you run at higher speeds without losing accuracy. Faster data transfer, linear receivers, faster valve
response and more robust components allow you to finish projects faster.
Auto Side Shift Option for Motor Grader – Trimble Exclusive
The Auto Side Shift option is ideal for grading linear sections such as curbs, centerlines, and other alignments. This option controls
the side shift of the grader blade, automatically following the selected alignment. The Auto Side Shift option maximizes alignment
accuracy, especially around curves and reduces operator fatigue by eliminating the need to manually control the blade.
Two antennas are better than one – Trimble Exclusive
Only Trimble’s patented dual antenna system gives you exact course and blade position, not the estimated position. Less error always
means more productivity.
Change sensors, not machines
Trimble Grade Control Systems use industry standard Controller Area Network (CAN) harnesses that allow sensors to be moved from
machine to machine. Need more accuracy? Add laser augmentation to your GPS system.
One system for all, and all for one
Only Trimble Grade Control is flexible enough to let you equip your entire fleet—dozers, graders, scrapers and excavators—with fully
upgradable technology. Start where you need to start and add as you need to add. Sonic, slope, total station, laser, GPS 3D–select the
best option for the machine and application. Trimble productivity is smart productivity.
Speaking of smart productivity...
Only Trimble offers the MS992 GNSS Antenna and integrated GPS receiver and antenna, designed to provide maximum portability,
flexibility and accuracy under the toughest construction conditions you’ll ever encounter.
Make your average operators, GREAT!
The GCS900 operator display is intuitive and simple to use, maximizing operator productivity. Plus, complex grading jobs are much easier.
GNSS capable
Only Trimble 3D Grade Control Systems are ready for the next-generation of satellite signals, which means you won’t have to invest in
new systems to take advantage of the expanded capabilities.
Construction tough
Only Trimble Grade Control Systems have been designed from the dirt up to withstand the beating they can take on big machines and
rough sites. More robust components mean less downtime and more productivity.
Two-way data transfer
Only Trimble 3-D grade control systems allow you to remotely manage change designs on the fly. Email design updates directly to the
machine’s display without leaving the office.
Easier and faster to set up
Trimble Grade Control Systems set up faster than competitive systems, which means you can get the work started sooner. Plus, Trimble
systems have an easy self-guiding set-up that walks operators through the process.
13
For more information of pricing on the products listed in this publication
please call SITECH at: 602-437-0410 or visit www.sitechsw.com
GCS600 2D Control Systems
UPGRADABLE
3D
TO
AS400 Slope Sensor
Up to 100% Slope
Digital Accuracy to .01%
ST400 Sonic Tracer
AS400 Slope Sensor
CB450 Control Box
RS400 Rotation Sensor
Laser Mast EM400 and Receiver LR410
GCS600 Grade Control System Cross-Slope and Elevation Control
The GCS600 Grade Control System, also used on dozers and scrapers, is a highly flexible, cross-slope and elevation control system designed to be
used on motor graders for fine grading work. The GCS600 uses two AS400 angle sensors and one RS400 rotational sensor to calculate the cross
slope of either side of the blade, as well as an LR410 laser receiver or an ST400 Sonic Tracer to provide elevation control. Using the ST300, the
system allows stringline, previous pass, or curb and gutter tracing. Using one or two LR410 laser receivers, you can use the system for fine grading
plane surfaces. The GCS600 system is ideal for applications with tight tolerances and finished grade work.
14
14
Paving Control Systems
Trimble PCS400 and PCS900
Control Systems
• Earn bonuses for ride-ability, a measure of smoothness – Get the
job done faster and with excellent smoothness results, meaning
greater bonuses.
• Increase efficiency and productivity – The system can easily monitor
and control both sides of the screed from one or two of the large
user displays.
• Achieve better smoothness and accuracy – Trimble’s sonic averaging
beam technology can lay the finish at an accuracy of 3.3 millimeters
(1/100 foot) to meet even the tightest of smoothness specifications.
• Minimize use of expensive material through better accuracy of the
Trimble ST200 Sonic Tracer. The ST200 allows paving to a tighter
tolerance and saves money by minimizing the use of expensive material.
• Reduce training time and operator mistakes through an advanced
controller and simpler operation. The PCS400 has the most
user-friendly interface in the industry. The large display has an easy-to understand layout for measuring cross slope and height of material.
• Pave slopes accurately and consistently. The PCS400 handles 0.5% slopes accurately and consistently.
CB440 Control Box
• Large 2D paving display
• Monitor both sides of the screed with one
operator with split-screen feature
• Bright dual lightbars per box can
be monitored from a distance
• Easy operation: start a paving run with
only two button clicks
• Easy operator control of height
and slope settings
• Single or dual-operator control
ST200 Sonic Tracer
Upgrade your paving
control system to 3D for
the ultimate in ride-ability
and material savings.
CS200 Contact Sensor
Sonic Averaging Beam
• Heavy-duty, light-weight construction
• Flexible positioning of the sonic
tracers. The sonic averaging beam
uses up to three ST200 Sonic Tracers
15
15
GCS Flex Grade Control Systems for Excavators
Trimble Grade Control System for under $10,000
The Trimble® GCSFlex™ Grade Control System for excavators is designed to meet the needs and budgets of owner operators and small to
mid-sized contractors involved in a range of earthmoving. The rugged system is easy-to-install, easy-to-learn and easy-to-use. Using the GCSFlex
more contractors can realize the business benefits of Trimble machine control technology to increase productivity and become more competitive.
The Trimble GCSFlex is highly flexible with standard sensor options that allow the contractor to easily use the system for a variety of job site tasks.
Contractors can start with the low cost “system in a case” solution and add additional sensors for increased system capabilities as their needs
change. Installation can be done by the contractor and typically takes less than a couple of hours—allowing the contractor to be up and running
with the system very quickly. With a fast install time, no welding or drilling, the system is ideal for non-permanent installation on rental machines.
In Cab Control Box
Laser Catcher
Provides the operator with visual guidance
regarding the position of the bucket.
Provides information regarding the angle and
position of the stick and can be used with a
grade laser for elevation information.
Bucket Sensor
Provides information regarding the
angle and position of the bucket.
Body and Boom Sensors
Provide information regarding the angle and position of the
boom and the body of the machine.
16
16
Spectra Precision Laser Grade Control
Spectra Precision Machine Receivers
LR30 Laser Receiver
LR50 Laser Receiver
LR60 Laser Receiver
For use on many types of grading and
excavation equipment including dozers,
backhoes, excavators and trenchers. Five
channels of grade information plus directional out-of-beam indicators.
Built-in blade tilt indication helps the
operator keep the blade level for increased
production and accuracy. Can be programmed to match an existing or known
grade for slope matching operations.
Patented Angle Compensation for excavation
automatically calculates and corrects the
grade display for the angle of the dipper arm.
Check grade with the dipper arm extended or
retracted up to 30 degrees.
CR600 Laser Receiver
An innovative alternative
• Provides high, low, or on-grade information for all your grading
and excavation applications up to 460 m (1,500 ft) radius.
Magnetic Receiver
Mount
More mounting options
• In addition to hand-held and rod-mounted capabilities, the
CR600 can be used as a machine control mounted receiver.
For quick installation and set up of machine
receivers on excavators and backhoes.
Highly visible
• Super-bright LED display that can be seen by a machine operator.
CB25 Control Box
CB30 Dual Control Box
Dozer Receiver
Mount
A permanent solution for mounting machine
receivers on dozers and graders. Provides
additional shock absorption and height
above the cab.
17
17
Laser Levels; Basic
Spectra Precision
LL300 Laser Level
Spectra Precision
LL500 Laser Level
300 m (1,000 ft) min. working diameter
• Minimizes operating costs and boosts productivity.
Rugged design with “hard hat” rotor protection
• Superior drop and weather protection.
• Horizontal accuracy +/- 3/32 in. @ 100 ft.
Fully automatic self-leveling
• Provides fast and accurate setup.
Extremely versatile with single-axis
manual slope
• Cross-axis self-leveling allows for grade matching on the job site.
Spectra Precision
LL400 Laser Level
Fast setup and automatic self-leveling
• Long-range accurate laser increases productivity by reducing the need for multiple setups on large job sites.
• High accuracy laser +/- 1/16 in. @ 100 ft.
• Machine control compatible.
Highly rugged design and patented lighthouse seal
• Superior drop and weather protection.
Single-axis slope mode
• Provides grade matching with self-leveling cross axis.
18
18
Built-in leveling system with out-of-level
shut off
• Maintains accuracy over the entire work area, and minimizes errors.
High accuracy laser, 1.5 mm per 30 m (1/16
per 100 ft) with temperature compensation
• Highly stable and repeatable accuracy even under large temperature changes.
Spectra Precision Laser
HL750 Laserometer
• Direct digital readout of elevation
• Large 12.7 cm (5 inch) reception window
• Works with another HL750 for long range wireless
remote display and monitoring
• Dust and weatherproof housing withstands a drop of
up to 3 m (10 ft) onto concrete
• Anti-strobe sensor stops construction strobe lights
from setting off the receiver
Laser Levels; Single and Dual Grade
Spectra Precision
GL710 Single Grade
Laser
Spectra Precision
GL512 and GL522
Single Grade Laser
An easy-to-learn, easy-to-use one-person grade
laser, economical and accurate up to a 3,000 ft
diameter. Ideal for general construction, site
preparation, trenching and pipe laying applications.
This economical choice has -10 to +15% grade
range with an operating diameter up to 600 meters
(2,000 feet). Ideal for general construction, site
preparation, trenching and pipe laying applications.
Comes with full two-way remote control.
Spectra Precision
GL720 Dual Grade
Laser
GL762 Long Range
Precision Grade Laser
For applications that require the highest precision
and longer distances, the GL762 is the ideal laser.
It provides additional temperature tolerance, and
is compensated at more points which make the
GL762 the most accurate of the GL700 series
lasers. Recommended for use in Agriculture.
This laser choice has +/-10% in the X axis grade
range and -0.5 to+25% Y axis grade range with
high accuracy up to 900 meters (3,000 feet)
diameter. Ideal for general construction and
machine control grade applications.
Spectra Precision
GL722 Dual Grade
Laser
With long-range radio remote and the same range
and base capabilities as the GL720, the GL722
includes the benefits of the full radio remote
functions…plus automatic axis alignment
capability. Ideal for general construction, site
preparation and road construction.
Long-Range Radio Remote
With 2-way communication between the transmitter and the remote, you can
now change grade on the fly… even from the cab… without approaching the
transmitter!
No more long walks up grade. By remotely changing and reading grade
information, you can speed setup and reduce costly communication errors.
Slope Lasers
Flat Plane
Single Slope
Dual Slope
New challenges demand new solutions.
The fiercely competitive, 21st century
construction environment has created a
whole new set of business challenges.
With increasing accuracy requirements
and faster completion times, your bids
need to be razor sharp just to compete.
As the leader in construction positioning
technology, Trimble is providing a constant
stream of innovative solutions to help you
gain the edge and succeed in this
environment. Among these are new
solutions to help you precisely control
difficult tasks like long-range, high
accuracy elevation control and fine
grading for major construction projects.
19
19
Grade Control Systems; Basic
Why Automatic Blade Control
Adding the automatic blade control option to the Trimble or
Spectra Precision Grade Control System allows contractors to
further improve their productivity and profitability.
• Reduce over-use of expensive material
• Complete projects in less time
• Lower operating and maintenance costs of machine
• More accurate and consistent grades
• Reduce operator fatigue
Spectra Precision
Dozer Control System
• Entry level, elevation dozer control for your pad work
• Productivity: keeps you moving while letting you get
to grade in less passes
• Consistent accuracies will help save on concrete
• Automatic to manual control with a flip of a switch
Laser Display Systems for
Excavating and Grading
The extremely rugged LR60 display systems
from Spectra Precision Laser are highly flexible,
and can be used on a wide range of machines,
including dozers, backhoes, scrapers, skid
steers and excavators.
20
20
Pipe Lasers and Accessories
Spectra Precision DG711 Pipe Laser
SELF-LEVELING: The DG711 features the largest automatic leveling range in the industry providing quick, easy
setups, regardless of grade. Unlike traditional pipe lasers, they eliminate the need for rough leveling and minimize
crew training. Simply set up the laser in the pipe, manhole or open cut without the need to swivel or rough level the
unit.
LINE ALERT: This unique feature is ideal for working in high-vibration or wet conditions where the pipe lasers may
be disturbed. The beam flashes to notify you that the setup line has been disturbed, eliminating the necessity of
rework.
LINE SET: The line set/check capability of the pipe laser allows you to raise the beam outside of the trench for fast
line setup or checking. Raising the laser beam out of the trench to an above-ground stake saves you time—instead
of having to move the excavator offline during setup of the pipe laser, you can just get on with your job.
Trimble DG711 has unique capabilities ensuring laser accuracy in Arizona’s high temperature climate.
956 Pipelaser target and stand
T-bars
Two sizes simplify manhole, drop manhole, or large
diameter pipe setups ranging from 84 cm to 2 m (2 ft.
9 inches to 6 ft. 8 inches). Provides secure mounting for
high theft or vibration areas.
Blower
Variable speed, high capacity output, minimizes beam
refraction to prevent grade sag. Operates on 12V DC.
12V DC Battery Power Cable
Another option for providing power for extended periods
of operation or for back-up in remote areas.
Automatic Laser Plummet
Auto plumbing, visible red laser that replaces the 5/8 x 11
instrument hold down on tripods or the Manhole Mount.
Manhole Mount
Attaches to a manhole cone or riser so any 5/8 x 11
instrument can be easily plumbed over the pipe laser.
Alkaline Battery Pack
Great back-up if you forget to charge the unit. Insert four
D-cell alkaline batteries and get over 40 hours of use.
Cigarette Lighter Charger
Provides the ability to charge the battery pack overnight
in the work vehicle or for a refresher charge to finish the
workday.
21
For more information of pricing on the products listed in this publication
please call SITECH at: 602-437-0410 or visit www.sitechsw.com
21
Optical Instruments
56-DGT10 CST Theodolite
Totally re-designed, with a number of features you have
come to expect from CST/Berger.
• State-of-the-art glass encoder 5-10 second switchable
horizontal and vertical angle readout
• Two LCD panels with large, easy-to-read numbers
• Crosshair and display panel illumination
• Built-in Clockwise/Counterclockwise
horizontal angle measurement options
• Three different ways to read vertical angles
• Auto Power Off Option: if unit is not moved
it will shut off in- 20 minutes, 30 minutes or infinity
• Optical plummet water resistant, sealed construction
• Removable tribrach for multiple set-ups
• One year warranty
Automatic Level
The Seco 24x auto level features a sturdy metal body
with a magnetic dampened compensator. The top plate is
easily removed for adjustment. This level fits 5/8 x 11ft
flat or domed tripods.
A high-quality aluminum carrying case is included.
David White
LT8-300 LTU
Alignment Transit for Pipe Laser
• 26X Level-Transit
• ±3/16-in.(4.75mm) at 150-ft.(45m)
leveling accuracy
• Horizontal circle, lock and tangent
• Vertical arc, lock and tangent
• 1:100 stadia with glass reticle
• Laser plummet– Class 2M
Berger
54-200B Transit Level
• Built in sunshade
• Large coated achromatic lens
• Rubber eyepiece cap
• 4ft (1.2m) short focus
• High precision glass level vials
• Dust protected eyepeice with fixed crosshairs
• Powder coated safety yellow paint
• Includes custom hard-shell carrying case, plumb bob
(not included with Econo-Series)
For more advanced optical instruments check out Trimble’s line of Robotic Total Stations on page 28.
22
Interior Laser Tools
Spectra Precision
HV101 Interior Laser Level
Bright beam, scanning and variable speed control
• Simple controls provide quick one-touch set-ups
• Suitable for shorter range interior applications
Automatic self-leveling in both horizontal and vertical
• Fast and accurate set-ups
Rugged housing is durable and weatherproof
• Laser is unaffected by job-site dust and moisture
Diameter Range
• Receiver: 300m (1,000 ft.)
• Visible: 60m (200 ft.)
Spectra Precision HV301
Interior Laser Level
Spectra Precision HV401
Interior Laser Level
Composite material housing is rugged, lightweight and weatherproof
• Easy for contractor to carry and use in demanding jobsite conditions, less downtime for repair.
Fast setup and automatic self-leveling
• Minimizes operating costs and boosts productivity.
Fully automatic self-leveling in both
horizontal and vertical
• Provides fast and accurate setup in horizontal
and vertical.
Highly visible beam and superior scanning functions
• Increased beam visibility for mid-range interior layout and aligning.
Diameter Range
• Receiver: 300m (1,000 ft.)
Powerful, bright visible beam for large projects
• Provides permanent, hands-free reference for
multiple users.
Temperature calibrated accuracy
• Consistent performance over the entire job site.
Diameter Range
• Receiver: 600m (2,000 ft.)
Spectra Precision
LP40 Laser Pointer
Four beam self-leveling pocket laser
• Plumb up, down, level and square beams
that are self-leveling making it easy to set up and use.
Unmatched durability
• Can take up to a 1m (3 ft) drop onto concrete and still provide precise jobsite accuracy.
Maximum versatility for interior applictions
• With four beams the LP40 is ideal for installation of overhead fixtures, truing walls, installing cabinets, and finishing interior carpentry.
Spectra Precision
HD100 Distance Meter
The advanced Spectra Precision® HD100 Laser
Distance Meter is designed to give contractors a
one-person distance measuring and estimating tool
to measure remote and difficult-to-reach places. The
multi-functional instrument ensures simple, quick, and
reliable measurements. A visible laser dot lets you safely
measure hard-to-reach places or hazardous conditions,
such as high overheads, factory interiors, or over water.
A built-in tilt sensor quickly and simply determines tilts
up to ± 45° and prevents errors in measuring when
the distance meter is not held level. This eliminates the
need to constantly check a level vial. The HD100 also
calculates areas, volumes, room dimensions, and various
types of Pythagorean functions.
23
23
Tripods, Prism Poles and Locators
Machine Control Tripods
These heavy-duty tripods are built
specifically for machine control
applications.
Laser Trailer/Tripod
for Machine Control
Rugged aluminum alloy
construction is lightweight
enough for easy transport
and set-up.
Built in wheels
make this sturdy
oversized Laser Trailer/
Tripod easy to transport.
Robotics Tripods
CST’s heavy-duty Robotics Tripod
provides a secure base for your
automated Total Station. Three
models are available: all-aluminum,
all-composite, and composite/wood
construction.
Elevating Tripods
These wing nut clamping tripods
have an adjustable center column
and are designed to be used with
laser levels, theodolites, and transits.
CST Magna-TrakTM
Series Magnetic
Locators
These magnetic locators are lightweight in design with an easy-grip
handle, an LCD visual display (Model
100 and 102 only), and/or audio
tone, hard rubber tips, water resistant
cases, easy battery access, and they’re
backed by a five-year warranty from
the manufacturer.
Wood/Fiberglass
Tripods
An outstanding combination of hard
maple legs with fiberglass dowels
makes this the most versatile tripod
on the market.
Aluminum Tripods
Our aluminium tripods offer rigidity
and strength as one of the
contractor’s most necessary tools.
Trimax
Tripod 90550
Prism Poles for Layout
Seco Thumb
Release Bi-Pod
The SECO Thumb Release Open Clamp
Bi-pod allows the user to simply clamp the
pole into place without lifting and threading it through the bi-pod head! Within
seconds the operator can set up a freestanding GPS antenna pole or prism pole.
24
24
Fixed Height
Tripod
Rods and Clamps
Rods
Telescoping Aluminum Rods
Metric, Tenths or Dual Measurements
Telescoping Aluminum Rods are made of a light and durable aluminum alloy. The anodized
sections are imprinted with special weather-resistant and corrosion-resistant inks. Tight
tolerances on extruded aluminum sections allow for smooth extension and prevent
unnecessary clattering and sloppiness.
Fiberglass Leveling Rods
Metric, Tenths or Inch Measurements
These fiberglass rods from Crain are lightweight and sturdy for multiple applications. They
are rugged, corrosion-resistant and non-conductive to withstand conditions on the jobsite.
With easy-to-read graduations, they come in tenths, inches and metric and come in a variety
of lengths.
Lenker Direct Reading
Laser Rods
These Lenker-style rods are used to measure direct elevations for cut and fill. They’re made
of high strength clear anodized aluminum for lightweight rugged, dependable operation.
They will not rust, split, splinter swell or warp in any environment. The tape has a heavy duty
matte textured face and is easy on the eyes in bright sunlight. These lenker rods come in
tenths, inches and metric and come in a variety of lengths.
Clamps
Spectra Rod Clamp C 57
Fits HR550 Receivers
Fits HR350 and HR250 Receivers
1061 Column Clamp
Spectra Heavy Duty Column Clamp supports all
Horizontal/Vertical Spectra Lasers on square columns,
heavy duty I-Beams or doorways. Center column has 8”
(20cm) manual height adjustment. Graduated scale in
0.02ft and 5mm increments.
Fits HR400, HR500 and CR600 Receivers
Lenker Rod Clamp
Universal laser detector clamp for Lenker Rod
Spectra Rod Clamp C700
Fits HL700 and HL750 Receivers
25
25
Trimble Agriculture Solutions
Trimble Laser Control Systems
Spectra Precision Laser GL700 Series
PlaneLok: the laser beam locks to a fixed elevation and stays there regardless
of wind or temperature changes.
Grade Matching: set your receiver at the same height as the transmitter,
go to the remote point with the remote control, and the transmitter will
automatically match the two points and display the grade without returning
to the laser transmitter.
Automatic Axis Alignment: gives you simple alignment of either side of any
grade axis to the desired remote point.
Long Range Remote Control: all transmitter functions are automatically
controlled from inside the vehicle allowing for one-person set-up and
operation.
GCS 300/400 Grade Control Systems
Cost-effective automated control systems that improve productivity and accuracy of
agricultural drainage and leveling equipment by up to 50%.
CB415 Control Box
LR410 Laser Receiver and
EM400 Electric Mast
SR300 Survey
Receiver
OR
26
26
GL700 Series Grade
Laser Transmitter
AgGPS FmX Integrated Diplay
With industry leading performance and reliability, the AgGPS® FmX® integrated display can handle all your precision ag needs.
From guidance to steering, rate control to yield monitoring, the FmX integrated display has you covered. The versatility of the
FmX integrated display makes it the affordable choice to adopt as technology changes.
Control up to 48 individual rows with
the Field-IQ™ crop input control system
and easy to install Tru Count clutches
LB25 lightbars can be
attached to the display
or mounted separately
AVAILABLE ACCURACIES
FOR THE FmX DISPLAY:
WAAS
Accurately monitor
and map harvested
crop yield and
moisture with yield
monitoring
2
1
1
Submeter accuracy (WAAS)
Entry-level GPS lightbar guidance system
Easy-to-use and most affordable
Built-in high performance DGPS receiver
with Trimble® OnPath® filter technology
Ultra rugged aluminum housing
Compatible with EZ-Steer® 500 assisted
steering system
Pivot
• Sub-inch RTK accuracy
• Dual video input
• Built-in 220 channel GNSS receiver that is GPS
and GLONASS capable
• Supports Field-IQ crop input control systems for
spraying, spreading and planting
• Wireless data transfer between the field and office
• Manual and automated steering
• Feature mapping and record keeping capabilities
A-B PatternIdentical Curve
4
5
OmniSTAR HP
1
2
3
4
0
RTK
1 inch accuracy
Control your rate when
planting, seeding, spraying,
spreading and strip tilling
with the FmX integrated
display and Rawson™
variable rate drive
CFX750 Display
3
2-4 inch accuracy
1
Choose Display
2
1
Manage field leveling
and field drainage with
the FieldLevel II system
AgGPS EZ-Guide 250 Lightbar
Choose 8
different
Patterns
8
OmniSTAR XP
Deliver the correct
amount of fertilizer
in real time with
the GreenSeeker®
nitrogen sensor
Control your implement with the
TrueGuide™ implement guidance
and TrueTracker™ implement
steering systems
Headland
6
3-5 inch accuracy
Easily perform prescription
based rate control
•
•
•
•
•
•
4
8
Two GPS+GLONASS
receivers provide precision
with the vehicle, as well
as the working implement
behind the tractor—where
you really need it
6-8 inch accuracy
0
1
1
GLONASS
1 inch accuracy
0
1
AgGPS FMX Integrated Display
• Sub-inch RTK accuracy
• FieldLevel II for GPS leveling
• Autopilot GPS steering system
• Implement steering
• Application control
• Multiple video input
• Wireless syncronization with Farm
Works office software
A+PatternMulti Headlands
Freeform
Adaptive Curve
27
27
Building Layout Products
RTS555, RTS655, RTS633
Building Layout Robotic Total Stations
Trimble Building Construction Positioning Solutions give contractors
more control of their job-sites... delivering significant improvements in
construction accuracy and productivity. By connecting your office and job-site through
wireless data transfer, design updates can flow between field and office in real time. Jobs
can be created and maintained by someone in the main office and emailed to various
sites. Daily layout progress can be monitored. Every question can be answered instantly.
Every decision is an informed one. The bottom line is greater control, cost savings and
maximized productivity. When combined with the Trimble LM80 Layout Manager, the
Trimble Robotic Total Stations significantly increase accuracy, reliability and productivity.
maximum flexibility and cost savings
Application programs let you set up anywhere faster and perform all job site layout and
measurment tasks yourself. You’ll reduce your need for outsourcing and lower your costs.
easy to learn and use
Easy-to-follow user interface shortens the learning curve and speeds up operation. With
minimal training, you’ll find you don’t need to be a surveyor to use these total stations.
one person operation
Handle all layout tasks with only one person. Regardless of the complexity,
your layout will be quick and accurate.
28
28
NOMAD HANDHELD
CONTROLLER
Powerful and Easy to Use
The rugged Trimble controller lets you carry, manage, work with,
and lay out your jobsite blueprint in a digital format. The WLAN
feature allows you to connect wirelessly to the Robotic Total Station,
eliminating cables and providing maximum flexibility as you move
around the site. In addition, the controller hardware connects to a
wireless network to enable the transfer of data and information
between the office and field; reducing delays associated with travel
and ensuring field crews have the most up-to-date design information.
LM80 DESKTOP
SOFTWARE
The LM80 Desktop software is a valuable, easy-to-use tool for the
LM80 or construction total station. Featuring an intuitive
user interface, the LM80 Desktop makes it easy to
draw in your blueprint and create a digital replica of your project.
A powerful wireless package, you can also create points
quickly from a digital CAD drawing and upload them
to the LM80, as well as download CAD background
files to your LM80 for easy reference on the job site.
The LM80 Desktop can send a point file directly to a total
station for onboard layout.
29
29
VisionLink Fleet, Asset and
Site Management Solution
View all of your equipment regardless of make,
in a secure, web-based application
The VisionLink™ solution from Trimble integrates site productivity with asset and fleet management to give you a complete view of machine
status, machine location and project status so you can make the right decision at the right time. VisionLink brings together a range of
information including:
• Asset location, hours, and events
• Machine health and maintenance
• User-defined alerts
• Near real-time compaction pass count, consistency and coverage area maps
• Near real-time surface model elevation, cut/fill maps and progress volumes
The web-based VisionLink solution provides integrated production output and asset management information to owners, senior executives,
operations managers, equipment managers, maintenance managers, site supervisors and rental equipment managers.
Know when and where
your equipment is working
Trimble SNM940 Connected Site Gateway
30
PRODUCT CATALOG
The Tools to Revolutionize Your Construction Workflow
Comprehensive Site-Wide
Construction Technology Systems
Connected
Worksite
Solutions
www.sitechsw.com
www.sitechsw.com
Innovative solutions improve productivity at all stages of
the construction workflow, making you more competitive.
They are rugged, easy-to-use, fully upgradeable, flexible
and expand as you grow your business—maximizing your
return on your investment.
or visit
602-437-0410
www.sitechsw.com
please call SITECH Southwest at:
For more information or pricing on the products listed in this publication,

Sitech Catalog

Transcription

Similar documents

Terramodel Software for Construction

Laser Engraving - Source International

Legacy Sell Sheet

LILT - BioFlex Laser Therapy

UNIVERSAL LASER BORE SIGHTER–DELUXE KIT

972-258-6400 | TYLOCK.COM

Dr. Daniel Y. Fung Dermal Laser Centre Yaletown, West Vancouver

Laser Engraving Guide Using VCarve

4:00pm - Ultrazone

TGS_ADTS_CENTURION_v2:Layout 1.qxd

DATASHEET