pgs. 938-950 - Marshall Distributing

SHOP
HELMETS
INSULATED TERMINAL
ASSORTMENT
NYLON CABLE TIES
With ultraviolet protection.
Sold 100 per bundle.
APPAREL
Contains the most popular
types of insulated terminals.
Approximately 175 pieces.
Packaged in a clear plastic
box.
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
Order No.
704-K9040
705-K9050
701-K9060
709-K9590
702-K9001
706-K9061
Length
4”
6”
7”
8”
11”
14”
Width
.100”
.140”
.187”
.300”
.187”
.300”
Retail
$.07 ea.
.09 ea.
.10 ea.
.15 ea.
.17 ea.
.30 ea.
$22.95
TERMINAL REMOVAL
TOOL
Designed for use on wire harness
electrical connectors for removal
of wires from the plastic housing.
Individual handles for access in
tight places. Terminal removal
kit contains 12 pieces for use on
round and flat terminals.
LATEX GLOVES
Superior puncture, tear and
chemical resistance with
excellent dexterity. Powder free
minimizes the risk of developing latex protein residue related
allergies. 14 mil (fingers and
palm) for maximum chemical
resistance. 12” cuff length protects wrists and forearms.
No. 12-7092 L-E9362
No. 12-7092 XL-E9362
No. LTA18P-K9941
No. 12-5771-K9992
Tube of 50
Tube of 50
$49.95
12 piece kit
$39.95
39.95
ELECTRICAL
BATTERIES
UNIVERSAL CONNECTOR KIT
CONTROLS
This is a general connector and terminal kit for Import Motorcycles;
Contains an assortment of male & female connectors, matching
terminals and wire sleeving.
UTV
ACCESS.
CHINESE
PARTS
LUGGAGE
ELECTRICAL TAPE
Quality PVC electrical tape with UL listed. Package 3/4” wide x 60 ft.
rolls. Sold each.
No. 11-2277-E9210
No. 14-0559-K9945
$89.95
COLORED WIRING
$2.25
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
Made to match with OEM colors. 13 ft. long. Capacity of 14A/12V.
Wire-E9130
FRAME &
BODY
SHOP
TRAILER
3M QUICK SPLICE CONNECTORS
For use with 14, 16, and 18 gauge wire. Order 50/bag.
MERCHANDISING
No. L132-E9200
938
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$.50 ea.
Order No.
12-0033
12-0034
12-0035
12-0036
12-0037
12-0038
12-0039
12-0040
12-0041
12-0042
Retail $4.95
Color
Red
Black
Green
Sky Blue
Orange
Blue
White
Yellow
Green/Yellow
Brown
Order No.
12-0043
12-0044
12-0045
12-0046
12-0047
12-0048
12-0049
12-0050
12-0051
Color
Black/White
White/Black
Grey
Black/Yellow
Red/Black
Red/Yellow
Black/Brown
Orange/White
Sky Blue/White
2014
SHOP
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
CRIMPER
This high quality crimping tool can be used for all in-house repairs.
No. 14-0558-E9944
EXHAUST
$74.95
CHAINS &
SPROCKETS
3-WAY PLUG WRENCH
Cast, plated combination wrench fits 10-12-14mm spark plugs. Wrench size:
18mm and 20mm.
No. M240-E9920
SPARK PLUG INDEXING WASHERS
$4.95
Indexed spark plugs align the open end of the electrode toward the intake
port. The hottest flame meets the new fuel charge for a performance gain,
and increased mileage and plug life. Measurements: gold .75mm, silver
1.00mm, purple 1.25mm and red 1.60mm.
No. 11-4488-K9220
No. 11-4489-K9520
BRAKES
ENGINE
AIR/FUEL
$3.75
4.25
Twin cylinders, 8pc.
Triple cylinders, 12pc.
DRIVE
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
HEAVY DUTY SPARK PLUG WRENCH
RATCHET SPARK PLUG WRENCH
This 13/16” ratchet spark plug wrench is made specifically for watercooled
2-stroke motorcycles, ATVs and watercraft. The ratchet mechanism makes
installation and removal of the spark plug very easy. Use one side for installation and flip it over for removal.
No. 11-5142-E9601
Cast, plated combination wrench fits 14mm or 18mm spark plugs. Wrench
size: 20mm and 26mm.
UTV
ACCESS.
No. 11-0172-E9140
CHINESE
PARTS
$6.95
$16.50
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
14mm SPARK PLUG SOCKET
• Thin wall design allows for use in small plug cavities.
• Can be driven with 1/4 in. drive ratchet, 13mm or 14mm wrench, socket
or T-handle.
• Rubber plug retainer.
• Limited lifetime warranty.
• Fits late model KTM 4-stroke and Honda CRF250/450.
12mm plug wrench. Fits NGK “D” series and ND “X” series. 120mm long.
No. 5952-E9921
No. M4110-E9230
$19.95
WWW.MARSHALLDISTRIBUTING.COM
SHOP
TRAILER
T-HANDLE PLUG WRENCH
$5.50
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
939
MERCHANDISING
SHOP
HELMETS
SPARK PLUG
GAP TOOL
APPAREL
.025, .030, .034, .035,
.040 and .045.
EYE
PROTECTION
PROTECTIVE
GEAR
No. 8150-E9320
$3.95
TIRES/
WHEELS
EXHAUST
SPARE PLUG and BULB CADDIES
Yellow plastic universal plug holder protects a single plug from damage. Helps maintain plug gap. Sold each.
CHAINS &
SPROCKETS
No. 11-8480-E9320
DRIVE
BRAKES
ENGINE
AIR/FUEL
$3.95
IGNITION SYSTEM TESTER
• Test the integrity and strength of your ignition system.
• Spark gap is adjustable from 0 to 10mm.
• The larger the gap your ignition will jump, the stronger your system is.
• Will test the ignition on most motorcycles, watercraft, ATVs & snowmobiles.
No. 3116-E9760
$10.50
CHEMICALS
ELECTRICAL
BATTERIES
Holds 2, 14mm spark plugs and is small enough to fit in your pocket.
CONTROLS
No. 11-0170-E9410
UTV
ACCESS.
CHINESE
PARTS
LUGGAGE
RACKS &
ACCESS.
$2.50
PLUG JAKS
Three Spark Plug Holder
Rivet mounted caddy keeps 3 spare plugs handy for quick and easy
changes. Includes 4 rivets.
No. 11-5706-E9740
$7.95
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
Two Spark Plug Holder
Mounts any place under the hood.
No. 2016-E9920
940
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
Stores 2 spark plugs (14 or 18mm), 2 taillight bulbs and headlight
bulb. Also has space for spare inner throttle or brake control wires.
$4.95
No. L300-E8900
$2.95
2014
SHOP
CHAIN BREAKERS
HELMETS
APPAREL
PBR (PRESS, BREAK, RIVET) CHAIN BREAKER
EYE
PROTECTION
• Innovative design will press, break and rivet 520, 525 and 530 chains
with one convenient tool.
• Versatile design will remove chain pins, press master-link plates and rivet
hollow nose and soft nose (quad stake) master link pins on O-ring and non
O-ring type chains.
• Easy to use design allows you to change tool functions by simply moving
the position of the anvil block.
• Indexing letters on movable anvil and body insures correct tool configuration. Simply line up the letter on the anvil to the letter on the body to get
the configuration you need!
• All components conveniently store on tool when not in use.
• Compact and light enough to carry in a tool bag for trail side repairs.
• Patent pending.
No. 5131-E9565
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
$86.95
DRIVE
BRAKES
ENGINE
CHAIN CUTTER/PRESS/
RIVET TOOL
Three in one tool. Chain cutter, press and rivet tool works on chain sizes
35-630. Comes complete with carrying case.
No. 12-4092-E9516
No. 12-5963-E9540
No. 12-5964-E9540
No. 12-5965-E9540
REPLACEMENT PIN
2mm
3mm
4mm
$94.95
$6.95
6.95
6.95
AIR/FUEL
CHAIN BREAKER
CHEMICALS
Works on all chain sizes from 420 to 630. A tough shop tool featuring forged
chromemoly frame and heat treated tool steel tip and spindle. Tool pushes
pin completely through chain link. Handle folds to fit a small tool compartment for rider use. May be used with impact wrench for shop use.
No. 11-1670-E9571
No. 11-1671-E9520
REPLACEMENT PIN
$26.95
$4.10
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
CHINESE
PARTS
T-6 CHAIN TOOL
• For breaking 520 to 530 chain.
• For pressing on and off 520 and some 525 clip type master link side LUGGAGE
plates.
• Light weight, 6 oz. including press plates and handle (8 oz. with pouch).
RACKS &
• Will push link pin completely through link/side plate.
ACCESS.
• Custom pouch holds tool securely and includes pocket for extra chain or
master links and a large accessory pocket.
PLOWS &
• Body forged from high-strength 4130 chrome-moly.
IMPLEMENTS
• Body bolt and extractor bolt manufactured from billet high- strength 7075
T-6 Aluminum.
FRAME &
BODY
• Replaceable pin is heat treated for strength and wear resistance.
• Press plates manufactured from light weight 6061 T-6 aluminium.
• For use on clip type master links with press fit plates only.
SHOP
• This tool does not rivet master link pins.
• Does not rivet chain pins.
No. 12-8251-E9005
$76.95
TRAILER
MERCHANDISING
WWW.MARSHALLDISTRIBUTING.COM
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
941
SHOP
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
CHAIN BREAKER
This compact tool is designed to rivet D.I.D. ZJ rivet style links and to cut
and press side plates onto rivet or clip style connecting links. Designed to be
used for D.I.D. 520, 525, 530 and 532 size chains. A handy denim pouch is
included for storage.
No. 2115-E9547
$119.95
CHAIN ALIGNMENT TOOL
No. 12-7037-E9411
$17.95
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
CHAIN BREAKER
BATTERIES
CONTROLS
UTV
ACCESS.
Works on chain sizes up to 530, including o-ring. Skin packed for point-ofsale display.
No. M56400-E9811
No. M56402-E9420
REPLACEMENT PIN
$19.95
$4.25
MASTER LINK PLIERS
•Designed to simplify installation and removal of clip-type master links.
•One tip is shorter and notched to be placed on the pin which allows the
longer end to push the clip.
No. 12-7061-E9931
$21.50
CHINESE
PARTS
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
THE GRUNGE BRUSH
SHOP
TRAILER
MERCHANDISING
The Grunge Brush™ is an adjustable brush designed for cleaning drive
chains. The Grunge Brush™ is rugged, oil resistant and can be used on
O-ring and non O-ring chains. The brush blocks are easily adjusted to fit
any size chain. Replacement brush blocks are available and sold separately.
MINI CHAIN PRESS TOOL
•Fits most standard and O-ring chains.
•Small, compact design.
•Hex key wrench is included.
•Made in the U.S.A.
No. 12-4862-E9460
942
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$9.95
No. 11-5309-E9580
Replacement brush blocks, set of 4
No. 11-5310-P9530
$13.95
$5.95
2014
SHOP
OIL FILTER REMOVAL TOOLS
Compact, close clearance designs developed to service hard-to-reach filters faster and easier. Once in place,
these close fitting tools have the high torque capabilities needed to break loose the most stubborn seizures, more APPAREL
than 85 ft. lbs.
• Saves time removing stubborn filters in tight places!
EYE
PROTECTION
• For use with 3/8” drive.
• Sold on card with application information.
PROTECTIVE
Order No.
Size/Description
GEAR
11-2393
76mm, 14 flutes
11-2394
74/76mm double step, 15 flutes
TIRES/
11-2395
80mm, 15 flutes
WHEELS
11-2396
65mm, 14 flutes
Application
Retail
11-2397
65/67mm double step, 14 flutes
BMW
EXHAUST
11-2398
68mm, 14 flutes
Order No.
11-2393-E9990
11-2393-E9990
11-2395-E9990
11-2396-E9990
Fits filter no. 11421460845, on
all K75/100/1100, R1100
HARLEY-DAVIDSON
Fits filter nos. 63805-80/T,
63806-83, on all FL/FX/XL
$15.95
$15.95
HONDA
Fits filter no. 15410-MJ0-003 on CB700/SC,
all V4’s thru ’90, most V twins
Fits filter no. 15410-MM9-003/13 on
VTR250, CB400F, CBR600, VT600C,
VLX600, NT650, CB750, VFR750,
PC800, CBR1000, ST1100,
VT1100, GL1500
$15.95
15.95
KAWASAKI
Fits filter no. 16097-1054 on all
EN450, EX500, VN700/750
11-2395-E9990
Fits filter no. 16510-05A00 on all
GV700, VS700, GSXR750 ’86-87,
GV1200, GV1400
$15.95
Fits filter no. 16510-06B00 on all GSX600/750,
GSXR750 ’88-99, VS750, GV1400
15.95
SUZUKI
Order No.
11-2394-E9990
11-2396-E9990
11-2398-E9990
11-2394-E9990
11-2395-E9990
11-2398-E9990
HELMETS
$15.95
11-2396-E9990
11-2397-E9990
11-2395-E9990
11-2396-E9990
11-2398-E9990
Application
EMGO FILTERS
Fits our nos. M77, M78, M824,
M82410 for Harley
Fits our nos. M82220, M82230 for
Honda, Kawasaki and Yamaha
Fits our nos. M55660, M55670
for Suzuki
FRAM FILTERS
Fits our nos. PH6010, PH6016, PH6022 for
Harley, Honda, Kawasaki & Suzuki
Fits our no. PH6017 manufactured in Korea
for Honda and Kawasaki
Fits our no. PH6017 & PH6018 manufactured
in Phillipines for Honda and Kawasaki
Retail
CHAINS &
SPROCKETS
$15.95
15.95
DRIVE
15.95
BRAKES
$15.95
ENGINE
15.95
15.95
AIR/FUEL
VESRAH FILTERS
Fits our nos. VSF1004, VSF3008,
for Honda and Suzuki
Fits our nos. VSF1007, VSF4005,
for Honda and Kawasaki
Fits our no. VSF3009 for Suzuki
$15.95
15.95
15.95
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
OIL FILTER WRENCH
UTV
ACCESS.
Gold Anodized
CHINESE
PARTS
Emgo nos. M82220 and M82230, Fram no. PH6017, Marshall Racing nos.
89-3530 and 89-3500 and Vesrah no. VSF1007. Fits many other Honda,
Kawasaki and Yamaha models. Honda no. 07HAA-PJ70100, 15410-MM9003/13.
No. M27580-E9290
LUGGAGE
RACKS &
ACCESS.
$15.50
OIL FILTER MAGNET
SPIN-ON OIL FILTER WRENCH
• Especially designed for use on Honda V-type engines.
• Will fit many Japanese brand motorcycles with 80mm diameter oil filters.
• Can torque filter to factory specifications.
• Use with a 3/8” drive ratchet or extension.
No. 12-7035-E9160
WWW.MARSHALLDISTRIBUTING.COM
$9.50
PLOWS &
IMPLEMENTS
• Easy to install, just attach to base of standard oil filter.
• Standard oil filters only trap particles down to 20 microns, leaving the
most harmful 5 to 20 micron particles to circulate through your engine.
• Powerful six point magnet traps harmful, abrasive hard metal particles
down to 1 micron that a regular oil filter doesn’t.
• Available in two sizes to fit most spin on and cartridge oil filters.
• Reusable for up to 5 oil filter changes.
• Makes any oil filter better than a high performance oil filter.
No. 2605-E9460
No. 2604-E9460
3/4” & 13/16” hole filters
1” hole filters
$9.95
9.95
All numbers in BLUE are new for this year.
943
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
SHOP
OIL DRAIN PLUG NUT/CLUTCH
NUT SPANNER TOOL
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
Heat treated 3/8” drive socket.
Honda ATV: ATC90/110 all, ATC125M ’84-85.
Cycle: CL/CT/S/SL/ST90, CM91, CB/CL/SL100,
XL100, CB/SL/TL125, XL125, CA/CB/CL160,
CA/CB/CD/CL/SL175, XL175, CA/CB/CL/CT200,
TL250, XL250, CB350/G, CL/SL350, XL350,
CB/CL450, CB500T. Removes special engine
mount nut from CBR600RR ‘03-06.
BRAKE BLEEDER
Aids in the bleeding and servicing of hydraulic brakes. Makes bleeding
brakes a one person job. The unique check valve allows fluid and air to
escape while preventing air from re-entering the system. Instructions and
hose included. Made in USA.
No. 11-0722-E9601
4 stroke singles 90cc to 350cc
4 stroke twins 160cc to 500cc
EXHAUST
$16.95
No. 11-5141-E9431
CHAINS &
SPROCKETS
BRAKE BLEEDER
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
$20.75
COOLANT RECOVERY SYSTEM
A universal recovery system for most water-cooled motorcycles and ATVs.
Designed for hot weather and/or high altitude riding conditions. Prevents loss
of coolant due to overheating. The bottle mounts to your frame or behind your
number plate with the supplied strap. As the liquid boils, it is collected in the
bottle. When the engine cools, the water is recovered by the radiator. Includes
bottle, hoses, clamps, mounting strap and instructions.
No. 11-6291-E9722
$34.95
• Combines wrench and
bleeder valve into one
convenient and compact
tool.
• Bleeds brake systems
and hydraulic clutch
systems.
• Internal check valve for fast easy bleeding.
• Anodized billet aluminum handle with chrome moly steel body.
• Compact size for tight spaces.
• High quality internal seal.
• Multi position handle.
No.
No.
No.
No.
5953-E9571
6915-E9471
14-0442-E9571
14-0443-E9571
8mm nipple
3/8” nipple
10mm nipple
11mm nipple
$26.95
26.95
26.95
26.95
BATTERIES
CONTROLS
UTV
ACCESS.
CHINESE
PARTS
LUGGAGE
RACKS &
ACCESS.
RADIATOR CAP 1.1
BAR CHROME
CABLE LUBER
A replacement cap is the cheapest and easiest way to solve or troubleshoot
your liquid cooled bike/ATV radiator problems. This premium 1.1Bar (16PSI)
radiator cap is the factory recommended replacement for most vehicles.
• Direct replacement for factory radiator caps.
• High temperature corrosion resistant silicone seals.
Used to inject lubricant into cable housing.
Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the
far end, the cable is lubricated.
No. 5527-E9831
No. 12-7058-E9460
$22.95
$9.95
PLOWS &
IMPLEMENTS
RADIATOR CAP 1.6
BAR CHROME
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
Upgrading to a high pressure 1.6 BAR (23PSI) from the stock 1.1 BAR
(16PSI) is the simplest way to avoid over-boiling your engine. Raising your
cooling system’s maximum operating pressure increases your coolant’s boiling point, allowing you to ride harder and longer before radiator boil over.
• High Temperature corrosion resistant silicone seals.
• Upgraded performance from factory 1.1Bar (16PSI) radiator caps.
No. 5528-E9831
944
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$22.95
CABLE LUBRICATION TOOL
The easy way to lubricate the cables on your
machine. Just attach cable lube tool to either
end of the cable, insert the nozzle tube from
your cable lube (sold separately) and spray.
Cables need not be removed from machine.
No. 11-2409-E9540
$7.50
NOTE: Use PJ1 cable lube(PJ112) for best cleaning/lubrication ability.
2014
SHOP
FLYWHEEL PULLERS
HELMETS
All pullers made to precise standards equal to factory original tools or better. Each tool and bolts are black oxide plated for rust protection.
Tool hardness is softer than the motorcycle part to prevent damage to expensive crankshafts and flywheels. 5/8” fine thread bolts used
in all pullers.
APPAREL
Skin packaged for display.
by Dennis Stubblefield
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
2363 (MP16)
2364 (MP20)
4246 (MP31)
8204 (MP1)
8206 (MP6)
CHAINS &
SPROCKETS
8207 (MP7)
DRIVE
BRAKES
ENGINE
8208 (MP9)
8209 (MP10)
8210 (MP13)
8211 (MP19)
8324 (MP11)
AIR/FUEL
8466 (MP17)
CHEMICALS
ELECTRICAL
BATTERIES
8467 (MP18)
8771 (MP37)
8868 (MP21)
8869 (MP8)
11-0713 (MP30)
11-0721 (MP14)
CONTROLS
UTV
ACCESS.
CHINESE
PARTS
LUGGAGE
11-1927 (MP5)
11-1935 (MP29)
11-2659 (MP39)
11-3343 (MP42)
11-3344 (MP43)
11-3346 (MP46)
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
11-9647 (MP63)
12-4138 (MP64)
12-4857 (B201)
12-4858 (MP65)
12-7470 (MP73)
14-0487 (MP26)
MERCHANDISING
NOTE: Dennis Stubblefield part numbers are in parenthesis.
WWW.MARSHALLDISTRIBUTING.COM
TRAILER
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
945
SHOP
FLYWHEEL
PULLERS
by Dennis Stubblefield
HELMETS
NOTE: Because of year to year and mid-year changes by the O.E.M.s,
some models may take different pullers for the same year. Always
check sizes if possible!
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
Order No.
2363-E9331
2364-E9141
4246-E9946
8204-E9911
8206-E9660
8207-E9660
8208-E9470
8209-E9180
8210-E9291
8211-E9470
8324-E9380
8466-E9380
8467-E9780
8771-E9705
8868-E9380
8869-E9763
Order No. Application
4246
11-3343
11-3343
CHEMICALS
ELECTRICAL
8869
8204
BATTERIES
CONTROLS
UTV
ACCESS.
CHINESE
PARTS
11-3344
8206
8207
8208
8209
LUGGAGE
RACKS &
ACCESS.
8211
PLOWS &
IMPLEMENTS
8324
FRAME &
BODY
SHOP
TRAILER
Size/Description
26mmx1.0mm R.H. thread, Male
28mmx1.0mm R.H. thread, Male
50mmx1.5mm R.H. thread, Female
27mmx1.0mm L.H. thread, Male
18mmx1.5mm R.H. thread, Male w/hollow center bore
20mmx1.5mm R.H. thread, Male w/hollow center bore
20mmx1.5mm R.H. thread, Male
16mmx1.5mm R.H. thread, Male
8 hole disc 65mm dia. w/6mm bolts
14mmx1.5mmx45mm R.H. thread, Male
22mmx1.5mm R.H. thread, Male
18mmx1.5mm R.H. thread, Male w/hollow center bore
18mmx1.5mm R.H. thread, Male
Universal 12 hole disc w/6mm and 8mm bolts
20mmx1.5mm R.H. thread, Male w/hollow center bore
30mmx1.5mm R.H. thread, Female
11-9647
8466
8467
8868
MERCHANDISING
Retail
$21.50
21.95
100.95
18.95
10.50
10.50
11.95
12.75
29.95
11.95
12.95
12.95
13.95
78.95
12.95
56.95
ARCTIC CAT
ATV: Fits most 375, 400, 450, 500, 700cc 4-cycle models
UTV: 650 Prowler 4-cycle models
BMW
Cycle: Fits most 650-CS Rotax engine single cylinder models
BOMBARDIER/CAN-AM
ATV: DS650 ’00-07
HARLEY-DAVIDSON
Cycle: SX175/250 ’75-78 Densi ignition
HONDA
ATV: ATC/TRX70, ATC110 w/CDI, TRX125, ATC185/S,
TRX200/SX, ATC250R, FL250, TRX250R
Cycle: CRF50F ’04-09, MB5, NB50, SE50P, Z50R, ZB50,
C70, CT70, SL70, XL75, CH80, CR80R, CRF80F XL80/S,
XR80/R, CA100/102/105/110, XL100/S, XR100/R, CT110,
CR125R, CR250R, CR450R, CR480R, CR500R (all CR’s
’78-94)
Cycle: MR50 ’74-75, QA50 ’71-75, CH80 ’85-95
Cycle: CR250M Elsinore ’75-76
Cycle: MR250 ’76, MT250 ’74-76
Cycle: XR200R, XR250R, XR400R ’00-03, XR600R, XL650R,
XR650R ’00-07, VF500F, CB750 all ’69-E78
ATV: ATC90, ATC110 ’79-81 w/points
Cycle: CT90 ’77-79, CR125M ’73-78, CB175, SL175,
CM185T/200T, CRF230F, CM250, CMX250, CR250M
’73-74, CB350/360, CB350-4, SL350, CB400, CMX450,
CB500K/T, CB550SC, CBR600R (late model), CB650SC,
CB700SC
ATV: ATC125M, TRX125, ATC200, ATC200E/ES Big Red,
ATC200X, TRX200
Cycle: CB125/S, XL125/S, XL/XR185/S, XL200R, XR200/R
Cycle: XL250/350/500/600/650/R, XR250/350/500/ 600/R,
GB/FT500, VF500, VT500C/FT/600, NT/NX650, VF700,
VFR/VF750C/F/S, VT800/1100, VF1100C, V45, V65
Cycle: CRF450R ’02 (includes crankshaft and oil line cap)
Cycle: CB650, CB750 ’L78-83, CB900C, CB1000C (all 4
valve/4 cyl. ’78 and later)
Cycle: CB650SC
ATV: ATC250ES Big Red, ATC250SX, TRX250/X, TRX300/EX,
ATC350X, TRX350
Cycle: XR250R, XR600R, CB400T/450T, CM400/450,
CX500/650, GL500/650, VT600/750/800/1100, PC800
Order No.
11-0713-E9651
11-0721-E9832
11-1927-E9662
11-1935-E9714
11-2659-E9244
11-3343-E9754
11-3344-E9901
11-3346-E9851
11-9647-E9942
12-4138-E9714
12-4857-E9714
12-4858-E9433
12-7470-E9893
14-0487-E9054
Size/Description
24mmx1.0mm R.H. thread, Female
30mmx1.5mm R.H. thread, Female
35mmx1.5mm R.H. thread, Female
35mmx1.5 R.H. thread, Female
42mmx1.5mm R.H. thread, Female
38mmx1.5mm R.H. thread, Female
24mmx1.0mm R.H. thread, Male
26mmx1.0mm R.H. thread, Female
24mmx1.5mm R.H. thread, Female with
crankshaft and oil line cap included
33mmx1.5mm R.H. thread, Female
16mmx1.5mm R.H. thread, Male
30mmx1.0mm R.H. thread, Female
28mmx1.0mm R.H. thread, Female
40mmx1.5mm R.H. thread, Female
Retail
$24.95
37.95
41.50
64.95
68.95
70.95
16.95
24.95
38.95
64.95
64.95
51.95
61.95
69.95
Order No. Application
HONDA - cont’d.
11-1935 Fits some ATVs 35mmx1.5 R.H. external thread
12-4138 Scooter: CN250 Helix
12-7470 ATV: TRX450R ’04-09, TRX350 Rancher ’03-09
Cycle: CR250R ’78-80, CRF450R/X ’09, CRF 250R ’10
HUSABERG
11-3346 Cycle: FE250/650
KTM
8204
Cycle: 125/250cc 2 stroke ’97-00
11-3346 ATV: 450/525 XC-ATV ’08
Cycle: 400 and 620cc models ’88 to current.
12-4138 Cycle: Fits most electric start single cylinder 620, 625, 640,
660, 690 LC4E models
KAWASAKI
Cycle: KV75, KD80, KX80 all, KDX80, KE100, KH100,
8204
KM100, KS125, KDX200/250 ’89-92, KX125/250/500
’L89-92, KX8S, KX100
Cycle: KL250/600/650 KLR series, KLX250/300 (most) (See
8208
8324 for larger size.)
ATV: KLT110, KLF185, KLT200, KLF220, KLT250, KSF250,
8209
KLF300
Cycle: KX125A ’78-81, EX250, KX250A ’78-80, KH400A,
KX420A, EN450, EX500, KX500 ’83-E89, KZ/ZX550GPz,
ZX600, KZ750 GPz, VN750, ZX750, Z1 900, KZ1000 all
’77-80, KZ/ZX1100GPz, KZ1300
Cycle: KL250/600/650 KLR series (See 8208 for smaller
8324
size.)
8467
ATV: KLF185, KLF220, KLT250A ’82-83, KSF250, KLF300
Cycle: KZ200, EX250, KL250 ’78-83, KZ250, KZ440, EX500,
KZ550, ZX600, KZ650, KZ750, VN750, ZX750, KZ1000
’79-up, KZ1100, KZ1300
11-1927 ATV: KLT160, KLF185, KLF220, KLF300C 4x4
Cycle: Fits 1 cyl., 4 stroke Enduros w/large flywheel
11-0721 ATV: KLF300C 4x4
11-1935 ATV: KSF 250cc Mojave
11-3343 ATV: KSF250/400
12-7470 ATV: KFX450R ’08
Cycle: KLX450R ’08, KX450F ’09
POLARIS
12-4138 ATV: Predator 500
SUZUKI
4246
CYCLE: VR1800 ’06-07
Continued
946
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
2014
SHOP
FLYWHEEL
PULLERS
by Dennis Stubblefield
NOTE: Because of year to year and mid-year changes by the O.E.M.s,
some models may take different pullers for the same year. Always
check sizes if possible!
Order No. Application
Order No. Application
8204
8204
8209
8208
8210
8868
8869
11-0721
11-1935
11-3343
11-3344
11-2659
12-4138
12-7470
14-0487
11-3343
8204
SUZUKI - cont’d.
ATV: ALT/LT50, ALT/LT125, LT160, ALT/LT185, LT250R ’8592, LT500R ’87-90
Cycle: JR50, RM50, TS50, RM60, RM80, RV/TC/TS90,
DR100, TC/TS100, DR125, DS125, GN125, RM125 ’9093, SP125, TC/TS125, DR200, RM/RMX250 ’90-94
Cycle: GS550, GS650, GS750, GS1000, GS1100 ’80
Cycle: TL 1000 R & S
Cycle: RM80, RM125/250/370/400/465/500 ’75-89,
PE175/250/400, TS185, DR200, DR250 ’82-85, RL250,
TS250 ’69-75, DR370, DR400, TS400, DR500
Cycle: Most Burgman AN650 ’03-09 models
ATV: LT160, LT230GE, LT230S, LT250E, LT250S
Cycle: TM, TM250 TS250 ’76-81, TM400, Early DR 4-stroke
models
Cycle: GS1100E ’81-85, GS1150E chain
ATV: LT-F250, LT4WD, LT-F4WDX, LT300
Cycle: DR250/S, DR350/S, SP400, GSF400, GS1000G/GL,
GS1100G/GK shaft
Cycle: GN/GP/GS/GSX models (check thread size)
ATV: LT50, LTF250 ’03-09
Cycle: GS/GSXR600/750/1000 ’84-94
ATV: LTF250 Ozark ’06-09
Cycle: GSXR600 ’01-02, GSXR750 ’00-02, GSXR1000/1300
Cycle: RM-Z450 ’07-08, RM-Z450 ’08
Cycle: GSXR1000 ’09 to Present. May also fit some Marauder
and VS Intruder models.
TRIUMPH
Cycle: 675 Daytona ’06-08
YAMAHA
ATV: YT60, YFM80, YFM100, YFA125, YT125, YT175,
YFM200, YFS200 Blaster, YTM200, YFM225, YTM225,
YFZ350 Banshee
11-1935
8206
8207
8209
11-0713
8771
12-4858
12-4138
2363
2364
11-3346
8204
11-1927
11-1935
11-3344
12-4857
HELMETS
YAMAHA - cont’d.
Cycle: DT50, PW50, Riva ’83-91, YSR50, JT1 60, BW80,
HT1,90/100, AT1 125, CT1 175, IT200, DT1/250, IT250,
WR250, YZ250/WR ’L88-92, YZ 250F ’03-05 RZ350,
TT350, RT1 360, DT400, IT400/425/465/490, MX400,
YZ400F/465/490, YZ426/450F ’03-05, TT500, XT500
ATV: YFM350ER/FW/FX/X, YFZ350 Banshee YFM350X
Warrior (NOTE: Most Banshees may use no. 8204 with
30mm threads) Rhino 700cc
Cycle: YZ125 ’81-92 L.C. w/small rotor
Cycle: MX125, YZ125 ’74-80, MX250, RD250, YZ250 ’75E
88, R5 350, MX360, YZ360 ’75
Cycle: TT225, RD250, 305, RS350, RD350, FZR400, RD400,
XJ550, FJ600, FZ600, FZR600, XJ650, XJ700, FZR750,
XJ750, XJ900, FZR1000, FJ1100, FJ1200
Cycle: XS650 twin cyl. ’70-83
ATV: YFM200DX, YFM225, YFM250 ’89, YFM600/660
Cycle: BW200, BW350, XV535, TT600, XT600,
XV700/750/920/1100 Virago, XVZ1300 Venture
Cycle: WR250F ’03-09
Cycle: WR450F ’04-09
MISCELLANEOUS
Scooter: Fits most 125-150cc ’60s-70s Vintage Vespa models and many Bajaj Chetak models.
Scooter: Fits most Vespa models
Scooter: Removes clutch from most small frame Vespa
models
Cycle: Bridgestone, Hodaka, KTM 4-cycle, Steens, Rickman,
Tohatsu
Scooter: Fits many import models 125-150cc GY6 4-stroke
series engines
Cycle: Rotax 600cc
Fits 4 stroke Cycle models
Scooter: Fits most import Scooter models with 6Y6 QMB139
Engines
Fits 2-cycle Mercury models ’70 & latest
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
FLYWHEEL PULLER
CHINESE
PARTS
Fits YAMAHA : WR250F ‘03-06
• Replaces OEM tool YM04141.
• M30 x 1.0 R.H Internal.
UNIVERSAL FLYWHEEL PULLER
Special 12 hole universal flywheel puller disc with 6mm and 8mm bolts. Fits
most Polaris models.
No. 12-8261-E9151
$22.95
No. 8771-E9705
$78.95
Universal
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
Includes all
necessary hardware.
FLYWHEEL PULLER
FLYWHEEL PULLER
Puller kit for pulling magneto flywheel or starter gear on Kawasaki Jet Ski
300/440/500. Will also fit Yamaha WR400F flywheel. Includes three 6 x 25
and three 8 x 40 bolts.
Universal flywheel puller for all watercraft, snowmobile, motorcycle and other
small engines. Complete with hardware kit and adapters for male or female
removal.
No. 12-7054-E9491
No. L855-E9952
$29.95
WWW.MARSHALLDISTRIBUTING.COM
Import
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$42.95
947
SHOP
TRAILER
MERCHANDISING
SHOP
SHOP EQUIPMENT
HELMETS
APPAREL
SPANNER FOR HONDA
Replaces 20mm OEM #07716-0020100.
• Used to remove Honda OEM nut 90231-KY4-900.
• 4-Pin spanner made of heat-treated steel.
PROTECTIVE • Fits counter balancer nut on:
GEAR
CRF450R ‘02-06, CRF450X ‘05.
CLUTCH SERVICE TOOL
EYE
PROTECTION
TIRES/
WHEELS
No. 12-8253-E9060
Fits all driven clutches. Comes with splined or keyed hold down posts. Will
work on many drive clutches. Baked-on powder coat finish.
$9.30
20mm 4-Pin
No. 15-0541-E9945
$79.95
EXHAUST
CLUTCH TOOL
CHAINS &
SPROCKETS
DRIVE
CLUTCH HOLDING TOOL
1/2” DRIVE x 4 PRONG
Removes starter clutch from most import GY6 engine models:
125cc, 150cc, 180cc.
No. 6995-E9561
$27.70
Made from medium carbon steel with hardened jaws. Hold clutch hubs,
flywheels, gears, sprockets, etc. Features 8mm spanner pins. Jaws open
up to 5” wide.
BRAKES
No. 12-7034-E9861
$25.95
ENGINE
CLUTCH PULLER
AIR/FUEL
For removal of 4-Stroke Honda ATV clutches. TRX400 Foreman ’00-03,
TRX450 Foreman ’00-04, TRX500 Foreman ’00-09 and TRX500 Rubicon
’00-09.
CHEMICALS
No. 4245-E9814
35mm x 1.0 right hand thread - female
$64.95
40mm x 1.5 right hand thread - male
$45.95
TRX500 Rubicon series.
ELECTRICAL
No. 4582-E9492
CLUTCH BUTTON TOOL
Used to service Polaris.
No. 11-9447-E9921
$19.95
BATTERIES
CONTROLS
UTV
ACCESS.
CHINESE
PARTS
CLUTCH HUB REMOVER TOOL
HARLEY: This tool is used for removing the clutch hub from the transmission mainshaft. For FL models ’30-70.
No. 11-2660-E9741
$22.95
LUGGAGE
Convenient kit includes 80 pieces of stepless ear clamps, a jaw pincer tool, and
a convenient fuel line clamp size chart.
RACKS &
ACCESS.
CLUTCH BUTTON RETAINER CLIPS
PLOWS &
IMPLEMENTS
FRAME &
BODY
A must when taking your clutches apart. Holds buttons in place both during assembly and disassembly.
No. 11-5953-K9551
SHOP
Pkg of 3
$22.95
No. 14-0444-E9367
Package of three TRA clutch button retainer clips.
No. 7268-K9380
948
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$13.95
$117.50
Description
Qty.
Description
Qty.
7.8 mm to 9.5 mm range
10 10.8 mm to 13.3 mm range 10
8.8mm to 10.5 mm range
10 12.0 mm to 14.5 mm range 10
9.6 mm to 11.3 mm range 10 13.2 mm to 15.7 mm range 10
10.3 mm to 12.8 mm range 10 14.8 mm to 18.0 mm range 10
SKI DOO TRA CLUTCH
BUTTON RETAINER CLIPS
TRAILER
MERCHANDISING
80 PIECE STEPLESS® CLAMP FUEL LINE FITTING KIT
with PINCER TOOL
PINCER TOOL
Use to crimp vinyl or Tygon fuel line to fittings. O-clip pincer tool is available
to install and remove the O-clips.
No. 11-9398-E9921
$19.95
2014
SHOP
SUSPENSION TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
SHOCK ADJUSTING TOOL
Spanner wrench used to adjust spring compression on many motorcycle and
ATV rear shocks including Polaris. Also fits FL/FX 4 speed ’58-86, XL ’58-74.
Replaces Harley no. 94700-65. Zinc plated.
SHOCK SPRING COMPRESSOR
• Lever action shock service tool that makes spring compressing easy while
one hand is free to remove spring retainer.
• Works on all snowmobile, motorcycle and ATV shocks that require a
spring compressor.
• Durable powder coat finish.
No. 15-0542-E9992
No. M66300-E9290
$15.50
EXHAUST
CHAINS &
SPROCKETS
DRIVE
BRAKES
$42.95
ENGINE
AIR/FUEL
CHEMICALS
SHOCK SPRING INSTALLATION TOOL
Used for removing springs from the suspension shock. Quick, simple, and
safe. Use for adjusting spring tension or removal and installation of spring.
The shock spring tool makes easy work of removing and replacing shock
springs used on snowmobiles, (front and rear), ATVs and dual shock motorcycles. The simple design allows spring removal in seconds. Gold zinc plated
with PVC handle cover.
No. 7620-E9333
No. 6617-E9332
SHOCK SPRING TOOL
$49.95
$35.95
ELECTRICAL
BATTERIES
CONTROLS
UTV
ACCESS.
CHINESE
PARTS
LUGGAGE
SHOCK SPRING ADJUSTER TOOL
RACKS &
ACCESS.
This tool belongs in every rider’s tool box. Allows simple adjustment of spring
preload (to adjust ride height) without damaging shock or spring collars.
Hinged action allows use on a wide variety of preload collar sizes.
No. 11-3164-E9990
PLOWS &
IMPLEMENTS
$16.50
FRAME &
BODY
SHOCK SPANNER PUNCH TOOL
• Ideal tool for turning hard to reach lock ring and preload ring on rear
shocks.
• Angled brass tip gives secure bite and protects ring from damage.
• Heavy duty construction.
• Long shaft to reach hard to get at shocks.
SHOCK ADJUSTER WRENCH
Universal. Also works on Ohlin shocks on Yamaha’s.
No. 11-8493-E9930
WWW.MARSHALLDISTRIBUTING.COM
$6.75
No. 5135-E9611
$17.95
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
949
SHOP
TRAILER
MERCHANDISING
SHOP
SUSPENSION TOOLS
HELMETS
APPAREL
EYE
PROTECTION
PROTECTIVE
GEAR
TIRES/
WHEELS
EXHAUST
CHAINS &
SPROCKETS
T-STEM NUT WRENCH
NITROGEN NEEDLE KIT
Nitrogen needle is used to fill shocks with self-sealing rubber valve (some
Yamaha, Fox and Ohlins).
• 22 gauge, 1” needle.
• Instructions included.
No. 11-3176-E9631
No. 12-9012-E9110
Kit
Replacement Needle
$21.25
1.75
Each wrench is model specific for loosening of the T-Stem nut on late model
motocross bikes and some sport bike applications without removing the
handlebars. The opposite end allows for adjustment of the T- Stem bearings.
No.
No.
No.
No.
12-7064-E9582
12-7065-E9582
12-7066-E9582
12-7067-E9582
$43.95
43.95
43.95
43.95
Honda (32mm)
Kawasaki (32mm)
Suzuki (32mm)
Yamaha (30mm)
DRIVE
BRAKES
ENGINE
AIR/FUEL
CHEMICALS
ELECTRICAL
DELUXE SUSPENSION BEARING SERVICE TOOL
RydeFX’s rebuildable gas fill tool can easily be disassembled and reassembled for needle replacement using standard wrench sizes. Gas fill tool
comes standard with pressure gauge and 5 pack replacement needles.
Compatible with FOX™ and Arctic Cat ACT™ shocks and many others with
self sealing rubber valves.
• Designed for quick removal and precise installation of suspension linkage
and swing arm pivot bearing.
• Designed for 20 and 22mm ID bearings.
• Fits most off-road motorcycles and ATV.
• Includes blind bearing collet for removal of 20mm blind bearings, blind
bearing puller adapter, which can be used as an accessory with the
Motion Pro Blind Bearing Remover set.
• Anodized aluminum mandrels reduce the possibility of damaging surfaces
• Laser etched markings for easy size identification.
No. FX390300-K99251
No. 3121-E94101
BATTERIES
GAS SHOCK FILL TOOL KIT
CONTROLS
UTV
ACCESS.
CHINESE
PARTS
$234.95
$155.95
LUGGAGE
RACKS &
ACCESS.
PLOWS &
IMPLEMENTS
FRAME &
BODY
SHOP
TRAILER
MERCHANDISING
FOLDING SAG SCALE
6061 T-6 aluminum construction. Rigid folding design fits in most tool boxes.
Direct reading scale (no subtracting required). Adjustable zero set point with
extended range. Will work on mini and full size motorcycles. Inch and metric
scale combination. Installs in rear axle. Can be used to check front or rear
sag. Extended length 28-1/4”, Folded length 15-3/4”.
• Easy way to keep your fork seals clean and debris free.
• Extracts dirt and debris trapped between fork seal and tube.
• Will work on conventional and up-side down forks.
No. 12-7083-E9272
No. 12-8265-P9044
950
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$41.95
SEAL MATE
12/pkg
$67.80/pkg
2014