POWERFUL. DURABLE. 2008 Product Guide PROFESSIONAL.

Transcription

2008 Product Guide
POWERFUL.
DURABLE.
PROFESSIONAL.®
FREE Parts. FREE Service. FREE Batteries. For LIFE.
This FREE, unprecedented protection covers all defects in workmanship or materials and
normal wear items for the lifetime of the original, registered tool owner. Items covered include:
brushes, chucks, motors, switches, cords, gears, even BATTERIES for Power Tools; and
O-rings, piston stops and driver blades for Pneumatic Nailers/Stapler only.
Registration required for the Lifetime Service Agreement. Visit www.RIDGID.com or fill out a registration form to register.
Details about the Lifetime Service Agreement can be found on the website, registration form, or by calling 1-866-539-1710.
Tools not registered for the Lifetime Service Agreement are still backed by the 3-Year Limited Service Warranty.
Cordless Systems Combo Kits Drills
Impact Drivers
Jobsite Radio Batteries and Chargers
Circular Saw Reciprocating Saw
Hand Planer Jig Saw Adhesive/Caulk Gun
Corded
Drills and Wrenches Circular Saws
Reciprocating Saw
Jig Saw
Angle Grinders
Routers Sanders
Bench and Stationary
Miter Saws Table Saws Utility Vehicles
Band Saw
Drill Press
Thickness Planer
Jointer/Planer
Cut-Off Machine
Belt/Spindle Sander
Pneumatic Hand Tools Compressors Hose
Pressure Washers
Wet/Dry Vacs
Vacs Vac Accessories
Inspection
Saw Blades
Hole Saws
Drill Bits
Extension Cords
Storage Chests Awards
Warranties
Index
2 – 13
3
4–5
6–7
6, 13
8
9
11
12
12
13
13
14 – 25
15 – 17
18 – 19
20
20
21
22
23 – 25
26 – 35
27 – 29
30, 32
30 – 31
33
33
34
34
35
35
36 – 43
36 – 40
41 – 43
43
44 – 45
46 - 48
46 – 47
48
49
50
51 – 52
52
53
54
55
56 – 59
60 – 61
* All RIDGID® tools include an Operator’s Manual, which
should be read and understood before using the product.
Covered For Life
Page 56
»
2
Faster. Stronger. Longer.™
Cordless systems
RIDGID ® Flexibility
RIDGID® batteries – 18 volt NiCad, 18 and
24 volt Lithium-Ion systems – deliver classleading run times, charge times and lifetimes
to help you work more productively,
charge after charge. RIDGID’s industrypioneering Dual Voltage MaxSelect™ tools
run on every RIDGID® 18 volt and 24 volt
battery made – NiCad and Lithium-Ion
alike. Assemble the mix of batteries you
choose, and use them all interchangeably
in the same cordless tools. Gains include
instant access to extra power when you
need it and fewer walks to the charger
each day.
Why Lithium-Ion? RIDGID® Lithium-Ion
batteries are equal or less weight than
NiCad batteries and run up to 160% longer
than their Ni-Cad counterparts. With fadefree power over its lifetime, the lithium
ion battery has the best energy-to-weight
ratio, no memory loss, and a slower loss
of charge when not in use compared to the
NiCad Batteries. With RIDGID® Lithium-Ion,
your first use is as powerful as the last.
RIDGID® cordless offerings range from hitthe-ground-running combo kits and tool kits
with chargers and batteries, to individual
MaxSelect™ powerhead-only tools that
accept all the RIDGID® batteries you already
own. This range of choice helps you build
a lean, capable, custom-tailored cordless
tool system with everything you need –
and nothing you don’t.
3
CORDless Combo Kits
RIDGID® cordless combo kits combine everything needed to quickly build your cordless tool collection and your
productivity: tools, batteries, charger, and rugged carrying bag. All built with RIDGID’s exceptional engineering,
all delivering RIDGID’s outstanding performance, and all backed by the exclusive Lifetime Service Agreement –
free parts, free service, and free batteries for the life of the original registered tool owner.
Why Lithium-Ion? RIDGID® Lithium-Ion batteries are equal or less weight than NiCad batteries and run up to 160%
longer than their Ni-Cad counterparts. With fade-free power over its lifetime, the lithium ion battery has the best
energy-to-weight ratio, no memory loss, and a slower loss of charge when not in use compared to the NiCad
Batteries. With RIDGID® Lithium-Ion, your first use is as powerful as the last.
24 V Lithium-Ion 3-Pc. Combo Kit
Dual Voltage, 18 and 24 Volt Compatible
Model Number: R931
Specifications:
Hammer Drill/Driver:
Chuck: 1/2 in.
No Load Speeds: 0-400 / 0-1,500 r/min.
0-6,400 / 0-24,000 BPM
Torque: 615 in.lbs.
Clutch: 24 position
Reciprocating Saw:
Stroke:
1-3/16 in.
No Load Speeds: 0-2,500 SPM
Charger: Charge Time:
1 Hour
Features:
• Single sleeve locking carbide chuck – tightens bits
quickly and securely
• Clutch by-pass – switch from driving to drilling
or hammer drilling without having to change the
clutch settings
•Powerful 2-speed die-cast gearbox – delivers
exceptional torque and rugged reliability
•High torque 24 volt motor – supplies the power to
do heavy jobs
FREE
Batteries
4
Reciprocating Saw:
•Tool-free blade clamp – makes blade
changes faster and easier
•Tool-free shoe adjustment – allows easy
adjustment of shoe with one hand
•Variable speed trigger switch – for easier
speed control and precise starts
•Push-on, push-off lock off button – easier
to actuate and more user friendly
Includes:
R851150 hammer drill,
auxiliary handle assembly,
R854 reciprocating saw,
R859 work light, 1 bulb,
2 reciprocating blades,
2 Lithium-Ion battery packs, charger,
and heavy duty contractor bag
Award winning technology,
page 55
»
18 V Lithium-Ion 4-Pc. Cordless Combo Kit
Model Number: R964
Specifications:
Circular Saw:
Chuck: 1/2 in. carbide
locking jaws
Arbor Size: 5/8 in.
No Load Speeds: 0-450 / 0-1,600 r/min.
0-7,200 / 0-25,600 BPM
Blade Size: 6-1/2 in.
No Load Speed: 2,500 r/min.
Clutch: 24 position
Torque: 610 in.lbs.
Cutting Depth:
2-1/8 in. @ 0°
1-5/8 in. @ 45°
Reciprocating Saw:
Stroke: 1-3/16 in.
No Load Speeds: 0-2,500 r/min.
Impact Driver:
Coupler: 5/8 in.
Torque:
1,450 in.lbs.
Charger:
Charge Time:
45 min.
Features:
Circular Saw:
• Locking single sleeve carbide chuck – to hold bits securely
• High torque 2-speed transmission – for matching power to the task
• High impact torque adjustment ring, 24 position clutch – for durability
and lighter weight
• High speed gearbox with hammer function – for masonry
and concrete work
• Automatic spindle lock – makes bit changes easier
Reciprocating Saw:
•Tool-free blade clamp – for quick blade changes
•Pivoting shoe – adjusts for cuts at almost any angle
•Variable speed switch with brake – for the right speed to suit the task
•Aluminum guard and base – for high strength and low weight
•6-1/2 in. carbide tipped blade – for increased cutting capacity
•Spindle lock – for easier blade changes
•Double reduction gearing – for increased torque
Impact Driver:
•Die-cast gearbox – for durability and repeatability
•1/4 in. hex quick coupler – makes bit changes quicker and easier
•High torque output – for the most difficult driving tasks
Includes:
R8411503 Hammer drill, R8452 circular saw, R8442 reciprocating saw, R842301
impact driver, single port charger, 3.0 Ah Lithium-Ion battery pack (2), auxiliary
handle assembly, double ended screwdriver bit, edge guide, circ saw blade,
2 reciprocating blades, and heavy duty contractor bag
FREE
Batteries
5
CORDless Drills
12 Volt Right-Angle Impact Driver Kit
Model Number: R82233
Specifications:
Impacts per Minute: Max Torque: Collet Size: No Load Speeds: Charge Time:
0-3,100
700 in.lb.
1/4 in. hex
0-2,200 r/min.
20 min.
Includes:
1 NiCad battery pack, charger, 20 minute charger,
1 single ended impact bit, and case
Features:
• High torque motor and gearbox design – the power to complete the task
• Die-cast gearbox – for greater reliability and dependability
• 1/4 in. quick coupler – for quick and easy bit changes
• Variable speed paddle switch – slow, easy starts and fast finishes
• Forward/reverse selector – conveniently located for inserting and removal tasks
• Mar resistant head cover – helps protect workpiece from accidental damage
• Compact right-angled head – allows close-quarters operation
FREE
Batteries
18 Volt Lithium-Ion Hammer Drill
Specifications:
Battery:
Chuck:
No Load Speeds:
Torque:
Clutch:
Charge Time:
3.0 amp hour Lithium-Ion
1/2 in.
0-450 / 0-1,600 r/min.
0-7,200 / 0-25,600 BPM
610 in.lb.
24 position
45 min.
Includes:
2 Lithium-Ion battery packs, 45 minute charger,
screwdriver bit, and heavy duty contractor bag
FREE
Batteries
6
Features:
•Powerful 2-speed die-cast gearbox – delivers exceptional torque and
rugged reliability
• High torque 24 volt motor – supplies the power to do heavy jobs
• Adjustable auxiliary handle assembly – rotates 360°
for ease in positioning
• Single sleeve locking carbide chuck – tightens bits quickly and securely
• Automatic spindle lock – open and close chuck with one hand
• Clutch by-pass – switch from driving to drilling or hammer drilling
without having to change the clutch settings
•Ergonomic overmold gripping areas – provides user comfort
and better grip
• Slide-mount battery pack – easily load-n-lock with one hand
NEW
18V Compact Lithium Ion Drill
Specifications:
Features:
Torque: 455 in.lbs.
•1/2 in. Single Sleeve Locking Carbide Chuck – tightens bits quickly and securely
Chuck: 1/2 in.
• Automatic Spindle Lock – open and close chuck with one hand
No Load Speeds: Clutch: 0-450 / 0-1, 600 r/min. • High Impact Torque Adjustment Ring, 24 Position Clutch – for durability and
lighter weight
24 position
Charge Time: 30 min.
• High Capacity Lithium-Ion Batteries – longer run time – more work per charge
• LED light – illuminates work area
Includes:
• Lithium-Ion battery – lighter weight, longer runtime
2 Lithium-Ion battery packs,
30 minute charger,
• Fast charger – charges your battery in 30 minutes
so you keep working
FREE
Batteries
NEW
12 V Lithium-Ion Drill/Driver
Specifications:
Features:
Torque: 120 in.lbs.
•Integrated clutch and chuck – allows a more compact design
Chuck: 3/8 in.
• 18 Position clutch – gives greater versatility in screw driving
No Load Speeds: 0-575 r/min.
• 3/8 in. Single sleeve chuck – takes 1/4 in. hex and conventional round bits
Clutch: 18 position
• Ergonomic handle – overmold provides improved comfort and grip
Charge Time: 30 min.
• LED light – illuminates work area
• Lithium-Ion battery – lighter weight, longer runtime
Includes:
• Cartridge-style battery – integrated into the handle for improved balance
2 Lithium-Ion battery packs,
30 minute charger,
• Fast charger – charges your battery in 30 minutes so you keep working
FREE
Batteries
NEW
7
Jobsite Radio
The Jobsite Radio Built for iPod
There’s a beast inside this heavy-duty roll cage. A hard-rocking sound system roars to life when you dock
your iPod in its protective front compartment. As your iPod charges, the system pumps out tunes through
its high-powered speakers to amp up the jobsite and make your day fly by. The RIDGID® Jobsite Radio tunes
in AM/FM and Auto Race channels, too - so it’s as great at the track as it is on the job. It runs on AC power or
any RIDGID® 12-volt through 24-volt slide-mount battery, Ni-Cad and Lithium-Ion. And it’s as innovative and
“loaded” as our tools, with a side-mounted 12-volt DC output that lets you charge cell phones or other small
devices while you listen, a 4-level bass boost, 10-channel digital tuning, a backlit LCD display, digital clock, and
battery memory backup. The RIDGID® Jobsite Radio. Crank it up, and you’ll know. RIDGID® Rocks Harder.
Job-Site Radio / Race Scanner
Model Number: R8408
Specifications:
Voltage:
AM Frequency Range:
FM Frequency Range: Race Frequency Range:
120 V AC / 12 V DC – 24 V DC
(RIDGID® slide-mount batteries, Ni-Cad or Li-Ion)
520 kHz – 1710 kHz.
87.5 mHz – 108.1 mHz
450.0375 mHz - 469.9625 mHz
Features:
•3.5 mm auxiliary audio input – for the connection of any MP3 player (located behind front door)
• Front compartment door – helps protect your iPod or MP3 player from the
hazards of the job-site environment
• Heavy duty roll cage – rugged, dependable protection for your radio
• 12 V DC 1 amp receptacle – charge your cell phone or other small device while
listening to music
•Top tray – a place to keep your cell phone or other small items while charging
through the 12 V receptacle
Includes:
Aux. audiopatch cord, and AAA batteries
18 and 24 volt batteries not included
NEW
8
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
"Made for iPod" means that an electronic accessory has been
designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
Lithium-Ion/Ni-Cd Charger
Model Number: AC470013
Specifications:
Volts: 9.6 V to 18 V slide-mount batteries
Charge Time:
• Compact Ni-Cad: 20 min.
• Max Batteries: 30 min.
• Compact Li-Ion: 30 min.
• 3.0 Ah Li-Ion: 45 min.
Features:
• Charges all RIDGID® 9.6 V – 18 V Lithium-Ion and Nickel Cadmium slide-mount
style battery packs
• LED diagnostics – indicates cold, hot, deeply discharged and damaged packs
18 Volt MAX 2.5 Ah Battery Pack
Specifications:
Volts: 18 V
Capacity: 2.5 Amp/hour
Chemistry:
Ni-Cad
Features:
• 18 V High Capacity Battery – for maximum run time
• Use with RIDGID® 18 V and MaxSelect™ tools
18 Volt Lithium-Ion Battery Pack
Specifications:
Volts: 18 V
Chemistry:
Lithium-Ion
Features:
• 18 V, 3.0 Ah capacity Lithium-Ion battery – lightweight and maximum run time
• Use with RIDGID® 18 V, 24 V, and MaxSelect™ tools
24 Volt 3.0Ah Lithium-Ion Battery Pack
Specifications:
Volts: 24 V
Chemistry:
Lithium-Ion
Can be ordered from 1-866-539-1710
or www.ridgidparts.com part number
130377001
Features:
• Compatibility – works with all RIDGID® XLi™ and MaxSelect™ tools
• Charge level indicator – check battery charge level any time at the push of a button
• Less weight – supplies 24 volt power at an 18 volt weight
• 3.0 Amp/hour high capacity Lithium-Ion battery pack – up to 160% longer run time
Award winning technology,
page 55
»
9
10
You Have the Power to Choose
Dual Voltage Tools
Batteries and charger sold separately. Page 9
«
Power any MaxSelect™ tool with
any RIDGID® 18 V or 24 V battery
18V or 24 V Lithium-Ion Batteries supply full power through the full charge plus
extra speed and ultra long run time. The 24 V Xli™ batteries also have a built-in
“fuel gauge” as an added feature, so you always know how much power you’ve
got before you need to recharge. Even use the RIDGID® 18 V NiCad
batteries you already own.
Dual Voltage Circular Saw
Model Number: R885
Specifications:
Volts:
18V NiCad; 18V or 24V Li-Ion
Arbor Size:
5/8 in.
Blade Size:
6-1/2 in.
No Load Speed:
3,900 r/min. @ 24 V
Cutting Depth:
2-1/8 in. @ 0°
1-5/8 in. @ 50°
Features:
• Works with both 24 volt and 18 volt battery systems
• Magnesium upper and lower guards – for greater strength
and lighter weight
• Composite base – super high strength composite shoe designed to
withstand severe impacts without bending or breaking
• 0-50° bevel capacity with 45° positive stop – quick release design for fast bevel adjustments
• Ratcheting lock levers – can be
secured in multiple positions
Includes: Blade and blade wrench
Batteries and charger sold separately
11
Dual Voltage Reciprocating Saw
Model Number: R884
Specifications:
Volts:
Stroke:
1-3/16 in.
No Load Speeds:
0-2,500 SPM @ 24 V
Features:
Includes: 2 blades
• Works with both 24 volt and 18 volt slide-mount battery systems
• Variable speed switch – for easier speed control and precise starts
• Tool-free blade clamp – makes blade changes faster and easier
• Tool-free shoe adjustment – allows adjustment of shoe with one hand
Dual Voltage Hand Planer
Model Number: R888
Specifications:
Volts:
No Load Speed: 1,3000 r/min. @ 24 V
Features:
• Belt drive – quieter and easier to maintain
• 0 - 1/16 in. depth adjustment – micro-settings for finer
depth control
• Rabbeting capability – make rabbet cuts up to 1/2 in. depth
• Automatic rear stand – protects surfaces from accidental
planer contact
• Replaceable spiral cut planing blades – provide a smoother,
faster, easier cut that doesn’t “stutter or dig” into the wood
12
Includes:
Blade set, blade wrench,
edge/rabbet guide and dust bag
Dual Voltage Jig Saw
Model Number: R883
Specifications:
Features:
Volts:18V NiCad; 18V or 24V Li-Ion
Stroke:1 in.
• Variable speed switch – for easier speed control and precise starts
No Load Speed:2,200 SPM @ 24 V
• Dual bevel cutting – base allows both right and left bevel cutting
• Tool-free blade clamp – for quick easy blade changes, accepts T-shank blades only
• Tool-free shoe adjustment – allows adjustment of shoe with one hand
Dual Voltage Impact Driver
Model Number: R8823
Specifications:
Volts:
Torque:
1,490 in.lbs.
Collet size:
1/4 in. hex
No Load Speeds: 0-1,700 r/min.
0-2,900 BPM @ 18 V
0-2,100 r/min.
0-3,300 BPM @ 24 V
Features:
• High torque motor and gearbox design – the power to complete the task
• Die-cast gearbox – for greater reliability and dependability
• 1/4 in. quick coupler – for quick and easy bit changes
• LED light – allows use in areas with limited lighting
Includes: Single ended impact bit
Dual Voltage Adhesive/Caulk Gun
Model Number: R8804
Specifications:
Volts:
Tube Capacity:
10 oz. and 30 oz.
Includes: Joist follower
Features:
• Works with both 24 volt and 18 volt battery systems
• Auto pressure relief – automatically relieves pressure when switch is released
• Adjustable speed control – set maximum speed to suit material application
• Variable speed switch – allows variable speeds within an adjustment range
• Two-finger plunger rod handle – easier to grip, even with gloves
• Dual capacity tube holder – holds both 10 oz. and 30 oz. tubes
Available only in certain markets.
Can be special ordered through your RIDGID® retailer.
Visit www.homedepot.com
13
14
Covered For Life
Page 56
»
Corded
Handheld corded tools from RIDGID® combine the power you need, the features you want and the
durability you deserve. In keeping with this, every RIDGID® handheld AC tool features a 12 ft. cord
that can easily be wrapped up for storage with a Micro Fiber™ "hook and loop" strip. The heavy duty,
all-rubber construction of the cords ensures durability and keeps the cord pliable in even the coldest
weather. These cords also feature lighted icons on each plug to let you know at a glance which tools are
“live.” All of which makes RIDGID® corded power tools a clear choice.
Heavy Duty ½" 2-Speed Hammer Drill
Model Number: R5011
Specifications:
Features:
Input: 120 V AC, 8.5 Amps
No Load Speeds: 0-1,000 / 0-3,000 r/min.
• All metal gear case – for high
strength and added durability
0-19,000 / 0-57,000 BPM
Chuck Capacity: 1/2 in.
Tool Weight: 5.8 lbs.
Cord Length: 12 ft.
Includes:
Auxiliary handle assembly, depth-stop
rod, chuck key, key strap, and heavy duty
contractor bag
• Durable 8.5 Amp motor with hardened
steel gears – built to exacting
specifications for extended tool longevity
• Automatic clutch – reduces stress load on
motor and gearing
• Dual speed/torque gearbox – allows the
user to set the drilling speed to match the
application. Use 1st gear for high torque
and 2nd gear for max drilling speed
• Ergonomic two-finger trigger – features
full range speed control and molded soft
grip design
• Heavy duty keyed chuck – all metal design
for positive bit retention and added durability
• 360° auxiliary handle assembly with
depth-stop-rodwhich can be repositioned for
precise control of drilling depth
XVR Anti-Vibration System
The XVR reduces and absorbs hammer vibrations by acting like a shock
absorber between the hammer action and the handle for more comfortable
operation and decreased user fatigue
15
Drills
Heavy Duty ½" VSR Drill
Model Number: R7111
Specifications:
Features:
Input: 120 V AC, 8 Amps
No Load Speeds: 0-850 r/min.
• Heavy duty 1/2 in. keyed chuck – all metal design
for added durability and positive bit retention
Tool Weight: 5 lbs.
Cord Length: 12 ft.
Includes:
Auxiliary handle assembly, chuck
key, chuck key holder, and heavy
duty contractor bag
• 360° auxiliary handle assembly – can be repositioned
or removed with ease
• All metal gear case – for high strength and added durability
• Ergonomic two-finger trigger – features full range speed control and
molded soft grip design
• Durable 8 Amp motor with hardened steel gears – built to exact
Heavy Duty ½" VSR Hammer Drill
Model Number: R5013
Specifications:
Features:
No Load Speeds: 0-2,700 RPM
0-51,000 BPM
• Heavy duty 1/2 in. keyed chuck – all metal design for added
durability and positive bit retention
Tool Weight: 5 lbs.
Cord Length: 12 ft.
Includes:
Auxiliary handle assembly, chuck key,
chuck key holder, depth-stop rod,
16
• 360° Auxiliary Handle Assembly with Depth-Stop Rod – depth stop
can be repositioned for precise control of drilling depth
• All metal gear case – for high strength and added durability
• Ergonomic two-finger trigger – features full range speed control and
molded soft grip design
• Durable 7.5 Amp motor with hardened steel gears – built to exact
Heavy Duty VSR Drywall Screwdriver
Model Number: R6000
Specifications:
Features:
Input: • Adjustable nose piece – to set consistent driving depth
120 V AC, 6.5 Amps
No Load Speeds: 0 - 4,000 r/min.
• 6.5 Amp motor with hardened steel gears – for tool longevity
Tool Weight: 3 lbs.
• Auto-stop brushes – for extended life
Cord Length: 12 ft.
• Variable speed – to select ideal driving speed
Includes:
• Ergonomic trigger – use two-fingers to reduce hand fatigue
P2 and R2 bit tips and
magnetic bit holder
• Die-cast gear housing – for added durability
• Lock-on button – for continuous driving
Heavy Duty ½" Spade Handle Drill
Model Number: R7121
Specifications:
Features:
• 9 Amp heavy duty motor with hardened steel gears – ensures tool longevity
Chuck Size: 1/2 in. keyed
No Load Speed: 500 r/min.
• Triple gear reduction – increases torque for use with large
diameter accessories
Cord Length: 12 ft.
Includes:
• 5/8 in. spindle – for increased strength in high torque applications
• Easily accessible brushes – can be serviced quickly for minimum down time
• Lock-on button – for continuous drilling or mixing
• Forward/reverse rocker switch – use for drilling or backing out jammed bits
Auxiliary handle, chuck key, and key strap
Professional 3⁄8" VSR Drill
Specifications:
Features:
• Glass filled nylon housing – for durability
Chuck Size:
3/8 in. keyless
• Lock-on button – for continuous drilling
No Load Speeds: 0 - 2,500 r/min.
• 6.5 Amp motor with hardened steel gears – ensures tool longevity
• Built-in bubble level – for accurately drilling vertically or horizontally
Cord Length: 12 ft.
• Soft grip handle – for a more comfortable and secure grip
Includes:
Heavy duty contractor bag
17
Circular Saws
The World’s
Fastest and Lightest
Framing Saw
6 ½" Compact Framing Saw
Model number: R3203
Specifications:
Features:
Arbor Size: 5/8 in.
Blade Diameter: 6-1/2 in.
• 0-50° bevel capacity
with 45° positive stop –
quick release design for fast bevel
adjustments; capable of cutting finished
2x material at 45° in a single pass
Cutting Depth:
2-1/8 @ 90°
1-5/8 @ 45°
1-1/2 @ 50°
• 18 tooth thin kerf carbide tipped blade – for smooth cross
and rip cuts as well as longer life
Tool Weight: 8 lbs.
• Composite shoe – high strength composite shoe designed
to withstand up to a 1 story drop
• Externally accessible brushes – minimizes downtime
Includes:
• Integrated F.A.S.T.™ dust blower – helps to clear cut line for
improved accuracy
Carbide tipped blade, hex wrench,
Worm Drive
Sidewinder
2007
41%
FASTER
25%
LIGHTER
Weight Competition
18
Award winning tool,
page 55
»
Speed Competition
Plywood ID
Front and Rear Kerf Indicators
The plywood ID system
offers quick depth
adjustments to common
material thicknesses
Full-length front and rear kerf indicators add
cutting precision by allowing for alignment
between the front cut line and rear kerf to control
and reduce “fishtailing”
7 ¼" Wormdrive Saw
Model number: R3210
Specifications:
Features:
Input: 15 Amps
• Spindle lock – for easy blade changing
Blade Size: 7-1/4 in.
• Left side blade – for clear view of cut line
• 51.5° bevel capacity – provides greater range of cuts
Arbor Type: diamond
• High visibility scales – for easy reading
Cutting Depth:
2-3/8 in. @ 90°
1-3/4 in. @ 45°
1-9/16 in. @ 51.5°
• 24 tooth carbide blade – for smooth cuts and longer life
Includes:
• Heavy duty worm gear construction – for higher torque and power
• Skyhook™ saw hook – hang the saw on framing material
• 15 Amp motor – more power
Blade, wrench, and dipstick
• Magnesium construction – for durability and lighter weight
• Externally accessible brushes – for convenience and minimum downtime
• Oversized levers – for easier depth and bevel settings
Award winning tool,
page 55
»
• High strength aluminum base – for durability
7 ¼" Circular Saw
Model number: R3201
Specifications:
Features:
Input: 15 Amps
• 15 Amp motor – for heavy use situations
Arbor Size: 5/8 in.
• Magnesium upper and lower blade guard – lighter weight and
less user fatigue
Blade Diameter: 7-1/4 in.
• Full length kerf indicator – for more accurate cutting
Depth-of-Cut at 90°: 2-1/4 in. @ 90°
1-3/4 in. @ 45°
1-5/8 in. @ 51.5°
• Externally replaceable brushes – for minimum downtime
Tool Weight: • Positive bevel stop at 45° and quick release button at 51.5° – for quick
and easy setup and adjustment
11 lb.
Includes:
Carbide tipped blade, and wrench
• 24 tooth thin kerf carbide tipped blade – for smooth crosscuts, rip
cuts and extended life
• Soft grip shock absorbing front handle – for durability and comfort
19
Variable Speed Orbital Jig Saw
Model number: R31211
Specifications:
Input: 6 Amps
No Load Speeds: 500 - 3,000 SPM
Stroke Length: 1 in.
Orbital Settings: 5
Includes:
1 bi-metal blade, dust collection
vacuum attachment, no-mar base
plate, chip shield and heavy duty
contractor bag
Features:
• Variable speed dial with electronic feedback – to maintain
speed under load
• Tool-free blade change – for quick easy blade changes,
accepts T-shank blades only
• 5 orbital settings – for working with different material
• Auto-stop brushes – for extended motor life
• Tool-free adjustable base – for making bevel cuts
• Dust blower – helps maintain view of cut line
• Vacuum adaptor and dust shield – provide optimal dust
pick-up efficiency
Heavy Duty Reciprocating Saw
Model number: R3001
Specifications:
Input: 11 Amps
Stroke Length: 1-1/8 in.
Tool Length: 17-3/4 in.
Includes:
3 blades, Allen wrench, and
heavy duty contractor bag
Features:
• 11 Amp motor – ensures tool longevity
• Variable speed – for cutting a wide variety of materials
• Tool-free blade change – for quick easy blade changes
• Adjustable/pivoting shoe – to maintain cutting stability
• Front and rear rubber grip areas – for improved grip
• Accessible brushes – for minimum downtime
Twist Handle Orbital Reciprocating Saw
Model number: R3020
Specifications:
Input: 12 Amps
Stroke Length: 1-1/4 in.
Includes:
3 heavy duty blades,
Features:
• Tool-free twist handle – rotates easily at the push
of a button. Features 90° stops for added versatility
• 12 Amp motor – for increased power and endurance
• Variable speed trigger – full range electronic variable speed
• Tool-free blade change – for quick, easy blade changes
• Adjustable/pivoting shoe – to maintain cutting stability
• Front and rear rubber grip areas – for improved grip
Tool-free Twist Handle
Rotates easily at the push of a button.
Features 90° stops for added versatility
20
Selectable
Orbital Cutting
For faster rough cuts
NEW
ANGLE GRINDers
4 ½" Angle Grinder
Model number: R1001
Specifications:
Features:
Input: 8 Amps
Spindle Thread Size: 5/8 in. x 11 in.
Tool Length: 11 in.
Includes:
Side handle, wheel guard, grinding
wheel, flange, clamp nut, spanner
wrench, and heavy duty contractor bag
• 8 Amp Motor – features precision cut gears and
sealed bearings for increased durability
• Two position side handle – for added versatility
• Spindle lock – for quick, easy wheel changes
• Tool-free wheel guard – for easy guard
position changes
• Paddle style switch with lock on – for operation ease
• Double varnished motor windings – helps prevent motor
contamination from dust
7" Twist Handle Angle Grinder
Model number: R1020
Specifications:
Features:
Input: 13 Amps
Spindle Thread Size: 5/8 in. – 11U
Tool Length: 11 in.
Tool Weight: 8 lbs.
• 13 Amp motor – features precision cut gears and sealed
bearings for increased durability
• Three position side handle – for added versatility
• Spindle lock– for quick, easy wheel changes
Includes:
• Tool-free wheel guard – for easy guard position changes
Side handle, wheel guard, grinding
wheel, flange, clamp nut,
and spanner wrench
• Compact gear case – for less weight and increased versatility
NEW
• Two-finger trigger switch – for comfort, ease of operation,
and reduced user fatigue
Three Position Side Handle
Allows for multi-position use maximizing
versatility and convenience
21
Routers
Heavy Duty Variable Speed Laminate Trimmer
Model number: R2400
Specifications:
Collet Size: 1/4 in.
No Load Speeds: 20,000 - 30,000 r/min.
Tool Weight: 3 lbs.
Includes:
2 collet wrenches, edge guide, 1/4 in. flush
trim bit, bearing guide, guide bars, and case
Features:
• Electronic feedback – for consistent speed and power
• Replaceable brushes – easily accessible external brush caps
• Variable speed – adjust speed to material type and application
• 6 Amp Permanent Magnet Motor™ – for extra power
in a compact size
• Depth scale – easy to read for quick set-up
• Thumb wheel depth adjustment – for easy depth setting
• 1/4 in. collet – accepts most 1/4 in. bits
• Die-cast base – for greater durability and longevity
• Soft Start – provides a gradual acceleration of the motor
Heavy Duty EVS 2 ¼ Peak HP Router Combo
Specifications:
Input:
120 V AC, 12 Amps
Peak Horse Power: 2-1/4 HP
No Load Speeds: 10,000-23,000 r/min
Motor Weight: 6.4 lbs.
Includes:
R2900 motor, R2910 fixed base,
R2920 plunge base, 2 wrenches, centering
tool and pin, T-handle wrench, 1/4 in.
and 1/2 in. collet assemblies, 2 vacuum
attachments, and heavy duty contractor bag
22
Features:
• 2-1/4 peak horsepower motor – provides the power
necessary for dense materials
• Electronic variable speed with feedback – helps
maintain speed under load
• Accessible brushes – can be serviced quickly for
minimum downtime
• Precision milled magnesium construction – for high
strength and exact fit
• Soft Start – provides a gradual acceleration
of the motor
• Multi-position depth stop – makes repetitive cuts easy
• High visibility scales – for setting an accurate
depth of cut
• Premium shaft design with spindle lock – for minimal
runout and easy bit changes
Through Table Capability
LEDs and Cutaway Base
Micro depth adjustment with through
table capability enables added
precision and convenience
LEDs combined with cutaway base design
provide an unparalleled view of the bit to
ensure accurate material removal
Heavy Duty Variable Speed 3" X 21" Belt Sander
Model number: R2720
Specifications:
Input: 10 Amps
Belt Size: 3 in. x 21 in.
No Load Belt
Speeds (SFPM): 800-1500 r/min.
Includes:
Dust bag, 80 grit sanding belt,
and hex key
Best Value
Award winning tool,
page 55
Features:
• 10 Amp in-line design motor – belt and gear driven for added
power and durability
• Variable speed dial – match the speed to the desired removal
rate to fit the application
• 3 position pommel handle – can be positioned in three different
locations for optimal user comfort
• Tool-free belt release – makes changing belts quick and easy
• Flush sanding capable – flat face allows for flush sanding
against vertical surfaces
• Die-cast construction – for high strength and durability
• Accessible brushes – can be serviced quickly
for minimum downtime
• Soft Start – gradually accelerates motor for controlled start ups
• Belt tracking – finger adjust tracking for perfect alignment
»
Model number: R2740
Specifications:
Input: 6.5 Amps
No Load Belt
Speeds (SFPM): 400-950 r/min.
Includes:
Features:
• Variable speed dial with electronic feedback –
match the speed to the desired removal rate
• Tool-free belt release – makes changing belts
quick and easy
•Automatic belt tracking – tool automatically adjusts
belt to center of platen for alignment
• Flush sanding capable – flat face allows for flush
sanding against vertical surfaces
Dust bag and 80 grit sanding belt
NEW
Twin Fan High Efficiency
Dust Collection
While one fan cools the motor, the other collects
dust resulting in maximum dust pickup efficiency
23
Sanders
6 in. Random Orbit Sander
Model number: R2611
Specifications:
Input: 4 Amps
No Load Speeds: 4,000 - 10,000 r/min
Orbit Diameter: 1/4 in. and 1/8 in.
Features:
• Dual random orbit settings – for fine finish
and aggressive material removal
• Electronic speed control – 4,000–10,000 r/min.
• Soft Start and integrated pad brake control –
for a gouge-free workpiece
• Micro Fiber™ hook and loop pad – fits snug
for improved sanding efficiency
• On-board vacuum adaptor – for 1-1/4 in. and 2-1/4 in. vacuum hose
• 2 Position / removable front pommel handle – for superior ergonomics and flush sanding capability
Includes:
3 sheets of 80 grit hook and loop paper,
1 cloth dust bag, hex key, front handle
assembly and wrench
Award winning tool,
page 55
»
Micro Fiber™ Hook and Loop Pad
RIDGID® random orbit sanders work with Micro Fiber™ "hook and loop" sanding disks
that come off as easy as they go on and fit snug for improved sanding efficiency
24
* Replacement Micro Fiber™ hook and loop pads can be ordered from 1-866-539-1710 or www.RIDGID.com
Specifications:
Features:
Input: • Electronic speed control – 7,000–12,000 OPM (no load speeds)
3 Amps
No Load Speeds: 7,000 - 12,000 OPM
• Through body sealed slide switch – for reliability and ease of use
Orbit Diameter: 3/32 in.
• Soft Start and integrated pad brake control – for a gouge-free workpiece
Pad Size: 5 in., 8-hole pattern
• Permanent Magnet Motor™ – maintains constant speed
and power under load
Includes:
2 sheets of 80 grit paper, dust bag,
hook & loop pad, and heavy duty
contractor bag
• Micro Fiber™ hook and loop pad – paper fits snug for
improved sanding efficiency
• On-board vacuum adaptor – for 1-1/4 in. and 2-1/4 in. vacuum hose
Best Buy, Best Value
Award winning tool, page 55
»
¼ Sheet Sander
Specifications:
Features:
Input: 2.4 Amps
• Through body sealed slide switch – for reliability and ease of use
No Load Speed: 14,000 OPM
• On-board vacuum adaptor – fits standard vacuum hoses
Orbit Diameter: 1/16 in.
• Oversized quick release tabs – for securing standard paper
• Permanent Magnet Motor™ – maintains constant speed and power
during loaded conditions
Includes:
3 sheets of paper (120, 180, 220 grit),
paper punch, dust bag, and heavy duty
contractor bag
• Active through pad dust collection – for a cleaner
work environment
On-Board
Vacuum Adaptor
Works with 1-1/4 in. and 2-1/4 in. vacuum
hose for a cleaner work environment
25
26
Covered For Life
Page 56
»
Miter saws
12" Dual Compound Miter Saw
Model number: R4121
Specifications:
Input: 120 V AC 15 Amps
Blade Arbor: 1 in.
Blade Diameter: 12 in.
Cutting Capacities:
• Baseboard Against Fence:
• Baseboard Lying Flat: • Crown Molding Lying Flat: • Nested Crown: • 90° Cross Cut (nominal): • 45° Miter Cut (nominal): • 45° Bevel Cut (nominal): 6 in.
9-1/4 in.
7-3/4 in.
7-1/2 in.
2 in. x 10 in.
2 in. x 6 in.
2 in. x 10 in.
Tool Weight: 46 lbs.
Features:
• 15 Amp motor – heavy duty motor powers through the most difficult
cuts
• Exactline™ adjustable laser alignment system – user-adjustable laser
assists operator to accurately align blade with the cut line
• Dual bevel and extended miter range – 0° to 48° dual bevel and 0° to 50°
miter capacities accommodate a wide variety of cuts with crown molding
detent stops
• Miter detent release and by-pass thumb wheel – for quick engagement
and release of miter detent stops
• Forward quick release bevel lock – provides convenient location for fast
bevel adjustments
• Dual sliding fences – adjustable fences on both sides of the blade to
support wider material
• 2-1/2 in. dust port – provides connection to standard dust collection
systems and wet/dry vacs to help keep work area clean
Includes:
Exactline™ adjustable laser guide, carbide tipped blade, dust bag,
dust guide, work clamp, blade wrench, and hex keys
• Work clamp – securely holds material in place
• Repeat-A-Cut™ fence – allows user to mark fence for repetitive cuts
aDJUstaBLe Laser
NEW
27
Miter saw lasers
RIDGID’s Exactline adjustable laser alignment system makes exact
miter cutting easy, time after time, even after blade changes. The laser is
mounted on the arbor and is user-adjustable making it easier than ever to
align the laser line with the left edge of the blade to show precisely where
the left edge of the blade will cut. This makes your job simple: measure with
care, line up your cutline with Exactline – and enjoy the pride of perfect joints.
12" Sliding Compound Miter Saw with Adjustable Laser
Model number: MS1290LZA
Specifications:
Features:
Input: 120 V AC 15 Amps
Blade Arbor: 1 in.
Cutting Capacities:
• Baseboard Against Fence: 5-1/2 in.
• Max. Cross Cut: 13-1/2 in.
• 90° Cross Cut (nominal): 2 in. x 12 in.
4 in. x 4 in.
• 45° Miter Cut (nominal): 2 in. x 10 in.
• 45° Bevel Cut (nominal): 2 in. x 12 in.
Includes:
Exactline™ adjustable laser
disc, work clamp, carbide tipped
blade, dust bag, dust guide and
blade wrench
• 15 Amp motor – heavy duty motor powers
through the most difficult cuts
• Exactline™ adjustable laser alignment system –
user-adjustable laser assists operator to
accurately align blade with the cut line
• Dual bevel and extended miter range –
0° to 47° dual bevel and 0° to 61° miter capacities
accommodate a wide variety of cuts with crown
molding detent stops
• Miter detent release and by-pass thumb wheel –
for quick engagement and release
of miter detent stops
• Forward quick release bevel lock – provides
convenient location for fast bevel adjustments
• 2-1/2 in. dust port – provides connection
to standard dust collection systems and
wet/dry vacs to help keep work area clean
• Work clamp – securely holds material in place
• Repeat-A-Cut™ fence – allows user to mark fence
for repetitive cuts
aDJUstaBLe Laser
28
• Blade Depth Adjustment – tool-free adjustment
gives the ability to make dado and rabbet cuts
12" Compound Miter Saw with Adjustable Laser
Specifications:
Features:
• 15 Amp motor – heavy duty motor powers through the most
difficult cuts
Input: 120 V AC
15 Amps
No Load Speed: 4,000 r/min. • Exactline™ adjustable laser alignment system –
user-adjustable laser assists operator to accurately
1 in.
align blade with the cut line
12 in.
• Extended bevel and miter ranges – 3° to 48° bevel and 0° to 47°
miter capacities accommodate a wide variety of cuts
Blade Arbor: Blade Diameter: Cutting Capacities:
• Baseboard
• Against Fence: 4-3/4 in.
• Crown Molding Laying Flat: 6-1/2 in.
• Baseboard Laying Flat: 7-7/8 in.
4 in. x 4 in.
• Sliding left fence – provides support for wider material
and adjusts for bevel cuts
• Left side table extension – for increased material support
• Front mounted clamp – securely holds material in place
• 2-1/2 in. Dust port – provides connection to standard dust
collection systems and wet/dry vacs to help keep work
area clean
Includes:
Exactline™ adjustable laser disc, table
extension, carbide tipped blade, work
clamp, dust bag, dust guide, miter
lock handle and blade wrench
• Repeat-A-Cut™ fence – allows user to mark fence for
repetitive cuts
aDJUstaBLe Laser
10" Compound Miter Saw with Adjustable Laser
Specifications:
Features:
Input: 120 V AC
15 Amps
No Load Speed: Blade Arbor: 5,500 r/min. • Exactline™ adjustable laser alignment system – user-adjustable
laser assists operator to accurately align blade with the cut line
5/8 in.
Cutting Capacities:
• Baseboard Against Fence: 3-1/2 in.
• Crown Molding Laying Flat:4-3/4 in.
• Baseboard Laying Flat: 6 in.
4 in. x 4 in.
• 15 Amp motor – heavy duty motor powers through the most
difficult cuts
• Extended bevel and miter ranges – 0° to 48° bevel and 0° to 50°
miter capacities accommodate a wide variety of cuts with crown
molding detent stops
• Sliding left fence – provides support for wider material and
adjusts for bevel cuts
• Left side table extension – for increased material support
Includes:
• Front mounted clamp – securely holds material in place
Exactline™ adjustable laser disc, table
extension, carbide tipped blade, dust
bag, dust guide, work clamp, miter
lock handle and blade wrench
• 2-1/2 in. Dust port – provides connection to standard dust
collection systems and wet/dry vacs to help keep work
area clean
• Repeat-A-Cut™ fence – allows user to mark fence for
repetitive cuts
aDJUstaBLe Laser
29
Utility Vehicles
Until now, you’ve had two tough choices when it comes to moving heavy, bulky tools like table saws and miter saws on the
jobsite. One: brace your back, clench your teeth, lift and hope you don’t strain something. Two: look for “lightweight” benchtop
tools and hope they have enough power, durability, and precision to handle your work – which may not be the case. But
now, RIDGID® brings you the real answer to big-tool jobsite mobility and performance. RIDGID® Utility Vehicles. Thanks to their
ergonomic handles and large, never-flat, easy-rolling wheels, RIDGID® Utility Vehicles help you move true benchtop tools to
wherever you need them. In use, their rugged steel frames provide the stability for on-site work. When you’re done, they fold
and store to save space. RIDGID® Utility Vehicles: another advance from the pro solutions leader.
Heavy Duty 10" Portable Table Saw with Stand
Model number: TS2410LS
Specifications:
Input: 15 Amps, 120 V
Features:
• Powerful 15 Amp motor – heavy duty power
• Soft Start – provides smooth starting, prolongs motor life, and
reduces breaker tripping
Depth-of-Cut At 45°: 2-1/4 in.
Depth-of-Cut At 90°: 3-1/8 in.
Rip Capacity: 25 in. right of blade
12 in. left of blade
Includes:
Portable Table Saw, carbide tipped blade,
blade guard assembly, rip fence, miter
gauge, blade wrenches
• Tool-free blade guard*
• Retract-A-Rip™ fence and rail – maintains rip dimension accuracy to
the blade, provides 25 in. rip capacity while maintaining portability
• Micro adjust fence – for fine adjustments
• “T” slot miter gauge and slots – provide additional accuracy
for crosscutting
• Single handle bevel/height adjustment – for quick, easy
blade adjustments
• Micro adjust bevel adjustment with quick release – saves time and
increases accuracy
• On-board storage – keeps rip fence, miter gauge, extra blades and
power cord within easy reach
* Remove guard only for non-through cuts. Always disconnect power before
replacing blades or servicing the table saw. For complete safety operating
instructions, see operator's manual.
Portable Table Saw
30
The RIDGID® Utility Vehicle for Table Saws
folds easily for transport and unfolds
to a convenient, sturdy saw platform
Miter Saw Utility Vehicle
Model number: AC9944
Specifications:
Work Support: 9.6 ft.
Max Weight Rating: 200 lbs.
Features:
• Universal quick release saw mounting brackets – allows user to easily
mount and remove most miter saws from the stand
• Large wheels – provides superior mobility over most terrains
• Laterally adjustable saw mounting – saw can be positioned from one
side of stand to another, providing optimal length of cut
• 9 ft. 6 in. overall extension length – provides ample length for longer
lengths of stock
• Easy load glide feet – assists in loading and unloading into truck bed
minimizing marring the bed surface
• Space saving support legs – housed in the extension arms, these
support legs feature a quick set height adjustment
• Heavy-duty steel construction – provides plenty of strength and
support for the most demanding use
• Multi-grip position transportation handle – change handgrip positions
easily for optimum comfort and balance while transporting
• Large dedicated work surface – great for placing tape measure, pencil,
square and coping saw, and can also be used as writing surface
• Lift handle – assists user in set-up and fold down of unit
• Work support with 12 in. rollers – relocate one or both of the work
supports to provide additional support for longer and heavier stock.
12 in. steel rollers are also provided for maximum work piece support
• Leg supports – for vertical storage and assisting in set-up
Includes:
Mounting hardware, wheels,
and roller assembly
Miter saw sold separately
Unparalleled Portability and Support
Set up the MS-UV for a 9-foot 6-in. material support or fold it
down for transport and storage in 3 easy steps
31
Bench and stationary
10" Cast Iron Table Saw
Model number: TS3660
Specifications:
Input: 1-1/2 HP TEFC
induction,
13 / 6.5 Amps
120 V / 240 V
Depth-of-Cut At 45˚: 2-1/4 in.
Depth-of-Cut At 90˚: 3-3/8 in.
Features:
• Powerful 1-1/2 HP TEFC (Totally Enclosed Fan
Cooled) induction motor™ – keeps dust and
debris out of motor for extended life
• Rugged and precise rip fence design with
micro-adjust – 36 in. rip capacity for ripping
wider material
• Cast iron table extensions with clamping
surface – allow jigs and featherboards to be
clamped in place easily
Rip Capacity: 36 in. right of blade
12 in. left of blade
• Up front controls – for easier access
• 40 Tooth carbide blade – for fast ripping and
smooth crosscuts
• Tool-free blade guard*
• Ind-I-Cut™ alignment disc – writable surface to
accurately align cut line with blade
* Remove guard only for non-through cuts. Always
disconnect power before replacing blades or
servicing the table saw. For complete safety
operating instructions, see operator's manual.
Includes:
Herc-U-Lift™ mobile base, miter gauge, carbide
tipped blade, blade guard assembly, rip fence,
blade wrench and rail set
Herc-U-Lift™
The Herc-U-Lift™ mobile base
provides easy transportation
with a single push of its pedal
32
MagSwitch® Featherboard
Switchable magnets turn on and off with a simple
half turn, locking featherboard precisely where
you want it, to keep wood against the fence
MagSwitch® Featherboard sold separately, model number AC1001
14" Band Saw
Model number: BS1400
Specifications:
Features:
Input: 3/4 HP TEFC induction,
10/5 Amps, 120 / 240 V
• 3/4 HP TEFC induction motor – quiet, smooth running belt drive delivers power
to resaw up to 6 in. thick oak
No Load Speed: 2,700 FPM
Blade Widths: 1/8 in. – 3/4 in.
• Heavy duty construction – cast iron table and frame minimize vibration, precision balanced
cast aluminum upper and lower wheels, steel wheel covers and heavy gauge leg set
Blade Length: 93-1/2 in.
Table: 14 in. x 14 in. cast iron
Table Tilt: -10° – 45° right
Frame: cast iron
Throat Width: 13-5/8 in.
Depth-of-Cut: 6 in.
Includes:
3/8 in. blade and leg set
• Unique features – micro adjust on upper and lower blade guides for precise tracking,
wheel cleaning brushes prevent dust build-up on wheels, built-in dust collection port,
on-board additional blade storage
• User-friendly controls – high visibility indicators and comfortable Sof-Touch™ on
knobs help make adjustments easier. Large paddle switch with safety lock-out
15" Drill Press
Model number: DP1550
Specifications:
Features:
Input: 1/2 HP TEFC
induction, 120 V
• 1/2 HP TEFC induction motor – heavy duty power to bore through the toughest materials
Number of Speeds: 12
No Load Speeds: 300 – 3,100 r/min.
• Left/right hub – allows positioning of the crank handles on the left or right side of the head
Chuck Size: 5/8 in.
• Easy-to-use woodworking table – large clamping edges and four mounting slots make this table
extremely versatile
Spindle Travel: 3-3/4 in.
• Poly-V belt drive – limits vibration and improves power transfer
Overall Height: 65-1/2 in.
• 3-3/4 in. Quill travel – bore completely through a dimensional 4x4 in one pass
• Feature-packed – smooth actuating rack and pinion table elevation, tilting table, quick release belt tension
lever, built-in work light and chuck key storage
• Heavy duty construction – extra wide cast iron base, table, head and heavy gauge tubular steel column
• User-friendly handles and controls – Sof-Touch™ handles and knobs, high visibility bevel and depth scales
and indicators
• Large capacity – throat depth allows drilling to the center of a 15 in. workpiece. 5/8 in. chuck accepts 1/32 in.
to 5/8 in. drills and Forstner bits, 12 speed settings to optimize rate for material, hole diameter and depth
Includes:
Chuck key, hex keys, and wrench
33
13" Thickness Planer with 3-Blade Cutterhead
Model number: R4330
Specifications:
Features:
• 15 Amp / 120 V motor with overload protection
Cutter Head Speed: 10,000 r/min. (no load)
Cuts Per Minute: 30,000 (no load)
• Depth adjustment handwheel – easy-to-reach side-mounted
handwheel keeps top of planer free to stage material
Feed Rate: 26 FPM (no load)
Capacity: 13 in. x 6 in.
Maximum Depth-of-Cut: 1/8 in.
• Three-blade cutterhead – leaves a smooth, blemish free
surface to make final finishing easier
• Dual-edge, quick change blades
• Ind-I-Cut™ depth measurement – instantly measures
cutting depth before each pass
• Repeat-A-Cut™ depth stops – eight adjustable depth stops to
precisely plane workpieces to desired thickness up to 1-3/4 in. thick
Includes:
Hex key, magnetic blade tool, blade/tool storage,
• 2-1/2 in. and 4 in. dust ports – to work with common dust collection systems
depth adjustment handwheel and knob, dust
hood, and 2 dust hood knobs
• On-board tool and blade storage – keeps blades and blade changing tools conveniently
stored for quick and easy access
NEW
• Large infeed/outfeed tables extensions – provides extra workpiece support to help eliminate snipe
Award winning tool,
page 55
»
6 1⁄8" Jointer/Planer
Model number: JP0610
Specifications:
Features:
Input: 1 HP TEFC induction,
12/6 Amps,
120 V / 240 V
Cuts per Minute: 15,000
Knives: three HSS
Knife Adjustment: jack screws
Bed Length: 45 in.
Max. Planing Width: 6-1/8 in.
Max. Depth-of-Cut/Pass: 1/8 in.
Rabbet Capacity: 1/2 in.
• 1 HP heavy-duty motor – heavy duty induction
motor operates on 120 V or 240 V, totally enclosed to
prevent sawdust contamination, fan cooled for longer life, belt
drive delivers smooth consistent power
• Heavy duty, easy-to-assemble construction – rugged cast iron
bed minimizes vibration, machine ground surfaces for precise
jointing/planing, sturdy heavy gauge wide stance cabinet
with built-in sawdust collection port and on-board
tool storage
• Dual bevel fence – with stops at 45°, 90° and 135°
• Convenient dust port – quickly slides out of the way when
not in use, provides on-board storage for blade
alignment tools
• Versatile bed/table – long 45 in. bed gives greater support
to large workpieces, rabbeting ledge for precise rabbets up
to 1/2 in. deep, adjustable front and rear tables
Includes:
Cabinet, 2 push blocks, angle gauge, dust chute, fence assembly, cutter guard and adjustment wrenches
34
14" Abrasive Cut-off Machine
Model number: CM1450
Specifications:
Features:
• 15 Amp high torque motor – the largest motor allowed by standard 15 A / 120 V circuits,
powers through rebar, bar stock or a complete bundle of steel studs
Wheel Diameter: 14 in.
Arbor Diameter: 1 in.
Pivoting Fence:
45° L – 45° R
Cutting Capacities:
• Steel Studs: • Pipe OD: • Bar Stock: full bundle
5 in.
2 in.
• Heavy duty construction – long life, hardened cut steel gears, durable cast aluminum
motor housing, wide, cast iron base with non-slip rubber feet for stability
• 45° left – 45° right pivoting fence – for accurate miter cuts
• Tool-free fence adjustment – allows quick and easy adjustment of the fence for
all miter angles
• Quick release vise – makes clamping and adjusting stock convenient
• Ergonomic “D” handle – verified by user research, provides better grip
• Jobsite features – carrying handle, hold down chain stabilizes head in transport,
arbor lock, on-board wrench storage
Includes:
14 in. abrasive wheel and arbor wrench
Oscillating Edge Belt/Spindle Sander
Model number: EB4424
Specifications:
Features:
Input: • Two machines in one – combines edge belt and spindle sanding in
one high performance tool
3/8 HP induction,
5 Amps
Transmission (No Load Speed): • r/min.:
1,725 spindle
• FPM:
1,350 belt
• Ball bearing construction – for smooth operation and long life
Oscillation: 60/min.
Stroke: 3/4 in.
• Tool-free conversion from belt to spindle – changes are quick and
easy, no tools required
Sanding Drums (Provided): 3/4 in., 1 in.,
1-1/2 in., 2 in.
• Oscillating and rotary motion – for fast, burn-free finishes on edges,
faces, contours, inside and outside curves
• Table tilts 0-48° – with detents at most popular angles
(0°, 15°, 22.5°, 30°, 45°) to sand bevel edges
• Completely outfitted – includes 4 in. x 24 in. belt, all drums
and a set of sleeves
• On-board accessory storage – all drums, throat plates, washers and
belt mechanism store neatly on the tool
• User-friendly features – Sof-Touch™ knobs, hose adapter with built-in
sawdust collection port, recesses in base for sawhorse mounting
Award winning tool,
page 55
»
Includes:
Sander bed
assembly with 4 in. x 24 in.
sanding belt assembly, 1/2 in.,
3/4 in., 1 in., 1-1/2 in. and 2 in.
diameter sanding sleeves with
4 corresponding drums,
drum washers, hex key,
table insert, and throat plates
Two Machines In One
The RIDGID® Oscillating Edge Belt/Spindle
Sander combines edge belt and spindle
sanding in one high performance tool
35
Tool-free adjustable
exhaust with muffler –
allows you to direct the
exhaust where you want it
Magnesium housing –
for lighter weight
Tool hanger – for
convenient carrying
while not in use
Self-cleaning air filter –
keeps debris out of tool
and extends tool life
Internal piston
catch – for consistent
driving power
Swivel quick connect –
for less hose tangle
Rubber over-molded handle
and trigger – for increased
comfort and grip
Selectable trigger allows contact
fire or sequential fire mode – for
high productivity and precise
placement of fasteners
FastenEDGE™ Technology
Tool-free
depth-of-drive
adjustment –
accurate depth
control protects
work surface
from overdriving
Pneumatics
FastenEDGE™ Technology combines all the industry’s best and most sought-after professional features
into a full line of RIDGID pneumatic products. Functional features such as Selectable Triggers that allow
you to select contact fire or sequential fire modes. Convenience features that include Tool-free Adjustments, SelfCleaning Air Filters, Tool Hangers and Swivel Quick Connects. Durability and performance features from Magnesium
Housing to an Internal Piston Catch. But durability doesn’t stop with FastenEDGE™ because all RIDGID® Pneumatic
hand tools can be registered Free for the Lifetime Service Agreement. This unprecedented protection covers all
defects in workmanship or materials and even normal wear items such as O-rings, piston stops and driver blades,
for the lifetime of the original, registered tool owner. The results are durable, powerful and versatile pneumatic tools that
exceed the highest professional expectations.
3 ½" Round Head Framing Nailer
Model number: R350RHA
Specifications:
Features:
Fastener Type: • Powerful motor – able to drive 3-1/2 in. long,
.162 in. diameter nails (16D Common)
full round head
Fastener Diameters: .113 in. – .162 in.
Fastener Range: 2 in. – 3-1/2 in.
Magazine Capacity: 60 – 70 nails
• Rear loading magazine with by-pass pusher –
for quick 2-step reloading
• Magazine adjustment – for larger diameter nails
Includes:
• Dry-fire lockout feature – extends motor life and
prevents missing nails
Carrying bag with shoulder strap, oil,
wrench and eye protection
• Aggressive “toe-nailing” claw – reduces slipping
during angled nailing
• No-mar pad – keeps work surface clean of
tool marks
Uses 21-22˚ full round head framing nails manufactured by:
Bostitch®, Grip-Rite®, Porter-Cable®, SENCO®.
37
3 ½" Clipped Head Framing Nailer
Model number: R350CHA
Specifications:
Features:
Fastener Type: • Powerful motor – drives 3-1/2 in. framing nails
clipped head
Fastener Diameters: .113 in. – .131 in.
• Rear loading magazine with by-pass pusher – for quick 2-step reloading
Fastener Range: • Dry-fire lockout feature – extends motor life and prevents missing nails
2 in. – 3-1/2 in.
Magazine Capacity: 88 – 98 nails
• Aggressive “toe-nailing” claw – reduces slipping during angled nailing
Tool Weight: • No-mar pad – keeps work surface clean of tool marks
8.3 lbs.
Includes:
Carrying bag with shoulder strap, oil,
wrench and eye protection
Uses 30-34˚ clipped head framing nails manufactured by:
Grip-Rite®, Hitachi®, Paslode®, Porter-Cable®, SENCO®.
3 ½" Coil Framing Nailer
Model number: R350FCA
Specifications:
Fastener Type: 15° wire-collated
full round head coil
Fastener Diameter: .099 in. – .131 in.
Fastener Range: 1-1/2 in. – 3-1/2 in.
Magazine capacity: 300 max
Features:
• Powerful motor – power to drive 3-1/2 in. nails
• Semi-transparent magazine cover – allows for convenient view of nail supply
• Light weight tool – 7.9 lbs. for reduced user fatigue
• Adjustable rafter hook – allows for easy on-site storage
• Aggressive “toe-nailing” claw – reduces slipping during angled nailing
Includes:
• No-mar pad – keeps work surface clear of tool marks
Carrying bag with shoulder strap,
oil, wrench and eye protection
Palm Nailer
Model number: R350PNA
Specifications:
Features:
Fastener Type: •Powerful motor – power to drive 3-1/2 in. nails into the hardest LVL lumbers
bulk full round head
Fastener Diameter: .113 in. – .162 in.
(3D to 16D)
Fastener Range: 1-1/2 in. – 3-1/2 in.
Includes:
Oil and wrench
•Magnetic nail guide – holds nail securely in place
•Dialable depth-of-drive – allows easy countersink to above flush nail setting
•Right-weighted tool – weight optimized at 2.85 lbs. so that the tool is not too heavy and
yet provides enough mass for driving the nails smoothly
•Ultra comfortable adjustable hand strap – provides a snug comfortable fit, has positions
for both right and left hand operation and is made with contractor grade materials
•Over molded hand grip – for optimal ergonomic hand fit
•Excellent for driving nails into metal connectors,
joist hangers etc.
38
NEW
1 ¾" Roofing Coil Nailer
Model number: R175RND
Specifications:
Fastener Type: roofing coil nails
Fastener Diameter: .120 in.
Fastener Range: 3/4 in. – 1-3/4 in.
Collation: 15° wire collated
Magazine Capacity: 120 nails
Includes:
Case, oil, eye protection and wrench
Features:
• Semi-transparent magazine cover – for easy site of nail supply
• Straight Drive™ feature – to enhance drive quality and roof quality
• Replaceable nosepiece with carbide inserts – for easy maintenance and to extend tool life
• EZ Load™ feature with offset magazine – for quick re-loading
• Magnetic Nail Holder – allows for easy loading and maintains nail position
down to the last fastener
• Removable tool-free shingle guide adjustment –
precise placement of shingles
Uses 15˚ roofing coil nails manufactured by:
Bostitch®, Grip-Rite®, Hitachi®, Paslode®, Porter-Cable®, SENCO®.
2 ½" Angled Finish Nailer (15 Gauge)
Model number: R250AFA
Specifications:
Features:
Fastener Type: • Powerful motor – drives a 2-1/2 in. finish nail into solid oak
DA angled finish
Fastener Diameter: 15 gauge
• Angled magazine – allows access in tight spots
Fastener Range: 1 in. – 2-1/2 in.
Collation: 34o tape
• Tool-free jam release – for easy clearing to keep you going
Tool Weight: • 2 No-mar pads – to keep work surface clean of tool marks
3.9 lbs.
Includes:
Case, oil, 1,000 nails, eye protection,
2 wrenches and 2 no-mar pads
Uses 15 gauge DA angled finish nails manufactured by:
Grip-Rite®, Hitachi®, Porter-Cable®, SENCO®.
2 ½" Straight Finish Nailer (16 Gauge)
Model number: R250SFA
Specifications:
Features:
Fastener Type: • Powerful motor – drives a 2-1/2 in. finish nail into solid oak
straight finish nails
Fastener Range: • Tool-free jam release – for easy clearing to keep you going
3/4 in. – 2-1/2 in.
3.5 lbs.
Includes:
Case, oil, 1,000 nails, eye protection,
3 wrenches and 2 no-mar pads
Uses 16 gauge straight finish nails manufactured by:
Bostitch®, Grip-Rite®, Hitachi®, Porter-Cable®, SENCO®.
39
2 1⁄8" Brad Nailer (18 Gauge)
Model number: R213BNA
Specifications:
Features:
Fastener Type: • Powerful oil-less motor – eliminates daily oiling and oil splattering on work surfaces
brad nails
• Tool-free jam release – for easy jam clearing
Fastener Range: • Dry-fire lockout feature – extends motor life and prevents missing nails
5/8 in. – 2-1/8 in.
Magazine Capacity: 105 brads
• Tool-free adjustable exhaust with muffler – direct the exhaust where you want it
2.4 lbs.
Uses 18 gauge brad nails manufactured by:
Bostitch®, Grip-Rite®, Hitachi®, Paslode®,
Porter-Cable®, SENCO®.
Includes:
Case, 1,000 brads, eye protection, 2 wrenches and
2 no-mar pads (1 shown in storage position)
1 ½" Narrow Crown Finish Stapler (18 Gauge)
Model number: R150FSA
Specifications:
Features:
Fastener Type: • Powerful oil-less motor – eliminates daily oiling and oil splattering on work surfaces
narrow crown finish staples
Staple Crown: 1/4 in.
Fastener Range: 3/8 in. – 1-1/2 in.
Magazine Capacity: 110 staples
Uses 18 gauge, 1/4 in. crown staples
manufactured by: Grip-Rite®, Hitachi®,
• Dry-fire lockout feature – extends motor life and prevents missing nails
• Tool-free adjustable exhaust with muffler – direct the exhaust where you want it
• 2 No-mar pads – to keep work surface clean of
tool marks
Includes:
Case, 1,000 staples, eye protection, 2 wrenches and
2 no-mar pads
1 3⁄8" Headless Pinner (23 Gauge)
Model number: R138HPA
Specifications:
Features:
Fastener Type: • Depth-of-drive adjustment – depth control protects work surface from overdriving
pins
• Dual actuation trigger system – prevents accidental actuation
Fastener Range: • On board storage – for extra no-mar pad and hex wrench
5/8 in. – 1-3/8 in.
Magazine Capacity: 130 pins
• Reversible belt hooks – for convenient storage while not in use
Tool Weight: Includes:
2.1 lbs.
Uses 23 gauge pins manufactured by:
Bostitch®, Grip-Rite®, Hitachi®, Paslode®,
1,000 fasteners, eye protection, oil, and wrench
Available only in certain markets. Can be special ordered through your RIDGID® retailer.
40
NEW
AIR COMPRESSORS
5 Gallon Mini Wheelbarrow Air Compressor
Model number: OL50145MW
Specifications:
Features:
Air Delivery: 4.4 SCFM @ 90 PSI
(ISO 1217 standard)
Max PSI:
145
Tank Capacity: 5 gallons (total)
• Powerful induction motor –
maximum power and durability
with superior low volt start
characteristics
Pump Type: oil lube direct drive
Motor Type: induction,
1.2 running HP
Pump Construction: cast iron cylinder,
aluminum crankcase
Gauges:
• Extra tank capacity – 5 gallon tank
system reduces cycle frequency
and delivers more consistent airflow
• Ball valve tank drain valve – allows for easy
quarter turn opening
• Full roll cage – heavy-duty tubing protects critical components on the jobsite and in the truck
2 easy-to-read 2 in. • Superior pressure – delivers up to 145 PSI and consistently powers fasteners through even the
diameter with
hardest engineered wood (LVL, microlams & other engineered lumber)
metal housing
• Control panel – integrated design provides ultimate protection and convenient access to air regulation
fully adjustable
• Quick couplers – 2 universal push style accept both 1/4 in. industrial and automotive plugs
locking style
with easy single hand connection
Regulator:
Includes:
Oil lubricant
• Oil lubricated pump – for longest life in the toughest jobsite conditions
• Retractable portability handles – stay out of the way during storage or operation but lock in the
extended position for transport
NEW
Single 10" Never Flat Wheel
Easy maneuverability in tough jobsite conditions
41
Aluminum 5 Gallon Twin Stack Compressor
Model number: OL50135A
Specifications:
Features:
(ISO 1217 standard)
Tank Capacity: 5 gallons
• The first aluminum jobsite air compressor –
lightweight aluminum 5 gallon tanks are 30%
lighter than steel alternatives
Pump Type: oil lube direct drive
Motor Type: induction,
1.3 running HP
Pump Construction: cast iron cylinder
Includes:
Oil (already in crankcase)
• Extra tank capacity – 5 gallon tanks provide 20%
more air storage over comparable models
• Anti corrosion tanks – will not rust for cleaner and
safer operation
• Oil lubricated pump – delivers long lasting,
reliable performance.
• Full roll cage – for complete component
protection on the jobsite or in the truck
Oil Free Twinstack Air Compressor
Model number: OF45150
Specifications:
Features:
Air Delivery: 4.9 SCFM @ 90PSI
(ISO 1217 standard)
Tank Capacity: 4.5 gallon
• Best-in-class compressor pump – maintenance free
pump delivers reliable performance regardless of
jobsite temperature or terrain
Pump Type: oil free direct drive
Motor Type: induction
1.8 running HP
• Twin-Tank – 4.5 gallon tank system adds 13% more air
storage, operates more tools simultaneously and runs
tools longer before cycling
• Superior pressure – delivers up to 150 PSI and
consistently powers fasteners through even the
hardest engineered wood
• Control panel – integrated design provides ultimate
protection and convenient access to air regulation
42
Gas Powered Wheelbarrow Air Compressor
Model number: GP90135
Specifications:
Features:
(ISO 1217 standard)
Tank Capacity: 9 gallon
• Best-in-class compressor pump – solid cast iron cylinders and
crankcase provide ultimate durability while aluminum head
facilitates maximum heat dissipation
Pump Type: oil lubricated belt drive
Engine: Honda® GX 160 OHV
Pump Construction: solid cast iron cylinders
and crankcase
• Extra tank capacity – industry leading 9-gallon wheelbarrow
provides 13% more air storage, reduces cycle frequency and
delivers more consistent airflow
• Superior air delivery – operate more tools simultaneously
and maximize tool performance
• Control panel – unique, integrated design provides ultimate
protection and convenient access to air regulation
Aluminum Finish and Trim Contractor Air Compressor
Model number: OF25135
Specifications:
Features:
Air Delivery:
• Lightweight Aluminum 2.5 gallon tanks are 30% lighter than
steel alternatives
1.9 SCFM @ 90 PSI
(ISO 1217 standard)
Tank Capacity:
2.5 gallon
Pump Type:
Motor Type:
oil free direct drive
induction,
1.0 running HP
• Quiet running induction motor – long life and low noise levels
for indoor operation
• Anti corrosion tanks – will not rust for cleaner and
safer operation
• Oil Free Pump – low maintenance and no oil stains on trim.
• Full roll cage – for complete component protection on the jobsite
or in the truck
¼" Flexpress Air Hose
Model number: AC4020
Specifications:
Features:
Diameter: 1/4 in.
Length: 50 ft.
• Flexpress air hose and fittings – allow you to simply cut a damaged
hose and push in a new fitting – no hose clamps
Maximum Working
Pressure: 300 PSI
Working Temperature
Range: -40ºF – 130ºF
• Tough, flexible contractor grade rubber – provides a non-marking,
abrasion resistant cover
• Rubber core – resists oil from compressors
• Lightweight hose and anodized aluminum fittings – less fatigue
• Lays straight and flat – will not kink or curl – reduces tripping hazard
43
Pressure Washers
The Subaru® premium industrial engines that power RIDGID® pressure washers give you advantages competitive engines
can’t match. Like the extra durability of cast-iron cylinder liners, dual ball-bearing crankshafts, and hardened-steel timing
chain, cam and gears. Higher torque, quieter operation, and easier starting.
The performance ratings of RIDGID® pressure washers are determined in accordance with the PW 101 testing protocol
which is developed and released by the Pressure Washers Manufacturers Association (PWMA). This reassures you that
your RIDGID® pressure washer will handle your toughest projects with ease.
3000 PSI, 2.6 GPM Premium Pressure Washer
Model number: RD80746 & RD80947
Specifications:
Max Pressure:
Max Water Flow:
Max Water
Inlet Temperature:
Pump Type : Engine: Net Horsepower: Starter Type: Weight:
3,000 PSI
2.6 GPM
104o F
direct drive
3-Piston axial cam
Subaru® SP170 OHC engine
5.7*
recoil
102 lbs.
*Power rating for the engine are measured in accordance with SAE J1349 at 4000 rpm
Includes:
30 ft., 9/32 in. non-marring semitranslucent high pressure hose, ergonomic
trigger handle with soft touch overmold
grip, stainless steel spray wand with
AutoLock quick-connect coupler, 0o,
15o, 25o, dual power soap quick-connect
nozzles soap quick-connect nozzles, 4
position nozzle holder with spring clip,
clear injection hose with inlet filter, nozzle
cleaning tool, 18 oz., 10W-30 engine oil
Features:
•Protective 1-1/4 in. tubing roll-cage frame design with quick
release fold down handle – for fast and easy set-up and storage
•Powered by Subaru® SP170 OHC engine – supplies the power needed for the job
•12 in. X 3 in. never flat solid rubber wheels – can traverse rough terrain
•30 ft. 9/32 in. non-marring semi-translucent high-pressure hose with quick-connect couplers – attaches quickly and easily
•Maintenance-free axial cam pump – for easy starting and longer life
•1-1/4 gallon on-board detergent storage tank plus integrated universal 1-gallon container holder – makes using detergents easier and convenient
•Heavy-duty trigger handle with over-mold grip, removable and adjustable auxiliary handle – ergonomic design maximizes user comfort
•Stainless steel spray wand with AutoLock quick-connect coupler – allows fast nozzle change capability
•3 contractor grade quick connect nozzle tips – custom design makes tip changes faster and easier
•Dual power soap quick-connect nozzles soap nozzle – for far
reaching and also short range detergent application
NEW
44
World-renowned as “The Pumps with Nine Lives,” CAT® triplex plunger pumps team up
with Subaru® engines to give this RIDGID® pressure washer continuous dependability,
high-density, hardened and polished plungers, special alloys, and tight tolerances.
3300 PSI / 2.8 GPM Premium Pressure Washer
Model number: RD80763 & RD80964
Specifications:
Max Pressure:
MaxWater Flow:
Max Water:
Inlet Temperature:
Pump Type: Engine:
Net Horsepower: Starter Type: Weight:
3,300 PSI
2.8 GPM
o
104 F
CAT® triplex plunger
3DNX27GSI
Subaru® EX21 OHC
engine, Low oil Indicator
6.8*
recoil
85 lbs.
*Power rating for the engine are measured in accordance with SAE J1349 at 4000 rpm
Includes:
30 ft., 9/32 in. steel braided non-marring
high pressure hose, ergonomic trigger
handle with soft touch overmold grip,
stainless steel spray wand with AutoLock
quick-connect coupler, 0o, 15o, 25o, 40o, dual power soap quick-connect
nozzles soap quick-connect nozzles, 5
position nozzle holder with spring clip,
clear siphoning tube with inlet filter,
nozzle cleaning tool, 18 oz., 10W-30 engine oil
Features:
•Innovative zero gravity protective roll cage frame design – quick release fold down handle plus sky hook for fast and easy
set-up and storage
•30 ft. 9/32 in. steel braided semi-translucent high pressure hose
with quick connect couplers – attaches quickly and easily and
ensures no marring
•Powered by Subaru® EX21 commercial-grade OHC engine, plus muffler shield – supplies the power to do heavy jobs
•12 in. X 4 in. wheel with steel rims – for convenient, always ready transport
•CAT® triplex plunger pump with ceramic pistons – provides ultra-durable long lasting performance
•Heavy-duty trigger handle with overmold grip, removable and adjustable auxiliary handle – ergonomic design maximizes user comfort
•5 Position nozzle storage holder with spring clip – designed to go with the user
•Heavy-duty stainless steel wand with AutoLock quick-connect coupler – allows fast nozzle change capability
•4 Contractor grade quick connect nozzles – custom design makes tip changes faster and easier
•Dual power soap quick-connect nozzles soap nozzle – for far
reaching and also short range detergent application
NEW
CAT® Triplex Plunger Pump
with Ceramic Pistons
Provides ultra-durable, long lasting performance
45
WET/DRY VACS
For just about any jobsite mess, there’s a RIDGID® Wet/Dry vac that’s up to the task. From rugged, reliable, allaround performers to the versatile, high performance models needed to satisfy the most demanding professionals,
our vacs get the job done quickly. All our vacs feature extra long cords and flexible, Tug-A-Long™ hoses.
A host of convenient accessories and filters further maximize your efficiency on the jobsite.
16 Gallon Stainless Steel Vac
Model number: WD1950
Specifications:
Features:
Gallon Size:
• Tough, stainless steel drum
16
Motor:
• Peak Horsepower: 6.5
• Voltage: 120
• Amps: 12.0
•Powerful suction handles jobsite clean-up
Cord Length: 20 ft.
•Push cart handle collapses for easier storage
Replacement Filter: VF5000 or
VF6000
•Accessories are always at hand in accessory bag
•Quick release handle for easily emptying drum contents
•Scroll Noise Reduction (SNR) provides quiet performance
•Oversized 8 in. rear wheels navigate any jobsite terrain
Includes:
2 extension wands, 2-1/2 in. x 7 ft. positive locking hose,
utility nozzle, wet nozzle, multipurpose tool, crevice tool,
and Microban® treated 3-layer fine dust filter
16 Gallon/6.5 Peak HP Vac
46
Specifications:
Features:
Gallon Size:
•Large capacity for professional use
16
Motor:
• Voltage: 120
• Amps: 12.0
Cord Length: 20 ft.
•Oversized 8 in. rear wheels navigate any jobsite terrain
VF6000
Includes:
2 extension wands, 2-1/2 in. x 7 ft. positive locking hose, utility
nozzle, wet nozzle, multipurpose tool, crevice tool, noise muffler,
and Microban® treated 3-layer fine dust filter
14 Gallon Vac
Specifications:
Features:
Gallon Size:
• Large capacity for professional use
14
Motor:
• Voltage: 120
• Amps: 11.0
Cord Length: 20 ft.
Includes:
VF6000
2 extension wands, 2-1/2 in. x 7 ft. positive locking hose, utility
nozzle, wet nozzle, multipurpose tool, and Microban® treated
3-layer fine dust filter
Pro Pack
Specifications:
Features:
Gallon Size:
• High performance vac in a compact size
4.5
Motor:
• Voltage: 120
• Amps: 9.0
•Accessories/cord/hose store inside vac under hinged lids
Cord Length: 20 ft.
Includes:
Replacement Filter: VF3500
1-7/8 in. x 5 ft. – 7 ft. expandable hose, utility nozzle, crevice
tool, dusting brush, and Microban® treated 3-layer fine dust filter
•Portable, 15.5 lb. unit is easily stacked and stored
•Offers more performance than other compact vacs
Portable Air Mover
Model number: AM2550
Specifications:
Features:
Motor: 5.0 Amps
•3-Speeds up to 1600 CFM
Speeds: 3
•Wheels and retractable handle for convenient mobility
Power Cord: 30 ft.
•Quickly dry wet floors, drywall mud, etc.
Weight: 35 lb.
•Quiet long lasting motor
•Provides ventilation and air circulation
47
WET/DRY Vac Accessories
For a complete list of RIDGID® vac accessories, please go to www.ridgidparts.com
Wet/Dry Vac Pump Accessory
Model number: VP2000
Features:
•Quickly remove water from wet/dry vac drum
•Versatile – attaches to any RIDGID® wet/dry vac with a drain
•Pumps water at 10 gallons per minute and up to 40 feet high
•Use any standard 5/8 in. garden hose with pump accessory to
evacuate water (garden hose not included)
4X Pro Hose
Model number: VT2570
Features:
•4 times more durable than the standard RIDGID® hose
•1-7/8 in. diameter hose provides powerful suction to handle jobsite clean-up
•Easily move throughout workspace with 10 ft. hose length
•Use as replacement hose or extension kit for all RIDGID® vacs
•Flexible and resists collapsing
Fine Dust Filters
Captures fine dust particles such as cement and drywall dust.
Microban® antimicrobial protection fights and inhibits the growth
of mold, mildew and bacteria that can shorten filter life. Microban
protection is built into the fibers during the manufacturing process,
so it won’t wash off or wear away, giving antimicrobial protection
that lasts the useful lifetime of the filters.
48
Dust Bags
Includes 2 high-efficiency dry pick-up
dust bags. Fine particle clean-up of non-toxic,
non-hazardous, non-flammable materials.
Model #
Fits Gallon Sizes
Fits Model #'s
Microban®
Model #
Includes
Fits Model #'s
VF5000
5 – 20 Gallon
WD0625, WD1245, WD1665,
WD5500, WD1450, WD1850,
WD1950
Yes
VF3502
2 high-efficiency dry
pick-up dust bags
WD1450, WD1850,
WD1950
VF3500
4 – 4.5 Gallon
WD4050, WD4550
Yes
Inspection
See it. Find it. Solve it.™
Identifying the problem, and its location, is the first and often toughest part of the fix. The SeeSnake®
micro™ inspection camera makes that easy. Once you know what you are up against, you can accurately
implement the solution. For its part in the fix, the SeeSnake® micro™ inspection camera comes with several
attachments that can speed up the solution.
SeeSnake® micro™
Model number: 783 670
Specifications:
Camera Resolution:
160 x 234 pixels
Camera Diameter:
0.7" (17 mm)
Lighting:
2 Adjustable LEDs
Cable Reach:
3' (expandable to 30'
with optional extensions)
Power Source:
4 AA Batteries
(3 hrs. of continuous run-time)
Weight:
1.2 lbs (0.5 kg)
Features:
• Waterproof Camera Head and Cable Cable to 10'
(when properly assembled)
• Fully Adjustable LED Lighting
• Flexible 3' Cable
• Twist and Lock Attachments
• Comfort Grip
• High Visibility 2.4 Inch Color LCD
Includes:
Mirror, Hook & Magnet
49
T3 – TITANIUM Saw blades
RIDGID® T3 – Titanium coated saw blades are so advanced, they leave the others in the saw-dust. The T3
coating protects the blade from heat and corrosion. This advanced coating reduces friction and requires
less amp draw for increased power tool performance and extended cutting life. Our reduced vibration
technology delivers a quieter, smoother running blade and heat expansion slots extend blade life. Our laser cut thin
kerf design provides accuracy, precision and performance. Engineered tensioning keeps the blade running true and flat.
Large micrograin carbide tips hold their edge longer and produce ultra-fine finishes so your cuts are spot on–the first
time. The Ultimate Polished Finish saw blades feature a unique side grind that delivers cuts so smooth that it eliminates
the need for sanding. Experience the ultimate in performance, protection and cutting life.
Super-Thin Kerf Framing
Ultimate super-thin kerf saw blades provide fast cuts with less effort. These advanced
designed saw blades maximize performance as well as cuts per charge when utilized
with cordless power tools.
Description
Model #
Dia.
Teeth Arbor Tooth Type
Kerf
Plate
Grind
Hook Angle
Framing
R0724B
7 1/4 in.
24
5/8 in.
Carbide
.059 in.
.039 in.
ATB
+18º
Framing
R0624B
6 1/2 in.
24
5/8 in.
Carbide
.059 in.
.039 in.
ATB
+18º
Grind
Hook Angle
Combination
Ultimate combination saw blades utilize a configuration of five (5) teeth: one (1) flat tooth
for ripping and four (4) alternate top bevel teeth for crosscutting followed by a large
gullet for effective chip removal that delivers a premium quality cut in every application.
Description
Model #
Dia.
Teeth
Arbor
Tooth Type
Kerf
Plate
Combination
R1260C
12 in.
60
1 in.
Carbide
.098 in.
.071 in.
ATB+R
+15º
Combination
R1050C
10 in.
50
5/8 in.
Carbide
.098 in.
.071 in.
ATB+R
+15º
Ultimate Polished Finish
Ultimate polished finish saw blades produce a 220 grit sanded finish!
The polished multi-stage tooth grind polishes the material as it cuts
for a 220 grit sanded finish that requires no rework.
Description
Model #
Dia.
Teeth
Arbor
Tooth Type
Kerf
Plate
Grind
Hook Angle
Ultimate Polished
R12100
12 in.
100
1 in.
Carbide
.091 in.
.071 in.
ATB
+10º
Ultimate Polished
R1090C
10 in.
90
5/8 in.
Carbide
.091 in.
.071 in.
ATB
+10º
Ultimate Polished
R1060C
10 in.
60
5/8 in.
Carbide
.091 in.
.071 in.
ATB
+15º
Polished Multi-Stage Tooth Grind
Enhanced side grind tooth polishes material as it cuts
for minimized sanding rework (finishing blades only).
50
Bi-Metal Hole Saws
Model #
Bi-Metal
Hole saws
Product Code
Hole Diameter
Depth of Cut
7010
E0101918
3/4 in.
1 7/8 in.
7011
E0101919
7/8 in.
1 7/8 in.
7012
E0101920
1 in.
1 7/8 in.
7013
E0101921
1 1/8 in.
1 7/8 in.
7014
E0101922
1 1/4 in.
1 7/8 in.
7015
E0101923
1 3/8 in.
1 7/8 in.
7016
E0101924
1 1/2 in.
1 7/8 in.
7017
E0101925
1 5/8 in.
1 7/8 in.
7018
E0101926
1 3/4 in.
1 7/8 in.
7019
E0101927
1 7/8 in.
1 7/8 in.
7020
E0101928
2 in.
1 7/8 in.
7021
E0101929
2 1/8 in.
1 7/8 in.
7022
E0101930
2 1/4 in.
1 7/8 in.
7023
E0101931
2 3/8 in.
1 7/8 in.
7024
E0101932
2 1/2 in.
1 7/8 in.
7025
E0101933
2 3/4 in.
1 7/8 in.
7026
E0101934
3 in.
1 7/8 in.
7027
E0101935
3 1/4 in.
1 7/8 in.
7028
E0101936
3 1/2 in.
1 7/8 in.
7029
E0101937
4 in.
1 7/8 in.
7030
E0101938
4 1/4 in.
1 7/8 in.
7031
E0101939
4 1/2 in.
1 7/8 in.
Model #
7032
E0101940
5 in.
1 7/8 in.
7034
7033
E0101941
6 in.
1 7/8 in.
1-Pc. Bi-Metal Hole Saws
Includes mandrel (purchase pilot drill separately).
Model #
RIDGID® bi-metal hole saws are manufactured using the CG Power
process. CG power is state of the art technology for making metals
stronger, creating a 50% faster and more durable hole saw. Large
openings provide easier removal of cut materials and increased
visibility while cutting. These hole saws can cut through a 2 x 4
in a single pass and are ideal for heavy duty cutting in metals,
aluminum, brass, wood and plastic.
12 in. Hole Saw Extension
Holds any 3/8 in. round or hex shank
tool. 12 in. length for drilling deep holes
or for hard to reach areas. Flats on the
shank provide positive driving action.
Model #
7035
Product Code
Length
E0101943
12 in.
1/4 in. Pilot Drill
Replacement pilot drill for bi-metal
hole saws and mandrels.
Product Code
Diameter
E0101942
1/4 in.
Hole Saw Mandrel with Pilot Drill
Product Code
Hex Shank
Pin Drive,
Positive Lock
Fits Bi-Metal
Hole Saws
7036
E0101944
3/8 in.
Yes
1 1/4 – 6 in.
1 7/8 in.
7037
E0101945
3/8 in.
–
3/4 – 2 in.
1 1/2 in.
1 7/8 in.
7038
E0101946
7/16 in.
Yes
1 1/4 – 6 in.
2 in.
1 7/8 in.
E0101915
2 1/8 in.
1 7/8 in.
E0101917
2 1/2 in.
1 7/8 in.
Product Code
Hole Diameter
Depth of Cut
7002
E0101910
1 in.
1 7/8 in.
7003
E0101911
1 1/4 in.
7004
E0101912
7006
E0101914
7007
7009
Model #
51
Cobalt Drill Bits
RIDGID® cobalt drill bits are manufactured using the CG Power process. CG Power is state of the art
technology for making metals stronger, creating a 44% faster and highly durable/wear resistant drill bit.
These drill bits feature a 143˚ split point for drilling on contact and a non-slip shank for a secure grip.
Model #
Product Code
Size
Non-Slip Shank
6750
E0101803
1/16 in.
–
6751
E0101804
5/64 in.
–
6752
E0101805
3/32 in.
–
6753
E0101806
7/64 in.
–
6754
E0101807
1/8 in.
–
6755
E0101808
9/64 in.
–
6756
E0101809
5/32 in.
–
6757
E0101810
11/64 in.
–
6758
E0101811
3/16 in.
–
6759
E0101812
7/32 in.
Yes
6760
E0101813
1/4 in.
Yes
6761
E0101814
5/16 in.
Yes
6762
E0101815
3/8 in.
Yes
6763
E0101816
7/16 in.
Yes
6764
E0101817
1/2 in.
Yes
14-Pc Cobalt Drill Bit Set
Model number: 6765 – Product code: E0101818
Includes: (2) 1/16 in., 5/64 in., 3/32 in., 7/64 in., (2) 1/18 in., 9/64 in., 5/32 in., 3/16 in., 7/32 in., 1/4 in.,
5/16 in., and 3/8 in. cobalt drill bits and metal case
13-Pc Bi-Metal Hole Saw Set
Includes: 3/4 in., 7/8 in., 1 1/8 in., 1 3/8 in., 1 1/2 in., 1 3/4 in., 2 in., 2 1/4 in., and 2 1/2 in. bi-metal hole
saws, two mandrels and two pilot drills in a heavy-duty case
6-Pc Bi-Metal Hole Saw Set
Includes: 7/8 in., 1 in., 1 1/8 in., 1 1/4 in. and 1 1/2 in. bi-metal hole saws, mandrel and adapter in a heavy-duty case
52
Extension Cords
Single Connection Extension Cords
Model #
Length
Gauge
Prong
Powerlight
Plug
Capability
Temperature
Cord Jacket
Kink Free
Cord
Grade
AMP
Volts
Max
Watt
Insulate
Voltage
214026
100 ft.
12
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Heavy Duty
Contractor
15
125
1875
300
866886
100 ft.
10
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Extra
Heavy Duty
Contractor
10
125
1875
300
214012
50 ft.
12
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Heavy Duty
Contractor
15
125
1875
300
214057
25 ft.
14
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Medium Duty
Contractor
13
125
1875
300
214074
50 ft.
14
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Medium Duty
Contractor
13
125
1875
300
214088
100 ft.
14
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Medium Duty
Contractor
13
125
1875
300
729706
50 ft.
10
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Extra
Heavy Duty
Contractor
15
125
1875
300
520840
25 ft.
14
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Medium Duty
Contractor
13
125
1875
300
Tri Tap Extension Cords (3 Receptacles)
165271
50 ft.
12
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Heavy Duty
Contractor
15
125
1875
300
524646
25 ft.
14
3
Yes
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Medium Duty
Contractor
13
125
1875
300
-58ºF – 167ºF
Flexible, Weather
Resistant
Yes
Heavy Duty
Contractor
15
125
1875
600
3 Prong To Twist Lock Adapter
112712
9 in.
12
3
–
53
ON-SITE STORAGE CHESTS
Common Storage Chest Features:
• Full length cover handle – slip resistant for easy opening
• Durable, baked enamel finish – provides heavy-duty, long lasting protection
• Fully arc welded construction – tighter tolerances ensure durability
• Overlapping cover design – superior weather resistance and security
• Solid lock tang – for superior security and pry resistance
• Solid 1 piece 12 ga. skids – for greater strength and stability
• Locking cover support – secures cover in open position, prevents
accidental closure
• Ergonomic, recessed handles – 90˚ stop provides
maximum leverage
Compact/Portable Truck Bed/Jobsite Storage Chest
Model number: 2032-OS
Specifications:
Dimensions: 32 in. x 19 in. x 18-1/4 in.
Weight: 77 lb.
Storage: Options: 404-OS casters
5 cu. ft.
Large Truck Bed/Jobsite/Industrial Storage Chest
Specifications:
Additional Features:
Dimensions: 48 in. x 24 in. x 28 in.
Weight: 149 lb.
16 cu. ft.
• Rapid Pass™, pass through cord access – for power
tool charging
• Flexi Shelf™ – 8 in. adjustable bin storage
Bulk Jobsite/Industrial Storage Chest
Specifications:
Additional Features:
Dimensions: 60 in. x 30 in. x 37 in.
Weight: 225 lb.
31 cu. ft.
• Slant top design allows easy access to tools and
support brackets will hold the cover level for use as
a table top
4" Diameter Casters Set
Includes: Two swivel and two fixed
Ultimate Security
Corner located lock housings permanently retain the lock and recess the shackle;
saves time, prevents lost locks and access by saws, pry bars and cutters while
maximizing internal storage and access.
54
* Locks not included.
Awards
6 ½" Compact Framing Saw
Model number: R3203 page 18
Editor’s Choice
Tools of the Trade – May/June 2007
«
MVP – Most Valuable Products
Building Products – August 2007
«
Best Value HANDY Magazine – November/December 2007
13" Thickness Planer with 3-Blade Cutterhead
«
Editor’s Choice American Woodworker – October 2007
Oscillating Edge Belt/Spindle Sander
«
Model number: EB4424 page 35
Best Overall/Best Value Fine Woodworking Tools & Shops Annual Issue – Winter 2006/2007, No. 188
24V XLi™ Technology
«
Model number: R931 & R85005 page 4, 9
Editor’s Choice Tools of the Trade – May/June 2006
7 ¼" Wormdrive Saw
«
MVP – Most Valuable Product
Building Products – July/August 2005
Editor’s Choice
Tools of the Trade – May/June 2005
«
Best Buy
Best Value
American Woodworker – July 2005
HANDY – September/October 2005
Best Value
Fine Homebuilding - September 2004
«
Top Value Workbench Magazine - June 2004
55
Warranties
Covered For LIFE
The Industry’s Only FREE Lifetime Coverage.
FREE Parts. FREE Service. FREE Batteries.
*
Lifetime Service Agreement – Power Tools & Pneumatic Nailers/Staplers
To accept the RIDGID® Brand Lifetime Service Agreement, you must register your qualifying RIDGID® Brand Hand Held Power Tool, Stationary Power
Tool or Pneumatic Nailers/Stapler only within 90 days after purchase. For expedited handling, register by logging on to www.RIDGID.com. You may
also register by US mail - simply photocopy and complete the adjacent form and mail it to the address below. Include on the form all qualifying
RIDGID® product(s) purchased with model number from package, and the serial number for each individual serialized product including batteries and
chargers. (Please specify if the product is a combo power tool kit.) Then mail the form together with a copy of your store receipt and the original UPC
from the package of the qualifying product to:
RIDGID® Hand Held and Stationary Power Tool Technical Service,
PO Box 1427, Anderson, SC 29622
All registrations must be made under the name of an individual person. Within approximately 6-8 weeks after completion of the registration process,
you will receive confirmation via e-mail or US mail that will include your Lifetime Service Agreement Identification Number. Keep track of this
number. You will need it in order to obtain service for your product under the Lifetime Service Agreement.
The Lifetime Service Agreement is only offered on tools in this catalog where the Lifetime Service Agreement logo appears in conjunction with the
specific product. Tools not registered for the Lifetime Service Agreement are still backed by the 3-Year Limited Service Warranty. For complete details
of the Lifetime Service Agreement, see www.RIDGID.com.
56
Lifetime Service Agreement
Registration Form
1. Complete the entire form to ensure eligibility and mail along
with a copy of the original receipt with an arrow pointing to
the qualifying RIDGID® purchases. Please include original
UPCs from the packages.
Or register on www.RIDGID.com and mail a copy of the original
receipt with an arrow pointing to the qualifying RIDGID®
purchases. Please include original UPCs from the packages.
2. Mail these items to:
RIDGID® Hand Held and Stationary Power Tool Technical Service PO Box 1427Anderson, SC 29622
For what projects do you use power tools?
o Work o Personal
For what type of work do you use your RIDGID® power tools?
o General Contractor o Finishing/Cabinets o Drywall o HVAC
o Metal Fabrication o Wood Framing o Electrical o Stone/Tile
o Plumbing/Pipe Fitting o Concrete/Mason o Other: Please identify ______________________________________
What level of involvement do you have in the purchase of
tools at your company?
Select one: o Decision Maker o Regular Input o Request Tools o N/A
How much have you spent on power tools or power tool accessories
in the last year?
o More than $10,000 o $5,000 to $10,000 o $2,500 to $5,000
o $1,000 to $2,500 o $500 to $1,000 o Less than $500
o Yes, RIDGID® may contact me, as indicated, with additional information
or promotions and products. Initial here _____________
Please print in the spaces provided below
First Name
Last Name
Street Address
City
State
ZIP Code
Telephone (including area code)
E-Mail Address
Date of Birth (month-day-year)
Company Name
Model number on package
Serial number of each tool(s) located on each tools’ data plate
Serial number of each battery if applicable
Serial number of charger if applicable
example: data plate
example: UPC
57
58
Covered For Life
Page 56
«
Warranties
3-Year Limited Service Warranty – Power Tools
This warranty on RIDGID® Hand Held and Stationary Power Tools covers all defects in workmanship or materials and normal
wear items such as brushes, chucks, motors, switches, cords, gears and even cordless batteries in this RIDGID® tool for three
years following the purchase date of the tool. Warranties for other RIDGID® products may vary. Tools that are eligible but not
registered for the Lifetime Service Agreement will be backed by this 3-Year Limited Service Warranty. For complete details of
the 3-Year Limited Service Warranty, see www.RIDGID.com.
Full Lifetime Warranty – Wet/Dry Vacs
RIDGID® Wet/Dry Vacs are warranted to be free of defects in workmanship and material. This warranty lasts for the lifetime
of the RIDGID® tool. To obtain the benefit of this warranty, please call 1-800-4-RIDGID (1-800-474-3443). Warranted products
will be repaired or replaced, at Ridge Tool Company’s option, and returned at no charge; or, if after three attempts to repair
or replace during the warranty period the product is still defective, you can elect to receive a full refund of your purchase
price. Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. For complete details of the
Full Lifetime Warranty, see www.RIDGID.COM
3-Year Limited Warranty – Air Compressors
This warranty covers all defects in workmanship or materials in this RIDGID® Air Compressor for the three-year period from
the date of purchase. All warranty communications should be directed to RIDGID® air compressor technical service at
(toll free) 1-800-4-RIDGID. To obtain service for this RIDGID® air compressor you must return it, freight prepaid, to a service
center authorized to repair RIDGID® air compressors. You may obtain the location of the service center nearest you by calling
(toll free) 1-800-4-RIDGID or by logging on to the RIDGID® website at www.ridgid.com. When requesting warranty service,
you must present the proof of purchase documentation, which includes a date of purchase. The authorized service center will
repair any faulty workmanship, and either repair or replace any defective part at no charge to you. For complete details of the
3-Year Limited Warranty, see www.RIDGID.com.
3-Year Limited Service Warranty – Pressure Washers
RIDGID® pressure washers are warranted to the original purchaser only to be free from defects in material and workmanship,
subject to certain exceptions and limitations stated below, for a period of three (3) years after date of purchase.
For commercial and / or rental use of models up to 3200 PSI, the warranty is limited to 120 Days after date of purchase.
Warranties for other RIDGID® products may vary. To obtain the benefit of this warranty, you can return the pressure washer to
your local Home Depot store or a service center authorized to repair RIDGID® pressure washers. You may obtain the location
of the service center nearest you by calling (toll free) 1-866-539-1710 or by logging on www.RIDGID.com. For complete details
of the 3-Year Limited Pressure Washer Warranty, see www.RIDGID.com.
59
Index
Pg #
US
SKU #
Canadian
SKU #
Catalog
Order #
Model #
6750
52
579-028
464-000
22448
6751
52
579-497
463-999
22453
Model #
60
Pg #
US
SKU #
Canadian
SKU #
Catalog
Order #
Model #
Pg #
US
SKU #
Canadian
SKU #
Catalog
Order #
7015
51
554-597
–
–
214012
53
214-012
–
–
7016
51
554-812
–
–
214026
53
214-026
–
–
6752
52
582-380
463-996
22458
7017
51
554-883
–
–
214057
53
214-057
–
–
6753
52
583-597
463-985
22463
7018
51
554-901
–
–
214074
53
214-074
–
–
6754
52
585-485
463-971
22468
7019
51
554-931
–
–
214088
53
214-088
–
–
6755
52
588-080
464-001
22473
7020
51
554-995
–
–
520840
53
520-840
–
–
6756
52
589-870
463-988
22478
7021
51
555-350
–
–
524646
53
524-646
–
–
6757
52
127-629
463-987
22483
7022
51
555-385
–
–
729706
53
729-706
–
–
6758
52
133-700
463-986
22488
7023
51
555-120
–
–
866886
53
866-886
–
–
6759
52
133-925
463-954
22493
7024
51
555-989
–
–
2032-OS
54
410-951
–
17093
6760
52
133-990
463-993
22498
7025
51
556-578
–
–
2048-OS
54
410-021
–
17098
6761
52
134-252
463-991
22503
7026
51
556-670
–
–
3068-OS
54
420-236
–
17108
6762
52
135-805
463-962
22508
7027
51
556-706
–
–
404-OS
54
420-476
–
26238
6763
52
137-566
463-959
22513
7028
51
556-901
–
–
783 670
49
783-670
–
–
6764
52
137-935
463-955
22518
7029
51
556-930
–
–
AC4020
43
–
–
–
7002
51
557-815
–
–
7030
51
556-947
–
–
AC4618
9
737-681
497-197
–
7003
51
557-994
–
–
7031
51
557-121
–
–
AC470013
9
–
–
–
7004
51
557-999
–
–
7032
51
557-597
–
–
AC471811
9
492-656
7006
51
558-018
–
–
7033
51
557-728
–
–
AC85008
9
–
–
25403
7007
51
558-036
–
–
7034
51
550-334
–
–
AC9944
31
984-386
465-258
–
7009
51
558-226
–
–
7035
51
553-468
–
–
AM2550
47
#N/A
#N/A
21113
7010
51
553-475
–
–
7036
51
627-941
–
–
BS1400
33
428-344
404-565
14653
7011
51
553-610
–
–
7037
51
550-378
–
–
CM1450
35
428-514
404-551
10888
7012
51
554-017
–
–
7038
51
553-410
–
–
DP1550
33
430-264
404-571
14658
7013
51
554-227
–
–
112712
53
112-712
–
–
E0101818
52
–
–
–
7014
51
554-356
–
–
165271
53
165-271
–
–
E0101947
52
–
–
–
Index
Pg #
US
SKU #
Canadian
SKU #
Catalog
Order #
E0101948
52
–
–
–
EB4424
35
428-230
400-488
14663
Model #
Pg #
US
SKU #
Canadian
SKU #
Catalog
Order #
Model #
Pg #
US
SKU #
Canadian
SKU #
Catalog
Order #
R250SFA
39
301-501
406-343
21173
R8408
8
734-637
495-876
–
R26001
25
370-658
168-688
23963
R86111
6
731-738
507-919
–
Model #
GP90135
43
250-012
179-413
17048
R2611
24
370-834
177-133
23963
R8804
13
593-204
127-919
24003
JP0610
34
428-428
405-795
14668
R2720
23
548-680
417-800
22158
R8823
13
593-085
458-853
24013
MS1065LZA
29
187-029
404-587
25393
R2740
23
733-594
495-872
–
R883
13
593-060
432-477
24008
MS1250LZA
29
187-336
153-689
25408
R29301
22
594-249
155-524
25388
R884
12
592-870
127-918
23943
MS1290LZA
28
295-598
151-486
17038
R3001
20
371-880
168-692
24073
R885
11
588-955
127-800
24018
OF25135
43
–
–
–
R3020
20
977-209
475-502
–
R888
12
589-044
174-360
23948
OL45150
42
250-638
179-481
26243
R31211
20
371-533
177-132
14708
R931
4
995-871
466-280
–
OL50135A
42
195-481
–
–
R3201
19
371-590
487-588
25418
R964
5
836-027
507-942
–
OL50145MW
41
696-643
507-950
–
R3203
18
222-089
432-021
24073
RD80746
44
355-820
–
–
R0624B
50
352-537
–
21053
R3210
19
387-811
402-158
20558
RD80763
45
358-754
–
–
R0724B
50
588-791
143-982
23983
R350CHA
38
303-011
406-540
21158
RD80947
44
357-382
–
–
R1001
21
241-522
–
21058
R350FCA
38
–
484-157
–
RD80964
45
359-932
–
–
R1020
21
942-359
507-993
–
R350PNA
38
767-360
485-633
21153
TS2410LS
30
428-833
155-721
14633
R1060C
50
588-829
144-382
21068
R350RHA
37
303-379
–
25348
TS3660
32
105-495
497-183
–
R1090C
50
588-847
144-442
21078
R4121
27
729-907
484-149
–
VF3500
48
503-642
–
–
21073
R12100
50
588-945
144-495
R1260C
50
588-936
144-472
R138HPA
40
–
495-411
–
21183
R150FSA
40
301-661
416-710
R175RND
39
303-457
416-894
R4330
34
429-753
484-118
–
VF3502
48
515-888
–
–
R5011
15
190-876
174-356
20563
VF5000
48
335-151
–
26453
R5013
16
909-941
475-744
–
VP2000
48
383-662
–
24608
R6000
17
193-774
406-500
20578
VT2570
48
385-797
141-960
18718
R70002
17
387-985
401-467
25413
WD1450
47
255-156
185-535
18723
R213BNA
40
303-503
406-534
21178
R7111
16
168-039
402-671
23958
WD1850
46
255-185
185-430
22708
R2400
22
406-168
418-275
20568
R7121
17
371-550
168-465
24598
WD1950
46
386-239
850-68
26458
R25001
25
370-463
168-437
R82007
7
589-891
507-953
–
R250AFA
39
300-560
406-528
R82233
6
407-459
–
20583
21168
61
Covered For LIFE
The Industry’s Only FREE Lifetime Coverage.
FREE Parts. FREE Service. FREE Batteries.
r the Lifetime Service Agreement. Visit www.RIDGID.com or fill out a registration form t
o register.
quired fo
Registration re Lifetime Service Agreement can be found on the website, registration form, or by calli
ng 1-866-539-1710.
e
Details about th d on these products and the combination of orange and grey are trademarks for RIDGI
D® brand power tools.
u se
The orange color
RIDGID® is a registered trademark of RIDGID, Inc. and used under license.
3RD2008CTLG

POWERFUL. DURABLE. 2008 Product Guide PROFESSIONAL.

Transcription

Similar documents

Ridgid R4510 Table Saw with TSUV

Thread Cutting Oil Family

Paul Strisik NA - American Fine Art Magazine

SC-2300 spec

RC-2375 Cat Sheet

Notice W Pocket GB mollette

S5425010001 Bahco Chisels 434 10 MM Classification Brand

10020A Pendleton - Standard Furniture

kutrimmer 1043 tabletop trimmer

Junkers Ju 86B Stuka